Architectural lighting Architekturbeleuchtung Accent and effect lighting Akzent- und Effektbeleuchtung Room lighting: ceiling light, cove lighting,
|
|
- Josef Brinkerhoff
- vor 6 Jahren
- Abrufe
Transkript
1 DURIS P 5 Datasheet Draft Version 0.0 High-efficacy mid-power LED with long lifetimes also at high currents and high junction temperatures. Hocheffiziente LED mittlerer Leistungsklasse mit langer Lebensdauer auch bei hohen Strömen und hohen Sperrschichttemperaturen. Features: Besondere Merkmale: Package: SMT package Gehäusetyp: SMT Gehäuse Viewing angle at 50 % I V : 120 Abstrahlwinkel bei 50 % I V : 120 Color: 525 nm ( true green ) Farbe: 525 nm ( true green ) Luminous Flux: typ. 26 lm Lichtstrom: typ. 26 lm Luminous efficacy: typ. 80 lm/w Lichtausbeute: typ. 80 lm/w Corrosion Robustness: Superior Corrosion Korrosionsstabilität: Höchste Robustness Korrosionsbeständigkeit Applications Anwendungen Architectural lighting Architekturbeleuchtung Accent and effect lighting Akzent- und Effektbeleuchtung Room lighting: ceiling light, cove lighting, Raumbeleuchtung: Deckenbeleuchtung, chandeliers, pendants, sconces Nischenbeleuchtung, Kronleuchter, Hängeleuchten, Wandleuchter Channel letters Leuchtlettern Linear lights Linearbeleuchtung
2 Ordering Information Bestellinformation Type: Luminous Flux 1) page 20 Ordering Code Typ: Lichtstrom 1) Seite 20 Bestellnummer I F = 100 ma Φ V [lm] -GRGT Q65111A4406 -GSGU Q65111A4405 Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 5). Only one group will be shipped on each packing unit (there will be no mixing of two groups on each packing unit). E. g. -GSGU-26-1 means that only one group GS, GT, GU will be shippable for any packing unit. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one packing unit. E. g. -GSGU-26-1 means that only one wavelength group 2,3,4,5,6 will be shippable. -GSGU-26-1 means that the device will be shipped within the specified limits as stated on page 6In order to ensure availability, single wavelength groups will not be orderable (see page 6). In a similar manner for colors where forward voltage groups are measured and binned, single forward voltage groups will be shipped on any packing unit. E. g. -GSGU-26-1 means that only one forward voltage group K,L,M,N,P will be shippable. In order to ensure availability, single forward voltage groups will not be orderable (see page 5). Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 5). Es wird nur eine einzige Helligkeitsgruppe pro Verpackungseinheit geliefert. Z. B. -GSGU-26-1 bedeutet, dass in einer Verpackungseinheit nur eine der Helligkeitsgruppen GS, GT, GU enhalten ist. Um die Liefersicherheit zu gewährleisten, können einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt für die Farben, bei denen Wellenlängengruppen gemessen und gruppiert werden. Pro Verpackungseinheit wird nur eine Wellenlängengruppe geliefert. Z. B. -GSGU-26-1 bedeutet, dass in einer Verpackungseinheit nur eine der Wellenlängengruppen 2,3,4,5,6 enthalten ist (siehe Seite 6). -GSGU-26-1 bedeutet, dass das Bauteil innerhalb der spezifizierten Grenzen geliefert wird. Um die Liefersicherheit zu gewährleisten, können einzelne Wellenlängengruppen nicht bestellt werden. Gleiches gilt für die LEDs, bei denen die Durchlassspannungsgruppen gemessen und gruppiert werden. Pro Verpackungseinheit wird nur eine Durchlassspannungsgruppe geliefert. Z. B. -GSGU-26-1 bedeutet, dass nach Durchlassspannungsgruppen gruppiert wird. In einer Verpackungseinheit ist nur eine der Durchlassspannungsgruppen K,L,M,N,P enthalten (siehe Seite 5). Um die Liefersicherheit zu gewährleisten, können einzelne Durchlassspannungsgruppen nicht direkt bestellt werden
3 Maximum Ratings Grenzwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Operating temperature range T op C Betriebstemperatur Storage temperature range T stg C Lagertemperatur Junction temperature absolute * T j, abs 150 C Sperrschichttemperatur absolut * Junction temperature T j 125 C Sperrschichttemperatur Forward current Durchlassstrom (T S = 25 C) I F ma 2) page 20 Reverse current I R 200 ma Sperrstrom 2) Seite 20 ESD withstand voltage ESD Festigkeit (acc. to ANSI/ESDA/JEDEC JS HBM, Class 3B) V ESD 8 kv Note: Anm: * This is verified by testing 30 pieces. Pass criteria: No catastrophic failures allowed, luminous flux must be better than L70B50 after 1000 h. * Dieser Wert wird durch den Test von 30 Bauteilen abgesichert. Dabei dürfen keine Totalausfälle auftreten und der Lichtstrom muß nach 1000 h über L70B50 liegen
4 Characteristics (T S = 25 C; I F = 100 ma) Kennwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Wavelength at peak emission Wellenlänge d. emittierten Lichtes (typ.) λ peak 519 nm 3) page 20 Dominant Wavelength (min.) 3) Seite 20 Dominantwellenlänge (typ.) (max.) λ dom λ dom λ dom Spectral bandwidth at 50% I rel max (typ.) Δλ 33 nm Spektrale Bandbreite b. 50% I rel max Viewing angle at 50 % I V Abstrahlwinkel bei 50 % I V (typ.) 2ϕ 120 4) page 20 Forward voltage (min.) 4) Seite 20 Durchlassspannung Reverse voltage Sperrspannung (I R = 20 ma) Real thermal resistance junction / solder point 5) page 20 Realer Wärmewiderstand Sperrschicht / Lötpad 5) Seite 20 (typ.) (max.) V F V F V F (max.) V R 1.2 V (typ.) (max.) R th JS real 18 R th JS real 22 nm nm nm V V V K/W K/W "Electrical" thermal resistance junction / solder 5) page 20 point "Elektrischer" Wärmewiderstand Sperrschicht / 5) Seite 20 Lötpad (with efficiency η e = 17 %) (typ.) (max.) R th JS el 15 R th JS el 18 K/W K/W Note: Anm.: Individual forward voltage groups see next page Durchlassspannungsgruppen siehe nächste Seite
5 Brightness Groups Helligkeitsgruppen Group Luminous Flux 1) page 20 Luminous Flux 1) page 20 Luminous Intensity 6) page 20 Gruppe Lichtstrom 1) Seite 20 Lichtstrom 1) Seite 20 6) Seite 20 Lichtstärke (min.) Φ V [lm] (max.) Φ V [lm] (typ.) I V [cd] GR GS GT GU Note: The standard shipping format for serial types includes either a lower family group, an upper family group or a grouping of all individual brightness groups of only a few brightness groups. Individual brightness groups cannot be ordered. Anm.: Die Standardlieferform von Serientypen beinhaltet entweder eine untere Familiengruppe, eine obere Familiengruppe oder eine Sammelgruppe, die aus nur wenigen Helligkeitsgruppen bestehen. Einzelne Helligkeitsgruppen sind nicht bestellbar. 4) page 20 Forward Voltage Groups 4) Seite 20 Durchlassspannungsgruppen Group Gruppe (min.) V F [V] (max.) V F [V] K L M N P
6 3) page 20 Dominant Wavelength Groups 3) Seite 20 Dominant Wellenlängengruppen Group Gruppe (min.) λ dom [nm] true green (max.) λ dom [nm] Note: Anm.: No packing unit / tape ever contains more than one color group for each selection. In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe für jede Farbe enthalten
7 Group Name on Label Gruppenbezeichnung auf Etikett Example: GR-2-L Beispiel: GR-2-L Brightness Helligkeit Wavelength Wellenlänge GR 2 L Forward Voltage Durchlassspannung Note: Anm.: No packing unit / tape ever contains more than one group for each selection. In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe für jede Selektion enthalten
