DIN / DIN / 2,00mm Hard Metric DIN / DIN / 2.00mm Hard Metric
|
|
- Til Schmitz
- vor 7 Jahren
- Abrufe
Transkript
1 / /,00mm / /.00mm D-Sub cover / Switces Powerinlets Poweroutlets Pin eader Terminal Blocks Memory Card accessories Female eader connectors Sockets / Jumper Micro Miniature 78 (DIN EN ) Steckverbinder für gedruckte Scaltungen der ASSMANN WSW components wurden seinerzeit für die Verwendung in 9 ZollSystemen im Kontaktraster,54mm entwickelt. Dieses Steckverbindersystem erfreut sic nac wie vor großer Beliebteit und wird aufgrund seiner Variantenvielfalt auc in Applikationen mit oen Polzalen vorgeseen. Steckverbinder stellen ein besonders zuverlässiges und erprobtes Verbindungssystem dar, welces über alle gängigen Ansclusstecniken z.b.: Einlöt-, Wire Wrap und Press-Fit verfügt. Typisce Anwendungen für diese Steckverbinderfamilie finden sic in den Anwenderbereicen der Industrie, Telekommunikation, Medizintecnik, Militärtecnik, Bantecnik, Mess- und Regeltecnik, Automatisierungsund Steuerungstecnik, Luft- und Raumfarttecnik, Computertecnik und vielen weiteren Bereicen. ASSMANN WSW components deckt naezu das gesamte Spektrum an Bauformen ab wie B,B/, C,C/, R,R/, Q,Q/ und M ab. Neben den Standardprodukten liefert die ASSMANN WSW components auc eine Vielzal an kundenspezifiscen Lösungen und Sonderbestückungen. Hoctemperaturisolierkörpervarianten und Clipversionen zum Fixieren der Steckverbinder auf der Leiterplatten vervollständigen die Produktpalette. Die Einpresstecnik wird über das wolbekannte `Nadelör Kontaktdesign realisiert. Aus dem Hause ASSMANN WSW components sind weiterin die traditionellen Steckverbinder nac DIN 467 im Raster,50mm erältlic, die einst die Vorgänger der o.g. Steckverbinderfamilie waren. Dieses Steckverbindersystem zeicnet sic durc seine erprobte Robusteit aus. Steckverbinder nac können in drei Polzalen, 3-, -, und 3polig, sowol als Stift- als auc als Federleisten geliefert werden. Hauptsäclic kommt ier die versilberte Ausfürung zum Einsatz. (DIN EN ) connectors for printed circuits of ASSMANN WSW components ave been developed as connectors component for 9 inc systems wit a contact pitc of.54mm. Today, tis connector family is well-known and still used on ig volume applications due to te full range of products and te wide range of available pin counts. Key caracteristics of tis product range are ig reliability and te availability many different contact tecnologies eg. : THT, Wire-Wrap and Press-fit. Typical applications for tis connector system are to be found in te field of industry, telecom, medicine, military, trains, measurement and instrumentation, automation, control devices, aerospace and computers and many oter areas. ASSMANN WSW components offers te complete range of connectors like style B, B/, C, C /, R,R/, Q, Q/ and style M. Beside standard products ASSMANN WSW components deliver a variety of custom specific solutions, customer specific contact loadings, ig temperature insulators and board locks. Te design of te press-fit contacts is based on te well-known `eye of te needle - design. ASSMANN WSW components also te traditionally connectors based on.50mm contact pitc. Known as te forerunner of te, tis connector system still sows a solid robustness and is used in today applications. Tese connectors can be delivered in tree different pin counts as tere are 3,, and 3 contacts, as male and/or female connector. Te commonly used plating is based on silver surface.
2 accessories / /,00mm / /.00mm Produktbescreibung, Bauform B, Messerleiste, Raster,54mm 80, Bauform B, Federleiste, gerade, Raster,54mm 8, Bauform C, Messerleiste, Raster,54mm 8, Bauform C, Federleiste, gerade, Raster,54mm 83, Bauform Q, Messerleiste, gerade, Raster,54mm 84, Bauform Q, Federleiste, abgewinkelt, Raster,54mm 85, Bauform R, Messerleiste, gerade, Raster,54mm 86, Bauform R, Federleiste, abgewinkelt, Raster,54mm 87, Messerleiste, abgewinkelte Lötstifte, Raster,50mm 88, Federleiste, Raster,50mm 89,00mm Übersict 90,00mm, Bauform A, Messerleiste, gerade 9,00mm, Bauform B5, Messerleiste, gerade 94,00mm, Bauform B, Messerleiste, gerade 96,00mm, Bauform B9, Messerleiste, gerade 98,00mm, Bauform C, Messerleiste, gerade 00,00mm, Bauform A, Federleiste, abgewinkelt 0,00mm, Bauform B5, Federleiste, abgewinkelt 03,00mm, Bauform B, Federleiste, abgewinkelt 04,00mm, Bauform B9, Federleiste, abgewinkelt 05,00mm, Bauform C, Federleiste, abgewinkelt 06,00mm Ceckliste 07 Seite D-Sub Hauben / Multiflex - DIN 465 Scalter Einbaustecker Einbaubucsen Stiftleisten Bucsenleisten Sockel / Jumper Klemmleisten Speicerkarten Steckverbinder Micro- Miniature Product description page, style B, male, pitc.54mm 80, style B, female, straigt, pitc.54mm 8, style C, male, pitc.54mm 8, style C, female, straigt, pitc.54mm 83, style Q, male, straigt, pitc.54mm 84, style Q, female, rigt-angled, pitc.54mm 85, style R, male, straigt, pitc.54mm 86, style R, female, rigt angled, pitc.54mm 87, male, rigt-angled solder pins, pitc.50mm 88, female, pitc.50mm 89.00mm Overview 90.00mm, style A, male, straigt 9.00mm, style B5, male, straigt 94.00mm, style B, male, straigt 96.00mm, style B9, male, straigt 98.00mm, style C, male, straigt 00.00mm, style A, female, rigt-angled 0.00mm, style B5, female, rigt-angled 03.00mm, style B, female, rigt-angled 04.00mm, style B9, female, rigt-angled 05.00mm, style C, female, rigt-angled 06.00mm ceck list 07 79
3 , Bauform B, Messerleiste, 6-64 polig, Raster,54mm, style B, male, 6-64 contacts, pitc.54mm D-Sub cover / Messing Kontaktoberfläce 40mΩ max 0Ω Min -55 C - +5 C Blisterverpackung Brass 40mΩ max 0Ω min Tray packing Switces Powerinlets Poweroutlets Pin eader Terminal Blocks Memory Card accessories Female eader connectors Sockets / Jumper Micro Miniature 80 A - B M x x - x Bestückung 64ab* / 3a / 3ab* / 6a Positions loaded 64ab* / 3a / 3ab* / 6a Ausfürung, Pinlänge R - abgewinkelt, 3mm (0.6x0.6) T - gerade, 3.5mm (0.6x0.6), tail lengt R - rigt-angled, 3mm (0.6x0.6) T - straigt, 3.5mm (0.6x0.6) Gütestufe - Stufe 3 * - Stufe - Stufe Quality class - Class 3 * - Class - Class Bitte x durc die geeignete Option ersetzen Please replace x wit appropriate option
