Hyper SIDELED Hyper-Bright Low Current LED Lead (Pb) Free Product - RoHS Compliant LG A67K, LP A67K Released Besondere Merkmale Gehäusetyp: weißes SMT Gehäuse, farbloser klarer Verguss Besonderheit des Bauteils: Abstrahlung parallel zur Platine, deshalb ideal zur Einkopplung in Lichtleiter Wellenlänge: 57 nm (grün), 56 nm (pure green) Abstrahlwinkel: Lambertscher Strahler (1 ) Technologie: InGaAlP optischer Wirkungsgrad: 4 lm/w (grün), 1, lm/w (pure green) Gruppierungsparameter: Lichtstärke, Wellenlänge Verarbeitungsmethode: für alle SMT-Bestücktechniken geeignet Lötmethode: Reflow Löten Vorbehandlung: nach JEDEC Level Gurtung: 1-mm Gurt mit /Rolle, ø33 mm ESD-Festigkeit: ESD-sicher bis kv nach JESD-A114-D Erweiterte Korrosionsfestigkeit: Details siehe Seite 9 Anwendungen optischer Indikator Einkopplung in Lichtleiter Hinterleuchtung (LCD, Schalter, Tasten, Displays, Werbebeleuchtung) Innenbeleuchtung im Automobilbereich (z.b. Instrumentenbeleuchtung) Markierungsbeleuchtung Signal- und Symbolleuchten Features package: white SMT package, colorless clear resin feature of the device: radiation direction parallel to PCB, so an ideal LED for coupling in light guides wavelength: 57 nm (green), 56 nm (pure green) viewing angle: Lambertian Emitter (1 ) technology: InGaAlP optical efficiency: 4 lm/w (green), 1. lm/w (pure green) grouping parameter: luminous intensity, wavelength assembly methods: suitable for all SMT assembly methods soldering methods: reflow soldering preconditioning: acc. to JEDEC Level taping: 1 mm tape with /reel, ø33 mm ESD-withstand voltage: up to kv acc. to JESD-A114-D Superior Corrosion Robustness: details see page 9 Applications optical indicators coupling into light guides backlighting (LCD, switches, keys, displays, illuminated advertising) interior automotive lighting (e.g. dashboard backlighting) marker lights signal and symbol luminaire 1-6-15 1
Bestellinformation Ordering Information Typ Type LG A67K-HK1-4 LG A67K-GK1-4 LP A67K-E1F-5 LP A67K-F1G-5 LP A67K-E1G-5 Emissionsfarbe Color of Emission 1) Seite 15 Lichtstärke Luminous 1) page 15 Intensity I V (mcd) green 3.55... 9..4... 9. pure green.71... 1.8 1.1....8.71....8 ) Seite 15 Lichtstrom Luminous Flux Φ V (mlm) 19 (typ.) 17 (typ.) 4 (typ.) 6 (typ.) 5 (typ.) Bestellnummer Ordering Code Q6511A9 Q6511A91 Q6511A9 Q6511A93 Q6511A94 Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 5 für nähere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Gurt und Farbe geliefert. Z.B.: LG A67K-GJ1-4 bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen G, H1, H oder J1 enthalten ist. Um die Liefersicherheit zu gewährleisten, können einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt für die Farben, bei denen Wellenlängengruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Wellenlängengruppe geliefert. Z.B.: LG A67K-GJ1-4 bedeutet, dass auf dem Gurt nur eine der Wellenlängengruppen -, -3 oder -4 enthalten ist (siehe Seite 5 für nähere Information). Um die Liefersicherheit zu gewährleisten, können einzelne Wellenlängengruppen nicht bestellt werden. Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 5 for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). E.g. LG A67K-GJ1-4 means that only one group G, H1, H or J1 will be shippable for any one reel and color. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. E.g. LG A67K-GJ1-4 means that only 1 wavelength group -, -3 oder -4 will be shippable. In order to ensure availability, single wavelength groups will not be orderable (see page 5 for explanation). Vergleichstabelle für 1 ma Correllation Table for 1 ma Typ Type LG A67K-HK1-4 LG A67K-GK1-4 LP A67K-E1F-5 LP A67K-F1G-5 LP A67K-E1G-5 Emissionsfarbe Color of Emission Lichtstärke 1) Seite 15 Luminous Intensity I V (mcd) green 3.55... 9..4... 9. pure green.71... 1.8 1.1....8.71....8 1) page 15 Siehe auch Grafik auch Seite 7 / see also graph on page 7 Lichtstärke ) Seite 15 Luminous Intensity I F = 1 ma I V (mcd) 4 (typ.) 37 (typ. 8 (typ.) 13 (typ.) 1 (typ. Lichtstrom ) Seite 15 Luminous Flux I F = 1 ma Φ V (mlm) 15 (typ.) 11 (typ. 5 (typ.) 4 (typ.) 35 (typ. 1-6-15