8 6) page 20 Relative Spectral Emission - V(λ) = Standard eye response curve Relative spektrale Emission - V(λ) = spektrale Augenempfindlichkeit Φ rel = f (λ); T S = 25 C; I F = 100 ma 6) Seite I rel 0.8 : true green : V λ λ [nm]
9 6) page 20 Forward Current 6) Seite 20 Durchlassstrom I F = f (V F ); T S = 25 C 6) page 20, 7) page 20 Relative Luminous Flux 6) Seite 20, 7) Seite 20 Relativer Lichtstrom Φ V /Φ V (100 ma) = f(i F ); T S = 25 C 250 I F [ma] Φ V Φ V (100mA) V F [V] I F [ma] 250 6) page 20 Dominant Wavelength Dominante Wellenlänge λ peak = f(i F ); T S = 25 C 6) Seite Δλ dom [nm] I F [ma]
10 6) page 20 Relative Forward Voltage Relative Vorwärtsspannung ΔV F = V F - V F (25 C) = f(t j ); I F = 100 ma 6) Seite 20 6) page 20 Relative Luminous Flux 6) Seite 20 Relative Lichtstrom Φ V /Φ V (25 C) = f(t j ); I F = 100 ma 0.4 ΔV F [V] Φ v Φ v (25 C) T j [ C] T j [ C] 6) page 20 Dominant Wavelength Dominante Wellenlänge λ dom = f(t j ); I F = 100 ma 6) Seite Δλ dom [nm] T j [ C]
11 Max. Permissible Forward Current Max. zulässiger Durchlassstrom I F = f (T) 280 I F [ma] 260 Gx DASPA1.xx : TS Do not use below 30 ma T S [ C]
12 8) page 20 Package Outline 8) Seite 20 Maßzeichnung Approximate Weight: Gewicht: ESD information: ESD Information: 30 mg 30 mg LED is protected by ESD device which is connected in parallel to LED-Chip. Die LED enthält ein ESD-Bauteil, das parallel zum Chip geschalten ist
13 8) page 20 Recommended Solder Pad Reflow 8) Seite 20 Empfohlenes Lötpaddesign Reflow-Löten soldering
14 Reflow Soldering Profile Reflow-Lötprofil Preconditioning: JEDEC Level 2 acc. to JEDEC J-STD-020D C T C 217 C t P t L OHA04525 T p 245 C 150 t S C s 300 t Profile Feature Profil-Charakteristik Ramp-up rate to preheat* ) 25 C to 150 C Time t S T Smin to T Smax Ramp-up rate to peak* ) T Smax to T P Liquidus temperature Time above liquidus temperature Peak temperature Time within 5 C of the specified peak temperature T P - 5 K Ramp-down rate* T P to 100 C Time 25 C to T P Symbol Symbol t S T L t L T P t P Minimum 60 Pb-Free (SnAgCu) Assembly Recommendation 2 3 K/s All temperatures refer to the center of the package, measured on the top of the component * slope calculation DT/Dt: Dt max. 5 s; fulfillment for the whole T-range Maximum OHA04612 Unit Einheit s K/s C s C s K/s s
15 8) page 20 Method of Taping 8) Seite 20 Gurtung
16 Tape and Reel Gurtverpackung 12 mm tape with 600 pcs. on 180 mm reel W 1 D 0 P 0 P 2 F E W A N 13.0 ±0.25 P 1 Label Direction of unreeling W 2 Direction of unreeling Leader: min. 400 mm * Trailer: min. 160 mm * *) Dimensions acc. to IEC ; EIA 481-D OHAY0324 Tape dimensions in mm (inch) Tape dimensions in mm (inch) W P 0 P 1 P 2 D 0 E F / ± 0.1 (0.157 ± 0.004) 4 ± 0.1 (0.157 ± 0.004) or 8 ± 0.1 (0.315 ± 0.004) 2 ± 0.05 (0.079 ± 0.002) 1.5 ± 0.1 ( ) 1.75 ± 0.1 (0.069 ± 0.004) 5.5 ± 0.05 (0.217 ± 0.002) Reel dimensions in mm (inch) Reel dimensions in mm (inch) A W N min W 1 W 2max 180 (7) 12 (0.472) 60 (2.362) ( (0.724) 0.079)
17 _< 10% RH. C). LEVEL If blank, see bar code label _< WET Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. Draft Version 0.0 Barcode-Product-Label (BPL) Barcode-Produkt-Etikett (BPL) OSRAM Opto Semiconductors (6P) BATCH NO: LX XXXX RoHS Compliant BIN1: XX-XX-X-XXX-X (1T) LOT NO: (9D) D/C: 1234 Pack: R18 DEMY 022 B_R999_ R (X) PROD NO: XX-XX-X-X (Q)QTY: (G) GROUP: ML 2 Temp ST 260 C R OHA04563 Dry Packing Process and Materials Trockenverpackung und Materialien OSRAM Moisture-sensitive label or print Barcode label Humidity indicator Barcode label 15% 10% Comparator check dot 5% If wet, parts still adequately dry. change desiccant If wet, examine units, if necessary bake units If wet, examine units, if necessary bake units CAUTION This bag contains MOISTURE SENSITIVE OPTO SEMICONDUCTORS 1. Shelf life in sealed bag: 24 months at < 40 C and < 90% relative humidity (RH). 2. After this bag is opened, devices that will be subjected to infrared reflow, vapor-phase reflow, or equivalent processing (peak package body temp. If blank, see bar code label a) Mounted within at factory conditions of 30 C/60% RH. Floor time see below b) Stored at 3. Devices require baking, before mounting, if: a) Humidity Indicator Card is > 10% when read at 23 C ± 5 C, or b) 2a or 2b is not met. 4. If baking is required, reference IPC/JEDEC J-STD-033 for bake procedure. Bag seal date (if blank, seal date is identical with date code). Date and time opened: Moisture Level 1 Floor time > 1 Year Moisture Level 4 Floor time 72 Hours Moisture Level 2 Floor time 1 Year Moisture Level 5 Floor time 48 Hours Moisture Level 2a Floor time 4 Weeks Moisture Level 5a Floor time 24 Hours Moisture Level 3 Floor time 168 Hours Moisture Level 6 Floor time 6 Hours Desiccant Humidity Indicator MIL-I-8835 OSRAM OHA00539 Note: Anm.: Moisture-sensitive product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter Tape and Reel under the topic Dry Pack. Here you will also find the normative references like JEDEC. Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte. Bezüglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel Gurtung und Verpackung unter dem Punkt Trockenverpackung. Hier sind Normenbezüge, unter anderem ein Auszug der JEDEC-Norm, enthalten
18 _< 10% RH. C). If blank, see bar code label _< (1T) LOT NO: 11 (9D) D/C: LSY T676 Bin1: P-1-20 Bin2: Q-1-20 Bin3: ML Temp ST C R 2a 240 C R C RT Additional TEXT R077 PACKVAR: (G) GROUP: P-1+Q-1 (1T) LOT NO: (9D) D/C: 0144 LSY T676 Bin1: P-1-20 Bin2: Q-1-20 Bin3: ML Temp ST 2 2a 220 C R 240 C R C RT Additional TEXT R077 PACKVAR: (G) GROUP: P-1+Q-1 Draft Version 0.0 Transportation Packing and Materials Kartonverpackung und Materialien Barcode label Barcode label CAUTION LEVEL This bag contains MOISTURE SENSITIVE OPTO SEMICONDUCTORS 1. Shelf life in sealed bag: 24 months at < 40 C and < 90% relative humidity (RH). 2. After this bag is opened, devices that will be subjected to infrared reflow, vapor-phase reflow, or equivalent processing (peak package body temp. If blank, see bar code label a) Mounted within at factory conditions of 30 C/60% RH. Floor time see below b) Stored at 3. Devices require baking, before mounting, if: a) Humidity Indicator Card is > 10% when read at 23 C ± 5 C, or b) 2a or 2b is not met. 4. If baking is required, reference IPC/JEDEC J-STD-033 for bake procedure. Bag seal date (if blank, seal date is identical with date code). Date and time opened: Moisture Level 1 Floor time > 1 Year Moisture Level 4 Floor time 72 Hours Moisture Level 2 Floor time 1 Year Moisture Level 5 Floor time 48 Hours Moisture Level 2a Floor time 4 Weeks Moisture Level 5a Floor time 24 Hours Moisture Level 3 Floor time 168 Hours Moisture Level 6 Floor time 6 Hours OSRAM Opto Semiconductors (6P) BATCH NO: GH1234 Muster (X) PROD NO: (Q)QTY: 2000 Multi TOPLED R18 DEMY OSRAM Opto Semiconductors (6P) BATCH NO: GH1234 Muster (X) PROD NO: (Q)QTY: 2000 Multi TOPLED R18 DEMY OSRAM Packing Sealing label OHA02044 Dimensions of transportation