Publikationsverzeichnis (Stand: 16. April 2013) Buchbeiträge 2012 Rudolph, M.; Turan, C.; Kirchberg, S.; Ziegmann, G.; Peuker, U.A.: Nanoparticles in Organic Solvents With Polymers Stability and Consequences upon Material Synthesis Through Spray Drying and Melt Moulding, In: G. Tiddy, und R.B.H. Tan (Eds.) Nanoformulation, Royal Society of Chemistry: Cambridge, 2012. Begutachtete Publikationen 2013 Kirchberg, S.: Simulation and injection molding of ring-shaped polymer bonded nickel braze metal composite preforms based on rheological and thermal analyses. Open Journal of Composite Materials, Vol. 3 No. 2, 2013, pp. 24-29. doi: 10.4236/ojcm.2013.32004. Brinksmeier, E.; Riemer, O.; Kirchberg, S.; Brandao, C.: Injection molded spherical grinding tools: manufacture and application of a novel tool concept for micro grinding. Production Engineering Research and Development, 2013, doi: 10.1007/s11740-013-0468-0. 2012 Kirchberg, S.; Holländer, U.; Möhwald, K.; Ziegmann, G.; Bach, F.-W.: Processing and characterization of injection moldable polymer-particle composites applicable in brazing processes. Journal of Applied Polymer Science, 2012, doi: 10.1002/app.38862. Weidenfeller, B.; Anhalt, M.; Kirchberg, S.: Thermal diffusivity and mechanical properties of polymer matrix composites. Journal of Applied Physics, Vol. 112, 2012, 093513, doi: 10.1063/1.4764098. Kirchberg, S.; Anhalt, M.; Ziegmann, G.: Theoretical consideration of experimental data of thermal and magnetic properties of polymer-bonded soft magnetic composites. Journal of Thermoplastic Composite Materials, 2012, doi: 10.1177/0892705712454287. Kirchberg, S.; Rudolph, M.; Ziegmann, G.; Peuker, U.A.: Nanocomposites based on technical polymers and sterically functionalized soft magnetic nanoparticles synthesis, processing and characterization. Journal of Nanomaterials, Special Issue: Synthesis, Properties, and Applications of Polymeric Nanocomposites, 2012, doi:10.1155/2012/670531, Article ID 670531, 8 Seiten. Kirchberg, S.; Chen, L.; Xie, L.; Ziegmann, G.; Jiang, B.; Rickens, K.; Riemer, O.: Replication of precise polymeric microlens arrays combining ultra-precision diamond ball-end milling and micro injection molding. Microsystem Technologies, Vol. 18(4), 2012, S. 459-465. 2011 Jiang, B.; Chen, L.; Li, D.; Kirchberg, S.: Simulation research of the effect of the thermal reflow processing parameters on the profile of micro-spherical structure. Advanced Materials Research, Vols. 239-242, 2011, S. 517-523. Jiang, B.; Li, D.; Chen, L.; Kirchberg, S.: The simulation research of the effect of the processing parameters of thermal reflow on the height of micro-spherical structure. Journal of Zhengzhou University (Engineering Science), Vol. 32 (6), 2011, S. 6-10. Kirchberg, S.; Ziegmann, G.: Effect of spherical iron silicon (FeSi) microparticles on the viscosity behaviour of polypropylene melt. Applied Rheology 21 (3), 2011, S. 35495. 1/5 Publikationsverzeichnis
Kirchberg, S.; Abdin, Y.; Ziegmann, G.: Influence of particle shape and size on the wetting behavior of soft magnetic micropowders, Powder Technology, Vol. 207 (1-3), 2011, S. 311-317. 2010 Xie, L.; Kirchberg, S.; Steuernagel, L.; Ziegmann, G.: A mechanism influencing micro injection molded weld lines of hybrid nano filled polypropylene, Microsystem Technologies, Vol. 16 (11), 2010, S. 1855-1859. Song-bai, L.; Kirchberg, S.; Xie, L.; Jiang, B.Y.: Rheological experiment and numerical simulation of PP+FeSi composite materials, Journal of Polymer Material Science and Engineering, Vol. 26 (3), 2010, S. 164-167. 