4 snipredlos tiw Pospor bronze 0Ω min -40 C to +05 C Tray packing Pinlänge a T - 4.0mm* T.5 -.5mm* WAB - 3.0mm* WBB - 7.0mm W5-5.0mm W7-7.4mm Tail lengt a T - 4.0mm* T.5 -.5mm* WAB - 3.0mm* WBB - 7.0mm W5-5.0mm W7-7.4mm Gütestufe - Stufe 3 * - Stufe - Stufe A - B F x x - x Quality class - Class 3 * - Class - Class Bitte x durc die geeignete Option ersetzen Please replace x wit appropriate option Speicerkarten Klemmleisten seirossecca Steckverbinder Positions loaded 64ab* / 3a / 3ab* / 6a Bestückung 64ab* / 3a / 3ab* / 6a MicroMiniature Stiftleisten Bucsenleisten Sockel / Jumper Einbaustecker snipredlos tiw Einbaubucsen Scalter Posporbronze Kontaktoberfläce 0Ω Min -40 C C Blisterverpackung D-Sub Hauben /, Bauform B, Federleiste, gerade, 6-64 polig, Raster,54mm, style B, female, straigt, 6-64 contacts, pitc.54mm 8
5 , Bauform C, Messerleiste, 3-96 polig, Raster,54mm, style C, male, 3-96 contacts, pitc.54mm D-Sub cover / Messing Kontaktoberfläce 40mΩ max 0Ω Min Blisterverpackung Brass 40mΩ max 0Ω min Tray packing Switces Powerinlets Poweroutlets Pin eader Terminal Blocks Memory Card accessories Female eader connectors Sockets / Jumper Bestückung 96abc* / 64ac* / 64ab / 3a / 48abc / 3ac*, tail lengt Ausfürung, Pinlänge R - abgewinkelt, 3mm(0.6x0.6) R - rigt-angled, 3mm(0.6x0.6) T - gerade, 3.5mm(0.6x0.6) T - straigt, 3.5mm(0.6x0.6) Gütestufe - Stufe 3 * - Stufe - Stufe Micro Miniature 8 Positions loaded 96abc* / 64ac* / 64ab / 3a / 48abc / 3ac* A - C M x x - x Quality class - Class 3 * - Class - Class Bitte x durc die geeignete Option ersetzen Please replace x wit appropriate option
6 snipredlos tiw Brass 40mΩ max 0Ω min Tray packing Pinlänge a T - 4.0mm* T.5 -.5mm* WAB - 3.0mm* WBB - 7.0mm W5-5.0mm W7-7.4mm Tail lengt a T - 4.0mm* T.5 -.5mm* WAB - 3.0mm* WBB - 7.0mm W5-5.0mm W7-7.4mm Gütestufe - Stufe 3 * - Stufe - Stufe A - C F x x - x Quality class - Class 3 * - Class - Class Bitte x durc die geeignete Option ersetzen Please replace x wit appropriate option Speicerkarten Klemmleisten seirossecca Steckverbinder Positions loaded 96abc* / 64ac* / 64ab / 3a / 48abc / 3ac* Bestückung 96abc* / 64ac* / 64ab / 3a / 48abc / 3ac* MicroMiniature Stiftleisten Bucsenleisten Sockel / Jumper Einbaustecker snipredlos tiw Einbaubucsen Scalter Messing Kontaktoberfläce 40mΩ max 0Ω Min Blisterverpackung D-Sub Hauben /, Bauform C, Federleiste, gerade, 3-96 polig, Raster,54mm, style C, female, straigt, 3-96 contacts, pitc.54mm 83
7 , Bauform Q, Messerleiste, gerade, 6-64 polig, Raster,54mm, style Q, male, straigt, 6-64 contacts, pitc.54mm D-Sub cover / Messing Kontaktoberfläce 40mΩ max 0Ω Min Blisterverpackung Brass 40mΩ max 0Ω min Tray packing Switces Powerinlets Poweroutlets Pin eader Terminal Blocks Memory Card accessories Female eader connectors Sockets / Jumper Positions loaded 64ab* / 3a / 3ab* / 6a Pinlänge a T - 4.0mm* T.5 -.5mm* WAB - 3.0mm* WBB - 7.0mm W5-5.0mm W7-7.4mm Tail lengt a T - 4.0mm* T.5 -.5mm* WAB - 3.0mm* WBB - 7.0mm W5-5.0mm W7-7.4mm Gütestufe - Stufe 3 * - Stufe - Stufe Micro Miniature 84 Bestückung 64ab* / 3a / 3ab* / 6a A - Q M x x - x Quality class - Class 3 * - Class - Class Bitte x durc die geeignete Option ersetzen Please replace x wit appropriate option
8 snipredlos tiw Brass 40mΩ max 0Ω min Tray packing Gütestufe - Stufe 3 * - Stufe - Stufe A - Q F x R - x Quality class - Class 3 * - Class - Class Bitte x durc die geeignete Option ersetzen Please replace x wit appropriate option Speicerkarten Klemmleisten seirossecca Steckverbinder Ausfürung, Pinlänge, tail lengt - rigt-angled, 3mm(0.6x0.6) R - abgewinkelt, 3mm(0.6x0.6) R Positions loaded 64ab* / 3a / 3ab* / 6a MicroMiniature Bestückung 64ab* / 3a / 3ab* / 6a Stiftleisten Bucsenleisten Sockel / Jumper Einbaustecker snipredlos tiw Einbaubucsen Scalter Messing Kontaktoberfläce 40mΩ max 0Ω Min Blisterverpackung D-Sub Hauben /, Bauform Q, Federleiste, abgewinkelt, 6-64 polig, Raster,54mm, style Q, female, rigt-angled, 6-64 contacts, pitc.54mm 85
9 , Bauform R, Messerleiste, gerade, 3-96 polig, Raster,54mm, style R, male, straigt, 3-96 contacts, pitc.54mm D-Sub cover / Messing Kontaktoberfläce 40mΩ max 0Ω Min Blisterverpackung Brass 40mΩ max 0Ω min Tray packing Switces Powerinlets Poweroutlets Pin eader Terminal Blocks Memory Card accessories Female eader connectors Sockets / Jumper Positions loaded 64ab* / 3a / 3ab* / 6a / 64ac Pinlänge a T - 4.0mm* T.5 -.5mm* WAB - 3.0mm* WBB - 7.0mm W5-5.0mm W7-7.4mm Tail lengt a T - 4.0mm* T.5 -.5mm* WAB - 3.0mm* WBB - 7.0mm W5-5.0mm W7-7.4mm Gütestufe - Stufe 3 * - Stufe - Stufe Micro Miniature 86 Bestückung 64ab* / 3a / 3ab* / 6a / 64ac A - R M x x - x Quality class - class 3 * - class - class Bitte x durc die geeignete Option ersetzen Please replace x wit appropriate option
10 snipredlos tiw Pospor bronze 40mΩ max 0Ω min Tray packing A - R F x R - x Quality class - class 3 * - class - class Bitte x durc die geeignete Option ersetzen Please replace x wit appropriate option Speicerkarten Klemmleisten seirossecca Steckverbinder Gütestufe - Stufe 3 * - Stufe - Stufe Ausfürung, Pinlänge, tail lengt R - abgewinkelt, 3mm(0.6x0.6) R - rigt-angled, 3mm(0.6x0.6) MicroMiniature Bestückung Position wit contacts 96abc* / 64ac* / 64ab / 3a / 48abc 96abc* / 64ac* / 64ab / 3a, / 3ac* 48abc / 3ac* Stiftleisten Bucsenleisten Sockel / Jumper Einbaustecker snipredlos tiw Einbaubucsen Scalter Posporbronze Kontaktoberfläce 40mΩ max 0Ω Min Blisterverpackung D-Sub Hauben /, Bauform R, Federleiste, abgewinkelt, 3-96 polig, Raster,54mm, style R, female, rigt angled, 3-96 contacts, pitc.54mm 87
11 , Messerleiste, abgewinkelte Lötstifte, 3-3 polig, Raster,50mm, male, rigt-angled solder pins, 3-3 contacts, pitc.50mm D-Sub cover / PC, UL94V- Messing Kontaktoberfläce Hartversilbert 5mΩ max 0mΩ Min 900V AC Kartonbox PC, UL94V- Brass Hard-silver-plated 5mΩ max 0Ω min 900V AC Carton box packing Switces Dimensions A B C D Powerinlets Poweroutlets Pin eader Terminal Blocks Memory Card accessories Female eader connectors Sockets / Jumper Micro Miniature 88 A xx - S / SILVER Polzal 3 / / 3 3 / / 3 Ausfürung, Pinlänge S - abgewinkelt, 3.3mm(Ø0.80), tail lengt S - rigt-angled, 3.3mm(Ø0.80) Bitte x durc die geeignete Option ersetzen Please replace x wit appropriate option
