Publications of Martin F.-X. Wagner
|
|
- Kai Kirchner
- vor 6 Jahren
- Abrufe
Transkript
1 Publications A. MONOGRAPHIES UND CONTRIBUTIONS TO BOOKS (6) M.F.-X. Wagner: Preface (in German) for a collection of essays on Research topics of the future (Wissenschaftsthemen der Zukunft). With C. Zwierlein and K. Schmidt, published by the NRW Academy of Science and Arts. Ferdinand Schöningh, Paderborn, ISBN (5) M.F.-X. Wagner: Mechanische Eigenschaften der Formgedächtnislegierung Nickel-Titan: Experimentelle und theoretische Untersuchungen auf mehreren Längenskalen. In German. Habilitation Thesis, Ruhr-University Bochum, April (4) M.F.-X. Wagner: Versprechen von Forschung und Technik Selbstdarstellung und gesellschaftliche Wahrnehmung. In German. Essay in the booklet Designer-Baby. Diagnostik und Forschung am ungeborenen Leben, pp Verlag Ferdinand Schöningh, Paderborn, ISBN (3) M.F.-X. Wagner: Ein Beitrag zur strukturellen und funktionalen Ermüdung von Drähten und Federn aus NiTi-Formgedächtnislegierungen. In German. PhD Thesis, Ruhr-University Bochum, Bochum University Press, ISBN (2) M. Wagner und K. Neuking: Werkstoffinformatik - Messen, Verarbeiten, Modellieren. In German. Lecture Notes on Computing in Materials Science, Ruhr-University Bochum, (1) M. Wagner: The effect of weld toe treatments on protective coatings. Diploma Thesis, Chalmers University of Technology, Gothenburg, Sweden/ Ruhr- University Bochum, Chalmers University Press, X-02/131. B. PEER-REVIEWED JOURNALS (647 citations in November 2012; h = 14) (50) J. Pfetzing-Micklich, C. Somsen, A. Dlouhy, C. Begau, A. Hartmaier, M.F.-X. Wagner, G. Eggeler: On the crystallographic anisotropy of nanoindentation in pseudoelastic NiTi. Acta Materialia 61, 2013, (49) P. Frint, M. Hockauf, T. Halle, M.F.-X. Wagner, T. Lampke: The role of Backpressure during large scale Equal-Channel Angular Pressing. Materialwissenschaft und Werkstofftechnik 43, 2012, (48) K. Hockauf, M. Hockauf, M.F.-X. Wagner, T. Lampke, T. Halle: Fatigue crack propagation in an ECAP-processed aluminium alloy influence of shear plane orientation. Materialwissenschaft und Werkstofftechnik 43, 2012,
2 (47) S. Fritsch, M. Scholze, M.F.-X. Wagner: Cryogenic forming of AA7075 by Equal- Channel Angular Pressing. Materialwissenschaft und Werkstofftechnik 43, 2012, (46) I. Sen, H. Jirková, B. Masek, M. Böhme, M.F.-X. Wagner: Microstructure and mechanical behavior of a mini-thixoformed tool steel. Metallurgical and Materials Transactions A 43, 2012, (45) S. Seipp, M.F.-X. Wagner, K. Hockauf, I. Schneider, L.W. Meyer, M. Hockauf: Microstructure, crystallographic texture and mechanical properties of the magnesium alloy AZ31B after different routes of thermo-mechanical processing. International Journal of Plasticity 35, 2012, (44) S. Wagner, S. Siebeck, M. Hockauf, D. Nestler, H. Podlesak, B. Wielage, M.F.-X. Wagner: Effect of SiC-reinforcement and equal-channel angular pressing on microstructure and mechanical properties of AA2017. Advanced Engineering Materials 14, 2012, (43) B. Zillmann, T. Clausmeyer, S. Bargmann, T. Lampke, M.F.-X. Wagner, T. Halle: Validation of Simple Shear Tests for Parameter Identification Considering the Evolution of Plastic Anisotropy. Technische Mechanik 32, 2012, (42) M. Hockauf, M.F.-X. Wagner, M. Händel, T. Lampke, D.J. Nestler, B. Wielage: High-strength aluminium-based light-weight materials for safety components recent progress by nano structuring and particle reinforcements. International Journal of Materials Research 103, 2012, (41) P. Frint, M. Hockauf, D. Dietrich, T. Halle, M.F.-X. Wagner, T. Lampke: Influence of strain gradients on the grain refinement during industrial scale ECAP. Materialwissenschaft und Werkstofftechnik 42, 2011, (40) S. Fritsch, S. Hunger, M. Scholze, M. Hockauf, M.F.-X. Wagner: Optimization of thermo mechanical treatments using cryogenic rolling and aging of the high strength aluminium alloy AlZn5.5MgCu (AA7075). Materialwissenschaft und Werkstofftechnik 42, 2011, (39) N. Zhou, C. Shen, M.F.-X. Wagner, G. Eggeler, M.J. Mills, Y. Wang: Effect of Ni 4 Ti 3 precipitation on martensitic transformation in Ti-Ni. Acta Materialia 58, 2010, (38) K. Hockauf, T. Halle, M. Hockauf, L.W. Meyer, M.F.-X. Wagner, T. Lampke: Thermomechanische Optimierung mittels ECAP und Wärmebehandlung an einer Aluminiumlegierung der Automobil- und Luftfahrtindustrie. In German. Materialwissenschaft und Werkstofftechnik 41, 2010, (37) A.V. Shutov, C. Kuprin, J. Ihlemann, M.F.-X. Wagner, C. Silbermann: Experimentelle Untersuchung und numerische Simulation des inkrementellen Umformverhaltens von Stahl 42CrMo4. In German. Materialwissenschaft und Werkstofftechnik 41, 2010,
3 (36) Ph. Frint, T. Halle, M.F.-X. Wagner, M. Hockauf, T. Lampke: Erfassung von Effekten beim Skalieren von ECAP am Beispiel einer 6000er Aluminiumlegierung. In German. Materialwissenschaft und Werkstofftechnik 41, 2010, (35) S. Wagner, H. Podlesak, S. Siebeck, D. Nestler, M.F.-X. Wagner, B. Wielage, M. Hockauf: Einfluss von ECAP und Wärmebehandlung auf Mikrostruktur und mechanische Eigenschaften einer SiC-verstärkten AlCu-Legierung. In German. Materialwissenschaft und Werkstofftechnik 41, 2010, (34) S. Fritsch, M. Hockauf, R. Schönherr, S. Hunger, L.W. Meyer, M.F.-X. Wagner: Untersuchungen zum Einfluss von ECAP und Tieftemperaturwalzen auf die mechanischen Eigenschaften der Aluminiumlegierung In German. Materialwissenschaft und Werkstofftechnik 41, 2010, (33) M.F.-X. Wagner, A. Schaefer: Macroscopic versus local strain rates during tensile testing of pseudoelastic NiTi. Scripta Materialia 63, 2010, (32) A. Schäfer, M.F.-X. Wagner, J.L. Pelegrina, J. Olbricht, G. Eggeler: Localization events and microstructural evolution in ultra fine grained NiTi shape memory alloys during thermo-mechanical loading. Advanced Engineering Materials 12, 2010, (31) D. Peter, G. Eggeler, M.F.