2009 Kirchberg, S.; Ziegmann, G.: Thermogravimetry and dynamic mechanical analysis of iron silicon particle filled polypropylene, Journal of Composite Materials, Vol. 43 (12), 2009, S. 1323-1334. Rudolph, M.; Peuker, U.A.; Kirchberg, S.; Ziegmann, G.; Turan, C.: Synthese hochgefüllter Polymer-Nanopartikel-Komposite, Chemie Ingenieur Technik, Vol. 81 (8), 2009, S. 1166-1167. Nicht begutachtete Publikationen 2012 Brunotte, G.-P.; Zivanovic, J.; Kirchberg, S.; Ziegmann, G.: Synthesis and Processing of Soft Magnetic Thermoplast Nano@Microparticle Compounds, Proceedings of 15th European Conference on Composite Materials, Venice, Italy (2012). 2010 Rudolph, M.; Kirchberg, S.; Turan, C.; Ziegmann, G.; Peuker, U.A.: Synthesis of highly filled nanomagnetite polymeric composites via sterically stabilized organosols and the spray drying process, Proceedings of World Congress of Particle Technology 6 (WCPT6), 2010, Nürnberg, paper 00057. 2009 Kirchberg, S.: Einfluss von Füllgrad und Geometrie weichmagnetischer Partikel auf die Verarbeitungs- und Materialeigenschaften ausgewählter Thermoplaste, Institut für Papierflieger, Clausthal-Zellerfeld, Dissertation, Band 2/04 (2009), ISBN 978-3- 86948-000-8. 2008 Kirchberg, S.; Ziegmann, G.: Oscillatory shear rheology of iron silicon filled polypropylene composites, Conference proceedings: 24 th Polymer Processing Society, Salerno, Italien, (2008), S. 121, ISBN 88-7897-024-7. Kirchberg, S.; Ziegmann, G.: Weichmagnetisch hochgefüllte Thermoplaste, Festschrift "10 Jahre PuK"-Symposium, Institut für Polymerwerkstoffe und Kunststofftechnik, Technische Universität Clausthal, Clausthal-Zellerfeld (2008), S.18-21. Kirchberg, S.; Ziegmann, G.: Hochgefüllte Polymere mit definierten Funktionen - Vom Werkstoff zum Hochleistungsbauteil, Technologie-Informationen Werkstoffe, Arbeitskreis der Technologietransferstellen niedersächsischer Hochschulen, Ausgabe 3 (2008), S. 7. 2005 Kleebauer, M.; Kirchberg, S.: Entwicklung eines Verfahrens zur kostengünstigen Herstellung von Hohlkörpern aus Papierwerkstoffen auf der Basis einer modifizierten Spritzgießtechnologie, PTS-PuK-Abschlussbericht zum Forschungsvorhaben AIF ZUTECH Z82 (2005). Kirchberg, S.; Ziegmann, G.; Reich S.: Analysis on the rheological behaviour of paper fibre suspensions within linear elastic deformation, Conference proceedings: 21 st Polymer Processing Society, Leipzig (2005), S. 99, ISBN 3-86101-784-4. 2/5 Publikationsverzeichnis
2004 Kirchberg, S.; Frormann, L.; Ziegmann, G.: Anwendung des Spritzgussprozesses auf den Werkstoff Papier zur Herstellung von Hohlkörperstrukturen, Institut für Jahresbericht (2004), S. 59-65. Vorträge Kleebauer, M.; Kirchberg, S.: Spritzgussteile aus Papier bald möglich? / Injection moulding technology for pulps is proceeding apace, PTSNews Magazin für die Papierindustrie, PTS München, Ausgabe 5 (2004), S. 50-51, ISSN 1434-7172. Kirchberg, S.; Ziegmann, G.: In einem Schuss Spritzgusstechnik für Papier, Technologien aus niedersächsischen Hochschulen, Niedersächsisches Ministerium für Wissenschaft und Kultur, Hannover (2004), S. 42-43. 2013 Kirchberg, S.: Testverfahren für thermische, mechanische und elektrische Größen. HT-PEM Workshop VDMA, ZBT Duisburg, Februar 2013. 2012 Kirchberg, S.; Xie, L.; Ziegmann, G.: Experimental investigation and simulation of rheological behavior of micro particle filled thermoplastic composites for injection molding processing. The XVIth International Congress on Rheology (ICR), Lissabon, Portugal (2012), Abstract no. 262. 