Adorage preview DE - EN
Flag overlay effect How to use flag effects (from Volume 11) In this tutorial, Adorage is being used as a stand-alone-version. You will learn how to create an Adorage-effect in a video clip. In order to do so, the first step is to import a clip twice into the proceeding steps area - first into Video A, then into Video B. For further details, you can also check the unit Using Adorage as Plug-in and as Stand-alone-version. You can then edit the flag's properties - such as Covering, Fade-IN, Fade-OUT of the Overlay graphics, or Size and Position of the Spanish map that we use as a file that defines the contour, according to your own ideas. First select effect number 20 from Volume 11/Countries/Spain/Flags, double-click and you can see the effect in the preview window. Now go to the proceeding steps area and double-click the dialogue box Overlay to open it. 3
In this section you can change some features, for example the Overlay graphics. In our screenshot, you can see that we have selected the file spain-2.avi. By clicking on the file button you can import an overlay file of your own choice. In our tutorial we continue with the pre-selected file as well as with the pre-selected Mixer-Mask. As the latter one is activated, we can determine the sharpness of the edges of the mixer-mask by moving the Border sharpness slide control. If you choose 100%, you will achieve the highest border sharpness possible for your mixer-mask herz.tif, that has been previously selected in the dialogue box Mixer. 4
By contrast, if you choose Border sharpness 40%, the edge of the mixer mask herz. tif will appear notably softer. 5
The Covering slide control lets you set the covering of the overlay graphic, e.g. the Spanish flag, as in our example. If you set 60% for instance, the flag will be more dominant, i.e. the underlying objects (the clip and the map, for example) are less visible. 6
The Fade IN and Fade OUT slide controls let you change the transition path of the flag. In the screenshot above these lines, Fade IN is set to 25% and Fade OUT is set to 82%. By setting the Fade IN slide control to 10% you will the flag appear earlier in the clip. If you set Fade OUT to 90% the fading out will start later than in our example. We recommend deactivating the option use the Mixer-Mask in order to achieve a better preview of the filter effect. 7
For this effect, you need to reactivate the use the Mixer-Mask option again. After doing so, go to the register Mixer. 8
Now choose another Threshold file by clicking the File button, for example you can select the kreis.tif file. Of course you can import your own files (*.tif), too. 9
You will notice now that the Fading In and the Fading Out effects will be generating in a round mask (instead of the heart-shaped mask that had been used before). Now you can select the exact position of the map. In order to do so, click the Motion option in the Border color area. The dialogue Motion opens. Choose the register Starting and Ending where you can determine the exact size and position of the Spanish map throughout the animation. This means that the size and position of the map won t change and there will be no movement of the map. 10
Set the Position slide buttons (vertical and horizontal) and the Size slide buttons (vertical and horizontal) as we did in the following screenshot. You can see the new size and position immediately in the preview window. The contours of the Spanish map will be bigger now and you will see them in the center of the preview window. 11
Note: By choosing different settings for the Starting point of the mask and for the End point of the mask, the map will be automatically animated. Now click OK to close the Motion dialogue box. In the Mixer register you can see the new size and position. The task of defining a new position and a new size of the map is finished now. 12
The settings Starting point of the mask and End point of the mask lets you define how much of the Spanish map will be shown at the beginning and at the end of the animation. 13
By setting the Starting point of the mask to 20% and the End point of the mask to 80%, for instance, you will achieve that immediately after the start of the animation 20% of the map will be seen. Click on OK now to apply the settings. The following animation will be shown in the Adorage effect preview. 14
Due to the new threshold-file kreis.tif that we chose above, the Spanish flag now appears at the edge of the preview. Our aim is to fade the flag in from the center of the window. In order to do so, double-click the option Mixer in the Proceeding steps area. The Mixer dialogue box opens. Activate the Invert graphic option in the Properties of the mask area in order to invert the course of the mask. Click OK again and you will see the new course of the animation in the Adorage effect preview. The animation of the flag now starts from the center of the preview window. 15
Now click Export Sequence to export the effect into a folder. If you have used Adorage as a plug-in in your video editing software click OK. By doing so, the Adorage effect (or transition) will be placed directly in the timeline of your Editing software. You can see the effect and the transition in the preview of your editing software. 16
