Multi TOPLED LSG T67, LSP T67, LSY T67, LOP T67, LYG T67 Non-RoHS compliant version of product will be discontinued acc. to OS-PD-2-. The product itself will remain within RoHS compliant version. Besondere Merkmale Gehäusetyp: weißes P-LCC-4 Gehäuse, farbloser klarer Verguss Besonderheit des Bauteils: beide Leuchtdiodenchips getrennt ansteuerbar, hohe Signalwirkung durch Farbwechsel der LED möglich Wellenlänge: 628 nm (super-rot), 66 nm (orange), 9 nm (gelb), 7 nm (grün), 6 nm (pure green) Abstrahlwinkel: Lambertscher Strahler (12 ) Technologie: GaAlP (super-rot, orange, gelb, grün), GaP (pure green) optischer Wirkungsgrad: 1, lm/w (super-rot, orange, gelb), 2, lm/w (grün),,6 lm/w (pure green) Gruppierungsparameter: Lichtstärke Verarbeitungsmethode: für alle SMT-Bestücktechniken geeignet Lötmethode: IR Reflow Löten und Wellenlöten (TTW) Vorbehandlung: nach JEDEC Level 2 Gurtung: 8-mm Gurt mit 2/Rolle, ø18 mm oder 8/Rolle, ø33 mm Anwendungen Informationsanzeigen im Innen- und Außenbereich optischer Indikator Hinterleuchtung (Schalter, Tasten, Displays, Werbebeleuchtung, Allgemeinbeleuchtung) Innenbeleuchtung im Automobilbereich (z. B. Instrumentenbeleuchtung) Markierungsbeleuchtung (z.b. Stufen, Fluchtwege, u.ä.) Einkopplung in Lichtleiter Laufschriftanzeigen Signal- und Symbolleuchten Features package: white P-LCC-4 package, colorless clear resin feature of the device: both chips can be controlled separately, high signal efficiency possible by color change of the LED wavelength: 628 nm (super-red), 66 nm (orange), 9 nm (yellow), 7 nm (green), 6 nm (pure green) viewing angle: Lambertian Emitter (12 ) technology: GaAlP (super-red, orange, yellow, green), GaP (pure green) optical efficiency: 1. lm/w (super-red, orange, yellow), 2. lm/w (green),.6 lm/w (pure green) grouping parameter: luminous intensity assembly methods: suitable for all SMT assembly methods soldering methods: IR reflow soldering and TTW soldering preconditioning: acc. to JEDEC Level 2 taping: 8 mm tape with 2/reel, ø18 mm or 8/reel, ø33 mm Applications indoor and outdoor displays optical indicators backlighting (switches, keys, displays, illuminated advertising, general lighting) interior automotive lighting (e.g. dashboard backlighting) marker lights (e.g. steps, exit ways, etc.) coupling into light guides light writing displays signal and symbol luminaire 2-4- 1
Bestellinformation Ordering Information Typ Emissionsfarbe 1) Seite 1 Lichtstärke Bestellnummer Type Color of Emission 1) page 1 Luminous Intensity I F = 1 ma I V (mcd) color 1 color 2 Anm.: Streuung der Lichtstärke in einer Verpackungseinheit I V max / I V min 2. Streuung der Lichtstärke in einer LED I V max / I V min 3. (LSG T67, LSY T67), 4. (LSP T67, LOP T67) Ordering Code LSG T67-HL-1+HL-1 super-red / green 2.8... 18. 2.8... 18. Q6273Q4316 LSP T67-HK-1+GK-1 super-red / pure green 2.8... 11.2 1.8... 11.2 Q6273Q4318 LSY T67-JL-1+JL-1 super-red / yellow 4.... 18. 4.... 18. Q6273Q4317 LOP T67-JK-1+GJ-1 orange / pure green 4.... 11.2 1.8... 7.1 Q611A466 LYG T67-JL-1+JL-1 yellow / green 4.... 18. 4.... 18. Q6273Q42 Note: Luminous intensity ratio in one packaging unit I V max / I V min 2. Luminous intensity ratio in one LED I V max / I V min 3. (LSG T67, LSY T67), 4. (LSP T67, LOP T67) 2-4- 2
Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Betriebstemperatur Operating temperature range Lagertemperatur Storage temperature range Sperrschichttemperatur Junction temperature Durchlassstrom Forward current (T A =2 C) Stoßstrom Surge current t 1 µs, D =., T A =2 C 2) Seite 1 Sperrspannung 2) page 1 Reverse voltage (T A =2 C) Leistungsaufnahme Power consumption (T A =2 C) Wärmewiderstand Thermal resistance Sperrschicht / Umgebung 3) page 1 Junction / air 2 Sperrschicht / Lötpad Junction / solder point 3) Seite 1 1 chip on chips on 1 chip on 2 chips on super red orange yellow green pure green T op 4 + 1 C T stg 4 + 1 C T j + 1 C I F 3 ma I FM. A V R 12 V P tot 9 9 mw R th JA R th JA R th JS R th JS 48 6 26 43 K/W K/W K/W K/W 2-4- 3
Kennwerte Characteristics (T A = 2 C) Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Wellenlänge des emittierten Lichtes Wavelength at peak emission I F = 1 ma 4) Seite 1 Dominantwellenlänge 4) page 1 Dominant wavelength I F = 1 ma Spektrale Bandbreite bei % I rel max Spectral bandwidth at % I rel max I F = 1 ma (typ.) (typ.) super red orange yellow green pure green λ peak 63 61 86 72 7 nm λ dom 628 ± 6 66 ± 6 9 ± 6 7 ± 6 6 ± 6 nm λ 4 4 4 2 22 nm Abstrahlwinkel bei % I V (Vollwinkel) (typ.) 2ϕ 12 12 12 12 12 Grad Viewing angle at % I V deg. ) Seite 1 Durchlassspannung (typ.) ) page 1 Forward voltage (max.) I F = 1 ma Sperrstrom (typ.) Reverse current (max.) V R = 12 V Temperaturkoeffizient von λ peak Temperature coefficient of λ peak I F = 1 ma; 1 C T 1 C Temperaturkoeffizient von λ dom Temperature coefficient of λ dom I F = 1 ma; 1 C T 1 C Temperaturkoeffizient vonv F Temperature coefficient of V F I F = 1 ma; 1 C T 1 C Optischer Wirkungsgrad Optical efficiency I F = 1 ma (typ.) (typ.) (typ.) (typ.) V F 2. V F 2. I R.1 I R 1 2. 2..1 1 2. 2..1 1 2. 2..1 1 2. 2..1 1 V V µa µa TC λpeak.11.12.1.11.11 nm/k TC λdom.7.7.7.7. nm/k TC V -1.9-1.9-1.9-1.4-2.1 mv/k η opt 1. 1. 1. 2..6 lm/w 2-4- 4
Helligkeits-Gruppierungsschema Brightness Groups Helligkeitsgruppe Brightness Group 1) Seite 1 Lichtstärke 1) page 1 Luminous Intensity 6) Seite 1 Lichtstrom 6) page 1 Luminous Flux G H J K L I V (mcd) 1.8... 2.8 2.8... 4. 4.... 7.1 7.1... 11.2 11.2... 18. Φ V (mlm) 7 (typ.) 11 (typ.) 17 (typ.) 27 (typ.) 3 (typ.) Anm.: Die Standardlieferform von Serientypen beinhaltet eine Familiengruppe. Einzelne Helligkeitsgruppen sind nicht bestellbar. Note: The standard shipping format for serial types includes a family group. Individual brightness groups cannot be ordered. Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: J-1+K-1 Example: J-1+K-1 Helligkeitsgruppe Wellenlänge (keine Gruppierung) Helligkeitsgruppe Wellenlänge (keine Gruppierung) Brightness Group Wavelength (no grouping) Brightness Group Wavelength (no grouping) (yellow) (yellow) (green) (green) J 1 K 1 Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Helligkeitsgruppe pro Farbe enthalten. Note: No packing unit / tape ever contains more than one brightness group per color. 2-4-
6) Seite 1 Relative spektrale Emission 6) page 1 Relative Spectral Emission V(λ) = spektrale Augenempfindlichkeit / Standard eye response curve I rel = f (λ); T A = 2 C; I F = 1 ma 1 OHL1697 I rel % 8 V λ 6 4 pure-green yellow orange super-red 2 green 4 4 6 6 7 nm λ 6) Seite 1 Abstrahlcharakteristik 6) page 1 Radiation Characteristic I rel = f (ϕ); T A = 2 C 4 3 2 1 OHL166 ϕ 1..8 6 7 8 9.6.4.2 1 1..8.6.4 2 4 6 8 1 12 2-4- 6