-X. Wagner: Microstructural characterization of lamellar features in TiAl by FIB imaging. Advanced Engineering Materials 12, 2010, (30) M.F.-X. Wagner, S. Dey, H. Gugel, J. Frenzel, Ch. Somsen, G. Eggeler: Effect of low-temperature precipitation on the transformation characteristics of Ni-rich NiTi shape memory alloys during thermal cycling. Intermetallics 18, 2010, (29) J. Frenzel, E. George, A. Dlouhy, Ch. Somsen, M.F.-X. Wagner, G. Eggeler: Influence of Ni on Martensitic Phase Transformations in NiTi Shape Memory Alloys. Acta Materialia 58, 2010, (28) M.L. Young, M.F.-X. Wagner, J. Frenzel, W.W. Schmahl, G. Eggeler: Phase volume fractions and strain measurements in an ultrafine-grained NiTi shapememory alloy during tensile loading. Acta Materialia 58, 2010, (27) J. Pfetzing-Micklich, M.F.-X. Wagner, R. Zarnetta, J. Frenzel, G. Eggeler, A.E. Markaki, J. Wheeler, T.W. Clyne: Nanoindentation of a Pseudoelastic NiTiFe Shape Memory Alloy. Advanced Engineering Materials 12, 2010, Published again in the AEM Special Issue Best of MSE 2012, S63-S69. (26) C. Grossmann, A. Schaefer, M.F.-X. Wagner: A finite element study on localized deformation and functional fatigue in pseudoelastic NiTi strips. Materials Science and Engineering A527, 2010,
4 (25) J. Pfetzing, A. Schäfer, Ch. Somsen, M.F.-X. Wagner: Nanoindentation of pseudoelastic NiTi shape memory alloys: Thermo-mechanical and microstructural aspects. International Journal of Materials Research 100, 2009, (24) R. Heinen, K. Hackl, W. Windl, M.F.-X. Wagner: Microstructural evolution during multi-axial deformation of pseudoelastic NiTi studied by first-principles-based micromechanical modelling. Acta Materialia 57, 2009, (23) D.M. Norfleet, P.M. Sarosi, S. Manchiraju, M.F.-X. Wagner, M.D. Uchic, P.M. Anderson, M.J. Mills: Study of Transformation-Induced Plasticity During Pseudo- Elastic Deformation of Ni-Ti Microcrystals. Acta Materialia 57, 2009, (22) D. Peter, J. Pfetzing, M.F.-X. Wagner, G. Eggeler: Microstructural anisotropy, uniaxial and biaxial creep behavior of Ti-45Al-5Nb-0.2B-0.2C. Materials Science and Engineering A , 2009, (21) D. Peter, G.B. Viswanathan, M.F.-X. Wagner, G. Eggeler: Grain Boundary Sliding in a TiAl Alloy with Fine-Grained Duplex Microstructure during 750 C Creep. Materials Science and Engineering A , 2009, (20) J. Pfetzing, M.F.-X. Wagner, G. Eggeler: Untersuchungen zum Einfluss der Kornorientierung auf Nanoindentations-Messungen an Reineisen On the Influence of Grain Orientation on Nanoindentation Testing of Pure Iron. Praktische Metallographie 46, 2009, (19) M.F.-X. Wagner, W. Windl: Elastic anisotropy of Ni 4 Ti 3 from first principles. Scripta Materialia 60, 2009, (18) M.F.-X. Wagner, W. Windl: Lattice stability, elastic constants and macroscopic moduli of NiTi martensites from first principles. Acta Materialia 56, 2008, (17) D. Peter, M.F.-X. Wagner, G. Eggeler: Mikrostruktur und Kriechen einer stranggepressten TiAl-Legierung. Praktische Metallograpie (Sonderband) 40, 2008, (16) J. Olbricht, M.F.-X. Wagner, A. Condó, A. Dlouhy, Ch. Großmann, A. Kröger, Ch. Somsen, G. Eggeler: A transimission electron microscopy procedure for insitu straining of miniature pseudoelastic NiTi specimens. International Journal of Materials Research 99, 2008, (15) M.F.-X. Wagner, N. Nayan, U. Ramamurty: Healing of fatigue damage in NiTi shape memory alloys. Journal of Physics D 41, 2008, (14) J. Mentz, J. Frenzel, M.F.-X. Wagner, K. Neuking, G. Eggeler, H.P. Buchkremer, D. Stöver: Powder metallurgical processing of NiTi shape memory alloys with elevated transformation temperatures. Materials Science and Engineering A491, 2008,
5 (13) D. Peter, J. Pfetzing, M.F.-X. Wagner, Ch. Somsen, J. Pesicka, B. Skrotzki, G. Eggeler: Quantitative Charakterisierung der Gefüge-Anisotropie einer stranggepressten TiAl-Legierung Quantitative Characterisation and Microstructural Anisotropy of a Hot-Extruded TiAl Alloy. Praktische Metallographie 45, 2008, (12) M. Hasan, W.W. Schmahl, K. Hackl, R. Heinen, J. Frenzel, S. Gollerthan, G. Eggeler, M. Wagner, J. Khalil-Allafi, A. Baruj: Hard X-ray studies of stressinduced phase transformations of superelastic NiTi shape memory alloys under uniaxial load. Materials Science and Engineering A , 2008, (11) M.F.-X. Wagner, G. Eggeler: New aspects of bending rotation fatigue in ultrafine-grained pseudo-elastic NiTi wires. International Journal of Materials Research 97, 2006, (10) M.F.-X. Wagner, G. Eggeler: Stress and strain states in a pseudoelastic wire subjected to bending rotation. Mechanics of Materials 38, 2006, (9) M. Humburg, G. Eggeler, M. Wagner: Thermo-Kombiventil Thermomanagement im Standheizbetrieb. In German. Automobiltechnische Zeitschrift 108, 2006, (8) L. Krone, J. Mentz, M. Bram, H.P. Buchkremer, D. Stöver, M. Wagner, G. Eggeler, D. Christ, S. Reese, D. Bogdanski, M. Köller, S. Esenwein, G. Muhr, O. Prymak, M. Epple: The potential of powder metallurgy for the fabrication of biomaterials on the basis of nickel-titanium: A case study with a staple showing shape-memory behaviour. Advanced Engineering Materials 7, 2005, (7) J. Khalil-Allafi, W.W. Schmahl, M. Wagner, H. Sitepu, D.M. Toebbens, G. Eggeler: The influence of temperature on lattice parameters of coexisting phases in NiTi shape memory alloys a neutron diffraction study. Materials Science and Engineering A378, 2004, (6) W.W. Schmahl, J. Khalil-Allafi, B. Hasse, M. Wagner, A. Heckmann, Ch. Somsen: Investigation of the phase evolution in a super-elastic NiTi shape memory alloy (50.7 at.%ni) under extensional load with synchrotron radiation. Materials Science and Engineering A378, 2004, (5) G. Eggeler, E. Hornbogen, A. Yawny, A. Heckmann, M. Wagner: Structural and Functional Fatigue of NiTi Shape Memory Alloys. Materials Science and Engineering A378, 2004, (4) M. Wagner, T. Sawaguchi, G. Kausträter, D. Höffken, G. Eggeler: Structural Fatigue of Pseudoelastic NiTi Shape Memory Wires. Materials Science and Engineering A378, 2004, (3) J. Khalil-Allafi, B. Hasse, M. Klönne, M. Wagner, Th. Pirling, W. Predki, W.W. Schmahl: In-situ diffraction investigation of superelastic NiTi shape memory alloys under mechanical stress with neutrons and with synchrotron radiation. Materialwissenschaft und Werkstofftechnik 35, 2004,