12 Dimensions A B C D A - xx x / SILVER Ausfürung, Pinlänge S - Lötkelce L - Lötstifte, 4mm(0.40x0.70), tail lengt S - Solder cups L - Solder pins, 4mm(0.40x0.70) Bitte x durc die geeignete Option ersetzen Please replace x wit appropriate option Speicerkarten Klemmleisten seirossecca Steckverbinder 3 / / 3 Polzal 3 / / 3 MicroMiniature Stiftleisten Bucsenleisten Sockel / Jumper Scalter snipredlos tiw PC, UL94V- brass Hard-silver-plated 5mΩ max 0Ω min 900V AC carton box packing Einbaustecker snipredlos tiw Einbaubucsen PC, UL94V- Messing Kontaktoberfläce Hartversilbert 5mΩ max 0Ω Min 900V AC Kartonbox D-Sub Hauben /, Federleiste, Raster,50mm, female, pitc.50mm 89
13 ,00mm Übersict.00mm Overview D-Sub cover / Type B Type C Type L Type M Type N Ramen / Srouds Kodierstifte / Coding Keys Scirmblece / Sielding Cover Type A Switces Powerinlets Poweroutlets Pin eader Terminal Blocks Memory Card accessories Female eader connectors Sockets / Jumper,00mm Steckverbinder erfüllen die IEC 97 und IEC Micro Miniature 90.00mm connectors comply wit IEC 97 und IEC
14 snipredlos tiw Pospor bronze 0mW max Insualtion resistance 04W max Tube packing MicroMiniature Detailierter Bestellcode auf den Seiten 9 /93 Detailed ordercode see page 9 /93 Speicerkarten Klemmleisten seirossecca Steckverbinder Stiftleisten Bucsenleisten Sockel / Jumper Einbaustecker snipredlos tiw Einbaubucsen Scalter Posporbronze Kontaktoberfläce 0mW max 04W max Stangenverpackung D-Sub Hauben /,00mm, Bauform A, Messerleiste, gerade.00mm, style A, male, straigt 9
15 ,00mm, Bauform A, Messerleiste, gerade.00mm, style A, male, straigt D-Sub cover / Multiflex - DIN 465 Polzal 0 Ausfürung z - a b c d e f - A - M0P H Polzal Ausfürung Switces Powerinlets Poweroutlets 0 z - a b c d e f - A - M0P H Pin eader Terminal Blocks Memory Card Female eader accessories connectors Sockets / Jumper Stiftoptionen / Pin options A - M54P H Polzal 54 Ausfürung z C a b c d e f C Micro - Miniature 9
16 z a b c d e f - Polzal 54 Ausfürung z a b c d e f - 54 A - M54P0 - - H Stiftoptionen / Pin options Ausfürung z a b c d e f C C Polzal Stiftleisten Bucsenleisten Sockel / Jumper Speicerkarten Klemmleisten seirossecca Steckverbinder A - M54P0 - - H Scalter A - M54P H Einbaustecker snipredlos tiw Einbaubucsen snipredlos tiw 54 Ausfürung Polzal MicroMiniature D-Sub Hauben /,00mm, Bauform A, Messerleiste, gerade.00mm, style A, male, straigt 93
17 ,00mm, Bauform B5, Messerleiste, gerade.00mm, style B5, male, straigt D-Sub cover / Posporbronze Kontaktoberfläce 04Ω min Stangenverpackung Switces Powerinlets Poweroutlets Pin eader Terminal Blocks Memory Card accessories Female eader connectors Sockets / Jumper Micro Miniature 94 Detailierter Bestellcode auf den Seite 95 Detailed ordercode see page 95 Pospor bronze 04Ω min Tube packing
18 z a b c d e f - Polzal 5 Ausfürung z a b c d e f - 75 A - B5M75P H Stiftoptionen / Pin options Ausfürung z a b c d e f C C Polzal Stiftleisten Bucsenleisten Sockel / Jumper Speicerkarten Klemmleisten seirossecca Steckverbinder A - B5M5P H Scalter A - B5M5P H Einbaustecker snipredlos tiw Einbaubucsen snipredlos tiw 5 Ausfürung Polzal MicroMiniature D-Sub Hauben /,00mm, Bauform B5, Messerleiste, gerade.00mm, style B5, male, straigt 95
19 ,00mm, Bauform B, Messerleiste, gerade.00mm, style B, male, straigt D-Sub cover / Posporbronze Kontaktoberfläce 04Ω min Stangenverpackung Switces Powerinlets Poweroutlets Pin eader Terminal Blocks Memory Card accessories Female eader connectors Sockets / Jumper Micro Miniature 96 Detailierter Bestellcode auf den Seite 97 Detailed ordercode see page 97 Pospor bronze 04Ω min Tube packing
20 z a b c d e f - Polzal 0 Ausfürung z a b c d e f - 54 A - BM54P H Stiftoptionen / Pin options Ausfürung z a b c d e f C C Polzal Stiftleisten Bucsenleisten Sockel / Jumper Speicerkarten Klemmleisten seirossecca Steckverbinder A - BM0P H Scalter A - BM0P H Einbaustecker snipredlos tiw Einbaubucsen snipredlos tiw 0 Ausfürung Polzal MicroMiniature D-Sub Hauben /,00mm, Bauform B, Messerleiste, gerade.00mm, style B, male, straigt 97
21 ,00mm, Bauform B9, Messerleiste, gerade.00mm, style B9, male, straigt D-Sub cover / Posporbronze Kontaktoberfläce 04Ω min Stangenverpackung Switces Powerinlets Poweroutlets Pin eader Terminal Blocks Memory Card accessories Female eader connectors Sockets / Jumper Micro Miniature 98 Detailierter Bestellcode auf den Seite 99 Detailed ordercode see page 99 Pospor bronze 04Ω min Tube packing
22 z a b c d e f - Polzal 95 Ausfürung z a b c d e f - 33 A - B9M33P H Stiftoptionen / Pin options Ausfürung z a b c d e f C C Polzal Stiftleisten Bucsenleisten Sockel / Jumper Speicerkarten Klemmleisten seirossecca Steckverbinder A - B9M95P H Scalter A - B9M95P H Einbaustecker snipredlos tiw Einbaubucsen snipredlos tiw 95 Ausfürung Polzal MicroMiniature D-Sub Hauben /,00mm, Bauform B9, Messerleiste, gerade.00mm, type B9, male, straigt 99
23 ,00mm, Bauform C, Messerleiste, gerade.00mm, style C, male, straigt D-Sub cover / Posporbronze Kontaktoberfläce 04Ω min Stangenverpackung Switces Powerinlets Poweroutlets Pin eader Terminal Blocks Memory Card accessories Female eader connectors Sockets / Jumper Micro Miniature 00 Detailierter Bestellcode auf den Seite 0 Detailed ordercode see page 0 Pospor bronze 04Ω min Tube packing
24 z a b c d e f - Polzal 55 Ausfürung z a b c d e f - 77 A - CM77P H Stiftoptionen / Pin options Ausfürung z a b c d e f C C Polzal Stiftleisten Bucsenleisten Sockel / Jumper Speicerkarten Klemmleisten seirossecca Steckverbinder A - CM55P H Scalter A - CM55P H Einbaustecker snipredlos tiw Einbaubucsen snipredlos tiw 55 Ausfürung Polzal MicroMiniature D-Sub Hauben /,00mm, Bauform C, Messerleiste, gerade.00mm, style C, male, straigt 0
25 ,00mm, Bauform A, Federleiste, abgewinkelt.00mm, style A, female, rigt-angled D-Sub cover / Posporbronze Kontaktoberfläce 04Ω min Stangenverpackung Switces Powerinlets Poweroutlets Pin eader Terminal Blocks Memory Card accessories Female eader connectors Sockets / Jumper Micro Miniature 0 A - F05F H Pospor bronze 04Ω min Tube packing