6) 7) Seite 1 Durchlassstrom 6) 7) page 1 Forward Current I F = f (V F ); T A = 2 C 1 2 OHL214 6) 7) Seite 1 Relative Lichtstärke Relative Luminous Intensity I V /I V(1 ma) = f (I F ); T A = 2 C 1 1 6) 7) page 1 OHL2146 I F ma 1 1 1 pure-green super-red orange/yellow green 1-1 1. 1.4 1.8 2.2 2.6 3. V 3.4 V F Ι Ι V V (1 ma) 1 1-1 1-2 1-3 1-1 green red yellow super-red orange pure-green 6) Seite 1 Relative Lichtstärke Relative Luminous Intensity I V /I V(2 C) = f (T j ); I F = 1 ma I V I V (2 C) 2. 1.6 1 1 1 ma 1 2 6) page 1 Ι F OHL21 1.2 yellow green.8 orange super-red.4 pure-green. 2 4 6 8 C 1 T j 2-4- 7
Maximal zulässiger Durchlassstrom Max. Permissible Forward Current I F = f (T) I F 3 ma 3 2 2 2 chips on 1 chip on OHL241 Maximal zulässiger Durchlassstrom Max. Permissible Forward Current I F = f (T) I F 3 3 2 2 2 chips on 1 chip on OHL96 1 1 1 1 T A temp. ambient 2 4 6 8 C 1 T Zulässige Impulsbelastbarkeit I F = f (t p ) Permissible Pulse Handling Capability Duty cycle D = parameter, T A = 2 C I F 1 3 ma t P D = T t P D =..1.2..1 T OHL1686 I F T S temp. solder point 2 4 6 8 C 1 T 1 2.2. DC 1 1 1-1 -4 1-3 1-2 1-1 1 s 1 1 t p 2-4- 8
8) Seite 1 Maßzeichnung 8) page 1 Package Outlines 3.4 (.134) 3. (.118) Package marking 3. (.118) 2.6 (.12) 2.3 (.91) 2.1 (.83).8 (.31).6 (.24) 2 3 1 4 (2.4 (.94)) 3.7 (.146) 3.3 (.13) 4 ±1.1 (.4) typ 1.1 (.43). (.2) 2.1 (.83) 1.7 (.67).9 (.3).7 (.28).18 (.7).12 (.).6 (.24).4 (.16) A C C A Circuit Diagram GPLY6837 L Color 1 Color 2 T67 LED Emission color 1 Emission color 2 Package Cathode: pin 1 Cathode: pin 3 Kathodenkennung: Cathode mark: Gewicht / Approx. weight: abgeschrägte Ecke bevelled edge 3 mg 8) Seite 1 Gurtung / Polarität und Lage Verpackungseinheit 8) page 1 Method of Taping / Polarity and Orientation Packing 2/Rolle, ø18 mm oder 8/Rolle, ø33 mm unit 2/reel, ø18 mm or 8/reel, ø33 mm 1. (.9) 4 (.17) 2 (.79) 2.9 (.114) 4 (.17) 3.6 (.142) 3. (.138) 1.7 (.69) 8 (.31) A C C A OHAY93 2-4- 9
8) Seite 1 Empfohlenes Lötpaddesign IR 8) page 1 Recommended Solder Pad IR Reflow Löten Reflow Soldering 2.6 (.12) 3.3 (.13) 3.3 (.13).4 (.16) 1.1 (.43) 4. (.177) 1. (.9). (.2) 7. (.29) Padgeometrie für verbesserte Wärmeableitung Paddesign for improved heat dissipation 8) Seite 1 Empfohlenes Lötpaddesign Wellenlöten 8) page 1 Recommended Solder Pad TTW Kathoden Markierung / Cu Fläche / 12 mm 2 per pad Cathode marking Cu-area Lötstoplack Solder resist (TTW) Soldering _< OHLPY439 6 (.236) 3 (.118) 2 (.79) 2 (.79) 6.1 (.24) 2.8 (.11) 8 (.31) 3. (.138) 1 (.39) 3. (.138) 2 (.79) 1. (.9) Bewegungsrichtung der Platine PCB-direction 2.8 (.11). (.2) Padgeometrie für 7. (.29) verbesserte Wärmeableitung Paddesign for Cu Fläche / > 12 mm 2 per pad improved heat dissipation Cu-area Lötstoplack Solder resist OHAY83 2-4- 1
Lötbedingungen Vorbehandlung nach JEDEC Level 2 Soldering Conditions Preconditioning acc. to JEDEC Level 2 IR-Reflow Lötprofil (nach IPC 91) IR Reflow Soldering Profile (acc. to IPC 91) 3 C OHLY97 T 2 24-24 C 1-4 s 2 1 12 to 18 s 183 C ramp-down rate up to 6 K/s 1 ramp-up rate up to 6 K/s defined for Preconditioning: 2-3 K/s defined for Preconditioning: up to 6 K/s 1 1 2 s 2 t Wellenlöten (TTW) (nach CECC 82) TTW Soldering (acc. to CECC 82) T 3 C 2 2 23 C... 26 C 1. Welle 1. wave 1 s 2. Welle 2. wave Normalkurve standard curve Grenzkurven limit curves OHLY98 1 ca 2 K/s K/s 2 K/s 1 1 C... 13 C 2 K/s Zwangskühlung forced cooling 1 1 2 s 2 t 2-4- 11
