2012 Kardiam frézovací nástroje pro robotické systémy "Made in Germany" Vynikající kvalita od r. 1979 PŘÍSLUŠENSTVÍ PRO BEZVÝKOPOVÉ OPRAVY KANALIZACÍ
ZASTOUPENÍ PRO ČESKOU REPUBLIKU A SLOVENSKOU REPUBLIKU: Slezská 350, 561 64 Jablonné nad Orlicí Tel: +420 465 642 019, Fax: + 420 465 642 42 Mob: + 420 602 135 918
INHALTSVERZEICHNIS - Kanalsanierungswerkzeuge - ROBOTER-SYSTEME 2 bzw. Aufnahme / Gewinde KA-TE / PMO - Hächler - ProKasro-Hydro KA-TE / PMO - Hächler - ProKasro-Hydro KA-TE / PMO - Hächler - ProKasro-Hydro KA-TE / PMO-Mini - ProKasro-Hydro-Mini KA-TE / PMO-Mini - ProKasro-Hydro-Mini Sika (G 1 / ") JS (M12x1,50) Werkzeug geeignet für: Diamanttechnik für Beton + Steinzeug Diamanttechnik für Kunststoffe / Liner Hartmetalltechnik für Kalk, Wurzeln etc. Diamanttechnik für Beton + Steinzeug Diamanttechnik für Kunststoffe / Liner Hartmetalltechnik für Kalk, Wurzeln Diamanttechnik für Kunststoffe / Liner Diamanttechnik für Beton + Stein Diamanttechnik für Kunststoffe / Liner Diamanttechnik für Beton + Stein Wasserkühlung bzw. Luftkühlung wird empfohlen!!! Seiten: 1-4 5 + 6 7-8 9 10 11 12 IBG HC60, RS HC60 (M14 bzw. M8) ProKasro, IBG, I.S.T., JS, Schwalm, HF 130 (M14) ProKasro, IBG, I.S.T., JS, Schwalm, HF 130 (M14) ProKasro -light- (M10x0,75) KRE, KANGAROO, usw. ( Stift 1 / " 6,35mm) RS-Cutter, Dancutter, I.S.T., HF Climb 80 RS-Cutter, Dancutter, I.S.T., HF Climb 80 IMS, BJR, SubTech, KRE IMS, BJR, SubTech, KRE IMS Micro-Fräse Adapter Zubehör (M8x1,25) 4 ( 5 / "UNC) 8 ( 5 / "UNC) 8 ( 3 / "UNF) 8 ( 3 / "UNF) AGB Allgemeine Geschäftsbedingungen 8 Diamanttechnik für Kunststoffe / Liner Diamanttechnik für Beton + Stein Diamanttechnik für Beton + Steinzeug Diamanttechnik für Kunststoffe / Liner Diamanttechnik für Beton + Stein Diamanttechnik für Kunststoffe / Liner Diamanttechnik für Kunststoffe / Liner Diamanttechnik für Beton + Stein Diamanttechnik für Beton + Stein Hartmetalltechnik für Kalk, Wurzeln Diamanttechnik für Kunststoffe / Liner Diamanttechnik für Beton + Steinzeug Diamanttechnik für Kunststoffe / Liner Diamanttechnik für Kunststoffe / Liner Diamanttechnik für Beton + Stein 15 16/0 16/1-16/3 16/4 17/0 18/1 18/2 + 18/3 19/0 19/1 19/2 21 25 Beste Diamant-Qualität, jedoch nicht geeignet für armierten Beton! Best diamond-quality for professional tasks (not for reinforced concrete)! Diamond coating PCD tools for plastic, PVC, GFK-liners Für fast alle Werkzeuge sind auch andere Gewinde / Aufnahmen erhältlich: z.b. für 3 / "UNF-Gewinde oder für COSMIC-Werkzeugaufnahme etc. 4 Farbliche Veränderungen der Lackierung oder sonstige technische Änderungen, soweit sie der Verbesserung der Produkte und somit unseren Kunden dienen, bleiben uns vorbehalten. Die Abbildungen in diesem Katalog sind nicht maßstabgerecht. 12.07.2011
