ANLEITUNG FÜR EINBAU, BEDIENUNG UND WARTUNG KESSEL - Badablauf Classic Auslauf seitlich DN 50 Best.Nr. 40 150.20 Produktvorteile Drehbares und um 50 mm stufenlos höhenverstellbares Aufsatzstück Optimale Rohrreinigung durch Herausnehmen des Geruchverschlusses Geruchverschluß selbstreinigend Niedrige Bauhöhe mit fixierter Lippendichtung für den sicheren Einbau Dehnfuge zwischen Endbelag und Aufsatzstück legen. Änderungsstand: 10/2013 Sachnummer: 084-110
Produktbeschreibung min. 10 max.60 Minimale Einbauhöhe 95 mm Aussparungsmaße 220 x 180 mm Aufsatzstück drehbar, stufenlos hö hen - verstellbar um 50 mm. Auf Bodenniveau anpassbar, minimale Einbauhöhe durch Absägen Herausnehmbarer Geruchverschluss Grundkörper Ausbaufähig und kombinierbar mit Ergänzungsbauteilen (siehe Rückseite)
Einbau- und Montagetipps Aufsatzstück drehbar, stufenlos höhenverstellbar ohne Absägen Flexibler Niveauausgleich zwischen Aufsatzstück und Grundkörper Minimale Einbauhöhe durch Absägen Bei vertieftem Einbau Verlängerungsstück Best. Nr. 27146 zwischen Grundkörper und Aufsatzstück anbringen. Systemzubehör für erweiterte Einbaumöglichkeiten siehe Rückseite. Reinigung Nach Abnehmen des Rostes und Her aus - neh men des Geruchverschlusses durch Kip pen ist eine optimale Rohrreinigung möglich.
Einbauvorschlag Abb. zeigt Best.Nr. 40150.20 + 27199 KESSEL-Bodenablauf aus Kunststoff Geruchverschluss Zwischenstück mit Klebeflansch und Gegenflansch Systemzubehör für erweiterte Einbaumöglichkeiten siehe Rückseite.
Systemzubehör Schemadarstellung des kompletten Baukastensystems. Grundkörper aus ABS 40150 DN 50, Auslauf seitlich mit Geruchverschluss Geruchverschluss aus PP 47200 50 mm Sperrwasserhöhe Geruchverschluss aus ABS 47100 25 mm Sperrwasserhöhe Verlängerungsstück aus ABS 27146 mit Lippendichtung Klebeflansch aus ABS 43401 mit Gegenflansch Flanschbreite 100 mm Abdichtungsbahn 43710 aus PVC 500 x 500 mm Abdichtungsbahn 43730 aus EPDM 500 x 500 mm Zwischenstück aus ABS 27199 mit Klebeflansch und Gegenflansch Flanschbreite 100 mm Die KESSEL-Boden-/Bad- und Deckenablauf-Grundkörper und Auf satz - stücke aus Kunststoff sind mit denen aus Edelstahl Größe 1 kombinierbar. Bitte richten Sie Ihre Anfrage an unseren Verkauf. Zwischenstück aus PP 27198 mit Pressdichtungsflansch aus Edelstahl, Flanschbreite 63 mm Haltering aus HDPE 27167 zur Sickerwasserableitung Aufsatzstück aus ABS 27165 mit Schlitzrost 100 x 100 mm aus Edelstahl Aufsatzstück aus ABS 27193 mit Schlitzrost 150 x 150 mm aus ABS Aufsatzstück aus ABS 27191 mit Schlitzrost 150 x 150 mm aus Edelstahl verschraubt Lippendichtung 27148 für Zwischenstücke Variofix-Dünnbettaufsatz 47901 aus ABS mit Schlitzrost 100 x 100 mm aus Edelstahl Variofix-Dünnbettaufsatz 47902 aus ABS mit Schlitzrost 150 x 150 mm aus Edelstahl
Führend in Entwässerung 1 2 3 4 5 Öffentlicher Bau z.b. Krankenhaus 6 4 Privater Wohnungsbau ohne Kanalanbindung 1 2 3 4 5 Öffentlicher Bau z.b. Freizeitanlagen 4 5 Gewerblicher Bau z.b. Industriebau 1 2 3 4 5 Gewerblicher Bau z.b. Hotel 2 3 5 Gewerblicher Bau z.b. Tankstellen 1 2 3 4 Privater Wohnungsbau Ein- und Mehrfamilienhaus 1 Rückstauverschlüsse 2 Rückstauhebeanlagen 3 Hebeanlagen 4 Abläufe / Rinnen 5 Abscheider 6 Kleinkläranlagen
