ø 18-47 mm SAS 835/1035 ø 57-75 mm ø 32, 36 mm, glatt / smooth Katalog / catalogue
Artikelnummer item number (WR) SAS 835/1035 Zubehör / accessories Bezeichnung specification S 555/700 63,5 mm / grade 80 18 26,5 32 36 40 47 57 65 75 SAS Spannstab, warm gewalzt, rechtsgängig SAS stress bar, hot rolled, right hand thread WR 1928 - Ankerplatte, Konus 30 / anchor plate, cone 30 WR 2001 - Kugelbundmutter, 55 / domed nut, 55 WR 2002 - Ankermutter, gerade / anchor nut, flat WR 2002 - EP Ankermutter EP, gerade / anchor nut EP, flat WR 2011 - Ankerplatte, quad. 55 / anchor plate, square, 55 WR 2012 - Ankerplatte, recht. 55 / anchor plate, rect. 55 WR 2074 - QR-Platte / QR-plate WR 2099 - Kugelbundmutter, 55 mit Verpressnuten domed nut, 55 with grout slots WR 2139 - Ankerplatte, gerade / anchor plate, flat WR 2963 - Ankermutter, ballig, 30 / bull nose nut, 30 WR 2963 - EP Ankermutter EP, ballig, 30 / bull nose nut EP, 30 WR 3003 - Muffe, Standard / coupler, standard WR 3003 - EP Muffe EP, Standard / coupler EP, standard WR 3009 - Sechskantmuffe / hexagonal coupler WR 3009 - EP Sechskantmuffe EP / hexagonal coupler EP WR 3803 - DYN-Muffe / DYN-coupler WR 5005 - Haltemutter / fix nut WR 5005 - EP Haltemutter EP / fix nut EP WR 8002 - Spannverankerung / stressing-anchorage WR 8003 - Spann-Muffe / stressing-coupler (WR) SAS 835/1035 SAS Spannstab, warm gewalzt, rechtsgängig SAS stress bar, hot rolled, right hand thread WS 2001 - Kugelbundmutter, 55 / domed nut, 55 WS 2002 - Ankermutter, gerade / anchor nut, flat WS 2011 - Ankerplatte, quad. 55 / anchor plate, square, 55 WS 2012 - Ankerplatte, recht. 55 / anchor plate, rect. 55 WS 2099 - Kugelbundmutter, 55 mit Verpressnuten domed nut, 55 with grout slots WS 3003 - Muffe, Standard / coupler, standard WS 3004 - Übergangsmuffe / transition coupler WS 5005 - Haltemutter EP / fix nut EP WS 8004 - Spann-Muffe für WS / stressing-coupler for WS erhältlich - entsprechend ETA 05/122 / available - acc. to ETA 05/122 erhältlich - Spannstahl zugelassen durch DIBt, für das Spannverfahren ist das deutsche Anwendungsdokument anzuwenden / available - prestressing steel approved by DIBt, for PT system please refer to German application document erhältlich / available Gewichtsabweichungen aufgrund von Maßtoleranzen möglich/discrepancies in weight due to dimension tolerance are possible Seite 1 / Page 1
Zubehör / accessories SAS Spannstäbe / SAS stress bars SAS 835/1035 18-47 mm 57-75 mm SAS Spannstahl warmgewalzt, Rippenstahl - rechtsgängig SAS stress bar hot rolled, ribbed - right hand thread d 18 26,5 32 36 40 47 57 65 75 max da 21 31 37 42 46 53 64 72 82 c 8 13 16 18 20 21 21 21 24 f p0,1k / f pk / A 1) 10 950 N/mm² / 1050 N/mm² / 7 % 835 N/mm²/1035 N/mm²/ 7% F yk (F p0,1k ) [kn] 230 525 760 960 1190 1650 2155 2780 3690 F pk [kn] 255 580 845 1070 1320 1820 2671 3447 4572 A [mm²] 241 551 804 1020 1257 1735 2581 3331 4418 G [kg/m] 1,96 4,48 6,53 8,27 10,21 14,10 20,95 27,10 35,90 1) Bruchdehnung S 555/700 bezogen 63,5 auf mm den / grade 10-fachen 80 Stabdurchmesser ultimate elongation in a gauge length to 10 bar diameters Seite 2 / Page 2