KA-TE + PMO Hächler für Beton + Steinzeug Diamond coating tools for concrete + stone Diamant-Nutenfräser Diamond groove milling tool Ø Höhe DN Segmente mm mm 300 5 33/37 44 21 49 80 009 Diamant-Einlauffräser mit Spülbohrungen Diamond inflow pipe milling tool DN 300 DN DN 300 18 85 47 21 49 60 004 200 16 70 38 21 49 59 997 Diamant-Kombifräser Diamond combi pipe milling tool DN DN -mit Federung- -elastic (spring loaded)- 300 36 97 43 21 49 60 052 Diamant-Pilzkopffräser Diamond mushroom shaped m.t. DN DN -mit Federung- -elastic (spring loaded)- 170 200 20 20 100 100 45 45 21 49 70 070 21 49 70 071 250 20 120 45 21 49 70 072 300 20 120 45 21 49 70 073 350/400 20 120 45 21 49 70 074 450/500 20 120 45 21 49 70 075 600 20 120 45 21 49 70 076 Diamant-Pilzkopf-Umfangfräser -mit Federung- Diamond mushroom shaped m.t. -elastic (spring loaded)- DN DN 170 200 30 30 116 116 45 45 21 49 70 080 21 49 70 081 250 30 136 45 21 49 70 082 300 30 136 45 21 49 70 083 350/400 30 136 45 21 49 70 084 450/500 30 136 45 21 49 70 085 600 30 136 45 21 49 70 086 1
KA-TE + PMO Hächler für Beton + Steinzeug Diamond coating tools for concrete + stone Diamant-Nutenfräser Diamond groove milling tool Ø Höhe DN Segmente mm mm 300 3 30/35 50 21 49 80 010 200 3 30/35 40 21 49 80 015 Diamant-Einlauffräser Diamond inflow pipe milling tool DN 300 DN DN Segmente Segments 300 12 83 50 21 49 60 001 300 flach 12 83 38 21 49 59 999 kleines Foto DN200: 200 8 70 38 21 49 60 005 200 flach 8 70 38 21 49 59 998 Diamant-Pilzkopffräser Diamond mushroom shaped m.t. DN DN 170 12 100 38 21 49 70 025 200 12 100 40 21 49 70 019 250 12 120 50 21 49 70 020 300 12 120 50 21 49 70 021 350/400 12 120 50 21 49 70 022 450/500 12 120 50 21 49 70 023 600 12 120 50 21 49 70 024 -mit Federung- -elastic (spring loaded)- Diamant-Pilzkopf-Umfangfräser -mit Federung- Diamond mushroom shaped m.t. -elastic (spring loaded)- DN DN 170 200 18 18 110 115 38 40 21 49 70 035 21 49 70 029 250 18 135 50 21 49 70 030 300 18 135 50 21 49 70 031 350/400 18 135 50 21 49 70 032 450/500 18 135 50 21 49 70 033 600 18 135 50 21 49 70 034 2
KA-TE + PMO + Hächler für Beton + Steinzeug Diamond coating tools for concrete + stone Diamant-Einlauffräser 15 Diamond inflow pipe milling tool 15 -konisch- -conical- DN DN 300/15 12 83 50 21 49 60 002 Diamant-Einspitzfräser Diamond inflow pipe milling tool -konisch bzw. zyl.- -conical / cylindrical- 12 80/60 kon. 74 21 49 60 021 12 80 zyl. 74 21 49 60 022 (kleines Foto): 16 80 zyl. 76 21 49 60 023 Diamant-Tellerfräser TF Diamond plate milling tool TF 8 115 35 21 49 60 011 Diamant-Nutenfräser -Sonderlängen- Diamond groove milling tool DN Segmente DN Segments 300 3 30/35 80 21 49 80 012 300 3 30/35 110 21 49 80 013 (kleines Foto): 300 6 30/35 80 21 49 80 011 Diamant-Einlauffräser -Version A- Diamond inflow pipe milling tool -Version A- DN DN 400 15 100 55 21 49 60 003 Diamant-Einlauffräser -Version B- Diamond inflow pipe milling tool -Version B- DN DN 400 12 70 60 21 49 60 006 3