box in mm (inch) Width / Breite Length / Länge Height / Höhe 195 ± 5 (7.677 ± ) 195 ± 5 (7.677 ± ) 30 ± 5 (1.181 ± 0.196) Notes The evaluation of eye safety occurs according to the standard IEC 62471:2008 ("photobiological safety of lamps and lamp systems"). Within the risk grouping system of this CIE standard, the LED specified in this data sheet fall into the class - TBD -. Under real circumstances (for exposure time, eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices. As a matter of principle, however, it should be mentioned that intense light sources have a high secondary exposure potential due to their blinding effect. As is also true when viewing other bright light sources (e.g. headlights), temporary reduction in visual acuity and afterimages can occur, leading to irritation, annoyance, visual impairment, and even accidents, depending on the situation. Hinweise Die Bewertung der Augensicherheit erfolgt nach dem Standard IEC 62471:2008 ("photobiological safety of lamps and lamp systems"). Im Risikogruppensystem dieser CIE- Norm erfüllen die in diesem Datenblatt angegebenen LEDs folgende Gruppenanforderung - - TBD -. Unter realen Umständen (für Expositionsdauer, Augenpupille, Betrachtungsabstand) geht damit von diesen Bauelementen keinerlei Augengefährdung aus. Grundsätzlich sollte jedoch erwähnt werden, dass intensive Lichtquellen durch ihre Blendwirkung ein hohes sekundäres Gefahrenpotenzial besitzen. Nach einem Blick in eine helle Lichtquelle (z.b. Autoscheinwerfer), kann ein temporär eingeschränktes Sehvermögen oder auch Nachbilder zu Irritationen, Belästigungen, Beeinträchtigungen oder sogar Unfällen führen
19 Disclaimer OSRAM OS assumes no liability whatsoever for any use of this document or its content by recipient including, but not limited to, for any design in activities based on this preliminary draft version. OSRAM OS may e.g. decide at its sole discretion to stop developing and/or finalising the underlying design at any time. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components* may only be used in life-support devices** or systems with the express written approval of OSRAM OS. *) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. **) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered. Disclaimer OSRAM OS übernimmt keine wie auch immer geartete Haftung für die Nutzung dieses Dokuments und seines Inhaltes durch den Empfänger, insbesondere nicht für irgendwelche Design-Aktivitäten, die auf dieser vorläufigen Entwurfsversion basieren. OSRAM OS behält sich beispielsweise auch vor, jederzeit die Weiter- und Fertigentwicklung des zugrundeliegenden Designs einseitig einzustellen. Bitte beachten! Lieferbedingungen und Änderungen im Design vorbehalten. Aufgrund technischer Anforderungen können die Bauteile Gefahrstoffe enthalten. Für weitere Informationen zu gewünschten Bauteilen, wenden Sie sich bitte an unseren Vertrieb. Falls Sie dieses Datenblatt ausgedruckt oder heruntergeladen haben, finden Sie die aktuellste Version im Internet. Verpackung Benutzen Sie bitte die Ihnen bekannten Recyclingwege. Wenn diese nicht bekannt sein sollten, wenden Sie sich bitte an das nächstgelegene Vertriebsbüro. Wir nehmen das Verpackungsmaterial zurück, falls dies vereinbart wurde und das Material sortiert ist. Sie tragen die Transportkosten. Für Verpackungsmaterial, das unsortiert an uns zurückgeschickt wird oder das wir nicht annehmen müssen, stellen wir Ihnen die anfallenden Kosten in Rechnung. Bauteile, die in lebenserhaltenden Apparaten und Systemen eingesetzt werden, müssen für diese Zwecke ausdrücklich zugelassen sein! Kritische Bauteile* dürfen in lebenserhaltenden Apparaten und Systemen** nur dann eingesetzt werden, wenn ein schriftliches Einverständnis von OSRAM OS vorliegt. *) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems führen wird oder die Sicherheit oder Effektivität dieses Apparates oder Systems beeinträchtigt. **) Lebenserhaltende Apparate oder Systeme sind für (a) die Implantierung in den menschlichen Körper oder (b) für die Lebenserhaltung bestimmt. Falls Sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist
20 Glossary 1) Brightness: Brightness values are measured during a current pulse of typically 25 ms, with an internal reproducibility of +/- 8 % and an expanded uncertainty of +/- 11 % (acc. to GUM with a coverage factor of k = 3). 2) 3) 4) 5) Reverse Operation: A minimum of 10 hours of reverse operation is permisable in total. Wavelength: The wavelength is measured at a current pulse of typically 25 ms, with an internal reproducibility of ± 0,5 nm and an expanded uncertainty of ± 1 nm (acc. to GUM with a coverage factor of k=3). Forward Voltage: The forward voltage is measured during a current pulse of typically 8 ms, with an internal reproducibility of +/- 0,05 V and an expanded uncertainty of +/- 0,1 V (acc. to GUM with a coverage factor of k=3). Thermal Resistance: Rth max is based on statistic values (6σ) 6) Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 7) Relative Brightness Curve: In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit. 8) Tolerance of Measure: Dimensions are specified as follows: mm (inch). Glossar 1) Helligkeit: Helligkeitswerte werden während eines Strompulses einer typischen Dauer von 25 ms, mit einer internen Reproduzierbarkeit von +/- 8 % und einer erweiterten Messunsicherheit von +/- 11 % gemessen (gemäß GUM mit Erweiterungsfaktor k = 3). 2) Betrieb in Sperrrichtung: Eine Gesamtbetriebszeit von wenigstens 10 Stunden in Sperrrichtung ist gewährleistet. 3) Wellenlänge: Die Wellenläge wird während eines Strompulses einer typischen Dauer von 25 ms, mit einer internen Reproduzierbarkeit von ± 0,5 nm und einer erweiterten Messunsicherheit von ± 1 nm gemessen (gemäß GUM mit Erweiterungsfaktor k=3). 4) Durchlassspannung: Vorwärtsspannungen werden während eines Strompulses einer typischen Dauer von 8 ms, mit einer internen Reproduzierbarkeit von +/- 0,05 V und einer erweiterten Messunsicherheit von +/- 0,1 V gemessen (gemäß GUM mit Erweiterungsfaktor k=3). 5) Wärmewiderstand: Rth max basiert auf statistischen Werten (6σ) 6) Typische Werte: Wegen der besonderen Prozessbedingungen bei der Herstellung von LED können typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes überein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden können. Falls erforderlich, z.b. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankündigung geändert. 7) Relative Helligkeitskurve: Im gestrichelten Bereich der Kennlinien muss mit erhöhten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden. 8) Maßtoleranz: Maße werden wie folgt angegeben: mm (inch)
21 Published by OSRAM Opto Semiconductors GmbH Leibnizstraße 4, D Regensburg All Rights Reserved
Silicon NPN Phototransistor with V λ Characteristics NPN-Silizium-Fototransistor mit V λ Charakteristik Version 1.1 SFH 3711
214-8-1 Silicon NPN Phototransistor with V λ Characteristics NPN-Silizium-Fototransistor mit V λ Charakteristik Version 1.1 SFH 3711 Features: Besondere Merkmale: Spectral range of sensitivity: (typ) 47...