Barcode-Produkt-Etikett (BPL) Barcode-Product-Label (BPL) Gurtverpackung Tape and Reel OSRAM Opto Semiconductors (6P) BATCH NO: Batch Number Bar Code (1T) LOT NO: Lot Number Bar Code (X) PROD NO: Product Code (9D) D/C: Date Code (Q)QTY: Product Quantity per Reel Bar Code Lx xxxx Bin1: Bin Information Color 1 Bin2: Product Name Bin3: ML 2 2 Temp ST 24 C R 26 C T (G) GROUP: X - X - X Sample Additional TEXT R77 DEMY PACKVAR: Packing Type Forward Voltage Rank Wavelength Rank Brightness Rank OHA243 W 1 D P P 2 F E W A N 13. ±.2 P 1 Label Direction of unreeling W 2 Direction of unreeling Gurtvorlauf: Leader: Gurtende: Trailer: 4 mm 4 mm 16 mm 16 mm OHAY324 Tape dimensions in mm (inch) W P P 1 P 2 D E F 8 +.3.1 4 ±.1 (.17 ±.4) 4 ±.1 (.17 ±.4) 2 ±. (.79 ±.2) 1. +.1 (.9 +.4) 1.7 ±.1 (.69 ±.4) 3. ±. (.138 ±.2) Reel dimensions in mm (inch) A W N min W 1 W 2 max 18 (7) 8 (.31) 6 (2.362) 8.4 + 2 (.331 +.79) 14.4 (.67) 33 (13) 8 (.31) 6 (2.362) 8.4 + 2 (.331 +.79) 14.4 (.67) 2-4- 12
_< C). _< _< C). 11 (9D) D/C: 144 _< Bin3: ML Temp ST 2 22 C R 2a 3 24 C R 26 C RT R77 PACKVAR: 11 Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. LSG T67, LSP T67, LSY T67, LOP T67, LYG T67 Trockenverpackung und Materialien Dry Packing Process and Materials OSRAM Moisture-sensitive label or print Barcode label Humidity indicator Barcode label Comparator check dot % 1% If wet, parts still adequately dry. change desiccant If wet, examine units, if necessary bake units If wet, 1% examine units, if necessary bake units WET R18 DEMY (9D) D/C: 144 Bin3: ML Temp ST 2 22 C R 2a 3 24 C R 26 C RT R18 DEMY CAUTION LEVEL If blank, see bar code label This bag contains MOISTURE SENSITIVE OPTO SEMICONDUCTORS 1. Shelf life in sealed bag: 24 months at < 4 C and < 9% relative humidity (RH). 2. After this bag is opened, devices that will be subjected to infrared reflow, vapor-phase reflow, or equivalent processing (peak package body temp. If blank, see bar code label a) Mounted within at factory conditions of 3 C/6% RH. Floor time see below b) Stored at 1% RH. 3. Devices require baking, before mounting, if: a) Humidity Indicator Card is > 1% when read at 23 C ± C, or b) 2a or 2b is not met. 4. If baking is required, reference IPC/JEDEC J-STD-33 for bake procedure. Bag seal date (if blank, seal date is identical with date code). Date and time opened: Moisture Level 1 Floor time > 1 Year Moisture Level 4 Floor time 72 Hours Moisture Level 2 Floor time 1 Year Moisture Level Floor time 48 Hours Moisture Level 2a Floor time 4 Weeks Moisture Level a Floor time 24 Hours Moisture Level 3 Floor time 168 Hours Moisture Level 6 Floor time 6 Hours Desiccant Humidity Indicator MIL-I-883 OSRAM OHA39 Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte Bezüglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel Gurtung und Verpackung unter dem Punkt Trockenverpackung. Hier sind Normenbezüge, unter anderem ein Auszug der JEDEC-Norm, enthalten. Note: Moisture-senisitve product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter Tape and Reel under the topic Dry Pack. Here you will also find the normative references like JEDEC. Kartonverpackung und Materialien Transportation Packing and Materials Barcode label CAUTION LEVEL This bag contains MOISTURE SENSITIVE OPTO SEMICONDUCTORS 1. Shelf life in sealed bag: 24 months at < 4 C and < 9% relative humidity (RH). 