KESEL Quality Vises Investing in the Future
|
|
- Hede Ursler
- vor 7 Jahren
- Abrufe
Transkript
1 KESEL Quaity Vises Investing in te Future NEW Jaw widt
2 KESEL Quaity Vises Investing in te Future KESEL-CNC Hig pressure macine vise Standard wit step jaws for arger camping ranges Wit additiona camping range Treaded oes to fasten intercangeae camping jaws (see accessories) Rugged ody from noduar cast iron GGG 60, precision ardened and ground guide ways Bayonet system for quick spinde remova Treaded oes for work piece stop on eiter side Spring punger for quick parae cange system Precise seection of camping force In standard design wit ongitudina and cross keyways Ø 20 H7 ( ) for aignment on te macine ed. CNC 125 (5 ) in standard version wit 2 precision oes Ø 25 H6 ( ) for accommodation on zero point camping systems (for CNC 160 (6 )) upon request. Wit attaced anguar drive
3 Disassemy of te spinde witout toos in a few seconds ony oosening of two side screws manuay turning of te front pate y 90 (ayonet system) puing of te compete spinde unit est ceaning possiiity / est possiiity for mounting te vise troug te center mecanica-ydrauic spinde, competey encosed, resistant to wear and maintenance free Indispensae for production quick cange paraes quick cange paraes are simpy cicked witout toos no cip penetration under te quick cange paraes even wen using compressed air safe and firm camping avaiae in different eigts (see accessories) Quick jaw cange system to e opened wit one turn oosening of 2 screws (one revoution ony) jaw can e turned y 180, or specia jaws can e mounted tigten ot screws and simpy continue to work simpy make your own specia jaws since te interface etween ody and jaw does not require a key way connection.
4 KESEL-CNC Hig Pressure Macine Vise mecanic-ydrauic Horizonta appication Guideways are ardened and precision ground compete ase pate ground side and face surface mied Mounting from a sides Guideways are ardened and precision ground compete ase pate ground Bot sides and te end face are precision ground 4 treaded oes M12 on te face side additiona 20 H7 on te face for aigning vertica attacments Deivery: in ground ase wit 1 fixed and 1 movae step jaw inc. 4 toe camps for mounting to macine ase inc. 1 x manua crank inc. 1 x operating instructions competey packed NEW Jaw widt
5 5 mm deep Size Order no. for orizonta appication Order no. for operating in 3 eves Body widt Camping range Camping force in S1 S2 s Weigt in kg ±0, L1 L2 L3 L4 L5 L6 L7 L , ,5 157, , ,5 233,5 Dimensions in mm. Suject to cange!
6 4 x 90 Star-Arrangement CNC 125 & 160 NEW te 4 x 90 arrangement offers est accessiiity of te miing ead on 3 sides. compared to one-piece ock designs te star-arrangement can e easiy adapted to meet specia requirements. ig viration dampening troug te ases made from noduar cast iron GGG 60 te ases made to requirement aow for a mounting of attacments to DIN and JIS macine eds. te two-piece version of star and ase pate can e reworked in case of a coision. Deivery incudes: 4 x KESEL-CNC ig pressure macine vise equipped wit step jaws inc. ase pate inc. 1 x manua crank competey mounted packed in a wooden crate We aways offer te est soution for your specia requirements. Fast Precise Low Cost
7 2 x 180 Arrangement CNC 125 & 160 NEW te 2 x 180 arrangement offers est accessiiity of te miing ead on 3 sides. can e easiy adapted to meet specia requirements. witout atera toe camps ig viration dampening troug te ases made from noduar cast iron GGG 60 te ases made to requirement aow for a mounting of attacments to DIN and JIS macine eds. te two-piece version of star and ase pate can e reworked in case of a coision. Deivery incudes: 2 x KESEL-CNC ig pressure macine vise equipped wit step jaws inc. ase pate inc. 1 x manua crank competey mounted packed in a wooden crate We aways offer te est soution for your specia requirements. Fast Precise Low Cost
8 Accessories for KESEL-CNC Hig Pressure Macine Vises Dimension drawing of te oe patterns of a intercangeae Size 1 a , ,0 a Smoot camping jaw, soft(1.2842) mied, for manufacturing form jaws Camping jaw wit ongitudina grooves for a firm grip on te work piece 1 1 Size 1 Order no. Smoot camping jaw, soft Order no. Camping jaw wit ongitudina Size 1 kg ,2 0, ,2 0,95 Smoot camping jaw, stepped Hardened and ground, for eiminating te paraes Size 1 Order no. 1 1 kg ,2 0, ,2 0, ,2 0,89 Dimensions in mm, suject to cange!