Multi-Chip-Gehäuse mit 3 Emittern und einem Detektor Small package: (WxDxH) 4.7 mm x 2.5 mm x 0.9 mm
! 2007-05-23 BioMon Sensor Version alpha.3 BioMon Draft - This design is for Reference only. Features: Besondere Merkmale: Multi chip package featuring 3 emitters and one detector Multi-Chip-Gehäuse mit
Silicon NPN Phototransistor NPN-Silizium-Fototransistor Version 1.1 SFH 3204
214-1-14 Silicon NPN Phototransistor NPN-Silizium-Fototransistor Version 1.1 SFH 324 Features: Besondere Merkmale: Spectral range of sensitivity: (typ) 45... 112 nm Spektraler Bereich der Fotoempfindlichkeit:
DURIS P 5 Datasheet Version 1.1 GB DASPA1.13. High-efficacy mid-power LED with long lifetimes also at high currents and high junction temperatures.
2015-02-12 DURIS P 5 Datasheet Version 1.1 High-efficacy mid-power LED with long lifetimes also at high currents and high junction temperatures. Hocheffiziente LED mittlerer Leistungsklasse mit langer
DURIS P 5 Datasheet Version 1.1 GD DASPA1.14. High-efficacy mid-power LED with long lifetimes also at high currents and high junction temperatures.
2014-12-18 DURIS P 5 Datasheet Version 1.1 High-efficacy mid-power LED with long lifetimes also at high currents and high junction temperatures. Hocheffiziente LED mittlerer Leistungsklasse mit langer
OSLON SSL 150 Datasheet Version 1.2 LT CPDP
2013-06-15 OSLON SSL 150 Datasheet Version 1.2 This ultra-compact 1 W class LED provides a wide radiation pattern allowing perfect interaction and various designs including color mixing LED clusters. Its
OSLON SSL Ceramic package - 80 radiation pattern Lead (Pb) Free Product - RoHS Compliant LY CP7P. Released
OSLON SSL Ceramic package - 8 radiation pattern Lead (Pb) Free Product - RoHS Compliant LY CP7P Released Besondere Merkmale Gehäusetyp: SMT-Keramikgehäuse mit Silikonverguss und Linse Typischer Lichtstrom:
Advanced Power TOPLED Datasheet Version 1.0 LA G6SP
213-9-24 Advanced Power TOPLED Datasheet Version 1. Advanced Power TOPLED features a compact package with a wide brightness range and high luminous efficiency. Advanced Power TOPLED verfügt über eine platzsparende
OSLON SSL Lead (Pb) Free Product - RoHS Compliant LD CP7P, LT CP7P. Vorläufige Daten / Preliminary Data
OSLON SSL Lead (Pb) Free Product - RoHS Compliant Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: SMD Keramik Gehäuse mit Silikonverguss und Linse Typischer Lichtfluss: 515 mw (tief
OSLON LX Datasheet Version 1.2 LUW CNAP
213-6-11 OSLON LX Datasheet Version 1.2 The OSLON LX combines high light output with the outstanding robustness of a ceramic package. The radiation of the integrated lens makes it possible to use this
OSLON SSL Ceramic package Lead (Pb) Free Product - RoHS Compliant LCW CP7P. Vorläufige Daten / Preliminary Data
OSLON SSL Ceramic package Lead (Pb) Free Product - RoHS Compliant Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: SMD Keramik Gehäuse mit Silikonverguss und Linse Typischer Lichtstrom:
OSRAM OSTAR - Lighting IR 6-fold with Optics (850nm) - 140 Version 1.1 SFH 4750
21-4-21 OSRAM OSTAR - Lighting IR 6-fold with Optics (8nm) - 14 Version 1.1 SFH 47 Features: Besondere Merkmale: 3. W optical power at IF=1A 3. W optische Leistung bei IF=1A Active chip area 2.1 x 3.2
OSLON SSL 80 Datasheet Version 1.1 LD CQ7P
2013-08-15 OSLON SSL 80 Datasheet Version 1.1 This ultra-compact 1 W class LED offers a prefocused radiation pattern making it the ideal choice for spot lighting applications. Its low thermal resistance
Korrosionsstabilität: Höchste Korrosionsbeständigkeit Lumen Maintenance: Test results according to IESNA LM-80 available
2013-06-15 OSLON SSL 80 Datasheet Version 1.2 This ultra-compact 1 W class LED offers a prefocused radiation pattern making it the ideal choice for spot lighting applications. Its low thermal resistance
ESD - Festigkeit: 8 kv nach JESD22-A114-F JESD22-A114-F Corrosion Robustness: Improved corrosion robustness
OSLON SSL 80 Datasheet Version 1.0 Small size high flux LED for slim designs (between 0 ma and 00 ma constant current). 355 mw, 48% efficacy at 350 ma. Kompakte Lichtquelle für platzsparende Designs (für
DISPLIX Oval Datasheet Version 1.0 KT HAVPA1.12
2014-11-26 DISPLIX Oval Datasheet Version 1.0 This device is especially designed for full color video walls.the black package guarantees highest contrast. Features: Package: SMD epoxy package with silicone
CHIPLED Lead (Pb) Free Product - RoHS Compliant LH N974
CHIPLED Lead (Pb) Free Product - RoHS Compliant LH N974 Besondere Merkmale Gehäusetyp: 1206, farbloser diffuser Verguss Besonderheit des Bauteils: extrem kleine Bauform 3,2 mm x 1,6 mm x 1,1 mm Wellenlänge:
OSRAM OSTAR Stage Datasheet. Version 1.3 LE CWUW S2W. Compact lightsource in SMT technology, glass window on top, RoHS compliant
OSRAM OSTAR Stage Datasheet Version 1.3 LE CWUW S2W Compact lightsource in SMT technology, glass window on top, RoHS compliant Features Package: compact lightsource in SMT technology with glass window
OSLON SSL Ceramic package - 80 radiation pattern Lead (Pb) Free Product - RoHS Compliant LCW CQ7P.CC. Released
OSLON SSL Ceramic package - 8 radiation pattern Lead (Pb) Free Product - RoHS Compliant Released Besondere Merkmale Gehäusetyp: SMT-Keramikgehäuse mit Silikonverguss und Linse Typischer Lichtstrom: 74
Korrosionsstabilität: Höchste Korrosionsbeständigkeit Lumen Maintenance: Test results according to IESNA LM-80 available
2013-02-15 OSLON SSL 80 Datasheet Version 1.0 Highest flux. Highest efficacy. This OSLON SSL family next generation LED offers a prefocused radiation pattern making it the ideal choice for spot lighting
Korrosionsstabilität: Höchste Korrosionsbeständigkeit Lumen Maintenance: Test results according to IESNA LM-80 available
2013-09-30 OSLON SSL 80 Datasheet Version 1.2 This ultra-compact 1 W class LED offers a prefocused radiation pattern making it the ideal choice for spot lighting applications. Its low thermal resistance
Infrared Emitter (940 nm) IR-Lumineszenzdiode (940 nm) Version 1.0 SFH 4846. verbunden