26 snipredlos tiw Pospor bronze 0mW max Insualtion resistance 04W max Tube packing A - B5F55F H MicroMiniature Speicerkarten Klemmleisten seirossecca Steckverbinder Stiftleisten Bucsenleisten Sockel / Jumper Einbaustecker snipredlos tiw Einbaubucsen Scalter Posporbronze Kontaktoberfläce 0mW max 04W max Stangenverpackung D-Sub Hauben /,00mm, Bauform B5, Federleiste, abgewinkelt.00mm, style B5, female, rigt-angled 03
27 ,00mm, Bauform B, Federleiste, abgewinkelt.00mm, style B, female, rigt-angled D-Sub cover / Posporbronze Kontaktoberfläce 04Ω min Stangenverpackung Switces Powerinlets Poweroutlets Pin eader Terminal Blocks Memory Card accessories Female eader connectors Sockets / Jumper Micro Miniature 04 A - B05F H Pospor bronze 04Ω min Tube packing
28 snipredlos tiw Pospor bronze 0mW max Insualtion resistance 04W max Tube packing A - B9F955F H MicroMiniature Speicerkarten Klemmleisten seirossecca Steckverbinder Stiftleisten Bucsenleisten Sockel / Jumper Einbaustecker snipredlos tiw Einbaubucsen Scalter Posporbronze Kontaktoberfläce 0mW max 04W max Stangenverpackung D-Sub Hauben /,00mm, Bauform B9, Federleiste, abgewinkelt.00mm, style B9, female, rigt-angled 05
29 ,00mm, Bauform C, Federleiste, abgewinkelt.00mm, style C, female, rigt-angled D-Sub cover / Posporbronze Kontaktoberfläce 04Ω min Stangenverpackung Switces Powerinlets Poweroutlets Pin eader Terminal Blocks Memory Card accessories Female eader connectors Sockets / Jumper Micro Miniature 06 A - CF555F H Pospor bronze 04Ω min Tube packing
30 ,00mm Ceckliste.00mm ceck list Tel: Fax: Mustermenge / Sample Qty: Jaresbedarf / Annual demand: D-Sub Hauben / Firma / Company: Kontaktperson / Contact Name: Adresse / Adress: B B9 Type-M Connector GF G=0,38µm H=0,76µm* J=µm gold on contact area Bitte Tabelle auswälen und mit Code für Pinlänge vervollständigen. Vergütung der Pins durc x markieren. Please coose and complete tab wit code for pinlengt. Please mark plating wit x. MicroMiniature Speicerkarten Klemmleisten seirossecca Steckverbinder options: Stiftleisten Bucsenleisten Sockel / Jumper Type-C Connector Einbaustecker snipredlos tiw Einbaubucsen Scalter Type-B Connector B5 snipredlos tiw Type-A Connector 07
DIN41612 / DIN41617 / 2.00mm Hard Metric DIN41612 / DIN41617 / 2.00mm Hard Metric
DIN41612 / DIN41617 / 2.00mm Hard Metric DIN41612 / DIN41617 / 2.00mm Hard Metric Cable assemblies D-Sub / Hoods Centronics Modular USB Switches Powercords Powerinlets DIN41612 Hardmetric DIN 41612 (DIN
MehrSchalter. Switches. the user to make or cut an electrical connection. Commonly used are THT- and SMD-contact styles based
Scalter Switces D-Sub cover / Multiflex DIN 41651 Switces Powerinlets Poweroutlets Pin eader Terminal Blocks Memory Card accessories Female eader connectors Sockets / Jumper Micro Miniature 148 SSMNN WSW
MehrCentronics Steckverbinder Centronics connectors
entronics Steckverbinder entronics connectors D-Sub cover / entronics US Switces Powerinlets Poweroutlets Pin eader Terminal locks Memory ard accessories emale eader connectors Sockets / Jumper / P Micro
MehrSockel Sockets. The wide range of sockets from ASSMANN WSW components is a reasonable alternative compared with
Sockel Sockets D-Sub cover / Switces Powerinlets Poweroutlets Pin eader Terminal Blocks Memory Card accessories Female eader connectors Sockets / Jumper Micro Miniature 218 Die breite Produktpalette an
MehrKurzschlussbrücken / Lötstützpunkte Jumper / Solder terminals
Kurzsclussbrücken / Lötstützpunkte Jumper / Solder terminals D-Sub cover / Multifle Switces Powerinlets Poweroutlets Pin eader Terminal Blocks Memory Card accessories Female eader connectors Sockets /
MehrMiniDIN. MiniDIN. Applikationen in den Bereichen Audio und Video eingesetzt. Der Markt der sogenannte `braunen Ware hat
D-Sub cover / Switces Powerinlets Poweroutlets Pin eader Terminal Blocks Memory Card accessories Female eader connectors Sockets / Jumper Micro Miniature 208 Steckverbinder der ASSMANN WSW components werden
MehrEinbaustecker / Einbaubuchsen Powerinlets / Poweroutlets
Einbaustecker / Einbaubucsen Powerinlets / Poweroutlets D-Sub cover / Switces Powerinlets Poweroutlets Pin eader Terminal Blocks Memory Card accessories emale eader connectors Sockets / Jumper C / PC Micro
MehrModular Steckverbinder Modular connectors
Steckverbinder connectors D-Sub cover / Switces Powerinlets Poweroutlets Pin eader Terminal Blocks Memory Card accessories Female eader connectors Sockets / Jumper Micro Miniature 8 Steckverbinder der
MehrDIN Multiflex DIN Multiflex
DIN 41651 - Multiflex DIN 41651 - Multiflex D-Sub cover / Switces Powerinlets Poweroutlets Pin eader Terminal Blocks Memory Card accessories Female eader connectors Sockets / Jumper Micro Miniature 60
MehrD-Sub D-Sub. ASSMANN WSW components D-Subminiatur connectors are dimensionally produced according to DIN 41617
D-ub D-ub D-ub cover / Multifle DIN 41651 witces Powerinlets Poweroutlets Pin eader Terminal locks Memory Card accessories emale eader connectors ockets / Jumper C / PC Micro Miniature 6 D-ubminiatur teckverbinder
MehrStift- und Buchsenleisten Pin and female header
Stift- und Buchsenleisten Pin and female header Cable assemblies D-Sub / Hoods Centronics Modular USB Switches Powercords Powerinlets DIN41612 Hardmetric Der Produktbereich `Stift- und Buchsenleisten von
MehrMicro-Miniature Steckverbinder Micro-Miniature connectors
Micro-Miniature Steckverbinder Micro-Miniature connectors Produktbeschreibung Seite Micro-Miniature Steckverbinder, polig, Raster 1,27mm, IDC 414 Micro-Miniature Steckverbinder, Buchse, polig, Raster 1,27mm,
MehrSpeicherkarten Steckverbinder Memory Card connectors
Speicherkarten Steckverbinder Memory Card connectors Multiflex Modular USB Switches Powercords MiniDIN Sockets / Strips Terminal Blocks Memory Card FFC / FPC 352 Im Zuge des zunehmenden Einsatzes von Speicherkarten,
MehrD-Sub Hauben D-Sub cover
D-Sub Hauben D-Sub cover D-Sub cover / entronics US Switces Powerinlets Poweroutlets Pin eader Terminal locks Memory ard accessories Female eader connectors Sockets / Jumper FF / FP Micro Miniature 36
MehrDIN Steckverbinder / Connectors
14 DIN 41617 Steckverbinder / Connectors Steckverbinder DIN 41617 Connectors DIN 41617 Dieser traditionelle Steckverbinder geht nach wie vor immer noch seinen Weg in den vielfältigsten Anwendungsbereichen.