9 Accessories for KESEL-CNC Hig Pressure Macine Vises Vee-jaw wit orizonta prism 120, ardened and ground. Sonderzueˆr Hocdruckmascinenscraustock Size 1 Order no. wit 1 Jaw wit 2 Jaws , , Prismenacke ,2 ge rtet 31 und gesciffen 26 mit waagerectem Prisma 62 1,33 1 Jaw 2 Jaws kg 120 Gr ˆfe Beste-Nr Vee-jaw wit orizonta and vertica prism 90, ardened and ground Prismenacke 120, erˆt ge 1 1 Size 1 Order no. wit wit Gr ˆfe Beste-Nr. 1 Jaw 2 Jaws ,2 19,6 28, , ,2 24,6 32, , Jaw 1 Gr ˆfe Pendespannacke mit gattem Pendest ck Size 1 Order no. 1 1 kg Gr ˆfe Beste-Nr ,2 30 1, ,2 40 2, Jaws kg Foating jaw wit smoot foating insert, ardened and ground.... for camping of conica work pieces Niederzugacke mit Backenater gatte Backen Gr ˆfe Backenater Beste-Nr. Wecseacke Beste-Nr Dimensions in mm, suject to cange!
10 Accessories for KESEL-CNC Hig Pressure Macine Vises Pu-down jaws wit repacement jaw Te work piece is ed securey and pressed against te ocating face. Size 1 Order no. 1 kg ,2 15 0, ,2 20 1,1 1 Pu-down jaws for anks, wit integrated spring ade for camping of anks. Te spring ades suppy secure oding and deep pu effect. Size 1 Order no. 1 1 kg , Repacement spring ades can e purcased individuay, see price ist order no Manua crank, standard design, wit snap ring to avoid disengagement caused y macine virations. Size Order no. A B kg , ,35 Manua crank, sort design, to e used instead of te standard crank wen te macine tae does not offer sufficient cearance. suitae for ow camping forces for fast adjustment of te camping widt Size Order no. A B kg , ,36 Dimensions in mm, suject to cange!
11 Accessories for KESEL-CNC Hig Pressure Macine Vises Universa fixed and movae jaws wit ange setting possiiity, ardened and ground Size Order no. L Anguar drive for ig pressure macine vise Kese CNC, witout manua crank For size Order no. kg , ,20 Work piece stop, adjustae For Size Order no. Tread kg M 12 0, M 16 1,50 Meta seet cover For size Order no. kg , ,70 Quick cange paraes For size Order no. eigt Dimensions in mm, suject to cange! For size Order no. eigt
12 Georg Kese GmH & Co. KG Werkzeugmascinen Spannsysteme Karrerstraße Kempten Germany Fon: Fax: info@kese.com
Elektrostecker und Gehäuse. Electrical Connectors and Housings
Eektrostecker und Geäuse Eectrica Connectors and Housings Eektrostecker und Geäuse Eectrica Connectors and Housings Wir iefern steckerseitig fertig eareitete Kaegeäuse aus formstaiem und temperatureständigem
MehrARNO-Hochdruck-Maschinenschraubstock Grundkörper: schmale Ausführung
ARNO-Hocdruck-Mascinenscraustock Grundkörper: scmae Ausfürung 04.10 a d Kraftgeer: mecanisc-ydrauisc die Spannkrafteinsteung erfogt üer eine Rienmarkierung (a), die je Ring etwa 10 kn entsprict. der Spannkraftaufau,
MehrAX/PS AX/PS. Werkbankschraubstock Workbench vice. Bewährt, robust und verschleissfrei. Proven, robust and wear-resistant
AX/PS AX/PS Werkbankschraubstock Workbench vice Bewährt, robust und verschleissfrei Aus dauerhaftem Sphäro- oder Spezialguss, mit gehauenen, glatten oder Prisma-Backen. Für jede Spannaufgabe, unterwegs,
MehrMTC Zubehör Accessories
Standard-Stufenbacken, SSB für die Anwendung als Zentrischspanner und Spanner mit fester Backe Standard Step Jaws, SSB when using the device as a centric clamping vise or with a fixed jaw Bezeichnung Description
MehrZahnstangen geschliffen, gerade & schräg Racks Ground, Straight & Helical Seiten pages B 3 - B 6
Zahnstangen Racks Lagerprogramm Stock Programme Inhalt Content Zahnstangen geschliffen, gerade & schräg, Verzahnungsqualität 5 - NEU Racks Ground, Straight & Helical, Toothing Quality 5 - NEW Seiten pages
MehrZahnstangen vergütet, gerade & schräg Racks Quenched and Tempered, Straight & Helical
Zahnstangen Racks Lagerprogramm Stock Programme Inhalt Content Zahnstangen geschliffen, gerade & schräg, Verzahnungsqualität 5 - NEU Racks Ground, Straight & Helical, Toothing Quality 5 - NEW Seiten pages
MehrPIRANHA CLAMP ZENTRUMSPANNER CENTERING VISE. Die patentierten The patented