Zubehör / accessories Kugelbundmutter, 55 domed nut, 55 Kugelbundmutter, 55 mit Verpressnuten domed nut, 55 with grout slots Ankerplatte, quadratisch, 55 anchor plate, square, 55 Ankerplatte, rechteckig, 55 anchor plate, rectangular, 55 WR 2001 - WR 2099 - WR 2011 - WR 2012 - SW x L x d [kg] SW x L x d [kg] a x c x d 1 [kg] a x b x c x d 1 [kg] 18 36 x 55 x 50 0,43 36 x 55 x 50 0,40 110 x 30 x 28 x 45 2,66 100 x 130 x 30 x 28 x 45 2,87 26,5 50 x 75 x 72 1,09 50 x 75 x 72 1,02 150 x 35 x 39 x 72 5,73 130 x 150 x 35 x 39 x 72 4,90 32 60 x 90 x 80 1,71 60 x 90 x 80 1,61 180 x 40 x 45 x 82 9,23 140 x 180 x 40 x 45 x 82 7,11 36 65 x 100 x 90 2,24 65 x 100 x 90 2,13 200 x 45 x 49 x 92 13,28 150 x 220 x 50 x 49 x 92 11,33 40 70 x 115 x 100 2,91 70 x 115 x 100 2,70 220 x 45 x 54 x 100 15,49 160 x 250 x 60 x 54 x 100 17,15 47 80 x 135 x 110 4,08 80 x 135 x 110 3,79 260 x 50 x 64 x 110 24,38 200 x 280 x 60 x 64 x 110 19,98 57 --- --- --- --- --- --- --- --- 65 --- --- --- --- --- --- --- --- QR-Platte QR-plate Muffe, Standard coupler, standard Haltemutter fix nut WR 2074 - WR 3003 - WR 5005 - a x b x c x d 1 [kg] d x L [kg] SW x L x d [kg] 18 --- --- 36 x 100 0,56 30 x 22 0,08 26,5 130 x 120 x 30 x 39 x 72 2,14 50 x 170 1,73 36 x 22 0,08 32 165 x 140 x 35 x 45 x 82 3,42 60 x 200 2,91 41 x 22 0,09 36 180 x 160 x 40 x 49 x 93 4,77 68 x 210 3,98 46 x 25 0,12 40 195 x 180 x 45 x 54 x 100 6,70 70 x 245 4,59 50 x 25 0,13 47 --- --- 83 x 270 9,45 60 x 30 0,22 57 --- --- 95 x 240 7,76 85 x 40 x 90 0,99 S 555/700 63,5 mm / grade 80 65 --- --- 105 x 260 9,82 90 x 40 x 102 1,03 75 --- --- 114 x 290 9,97 105 x 50 x 114 1,82 Seite 3 / Page 3
Zubehör / accessories Spann-Verankerung stressing-anchorage Spannmuffe stressing-coupler WR 8002 - WR 8003 - SW x L x d 1 [kg] d 1 x L [kg] 18 41 x 80 x 45 x 65 0,91 45 x 100 1,00 26,5 46 x 100 x 50 x 70 1,21 45 x 150 1,06 32 50 x 120 x 56 x 70 1,39 53 x 180 1,77 36 55 x 140 x 60 x 80 1,99 58 x 200 1,97 40 55 x 150 x 65 x 80 2,16 65 x 220 3,18 47 65 x 170 x 75 x 90 2,76 75 x 240 4,42 57 90 x 160 x 100 x 110 6,75 95 x 270 7,34 65 S 555/700 63,5100 mm x 180 / grade x 12080 9,53 108 x 290 12,39 75 105 x 200 x 133 12,28 120 x 320 18,10 Ankermutter, gerade Ankerplatte, gerade Ankermutter, ballig 30 Ankermutter, Konus 30 anchor nut, flat anchor plate, flat bull nose nut, 30 anchor plate, cone 30 WR 2002 - WR 2139 - WR 2963 - WR 1928 - SW x L x d [kg] a x c x d [kg] SW x L x d [kg] a x c x d 1 [kg] 18 