Grenzwerte Maximum Ratings Bezeichnung Parameter Betriebstemperatur Operating temperature range Lagertemperatur Storage temperature range Sperrschichttemperatur Junction temperature Durchlassstrom Forward current (T A =5 C) Stoßstrom Surge current t 1 µs, D =.5, T A =5 C 3)Seite 15 Sperrspannung Reverse voltage (T A =5 C) 3) page 15 Leistungsaufnahme Power consumption (T A =5 C) Wärmewiderstand Thermal resistance Sperrschicht/Umgebung 4) page 15 Junction/ambient Sperrschicht/Lötpad Junction/soldering point 4)Seite 15 Symbol Symbol LG Wert Value LP T op 4 + 1 C T stg 4 + 1 C T j + 15 C I F ma I FM 1 ma V R 1 V Einheit Unit P tot 4 mw R th JA R th JS 48 5 K/W K/W 1-6-15 3
Kennwerte Characteristics (T A = 5 C) Bezeichnung Parameter Wellenlänge des emittierten Lichtes Wavelength at peak emission 5) Seite 15 Dominantwellenlänge 5) page 15 Dominant wavelength Spektrale Bandbreite bei 5 % I rel max Spectral bandwidth at 5 % I rel max (typ.) (typ.) Symbol Symbol LG Werte Value LP λ peak 57 56 nm λ dom 57* 4/+5 56* ± 6 Einheit Unit nm λ nm Abstrahlwinkel bei 5 % I V (Vollwinkel) (typ.) ϕ 1 1 Grad Viewing angle at 5 % I V deg. 6) Seite 15 Durchlassspannung (min.) 6) page 15 Forward voltage (typ.) (max.) Sperrstrom (typ.) Reverse current (max.) V R = 1 V Temperaturkoeffizient von λ peak Temperature coefficient of λ peak ; 1 C T 1 C Temperaturkoeffizient von λ dom Temperature coefficient of λ dom ; 1 C T 1 C Temperaturkoeffizient vonv F Temperature coefficient of V F ; 1 C T 1 C Optischer Wirkungsgrad Optical efficiency * Einzelgruppen siehe Seite 5 Individual groups on page 5 (typ.) (typ.) (typ.) (typ.) V F V F V F 1.7 1.8. I R.1 I R 1 1.7 1.8..1 1 V V V µa µa TC λpeak.11.1 nm/k TC λdom.1.1 nm/k TC V.3.5 mv/k η opt 4 1. lm/w 1-6-15 4
5) Seite 15 Wellenlängengruppen (Dominantwellenlänge) 5) page 15 Wavelength Groups (Dominant Wavelength) Gruppe Group pure green green Einheit min. max. min. max. Unit 554 557 566 569 nm 3 557 56 569 57 nm 4 56 563 57 575 nm 5 563 566 nm Helligkeits-Gruppierungsschema Brightness Groups Helligkeitsgruppe Brightness Group E1 E F1 F G1 G H1 H J1 J K1 Anm.: Note: 1) Seite 15 Lichtstärke Luminous Intensity I V (mcd).71....9.9... 1.1 1.1... 1.4 1.4... 1.8 1.8....4.4....8.8... 3.55 3.55... 4.5 4.5... 5.6 5.6... 7.1 7.1... 9. 1) page 15 ) Seite 15 Lichtstrom Luminous Flux Φ V (mlm).5 (typ.) 3. (typ.) 3.8 (typ.) 4.8 (typ.) 6. (typ.) 7.6 (typ.) 9.5 (typ.) 1. (typ.) 15. (typ.) 19. (typ.) 4. (typ.) Die Standardlieferform von Serientypen beinhaltet eine untere bzw. obere Familiengruppe. Diese besteht aus 3 bzw. 4 Helligkeitsgruppen. Einzelne Helligkeitsgruppen sind nicht bestellbar. The standard shipping format for serial types includes a lower or upper family group of 3 or 4 individual brightness groups. Individual brightness groups cannot be ordered. Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: H1-3 Example: H1-3 Helligkeitsgruppe Brightness Group H1 3 Anm.: Note: Wellenlänge Wavelength In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe für jede Selektion enthalten. No packing unit / tape ever contains more than one brightness group. 1-6-15 5