Höchste Spannkraft dank Führungssäulen Highest clamping force due to the gliding bars Kein Vorprägen No pre-clamping Beste Qualität und Genauigkeit Best quality and accuracy Minimalster Materialverlust
MehrAttenuator and Distribution System Zehnder ComfoWell 220
Benefits All air treatment functions available: attenuator, fine filter, active carbon filter, manifold box Modular design Compact dimensions Easy to clean Components connected with sliding profiles for
MehrKomponenten-Systeme Components systems WINKEL-Rollen WINKEL Bearings. WINKEL-Rolle Axialrolle fest. WINKEL Bearing axial bearing fixed
Komponenten-ysteme omponents systems WINKL-Rollen WINKL earings WINKL-Rolle xialrolle fest Nacscmierbarkeit für Rollen.0 -.06 WINKL earing axial bearing fixed Relubrication only for types.0 -.06 bb. exemplarisc
MehrUnsere Leistungen im Überblick
Unsere Leistungen im Überblick Beschläge für Hobel- und Werkbänke Workbench vises Arbeitstische und Werkbänke Worktables and workbenches Reinigungsgeräte Cleaning equipment Anlagen für den Holzleimbau
MehrPneumatic linear actuator - series MSR with cylinder Pneumatischer Linearantrieb Serie MSR mit zylinder
Technische Eigenschatften: - Range of operating pressure: 2-8 bar - Accuracy repeability: 0.05mm with adjustable stroke - Operating temperature: 5 C to 60 C - Operating system: through internal cylinder
MehrTitelmasterformat Object Generator durch Klicken bearbeiten
Titelmasterformat Object Generator durch Klicken bearbeiten How to model 82 screws in 2 minutes By Pierre-Louis Ruffieux 17.11.2014 1 Object Generator The object generator is usefull tool to replicate
MehrEx solenoid interlocks // Ex AZM 415
Features/Options Ex zone 1 and 21 Special version up to +90 C ambient temperature for dust Ex zone 21 available (HU) Two Ex switch inserts in one enclosure Spring-to-lock or power-to-lock principle Problem-free
Mehrdirektgesteuert direct acting
1 direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Kolbenventil Nennweite
MehrZellpuffer Cellular buffers
Zellpuffer Cellular buffers Zellpuffer Cellular buffers Zellpuffer von transprotec zeicnen sic bei größeren Federwegen durc ein oes Arbeitsaufnamevermögen aus. Eigenscaften wie günstige Verzögerungswerte
MehrPreisgünstige Aluminiumgehäuse / low-cost aluminium cases
Preisgünstige Aluminiumgehäuse / low-cost aluminium cases GOGABOX GBPALU-S Aluminiumgehäuse sandgestrahlt / sandblasted aluminium cases Führungsnuten für Printplatten / guide grooves for PCB Befestigungsschrauben
MehrAttenuator and Distribution System Zehnder ComfoWell 520
Attenuator and Distribution System Zehnder ComfoWell 520 Benefits All air treatment functions available: attenuator, fine filter, active carbon filter, manifold box Modular design Compact dimensions Easy
MehrFeststell-Rollen kg
R 74 Feststell-Rollen 40 800 kg Höhenverstellbare und rollbare Maschinen-Stützfüße! FSR/600/1 FSR/600/3 FSR/RF/600/3 Maschinen-Transportfahrzeuge und Hebegeräte finden Sie ab der Katalog-Seite T 32. Räder:
MehrManual Positioning Systems
M anue l l e Po si tio n iers y s t e me Manual Positioning Systems Linearversteller LT...4-4 linear translation stages LT Kreuztische MT...4-5 XY translation stages MT Hubtische HT...4-6 vertical translation
Mehr2/2-Wege Kunststoff-Magnetventil 2/2-way plastic solenoid valve. Baureihe 135 Type 135
zwangsgesteuert, flüssigkeitsgedämpft force pilot operated, fluid-damped Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Bauart Nennweite DN 15 50 Druckbereich Gehäusewerkstoff
MehrZehnder ComfoWell 220
Benefits All air treatment functions available: attenuator, fine filter, active carbon filter, manifold box Modular design Compact dimensions Easy to clean Components connected with sliding profiles for
MehrERHARD is a company of. Datasheet ERHARD ECR check valve
ERHARD is a company of Datasheet The compact check valve for clamping The is clamped between two flanges as a reflux preventer. It has two vanes which, for example, open on starting a pump and will iediately
MehrWalter Buchmayr Ges.m.b.H.