215-1-29 Infrared Emitter (94 nm) IR-Lumineszenzdiode (94 nm) Version 1. SFH 4846 Features: Wavelength 95nm Anode is electrically connected to the case Short switching times Spectral match with silicon
OSRAM OSTAR - Lighting plus LE UW S2LN. Vorläufige Daten / preliminary data. acc OS-PD-2011-019
OSRAM OSTAR - Lighting plus LE UW S2LN Vorläufige Daten / preliminary data acc OS-PD-2011-019 Besondere Merkmale Gehäusetyp: Kompakte Lichtquelle in Multi-Chip SMT Technologie mit Silikonlinse Besonderheit
CHIPLED 0603 Datasheet Version 1.0 LG Q971. Package: SMT package 0603, colorless diffused resin, 1.6 mm x 0.8 mm x 0.8 mm
2012-11-06 CHIPLED 0603 Datasheet Version 1.0 Features: Besondere Merkmale: Package: SMT package 0603, colorless diffused resin, 1.6 mm x 0.8 mm x 0.8 mm Gehäusetyp: SMT Gehäuse 0603, farbloser diffuser
OSLON Black Series Lead (Pb) Free Product - RoHS Compliant LD H9GP, LB H9GP, LT H9GP. Vorläufige Daten / Preliminary Data
OSLON Black Series Lead (Pb) Free Product - RoHS Compliant Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: SMD Epoxyd Gehäuse mit Silikonlinse Typischer Lichtfluss: 48 mw (tief blau);
OSLON SQUARE Data Sheet Version 1.0 LUW CQAR (EQW) Features. Merkmale. Applications
OSLON SQUARE Data Sheet Version 1.0 Small size high-flux LED for slim designs (between 200 ma and 1.5 A constant current). 278 lm and 126 lm/w at 700 ma; 152 lm and 146 lm/w at 350 ma. Kompakte Lichtquelle
GaAs Infrared Emitter Arrays GaAs-IR-Lumineszenzdioden-Zeilen Version 1.1 LD 260, LD 262, LD 263, LD 264, LD 265, LD 266, LD 267, LD 268, LD 269
215-6-24 GaAs Infrared Emitter Arrays GaAs-IR-Lumineszenzdioden-Zeilen Version 1.1 LD 26, LD 262, LD 263, LD 264, LD 265, LD 266, LD 267, LD 268, LD 269 Features: Besondere Merkmale: GaAs infrared emitting
Hoher Koppelfaktor in Lichtschranken in Verbindung mit SFH 3100 F High reliability Hohe Zuverlässigkeit
27-4-3 GaAs Infrared Emitter (Mini Sidelooker) GaAs-IR-Lumineszenzdiode (Mini Sidelooker) Version 1. SFH 41 Features: Besondere Merkmale: Peak wavelength of 95 nm Wellenlänge der Strahlung 95 nm Narrow
GaAs-IR-Lumineszenzdiode GaAs Infrared Emitter Lead (Pb) Free Product - RoHS Compliant LD 274
GaAs-IR-Lumineszenzdiode GaAs Infrared Emitter Lead (Pb) Free Product - RoHS Compliant LD 274 Wesentliche Merkmale GaAs-LED mit sehr hohem Wirkungsgrad Hohe Zuverlässigkeit Gute spektrale Anpassung an
Mini TOPLED Datasheet Version 2.3. LCB M67S CoD blue Cx=0.19 / Cy=0.19
2015-08-20 Mini TOPLED Datasheet Version 2.3 LCB M67S CoD blue Cx=0.19 / Cy=0.19 Features: Package: white SMT package, colored diffused resin Technology: InGaN Viewing angle at 50 % I V : 120 (Lambertian
OSLON Square Datasheet Version 1.0. LUW CQAR (streetwhite) Package: SMT ceramic package with silicone resin with lens
2012-02-16 OSLON Square Datasheet Version 1.0 Small size high-flux LED for slim designs (between 200 ma and 1.5 A constant current). 264 lm, 120 lm/w at 700 ma. Kompakte Lichtquelle für platzsparende Designs
Korrosionsstabilität: Höchste Korrosionsbeständigkeit Lumen Maintenance: Test results according to IESNA LM-80 available
2013-06-15 OSLON Square Datasheet Version 1.2 This most compact high-power LED (2 W class) allows dense clustering and simple circuit designs. Its extremely low thermal resistance helps to keep the efficiency
Korrosionsstabilität: Höchste Korrosionsbeständigkeit Lumen Maintenance: Test results according to IESNA LM-80 available
2013-02-15 OSLON SSL 150 Datasheet Version 1.0 This ultra-compact 1 W class LED provides a wide radiation pattern allowing perfect interaction and various designs including color mixing LED clusters. Its
OSLON SSL Ceramic package - 80 radiation pattern Lead (Pb) Free Product - RoHS Compliant LUW CP7P
OSLON SSL Ceramic package - 8 radiation pattern Lead (Pb) Free Product - RoHS Compliant LUW CP7P Abkündigung nach OS-PD-211-14 Besondere Merkmale Gehäusetyp: SMD Keramik Gehäuse mit Silikonverguss und
Korrosionsstabilität: Höchste Korrosionsbeständigkeit Lumen Maintenance: Test results according to IESNA LM-80 available
2014-01-10 OSLON SSL 80 Datasheet Version 2.0 Highest flux. Highest efficacy. This OSLON SSL family next generation LED offers a prefocused radiation pattern making it the ideal choice for spot lighting
Silicon NPN Phototransistor NPN-Silizium-Fototransistor Version 1.2 BPX 81. Spectral range of sensitivity: (typ) 450... 1100
2015-06-24 Silicon NPN Phototransistor NPN-Silizium-Fototransistor Version 1.2 BPX 81 Features: Spectral range of sensitivity: (typ) 450... 1100 nm Besondere Merkmale: Spektraler Bereich der Fotoempfindlichkeit:
SOLERIQ S 19 Datasheet Version 1.1 GW KAHNB1.CM
2015-01-21 SOLERIQ S 19 Datasheet Version 1.1 The SOLERIQ S products were specifically designed for applications requiring large flux packages out of a compact area. Die SOLERIQ S Produkte wurden speziell
IR-Lumineszenzdiode (850 nm) mit hoher Ausgangsleistung High Power Infrared Emitter (850 nm) Lead (Pb) Free Product - RoHS Compliant SFH 4232
IR-Lumineszenzdiode (85 nm) mit hoher Ausgangsleistung High Power Infrared Emitter (85 nm) Lead (Pb) Free Product - RoHS Compliant SFH 4232 Wesentliche Merkmale IR-Lichtquelle mit hohem Wirkungsgrad Niedriger
Display with controlling function Anzeige mit Funktionskontrolle
212-8-17 Multi TOPLED with LED and Phototransistor-Detector Multi TOPLED mit LED und Fototransistor-Detektor Version 1. SFH 722 Features: Besondere Merkmale: Display function can be controlled by built-in
ESD sicher bis 2 kv nach ANSI/ESDA/JEDEC JS-001-2011 Superior Corrosion Robustness (see chapter package outlines)
214-1-8 High Power Infrared Emitter (85 nm) IR-Lumineszenzdiode (85 nm) mit hoher Ausgangsleistung Version 1.2 SFH 4235 Features: Besondere Merkmale: IR lightsource with high efficiency IR Lichtquelle
DISPLIX Oval Datasheet Version 1.0 KY HAVPA1.22
2015-01-29 DISPLIX Oval Datasheet Version 1.0 This device is especially designed for 3D RGBY video walls and general electronic variable message signs. the black package guarantees highest contrast. Das
Farbe: neutralweiß; CTR = 4000 K - 5700 K; CRI (min.) = 70*; CRI (typ.) = 72 ESD - withstand voltage: 8 kv acc. to