KA-TE + PMO + Hächler für Beton + Steinzeug Diamond coating tools for concrete + stone Diamant-Prüfbohrkronen Diamond core bits Segmente Segments 1 Ring 25 70 21 49 80 030 6 42 70 21 49 80 034 4 56 80 21 49 80 037 5 62 52 21 49 80 040 9 102 135 21 49 80 035 - die Werkzeuge sind nicht lagermäßig, sondern nur auf Anfrage erhältlich - Diamant-Trennscheibe mit Aufnahmesockel Diamond cutting disc for stone (incl. base) Komplett-Set: 115 35 21 49 60 015 Ersatz-TS: 115 2,8 21 41 60 015 geeignet für armierten Beton, Guss, Gestein Diamant-Trennscheibe mit Aufnahmesockel Diamond cutting disc for PVC / liner (incl. base) Komplett-Set: 115 35 21 49 60 032 Ersatz-TS: 115 2,1 21 28 27 110 Achtung!! nur geeignet für Kunststoffe, Liner, Duroplaste (GFK / CFK) usw., Diamant-Frontfräser Diamond front milling tool 27 160 50 21 49 60 050 - das Werkzeug ist nicht lagermäßig, sondern nur auf Anfrage erhältlich - Diamant-Muffenfräser Diamond milling tool 3 55 50 21 49 60 030 - das Werkzeug ist nicht lagermäßig, sondern nur auf Anfrage erhältlich - 4
Kardiam GmbH & Co. KG KA-TE + PMO + Hächler Diamond coating PCD tools for plastic, PVC, GFK-liners Beste Diamant-Qualität, jedoch nicht geeignet für armierten Beton! Best diamond-quality for professional tasks (not for reinforced concrete)! Diamant-Nutenfräser Diamond groove milling tool 15 berechnete 25 65 21 49 40 011 (siehe großes Foto) 9 berechnete 25 50 21 49 40 033 (siehe kleines Foto) Diamant-Einlauffräser mit Spannuten Diamond inflow pipe milling tool (cutting head) 33 70 40 21 49 40 073 berechnete Diamond cone milling tool 20 berechnete 75/20 50 21 49 40 012 (siehe großes Foto) 16 berechnete 55/15 38 21 49 40 046 (siehe kleines Foto) Diamant-Zylinderfräser Diamond cylinder milling tool 25 berechnete 55 35 21 49 40 013 Diamant-Radienfräser Diamond radius milling tool 27 berechnete 90 30 21 49 40 023 5
KA-TE + PMO + Hächler Diamond coating PCD tools for plastic, PVC, GFK-liners Beste Diamant-Qualität, jedoch nicht geeignet für armierten Beton! Best diamond-quality for professional tasks (not for reinforced concrete)! Diamant-Pilzkopffräser Diamond mushroom shaped m.t. DN DN -mit Federung- -elastic (spring loaded)- 250-300 33 120 30 21 49 40 041 berechnete weitere DN auf Anfrage Diamant-Einlauffräser - Pilzform DN 300- Diamond inflow pipe milling tool 18 90 40 21 49 40 010 berechnete Diamant-Einlauffräser DN 300 Diamond inflow pipe milling tool (cutting head) 30 70 42 21 49 40 034 berechnete 6
KA-TE + PMO + Hächler Hartmetallwerkzeuge für Kalk, Wurzeln usw. Carbide coating tools for chalk, root, etc. Hartmetall-Zylinderfräser Carbide cylinder milling tool (cutting head) mit 6 Reihen Segmente 6 rows segments 48 70 86 21 45 00 010 (kleines Foto): 30 70 42 21 45 00 011 Hartmetall-Kegelfräser Carbide cone milling tool mit 4 Reihen Segmente 4 rows segments 20 75/20 57 21 45 00 031 Hartmetall-Kegelfräser Carbide cone milling tool mit 6 Reihen Segmente 6 rows segments 32 75/20 57 21 45 00 030 Hartmetall-Kegelfräser Carbide cone milling tool Körnung Granulate mit 4 Granulatstreifen 4 rows granulate 2,5 / 3 65/25 45 21 45 00 032 Hartmetall-Kegelfräser Carbide cone milling tool Körnung Granulate Granulat komplett granulate complete 2,5 / 3 65/25 45 21 45 00 033 7