Seite 1/10 Chapter Description Page 1 Advantages 3 2 Performance description 4 3 Settings 5 4 Options 6 5 Technical data 7 6 Pictures 8 http://members.aon.at/buchmayrgmbh e-mail: walter.buchmayr.gmbh@aon.at
MehrZehnder CLD. Housing for walls, floors and ceilings
Benefits Suitable for wall, floor or ceiling installation Air volumes up to a maximum of 30 m 2 /h (ComfoTube 75) and 45 m 2 /h (ComfoTube 90) Can be installed in timber or solid constructions Extract
MehrUNW TU / TUH / TUHW. Rückwärtssenksystem TU Reverse counterbore system TU. Vorteile: Advantages: max. 2,5 x d GG(G) ALU NE ST(AHL)
UNW TU / TUH / TUHW max. 2,5 x d GG(G) ALU NE ST(AHL) Rückwärtssenksystem TU Reverse counterbore system TU für manueen Werkzeugwechse manuay operated Vorteie: Manuee Rückwärtsbearbeitung Stirnsenken, Aufbohren
Mehr2/2-way solenoid valve - Type 218
- direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Sitzventil Nennweite
MehrUNW TU / TUH / TUHW TU / TUH / TUHW. Rückwärtssenksystem TU Reverse counterbore system TU. Vorteile: Advantages: max. 2,5 x d GG(G) ALU NE ST(AHL)
TU / TUH / TUHW UNW TU / TUH / TUHW max. 2,5 x d GG(G) ALU NE ST(AHL) Rückwärtssenksystem TU Reverse counterbore system TU für manueen Werkzeugwechse manuay operated Vorteie: Manuee Rückwärtsbearbeitung
MehrDrehmoment-Einstellwerkzeuge Torque adjustment tools
Drehmoment-Einstewerkzeuge Torque adjustment toos G-GE Für Schnewechse-Einsätze. Zum Einsteen und Überprüfen der Sicherheitskuppung For quick change adaptors to adjust and check the safety cutch. For Adaptors
MehrZentrischspanner KZS-P KZS-PG. Spannzeuge - Chucking tools. pneumatisch betätigt Air operated Centering Vices
www.roehm.biz Spannzeuge - Chucking tools pneumatisch betätigt Air operated Centering Vices KZS-P Kraftbetätigter Air-operated Centering Vice KZS-PG Kraftbetätigter mit großem Backenhub Air-operated Centering
MehrP A max. 100bar A P max. 16bar
1 Schaltfunktion A: function A: direktgesteuert Modulbauweise NC (stromlos geschlossen) Schaltfunktion B: NC (normally closed) function B: NO (stromlos offen) NO (normally open) direct acting modular design
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
direktgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
zwangsgesteuert force pilot operated Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Nennweite DN
MehrRSL Lichttechnik. Tannenweg 1 3 D Sankt Augustin T F
Tannenweg 13 DONLIGHTS Design Pures Lict sceint direkt aus der Deckenöffnung zu stralen. Nur eine Haarfuge zeicnet sic fast unmerklic um den makellosen Hocglanzreflektor ab. Optional kann ein vollkommen
Mehr2/2-Wege Kunststoff-Magnetventil 2/2-way plastic solenoid valve. Baureihe 148 Type 148
direktgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Bauart Nennweite DN 2,0 8,0 Druckbereich Gehäusewerkstoff
MehrPneumatic linear actuator - series MSR with cylinder Pneumatischer Linearantrieb Serie MSR mit Zylinder
Technische Eigenschaften: - Betriebsdruck: 2-8 bar - Wiederholgenauigkeit: 0.05 mm mit einstellbarem Hub - Betriebstemperatur: 5 C bis 60 C - Antrieb: durch integrierten Zylinder - Gehäus: hartbeschichtete
MehrTriASS Schreibtische. TriASS Schreibtischsystem Montageanleitung. TriASS Desking System Assembly Instructions. Das Assmann Prinzip. Gute Arbeit.