2012-09-17 OSLON SSL 150 Datasheet Version 1.1 Small size high flux LED for slim designs (between 100 ma and 800 ma constant current). 136 lm (typ.), 126 lm/w (typ.) at 350 ma (5000 K). Kompakte Lichtquelle
OSLON Square Data Sheet Version 1.0 LCW CQAR.EC. Features. Merkmale
OSLON Square Data Sheet Version 1.0 Small size high-flux LED for slim designs (between 200 ma and 1.5 A constant current). 200 lm, 91 lm/w at 700 ma; 113 lm, 108 lm/w at 350 ma (3000 K). Kompakte Lichtquelle
OSLON SSL 80 Datasheet Version 1.1 GW CS8PM1.PM
2015-09-28 OSLON SSL 80 Datasheet Version 1.1 Higher performance. Lower thermal resistance. Extended range of driving conditions. This OSLON SSL family new generation LED offers a prefocused radiation
SOLERIQ S 19 Datasheet Version 1. 3 GW KAHLB2.DM
2016-01-07 SOLERIQ S 19 Datasheet Version 1. 3 The SOLERIQ S products were specifically designed for applications requiring large flux packages out of a compact area. This Brilliant Color version is designed
IR-Lumineszenzdiode (850 nm) mit hoher Ausgangsleistung High Power Infrared Emitter (850 nm) Lead (Pb) Free Product - RoHS Compliant SFH 4235
IR-Lumineszenzdiode (8 nm) mit hoher Ausgangsleistung High Power Infrared Emitter (8 nm) Lead (Pb) Free Product - RoHS Compliant SFH 423 Vorläufige Daten / Preliminary Data Wesentliche Merkmale IR-Lichtquelle
Grüne Laser Diode 120 mw in TO56 Bauform Green Laser Diode 120 mw in TO56 Package PLP 520 PRELIMINARY
Grüne Laser Diode 120 mw in TO56 Bauform Green Laser Diode 120 mw in TO56 Package PLP 520 PRELIMINARY Besondere Merkmale Optische Ausgangsleistung (Dauerstrich- Betrieb): 90/120mW (T Case = 25 C) Typ.
BLUE LINE TM Hyper 3 mm (T1) LED, Non Diffused Hyper-Bright LED LB 3336
BLUE LINE TM Hyper 3 mm (T1) LED, Non Diffused Hyper-Bright LED LB 3336 Abgekündigt nach OS-PD-25-2 - wird durch LB 3333 ersetzt werden Obsolete acc. to OS-PD-25-2 - will be replaced by LB 3333 Besondere
Blaue Laser Diode 1.4 W in TO56 Bauform Blue Laser Diode 1.4 W in TO56 Package PL TB450 PRELIMINARY
Blaue Laser Diode 1.4 W in TO56 Bauform Blue Laser Diode 1.4 W in TO56 Package PL TB450 PRELIMINARY Besondere Merkmale Typ. Emissionswellenlänge 450nm Effiziente Strahlungsquelle für Dauerstrich- und gepulsten
ESD sicher bis 2 kv nach ANSI/ESDA/JEDEC JS-001- HBM, Klasse 2 Narrow half angle (+/- 12 ) Enger Abstrahlwinkel (+/- 12 )
2014-03-10 Narrow beam LED in Dragon Dome package (850nm) Engwinklige LED im Dragon Dome Gehäuse (850 nm) Version 1.3 SFH 4783 Features: Besondere Merkmale: IR lightsource with high efficiency IR-Lichtquelle
Silicon Differential Photodiode Silizium-Differential-Fotodiode Version 1.2 BPX 48
215-9-4 Silicon Differential Photodiode Silizium-Differential-Fotodiode Version 1.2 BPX 48 Features: Especially suitable for applications from 4 nm to 11 nm High photosensitivity DIL plastic package with
InGaAlP-High Brightness-Lumineszenzdiode (632 nm, High Optical Power) InGaAlP High Brightness Light Emitting Diode (632 nm, High Optical Power)
InGaAlP-High Brightness-Lumineszenzdiode (632 nm, High Optical Power) InGaAlP High Brightness Light Emitting Diode (632 nm, High Optical Power) F 1998A Vorläufige Daten/Preliminary Data Wesentliche Merkmale
OSLON Black Series (940 nm) Lead (Pb) Free Product - RoHS Compliant SFH 4725S
OSLON Black Series (94 nm) Lead (Pb) Free Product - RoHS Compliant SFH 4725S DRAFT - This design is for Reference only. Subject to change without notice. Wesentliche Merkmale IR-Lichtquelle mit hohem Wirkungsgrad
High Accuracy Ambient Light Sensor Hochgenauer Umgebungslichtsensor Version 1.5 SFH 5711
2015--20 High Accuracy Ambient Light Sensor Hochgenauer Umgebungslichtsensor Version 1.5 SFH 5711 Features: Besondere Merkmale: Opto hybrid with logarithmic current output Optohybrid mit logarithmischem
OSRAM OSTAR Projection Power Datasheet Version 2.8 - OS-PCN-2015-011-A LE A P2W
2015-10-26 OSRAM OSTAR Projection Power Datasheet Version 2.8 - OS-PCN-2015-011-A OSRAM OSTAR Projection Power is a high luminance LED for projection applications. Die OSRAM OSTAR Projection Power ist
GaAlAs Infrared Emitter (880 nm) GaAlAs-IR-Lumineszensdiode (880 nm) Version 1.0 SFH 487
29-9-3 GaAlAs Infrared Emitter (88 nm) GaAlAs-IR-Lumineszensdiode (88 nm) Version 1. SFH 487 Features: Besondere Merkmale: Very highly efficient GaAlAs-LED GaAlAs-LED mit sehr hohem Wirkungsgrad High reliability
Blaue Laser Diode in TO38 ICut Bauform Blue Laser Diode in TO38 ICut Package PL 450B PRELIMINARY
Blaue Laser Diode in TO38 ICut Bauform Blue Laser Diode in TO38 ICut Package PL 450B PRELIMINARY Besondere Merkmale Typ. Emissionswellenlänge 450nm Effiziente Strahlungsquelle für Dauerstrich- und gepulsten
BLUE LINE TM Hyper TOPLED Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LB T676
BLUE LINE TM Hyper TOPLED Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LB T676 Abkündigung nach OS-PD-28-14 Obsolete acc. to OS-PD-28-14 Besondere Merkmale Gehäusetyp: weißes P-LCC-2 Gehäuse,
Hyper SIDELED Hyper-Bright Low Current LED Lead (Pb) Free Product - RoHS Compliant LG A67K, LP A67K. Released
Hyper SIDELED Hyper-Bright Low Current LED Lead (Pb) Free Product - RoHS Compliant LG A67K, LP A67K Released Besondere Merkmale Gehäusetyp: weißes SMT Gehäuse, farbloser klarer Verguss Besonderheit des
Grüne Laser Diode im TO56 Gehäuse Green Laser Diode in TO56 Package PLT5 520 TARGET DATASHEET
Grüne Laser Diode im TO56 Gehäuse Green Laser Diode in TO56 Package PLT5 520 TARGET DATASHEET Besondere Merkmale Optische Ausgangsleistung (Dauerstrich- Betrieb): 50 &30 mw (T Case = 25 C) Typ. Emissionswellenlänge:
Green Laser Diode in TO56 Package Grüne Laser Diode in TO56 Gehäuse Version 0.1 PLT5 510
o2007-05- Green Laser Diode in TO56 Package Grüne Laser Diode in TO56 Gehäuse Version 0.1 PLT5 510 Features Besondere Merkmale Optical output power (continuous wave): 10 mw (T case = 25 C) Optische Ausgangsleistung
OSRAM OSTAR Projection Power Datasheet Version 1.2 LE B P3W. OSRAM OSTAR Projection Power is a high flux LED for slim designs.