) Seite 15 Relative spektrale Emission Relative Spectral Emission V(λ) = spektrale Augenempfindlichkeit / Standard eye response curve I rel = f (λ); T A = 5 C; 1 % OHL57 I rel 8 V λ 6 4 pure-green green 4 45 5 55 6 65 nm 7 λ ) Seite 15 Abstrahlcharakteristik Radiation Characteristic I rel = f (ϕ); T A = 5 C 4 3 1 OHL166 ϕ 1. 5.8 6 7 8 9.6.4. 1 1..8.6.4 4 6 8 1 1 1-6-15 6
) Seite 15 Durchlassstrom Forward Current I F = f (V F ); T A = 5 C 1 ma I F 1 1 1 OHL8 ) 7) Seite 15 Relative Lichtstärke Relative Luminous Intensity I V /I V( ma) = f (I F ); T A = 5 C I I V 1 V ( ma) 1 1 ) 7) page 15 OHL81 1-1 1 1-1 -3 1.4 1.6 1.8. V. 1 1 ma V I F F ) Seite 15 Relative Lichtstärke Relative Luminous Intensity I V / I V (5 C)= f (T j ); 1-1 3. 1 1 OHL8 I V I V (5 C). 1.5 1..5-6 -4-4 6 C 1 T j 1-6-15 7
Maximal zulässiger Durchlassstrom Max. Permissible Forward Current I F = f (T A ) I F 5 ma OHL149 T A T S 15 1 5 TA temp. ambient T temp. solder point S 4 6 8 C 1 T Zulässige Impulsbelastbarkeit I F = f (t p ) Permissible Pulse Handling Capability Duty cycle D = parameter, T A = 5 C I F.1 A.1 D = t P T t P T OHL44 I F Zulässige Impulsbelastbarkeit I F = f (t p ) Permissible Pulse Handling Capability Duty cycle D = parameter, T A = 85 C I F.1 A.1 D = t P T t P T OHL44 I F.8.6.4 D =.5.1..5.1..5 1.8.6.4 D =.5.1..5.1..5 1.. 1-5 -4-3 1 1 1-1 -1 1 t p 1 1 s 1 1-5 -4-3 1 1 1-1 -1 1 t p 1 1 s 1 1-6-15 8
8) Seite 15 Maßzeichnung 8) page 15 Package Outlines (.4 (.94)).8 (.11).4 (.94) 4. (.165) 3.8 (.15) 1.1 (.43).7 (.8) (.85 (.11)) Cathode.54 (.1) spacing.9 (.35) Anode Cathode marking (1.4 (.55)) (.9 (.114)) (R1) (.3 (.1)) 3.8 (.15) 3.4 (.134) C A 4. (.165) 3.8 (.15) Korrosionsfestigkeit besser als EN 668--6 (method 4): mit erweitertem Korrosionstest: 4 C / 9%rh / 15ppm HS / 336h Corrosion robustness better than EN 668--6 (method 4): with enhanced corrosion test: 4 C / 9%rh / 15ppm HS / 336h GPLY688 Kathodenkennung: Cathode mark: Gewicht / Approx. weight: 8) Seite 15 Gurtung / Polarität und Lage Verpackungseinheit Method of Taping / Polarity and Orientation 8) page 15 Packing abgeschrägte Ecke bevelled edge 67 mg /Rolle, ø33 mm unit /reel, ø33 mm 1.5 (.59) 4 (.157) (.79) Cathode/Collector Marking 4.5 (.167) 8 (.315) 3.95 (.156) 5.5 (.17) 1.75 (.69) 1 (.47) OHAY73 1-6-15 9
8) Seite 15 Empfohlenes Lötpaddesign Reflow 8) page 15 Recommended Solder Pad Reflow Löten Soldering 3.7 (.146) 3. (.118) 1. (.47) Padgeometrie für verbesserte Wärmeableitung Paddesign for improved heat dissipation Cu-Fläche > 16 mm Cu-area > 16 mm Lötstopplack Solder resist OHLPY965 1-6-15 1
Lötbedingungen Vorbehandlung nach JEDEC Level Soldering Conditions Preconditioning acc. to JEDEC Level Reflow Lötprofil für bleifreies Löten (nach J-STD-D.1) Reflow Soldering Profile for lead free soldering (acc. to J-STD-D.1) 3 C T 5 4 C 17 C T p t P t L OHA455 45 C 15 t S 1 5 Anm.: Das Gehäuse ist nicht für nasschemische Reinigung geeignet. Note: Package not suitable for wetcleaning. Profile Feature Ramp-up Rate to Preheat* ) 5 C to 15 C Time t s from T Smin to T Smax (15 C to C Recommendation Pb-Free (SnAgCu) Assembly K/ s 3 K / s Max. Ratings 1 s min. 6sec max. 1sec Ramp-up Rate to Peak* ) K/ s 3 K / s 18 C to T P Liquidus Temperture T L 17 C Time t L above T L 8 s max. 1 s Peak Temperature T P 45 C max. 5 C Time t P within 5 C of the specified peak temperature T P - 5K Ramp-down Rate* T P to 1 C 5 C Time 5 C to Peak temperature 5 1 15 5 s 3 s min. 1 s max. 3 s 3 K / s 6 K / s maximum All temperatures refer to the center of the package, measured on the top of the component * slope calculation T/ t: t max. 5 s; fulfillment for the whole T-range max. 8 min. t 1-6-15 11