Das Assmann Prinzip. Gute Arbeit. TriASS Schreibtischsystem Montageanleitung TriASS Desking System Assembly Instructions The Assmann principle. Designed to work well. TriASS Desks Schreibtisch, Typ ST16
Mehr100% Precise & flexible ALBRECHT
100% Precise & flexible LBRECHT Das Prices /Preise 2014 2015 Ein lbrecht ersetzt alle Spannzangen. Und spart Ihnen Jahr um Jahr viele rbeitstage * n lbrecht CNC chuck replaces all collets, thus, saves
MehrB 1 - B 4 B 5 - B 6 B 7 - B 9 B 10 B 11 - B 13 B 14 B 15 & B 17 - B 18 B 16 B 19 B 20 - B 24 B 25 B 26 - B 27 B 28 - B 29 B 29
Zahnstangen Racks Lagerprogramm stock programme Zahnstangen geschliffen, gerade & schräg Zahnstangen vergütet, gerade & schräg Zahnstangen induktiv gehärtet, gerade & schräg Zahnstangen rostfrei Zahnstangen
Mehrtigspeed oscillation drive 45 hotwire
tigspeed oscillation drive 45 hotwire 090-000180-00502 TIG cold wire and hot wire welding with dynamic wire feed system Dynamic wire feeding for a controllable weld pool even with positional welding: The
MehrRetractable undercarriages
Retractable undercarriages Retractable undercarriage by FEMA for self launching large model gliders with nose drive (FES). Following the general trend that more and more large model gliders are equipped
MehrSYSTEM Guide Rail 2017
ProductInfo SYSTEM Guide Rail 2017 ProductNews 25.11.2009 SYSTEM Indoor SYSTEM 25x25 SYSTEM 19x27 SYSTEM Outdoor SYSTEM 56x58 SYSTEM 40x40 High Tech Blind Components Industriestrasse 12-14 AT 2201 Gerasdorf/Wien
Mehrdirektgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow
1 direktgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow Schaltfunktion A: NC (stromlos geschlossen) function A: NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally
MehrPneumatic linear actuator - series MG with cylinder Pneumatischer Linearantrieb Serie MG mit zylinder
Technische Eigenschatften: - Betriebsdruck: 2 8 bar - Wiederholgenauigkeit: 0.05mm mit einstellbarem Hub - Betriebstemperaturbereich von 5 C bis 60 C - Antrieb: durch integrierten Zylinder - Gehäuse: hartbeschichtete
MehrAufbohrer Kegelsenker Core Drills Countersinks
Aufbohrer Kegesenker Core Dris Countersinks ZEICHENERKLÄRUNG / LEGEND SCHNEIDSTOFF / TOOL MATERIAL VHM VHM / Soid carbide BESCHICHTUNG / COATING TN TiN TF TiAIN 60 INHALT / INDEX Aufbohrer / Core dris
Mehr0,5 max. 16bar (see table) body material brass, AISI 303, AISI 316
servogesteuert pilot operated Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Nennweite DN 13 50
MehrNewest Generation of the BS2 Corrosion/Warning and Measurement System
Newest Generation of the BS2 Corrosion/Warning and Measurement System BS2 System Description: BS2 CorroDec 2G is a cable and energyless system module range for detecting corrosion, humidity and prevailing
Mehrservogesteuert pilot operated
1 servogesteuert pilot operated Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: NO (stromlos offen) function B: NO (normally open) Bauart Sitzventil mit Membrandichtung
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
direktgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally
MehrTechnical Documentation and Operation Manual. Kühlgehäuse der Pyrometerserie Metis Cooling jacket for pyrometer series Metis (KG10-00)
Beschreibung und Bedienungsanleitung Technical Documentation and Operation Manual Kühlgehäuse der Pyrometerserie Metis Cooling jacket for pyrometer series Metis (KG10-00) Inhalt S./P. 1. Beschreibung /
MehrHazards and measures against hazards by implementation of safe pneumatic circuits
Application of EN ISO 13849-1 in electro-pneumatic control systems Hazards and measures against hazards by implementation of safe pneumatic circuits These examples of switching circuits are offered free
MehrRückschlagventile Serie VCP hydraulisch entsperrbar Check valves VCP range hydraulically pilot-operated
Rückschlagventile Serie VCP hydraulisch entsperrbar Check valves VCP range hydraulically pilot-operated Betriebsdruck bis 320 bar Working pressure up to 320 bar Nenndurchfluss bis 200 l/min Nominal flow