6 (2) M. Wagner, J. Richter, J. Frenzel, D. Grönemeyer, G. Eggeler: Design of a Medical Non-Linear Drilling Device: The Influence of Twist and Wear on the Fatigue Behaviour of NiTi Wires Subjected to Bending Rotation. Materialwissenschaft und Werkstofftechnik 35, 2004, (1) T. Sawaguchi, G. Kausträter, A. Yawny, M. Wagner, G. Eggeler: Crack Initiation and Propagation in 50.9 At. pct Ni-Ti Pseudoelastic Shape-Memory Wires in Bending-Rotation Fatigue. Metallurgical and Materials Transactions A34, 2003, C. CONFERENCE PROCEEDINGS (most of them peer-reviewed) (21) H. Jirkova, D. Aisman, I. Sen, M.F.-X. Wagner, M. Behulova, M. Kusy, B. Masek: Mini-thixoforming of a Steel Produced by Powder Metallurgy. Proc. of the International conference on semi-solid processing of alloys and composites, S2P, 2012, Cape Town, South Africa. Solid State Phenomena , 2013, (20) S. Winter, S. Fritsch, M.F.-X. Wagner: Microstructural evolution and mechanical properties of β-titanium Ti-10V-2Fe-3Al during incremental forming. Proc. TMS Volume 1: Materials Processing and Interfaces, Orlando, Florida, USA, (19) B. Zillmann, M. Härtel, T. Halle, T. Lampke, M.F.-X. Wagner: Flow Behavior of Automotive Aluminum Sheets During In-Plane Uniaxial and Biaxial Compression Loading. Prof. ICTP 2011, Aachen. Steel Research International (Special Edition edited by G. Hirt, A.E. Tekkaya), (18) P. Frint, M. Hockauf, T. Halle, G. Strehl, T. Lampke, M.F.-X. Wagner: Microstructural Features and Mechanical Properties after Industrial Scale ECAP of an Al-6060 alloy. Proc. NanoSPD 2011, China. Materials Science Forum , (17) K. Hockauf, T. Halle, M. Hockauf, M.F.-X. Wagner, T. Lampke: Near-threshold fatigue crack propagation in an ECAP-processed ultrafine-grained aluminium alloy. Proc. NanoSPD 2011, China. Materials Science Forum , (16) M. Klärner, V. Bayreuther, C. Kuprin, A. Czech, M. Kausch, L. Kroll, B. Wielage, D. Nestler, M. Wagner: Ressourcenschonende Verbundstrukturen und Technologien durch Ultraleichtbau. In German. Proc. 'Energieeffiziente Produktund Prozessinnovationen in der Produktionstechnik - 1. Internationales Kolloquium des Spitzentechnologieclusters eniprod' (15) M.F.-X. Wagner: Microstructural and mechanical challenges in biomedical NiTi. Proc. of ICSMA 2009, Journal of Physics: Conference Series 240, , open access:
7 (14) A. Schaefer, M.F.-X. Wagner: Strain mapping at propagating interfaces in pseudoelastic NiTi. Proc. of ESOMAT 2009, EDP Sciences, open access: (13) J. Pfetzing, M.F.-X. Wagner, T. Simon, A. Schaefer, Ch. Somsen, G. Eggeler: TEM investigation of the microstructural evolution during nanoindentation of NiTi. Proc. of ESOMAT 2009, EDP Sciences, open access: (12) A. Schäfer, J. Olbricht, M.F.-X. Wagner: Monitoring localized deformation of pseudoelastic NiTi subjected to uniaxial loading. Proc. of ICOMAT 2008, (11) C. Großmann, A. Schäfer, M.F.-X. Wagner: Finite element simulation of localized phase transformations in pseudoelastic NiTi shape memory alloys subjected to multi-axial stress states. Proc. of ICOMAT 2008, (10) J. Pfetzing, M.F.-X. Wagner, J. Frenzel, Ch. Somsen, G. Eggeler: Thermomechanical constraints on pseudoelasticity during nanoindentation of binary and ternary NiTi(Fe) alloys. Proc. of ICOMAT 2008, (9) J. Olbricht, A. Schäfer, M.F.-X. Wagner, G. Eggeler: Characterization of transformation localization during pseudoelastic cycling of NiTi. Proc. of SMST 2007, (8) M. Frotscher, J. Burow, M.F.-X. Wagner, K. Neuking, G. Eggeler, P. Schön, R. Böckmann: Thermo-mechanical processing, microstructure and bending rotation fatigue of ultra-fine grained NiTiCr-wires. Proc. of SMST 2007, (7) M. Wagner, G. Eggeler: Multiple stress plateaus during complex mechanical cycling of pseudo elastic NiTi wires. Proc. of SMST 2006, (6) M. Wagner, J. Frenzel, G. Eggeler: Localization of Deformation During Pseudo Elastic Cycling of Ultra Fine Grained NiTi Shape Memory Wires. Proc. of FATIGUE 2006, FT196 (auf CD) (5) J. Richter, M. Wagner, D. Grönemeyer, G. Eggeler: Development and fatigue experiments of a novel non-linear medical drilling device containing a flexible NiTi shaft. Proc. of SMST 2004, (4) M. Wagner, G. Eggeler: Evolution of microstructural parameters during cycling of NiTi and their effect on mechanical and thermal memory. Proc. of SMST 2004, (3) M. Wagner, J.-K. Yu, G. Kausträter, G. Eggeler: Functional Fatigue of NiTi Shape Memory Coil Spring Actuators. Proc. of ACTUATOR 2004, (2) J. Richter, A. Bracke, M. Wagner, G. Eggeler, D. Grönemeyer: Metallographische Untersuchungen von NiTi-Wellen eines nicht-linearen Bohrsystems für den mikrotherapeutischen Einsatz. In German. Sonderband Praktische Metallographie 35, 2003,
8 (1) G. Kausträter, A. Yawny, M. Wagner, B. Skrotzki, G. Eggeler: Back Flow Creep Phenomena in Short Fibre Reinforced Aluminium Alloys. Materials Science Forum , 2002,
Publikationen von Martin F.-X. Wagner
Publikationen A. MONOGRAPHIEN UND BUCHBEITRÄGE (7) M.F.-X. Wagner, J. Pfetzing, G. Eggeler: Basic Mechanical Properties. Buchkapitel im SFB-Abschluss-Buch Shape Memory Alloys (Arbeitstitel). Wiley Verlag,
Untersuchung der Prozessparameter für den Drahtzugprozesses mit Nickel-Titan
Untersuchung der Prozessparameter für den Drahtzugprozesses mit Nickel-Titan, Deutschland Dipl.-Ing. Dennis Otibar INHALT 1. Übersicht zur Drahtherstellung 2. Einfluss von Nickel in NiTi-Legierungen 3.