MehrSchalter Switches. WSW components angeboten. assemblies. Cable. D-Sub / Hoods Centronics. Multiflex DIN Modular IEEE1394 USB.
Schalter Switches Multiflex Modular USB Switches Powercords MiniDIN Sockets / Strips Terminal Blocks Memory Card FFC / FPC 162 SSMNN WSW components bietet ein reichhaltiges Sortiment an Standard-Schaltern
MehrSockel Sockets. assemblies. Cable. D-Sub / Hoods Centronics DIN Multiflex - Modular USB IEEE1394. Switches Powercords. Powerinlets.
Sockel Sockets Cable assemblies D-Sub / Hoods Centronics Modular USB Switches Powercords Powerinlets DIN41612 Hardmetric Die breite Produktpalette an Sockeln von ASSMANN WSW components stellt eine kostengünstige
MehrMiniDIN MiniDIN. assemblies. Cable. D-Sub / Hoods Centronics DIN Multiflex - Modular USB IEEE1394. Switches Powercords. Powerinlets.
MiniDIN MiniDIN Cable assemblies D-Sub / Hoods Centronics Modular USB Switches Powercords Powerinlets DIN41612 Hardmetric MiniDIN Steckverbinder der ASSMANN WSW components werden in geschirmter und ungeschirmter
MehrUSB / IEEE 1394 Steckverbinder USB / IEEE 1394 connectors
USB / IEEE 1394 Steckverbinder USB / IEEE 1394 connectors Cable assemblies D-Sub / Hoods Centronics Modular USB Switches Powercords Powerinlets USB Steckverbinder von SSMNN WSW components sind verpolungssichere
MehrLüfter. Fans. Finger - and U-shaped. heatsinks. Attachables. with solderpin. with solderpins. Extruded. standard length. Extruded.
Fger - and U-shaped heatsks Attachables with solderps with solderp standard length h heatsks Profiles Retag Mountg sprgs accessories accessories Distance spacers Technical eplanation 556 ASSMANN WSW components,
MehrAufsteckkühlkörper Attachable heatsinks
Attachable Finger - and U-shaped Attachables with solderpins with solderpin standard length h Profiles Retaining Mounting springs accessories accessories Distance spacers Fans Technical explanation 442
MehrMICRO MINIATURE & MINI CONNECTORS
MICRO MINIATURE & MINI CONNECTORS G e r m a n y - H o n g K o n g - Ta i w a n - T h e N e t h e r l a n d s - S o u t h A f r i c a - U S A QUALITÄT-DIENSTLEISTUNG-INNOVATION QUALITY - SERVICE - INNOVATION
MehrLüfter Fans. Finger-shaped Attachable Extruded. with solderpins. standard length. Extruded. Die-cast Profiles Mounting.
Lüfter Fans Finger-shaped Attachable ASSMANN WSW components, Hersteller und Systemanbieter für Kühlkörper, Steckverbinder und Kabelkonfektion bietet ein breites Spektrum an unterschiedlichen Lüftern an.
MehrModular Steckverbinder Modular connectors
Modular Steckverbinder Modular connectors Cable assemblies D-Sub / Hoods Centronics Modular USB Switches Powercords Powerinlets Modular Steckverbinder der ASSMANN WSW components sind seit vielen Jahren
MehrAufsteckkühlkörper Attachable heatsinks
Aufsteckkühlkörper Attachable heatsinks Finger-shaped Attachable ASSMANN WSW components, Hersteller von Standard- und kundenspezifi schen Kühlkörpern, bietet als Weiterentwicklung der Finger- und Kleinkühlkörper
MehrStrangkühlkörper mit Lötstiften Extruded heatsinks with solder pins
Strangkühlkörper mit ötstiften Etruded with solder pins Finger - and U-shaped ttachables Etruded with solderpins with solderpin Etruded standard length h Profiles Retaining Mounting springs accessories
MehrTransistorhalteklammern Retaining springs for transistors
Finger - and U-shaped Attachables with solderpins with solderpin standard length h Profiles Mounting springs accessories accessories Distance spacers Fans Technical explanation 524 ASSMANN WSW components,
MehrCode for Special Contacts Nummernschlüssel für Sonderkontakte
Code for Special Nummernschlüssel für Sonderkontakte Ordering Code Bestellschlüssel Series Features Baureihen-Features FDX-Series FDX-Serie Coaxial contact for cable termination Inner conductor for solder
MehrKurzschlußbrücken / Lötstützpunkte Jumper / Solder terminals
Kurzschlußbrücken / Lötstützpunkte / Solder terminals Cable assemblies D-Sub / Hoods Centronics Kurzschlußbrücken sind kleine Steckbrücken und dienen auf elektronischen Baugruppen zur Konfi guration oder
MehrProzessor Kühlkörper. ASSMANN WSW components, Hersteller von Standardund kundenspezifischen Kühlkörpern, erweitert sein
Prozessor Finger - and U-shaped ttachables with solderpins with solderpin standard length h Profiles Retaining Mounting springs accessories accessories Distance spacers Fans Technical eplanation 472 SSM
MehrTECHNISCHE DATEN SERIE E-L12/ TECHNICAL DATA TYPE E-L12
TECHNISCHE DATEN SERIE E-L12/ TECHNICAL DATA TYPE E-L12 Bauform Einheit D F G H11 H15 HA Type Unit Maximale Polzahl 32 48 64 11 15 10 + 2 Maximum Contacts 7 + 4 Kontaktreihenbezeichnung a c z b d z b d
Mehr336 Wannenstiftleisten RM 1,27mm, gerade/gewinkelt Box Headers, 1.27mm Pitch, Straight/Right-Angled