MehrKreative Freiräume. Vielfalt entdecken. Creative freedom. Discovering variety
purity news 1 Vielfalt entdecken. Discovering variety Purity Die neue Klasse von Porzellan. Filigranes Noble China im zarten Farbton BoneWhite. The new class of porcelain. Filigree Noble China in a delicate
MehrKomponenten-Systeme Components systems Kombirollen Combined Bearings. Anschraubplatten rechteckig für Kombirollen und Radiallager
Kombirollen Combined s Anscraubplatten recteckig für Kombirollen und Radiallager Flange plates rectangular for Combined s and Radial s WINKEL Kombirollen mit Anscraubplatten sind fertige Systemelemente
MehrFOXY ADVANCED PASSION OF MOVEMENT
FOXY ADVANCED PASSION OF MOVEMENT www.panther.tv The New Big Base The Big Base was designed to ensure greater stability and security. By simply turning the base 90 you can choose between 62cm and 100cm
MehrZehnder ComfoWell 320
Benefits All air treatment functions available: attenuator, fine filter, active carbon filter, manifold box Modular design Compact dimensions Easy to clean Components connected with locking slides for
MehrBISON ORIGINALS EMPOWERED BY PRECISION KRAFTSPANNFUTTER POWER CHUCK
Патроны токарные с механическим креплением это продукты, полностью совместимые с патронами «Kitagawa». Применяемые конструктивные решения втулки обеспечивают его жесткость, что непосредственно увеличивает
MehrKeilspannelement Wedge clamping element
Spannen vieler Werkstücke auf kleinstem Raum Das Mehrfach-Spannsystem für noch mehr Werkstück- Spannung auf dem Maschinentisch. Compact clamping of multiple workpieces This multiple clamping system makes
MehrA P max. 16bar P R max. 64bar R P max. 16bar
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 50 Druckbereich
MehrVERO-S SPM. Nullpunktspannsysteme Quick-change Pallet Systems
Spannmembran für die Werkstückdirektspannung Mit der Spannmembran lassen sich besonders filigrane oder dünne Werkstücke unterschiedlicher Spanngeometrien spannen. Die exakte Werkstückgeometrie wird dazu
MehrKSC2. Zentrischspanner Centric Clamping Vises
KSC2 KSC2 Zentrischspanner mit Backenschnellwechselsystem Der Zentrischspanner KONTEC KSC2 ist der Allrounder für Rohteil- und Fertigteilbearbeitungen, Mehrfachspannungen sowie Automation auf Palettenspeichern.
Mehrdiameter DN 2,0 6,0 0 max. 48bar (see table) body material brass, AISI 303, AISI 316
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Sitzventil Nennweite
Mehrprismenlaufschienen prismatic guide rails
69 Katalog 01 Standardführungen Catalog 01 standard ball-bearing 08 prismenlaufschienen prismatic guide rails > unser fertigungsprogramm // parallelitätsdiagramm // Bohrbeispiele // Abstreifer für prismenlaufschienen
MehrSW-MOTECH GmbH & Co. KG Ernteweg 8/ Rauschenberg Germany. Tel. +49 (0) 64 25/ Fax +49 (0) 64 25/
ATTENTION: The assembly of this product can be complicated and requires a good technical understanding. If you are not sure of how to do this, have a s pecialty garage perform the mounting and service.
MehrRetractable undercarriages
Retractable undercarriages Retractable undercarriage by FEMA for self launching large model gliders with nose drive (FES). Following the general trend that more and more large model gliders are equipped
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
direktgesteuert direct acting Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Nennweite DN 1,7 Druckbereich Gehäusewerkstoff Dichtwerkstoff Sitzventil mit Handnotbetätigung
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 06/2012
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 Druckbereich
MehrHCG - Horn Catalogue Guide
HCG - Horn Catalogue Guide INNENEAREITUNG / INTERNAL GROOVING ohrungs-ø ARTIKELGRUPPEN/ PRODUCT LINE ore Ø 217 S223 S224 231 S229/229 S312/312 315 bis / up to 8 mm 8 mm bis / up to 18 mm 18 mm bis / up
MehrLufft UMB Sensor Overview