2013-06-18 OSRAM OSTAR Projection Power Datasheet Version 1.2 OSRAM OSTAR Projection Power is a high flux LED for slim designs. Die OSRAM OSTAR Projection Power ist eine hoch effiziente Lichtquelle für
Power TOPLED With Lens Enhanced Thin Film LED Lead (Pb) Free Product - RoHS Compliant LS E65F, LA E65F, LY E65F. Vorläufige Daten / Preliminary Data
Power TOPLED With Lens Enhanced Thin Film LED Lead (Pb) Free Product - RoHS Compliant LS E65F, L E65F, LY E65F Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: weißes P-LCC-4 Gehäuse,
Grüne Laser Diode in TO38 ICut Bauform Green Laser Diode in TO38 ICut Package PL 515 PRELIMINARY
Grüne Laser Diode in TO38 ICut Bauform Green Laser Diode in TO38 ICut Package PL 515 PRELIMINARY Besondere Merkmale Optische Ausgangsleistung (Dauerstrich- Betrieb): 30mW (T Case = 25 C) Typ. Emissionswellenlänge:
SIDELED LS A670, LO A670, LY A670, LG A670, LP A670
SIDELED LS A670, LO A670, LY A670, LG A670, LP A670 Non-RoHS compliant version of product will be discontinued acc. to OS-PD-2005-005. The product itself will remain within RoHS compliant version. Besondere
Platinum DRAGON Enhanced thin film LED Lead (Pb) Free Product - RoHS Compliant LR W5SN, LA W5SN, LY W5SN. Vorläufige Daten / Preliminary Data
Platinum DRAGON Enhanced thin film LED Lead (Pb) Free Product - RoHS Compliant Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: weißes SMD-Gehäuse, farbloser klarer Silikon - Verguss
EMI Suppression Capacitors X2 / 275 and 300 Vac B3292 B32922 X2 MKP/SH 40/100/21/C
EMI Suppression Capacitors X2 / 275 and 300 Vac B3292 X2 capacitors with very small dimensions Rated ac voltage 275 and 300 V, 50/60 Hz Construction Dielectric: polypropylene (MKP) Plastic case (UL 94
Mounting-hole Ø6+0.2 mm. Connection pins. Farbe / colour. gelb / yellow. λ DOM / nm 628 588 570 470 x = 0,25-0,37 y = 0,205-0,375 2φ / 70 70 70 50 50
Metallleuchte SMZS 06 Innenreflektor Metal Indicator SMZS 06 Inside Reflector Spezifikation -Leuchte für Schraubbefestigung M6x0,5 mm. Lieferung incl. Unterlegring und Befestigungsmutter (montiert). Specification
SIMID 1210-100. Size 1210 (EIA) or 3225 (IEC) Rated inductance 0,0082 to 100 µh Rated current 65 to 800 ma
Size 12 (EIA) or 3225 (IEC) Rated inductance 0,0082 to 0 µh Rated current 65 to 800 ma Construction Ceramic or ferrite core Laser-welded winding Flame-retardant encapsulation Features Very wide temperature
SPL LL85 2009-03-04 1
29-3-4 Hybrid Pulsed Laser Diode with Integrated Driver Stage 14 W Peak Power Hybride Impuls-Laserdiode mit integrierter Treiberstufe 14 W Spitzenleistung Version 1. Features: Besondere Merkmale: Low cost,
SFH 900. Miniatur-Reflexlichtschranken Miniature Light Reflection Switches SFH 900
Miniatur-Reflexlichtschranken Miniature Light Reflection Switches SFH 900 feo06270 Maβe in mm, wenn nicht anders angegeben/dimensions in mm, unless otherwise specified. Wesentliche Merkmale Reflexlichtschranken
114-18867 09.Jan 2014 Rev C
Application Specification 114-18867 09.Jan 2014 Rev C High Speed Data, Pin Headers 90 / 180 4pos., shie lded High Speed Data, Stiftleiste 90 / 180, geschirmt Description Beschreibung 1. Packaging of pin
Effiziente Strahlungsquelle für Dauerstrich- und gepulsten Betriebsmodus Reliable InGa(Al)As strained quantum-well structure
2010-05-12 Laser Diode on Submount 2.0 W cw (C-Mount) Laser Diode in offener Bauform 2.0 W cw (C-Mount) Version 1.0 Features: Besondere Merkmale: Efficient radiation source for cw and pulsed operation
336 Wannenstiftleisten RM 1,27mm, gerade/gewinkelt Box Headers, 1.27mm Pitch, Straight/Right-Angled
Technische Daten / Technical Data Isolierkörper Thermoplastischer Kunststoff, nach UL94 V-0 Insulator Thermoplastic, rated UL94 V-0 Kontaktmaterial Messing Contact Material Brass Kontaktoberfläche Vergoldet
Verarbeitungsspezifikation Application Specification. Verarbeitungsspezifikation. Application Specification MA-59V093. für for. Winkelstecker für PCB
Verarbeitungsspezifikation MA-59V093 für for Winkelstecker für PCB Right angle plug for PCB 59S2AF-40MXX-Y 59S2LF-40MXX-Y 59S2RF-40MXX-Y 59S2UF-40MXX-Y 200 09-0100 U_Winkler 11.02.09 100 08-v323 U_Winkler
Taster gerade - Einlöt / SMT / Kappen Straight Tact Switches - Solder-in / SMT / Caps
Technische Daten /Technical Data Gehäuse/Abdeckung/Hebel Thermoplastischer Kunststoff, nach UL94 V-0 Rostfreier Stahl Thermoplastischer Kunststoff, nach UL94 V-0 Case/Cover/Actuator Thermoplastic, rated
B81133 X2 MKT/SH 40/100/21/C B81133 X2 MKT/SH 40/100/21/C. EMI Suppression Capacitors X2 / 275 Vac Not for new design
EMI Suppression Capacitors X2 / X2 capacitors with small dimensions Rated ac voltage 275 V, 50/60 Hz 1) Construction Dielectric: polyester (MKT) Internal series connection Plastic case (UL 94 V-0) Epoxy
Release Notes BRICKware 7.5.4. Copyright 23. March 2010 Funkwerk Enterprise Communications GmbH Version 1.0
Release Notes BRICKware 7.5.4 Copyright 23. March 2010 Funkwerk Enterprise Communications GmbH Version 1.0 Purpose This document describes new features, changes, and solved problems of BRICKware 7.5.4.
com.tom PORTAL Registrierung
com.tom PORTAL Registrierung Copyright 2000-2010 Beck IPC GmbH Page 1 of 6 TABLE OF CONTENTS 1 AUFGABE... 3 2 DEFINITIONEN... 3 3 PRODUKTE... 3 4 REGISTRIERUNG... 3 5 PROJEKT-REGISTRIERUNG... 4 5.1 PROJEKT...