Technische Daten / Technical Data Isolierkörper Thermoplastischer Kunststoff, nach UL94 V-0 Insulator Thermoplastic, rated UL94 V-0 Kontaktmaterial Messing Contact Material Brass Kontaktoberfläche Vergoldet
MehrUSB Kabelkonfektion USB cabels assembly
USB Kabelkonfektion USB cabels assembly Customized cables Power cords Flat cables D-SUB cables Modular cables USB cables Video- and Audio cables 612 USB - Kabel von ASSMANN WSW components werden in den
MehrPCMCIA IC MEMORY CARD PLUGS & SOCKETS
PCMCIA IC MEMORY CARD PLUGS & SOCKETS G e r m a n y - H o n g K o n g - Ta i w a n - T h e N e t h e r l a n d s - S o u t h A f r i c a - U S A QUALITÄT-DIENSTLEISTUNG-INNOVATION QUALITY - SERVICE - INNOVATION
MehrTechnical Specification. Technische Spezifikation
Technical Technische Technical Schurter s range of "Audio, DC and DIN Connectors" offers a cost effective solution for a wide range of applications. Technische Schurter s Sortiment an Audio, DC und DIN
MehrProduct Description Produktbeschreibung. SMT Steckverbinder
SMT Connectors Product Description Produktbeschreibung Advantages and Special Features This SMT connector was specifically developed for use with fully automatic assembly and solder procedures. The following
MehrSteckernetzteile / Netzkabel / Einbaustecker Power adaptors / powercords / power inlets
Steckernetzteile / Netzkabel / Einbaustecker Power adaptors / powercords / power inlets Cable assemblies D-Sub / Hoods Centronics Multiflex Modular USB Switches Powercords Powerinlets DIN41612 Hardmetric
MehrLow Profile Connectors Steckverbinder mit geringer Einbauhöhe. Product Description Produktbeschreibung
Low Profile Connectors Product Description Produktbeschreibung Advantages and Special Features Low profile desgin for use in appliance with division units Available in sizes 9-way to -way Pin and socket
MehrEN (DIN
Amphenol Amphenol-Tuchel Electronics GmbH Rundsteckverbinder Circular Connectors Rundsteckverbinder entspricht EN 17 5000 (DIN 4 56) Die Rundsteckverbinder der Serie entsprechen den Anforderungen der EN
MehrD-Sub D-Sub. assemblies. Cable. D-Sub / Hoods Centronics DIN Multiflex - Modular USB IEEE1394. Switches Powercords. Powerinlets.
D-Sub D-Sub Cable assemblies D-Sub / Hoods Centronics Modular USB Switches Powercords Powerinlets D-Subminiatur Steckverbinder der ASSMANN WSW components entsprechen in Ihren Abmessungen der DIN 41652.
MehrSMT Connectors SMT Steckverbinder. Ordering Code Bestellschlüssel
SMT Connectors SMT Steckverbinder Ordering Code Bestellschlüssel ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE DS 10/2007 21 Special Features Besondere
MehrD-Sub Dualport Steckverbinder D-Sub dualport connectors
D-Sub Dualport Steckverbinder D-Sub dualport connectors Bestellschlüssel Ordering code ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE 73 Technische Daten
MehrGamme connectique: Ratioplast Electronics
Gamme connectique: Ratioplast Electronics Produktübersicht / Product Overview Empfohlenes Leiterplatten-Layout/ Recommended P.C.B Layout 1,0 mm SMT-Stiftleisten, SMT-Buchsenleisten / SMT-Pinheader, SMT-Female
MehrDistanzmontageteilen. Distance rolls
Distanzmontageteile Distance rolls Finger - and U-shaped Attachables with solderpins with solderpin standard length h Profiles Retaining Mounting springs accessories accessories Distance spacers Fans Technical
MehrProduktbeschreibung. Product description
Produktbeschreibung Seite Low Cost IC-Fassungen,Raster 2.54 mm 188 Low Cost IC-Fassungen,Raster 778 mm 189 Präzisions IC-Fassungen, Raster 2,54 190 Präzisions IC-Fassungen,Wire-Wrap, 17.80 mm 191 Präzisions
MehrKatalog Steckverbinder. Catalog Connectors
Katalog Steckverbinder Catalog Connectors TECHNISCHE DATEN SERIE E-L12/ TECHNICAL DATA TYPE E-L12 Bauform Einheit F H11 H15 Type Unit Maximale Polzahl 48 11 15 Maximum Contacts Kontaktreihenbezeichnung
MehrDualport Connectors. Product Description Produktbeschreibung. Dualport Steckverbinder. Dualport Steckverbinder. Dualport Connectors
Dualport Connectors Product Description Produktbeschreibung Advantages and Special Features Compact connector with dual assembly ( Dualport ) Multiple assembly combinations with various layouts available
MehrLow Profile D-Sub Connectors D-Sub Steckverbinder mit geringer Einbauhöhe
Contact Cambridge Connectors. Phone +44 1223 8641 Email: sales@cambridgeconnectors.com Low Profile D-Sub Connectors D-Sub Steckverbinder mit geringer Einbauhöhe Ordering Code Bestellschlüssel ALL DIMENSIONS
MehrLötstift gewinkelt 90, 9.4 mm Gedrehte Kontakte. 90 Solder pin, 9.4 mm Machined contacts. Stiftleiste Plug connector. Buchsenleiste Socket connector
Lötstift gewinkelt 90, 9.4 mm Gedrehte Kontakte 90 Solder pin, 9.4 mm Machined contacts Stiftleiste Plug connector Buchsenleiste Socket connector A A D D 1 2 3 4 5 5 4 3 2 1 7 8 9 Ø 0. 10 9.4 1.3 max.
MehrDIN Multiflex. assemblies. Cable. D-Sub / Hoods Centronics DIN Multiflex - Modular USB IEEE1394. Switches Powercords.