Anisotropie, Textur, Umformtechnik
Dierk, Franz Roters, Zisu Zhao, Kurt Helming, Max-Planck-Str.1 40237 Düsseldorf, Germany, raabe@mpie.de http://www.mpg.de http://www.mpie.de http://edoc.mpg.de http://edoc.mpg.de Anisotropie, Textur, Umformtechnik
Nitrogen Solubility in Iron-Base Alloys and
Diss. ETH No. 9488 Nitrogen Solubility in Iron-Base Alloys and Powder Metallurgy of High Nitrogen Stainless Steels A dissertation submitted to SWISS FEDERAL INSTITUTE OF TECHNOLOGY ZURICH, SWITZERLAND
In situ SEM as a tool for investigating micro and nanoscale processes in materials research
In situ SEM as a tool for investigating micro and nanoscale processes in materials research Reiner Mönig Institut for Materials Research II Electrical Mechanical Heating Electrochemical Experiments Projektbüro
Prüfung von Rotorblättern für Windkraftanlagen
Prüfung von Rotorblättern für Windkraftanlagen Florian Sayer www.iwes.fraunhofer.de Kompetenzzentrum Rotorblatt Neue Testverfahren Neue Simulationsverfahren Neue Rotorblätter Material- und Technologieentwicklung
Masterstudium ADVANCED MATERIALS SCIENCE laut Mitteilungsblatt vom (Stück 25.b)
ab 01.10.2016 (Neu) Plan nach ECTS Prüfungsreferat der Naturwissenschaftlichen Fakultät Karl-Franzens Universität Graz Masterstudium ADVANCED MATERIALS SCIENCE laut Mitteilungsblatt vom 23.03.2016 (Stück
Masterstudium TECHNICAL PHYSICS laut Mitteilungsblatt vom (Stück 25.d)
SPO - ab 01.10.2017 (Neu) Plan nach ECTS Prüfungsreferat der Naturwissenschaftlichen Fakultät Karl-Franzens-Universität Graz Masterstudium TECHNICAL PHYSICS laut Mitteilungsblatt vom 29.03.2017 (Stück
1.9 Dynamic loading: τ ty : torsion yield stress (torsion) τ sy : shear yield stress (shear) In the last lectures only static loadings are considered
1.9 Dynaic loading: In the last lectures only static loadings are considered A static loading is: or the load does not change the load change per tie N Unit is 10 /sec 2 Load case Ι: static load (case
Sintering of PM Tool Steels supported by Computational Thermodynamics
Sintering of PM Tool Steels supported by Computational Thermodynamics S. Weber a,b, W. Theisen a a Ruhr-Universitaet Bochum, Werkstofftechnik D-44780 Bochum, Germany b Helmholtz-Zentrum Berlin fuer Materialien
Dünnschichten im Nanometerbereich: neue Eigenschaften für Legierungen?
Dünnschichten im Nanometerbereich: neue Eigenschaften für Legierungen? Ralph Spolenak Laboratory for Nanometallurgy, Department of Materials, ETH Zurich, Switzerland How Outline would aluminum behave?
Laserinduzierte Phasenumwandlung in Ge-Sb-Te Verbindungen für die hochdichte optische Datenspeicherung
Laserinduzierte Phasenumwandlung in Ge-Sb-Te Verbindungen für die hochdichte optische Datenspeicherung Von der Fakultät für Elektrotechnik und Informationstechnik der Rheinisch-Westfälischen Technischen
ECOSHAPE. Economic Advanced Shaping Processes for Integral Structures. Tobias Hornfeck Achim Schoberth
ECOSHAPE Economic Advanced Shaping Processes for Integral Structures Tobias Hornfeck Achim Schoberth Structure 1. State of the art 2. ECOSHAPE consortium 3. Project aims 4. Laser beam forming of aluminium
Innovationen mit den optimalen Werkstoffen Berechnen von Werkstoffdaten für die Praxis
Wir bringen unsere Kunden _einen Schritt weiter durch Technologie, Innovation und Nachhaltigkeit. Innovationen mit den optimalen Werkstoffen Berechnen von Werkstoffdaten für die Praxis Uwe Diekmann Hannover,
Liste der Veröffentlichungen Buchveröffentlichungen
Liste der Veröffentlichungen Buchveröffentlichungen J. Rösler, H. Harders, Mechanisches Verhalten der Werkstoffe Vieweg+Teubner Verlag, 3. Auflage, Wiesbaden, 2008, ISBN 3-8351-0240-8 Englische Ausgabe:
Optimization of EBM build processes by localized preheat strategies
Optimization of EBM build processes by localized preheat strategies Fluid Technology and Microfluidics Dipl.-Ing. Philipp Drescher Prof. Dr.-Ing. Hermann Seitz 09.05.2016 2009 UNIVERSITÄT ROSTOCK FAKULTÄT
Dokument Ausgabe Titel (deutsch) Titel (englisch) DIN EN (en)
T56/1 Verzeichnis abgedruckter Normen (nach steigender DIN Nummern geordnet) Dokument Ausgabe Titel (deutsch) Titel (englisch) DIN EN 12543-1 DIN EN 12543-2 DIN EN 12543-3 DIN EN 12543-4 DIN EN 12543-5
Production of titanium structural parts for aeroplanes - Requirements for high performance milling -
Production of titanium structural parts for aeroplanes - Requirements for high performance milling - Prof. Dr.-Ing. B. Denkena, T. Grove Hannover, April 12th 2013 Structure Titanium a high performance
A Basic Study of Electrical Impedance Spectroscopy for Intravascular Diagnosis and Therapy Monitoring of Atherosclerosis
A Basic Study of Electrical Impedance Spectroscopy for Intravascular Diagnosis and Therapy Monitoring of Atherosclerosis Dissertation zur Erlangung des Grades des Doktors der Ingenieurwissenschaften der
Anlage zur Akkreditierungsurkunde D-PL nach DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Anlage zur Akkreditierungsurkunde D-PL-18897-01-00 nach DIN EN ISO/IEC 17025:2005 Gültigkeitsdauer: 17.05.2016 bis 02.12.2019 Ausstellungsdatum: 17.05.2016 Urkundeninhaber:
Perspektiven mit Stahl Perspectives with Steel. Material potentials for gears in the conversion of energy
Perspektiven mit Stahl Perspectives with Steel Steels for the energy technology of the future Material potentials for gears in the conversion of energy Dr.-Ing. Dipl.-Wirt. Ing. Frank Hippenstiel, BGH