KA-TE + PMO + Hächler Hartmetallwerkzeuge für Kalk, Wurzeln usw. Carbide coating tools for chalk, root, etc. Hartmetall-Halbkugelfräser Carbide semiglobe milling tool Körnung Granulate Granulat komplett granulate complete 2,5 / 3 85 48 21 45 00 050 2,5 / 3 63 34 21 45 00 051 Hartmetall-Radienfräser Carbide radius milling tool Körnung Granulate Granulat komplett granulate complete 2,5 / 3 100 30 21 45 00 070 Hartmetall-Pilzkopffräser Carbide mushroom shaped m.t. DN DN -mit Federung- -elastic (spring loaded)- 200 30 100 40 21 45 00 090 250 54 120 50 21 45 00 091 300 54 120 50 21 45 00 092 Hartmetall-Pilzkopf-Umfangfräser -mit Federung- Carbide mushroom shaped m.t. -elastic (spring loaded)- DN DN 200 36 110 40 21 45 00 095 250 63 130 50 21 45 00 096 300 72 130 50 21 45 00 097 Hartmetall-Pilzkopffräser Carbide mushroom shaped m.t. Körnung Granulate -mit Federung- -elastic (spring loaded)- 2,5 / 3 110 35 21 45 00 086 8
PMO -Mini- für Beton + Steinzeug Diamond coating tools for concrete + stone Diamant-Nutenfräser Diamond groove milling tool (cutting head) DN DN 150 3 30 40 21 49 80 016 Diamant-Einlauffräser Diamond inflow pipe milling tool (cutting head) DN DN 150 8 61 31 21 49 60 008 Diamant-Einlauffräser Diamond inflow pipe milling tool (cutting head) DN DN 200 12 65 31 21 49 60 009 Diamant-Pilzkopffräser Diamond mushroom shaped milling tool (cutting head) -mit Federung- -elastic (spring loaded)- DN DN 150 12 80 42 21 49 70 087 200 12 80 42 21 49 70 088 Diamant-Pilzkopf-Umfangfräser Diamond mushroom shaped milling tool (cutting head) -mit Federung- -elastic (spring loaded)- DN DN 150 18 98 42 21 49 70 010 200 18 98 42 21 49 70 011 9
PMO -Mini- Diamond coating PCD tools for plastic, PVC, GFK-liners Beste Diamant-Qualität, jedoch nicht geeignet für armierten Beton! Best diamond-quality for professional tasks (not for reinforced concrete)! Diamond cone milling tool 12 berechnete 45/15 35 21 49 40 016 Diamant-Zylinderfräser Diamond cylinder milling tool 16 berechnete 45 30 21 49 40 024 Diamant-Pilzkopffräser Diamond mushroom shaped m.t. Segmente Segments -mit Federung- -elastic (spring loaded)- 21 berechnete 80 30 21 49 40 042 - Linksschnitt, frontal - DN 200 - left-hand motion - 21 berechnete 80 30 21 49 40 043 - Rechtsschnitt - DN 200 - right-hand motion - Hartmetall-Zylinderfräser Carbide cylinder milling tool Hartmetallwerkzeug für Kalk, Wurzeln usw. Carbide coating tools for chalk, root, etc. mit 6 Reihen Segmente 6 rows segments 20 55 33 21 45 00 012 10
Sika - G 1 / " 2 Beste Diamant-Qualität, jedoch nicht geeignet für armierten Beton! Best diamond-quality for professional tasks (not suitable for reinforced concrete)! Diamond cone milling tool Diamond coating PCD tools for plastic, PVC, GFK-liners 16 berechnete 40/20 67 21 49 40 017 20 berechnete 40/20 67 21 49 40 088 (4 Segmente davon auf der Fräser-Unterseite) kleines Foto rechts zeigt: 20 berechnete 75/20 70 21 49 40 015 16 berechnete 55/15 58 21 49 40 046 Diamant-Zylinderfräser Diamond cylinder milling tool 18 