Technische Produktinformation Produkt: 1150 Beschreibung: Polyesterfolie weiß mit Drucklack Anwendung: Indigoverfahren Erfüllte EU - Richtlinien: Verpackungsrichtlinie 94/62/EC; Schwermetalle, PBB und PBDE 2003/11 Obermaterial: Dicke: DIN 53 353 50µm Reißfestigkeit: DIN 53 353 längs: k.a. N/mm² quer: k.a. N/mm² Reißdehnung: DIN 53 353 längs: k.a. % quer: k.a. % Klebstoffe: Copolymere Acrylate, lösemittelfrei, hervorragende Licht- und Alterungsbeständigkeit, erfüllen die Spielzeugnorm EN 71/ Teil 3. Alle Klebstoffe sind für den Einsatz auf trockenen und feuchten, nicht fettenden Lebensmitteln geeignet (ISEGA Unbedenklichkeitserklärung). Klebkraft FTM 1 Glas 24h in N/25 mm Andere Produktkombinationen auf Anfrage. BEZ. P3 P6 d16 >8 >8 k7w >8 P3 = semi-permanent, P6 = permanent Abdeckung: H + S Chlorfrei gebleichtes Kraftpapier, Silikonisierung lösemittelfrei, klimastabilisiert für hervorragende Planlage Abdeckung: K w=weiß g=gelb d=high density Superkalandriertes Glassinepapier, hohe Reißfestigkeit, hervorragende Stanzeigenschaften, lösemittelfreie Silikonisierung für höchste Spendegeschwindigkeiten Abdeckung: D beidseitig mit Polyethylen beschichtetes Kraftpapier Abdeckung: C PET-Folie, silikonisiert, für höchste Spendegeschwindigkeiten Abdeckung Dicke EN 20 534 Flächengewicht: ISO 536 d16 0,165 mm 144 g/m² k7w 0,062 mm 72 g/m² Anwendungstechnische Daten: Empfohlene Verarbeitungstemperatur: mind. + 5 ºC Temperaturbeständigkeit: - 30 bis + 90 ºC Haltbarkeit bei sachgemäßer Anwendung: 1 Jahr Lagerfähigkeit bei 20ºC, 50% r.f.: bei ungeöffneter Originalverpackung 1 Jahr
Technische Produktinformation Produkt: 1155 Beschreibung: Polyesterfolie silber matt mit Drucklack Anwendung: Indigoverfahren Erfüllte EU - Richtlinien: Verpackungsrichtlinie 94/62/EC; Schwermetalle, PBB und PBDE 2003/11 Obermaterial: Dicke: DIN 53 353 50µm Reißfestigkeit: DIN 53 353 längs: k.a. N/mm² quer: k.a. N/mm² Reißdehnung: DIN 53 353 längs: k.a. % quer: k.a. % Klebstoffe: Copolymere Acrylate, lösemittelfrei, hervorragende Licht- und Alterungsbeständigkeit, erfüllen die Spielzeugnorm EN 71/ Teil 3. Alle Klebstoffe sind für den Einsatz auf trockenen und feuchten, nicht fettenden Lebensmitteln geeignet (ISEGA Unbedenklichkeitserklärung). Klebkraft FTM 1 Glas 24h in N/25 mm Andere Produktkombinationen auf Anfrage. BEZ. P3 P6 d16 >8 k7w >8 P3 = semi-permanent, P6 = permanent Abdeckung: H + S Chlorfrei gebleichtes Kraftpapier, Silikonisierung lösemittelfrei, klimastabilisiert für hervorragende Planlage Abdeckung: K w=weiß g=gelb d=high density Superkalandriertes Glassinepapier, hohe Reißfestigkeit, hervorragende Stanzeigenschaften, lösemittelfreie Silikonisierung für höchste Spendegeschwindigkeiten Abdeckung: D beidseitig mit Polyethylen beschichtetes Kraftpapier Abdeckung: C PET-Folie, silikonisiert, für höchste Spendegeschwindigkeiten Abdeckung Dicke EN 20 534 Flächengewicht: ISO 536 d16 0,165 mm 144 g/m² k7w 0,062 mm 72 g/m² Anwendungstechnische Daten: Empfohlene Verarbeitungstemperatur: mind. + 5 ºC Temperaturbeständigkeit: - 30 bis + 90 ºC Haltbarkeit bei sachgemäßer Anwendung: 1 Jahr Lagerfähigkeit bei 20ºC, 50% r.f.: bei ungeöffneter Originalverpackung 1 Jahr
