2016-09-02 OSLON Square Datasheet Version 1.3 Third generation of OSLON Square with improved radiation pattern and enhanced performance. Most compact high-power LED with well known superior robustness, high reliability, long lifetime and low thermal resistance. Die dritte Generation OSLON Square mit verbesserter Abstrahlcharakteristik und nochmals verbesserter Leistung. Die kompakte High-Power LEDs bietet erprobte Zuverlässigkeit und lange Lebensdauer bei niedrigstem Wärmewiderstand. Features: Besondere Merkmale: Package: SMT ceramic package with silicone resin Gehäusetyp: SMT-Keramikgehäuse mit and silicone lens Silikonverguss und -linse Viewing angle at 50 % I V : 120 Abstrahlwinkel bei 50 % I V : 120 Color: 3000 K - 6500 K (white) Farbe: 3000 K - 6500 K (weiß) CRI: min. 70 ( typ. 72 ) CRI: min. 70 ( typ. 72 ) Luminous Flux: typ. 307 lm @ 5000 K, 85 C Lichtstrom: typ. 307 lm @ 5000 K, 85 C Luminous efficacy: typ. 157 lm/w @ 5000 K, Lichtausbeute: typ. 157 lm/w @ 5000 K, 85 C 85 C Corrosion Robustness: Superior Corrosion Korrosionsstabilität: Höchste Robustness Korrosionsbeständigkeit Lumen Maintenance: Test results according to Lichtstromerhaltung: Testergebnisse nach IESNA LM-80 available IESNA LM-80 verfügbar Applications Industrial lighting Outdoor lighting Street and tunnel lighting Anwendungen Industriebeleuchtung Außenbeleuchtung Straßen und Tunnel 2016-09-02 1
Ordering Information Bestellinformation Type: Color Temperature Luminous Flux Ordering Code Typ: Farbtemperatur Lichtstrom Bestellnummer [K] 1) page 25 1) Seite 25 I F = 700 ma, T S = 85 C Φ V [lm] -MFN2-A737-1 3000 270... 300 Q65112A0212 -MFN2-XX57-1 3000 270... 300 Q65112A0209 -N1N3-A737-1 3000 280... 310 Q65112A2054 -N1N3-XX57-1 3000 280... 310 Q65112A2055 -MFN2-A636-1 3500 270... 300 Q65112A0213 -MFN2-XX56-1 3500 270... 300 Q65112A0210 -N1N3-A636-1 3500 280... 310 Q65112A0206 -N1N3-XX56-1 3500 280... 310 Q65112A0230 -N1N3-A535-1 4000 280... 310 Q65112A0207 -N1N3-XX55-1 4000 280... 310 Q65112A0205 -N2N4-A535-1 4000 290... 320 Q65112A0204 -N2N4-XX55-1 4000 290... 320 Q65112A0202 -N1N3-A434-1 4500 280... 310 Q65112A0208 -N1N3-XX54-1 4500 280... 310 Q65112A0221 -N2N4-A434-1 4500 290... 320 Q65112A0227 -N2N4-XX54-1 4500 290... 320 Q65112A0203 -N2N4-A333-1 5000 290... 320 Q65112A0219 -N2N4-XX53-1 5000 290... 320 Q65112A0229 -N3N5-A333-1 5000 300... 330 Q65112A0201 -N3N5-XX53-1 5000 300... 330 Q65112A0232 -N2N4-A232-1 5700 290... 320 Q65112A0220 -N2N4-XX52-1 5700 290... 320 Q65112A0218 -N3N5-A232-1 5700 300... 330 Q65112A0217 -N3N5-XX52-1 5700 300... 330 Q65112A0228 -N1N3-A131-1 6500 280... 310 Q65112A0234 -N1N3-XX51-1 6500 280... 310 Q65112A0233 -N2N4-A131-1 6500 290... 320 Q65112A0236 -N2N4-XX51-1 6500 290... 320 Q65112A0235 2016-09-02 2
Note: Anm.: The above Type Numbers represent the order groups which include only a few brightness groups (see page 7). Only one group will be shipped on each packing unit (there will be no mixing of two groups on each packing unit). E. g. -MFN2-XX57-1 means that only one group MF, N1, N2 will be shippable for any packing unit. In a similar manner for colors where color chromaticity coordinate groups are measured and binned, single groups will be shipped on any one packing unit. -MFN2-XX57-1 means that the device will be shipped within the specified limits. In a similar manner for colors where forward voltage groups are measured and binned, single forward voltage groups will be shipped on any packing unit. E. g. -MFN2-XX57-1 means that only one forward voltage group K2,L1,L2,M1,M2 will be shippable. Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 7). Es wird nur eine einzige Helligkeitsgruppe pro Verpackungseinheit geliefert. Z. B. -MFN2-XX57-1 bedeutet, dass in einer Verpackungseinheit nur eine der Helligkeitsgruppen MF, N1, N2 enhalten ist. Gleiches gilt für die Farben, bei denen Farbortgruppen gemessen und gruppiert werden. Pro Verpackungseinheit wird nur eine Farbortgruppe geliefert. Z.B. -MFN2-XX57-1 bedeutet, dass in einer Verpackungseinheit nur eine der Farbortgruppen enthalten ist. -MFN2-XX57-1 bedeutet, dass das Bauteil innerhalb der spezifizierten Grenzen geliefert wird. Gleiches gilt für die LEDs, bei denen die Durchlassspannungsgruppen gemessen und gruppiert werden. Pro Verpackungseinheit wird nur eine Durchlassspannungsgruppe geliefert. Z. B. -MFN2-XX57-1 bedeutet, dass nach Durchlassspannungsgruppen gruppiert wird. In einer Verpackungseinheit ist nur eine der Durchlassspannungsgruppen K2,L1,L2,M1,M2 enthalten (siehe Seite 7). 2016-09-02 3
Maximum Ratings Grenzwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Operating temperature range Betriebstemperatur Storage temperature range Lagertemperatur Junction temperature absolute * Sperrschichttemperatur absolut * Junction temperature Sperrschichttemperatur Forward current Durchlassstrom (T S = 85 C) Surge current Stoßstrom Reverse voltage Sperrspannung (T S = 85 C) Reverse current Sperrstrom 3) Seite 25 2) page 25 2) Seite 25 3) page 25 ESD withstand voltage ESD Festigkeit (acc. to ANSI/ESDA/JEDEC JS-001 - HBM, Class 3B) T op -40... 125 C T stg -40... 125 C T j, abs 150 C T j 135 C I F 200... 1800 ma I FM 2000 ma V R 1.2 V I R 200 ma V ESD 8 kv Note: Anm: * This is verified by testing 30 pieces. Pass criteria: No catastrophic failures allowed, luminous flux must be better than L70B50 after 1000 h. * Dieser Wert wird durch den Test von 30 Bauteilen abgesichert. Dabei dürfen keine Totalausfälle auftreten und der Lichtstrom muß nach 1000 h über L70B50 liegen. 2016-09-02 4
Characteristics (T S = 85 C; I F = 700 ma) Kennwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Viewing angle at 50 % I V (typ.) 2ϕ 120 Abstrahlwinkel bei 50 % I V Forward voltage Durchlassspannung Color rendering index Farbwiedergabe Index (3000K - 6500K) Real thermal resistance junction / solder point 4) page 25 Realer Wärmewiderstand Sperrschicht / Lötpad 4) Seite 25 (min.) (typ.) (max.) (typ.) (min.) (typ.) (max.) V F V F V F 2.70 2.80 3.20 R a 72 R a 70 R th JS real 3.6 R th JS real 4.5 V V V - - K/W K/W "Electrical" thermal resistance junction / solder point 4) page 25 "Elektrischer" Wärmewiderstand Sperrschicht / 4) Seite 25 Lötpad (with efficiency η e = 41 %) (typ.) (max.) R th JS el 2.1 R th JS el 2.7 K/W K/W Note: Anm.: Individual forward voltage groups see next page Durchlassspannungsgruppen siehe nächste Seite 2016-09-02 5
Brightness Groups Helligkeitsgruppen Group Luminous Flux Luminous Flux Luminous Intensity 1) Seite 25 1) page 25 1) Seite 25 1) page 25 Gruppe Lichtstrom Lichtstrom Lichtstärke (min.) Φ V [lm] (max.) Φ V [lm] (typ.) I V [cd] M9 260 270 84 MF 270 280 88 N1 280 290 91 NP 280 304 93 N2 290 300 94 N3 300 310 97 NQ 304 330 101 N4 310 320 100 N5 320 330 103 NR 330 359 110 5) page 25 5) Seite 25 Forward Voltage Groups Durchlassspannungsgruppen Group Gruppe (min.) V F [V] (max.) V F [V] K2 2.70 2.80 L1 2.80 2.90 L2 2.90 3.00 M1 3.00 3.10 M2 3.10 3.20 2016-09-02 6