INSTRUCTIONS FOR INSTALLATION, OPERATION AND MAINTENANCE KESSEL - floor drain Classic side outlet DN 50 Order Nr. 40 150.20 Product advantages Attachment piece can be turned and continuously heightadjusted by up to 50 mm Optimum pipe cleaning by removal of odour trap Self-cleaning odour trap Low installation height With fixed lip seal for safe installation Place expansion joint between end cover and attachment piece. Edition: 10/2013 Number: 084-110
Product description min. 10 max.60 Minimum installation height 95 mm Recess dimensions 220 x 180 mm Attachment piece can be turned and continuously height-adjusted by up to 50 mm. Can be adapted to floor level, minimum installation height through sawing to size Removable odour trap Drain body Can be extended and combined with supplementary components (see revers)
Assembly tips Attachment piece can be turned and continuously heightadjusted Flexible level adjustment between attachment piece and drain body Minimum installation height by sawing the attachment piece as required During initial operation, make sure that the odour trap is completely filled with water. Please check the water level at regular intervals to avoid odour pollution! Cleaning Optimal pipe cleaning is possible by taking the cover off and removing the odour trap by tilting. When the odour trap is replaced, it must be completely filled with water.
Assembly proposal Polyethylene moisture barrier Slope Expansion joint Slope 1.5 cm Tiles 4 cm Screed Thermal/Sound insulation Screed (3 cm) Polyethylene moisture membrane Illustration shows 46700.20 + 27199 Dimensions in cm Concrete floor KESSEL floor drain, plastic Odour trap and counterflange Connection flange See next page for system accessories for additional installation possibilities.
System accessories Schematic representation of the whole modular system. Drain body made of PP 42701 DN 50, with side inlet DN 40 Lip seal 27148 for adapters Extension made of ABS 27146 with lip seal Adhesive flange made of ABS 43401 with counterflange Flange width 100 mm PVC sealing sheet 43710 500 x 500 mm EPDM sealing sheet 43730 500 x 500 mm ABS adapter 27199 with adhesive flange and counterflange, flange width 100 mm PP adapter 27198 with pressure sealing flange made of stainless steel, flange width 63 mm Supporting ring made of HDPE 27167 for discharging seepage water Attachment piece made of ABS 27193 with slotted cover, 150 x 150 mm ABS Attachment piece made of ABS 27191 with slotted cover, 150 x 150 mm made of stainless steel, screwed in place Attachment piece made of PA 27192 with clamping edge and white slotted cover Ø 120 mm made of plastic Variofix shallow bed attachment 47901 ABS, with slotted cover, 100 x 100 mm Variofix shallow bed attachment 47902 ABS, with slotted cover, 150 x 150 mm The KESSEL floor/bathroom and roof drains bodies and attachment pieces made of plastic can be combined with those made of stainless steel size 1. Please send your inquiry to our Sales department.
Leading in Drainage 1 2 3 4 5 Public buildings (e.g. hospital) 6 4 Private homes without public sewage connection 1 2 3 4 5 Public buildings (e.g. leisure facility) 4 5 Commercial buildings (e.g. industrial / manufacturing facilities) 1 2 3 4 5 Commercial buildings (e.g. hotel) 2 3 5 Commercial buildings (e.g. gas/petrol station) 1 2 3 4 Private homes/multifamily apartments/flats 1 Backwater valves 2 Wastewater Lifting system 3 Lifting stations 3 Lifting stations 5 Separators 6 Septic Systems