Technische Produktinformation Produkt: 1154 Beschreibung: Polyesterfolie silber glänzend mit Drucklack Anwendung: Indigoverfahren Erfüllte EU - Richtlinien: Verpackungsrichtlinie 94/62/EC; Schwermetalle, PBB und PBDE 2003/11 Obermaterial: Dicke: DIN 53 353 50µm Reißfestigkeit: DIN 53 353 längs: k.a. N/mm² quer: k.a. N/mm² Reißdehnung: DIN 53 353 längs: k.a. % quer: k.a. % Klebstoffe: Copolymere Acrylate, lösemittelfrei, hervorragende Licht- und Alterungsbeständigkeit, erfüllen die Spielzeugnorm EN 71/ Teil 3. Alle Klebstoffe sind für den Einsatz auf trockenen und feuchten, nicht fettenden Lebensmitteln geeignet (ISEGA Unbedenklichkeitserklärung). Klebkraft FTM 1 Glas 24h in N/25 mm Andere Produktkombinationen auf Anfrage. BEZ. P3 P6 d16 >8 >8 k7w >8 P3 = semi-permanent, P6 = permanent Abdeckung: H + S Chlorfrei gebleichtes Kraftpapier, Silikonisierung lösemittelfrei, klimastabilisiert für hervorragende Planlage Abdeckung: K w=weiß g=gelb d=high density Superkalandriertes Glassinepapier, hohe Reißfestigkeit, hervorragende Stanzeigenschaften, lösemittelfreie Silikonisierung für höchste Spendegeschwindigkeiten Abdeckung: D beidseitig mit Polyethylen beschichtetes Kraftpapier Abdeckung: C PET-Folie, silikonisiert, für höchste Spendegeschwindigkeiten Abdeckung Dicke EN 20 534 Flächengewicht: ISO 536 d16 0,165 mm 144 g/m² k7w 0,062 mm 72 g/m² Anwendungstechnische Daten: Empfohlene Verarbeitungstemperatur: mind. + 5 ºC Temperaturbeständigkeit: - 30 bis + 90 ºC Haltbarkeit bei sachgemäßer Anwendung: 1 Jahr Lagerfähigkeit bei 20ºC, 50% r.f.: bei ungeöffneter Originalverpackung 1 Jahr
Technische Produktinformation Produkt: 1132 Beschreibung: Monomer weichgemachte PVC-Folie transparent mit Drucklack Anwendung: Indigoverfahren Erfüllte EU - Richtlinien: Verpackungsrichtlinie 94/62/EC; Schwermetalle, PBB und PBDE 2003/11 Obermaterial: Dicke: DIN 53 353 80µm Reißfestigkeit: DIN 53 353 längs: k.a. N/mm² quer: k.a. N/mm² Reißdehnung: DIN 53 353 längs: k.a. % quer: k.a. % Klebstoffe: Copolymere Acrylate, lösemittelfrei, hervorragende Licht- und Alterungsbeständigkeit, erfüllen die Spielzeugnorm EN 71/ Teil 3. Alle Klebstoffe sind für den Einsatz auf trockenen und feuchten, nicht fettenden Lebensmitteln geeignet (ISEGA Unbedenklichkeitserklärung). Klebkraft FTM 1 Glas 24h in N/25 mm Andere Produktkombinationen auf Anfrage. BEZ. P3 h12 >8 P3 = semi-permanent Abdeckung: H + S Chlorfrei gebleichtes Kraftpapier, Silikonisierung lösemittelfrei, klimastabilisiert für hervorragende Planlage Abdeckung: K w=weiß g=gelb d=high density Superkalandriertes Glassinepapier, hohe Reißfestigkeit, hervorragende Stanzeigenschaften, lösemittelfreie Silikonisierung für höchste Spendegeschwindigkeiten Abdeckung: D beidseitig mit Polyethylen beschichtetes Kraftpapier Abdeckung: C PET-Folie, silikonisiert, für höchste Spendegeschwindigkeiten Abdeckung Dicke EN 20 534 Flächengewicht: ISO 536 h12 0,136 mm 135 g/m² Anwendungstechnische Daten: Empfohlene Verarbeitungstemperatur: mind. + 5 ºC Temperaturbeständigkeit: - 30 bis + 90 ºC Haltbarkeit bei sachgemäßer Anwendung: 1 Jahr Lagerfähigkeit bei 20ºC, 50% r.f.: bei ungeöffneter Originalverpackung 1 Jahr