41 x 60 0,54 120 x 20 x 25 2,20 41 x 60 0,54 120 x 20 x 25 x 35 2,18 26,5 46 x 80 0,73 150 x 35 x 32 5,97 46 x 80 0,76 150 x 35 x 32 x 45 5,95 32 55 x 90 1,17 180 x 40 x 38 10,36 55 x 90 1,20 180 x 40 x 38 x 50 9,81 36 60 x 110 1,63 200 x 45 x 45 13,57 60 x 110 1,75 200 x 45 x 45 x 60 13,55 40 70 x 120 2,56 220 x 45 x 50 16,40 70 x 120 2,49 220 x 45 x 50 x 70 16,36 47 80 x 140 3,65 240 x 55 x 58 23,36 80 x 140 4,00 240 x 55 x 58 x 80 23,50 57 90 x 120 x 95 3,72 285 x 65 x 70 39,48 90 x 120 x 95 3,95 285 x 65 x 70 x 90 39,30 65 100 x 130 x 105 4,75 325 x 70 x 78 55,50 100 x 130 x 105 4,90 325 x 70 x 78 x 110 55,25 75 105 x 145 x 114 5,57 370 x 80 x 88 82,00 105 x 145 x 114 6,10 370 x 80 x 88 x 120 82,00 Seite 4 / Page 4
Zubehör / accessories Sechskantmuffe hexagonal coupler Muffe EP, Standard coupler EP, standard Sechskantmuffe EP hexagonal coupler EP WR 3009 - WR 3003 - EP WR 3009 - EP SW x L [kg] d x L [kg] SW x L [kg] 18 36 x 100 0,63 36 x 120 0,68 41 x 120 1,10 26,5 50 x 170 1,98 52 x 185 2,13 55 x 185 2,79 32 60 x 200 3,37 65 x 220 4,11 65 x 220 4,61 36 70 x 210 4,46 70 x 240 4,95 70 x 240 5,60 40 70 x 245 5,27 76 x 240 6,29 70 x 265 5,99 47 --- --- 89 x 310 10,34 --- --- 57 S 555/700 ---63,5 mm / grade 80 --- --- --- --- --- 65 --- --- --- --- --- --- 75 --- --- --- --- --- --- Ankermutter EP, gerade bull nose nut EP, flat Ankermutter EP, ballig 30 bull nose nut EP, 30 Haltemutter EP fix nut EP WR 2002 - EP WR 2963 - EP WR 5005 - EP SW x L [kg] SW x L [kg] SW x L [kg] 18 41 x 70 0,62 41 x 70 0,58 32 x 22 0,09 26,5 46 x 90 0,81 46 x 90 0,82 36 x 22 0,10 32 55 x 100 1,30 55 x 100 1,32 41 x 22 0,11 36 60 x 120 1,75 60 x 120 1,82 46 x 25 0,15 40 70 x 130 2,77 70 x 130 2,75 50 x 25 0,16 47 80 x 150 3,92 80 x 150 3,95 60 x 30 0,30 57 --- --- --- --- --- --- 65 --- --- --- --- --- --- 75 --- --- --- --- --- --- Seite 5 / Page 5
SAS Glattstäbe / SAS smooth bars 32, 36 mm, glatt / smooth SAS Spannstabstahl rund, glatt SAS stress bars round, smooth d 32 36 c 3 3 f p0,1k / f pk / A 1) 10 950 N/mm² /1050 N/mm² / 7 % A [mm²] 804 1018 G [kg/m] 6,31 7,99 1) Bruchdehnung bezogen auf den 10-fachen Stabdurchmesser ultimate elongation in a gauge length to 10 bar diameters Zubehör / accessories Kugelbundmutter, 55 domed nut, 55 Kugelbundmutter, 55 mit Verpressnuten domed nut, 55 with grout slots Ankerplatte, quadratisch, 55 anchor plate, square, 55 Ankerplatte, rechteckig, 55 anchor plate, rectangular, 55 WS 2001 - WS 2099 - WS 2011 - WS 2012 - SW x L x d [kg] SW x L x d [kg] a x c x d 1 [kg] a x b x c x d 1 [kg] 32 55 x 46 x 72 0,78 55 x 46 x 72 0,74 180 x 40 x 45 x 72 9,50 140 x 180 x 40 x 45 x 72 7,24 36 65 x 60 x 90 1,55 65 x 60 x 90 1,41 200 x 45 x 49 x 92 12,95 150 x 220 x 50 x 49 x 92 11,70 Muffe, Standard Übergangsmuffe Ankermutter, gerade Spann-Muffe für WS coupler, standard transition coupler anchor nut, flat stressing-coupler for WS WS 3003 - WS 3004 - WS 2002 - WS 8004 - d x L [kg] d x L [kg] SW x L [kg] d x L [kg] 32 60 x 110 1,74 60 x 200 2,94 55 x 46 0,71 60 x 190 2,79 36 68 x 160 3,25 68 x 235 4,47 60 x 65 0,96 70 x 245 4,64 Seite 6 / Page 6