Chromaticity Coordinate Groups 6) Seite 25 Farbortgruppen 6) page 25 2016-09-02 7
Color Chromaticity Groups 6) Seite 25 Farbortgruppen 6) page 25 2016-09-02 8
2016-09-02 9
Group Name on Label Gruppenbezeichnung auf Etikett Example: M9-31-K2 Beispiel: M9-31-K2 Brightness Helligkeit Chromaticity Coordinate Farbort M9 31 K2 Forward Voltage Durchlassspannung Note: Anm.: No packing unit / tape ever contains more than one group for each selection. In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe für jede Selektion enthalten. 2016-09-02 10
Relative Spectral Emission - V(λ) = Standard eye response curve Relative spektrale Emission - V(λ) = spektrale Augenempfindlichkeit Φ rel = f (λ); T S = 85 C; I F = 700 ma 5) page 25 5) Seite 25 1,0 E rel : V λ : white 0,8 0,6 0,4 0,2 0,0 350 400 450 500 550 600 650 700 750 800 λ [nm] Radiation Characteristics Abstrahlcharakteristik I rel = f (ϕ); T S = 85 C 5) page 25 5) Seite 25-20 -30-40 ϕ [ ] -10 0 10 20 30 40 50 60 70 80 90 1,0 Irel 0,8-50 -60 0,6-70 0,4-80 0,2-90 0,0-100 2016-09-02 11
Relative Luminous Flux 5) page 25, 7) page 25 5) page 25, 7) page 25 Forward Current Durchlassstrom 5) Seite 25, 7) Seite 25 5) Seite 25, 7) Seite 25 Relativer Lichtstrom I F = f (V F ); T S = 85 C Φ V /Φ V (700 ma) = f(i F ); T S = 85 C IF [ma] 1800 1600 Φ V Φ V (700mA) 2,2 2,0 1,8 1400 1,6 1200 1,4 1000 1,2 800 1,0 0,8 600 0,6 400 0,4 200 2,7 2,8 2,9 3,0 3,1 VF [V] 200 400 600 800 1000 1200 1400 1600 1800 I F [ma] Chromaticity Coordinate Shift 5) Seite 25 Farbortverschiebung ΔCx, ΔCy = f(i F ); T S = 85 C 5) page 25 Cx Cy 0,010 : Cx - white : Cy - white 0,005 0,000-0,005-0,010 200 400 600 800 1000 1200 1400 1600 1800 I F [ma] 2016-09-02 12
Relative Luminous Flux 5) page 25 5) page 25 Relative Forward Voltage Relative Vorwärtsspannung 5) Seite 25 5) Seite 25 Relativer Lichtstrom ΔV F = V F - V F (85 C) = f(t j ); I F = 700 ma Φ V /Φ V (85 C) = f(t j ); I F = 700 ma V F [V] 0,20 Φ v 1,2 Φ v (85 C) : white 1,0 0,15 0,8 0,10 0,6 0,05 0,4 0,00 0,2-40 -20 0 20 40 60 80 100 120 T j [ C] 0,0-40 -20 0 20 40 60 80 100 120 T j [ C] Chromaticity Coordinate Shift 5) Seite 25 Farbortverschiebung ΔCx, ΔCy = f(tj); I F = 700 ma 5) page 25 Cx Cy 0,02 : Cx - white : Cy - white 0,01 0,00-0,01-0,02-40 -20 0 20 40 60 80 100 120 T j [ C] 2016-09-02 13
Max. Permissible Forward Current Max. zulässiger Durchlassstrom I F = f (T) 2000 I F [ma] 1800 1600 1400 1200 1000 800 600 400 200 0 Do not use below 200 ma 0 20 40 60 80 100 120 T s [ C] 2016-09-02 14
Package Outline Maßzeichnung 8) page 25 8) Seite 25 Approximate Weight: Gewicht: Mark: Markierung: 29 mg 29 mg Cathode Kathode ESD information: ESD Information: LED is protected by ESD device which is connected in parallel to LED-Chip. Die LED enthält ein ESD-Bauteil, das parallel zum Chip geschaltet ist. Corrosion robustness: Test conditions: 40 C / 90 % rh / 15 ppm H 2 S / 336 h = Stricter than IEC 60068-2-43 (H 2 S) [25 C / 75 % rh / 10 ppm H 2 S / 21 days] = Regarding relevant gas (H 2 S) stricter than EN 60068-2-60 (method 4) [25 C / 75 % rh / 200 ppb SO 2, 200 ppb NO 2, 10 ppb Cl 2 / 21 days] Korrosionsfestigkeit: Test Kondition: 40 C / 90 % rh / 15 ppm H 2 S / 336 h = Besser als IEC 60068-2-43 (H 2 S) [25 C / 75 % rh / 10 ppm H 2 S / 21 Tage] = Bezogen auf das Gas (H 2 S) besser als EN 60068-2-60 (method 4) [25 C / 75 % rh / 200ppb SO 2, 200ppb NO 2, 10ppb Cl 2 / 21 Tage] 2016-09-02 15
Recommended Solder Pad Empfohlenes Lötpaddesign 8) page 25 8) Seite 25 foot print Cu area solder resist solder stencil 2016-09-02 16