Lebenslauf. geboren am 5. Mai 1970 in Zweibrücken / Deutschland verheiratet, zwei Kinder deutsche Staatsangehörigkeit
Lebenslauf Professor Dr. rer. nat. Alexander Hartmaier Lehrstuhl Micromechanical Modelling of Macroscopic Material Behaviour Interdisciplinary Centre for Advanced Materials Simulation (ICAMS) Ruhr-Universität
Wissenschaftliche Veröffentlichungen 2010
Wissenschaftliche Veröffentlichungen 2010 Händel, M.; Nickel, D.; Alisch, G.; Lampke, T.: Hartanodisieren einer grob- und ultrafeinkörnigen Aluminium-Kupfer-Legierung mit inkorporierten Aluminiumoxid-
Kursbeschreibungen Wahlpflichtfächer Design
IMW5.1 Human Machine Interface -Exploring the design disciplines involved in HMI systems (industrial and interaction design) to understand their interdependences as well as their role in the design of
Methoden moderner Röntgenphysik II Methods in modern X-ray physics II
Methoden moderner Röntgenphysik II Methods in modern X-ray physics II Lectures for Haupt/Masterstudiengang Physik SS2010 including Proseminar and Exercises http://hasylab.desy.de/science/studentsteaching/lectures/ss10/index_eng.html
New ways of induction heating in the injection moulding process
New ways of induction heating in the injection moulding process Micro Technology innovation forum Villingen-Schwenningen February 29, 2012 Dipl.-Ing. M. Maier Prof. Dr.-Ing. W. Schinköthe Institut für
Antrag auf Anerkennung von Prüfungsleistungen im Masterstudiengang Materials Science
Antrag auf Anerkennung von Prüfungsleistungen im Masterstudiengang Materials Science gemäß 9 der Prüfungsordnung für den Masterstudiengang Materials Science vom 11.Mai 2 (PO MAMatSc) Request of Transfer
Titanium The heaviest light metal
Titanium The heaviest light metal Dan Snitkovsky Uniweld Israel FRONIUS International GmbH Buxbaumstr. 2 4600 Wels Titanium The heaviest light metal 0,5g/cm³ 4,5g/cm³ Heavy metal Lithium - light metal
SHAPE MORPHING OF FLEXIBLE SURFACES AND ACTUATOR INTERACTION
SHAPE MORPHING OF FLEXIBLE SURFACES AND ACTUATOR INTERACTION Horst Baier, Leri Datashvili (LLB) Technische Universität München, Germany Research areas at LLB / TU München Advanced fiber composites / hybrid
Improbond GmbH Rest
_9240 Werkstoff-Nr. 2.4831 Streckgrenze 420 N/mm 2 Zugfestigkeit 760 N/mm 2 35 % C < 0,02 % Mn 0,20 % Cr 22,00 % Mo 9,00 % Nb 3,50 % Fe < 1,00 % -Basis-Schweißzusatz zum Laserschweißen von artgleichen
Vorlesung Waldwachstumskunde. Bio-Mechanik am Baum. Zusammenstellung: O.U. Bräker Swiss Federal Research Institute WSL, CH-8903 Birmensdorf
Vorlesung Waldwachstumskunde Bio-Mechanik am Baum Zusammenstellung: O.U. Bräker Swiss Federal Research Institute WSL, CH-8903 Birmensdorf 04.07.02 1 Übersicht: Übungen Biologie und Mechanik Reaktionsholz
Selektives Laserschmelzen von konventionellen und intermetallischen Titanlegierungen Eigenschaften und Optimierung
Selektives Laserschmelzen von konventionellen und intermetallischen Titanlegierungen Eigenschaften und Optimierung Dr. G. Kasperovich 1, H. Gherekhloo 1, Dr. J. Gussone 1, Dr. J. Hausmann 1, Dr. Y.-Ch.
Ultra Wideband Antennas, Technologies and Applications
European School of Antennas in cooperation with the COST Action TU1208 Civil Engineering Applications of GPR Ultra Wideband Antennas, Technologies and Applications Karlsruhe, Germany, April 20. 24. 2015
Forschungsbereich Polymere Werkstoffe für die Photovoltaik
Forschungsbereich Polymere Werkstoffe für die Photovoltaik Dr. Gernot Oreski Polymer Competence Center Leoben GmbH Roseggerstraße 12 8700 Leoben, Austria +43 3842 42962 51 oreski@pccl.at Polymer Competence
Stahl-Zentrum. Koksqualität und Hochofenleistung - Theorie und Praxis. Düsseldorf, 05. Dezember Peter Schmöle
Koksqualität und Hochofenleistung - Theorie und Praxis Düsseldorf, 05. Dezember 2013 1 ThyssenKrupp Steel Europe Coke quality and blast furnace performance Introduction Roles of coke Flooding effects Effects
Courseware / Vorlesungsmaterial Professor Dierk Raabe Max-Planck-Institut für Eisenforschung, Düsseldorf, Germany
Courseware / Vorlesungsmaterial Professor Max-Planck-Institut für Eisenforschung, Düsseldorf, Germany Methoden der theoretischen und experimentellen Untersuchung der plastischen Dehnung auf Kornebene Abteilung
Fluid-Particle Multiphase Flow Simulations for the Study of Sand Infiltration into Immobile Gravel-Beds
3rd JUQUEEN Porting and Tuning Workshop Jülich, 2-4 February 2015 Fluid-Particle Multiphase Flow Simulations for the Study of Sand Infiltration into Immobile Gravel-Beds Tobias Schruff, Roy M. Frings,
Selection catalog on Specialization Subjects (state of )
Master Course in Materials Science Selection catalog on Specialization Subjects (state of 04.04.2016) Materials Specialization I & II Zwei Spezialisierungsfächer werden gewählt aus den Optionen: Modul
CFRP chopper discs: state of the art and long term perspective
CFRP chopper discs: state of the art and long term perspective Valeria Antonelli Faculty of Mechanical Engineering Technische Universität München Germany September 8 th, 2015 - DENIM - Budapest Research
Prof. Dr. rer. nat. Jürgen Göken
Prof. Dr. rer. nat. Jürgen Göken Referierte Veröffentlichungen in wissenschaftlichen Zeitschriften Göken, J.; Swiostek, J.; Riehemann, W.; Trojanová, Z.; Lukác(, P.: Influence of Heat Treatment on Electrical
Determining Vibro-Acoustic Effects in Multidomain Systems using a Custom Simscape Gear Library
Determining Vibro-Acoustic Effects in Multidomain Systems using a Custom Simscape Gear Library Tim Dackermann, Rolando Dölling Robert Bosch GmbH Lars Hedrich Goethe-University Ffm 1 Power Noise transmission
