Prüfurkunde - Test Certificate

Größe: px

Ab Seite anzeigen:

Download "Prüfurkunde - Test Certificate"

Karoline Weiß
vor 6 Jahren
Abrufe

1 Typprüfung - Type Test RC-AT EM EA PRO D Prüfurkunde - Test Certificate DO-2201 Bin. Ausg.Trans 40x1,24-60VDC DO-2201 Dig. Output Trans 40x1,24-60VDC BA2-201-A 6MF10110CC010AA0CC Elektrische Sicherheit / Isolation - Electrical safety / Isolation Prüfung - Test: Safety requirements - Norm - Standard: IEC :2010 Prüfung - Test: Isol. Wechselspg. - Dielectric test Norm - Standard: IEC :2010 Prüfung - Test: Isol. Stoßspg. - Impulse voltage test Norm - Standard: IEC : BC2_TÜV Elektromagnetische Verträglichkeit - Electromagnetic compatibility Prüfung - Test: Störfeldstärke - Emission Norm - Standard: CISPR 22:2008 Prüfung - Test: Imm. ESD - ESD immunity Norm - Standard: ÎEC :2008 Prüfung - Test: Imm. HF-Feld - EM field immunity Norm - Standard: IEC :2006 Prüfung - Test: Imm. Burst - Burst immunity Norm - Standard: IEC :2012 Prüfung - Test: Imm. Surge 1,2/50 - Surge imm. 1,2/50μs Norm - Standard: IEC :2005 Prüfung - Test: Imm. HF induziert - Cond. dist. immunity Norm - Standard: IEC :2013 Prüfung - Test: Imm. Magnetfeld 50Hz - HF 50Hz immunity Norm - Standard: IEC :2009 Prüfung - Test: Imm. Magnetfeld Puls - Magn. pulse immunity Norm - Standard: IEC :1993 Prüfung - Test: Imm. 1MHz gedämpft - Oscillatory waves Norm - Standard: IEC :2006 Prüfung - Test: Imm. comm mode dist - Imm. comm mode dist Norm - Standard: IEC :1998 Umweltprüfungen - Environmental testing Prüfung - Test: Environm. conditions - Environm. conditions Norm - Standard: IEC :1996 Prüfung - Test: Klima - Climatic test Norm - Standard: IEC x: Prüfung - Test: Fc: Schwingen - Vibrations Norm - Standard: IEC : sys-s68_AIT sysA-S30_ sys-s68_AIT Siemens AG Österreich RC-AT EM Energy Automation Products Development Prüfer - Tested by: Wien - Vienna, Geprüft - Reviewed by: Page 1 of 2 Name / Unterschrift - Signature Name / Unterschrift - Signature

2 RC-AT EM EA PRO D Typprüfung - Type Test Prüfurkunde - Test Certificate DO-2201 Bin. Ausg.Trans 40x1,24-60VDC BA2-201-A DO-2201 Dig. Output Trans 40x1,24-60VDC 6MF10110CC010AA0CC Prüfung - Test: Fc: Schwingen - Vibrations Norm - Standard: IEC :1991 Prüfung - Test: Ea: Schock - Shock Norm - Standard: IEC : sys-s68_AIT sys-s68_AIT Der Prüfgegenstand hat die Prüfungen bestanden. Nach Abschluss der Prüfungen waren die Eigenschaften unverändert und der Prüfgegenstand voll funktionsfähig. The equipment has successfully passed the type test. The equipment did not show any changes and was fully in order subsequent to these tests. Siemens AG Österreich RC-AT EM Energy Automation Products Development Schachinger Michael Prüfer - Tested Digitally by: signed by Schachinger Michael DN: serialnumber=z001v63n, givenname=michael, sn=schachinger, o=siemens, cn=schachinger Michael Name / Unterschrift - Signature Date: :36:26 +02'00' Wien - Vienna, Geprüft - Reviewed by: Name / Unterschrift - Signature Page 2 of 2 Digitally signed by Stern Peter DN: serialnumber=z001muxe, givenname=peter, sn=stern, o=siemens, cn=stern Peter Date: :17:20 +02'00'

13 Report Project Designation Vibration- and Shocktests on SICAM AK Client Siemens AG Österreich Sector Energy Division Power Distribution zh. Herrn Herbert Stefl Ruthnergasse Wien, Österreich Order from / No / Stefl Project number Test Engineer Wolfgang Schinhan Date of issue Total number of issues / No 1 / 1 Number of pages 20 Annex: number of pages - The results relate exclusively to the terms tested. This report may only be reproduced or published in full, without omissions, alterations or additions. The reproduction or publishing of extracts from this report require the written approval of the research center.. AIT Austrian Institute of Technology GmbH 1210 Vienna, Giefinggasse 2, Austria T +43 (0) Court of jurisdiction Vienna FN: i HG Wien UID: ATU ISO 9001:2008-Certified Bank details: Erste Bank der Österreichischen Sparkassen AG Account No.: BLZ: IBAN AT BIC: GIBA AT WW

15 Figure 1: Test-Modules Test equipment Electrodynamic Vibration Exciter System LDS V864 HT-440 Date of delivery: 4. September 2013 Date of tests: 4. September 5. September 2013 Test Result The sample has passed the environmental tests vibration and shock as listed in the Summary. Project No Page 3 of 20

16 Department: IC-SG EA PRO D Tested by / on: H.Stefl / Released by / on: G.Bergmann/ File: 2sysA-S30_00.doc Re: TEST REPORT Environmental Testing Cold / Dry Heat / Damp Heat Report no.: 2sysA-S30_00 Account / Request no.: S Issued in / on.: Vienna, Product: AI-2300, DO-2201, DO-2210/11 Sheet: 1 Sheets: 9 1. Requirements and Standards Applied Test requirement acc. to: Type test specification TTS_Successor80251_V1_08.doc Test setup and execution were to comply with the following test standard: IEC ( ) Environmental testing - Part 2: Tests; Tests A: Cold (EN : ) IEC ( ) Basic environmental testing procedures - Part 2: Tests; Tests B: Dry heat (= EN : ) IEC ( ) Environmental testing - Part 2-30: Tests; Test Cab: Damp heat, cyclic (12h) (= EN : ) 2. Summary of Test Result The modules AI-2300, DO-2201, DO-2210/11 have passed the environmental test according to the test requirement when subjected to cold (-5 C), damp heat (55 C/93 and 97%rH) and dry heat (55 C/ 10%rH). Clause of TTS Test Severities Result Environmental testing Part 2-2: Tests -Test B: Dry heat Environmental testing Part 2-1: Tests -Test A: Cold Environmental testing Part 2-30: Tests -Test Db: Damp heat, cyclic (12h) IEC C/10% for 15h IEC C for 12h IEC C/93% for 12h Okay Okay Okay Copyright by SIEMENS Vienna

Ähnliche Dokumente

Prüfurkunde - Test Certificate

Typprüfung - Type Test RC-AT EM DG PRO D Prüfurkunde - Test Certificate PS-8622 Stromversorgung 110-220VDC 12W PS-8622 Power Supply 110-220VDC 12W 6MF28622AA00BB 6MF28622AA00BB Elektrische Sicherheit /