Note: Anm.: For superior solder joint connectivity results we recommend soldering under standard nitrogen atmosphere. For further information please refer to our Application Note Handling and Processing Details for Ceramic LEDs. Um eine verbesserte Lötstellenkontaktierung zu erreichen, empfehlen wir, unter Standard- Stickstoffatmosphäre zu löten. Weitere Informationen finden Sie in der Applikationsschrift Handling and Processing Details for Ceramic LEDs. 2016-09-02 17
Reflow Soldering Profile Reflow-Lötprofil Product complies to MSL Level 2 acc. to JEDEC J-STD-020D.01 300 C T 250 200 240 C 217 C t P t L T p OHA04525 245 C 150 t S 100 50 25 C 0 0 50 100 150 200 250 s 300 t Profile Feature Profil-Charakteristik Ramp-up rate to preheat* ) 25 C to 150 C Time t S T Smin to T Smax Ramp-up rate to peak* ) T Smax to T P Liquidus temperature Time above liquidus temperature Symbol Symbol t S T L t L Minimum 60 Pb-Free (SnAgCu) Assembly Recommendation 2 3 K/s 100 120 2 3 217 Maximum 80 100 OHA04612 Unit Einheit s K/s C s Peak temperature Time within 5 C of the specified peak temperature T P - 5 K Ramp-down rate* T P to 100 C Time 25 C to T P T P t P 245 260 10 20 30 All temperatures refer to the center of the package, measured on the top of the component * slope calculation DT/Dt: Dt max. 5 s; fulfillment for the whole T-range 3 6 480 C s K/s s 2016-09-02 18
Taping Gurtung 8) page 25 8) Seite 25 2016-09-02 19
Tape and Reel Gurtverpackung 12 mm tape with 600 pcs. on 180 mm reel W 1 D 0 P 0 P 2 F E W A N 13.0 ±0.25 P 1 Label Direction of unreeling W 2 Direction of unreeling Leader: min. 400 mm * Trailer: min. 160 mm * *) Dimensions acc. to IEC 60286-3; EIA 481-D OHAY0324 Tape dimensions [mm] Gurtmaße [mm] Tape dimensions in mm W P 0 P 1 P 2 D 0 E F 12 + 0.3 / - 0.1 4 ± 0.1 4 ± 0.1 or 8 ± 0.1 2 ± 0.05 1.5 ± 0.1 1.75 ± 0.1 5.5 ± 0.05 Reel dimensions [mm] Rollenmaße [mm] Reel dimensions in mm A W N min W 1 W 2max 180 12 60 12.4 + 2 18.4 2016-09-02 20
_< C). _< WET Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. Version 1.3 Barcode-Product-Label (BPL) Barcode-Produkt-Etikett (BPL) EX XAM AMP MPL LE OSRAM Opto t Semiconductors ors (6P) BATCH ENO: 1234567890 E234 (1T) LOT NO: 1234567890 (9D) D/M: D/C: 1234 (X) PROD NO: 123456789(Q)QTY: AMD) AMD/ D C 9999 (G) GROUP: LX XXXX RoHS Compliant Pack: RXX R DEMY BIN1: XX-XX-X-XXX-X ML Temp ST X XXX C X XXX X_X123_1234.1234 _123 234.1234 X XX-XX-X-X X-X-X OHA04563 Dry Packing Process and Materials Trockenverpackung und Materialien OSRAM Moisture-sensitive label or print Barcode label Humidity indicator Barcode label Comparator check dot 5% 10% 15% If wet, parts still adequately dry. change desiccant If wet, examine units, if necessary bake units If wet, examine units, if necessary bake units CAUTION This bag contains MOISTURE SENSITIVE OPTO SEMICONDUCTORS (if blank, seal date is identical with date code). Moisture Level 5a 1. Shelf life in sealed bag: 24 months at < 40 C and < 90% relative humidity (RH). 