- Multiflex - Multiflex Cable assemblies D-Sub / Hoods Modular USB Switches Powercords Powerinlets Die Firma ASSMANN WSW components bietet unter der Produktbezeichnung `MULTIFLEX eine breite Produktpalette
MehrLBK 2/11. Lichtbandsystem Continuous Row Lighting System. 11-poliges Lichtbandsystem 11-pole continuous row lighting system
LBK 2/11 Lichtbandsystem Continuous Row Lighting System 11-poliges Lichtbandsystem 11-pole continuous row lighting system Kompakte Ausführung Compact design Vorkonfektionierte Einheiten lieferbar Available
MehrMiniatur Rundsteckverbinder Serie 723 Miniature circular connectors series 723. Kurzinformation Brief information Ü TI
Serie 0 09 0 0 6 60 6 0 6 69 69 69 69 6 6 6 66 0 Miniatur undsteckverbinder Serie Miniature circular connectors series Kabelsteckverbinder Steckverbinder mit Schraubverriegelung nach IEC 0-9 Schutzart
MehrHochstromkontakte High Power Contacts
Hochstromkontakte High Power Contacts Technische Daten Technical Data Mechanische Daten Mechanical Data Steckkraft (Kontaktpaar) Mating force (pair of contacts) Ziehkraft Unmating force Temperaturbereich
MehrÜBERSICHT STECKVERBINDER PRODUCT GUIDE CONNECTORS
ÜBERSICHT STECKVERBINDER PRODUCT GUIDE CONNECTORS G e r m a n y - H o n g K o n g - Ta i w a n - T h e N e t h e r l a n d s - S o u t h A f r i c a - U S A QUALITÄT-DIENSTLEISTUNG-INNOVATION QUALITY -
MehrSonderstecker / Special connectors
Sonderstecker / Special connectors Vorwort: Auf den nachfolgenden Seiten möchten wir Ihnen eine Auswahl an Sondersteckern präsentieren die nach Kundenvorgaben und deren spezielle Anwendungen entstanden
MehrD-Sub Dualport Connectors D-Sub Dualport Steckverbinder
Contact Cambridge Connectors. Phone +44 1223 841 Email: sales@cambridgeconnectors.com D-Sub Dualport Connectors D-Sub Dualport Steckverbinder Ordering Code Bestellschlüssel 88 DS 1/27 Technical Data Technische
MehrProduct Description Produktbeschreibung
THT/THR Connectors Product Description Produktbeschreibung Advantages and Special Features Our THR (Through Hole Reflow) connectors were specifically designed for the SMT manufacturing process. The basis
MehrM5 Steckverbinder M5 connectors
R BF-C BF-B BF-A 7/8 M18 M1-US M1-D M1-B Verteiler VL M1-A M8 RD0 RD M5 Bajonett M M16 P67 M16 P0 PP P67 Bajonett S P67 M9 P67 M9 P0 PP P67 MPP P67 Bajonett S P67 S P0 T Ü 1 binder Steckverbinder connectors
MehrHigh Density D-Sub Steckverbinder
High Density D-Sub Steckverbinder High Density D-Sub Connectors Die High Density D-Sub Steckverbinder von Provertha sind mit gedrehten Kontakten, Metall- Gehäuse in -Version mit Schirm-Feder- Kontur und
MehrTaster gerade - Einlöt / SMT / Kappen Straight Tact Switches - Solder-in / SMT / Caps
Technische Daten /Technical Data Gehäuse/Abdeckung/Hebel Thermoplastischer Kunststoff, nach UL94 V-0 Rostfreier Stahl Thermoplastischer Kunststoff, nach UL94 V-0 Case/Cover/Actuator Thermoplastic, rated
MehrDVI - STECKVERBINDER DVI - CONNECTORS
DVI - STECKVERBINDER DVI - CONNECTORS G e r m a n y - H o n g K o n g - Ta i w a n - T h e N e t h e r l a n d s - S o u t h A f r i c a - U S A QUALITÄT-DIENSTLEISTUNG-INNOVATION QUALITY - SERVICE - INNOVATION
MehrM5 Steckverbinder M5 connectors
R BF-C BF-B BF-A 7/8 M8 M-US M-D M-B Verteiler VL M-A M8 RD0 RD M5 Bajonett M M6 M6 P0 PP Bajonett S M9 M9 P0 PP MPP Bajonett S S P0 T Ü binder Steckverbinder connectors Kabelsteckverbinder Rundsteckverbinder
MehrHigh Density D-Sub Crimp Connectors High Density D-Sub Crimp Steckverbinder
High Density D-Sub Crimp Connectors High Density D-Sub Crimp Steckverbinder Technical Data Technische Daten Mechanical Data Mechanische Daten Shell Gehäuse Insulator Isolierkörper Signal contacts Signalkontakte
MehrMINI 1-Conductor/1-Pin Receptacle Terminal Blocks; 2-Conductor/2-Pin Receptacle Terminal Blocks, Series 2020
X-COM @-SYSTEM MINI 1-Conductor/1-Pin Receptacle Terminal Blocks; 2-Conductor/2-Pin Receptacle Terminal Blocks, Series 2020 0.14 1 (1.5) mm 2 AWG 24 16 500 V/6 kv/3 1 13.5 A* 0.14 1 (1.5) mm 2 AWG 24 16
MehrPolzahl
Lötstift gewinkelt 90, 9.4 mm (FP) Gedrehte Kontakte 90 Solder pin, 9.4 mm (FP) Machined contacts Stiftleiste Plug connector Buchsenleiste Socket connector 12.4 0.9 6 Ø0.6 1 6 2 A B 4 5 7 8 9 C 10 1.max.
MehrDIN-Rundsteckverbinder DIN circular connectors Connecteurs circulaires DIN
0103 DIN-Einbaukupplung, geschirmt, mit Verriegelung, Metallgehäuse, Flansch und Lötanschlüssen Kontaktträger, V0 nach UL 94 Kontaktfeder Massekontaktfeder Cu, vernickelt DIN-Steckern 0131, 0137, S, XS
Mehr6 FME FME. 140 Telegärtner Web: Tel: +49-(0) / Fax: +49-(0) /
6 Contents 6.1 Straight Plug Crimp................ 143 6.2 Press-In Bulkhead Receptacle, male... 143 6.3 Straight Jack Crimp................ 143 6.4 Bulkhead Plug.................... 144 6.5 Adaptor........................
MehrDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Construction Round varistor element, leaded Coating: epoxy resin, flame-retardant
MehrDatenblatt. P-series PDU 2.5/4/4AN
Turn five into three that's the winning formula of the new P series with the PUSH IN connection system in which the pitches for 2.5, 4, 6 and 10 mm² are each combined in one terminal block. That means
Mehrmm 1 mm mm 2 mm 3 P V
Core B6553 In accordance with IEC 6033 Pot cores are supplied in sets Magnetic characteristics (per set) Σl/A l e A e A min V e with center hole,0 5,9 5,9 252,0 Approx. weight (per set) without center
MehrProtection modular systems for DIN rail and 60mm busbar system DIN-Hutschienen-und 60mm Sammelschienenkomponenten
Protection modular systems for DIN rail and 60mm busbar system DIN-Hutschienen-und 60mm Sammelschienenkomponenten 2 Contents / Inhaltsverzeichnis Page Seite 1 2 60mm Classic Busbar System / 60mm Classic
MehrZÜNDSTARTSCHALTER IGNITION STARTER SWITCHES
ZÜNDSTARTSCHALTER IGNITION STARTER SWITCHES Zündstartschalter 32 70.. / 32 73.. / 32 74.. und Varianten Der Zündstartschalter mit Einklinkzylindern ist in drei verschiedenen Schaltvarianten lieferbar.
MehrM12 Steckverbinder US-Kodierung M12 connectors US-coded
R BF-C BF-B BF-A 7/8 M18 M12-US M12-D M12-B Verteiler M12 PP VL M12-A M8 M5 RD0 RD24 M25 Bajonett M2 M16 IP67 M16 IP40 PP IP67 Bajonett SI IP67 M9 IP67 M9 IP40 PP IP67 Bajonett SI IP67 SI IP40 TI Ü binder
MehrMicro-RF. 294 Rosenberger Hochfrequenztechnik GmbH & Co. KG, Germany, Phone +49 (0) ,
Micro-RF components can be used up to 6 GHz in various wireless applications, e. g. cellular and cordless phones, Bluetooth and wireless LAN applications, PDAs (Personal Digital Assistants) or wireless
MehrM12 Automatisierungstechnik - Sonder - US-Kodierung M12 Automation Technology - Special - US-Coding
665 Sonder Sensor 815 866 M12 Automatisierungstechnik - Sonder - US-Kodierung M12 Automation Technology - Special - US-Coding Kabelsteckverbinder Schraubverriegelung nach DIN EN 61076-2-101 Schutzart IP67/IP68
MehrElectrical tests on Bosch unit injectors
Valid for Bosch unit injectors with order numbers 0 414 700 / 0 414 701 / 0 414 702 Parts Kit Magnet*: - F00H.N37.925 - F00H.N37.933 - F00H.N37.934 * For allocation to the 10-place Bosch order number,
MehrVerbindungsleitungen Serie 765 Connecting cables series 765. Kurzinformation Brief information Ü TI
Serie Verbindungsleitungen Serie onnecting cables series Kurzinformation rief information 70 7 72 79 2 25 0 58 72 62 69 69 69 7 78 7 76 7 75 85 steckverbinder Verbindungsleitungen der steckverbinder von
MehrCleanroom Fog Generators Volcano VP 12 + VP 18
Cleanroom Fog Generators Volcano VP 12 + VP 18 Description & Functional Principle (Piezo Technology) Cleanrooms are dynamic systems. People and goods are constantly in motion. Further installations, production
MehrEdelstahl-Druckminderventil Stainless Steel Pressure-Reducing-Valve
Edelstal-Druckminderventil Typ 7 Standard: Voll-Edelstal-Ausfürung, gescmiedetes Ventilgeäuse Entlasteter Ventilkegel, vordruckunabängig Dictscließend bei -Verbrauc Kolbensteuerung dämpfbar bis 14 C Oberfläcengüte
MehrLötstift gewinkelt 90, 9.4 mm Gedrehte Kontakte. 90 Solder pin, 9.4 mm Machined contacts. D-Subminiatur Combi Steckverbinder
Lötstift gewinkelt 90, 9.4 mm Gedrehte Kontakte 90 Solder pin, 9.4 mm Machined contacts Stiftleiste Plug connector Buchsenleiste Socket connector A A B 0.9 6 Ø0.6 D C 10 1.3 max. 10.6 9.4 E Gehäuse-Nr.