Cable Tester NS-468. Safety instructions
Cable Tester NS-468 Safety instructions Do not use the cable tester NS-468 if it is damaged. This device is only for use inside dry and clean rooms. This device must be protected from moisture, splash
Datenblatt / Data sheet
Elektrische Kenndaten Eigenschaften / Electrical properties Höchstzulässige Werte / Maximum rated values Periodische Spitzensperrspannung repetitive peak reverse voltages Elektrische Eigenschaften Thermische
fastpim 1 H fast switching H bridge module Features: - 1 Phase Input Rectifier Bridge - 1 Phase fast switching IGBT + FRED full H bridge - NTC
fast switching H bridge module Features: - 1 Phase Input Rectifier Bridge - 1 Phase fast switching IGBT + FRED full H bridge - NTC Copyright by Vincotech 1 Revision: 1 module types / Produkttypen Part-Number
MindestanforderungenanDokumentationvon Lieferanten
andokumentationvon Lieferanten X.0010 3.02de_en/2014-11-07 Erstellt:J.Wesseloh/EN-M6 Standardvorgabe TK SY Standort Bremen Standard requirements TK SY Location Bremen 07.11.14 DieInformationenindieserUnterlagewurdenmitgrößterSorgfalterarbeitet.DennochkönnenFehlernichtimmervollständig
p^db=`oj===pìééçêíáåñçêã~íáçå=
p^db=`oj===pìééçêíáåñçêã~íáçå= Error: "Could not connect to the SQL Server Instance" or "Failed to open a connection to the database." When you attempt to launch ACT! by Sage or ACT by Sage Premium for
Lichtstrom / Luminous ux
HED LED 19W 4kK CRI80+ 12 Abmessungen / Dimensions: Spezifikation / Specification: Artikelnummer / Order number: 122023 Abstrahlwinkel / Beam angle: 12 Nennleistung / Nominal lamp wattage: 19 W Lampenspannung
RS232-Verbindung, RXU10 Herstellen einer RS232-Verbindung zwischen PC und Messgerät oder Modem und Messgerät
Betriebsanleitung RS232-Verbindung, RXU10 Herstellen einer RS232-Verbindung zwischen PC und Messgerät oder Modem und Messgerät ä 2 Operating Instructions RS232 Connection, RXU10 Setting up an RS232 connection
Advanced Availability Transfer Transfer absences from HR to PPM
Advanced Availability Transfer Transfer absences from HR to PPM A PLM Consulting Solution Public Advanced Availability Transfer With this solution you can include individual absences and attendances from
eurex rundschreiben 094/10
eurex rundschreiben 094/10 Datum: Frankfurt, 21. Mai 2010 Empfänger: Alle Handelsteilnehmer der Eurex Deutschland und Eurex Zürich sowie Vendoren Autorisiert von: Jürg Spillmann Weitere Informationen zur
PROTOTYPING 101 CMF // Spec-Sheet Guideline
PROTOTYPING 101 CMF // SpecSheet Guideline = CMF COLOUR MATERIAL FINISH = FARBEN MATERIALIEN OBERFLÄCHEN eine CMFDatei ( CMFSheet, SpecSheet) beschreibt alle für die Erstellung eines Prototypens und die
Reflexlichtschranke Reflective Optical Switch Lead (Pb) Free Product - RoHS Compliant SFH 7740
Reflexlichtschranke Reflective Optical Switch Lead (Pb) Free Product - RoHS Compliant SFH 7740 not for new design (replacement SFH 7741) Wesentliche Merkmale Arbeitsabstand: 0.5-4 mm Arbeitsbereich einstellbar
Bleifreie Bauteile bei Diotec Lead Free Products at Diotec
Bleifreie Bauteile bei Diotec Lead Free Products at Diotec 1 Bleifreie Bauteile Gesetzliche Grundlage Leadfree Devices Legislation 2 Ausnahmeregelungen in den Richtlinien, Bsp. 2002/95/EG - ROHS Exemptions
Symbio system requirements. Version 5.1
Symbio system requirements Version 5.1 From: January 2016 2016 Ploetz + Zeller GmbH Symbio system requirements 2 Content 1 Symbio Web... 3 1.1 Overview... 3 1.1.1 Single server installation... 3 1.1.2
KURZANLEITUNG. Firmware-Upgrade: Wie geht das eigentlich?
KURZANLEITUNG Firmware-Upgrade: Wie geht das eigentlich? Die Firmware ist eine Software, die auf der IP-Kamera installiert ist und alle Funktionen des Gerätes steuert. Nach dem Firmware-Update stehen Ihnen
p^db=`oj===pìééçêíáåñçêã~íáçå=
p^db=`oj===pìééçêíáåñçêã~íáçå= How to Disable User Account Control (UAC) in Windows Vista You are attempting to install or uninstall ACT! when Windows does not allow you access to needed files or folders.
Total Security Intelligence. Die nächste Generation von Log Management and SIEM. Markus Auer Sales Director Q1 Labs.
Total Security Intelligence Die nächste Generation von Log Management and SIEM Markus Auer Sales Director Q1 Labs IBM Deutschland 1 2012 IBM Corporation Gezielte Angriffe auf Unternehmen und Regierungen
Cloud for Customer Learning Resources. Customer
Cloud for Customer Learning Resources Customer Business Center Logon to Business Center for Cloud Solutions from SAP & choose Cloud for Customer https://www.sme.sap.com/irj/sme/ 2013 SAP AG or an SAP affiliate
HIR Method & Tools for Fit Gap analysis
HIR Method & Tools for Fit Gap analysis Based on a Powermax APML example 1 Base for all: The Processes HIR-Method for Template Checks, Fit Gap-Analysis, Change-, Quality- & Risk- Management etc. Main processes
Einsatz einer Dokumentenverwaltungslösung zur Optimierung der unternehmensübergreifenden Kommunikation
Einsatz einer Dokumentenverwaltungslösung zur Optimierung der unternehmensübergreifenden Kommunikation Eine Betrachtung im Kontext der Ausgliederung von Chrysler Daniel Rheinbay Abstract Betriebliche Informationssysteme
Aufgabenstellung Mit welchen SICLOCK Produkten kann ich einen PC Zeitsynchronisieren?
SICLOCK Application Note AN-0005 Titel Synchronisation von PCs mit SICLOCK Aufgabenstellung Mit welchen SICLOCK Produkten kann ich einen PC Zeitsynchronisieren? Schlüsselwörter SICLOCK DCFRS, WinGPS, GPS1000,
ISO 15504 Reference Model
Prozess Dimension von SPICE/ISO 15504 Process flow Remarks Role Documents, data, tools input, output Start Define purpose and scope Define process overview Define process details Define roles no Define