2011 Kirchberg, S.; Anhalt, M.; Weidenfeller, B.: Correlation between thermal diffusivity and dynamic mechanical properties of soft magnetic particle filled thermoplastic composites. ASME/JSME 8 th Thermal Engineering Joint Conference, Honolulu Hawaii, USA (2011), Paper no. AJTEC2011-44054, 5 Seiten. Anhalt, M.; Kirchberg, S.; Weidenfeller, B.: Filler content- and temperature dependence of thermal diffusivity in polypropylene-iron silicon composites. ASME/JSME 8 th Thermal Engineering Joint Conference, Honolulu Hawaii, USA (2011), Paper no. AJTEC2011-44050, 7 Seiten. 2010 Rudolph, M.; Kirchberg, S.; Turan, C.; Ziegmann, G.; Peuker, U.A.: Processing and Characterization of Highly Filled Polymer Nanoparticle Composites for Micro Injection Molding Applications. Proceeding European Congress of Composite Materials14. Budapest, Ungarn, (2010), Paper ID: 546-ECCM14, 10 Seiten. Rudolph, M.; Kirchberg, S.; Turan, C.; Ziegmann, G.; Peuker, U.A.: Synthesis of Highly Filled Nanomagnetite Polymeric Composites via Stericallx Stabilized Organosols and the Spray Drying Process, World Congress on Particle Technology 6, Nürnberg (2010), Beitrag:H_H_1_0_00057, 4 Seiten. 2009 Kirchberg, S.: Spritzgussverarbeitung mit Mikro- und Nanopartikeln, Spring School Nanotechnology in Polymer Composites, Institut für Polymerwerkstoffe und Kunststofftechnik, Technische Universität Clausthal, Clausthal-Zellerfeld (2009). Ziegmann, G.; Kirchberg, S.: Rheologie an extrem gefüllten Polymeren, Würzburger Tage Thermische Analyse und Rheologie in der Automobilindustrie, Würzburg (2009). Ziegmann, G.; Kirchberg, S.: Der Unterboden im PKW, 5. CTI Fachkonferenz "Fahrzeugunterboden", Stuttgart (2009). 2008 Kirchberg, S.; Ziegmann, G.: Oscillatory shear rheology of iron silicon filled polypropylene composites, 24 th Polymer Processing Society (PPS-24), Salerno, Italien (2008). Kirchberg, S.; Ziegmann, G.: Verarbeitung und Charakterisierung partikelgefüllter Thermoplaste, "10 Jahre PuK"-Symposium, Institut für Polymerwerkstoffe und Kunststofftechnik, Technische Universität Clausthal, Clausthal-Zellerfeld (2008). 3/5 Publikationsverzeichnis
Kirchberg, S.: Spritzguss hochgefüllter Thermoplaste - Vom Rohmaterial zum charakterisierten Bauteil, PuK e.v. Stammtisch, Institut für Polymerwerkstoffe und Kunststofftechnik, Technische Universität Clausthal, Clausthal-Zellerfeld (2008). Kirchberg, S.; Ziegmann, G.: Wechselwirkungen zwischen Polymeren und Polymeren", Peine (2008). Kirchberg, S.; Ziegmann, G.: Verarbeitung mittels Spritzguss, SKZ-Seminar "Verarbeitung und Anwendung von hochgefüllten Polymeren", Peine (2008). Ziegmann, G.; Steuernagel, L.; Aranda, S.; Kirchberg, S.: Aufbereitung für Nanowerkstoffe Nutzen für strukturelle Anwendungen, VDI Tagung Aufbereitungstechnik, Köln (2008). 2007 Kirchberg, S.; Ziegmann, G.: Wechselwirkungen zwischen Polymeren und Polymeren", Peine (2007). Kirchberg, S.; Ziegmann, G.: Verarbeitung mittels Spritzguss, SKZ-Seminar "Verarbeitung und Anwendung von hochgefüllten Polymeren", Peine (2007). Ziegmann, G.; Kirchberg, S.; Bosse, M.: Extremely high-filled thermoplastic systems; A study of processing, Central South University, Changsha, China (2007). 2006 Kirchberg, S.; Ziegmann, G.: Wechselwirkungen zwischen Polymeren und Polymeren", Peine (2006). Ziegmann, G.; Kirchberg, S.: Der Unterboden im PKW, 3. CTI Fachkonferenz "Fahrzeugunterboden", Augsburg (2006). Kirchberg, S.; Ziegmann, G.: Innovative fiber injection molding complex paper structures in only one production step, PTS-Workshop Innovative Packaging, München (2006). 