- Characteristic sensitive Small temperature differences. - Low Sensitivity 42,8 µv/k for Cu-Constantan
Thermocouples + Lightweight Small backlash by deformations + No self heating + Physically defined Zero No calibration for control loops - Characteristic sensitive Small temperature differences to cable
Übersicht Eurocodes. Björnstjerne Zindler Letzte Revision: 24. Oktober Eurocode 0: Grundlagen der Tragwerksplanung EN
Übersicht Eurocodes Björnstjerne Zindler Letzte Revision: 24. Oktober 2012 Inhaltsverzeichnis 1 Eurocode 0: Grundlagen der Tragwerksplanung EN 1990 2 2 Eurocode 1: Einwirkungen auf Tragwerke EN 1991 3
Heterogeneous microstructures In situ testing, image processing and stochastic modeling
Sommerschule 2016 Heterogeneous microstructures In situ testing, image processing and stochastic modeling 21. - 23.03.2016 TU Kaiserslautern Stochastic Models for Innovations in the Engineering Sciences
FLOXCOM - WP 7 Modelling and Optimisation of Wall Cooling - Wall Temperature and Stress Analysis
FLOXCOM - WP 7 Modelling and Optimisation of Wall Cooling - Wall Temperature and Stress Analysis B&B-AGEMA Dr.-Ing. K. Kusterer 1. Status report 2. 3-D simulation of final combustor geometry 3. Publications
Atline Inspection of Casting Production Process at Volkswagen using VG Inline
Atline Inspection of Casting Production Process at Volkswagen using VG Inline Atline Inspection of Casting Production Process at Volkswagen using VG Inline Authors: Dr.-Ing. Raimund Rösch, Frank Jeltsch
Electricity Generation from Geothermal Heat and other Sustainable Energy Technologies
Electricity Generation from Geothermal Heat and other Sustainable Energy Technologies Martin Wendland, Ngoc Anh Lai, Gerald Koglbauer, Johann Fischer University for Natural Resources and Applied Life Sciences
Cleanroom Fog Generators Volcano VP 12 + VP 18
Cleanroom Fog Generators Volcano VP 12 + VP 18 Description & Functional Principle (Piezo Technology) Cleanrooms are dynamic systems. People and goods are constantly in motion. Further installations, production
Ruhr-Universität Bochum Fakultät für Maschinenbau Lehrstuhl Werkstoffwissenschaft
Ruhr-Universität Bochum Fakultät für Maschinenbau Lehrstuhl Werkstoffwissenschaft Adresse Universitätsstraße 150 44801 Bochum Deutschland Telefon +49 234 32-23022 Telefax +49 234 32-14235 E-Mail gunther.eggeler@rub.de
Curriculum vitae. Mag. Dr. Jürgen Spitaler. Ausbildung und Berufserfahrung
Curriculum vitae Mag. Dr. Jürgen Spitaler Ausbildung und Berufserfahrung seit 01/2008 Leiter der Gruppe für Atomistic Modeling (derzeit 7 Mitarbeiter) am Materials Center Leoben Forschung GmbH; zahlreiche
Eingeladene Vorträge bei Kolloquien und Seminaren
Eingeladene Vorträge bei Kolloquien und Seminaren Die Manifestation der starken Kraft in der Struktur vom Nukleon und Atomkernen Physikalisches Kolloquium Universität Mainz, 20.12. 2005 Experimente zur
Nano-Stähle, 3-Dimensionale Orientierungs-Elektronenmikroskopie und metallphysikalische Simulation der Umformung
Raabe, Dierk Nano-Stähle, 3-Dimensionale... Tätigkeitsbericht 2005 Festkörperforschung/Materialwissenschaften Nano-Stähle, 3-Dimensionale Orientierungs-Elektronenmikroskopie und metallphysikalische Simulation
Improbond GmbH Rest
_4009 Werkstoff-Nr. 1.4009 Streckgrenze 380 N/mm 2 Zugfestigkeit 550 N/mm 2 15 % Härte 150 HB Hardness C 0,10 % Si 0,50 % Mn 0,60 % Cr 11,50 13,50 % Mo 0,60 % Martensitischer Schweißzusatz zum Laserschweißen
1. Metallurgical reactions in melts 2. Pouring properties a) Physical properties b) Mold filling capacity
Degree course: Module description: Short term: Subtitle: Lectures: M. Sc. Werkstofftechnik Gießereiprozesstechnik GieProTech Gießereiprozesstechnik I Gießereiprozesstechnik II Semester: 1. or 3.; 2. Responsible
Qun Wang (Autor) Coupled Hydro-Mechanical Analysis of the Geological Barrier Integrity Associated with CO2 Storage
Qun Wang (Autor) Coupled Hydro-Mechanical Analysis of the Geological Barrier Integrity Associated with CO2 Storage https://cuvillier.de/de/shop/publications/7328 Copyright: Cuvillier Verlag, Inhaberin
Enfluss von Eigenspannungen auf das Verhalten von Fehlern in Schweißverbindungen
Enfluss von Eigenspannungen auf das Verhalten von Fehlern in Schweißverbindungen Dieter Siegele Fraunhofer-Institut für Werkstoffmechanik, Freiburg Festkolloquium anlässlich des 75. Geburtstags von Professor
Simulating the Idle: A New Load Case for Vehicle Thermal Management
Simulating the Idle: A New Load Case for Vehicle Thermal Management Jan Eller FKFS / IVK University of Stuttgart Thomas Binner and Heinrich Reister Daimler AG Nils Widdecke and Jochen Wiedemann FKFS /
Various Other Oxides / Verschiedene andere Oxide
Landolt-Börnstein: Numerical Data and Functional Relationships in Science and Technology - New Series 27G Various Other Oxides / Verschiedene andere Oxide Bearbeitet von G Albanese, A Deriu, J.E Greedan,
FVV. igung» < ^ berichte der Forschungsstellen, gehalten auf der "' am 15. April 2010 in Bad Neuenahr. Heft R550-2010 Bad Neuenahr
Heft R550-2010 Bad Neuenahr r,»» igung» < *«#* FVV ^ berichte der Forschungsstellen, gehalten auf der "' am 15. April 2010 in Bad Neuenahr.. 5. -*,;> Gemeinsame Forschung. Gemeinsamer Erfolg. Programm
Thermo-mechanical Simulation
Schweißtechnische Lehr- und Versuchsanstalt Mecklenburg-Vorpommern GmbH Thermo-mechanical Simulation with a GLEEBLE 3500 Content Definition, Background Facility Equipment Technical features Application