2. After this bag is opened, devices that will be subjected to infrared reflow, vapor-phase reflow, or equivalent processing (peak package body temp. a) Mounted within at factory conditions of b) Stored at 3. Devices require baking, before mounting, if: a) Humidity Indicator Card is > 10% when read at 23 C ± 5 C, or b) 2a or 2b is not met. 4. If baking is required, reference IPC/JEDEC J-STD-033 for bake procedure. Bag seal date Floor time see below If blank, see bar code label 10% RH. Date and time opened: Moisture Level 1 Moisture Level 2 Moisture Level 2a LEVEL If blank, see bar code label Floor time > 1 Year Floor time 1 Year Floor time 4 Weeks 30 C/60% RH. Moisture Level 4 Moisture Level 5 Floor time 72 Hours Floor time 48 Hours Floor time 24 Hours Moisture Level 3 Floor time 168 Hours Moisture Level 6 Floor time 6 Hours Desiccant Humidity Indicator MIL-I-8835 OSRAM OHA00539 Note: Moisture-sensitive product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter Tape and Reel under the topic Dry Pack. Here you will also find the normative references like JEDEC. Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte. Bezüglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel Gurtung und Verpackung unter dem Punkt Trockenverpackung. Hier sind Normenbezüge, unter anderem ein Auszug der JEDEC-Norm, enthalten. 2016-09-02 21
_< C). _< 11 0 0144 Bin2: Q-1-20 Bin3: ML 2 2a 3 220 C R 11 0 (9D) D/C: 0144 Bin2: Q-1-20 Bin3: ML Temp ST 2 220 C R 2a 3 240 C R 260 C RT Version 1.3 Transportation Packing and Materials Kartonverpackung und Materialien Barcode label Barcode label 1. Shelf life in sealed bag: 24 months at < 40 C and < 90% relative humidity (RH). 2. After this bag is opened, devices that will be subjected to infrared reflow, vapor-phase reflow, or equivalent processing (peak package body temp. a) Mounted within b) Stored at 3. Devices require baking, before mounting, if: at factory conditions of a) Humidity Indicator Card is > 10% when read at 23 C ± 5 C, or b) 2a or 2b is not met. 4. If baking is required, reference IPC/JEDEC J-STD-033 for bake procedure. Bag seal date Date and time opened: Moisture Level 1 Moisture Level 2 Moisture Level 2a CAUTION This bag contains MOISTURE SENSITIVE OPTO SEMICONDUCTORS If blank, see bar code label Floor time see below 10% RH. (if blank, seal date is identical with date code). Moisture Level 5a Floor time > 1 Year Floor time 1 Year Floor time 4 Weeks LEVEL If blank, see bar code label Moisture Level 4 Moisture Level 5 30 C/60% RH. OSRAM Opto Semiconductors (6P) BATCH NO: 210021998 (1T) LOT NO: 123GH1234 Floor time 72 Hours Floor time 48 Hours Floor time 24 Hours Muster 0 2 (X) PROD NO: 1 (9D) D/C: 4 5 (Q)QTY: 2000 LSY T676 Bin1: P-1-20 Moisture Level 3 Floor time 168 Hours Moisture Level 6 Floor time 6 Hours Multi TOPLED Temp ST 240 C R 260 C RT Additional TEXT R077 PACKVAR: (G) GROUP: R18 DEMY P-1+Q-1 OSRAM Opto Semiconductors (6P) BATCH NO: 210021998 (1T) LOT NO: 123GH1234 Muster 0 2 (X) PROD NO: 1 4 5 (Q)QTY: 2000 LSY T676 Bin1: P-1-20 Multi TOPLED Additional TEXT R077 PACKVAR: (G) GROUP: R18 DEMY P-1+Q-1 OSRAM Packing Sealing label OHA02044 Dimensions of transportation box in mm Width Length Height Breite Länge Höhe 195 ± 5 195 ± 5 30 ± 5 2016-09-02 22
Notes The evaluation of eye safety occurs according to the standard IEC 62471:2008 ("photobiological safety of lamps and lamp systems"). Within the risk grouping system of this CIE standard, the LED specified in this data sheet fall into the class Exempt group (exposure time 10000 s). Under real circumstances (for exposure time, eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices. As a matter of principle, however, it should be mentioned that intense light sources have a high secondary exposure potential due to their blinding effect. As is also true when viewing other bright light sources (e.g. spotlights), temporary reduction in visual acuity and afterimages can occur, leading to