Technische Produktinformation Produkt: 1130 Beschreibung: Monomer weichgemachte PVC-Folie weiß mit Drucklack Anwendung: Indigoverfahren Erfüllte EU - Richtlinien: Verpackungsrichtlinie 94/62/EC; Schwermetalle, PBB und PBDE 2003/11 Obermaterial: Dicke: DIN 53 353 80µm Reißfestigkeit: DIN 53 353 längs: k.a. N/mm² quer: k.a. N/mm² Reißdehnung: DIN 53 353 längs: k.a. % quer: k.a. % Klebstoffe: Copolymere Acrylate, lösemittelfrei, hervorragende Licht- und Alterungsbeständigkeit, erfüllen die Spielzeugnorm EN 71/ Teil 3. Alle Klebstoffe sind für den Einsatz auf trockenen und feuchten, nicht fettenden Lebensmitteln geeignet (ISEGA Unbedenklichkeitserklärung). Klebkraft FTM 1 Glas 24h in N/25 mm Andere Produktkombinationen auf Anfrage. BEZ. P3 h12 >8 k7w >8 D18 >8 P3 = semi-permanent Abdeckung: H + S Chlorfrei gebleichtes Kraftpapier, Silikonisierung lösemittelfrei, klimastabilisiert für hervorragende Planlage Abdeckung: K w=weiß g=gelb d=high density Superkalandriertes Glassinepapier, hohe Reißfestigkeit, hervorragende Stanzeigenschaften, lösemittelfreie Silikonisierung für höchste Spendegeschwindigkeiten Abdeckung: D beidseitig mit Polyethylen beschichtetes Kraftpapier Abdeckung: C PET-Folie, silikonisiert, für höchste Spendegeschwindigkeiten Abdeckung Dicke EN 20 534 Flächengewicht: ISO 536 h12 0,136 mm 135 g/m² k7w 0,062 mm 72 g/m² D18 0,150 mm 135 g/m² Anwendungstechnische Daten: Empfohlene Verarbeitungstemperatur: mind. + 5 ºC Temperaturbeständigkeit: - 30 bis + 90 ºC Haltbarkeit bei sachgemäßer Anwendung: 1 Jahr Lagerfähigkeit bei 20ºC, 50% r.f.: bei ungeöffneter Originalverpackung 1 Jahr
Polyester Films for HP Indigo Digital Presses Description: Clear 175 micron polyester film optimized for printing by Industrial and Commercial HP Indigo digital presses, available in roll and tip-backed sheet form. Item number: K17547U Product Specifications: Color Item no. Appearance Base Film Thickness Area Yield Tensile Strength Elongation at break Shrinkage MD TD MD TD MD TD Clear K17547U Clear 175 4.1 10 10 70 70 2 1 Units -- -- µm m 2 /kg Kgf/mm 2 % % Test Method -- -- Thwing- Albert thickness tester -- ASTM D 882 ASTM D 882 After 5 minutes at 190 0 C The maximum working temperature is 150 0 C These products are for interior use only Subject to testing and sales conditions outlined in main data sheet Kibbutz Hanita 22885 Israel l Tel: +972-4-9859919 l Fax: +972-4-9859920 l hanita@hanitacoatings.com www.hanitacoatings.com Ed-B, DS No. 2047/10, Page 1 of 1, Nov 2009
Hanita Coatings INDIGO OPTIMIZED SUBSTRATES I24210 PRODUCT DATA 250 Micron (10 mil) White Rigid Vinyl Matte/Matte Indigo Coated 2 Sides Dura-Go substrates are Indigo-licensed and were jointly developed by Hanita Coatings, Tekra Corporation and Indigo to create the premier product line of film substrates for Indigo digital presses. Our proprietary primer coatings provide a number of benefits, including: Reliable, superior ink adhesion High definition of colors Long shelf life, guaranteed to print for one year after purchase when stored at less than 72F and less than 50% relative humidity. The Dura-Go coating is highly resistant to weathering/degradation: Units Test Conditions Weatherability 2 Months Outdoor 24 Months Indoor Dish Washer pass N/A 1.5 hours, top cycle Water and 200 Hours 100% RH at 100F Chemical Resistance 200 Hours Distilled Water at 90F 2 Hours Water + 2% detergent at 150F 24 Hours Ethanol at 75F Rigid vinyl is suitable for virtually all printing applications and offers a variety of print surfaces to fit your specific printing needs. Rigid vinyl copolymer print stock also offers excellent flex properties, embossed character retention and color consistency making it the ideal product for virtually all applications where long life, durability and performance are critical. Such applications include menus, POP displays and shelf danglers.