Lufft Sensor Overview Wind Radiance (solar radiation) Titan Ventus WS310 Platinum WS301/303 Gold V200A WS300 WS400 WS304 Professional WS200 WS401 WS302 Radiance (solar radiation) Radiation 2 Channel EPANDER
MehrNetwork premium POP UP Display
Premium Pop Up System seamless graphic precision very compact and versatile pop-up system quick to set up at any location comes in a number of different shapes; straight, curved, wave-shaped, stair formations,
MehrAnbauflansch mit Einbauspannsatz HSK-C mit zentraler Kühlmittelzuführung, komplett mit Einbauspannsatz für Hohlschaft DIN HSK-C und A
Anbauflansch mit Einbauspannsatz HSK-C mit zentraler Kühlmittelzuführung, komplett mit Einbauspannsatz für Hohlschaft DIN 69893 HSK-C und A Adaptors with Built-in Clamping System HSK-C with central coolant
Mehrmax. Flügelgewicht: 140 kg max. Flügelgewicht: 200 kg max. Flügelbreite: mm max. Flügelbreite: mm
JUMBO Allgemeine und technische Hinweise: JUMBO - Universalbeschläge haben ihren besonderen Einsatzbereich bei stärkeren Glasdicken und großen Flügelabmessungen gefunden. Dieser Beschlag ist geeignet für
MehrASP-1750 HUB-POSITIONIEREINHEIT BETRIEBSDRUCK 4-8 BAR
ASP-1750 HUB-POSITIONIEREINHEIT BETRIEBSDRUCK 4-8 BAR LIFTING AND POSITIONING UNIT OPERATING PRESSURE 4-8 BAR TECHNISCHE DATEN ANWENDUNG Die Positioniereinheit ASP-1750 dient zum Indexieren und Positionieren
MehrMechanisch betätigte Ventile Typ 74 NW 2 3/2-Wege Sitzventile Direktgesteuert
NW /-Wege Sitzventile mm Orifice /-Way Poppet Valves Dieses Sitzventil wurde speziell für den Einsatz in Schalttafeln und Betätigungseinrichtungen entwickelt. verschiedene Betätigungsmöglichkeiten (Stößel,
MehrSNOW CHAMPIONS TEAM WINTER. A clean product line. TO COMBAT WINTER SNOW
TEAM WINTER SNOW CHAMPIONS TO COMBAT WINTER SNOW bema snow plough serie 1100 bema snow plough serie 700 bema snow plough serie 550 bema V-plough V800 SNOW CHAMPIONS Features at a glance Special features
MehrGODA. Gleitring-O-Ring-Dichtsatz, außendichtend Slide and O-Ring Seal, Outside Sealing. Gleitring-O-Ring-Dichtsatz, außendichtend
Gleitring-O-Ring-Dichtsatz, außendichtend Slide and O-Ring Seal, outside sealing Der Hunger Gleitring-O-Ring-Dichtsatz ist ein schmalauendes Element zur Adichtung von Zylinderkolen. Er ist für einfache
MehrPOR. Präzisions-O-Ring Precision O-Ring
POR Die Hunger e und Rundschnurringe werden für statische Abdichtungen eingesetzt. Durch eine große Auswahl geeigneter Dichtungswerkstoffe werden Dichtungsprobleme bei verschiedenen Druckmedien, Drücken
MehrPyramiden pyramids. Pyramiden pyramids. Mehrfachspannung auf 5-Achs Maschinen. Multiple clamping on 5-axis machines
Pyramiden pyramids Pyramiden pyramids Mehrfachspannung auf 5-Achs Maschinen Mehrfachspannungen für weniger Werkzeugwechsel und längere Spindellaufzeiten auf 5-Achs Maschinen. Beste Zugänglichkeit für kurze
MehrSpanntechnik Tightening TYPE-CM. Mechanischer Zentrumspanner / Mechanical centering vise
Spanntechnik Tightening TYPE-CM Mechanischer Zentrumspanner / Mechanical centering vise TYPE-CM Mechanischer Zentrumspanner Selbstzentrierender Spannschraubstock, ideal für speziell geformte-und Formteile.
Mehr2/2-Wege Kunststoff-Magnetventil 2/2-way plastic solenoid valve. Baureihe 111 Type 111. direktgesteuert mit Trennmembrane flüssigkeitsgedämpft
direktgesteuert mit Trennmembrane flüssigkeitsgedämpft direct acting with isolating diaphragm fluid-damped Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Bauart Nennweite
MehrFR777 Differenzial-Kulissenauszug Bodenmontage, 200 kg Tragkraft, mit Gegenführung
http://www.fulterer.com http://www.fultererusa.com Instructions F777 Differenzial-Kulissenauszug Bodenmontage, 00 kg Tragkraft, mit Gegenführung F777 Progressive-Action Pantry Pull-out, Bottom Mount 450
MehrAngebotsaufforderung. Ausschreibungstexte Lehnen Funktion T
Angebotsaufforderung Funktion T300 03.08.2012 Auftraggeber: Lehnen GmbH Seite: 2 von 8 *** Hinweistext Bathroom series T-300 07. Products with load-bearing capacity till max. 300 kg 07..001. 1,000 Stk......