Barcode-Produkt-Etikett (BPL) Barcode-Product-Label (BPL) OSRAM Opto Semiconductors (6P) BATCH NO: 13456789 LX XXXX RoHS Compliant BIN1: XX-XX-X-XXX-X (1T) LOT NO: 13456789 (9D) D/C: 134 (X) PROD NO:13456789 (Q)QTY: 9999 (G) GROUP: ML Pack: R18 DEMY Temp ST 6 C R B_R999_188.164 R XX-XX-X-X OHA4563 Gurtverpackung Tape and Reel W 1 D P P F E W A N 13. ±.5 P 1 Label Direction of unreeling W Direction of unreeling Gurtvorlauf: Leader: Gurtende: Trailer: 4 mm 4 mm 16 mm 16 mm OHAY34 Tape dimensions in mm (inch) W P P 1 P D E F 1 +.3.1 4 ±.1 (.157 ±.4) 8 ±.1 (.315 ±.4) ±.5 (.79 ±.) 1.5 +.1 (.59 +.4) 1.75 ±.1 (.69 ±.4) 5.5 ±.5 (.17 ±.) Reel dimensions in mm (inch) A W N min W 1 W max 33 (13) 1 (.47) 6 (.36) 1.4 + (.488 +.79) 18.4 (.74) 1-6-15 1
_< C). _< _< C). 11 144 _< ML a C R WET Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. LG A67K, LP A67K Trockenverpackung und Materialien Dry Packing Process and Materials OSRAM Moisture-sensitive label or print Barcode label Humidity indicator Barcode label Comparator check dot 5% 1% 15% If wet, parts still adequately dry. change desiccant If wet, examine units, if necessary bake units If wet, examine units, if necessary bake units 11 144 ML a C R CAUTION This bag contains MOISTURE SENSITIVE OPTO SEMICONDUCTORS LEVEL If blank, see bar code label 1. Shelf life in sealed bag: 4 months at < 4 C and < 9% relative humidity (RH).. After this bag is opened, devices that will be subjected to infrared reflow, vapor-phase reflow, or equivalent processing (peak package body temp. If blank, see bar code label a) Mounted within at factory conditions of 3 C/6% RH. Floor time see below b) Stored at 1% RH. 3. Devices require baking, before mounting, if: a) Humidity Indicator Card is > 1% when read at 3 C ± 5 C, or b) a or b is not met. 4. If baking is required, reference IPC/JEDEC J-STD-33 for bake procedure. Bag seal date (if blank, seal date is identical with date code). Date and time opened: Moisture Level 1 Floor time > 1 Year Moisture Level 4 Floor time 7 Hours Moisture Level Floor time 1 Year Moisture Level 5 Floor time 48 Hours Moisture Level a Floor time 4 Weeks Moisture Level 5a Floor time 4 Hours Moisture Level 3 Floor time 168 Hours Moisture Level 6 Floor time 6 Hours Desiccant Humidity Indicator MIL-I-8835 OSRAM Anm.: Note: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte Bezüglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel Gurtung und Verpackung unter dem Punkt Trockenverpackung. Hier sind Normenbezüge, unter anderem ein Auszug der JEDEC-Norm, enthalten. Moisture-senisitve product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter Tape and Reel under the topic Dry Pack. Here you will also find the normative references like JEDEC. Kartonverpackung und Materialien Transportation Packing and Materials OHA539 Barcode label Barcode label CAUTION This bag contains MOISTURE SENSITIVE OPTO SEMICONDUCTORS LEVEL If blank, see bar code label 1. Shelf life in sealed bag: 4 months at < 4 C and < 9% relative humidity (RH).. After this bag is opened, devices that will be subjected to infrared reflow, vapor-phase reflow, or equivalent processing (peak package body temp. If blank, see bar code label a) Mounted within at factory conditions of 3 C/6% RH. Floor time see below b) Stored at 1% RH. 3. Devices require baking, before mounting, if: a) Humidity Indicator Card is > 1% when read at 3 C ± 5 C, or b) a or b is not met. 4. If baking is required, reference IPC/JEDEC J-STD-33 for bake procedure. Bag