Rigid vinyl physical properties include: Measure Unit Tensile Strength 5400-6100 psi Flexural Strength 8400-9600 psi Impact Strength-Izod Notched 3 to 10 Ft. lbs./in of notch Dura-Go rigid vinyl is available in sheets. The application suggestions, specifications and other data described here are based on experience that is believed by Tekra Corporation and Hanita Coatings to be reliable. Because of the characteristics of these products, you should, before using these products in production, perform your own tests to determine to your satisfaction whether these products are acceptable and suitable for your particular purposes under your operation conditions. Any order for these products will be subject to Seller s terms and conditions of sale.
Hanita Coatings INDIGO OPTIMIZED SUBSTRATES I22212KJ Dura-Go /Pentacard 300 Micron (12 mil) White Rigid Vinyl Matte/Matte Indigo Coated 1 Side for the Card Market PRODUCT DATA Dura-Go substrates are Indigo-licensed and were jointly developed by Hanita Coatings, Tekra Corporation and Indigo to create the premier product line of film substrates for Indigo digital presses. Our proprietary primer coatings provide a number of benefits, including: Reliable, superior ink adhesion High definition of colors Long shelf life, guaranteed to print for one year after purchase when stored at less than 72F and less than 50% relative humidity. The Dura-Go coating is highly resistant to weathering/degradation: Units Test Conditions Weatherability 2 Months Outdoor 24 Months Indoor Dish Washer pass N/A 1.5 hours, top cycle Water and 200 Hours 65% RH at 80F Chemical Resistance 200 Hours Distilled Water at 90F 2 Hours Water + 2% detergent at 150F 24 Hours Ethanol at 75F Dura-Go /Pentacard is a rigid opaque high impact matte core stock coated for the HP Indigo presses designed for a broad range of card applications, including split core lamination, and has excellent laminating properties.
Rigid vinyl physical properties include: Property Test Method Units Value Gauge Tolerance D-374 % +/- 5.0% typical Specific Gravity D-792 ----- 1.35* Material Yield (Nominal) D-792 in 2 /lb. 1520 (13.5mil) Tensile Strength (Yield) D-882 lb./in. 2 6400 Elongation (Break) D-882 % 150 Tensile Impact Strength D-1822 MOD Inch-lb./mil 270 Cold Break Temp. D-1790 C -20 VICAT Temp. D1525A C 78 Flex Resistance (Embossed & Overlaid) A. Little # Flexes 4000 Laminating Temp. (est) ---- F 295 Surface Roughness (Ra) Perthometer Micro-in. Per customer request # above 20 Peak Density Perthometer micro-in/cm 100 *Color Dependent Dura-Go /Pentacard rigid vinyl is available in sheets. The application suggestions, specifications and other data described here are based on experience that is believed by Tekra Corporation and Hanita Coatings to be reliable. Because of the characteristics of these products, you should, before using these products in production, perform your own tests to determine to your satisfaction whether these products are acceptable and suitable for your particular purposes under your operation conditions. Any order for these products will be subject to Seller s terms and conditions of sale.
Hanita Coatings INDIGO OPTIMIZED SUBSTRATES I62012 PRODUCT DATA 300 Micron (12 mil) White Translucent Styrene Indigo Coated 2 Sides Dura-Go substrates are Indigo-licensed and were jointly developed by Hanita Coatings, Tekra Corporation and Indigo to create the premier product line of film substrates for Indigo digital presses. Our proprietary primer coatings provide a number of benefits, including: Reliable, superior ink adhesion High definition of colors Long shelf life, guaranteed to print for one year after purchase when stored at less than 72F and less than 50% relative humidity. The Dura-Go coating is highly resistant to weathering/degradation: Units Test Conditions Weatherability 2 Months Outdoor 24 Months Indoor Dish Washer pass N/A 1.5 hours, top cycle Water and 200 Hours 65% RH at 80F Chemical Resistance 200 Hours Distilled Water at 90F 2 Hours Water + 2% detergent at 150F 24 Hours Ethanol at 75F High impact polystyrene offers an economical printing surface for numerous applications including backlit signs, indoor signage/posters, shelf danglers and name tags. The film also offers ease of handling, being easy to diecut, guillotine cut and punch.
Physical properties include: Measure Unit Impact Strength 1.7 Ft. lbs./in. of notch Tensile Strength at Break 3200 psi Tensile Strength at Yield 3100 psi Tensile Elongation at Break 45% N/A Vicat Softening Point 210 Degrees F Dura-Go white translucent styrene is available in sheets. The application suggestions, specifications and other data described here are based on experience that is believed by Tekra Corporation and Hanita Coatings to be reliable. Because of the characteristics of these products, you should, before using these products in production, perform your own tests to determine to your satisfaction whether these products are acceptable and suitable for your particular purposes under your operation conditions. Any order for these products will be subject to Seller s terms and conditions of sale.