2. After this bag is opened, devices that will be subjected to infrared reflow, vapor-phase reflow, or equivalent processing (peak package body temp. If blank, see bar code label a) Mounted within at factory conditions of 3 C/6% RH. Floor time see below b) Stored at 1% RH. 3. Devices require baking, before mounting, if: a) Humidity Indicator Card is > 1% when read at 23 C ± C, or b) 2a or 2b is not met. 4. If baking is required, reference IPC/JEDEC J-STD-33 for bake procedure. Bag seal date (if blank, seal date is identical with date code). Date and time opened: Moisture Level 1 Floor time > 1 Year Moisture Level 4 Floor time 72 Hours Moisture Level 2 Floor time 1 Year Moisture Level Floor time 48 Hours Moisture Level 2a Floor time 4 Weeks Moisture Level a Floor time 24 Hours Moisture Level 3 Floor time 168 Hours Moisture Level 6 Floor time 6 Hours If blank, see bar code label OSRAM Opto Semiconductors (6P) BATCH NO: (1T) LOT NO: 2121998 123GH1234 Muster (X) PROD NO: 1 42 (Q)QTY: 2 LSY T676 Multi TOPLED Bin1: P-1-2 Bin2: Q-1-2 Additional TEXT R77 PACKVAR: (G) GROUP: P-1+Q-1 Barcode label OSRAM Opto Semiconductors (6P) BATCH NO: (1T) LOT NO: 2121998 123GH1234 Muster (X) PROD NO: 1 LSY T676 Multi TOPLED 42 (Q)QTY: 2 Bin1: P-1-2 Bin2: Q-1-2 Additional TEXT (G) GROUP: P-1+Q-1 OSRAM Packing Sealing label OHA244 2-4- 13
Revision History: 2-4- Previous Version: 24-8-13 Page Subjects (major changes since last revision) Date of change 3 note changed 3 luminous Intensity of LOP T67 for pure green dominant wavelength (yellow) 13 graphic (taping) value (wavelength yellow) 14 annotations 22-7-23 4, value (reverse voltage from V to 12 V) 22-9-18 3 ambient temperature 23-9-9 all new template 24-3-11 all Discontinuation of non-rohs compliant product versions 2-4- Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 9) page 1 may only be used in life-support devices or systems 1) page 1 with the express written approval of OSRAM OS. 2-4- 14
Fußnoten: 1) Helligkeitswerte werden mit einer Stromeinprägedauer von 2 ms und einer Genauigkeit von ± 11% ermittelt. 2) Die LED kann kurzzeitig in Sperrichtung betrieben werden. 3) R thja ergibt sich bei Montage auf PC-Board FR 4 (Padgröße 16 mm 2 je Pad) 4) Wellenlängen werden mit einer Stromeinprägedauer von 2 ms und einer Genauigkeit von ±1 nm ermittelt. ) Spannungswerte werden mit einer Stromeinprägedauer von 1 ms und einer Genauigkeit von ±,1 V ermittelt. 6) Wegen der besonderen Prozessbedingungen bei der Herstellung von LED können typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes überein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden können. Falls erforderlich, z.b. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankündigung geändert. 7) Im gestrichelten Bereich der Kennlinien muss mit erhöhten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden. 8) Maße werden wie folgt angegeben: mm (inch) 9) 1) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems führen wird oder die Sicherheit oder Effektivität dieses Apparates oder Systems beeinträchtigt. Lebenserhaltende Apparate oder Systeme sind für (a) die Implantierung in den menschlichen Körper oder (b) für die Lebenserhaltung bestimmt. Falls sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. Remarks: 1) Brightness groups are tested at a current pulse duration of 2 ms and a tolerance of ± 11%. 2) Driving the LED in reverse direction is suitable for short term application. 3) R thja results from mounting on PC board FR 4 (pad size 16 mm 2 per pad) 4) Wavelengths are tested at a current pulse duration of 2 ms and a tolerance of ±1 nm. ) Forward voltages are tested at a current pulse duration of 1 ms and a tolerance of ±.1 V. 6) 7) Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit. 8) Dimensions are specified as follows: mm (inch) 9) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 1) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered. Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-9349 Regensburg www.osram-os.com All Rights Reserved. 2-4- 1