MehrHSI-MP Metalarc SA HSI-MP 100W CO 3K E27 SLV PRODUCT OVERVIEW DATENTABELLE. Optische Daten
Range Features A family of metal alide lamps specially designed for open and enclosed fixtures Lamps can directly replace Hig Pressure Sodium lamps to turn yellow installations to wite ligt, simply by
MehrP 4,6 4,1. Magnetic characteristics (per set) Σl/A = 2,6 mm 1 l e = 7,6 mm A e = 2,8 mm 2 V e = 21,3 mm 3. Approx. weight 0,17 g/set.
Core B65495 Miniature pot cores for adjustable miniature inductors One of the two cores is equipped with an internal thread for the adjusting screw The unit can be fixed to the terminal carrier by glue
MehrDGR CE SICHERHEITSVENTILE PED CE SAFETY VALVES
DGR CE SICHERHEITSVENTILE PED CE SAFETY VALVES Ecksicherheitsventile aus Rotguss mit Nirofeder Typ 606 GF/GFL/tGF für neutrale Flüssigkeiten,Dampf und gasförmige Medien Safety valves made of red brass
MehrOrder number: Bestellnummer:
The front page illustration is an exploded view of a connector according to EN 60603-2: Type M/2 with 12 signal contacts Female connector, wire wrap termination, length 13 mm (0.511 ) Performance class
MehrM8 Type M8/M12 distribution boxes with terminal contacts. Serie M8 M8/M12 Verteiler-Boxen mit Anschlussklemmen. M8/ M12 Verteiler-Boxen
M Type M/M distribution boxes with terminal contacts Serie M M/M Verteiler-Boxen mit Anschlussklemmen M/M distribution boxes M/ M Verteiler-Boxen PRODUCT M distribution boxes housing colour: black, yellow,
MehrEMV-Bauelemente EMC Components
EMV-Bauelemente EMC Components SIMIDs werden für die nieder- und hochfrequente Entkopplung von Signal- und Steuerkreisen sowie zum Aufbau von Schwingkreisen eingesetzt. Typische Anwendungsgebiete sind:
MehrLIF & ZIF STECKVERBINDER LIF & ZIF CONNECTORS
LIF & ZIF STECKVERBINDER LIF & ZIF CONNECTORS G e r m a n y - H o n g K o n g - Ta i w a n - T h e N e t h e r l a n d s - S o u t h A f r i c a - U S A QUALITÄT-DIENSTLEISTUNG-INNOVATION QUALITY - SERVICE
MehrCompactPCI Steckverbinder gemäß PIGMG 2.0 Rev. 3.0
CompactPCI Steckverbinder gemäß PIGMG.0 Rev. 3.0 Allgemein Die PCI Industrial Computer Manufacturers Group (PICMG) hat Ende 1999 die neue Revision 3.0 der CompactPCI Core Spezifikation vorgestellt. Die
MehrCK und MK Gehäuse Größe Kunststoff C-TYPE
CK und MK Gehäuse Größe 21.21 Kunststoff C-TYPE CD... 7 polig + m 53 gewinkelte Ausführung i Einsatzgröße: Beschreibung Artikelbezeichnung Artikelbezeichnung Artikelbezeichnung (Kabelausgang - Pg 11) (Kabelausgang
MehrSMC, 50 Ω. Features. Product Range
I I 11SMC, 50 Ω Interface Dimensions SMC, 50 Ω Code 39 REFERENCE PLANE Referenzebene REFERENCE PLANE Referenzebene L F G D F D B A E C H K H C E A B MALE Stecker FEMALE Kuppler G SMC, 50 Ω Male Stecker
MehrWaterproof Connector Systems Wasserdichte Steckverbindersysteme
Waterproof Connector Systems Wasserdichte Steckverbindersysteme Ordering Code for Waterproof Connectors Bestellschlüssel für wasserdichte Steckverbinder UL Recognized File No. E168813 The waterproofness
MehrÜBERSTRÖMVENTILE OVERFLOW VALVES. Type 618 T / Type 619 E for liquids, steam and gaseous media
ÜBERSTRÖMVENTILE UND REGELVENTILE OVERFLOW VALVES AND CONTROL VALVES Überström-/Regelventile aus Rotguss mit Nirofeder Overflow/control valves made of red brass with stainless steel spring Typ 618 T /
MehrSteckvorrichtungen mit Flachkontakten. Flat blade contact connectors
Steckvorrichtungen mit Flachkontakten Die Flachkontakt-Steckvorrichtungen von REMA erfüllen die Anforderungen der Europäischen Norm EN 1175-1 und dadurch über die ermutungswirkung auch die der Maschinenrichtlinie
MehrI99 20 I4 JAHRE ORM SHORT
20 I4 I99 JAHRE SHORT ORM W+P PRODUCTS November 2014 Seit jetzt mehr als 20 Jahren versorgen wir die Elektronik- für die meisten Anwendungen eine kosteneffektive, qualitativ hochwertige Verbindungslösung
MehrSteckerleisten. Connector Strips TK-35 TK-300 TK-160-SQ TK-1250-SQ TK-35 TK-300 TK-160-SQ TK-1250-SQ. Technische Hinweise. Technical information
Werkzeugwechsler -Serie Tool Changer Series 41 Steckerleisten -35-300 -160-SQ -1250-SQ Die folgenden Seiten enthalten eine unserer am häufigsten eingesetzten Steckerleisten für die -35 bis -300 Serie und
MehrCatalog ZEBO Praezisionswerkzeuge Hermann Pfisterer GmbH. PO Box 1631 D Bietigheim-Bissingen. Schleifmuehle 7 D Bietigheim-Bissingen
Catalog 2016 ZEBO Praezisionswerkzeuge Hermann Pfisterer GmbH PO Box 1631 D 74306 Bietigheim-Bissingen Schleifmuehle 7 D 74321 Bietigheim-Bissingen Telefon +49 (0) 7142 / 920050 Telefax +49 (0) 7142 /
MehrWith your design proposals or our available simulation and calculation programs, our R&D department realizes and delivers quick solutions.
HAHN offers solutions for product developers of switching power supplies. In response to the variety of designs which are available on the market, HAHN combines demands and wishes of the developers to
Mehr