Charakterisierung von Cordierite mit unterschiedlichen Methoden (X-ray, Neutronen)
Symposium Zerstörungsfreie Materialcharakterisierung Vortrag 4 Charakterisierung von Cordierite mit unterschiedlichen Methoden (X-ray, Neutronen) Giovanni BRUNO *, Karsten EHRIG *, Manfred P. HENTSCHEL
PROFICOIL. Professional Thread Repairing System
PROFICOIL Professional Thread Repairing System GEWINDEREPARATUR THREAD REPAIRING PROFICOIL Gewindereparatur-Sortimente Thread Repairing Assortments metrisch / metrisch fein 3 Gewindereparatur-Sets Thread
Simulation of Cold Forging. - examples of applications from around the world - Dr. Gerhard H. Arfmann CPM GmbH, Herzogenrath
Simulation of Cold Forging - examples of applications from around the world - Dr. Gerhard H. Arfmann CPM GmbH, Herzogenrath 1 CV Dr. Arfmann Till 1974 High School at Kreisgymnasium Halle, Halle Westfalen,
RECORD HD. Schnittwertempfehlung / Cutting data TECHNISCHE DATEN / TECHNICAL DATA
Der ILIX Bohrer ist seit Jahren eine feststehende Größe in der Stahlbearbeitung. The ILIX is an established drill for the machining of steel. 26 TECHNISCHE DATEN / TECHNICAL DATA Hauptmerkmale: Spanbrechende
https://cuvillier.de/de/shop/publications/6886
Kristofer Leach (Autor) Modelling Force Transfer in Boundary Layers of Moving Walls for Compressible and Incompressible Turbulent Flows Across Multiple Scales https://cuvillier.de/de/shop/publications/6886
Technische Universität Kaiserslautern Lehrstuhl für Virtuelle Produktentwicklung
functions in SysML 2.0 La Jolla, 22.05.2014 12/10/2015 Technische Universität Kaiserslautern Lehrstuhl für Virtuelle Produktentwicklung Dipl. Wirtsch.-Ing. Christian Muggeo Dipl. Wirtsch.-Ing. Michael
Zerstörungsfreie Untersuchung von Brennstoffzellen und Batterien mit bildgebenden Röntgen- und Neutronen-Verfahren
Zerstörungsfreie Untersuchung von Brennstoffzellen und Batterien mit bildgebenden Röntgen- und Neutronen-Verfahren Ingo Manke Helmholtz-Zentrum Berlin für Materialien und Energie ÜBERSICHT Prinzip der
S- SAITPOL STRIPS / BÖGEN R-SAITPOL ROLLS / ROLLEN
NON-WOVEN VLIES S- SAITPOL STRIPS / BÖGEN R-SAITPOL ROLLS / ROLLEN S-SP R-SP CA CC GP MA VF UF UFS SA S-SP R-SP 120 x 280 mm 152 x 229 mm 115 x 10 m glazing operations and metals flatting accurate finish
Keramiken für die Energietechnik
Siemens Corporate Technology Januar 2015 Keramiken für die Energietechnik Bonn, 20.01.2015 Unrestricted Siemens AG 2015. All rights reserved Komplexe Energienetze erfordern viele neue Lösungen Page 2 Jan
Materialwissenschaft 1. Prüfungszeitraum 1. Woche
Materialwissenschaft 1. Prüfungszeitraum 1. Woche 26.01.2016 Donnerstag Freitag Samstag Sonntag Montag Dienstag Mittwoch 11.02.2016 12.02.2016 13.02.2016 14.02.2016 15.02.2016 16.02.2016 17.02.2016 Physik
Veröffentlichungen Pabel T., Kneißl C., Schumacher P. Pabel T., Kneißl C., Schumacher P. Hofer P., Kaschnitz E., Schumacher P.
Veröffentlichungen Dambauer G., Pabel T., Kneißl C., Deutliche Einsparungen bei der Wärmebehandlung von untereutektischen Aluminium-Silizium-Legierungen durch modifizierte Parameter Metall, 1-2/2011, S.
Rapf, Raupenstrauch, Thomanetz, Edlinger Phosphorrückgewinnung aus Klärschlamm 7 Orientierende Angaben zum Schwermetallrückhaltevermögen von Klärschlamm Kon ze ntrati o n i n µg / L Zulauf Ablauf Konzentrationen
Introduction to the diploma and master seminar in FSS 2010. Prof. Dr. Armin Heinzl. Sven Scheibmayr
Contemporary Aspects in Information Systems Introduction to the diploma and master seminar in FSS 2010 Chair of Business Administration and Information Systems Prof. Dr. Armin Heinzl Sven Scheibmayr Objective
Laserstrahlschweißen im Flugzeugbau
Kongress: Neueste Entwicklungen der industriellen Lasertechnik 20. Oktober 2005 Presented by Jörg Schumacher Manager Metal Technology Bremen Laserstrahlschweißen im Flugzeugbau The Airbus Product Range
New X-ray optics for biomedical diagnostics
New X-ray optics for biomedical diagnostics Franz Pfeiffer, Julia Herzen Technical University Munich, Physics-Department, Chair for Biomedical Physics (E17) Jürgen Mohr, Johannes Kenntner Karlsruhe Institute
Passively aligned fiber-coupling of planar integrated waveguides
Passively aligned fiber-coupling of planar integrated waveguides Johannes Kremmel SPPL-Event: Miniaturized Photonic Packaging Alpnach Acknowledgement Research in cooperation with vario-optics ag, Heiden
Bayerisches Landesamt für Gesundheit und Lebensmittelsicherheit Pool water quality the German philosophy
Bayerisches Landesamt für Gesundheit und Lebensmittelsicherheit Pool water quality the German philosophy Christiane Höller Bavarian Health and Food Safety Authority Legal regulations 1979 Federal Law on
Einfluss der Retrogressions und Reaging Behandlung auf Gefügeausbildung und Festigkeit einer AlZnMgCu Legierung
Werkstoff-Kolloquium 2008 Einfluss der Retrogressions und Reaging Behandlung auf Gefügeausbildung und Festigkeit einer AlZnMgCu Legierung D. Pöschmann [1], C. Melzer [2], M. Kühlein [1], M. Schaper [3]
Efficient Monte Carlo Simulation of Tunnel Currents in MOS Structures
Efficient Monte Carlo Simulation of Tunnel Currents in MOS Structures D. Grgec, M.I. Vexler, C. Jungemann, B. Meinerhagen Grg-P/02-1 Presentation Outline Introduction: quantum effects in MOS structures
Wearable Computing im Gesundheitswesen
Wearable Computing im Gesundheitswesen Dipl.-Ing. Dr. techn. Wolfgang Vorraber, Univ.-Prof. Dipl.-Ing. Dr. techn. Siegfried Vössner, Dipl.-Ing. Dietmar Neubacher, Technische Universität Graz, Österreich