VidCom 30th-century S.L. 2010 Überlagerungseffekte und Masken 1. Die Anwendung eines Adorage-Effektes mit integrierter Überblendung (Adorage Volume 10) Im nun folgenden Workshop wird Adorage als stand-alone-version eingesetzt. Es wird ein Adorage-Effekt auf ein Videoclip erstellt, d.h. Sie importieren das gleiche Video als Video A und B im Bereich Arbeitsschritte. Alle Details erhalten Sie auch hier in der Lektion Adorage als Plugin und Stand-alone anwenden. In dieser Lektion steht die Anwendung eines Adorage-Effektes mit integrierter Überblendung im Vordergrund. In Adorage finden Sie bereits einige Effektvorlagen die neben einem Überlagerungseffekt (z.b. Flugzeug), zusätzlich eine Maske zum Blenden des Effektes beinhalten. Zuerst wählen Sie einen dieser Effekte aus den Effektvorlagen (z.b. aus der Kategorie Diverse Motiv-Effekte/Tiere) den Effekt Schmetterling03. Der Effekt wird sofort in der Vorschau angezeigt. Nun öffnen Sie in den Dialog Mixer, denn hier wählen Sie dann eine neue Schwellwert-Datei (bestimmt den Blendenverlauf) und eine neue Farbgebung der Kontur. Klicken Sie nun im Bereich Arbeitsschritte auf die Option Mixer. Es öffnet der Dialog Mixer. 41
VidCom 30th-century S.L. 2010 Im Bereich Eigenschaften der Maske belassen Sie die Option Schwellwert-Datei und importieren zuerst im darunter liegenden Feld durch Klick auf den Ordner-Button eine neue geeignete Schwellwert-Datei (z.b. fernglas.tif). Bei der Installation von Adorage werden verschiedene Masken abgespeichert, die Sie nun verwenden können. Selbstverständlich können Sie auch eigene Masken als TIF-Datei erstellen und hier als Schwellwert-Datei importieren (z.b. in Adobe Photoshop). Jetzt wird der veränderte Verlauf der Blenden-Maske in der Vorschau dargestellt. Jetzt optimieren Sie die Schwellwert-Datei weiter, z.b. durch die Veränderung der Konturschärfe (auf 40%), die Veränderung wird in der Vorschau sichtbar. Die Kanten der Maske werden härter dargestellt. 42
VidCom 30th-century S.L. 2010 Jetzt wechseln Sie in den Bereich Farbgebung der Kontur und wählen eine neue Datei zur Kontur-Darstellung aus. Importieren Sie im darunter liegenden Feld durch Klick auf den Ordner- Button eine geeignete Datei (z.b. ein eigenes Logo, logo-intro.bmp). Die neue Datei wird sofort in der Vorschau angezeigt und mit Hilfe der Schwellwert-Datei eingeblendet. Mit dem Regler Helligkeit der Kontur bestimmen Sie die Intensität der Schwellwert-Datei, also der Datei, die die Einblendung des Logos übernimmt. Eine Veränderung von 55% (Voreinstellung) auf 100% erhöht die Intensität bzw. die Leuchtkraft. Der blaue Hintergrund des Logos wird in diesem Fall als Kontur-Blendenfarbe genutzt. 43
VidCom 30th-century S.L. 2010 Damit haben Sie einen neuen Blendenverlauf sowie ein Logo im Effekt eingemixt. Wechseln Sie jetzt in das Register Überlagerung. Es wird hier in der Vorschau auch der als Überlagerungs-Datei eingefügte Schmetterling sichtbar. Aktuell wird dieser animiert von links unten nach rechts oben im Effekt angezeigt. 44
VidCom 30th-century S.L. 2010 Nun verändern wir die Flugrichtung des Schmetterlings wie folgt. Klicken Sie auf den Button Bewegung im Bereich Überlagerungsgraphik. Es öffnet er Dialog Bewegung... mit dem aktiven Register Startposition. 45
VidCom 30th-century S.L. 2010 Verschieben Sie nun die Startposition des Schmetterlings mit dem Regler Lage Hrz. auf 46% (nach rechts unten) und die Rotation auf -8% (Drehung des Schmetterlings). 46
VidCom 30th-century S.L. 2010 Nun wechseln Sie in das Register Endposition und verschieben nun die Endposition des Schmetterlings mit dem Regler Lage Hrz. auf -64% (nach links oben), die Lage Vert. auf - 22% und die Rotation auf -6% (Drehung des Schmetterlings). Die neue Flugrichtung des Schmetterlings (von rechts unten nach links oben) wird sofort in der Vorschau angezeigt. Natürlich können Sie auch die Größe des Schmetterlings einstellen, nutzen Sie dazu die Regler für Größe in Hrz. und Vert. Richtung. 47
VidCom 30th-century S.L. 2010 Damit sind die Einstellungen im Dialog Bewegung abgeschlossen, verlassen Sie den Dialog Bewegung durch Klick auf OK. Klicken Sie erneut auf OK, so schließt der Dialog Überlagerung. Nun ist der Effekt fertig und in der Vorschau sichtbar. Es wurde einige Veränderungen am Standardeffekt vorgenommen, u.a. eine neue Schwellwert-Datei gewählt und in den Eigenschaften verändert. Ferner wurde eine neue Datei für Farbgebung der Kontur gewählt und damit ein Logo im Effekt platziert. Abschließend wurde die Flugrichtung und Rotation des Schmetterlings (Überlagerungsgraphik) verändert. 48
VidCom 30th-century S.L. 2010 Klicken Sie jetzt auf Export Sequence um den Effekt in eine Datei zu exportieren. Wenn Sie jedoch Adorage als Effekt oder Blende in Ihrer Schnittsoftware eingesetzt haben, dann klicken Sie auf OK. Der Adorage-Effekt (oder die Adorage-Blende) wird direkt in die Timeline der Schnittsoftware übernommen. In der Vorschau kann nun der Adorage-Effekt oder die Blende betrachtet werden. 49