2005 Kirchberg, S.; Ziegmann, G.: Zur Rheologie der Polymere, SKZ-Seminar "Verarbeitung und Anwendung von hochgefüllten Polymeren", Peine (2005). Kirchberg, S.; Ziegmann, G.; Bosse, M.: Verarbeitungstechnologien für ultrahochgefüllte Compounds, Vortragsreihe: Wirtschaft trifft Technik, Institut für Clausthal-Zellerfeld (2005). Kirchberg, S.; Ziegmann, G.: A new field of solid-liquid separation by using permeable, pressure-tight filter media in a paper injection moulding process, FILTECH, Wiesbaden (2005). Frormann, L.; Ziegmann, G.; Kirchberg, S.; Reich, S.: Rheological analysis on paper fibre suspensions and their processing in the paper injection moulding process, naro.tech, Erfurt (2005). 2004 Kirchberg, S.; Ziegmann, G.; Frormann, L.; Bosse, M.; Niemeyer, S.: A new method for filtration by using porous laser sintered filters produced by rapid tooling, International symposium on fibers, fibrous structures and filtration, St. Louis, USA (2004). Kirchberg, S.; Frormann, L.; Peuker, U.A.: Development of oil binding structures made of leather filled polymers, International symposium on fibers, fibrous structures and filtration, St. Louis, USA (2004). 4/5 Publikationsverzeichnis
Poster Ziegmann, G.; Fideu Siagam, P.; Bosse, M.; Niemeyer, S.; Kirchberg, S.: Innovative Leichtbaukonzepte mittels Faserverbundsystemen, 8. Dresdner Leichtbausymposium Effiziente Leichtbaulösungen durch Technologiekompetenz (2004). 2012 Brunotte, G.-P.; Zivanovic, J.; Kirchberg, S.; Ziegmann, G.: Synthesis and processing of soft magnetic thermoplast nano@microparticle compounds, 15th European Conference on Composite Materials, Venice, Italy (2012). 2010 Kirchberg, S.; Ziegmann, G.: Viscosity modelling of PP/FeSi-composites based on Cox-Merz relation and modified Carreau model, 26 th Polymer Processing Society, Banff, Kanada (2010). Kirchberg, S.; Ziegmann, G.: Einfluss von Füllgrad und Geometrie weichmagnetischer Partikel auf die Verarbeitungs- und Materialeigenschaften ausgewählter Thermoplaste, 16. Nationale SAMPE-Tagung, Institut für Clausthal-Zellerfeld (2010). 2009 Kirchberg, S.; Turan, C.; Ziegmann, G.; Rudolph, M.; Peuker, U.A.: Synthesis and Processing of Superparamagnetic PMMA/Fe 3 O 4 -Nanocomposites, Pacific Polymer Conference (PPC), Cairns/Australien (2009). Rudolph, M; Peuker, U.A.; Kirchberg, S.; Ziegmann, G.; Turan, C. : Synthese hochgefüllter Polymer-Nanopartikel-Komposite, ProcessNet-Jahrestagung, Mannheim (2009). 2008 Kirchberg, S.; Ziegmann, G.: Hochgefüllte Thermoplaste Verarbeitung, Rheologie und Thermische Analyse, Workshop: Funktionalisierte Polymersysteme in der Mikrosystemtechnik, Zentrum für Mikroproduktion e.v., Clausthal-Zellerfeld (2008). 2005 Kirchberg, S.; Ziegmann, G.; Reich, S.: Analysis on the rheological behaviour of paper fibre suspensions within linear elastic deformation, 21 th Polymer Processing Society (PPS-21), Leipzig (2005). 2003 Ziegmann, G.; Frormann, L.; Kirchberg, S.; Niemeyer, S.; Bosse, M.: Papierspritzgießen, EUROMOLD, Frankfurt/Main (2003). Ziegmann, G.; Frormann, L.; Kirchberg, S.; Niemeyer, S., Bosse, M.: Entwicklung eines Verfahrens zur kostengünstigen Herstellung von komplexen Bauteilen aus Papierwerkstoffen auf der Basis einer modifizierten Spritzgießtechnologie, naro.tech, Erfurt (2003). 5/5 Publikationsverzeichnis