Processing of aluminum alloys in the semi-solid state basic principles and constitutive models
Research Collection Doctoral Thesis Processing of aluminum alloys in the semi-solid state basic principles and constitutive models Author(s): Wahlen, Arne Publication Date: 2001 Permanent Link: https://doi.org/10.3929/ethz-a-004174928
Seleced Papers and Patents
Prof. Dr. Thomas Lampke Seleced Papers and Patents 1 Wielage, B.; Lampke, Th.: Innovative Werkstoffe aus naturfaserverstärktem Polymer. Ingenieur Werkstoffe, Vol.7 (1998) Nr.4, S. 44-46, ISSN 1436-5456
Vertical Dynamic Test Rig for Integration in a Realtime Vehicle Simulation Model. Apply & Innovate 2016 Prof. Dr. Marcus Jautze
Vertical Dynamic Test Rig for Integration in a Realtime Vehicle Simulation Model Apply & Innovate 2016 Prof. Dr. Marcus Jautze 20.09.2016 Short Overview. University of applied sciences Landshut Landshut
Possible Contributions to Subtask B Quality Procedure
Possible Contributions to Subtask B Quality Procedure aeteba - Energy Systems, Germany Elmar Sporer zafh.net Stuttgart, Germany Dr. Dirk Pietruschka 1/14 aeteba - Consortium of different companies - Turnkey
TH Köln Institute of Agricultural Engineering and Renewable Energies. TU-Dresden Chair of Agricultural Systems and Technology
TH Köln Institute of Agricultural Engineering and Renewable Energies TU-Dresden Chair of Agricultural Systems and Technology Contributing Project Partners: Slide 1 AGENDA 1. Complexity of AG Processes
Accuracy Examinations in Powder Injection Compression Moulding
Accuracy Examinations in Powder Injection Compression Moulding V. Piotter, A. Klein, T. Mueller, K. Plewa INSTITUTE FOR APPLIED MATERIALS - (IAM WK) KIT Universität des Landes Baden-Württemberg und nationales
Masterstudium CHEMICAL AND PHARM. ENGINEERING laut Mitteilungsblatt vom (Stück 25.b)
ab 01.10.2017 (Änderung) Plan nach ECTS Prüfungsreferat der Naturwissenschaftlichen Fakultät Karl-Franzens-Universität Graz Masterstudium CHEMICAL AND PHARM. ENGINEERING laut Mitteilungsblatt vom 29.03.2017
Trag Werk Holz Bau. Trag Werk Holz Bau. Trag Werk Holz Bau. Trag Werk Holz Bau. Trag Werk Holz Bau. Trag Werk Holz Bau. Trag Werk Holz Bau
Contents URBAN WOOD Multi Storey Timber Buildings WOOD & THE CITY... Wood Based Building Design for Sustainable Urban Development Training & Research Program ˆURBAN WOOD Y. Amino, M.eng. Dr.sc.tech Contents
Masterstudium PHYSICS laut Mitteilungsblatt vom (Stück 25.e)
SPO ab 01.10.2017 (Neu) Plan nach ECTS Prüfungsreferat der Naturwissenschaftlichen Fakultät Karl-Franzens-Universität Graz Masterstudium PHYSICS laut Mitteilungsblatt vom 29.03.2017 (Stück 25.e) Matrikel-Nr.
Mikrostrukturierten Durchflusszytometer
Hydrodynamische Fokussierung in Mikrostrukturierten Durchflusszytometer Hydrodynamische Fokussierung Patentstruktur Neue Strukturen Was, Wozu TU Berlin / PTB RWTH Aachen, Micronit Microfluidics BV Hydrodynamic
PROF DR DIPL-ING PETER E PFEFFER
Aumillerstrasse 6 82340 Feldafing Deutschland Telefon: +49 / 8157 / 925 567 E-Mail: p.e.pfeffer@hm.edu 18. MAI 2008 VERÖFFENTLICHUNGEN, VORTRÄGE, PATENTE VERÖFFENTLICHUNGEN Ohlendorf J., Pfeffer P., Barthelt
Micro-fiber cement pullout tests, uniaxial tensile tests and material scaling
Research Collection Doctoral Thesis Micro-fiber cement pullout tests, uniaxial tensile tests and material scaling Author(s): Rieger, Carsten Publication Date: 2010 Permanent Link: https://doi.org/10.3929/ethz-a-006342957
Through-process model for the microstructure of dual-phase steel
Through-process model for the microstructure of dual-phase steel Von der Fakultät für Georessourcen und Materialtechnik der Rheinisch-Westfälischen Technischen Hochschule Aachen zur Erlangung des akademischen
WELDING ARTICLE. Plasma welding with aluminium materialsdirect or alternating current? Plasma welding
Plasma welding with aluminium materialsdirect or alternating current? Application example of plasma welding at the positive pole Plasma welding at the positive pole, keyhole process, I=100A, U=40V, v S
Damage Tolerance and Fatigue Behaviour of Composites
Damage Tolerance and Fatigue Behaviour of Composites Univ.-Prof. Dr. mont. Gerald Pinter Chair of Materials Science and Testing of Polymers, Montanuniversitaet Leoben FACC Technical Colloquium Advances
Newest Generation of the BS2 Corrosion/Warning and Measurement System
Newest Generation of the BS2 Corrosion/Warning and Measurement System BS2 System Description: BS2 CorroDec 2G is a cable and energyless system module range for detecting corrosion, humidity and prevailing
Probabilistic LCF - investigation of a steam turbine rotor under transient thermal loads
Probabilistic LCF - investigation of a steam turbine rotor Dipl. -Ing. David Pusch TU Dresden Professur für Turbomaschinen und Strahlantriebe Prof. Konrad Vogeler Dr. Ralf Voß Siemens AG Steam Turbines
XXXVI. Verformungkundliches Kolloquium
XXXVI. Verformungkundliches Kolloquium von 18.03. bis 22.03.2017 am Zauchensee in 1350 m Seehöhe www.metalforming.com Lehrstuhl für Umformtechnik Department Product Engineering XXXVI. Verformungskundliches
Master-Studiengang Maschinenbau Informationen zur Vertiefungsrichtung Werkstoffe und Strukturen für Hochleistungssysteme
Master-Studiengang Maschinenbau Informationen zur Vertiefungsrichtung Werkstoffe und Strukturen für Hochleistungssysteme Prof. Dr. M. Heilmaier, 28. Januar 2015, 16:00-16:25 Uhr, Benz-Hörsaal INSTITUT