MehrMikro-Magnetventile Typ 65 NW 0,5/1/1,6/2 2/2- und 3/2-Wege Sitzventile Direktgesteuert
NW 0,//,6/ /- und /-Wege Sitzventile 0.//.6/ mm Orifice /- and /-Way Poppet Valves Als Standard sind die Ventile in vielfältigen Ausführungen lieferbar, z.b. drei unterschiedliche Sockelformen (Standard-,
MehrGODI. Gleitring-O-Ring-Dichtsatz, innendichtend Slide and O-Ring Seal, Inside Sealing. Slide and O-Ring Seal, inside sealing
Gleitring-O-Ring-Dichtsatz, innendichtend Slide and O-Ring Seal, inside sealing Der Hunger Gleitring-O-Ring-Dichtsatz ist ein schmalbauendes Element zur Abdichtung von Stangen. Er ist für einfache und
MehrMakro Grip. Profile Clamping. Quick Point. Grip Fix. Clamping system for all profile parts. Highly precise zero-point clamping system
Profile Clamping Clamping system for all profile parts Makro Grip Center vise for 5-axis machining Quick Point Highly precise zero-point clamping system 2010 Grip Fix Provides maximum clamping force 2011
MehrOverview thermostat/ temperature controller
Thermostat TR-238 The Thermostat TR-238 is a electronic two-level controller for controlling of and in climate control units and vehicles. Voltage range (12V): Voltage range (24V): Control range: Hystereses:
Mehr2/2-way plastic solenoid valve - Type 104
- direktgesteuert mit Trennmembrane direct acting with isolating diaphragm Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Bauart Nennweite DN 1,0 2,5 Druckbereich Gehäusewerkstoff
MehrTDT. Tandem-Dichtring für Teleskopzylinder Tandem Seal for Telescopic Cylinders. Tandem Seal for Telescopic Cylinders
Tandem-Dichtring für Teleskopzylinder Tandem-Dichtring für Teleskopzylinder Der Hunger Tandem-Dichtring für Teleskopzylinder dient zur Abdichtung von Teleskopstufen und kann bei Hydrauliköl auf Mineralölbasis
MehrD-Sub Connectors with Plastic Brackets and Accessories D-Sub Steckverbinder mit Kunststoffwinkel und Anbauteilen
D-Sub Connectors with Plastic Brackets and Accessories D-Sub Steckverbinder mit Kunststoffwinkel und Anbauteilen Plastic brackets are used to ensure that a conductive electrical connection does not occur
MehrSchnell-Start-Anleitung Quick Start Guide
Schnell-Start-Anleitung Quick Start Guide 3 1. Cube anschließen Schließen Sie den Cube an die Stromversorgung an. Verbinden Sie den Cube mit dem Router. Die Power- und die Internet-LED beginnen zu blinken,
MehrWechseleinsätze Inserts Inserts. easy-quick
Wechseeinsätze Inserts Inserts easy-quick easy-quick Schwarzwadstr. 13 Te +49 78 43 / 94 66 0 Wechseeinsätze für easy-quick System Größe HT 2 size HT 2 numéro HT 2 Spannzangenaufnahme coet chuck porte
MehrBAGS GROUP I PRICE IN EUR/PCS TECHNICAL SPECIFICATION 1,47 1,05 1,86 1,31 1,51 1,09 0,90 0,88 1,06 0,79 0,81 0, , ,76 0,77 0,74
BAG/BOX Made-to-measure paper bags! The production of our bags is based on innovative solutions and high-quality materials. We pay a lot of attention to details. The majority of elements in our bags is
Mehrvario The new versatile roller blind concept
vario The new versatile roller blind concept VARIO CASSETTE Vario a flexible roller blind system with a cassette for wall, ceiling and niche mounting. The system offers several different mechanism options
MehrBaureihe 269 Type /2-Wege Coaxialventil 2/2-way coaxial valve. direktgesteuert direct acting. diameter DN Nennweite DN 10 32
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 32 Druckbereich
MehrKURZANLEITUNG. Firmware-Upgrade: Wie geht das eigentlich?
KURZANLEITUNG Firmware-Upgrade: Wie geht das eigentlich? Die Firmware ist eine Software, die auf der IP-Kamera installiert ist und alle Funktionen des Gerätes steuert. Nach dem Firmware-Update stehen Ihnen
MehrAbisoliermaschinen Stripping machines
AI 01 Das Basismodell AI 01 ist eine elektromotorisch angetriebene Abisoliermaschine. Eine exakte Abisolierung von Leitern verschiedener Isolationen ist bis zu einem Außendurchmesser von 5 mm möglich.
Mehr2/2-Wege Coaxialventil 2/2-way coaxial valve. Baureihe 269 Type 269. direktgesteuert direct acting
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 32 Druckbereich
Mehr