Hanita Coatings INDIGO OPTIMIZED SUBSTRATES I24215 PRODUCT DATA 375 Micron (15 mil) White Rigid Vinyl Matte/Matte Indigo Coated 2 Sides Dura-Go substrates are Indigo-licensed and were jointly developed by Hanita Coatings, Tekra Corporation and Indigo to create the premier product line of film substrates for Indigo digital presses. Our proprietary primer coatings provide a number of benefits, including: Reliable, superior ink adhesion High definition of colors Long shelf life, guaranteed to print for one year after purchase when stored at less than 72F and less than 50% relative humidity. The Dura-Go coating is highly resistant to weathering/degradation: Units Test Conditions Weatherability 2 Months Outdoor 24 Months Indoor Dish Washer pass N/A 1.5 hours, top cycle Water and 200 Hours 65% RH at 80F Chemical Resistance 200 Hours Distilled Water at 90F 2 Hours Water + 2% detergent at 150F 24 Hours Ethanol at 75F Rigid vinyl is suitable for virtually all printing applications and offers a variety of print surfaces to fit your specific printing needs. Rigid vinyl copolymer print stock also offers excellent flex properties, embossed character retention and color consistency making it the ideal product for virtually all applications where long life, durability and performance are critical. Such applications include menus, POP displays and shelf danglers.
Rigid vinyl physical properties include: Measure Unit Tensile Strength 5400-6100 psi Flexural Strength 8400-9600 psi Impact Strength-Izod Notched 3 to 10 Ft. lbs./in of notch Dura-Go rigid vinyl is available in sheets. The application suggestions, specifications and other data described here are based on experience that is believed by Tekra Corporation and Hanita Coatings to be reliable. Because of the characteristics of these products, you should, before using these products in production, perform your own tests to determine to your satisfaction whether these products are acceptable and suitable for your particular purposes under your operation conditions. Any order for these products will be subject to Seller s terms and conditions of sale.
Hanita Coatings INDIGO OPTIMIZED SUBSTRATES I24224KJ PRODUCT DATA Dura-Go /Pentacard 600 Micron (24 mil) White Rigid Vinyl Matte/Matte Indigo Coated 2 Sides for the Card Market Dura-Go substrates are Indigo-licensed and were jointly developed by Hanita Coatings, Tekra Corporation and Indigo to create the premier product line of film substrates for Indigo digital presses. Our proprietary primer coatings provide a number of benefits, including: Reliable, superior ink adhesion High definition of colors Long shelf life, guaranteed to print for one year after purchase when stored at less than 72F and less than 50% relative humidity. The Dura-Go coating is highly resistant to weathering/degradation: Units Test Conditions Weatherability 2 Months Outdoor 24 Months Indoor Dish Washer pass N/A 1.5 hours, top cycle Water and 200 Hours 65% RH at 80F Chemical Resistance 200 Hours Distilled Water at 90F 2 Hours Water + 2% detergent at 150F 24 Hours Ethanol at 75F Dura-Go /Pentacard is a rigid opaque high impact matte core stock coated for the HP Indigo presses designed for a broad range of card applications, including split core lamination, and has excellent laminating properties.
Rigid vinyl physical properties include: Property Test Method Units Value Gauge Tole rance D-374 % +/- 5.0% typical Specific Gravity D-792 ----- 1.35* Material Yield (Nominal) D-792 in 2 /lb. 1520 (13.5mil) Tensile Strength (Yield) D-882 lb./in. 2 6400 Elongation (Break) D-882 % 150 Tensile Impact Strength D-1822 MOD Inch-lb./mil 270 Cold Break Temp. D-1790 C -20 VICAT Te mp. D1525A C 78 Flex Resistance (Embossed & Overlaid) A. Little # Flexes 4000 Laminating Te mp. (est) ---- F 295 Surface Roughness (Ra) Perthometer Micro-in. Per customer request Peak Density Perthometer # above 20 micro-in/cm 100 *Color Dependent Dura-Go /Pentacard rigid vinyl is available in sheets. The application suggestions, specifications and other data described here are based on experience that is believed by Tekra Corporation to be reliable. Because of the characteristics of these products, you should, before using these products in production, perform your own tests to determine to your satisfaction whether these products are acceptable and suitable for your particular purposes under your operation conditions. Any order for these products will be subject to Tekra Corporation s terms and conditions of sale.