irritation, annoyance, visual impairment, and even accidents, depending on the situation. Subcomponents of this LED contain, among other substances, goldplated and Ag-filled materials. In spite of the improved corrosion stability of this LED, it can be affected by environments that contain very high concentrations of aggressive substances. Therefore, we recommend avoiding aggressive atmospheres during storage, production and use. This LED is designed for specific/recommended applications only. Please consult OSRAM Opto Semiconductors Sales Staff in advance for detailed information on other non-recommended applications (e.g. automotive) OR Please visit www.osram-os.com/appnotes. Change management for this component is aligned with the requirements of the lighting market. Hinweise Die Bewertung der Augensicherheit erfolgt nach dem Standard IEC 62471:2008 ("photobiological safety of lamps and lamp systems"). Im Risikogruppensystem dieser CIE- Norm erfüllen die in diesem Datenblatt angegebenen LEDs folgende Gruppenanforderung - Exempt group (Expositionsdauer 10000 s). Unter realen Umständen (für Expositionsdauer, Augenpupille, Betrachtungsabstand) geht damit von diesen Bauelementen keinerlei Augengefährdung aus. Grundsätzlich sollte jedoch erwähnt werden, dass intensive Lichtquellen durch ihre Blendwirkung ein hohes sekundäres Gefahrenpotenzial besitzen. Nach einem Blick in eine helle Lichtquelle (z.b. Spotlights), kann ein temporär eingeschränktes Sehvermögen oder auch Nachbilder zu Irritationen, Belästigungen, Beeinträchtigungen oder sogar Unfällen führen. Einzelkomponenten dieser LED enthalten u.a. goldbeschichtete und Ag-gefüllte Materialien. Trotz der verbesserten Korrosionsstabilität dieser LED können Einzelkomponenten durch sehr hohe Konzentration aggressiver Substanzen angegriffen werden. Aus diesem Grund wird empfohlen, aggressive Umgebungen während der Lagerung, Produktion und im Betrieb zu vermeiden. Die LED ist ausschließlich für spezifisch empfohlene Anwendungen konzipiert. Bitte kontaktieren Sie das OSRAM Opto Semiconductors Vertriebspersonal für detailierte Informationen über nicht empfohlene Anwendungsbereiche (z.b. Automobilbereich). oder besuchen Sie www.osram-os.com/appnotes Das Änderungsmanagement dieses Bauteils ist an den Anforderungen des Lichtmarktes ausgerichtet. 2016-09-02 23
Disclaimer Language english will prevail in case of any discrepancies or deviations between the two language wordings. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components* may only be used in life-support devices** or systems with the express written approval of OSRAM OS. *) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. **) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered. Disclaimer Bei abweichenden Angaben im zweisprachigen Wortlaut haben die Angaben in englischer Sprache Vorrang. Bitte beachten! Lieferbedingungen und Änderungen im Design vorbehalten. Aufgrund technischer Anforderungen können die Bauteile Gefahrstoffe enthalten. Für weitere Informationen zu gewünschten Bauteilen, wenden Sie sich bitte an unseren Vertrieb. Falls Sie dieses Datenblatt ausgedruckt oder heruntergeladen haben, finden Sie die aktuellste Version im Internet. Verpackung Benutzen Sie bitte die Ihnen bekannten Recyclingwege. Wenn diese nicht bekannt sein sollten, wenden Sie sich bitte an das nächstgelegene Vertriebsbüro. Wir nehmen das Verpackungsmaterial zurück, falls dies vereinbart wurde und das Material sortiert ist. Sie