SAS Gewindestäbe / SAS thread bars DIBt Zulassung ETA Zulassung DIBt Zulassung DIBt Zulassung Streckgrenze / Zugfestigkeit yield stress / ultimate stress Anwendungsbereiche areas of application Nenn-ø nom.-ø Strecklast yield load Bruchlast ultimate load Fläche cross section area Gewicht weight Dehnung elongation [N/mm 2 ] [kn] [kn] [mm 2 ] [m/to] [kg/m] [%] [%] SAS 500 (BSt 500 S) / grade 75 B 500 / 550 Bewehrungstechnik reinforcing systems Geotechnik geotechnical systems S 555 / 700 / grade 80 SAS 450 / grade 60 S 450 / 700 Bergbau mining SAS 650 / grade 90 S 650 / 800 Bergbau mining SAS 670 / grade 97 S 670 / 800 Geotechnik geotechnical systems Ankertechnik tunneling / mining SAS 950 / 1050 / grade 150 St 950 / 1050 Spanntechnik post-tensioning systems St 950 / 1050 St 835 / 1035 SAS 900 / 1100 Type FA / grade 160 St 900 / 1100 Type FA Schalungstechnik formwork ties schweißbar / weldable Type E S 850 Type FS Schalungstechnik formwork ties schweißbar / weldable 12 14 16 20 25 28 32 40 50 63,5 16 25 22 25 28 30 18 22 25 28 30 35 43 57,5 63,5 75 15 20 26,5 15 20 26,5 57 77 100 160 245 310 405 630 980 1760 93 220 247 319 400 460 170 255 329 413 474 645 973 1740 2122 2960 159 283 525 142 245 385 62 85 110 175 270 340 440 690 1080 2215 145 345 304 393 493 565 204 304 393 493 565 770 1162 2077 2534 3535 195 345 580 165 285 490 113 154 201 314 491 616 804 1260 1960 3167 207 491 380 491 616 707 254 380 491 616 707 962 1452 2597 3167 4418 177 314 551 189 326 586 617,3 259,7 335,6 259,7 207,0 180,2 500,0 335,6 259,7 207,0 180,2 132,5 87,7 49,1 40,2 28,8 694,4 390,6 223,2 675,7 390,6 217,4 0,89 1,21 1,58 2,47 3,85 4,83 6,31 9,87 15,40 24,86 40,2 Alternativ SAS 550 (BSt 550 S) erhältlich / alternative SAS 550 (BSt 550 S) grade 75 available 18 26,5 32 36 40 47 57 65 75 kaltgerollt SAS 850 / cold rolled grade 120 230 525 760 960 1190 1650 2155 2780 3690 255 580 845 1070 1320 1820 2671 3447 4572 241 551 804 1020 1257 1735 2581 3331 4418 1123,6 826,4 632,9 404,9 259,7 207,0 158,5 101,3 64,9 510,2 223,2 153,1 120,9 97,9 70,9 47,7 36,9 27,9 1,62 3,85 2,98 3,85 4,83 5,55 2,00 2,98 3,85 4,83 5,55 7,55 11,40 20,38 24,86 34,68 1,96 4,48 6,53 8,27 10,21 14,10 20,95 27,10 35,90 1,44 2,56 Agt A10 6 10 5 15 20 (A5) 18 (A5) 5 10 5 7 5 7 4 7 neu new 3 7 4,48 5 7 1,48 2,56 4,60 2 5,5 neu new Zubehör für alle Abmessungen und Anwendungen lieferbar / accessories for all dimensions and applications available Stand 09/2011 Technische Änderungen vorbehalten