seal date (if blank, seal date is identical with date code). Date and time opened: Moisture Level 1 Floor time > 1 Year Moisture Level 4 Floor time 7 Hours Moisture Level Floor time 1 Year Moisture Level 5 Floor time 48 Hours Moisture Level a Floor time 4 Weeks Moisture Level 5a Floor time 4 Hours Moisture Level 3 Floor time 168 Hours Moisture Level 6 Floor time 6 Hours OSRAM Opto Semiconductors (6P) BATCH NO: 11998 (1T) LOT NO: 13GH134 Muster (X) PROD NO: 1 (9D) D/C: 45 (Q)QTY: LSY T676Bin1: P-1- Bin: Q-1- Multi TOPLEDBin3: Temp ST 4 C R 3 6 C RT Additional TEXT R77 DEMY PACKVAR: R18 (G) GROUP: P-1+Q-1 OSRAM Opto Semiconductors (6P) BATCH NO: (1T) LOT NO: 11998 13GH134 Muster (X) PROD NO: 1 (9D) D/C: 45 (Q)QTY: LSY T676 Multi TOPLED Bin1: P-1- Bin: Q-1- Bin3: Temp ST 4 C R 3 6 C RT Additional TEXT R77 PACKVAR: (G) GROUP: R18 DEMY P-1+Q-1 OSRAM Packing Sealing label OHA44 Dimensions of transportation box in mm (inch) Breite / Width Länge / length Höhe / height 35 ±5 (13,858 ±,1968±) 35 ±5 (13,858 ±,1968) 33 ±5 (1,3 ±,1968) 1-6-15 13
Revision History: 1-6-15 Previous Version: 9-1-14 Page Subjects (major changes since last revision) Date of change ordering code canceled 7-1-9 1, 9 additional information 9-1-14 1, 11 OS-PCN-1-8 1-6-15 9 OS-IN-1-17 1-6-15 Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 9) page 15 may only be used in life-support devices or systems 1) page 15 with the express written approval of OSRAM OS. 1-6-15 14
Fußnoten: 1) Helligkeitswerte werden mit einer Stromeinprägedauer von 5 ms und einer Genauigkeit von ± 11% ermittelt. ) Wegen der besonderen Prozessbedingungen bei der Herstellung von LED können typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes überein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden können. Falls erforderlich, z.b. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankündigung geändert. 3) Die LED kann kurzzeitig in Sperrichtung betrieben werden. 4) R thja ergibt sich bei Montage auf PC-Board FR 4 (Padgröße 16 mm je Pad) 5) Wellenlängen werden mit einer Stromeinprägedauer von 5 ms und einer Genauigkeit von ±1 nm ermittelt. 6) Spannungswerte werden mit einer Stromeinprägedauer von 1 ms und einer Genauigkeit von ±,1 V ermittelt. 7) Im gestrichelten Bereich der Kennlinien muss mit erhöhten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden 8) Maße werden wie folgt angegeben: mm (inch) 9) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems führen wird oder die Sicherheit oder Effektivität dieses Apparates oder Systems beeinträchtigt. 1) Lebenserhaltende Apparate oder Systeme sind für (a) die Implantierung in den menschlichen Körper oder (b) für die Lebenserhaltung bestimmt. Falls sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. Remarks: 1) Brightness groups are tested at a current pulse duration of 5 ms and a tolerance of ± 11%. ) Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 3) Driving the LED in reverse direction is suitable for short term application. 4) R thja results from mounting on PC board FR 4 (pad size 16 mm per pad) 5) Wavelengths are tested at a current pulse duration of 5 ms and a tolerance of ±1 nm. 6) Forward voltages are tested at a current pulse duration of 1 ms and a tolerance of ±.1 V. 7) In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit. 8) Dimensions are specified as follows: mm (inch) 9) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 1) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered. Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse, D-9349 Regensburg www.osram-os.com All Rights Reserved. 1-6-15 15