tragen die Transportkosten. Für Verpackungsmaterial, das unsortiert an uns zurückgeschickt wird oder das wir nicht annehmen müssen, stellen wir Ihnen die anfallenden Kosten in Rechnung. Bauteile, die in lebenserhaltenden Apparaten und Systemen eingesetzt werden, müssen für diese Zwecke ausdrücklich zugelassen sein! Kritische Bauteile* dürfen in lebenserhaltenden Apparaten und Systemen** nur dann eingesetzt werden, wenn ein schriftliches Einverständnis von OSRAM OS vorliegt. *) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems führen wird oder die Sicherheit oder Effektivität dieses Apparates oder Systems beeinträchtigt. **) Lebenserhaltende Apparate oder Systeme sind für (a) die Implantierung in den menschlichen Körper oder (b) für die Lebenserhaltung bestimmt. Falls Sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. 2016-09-02 24
Glossary 1) Brightness: Brightness values are measured during a current pulse of typically 10 ms, with a tolerance of +/- 7%. 2) Reverse Voltage: Not designed for reverse operation. Continuous reverse voltage can cause migration and LED damage. 3) Reverse Operation: A minimum of 10 hours of reverse operation is permisable in total. 4) Thermal Resistance: Rth max is based on statistic values (6σ). 5) Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 6) Chromaticity coordinate groups: Chromaticity coordinates are measured during a current pulse of typically 25 ms, with an internal reproducibility of ± 0.005 and an expanded uncertainty of ± 0.01 (acc. to GUM with a coverage factor of k = 3). 7) Characteristic curve: In the range where the line of the graph is broken, you must expect higher differences between single LEDs within one packing unit. 8) Tolerance of Measure: Unless otherwise noted in drawing, tolerances are specified with ±0.1 and dimensions are specified in mm. Glossar 1) Helligkeit: Helligkeitswerte werden während eines Strompulses mit einer typischen Dauer von 10 ms, mit einer Genauigkeit von ± 7% ermittelt. 2) Sperrspannung: Die LED kann nicht in Sperrrichtung betrieben werden. Kontinuierlicher Rückwärtsbetrieb kann Migration und eine Beschädigung der LED zur Folge haben. 3) Betrieb in Sperrrichtung: Eine Gesamtbetriebszeit von wenigstens 10 Stunden in Sperrrichtung ist gewährleistet. 4) Wärmewiderstand: Rth max basiert auf statistischen Werten (6σ). 5) Typische Werte: Wegen der besonderen Prozessbedingungen bei der Herstellung von LED können typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes überein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden können. Falls erforderlich, z.b. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankündigung geändert. 6) Farbortgruppen: Farbkoordinaten werden während eines Strompulses einer typischen Dauer von 25 ms, mit einer internen Reproduzierbarkeit von ± 0,005 und einer erweiterten Messunsicherheit von ± 0,01 gemessen (gemäß GUM mit Erweiterungsfaktor k = 3). 7) Kennlinien: Im gestrichelten Bereich der Kennlinien muss mit erhöhten Abweichungen zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden. 8) Maßtoleranz: Wenn in der Zeichnung nicht anders angegeben, gilt eine Toleranz von ±0,1. Maße werden in mm angegeben. 2016-09-02 25
Published by OSRAM Opto Semiconductors GmbH Leibnizstraße 4, D-93055 Regensburg www.osram-os.com All Rights Reserved. 2016-09-02 26
Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Osram Opto Semiconductor: -N2N4-XX55-1 -N3N5-XX52-1 -N3N5-XX53-1 GW CSSRM2.PM-N2N4-XX51-1 -MFN2-XX57-1