berechnete 45 65 21 49 40 052 Diamant-Planfräser Diamond plan milling tool für Beton + Steinzeug Diamond coating tools for concrete + stone 4 (linkes Foto) 60 50 21 49 00 030 6 (rechtes Foto) 60 50 21 49 00 028 unteres Foto zeigt Diamant-Plan-Umfangfräser: 16 95 80 21 49 00 042 Diamant-Tellerfräser Diamond plate milling tool Segmente Segments Radius Radius 10 60 70 70 21 49 00 020 10 80 70 70 21 49 00 021 10 100 70 70 21 49 00 022 mit HM-Spitze Diamond cone milling tool -on top carbide- 9 45/55 80 21 49 00 023 auch ohne HM-Spitze erhältlich: 21 49 00 019 11
JS Roboter ( M12x1,50 ) Diamant-Kugelfräser Diamond globe milling tool (cutting head) Diamond coating PCD tools for plastic, PVC, GFK-liners Beste Diamant-Qualität, jedoch nicht geeignet für armierten Beton! Best diamond-quality for professional tasks (not for reinforced concrete)! 14 berechnete 30 29 21 49 40 171 Diamant-Kugelfräser Diamond globe milling tool (cutting head) für Beton + Steinzeug Diamond coating tools for concrete + stone 8 36 30 21 49 70 068 Hartmetall-Kugelfräser Carbide globe milling tool (cutting head) Körnung Granulate Hartmetallwerkzeuge für Kalk, Wurzeln usw. Carbide coating tools for chalk, root, etc. 2,5 / 3 34 30 21 45 00 102 Diamond cone milling tool (cutting head) für Beton + Steinzeug Diamond coating tools for concrete + stone M14 M14 4+4 40/20 50 21 49 00 054 weitere Fräser mit Gewindeanschluß M14 auf Katalog-Seiten 16/0, 16/1 und 16/3 12
IBG HC60 RS HC60 ( M14 bzw. M8) Diamond coating PCD tools for plastic, PVC, GFK-liners Diamant-Kugelfräser Diamond globe milling tool (cutting head) Beste Diamant-Qualität, jedoch nicht geeignet für armierten Beton! Best diamond-quality for professional tasks (not for reinforced concrete)! 14 berechnete 32 29 21 49 40 057 M14 Diamant-Formt e ile 21 49 40 118 M8 Diamond cone milling tool (cutting head) 10 berechnete 30/10 29 21 49 40 063 M14 26 21 49 40 119 M8 Diamant-Zylinderfräser Diamond cylinder milling tool (cutting head) 12 berechnete 30 22 21 49 40 097 M14 Diamant-Form teile 21 49 40 120 M8 Diamant-Kugelfräser für z.b. Entfernung von Folienresten Diamond globe milling tool (cutting head) bzw. feine Nachbearbeitung im Liner Oberfläche Gew. Surface Thread Diamant-Körnung 31 28 21 49 70 065 M14 Diamant-Körnung 31 28 21 49 70 066 M8 Diamant-Körnung 31 35 21 49 70 067 3/8"UNF Diamant-Kugelfräser Diamond globe milling tool (cutting head) für Beton + Steinzeug Diamond coating tools for concrete + stone 8 36 30 21 49 70 058 M14 21 49 70 064 M8 15
Gewinde: M14 ProKasro - IBG - I.S.T. - JT Schwalm - HF130 für Beton + Steinzeug Diamond coating tools for concrete + stone Diamant-Tellerfräser Diamond plate milling tool (cutting head) Radius Radius 60 50 23 21 49 60 034 60 / 80 / 100 70 34 21 49 60 012-...014 großes Foto mit 10 Diamant-Segmenten 60 / 80 / 100 70 34 21 49 60 016-...018 kleines Foto mit 15 Diamant-Segmenten Diamond cone milling tool (cutting head) Segmente Segments 9 55/45 40 21 49 00 069 9 48/40 24 21 49 00 067 (kleines Foto): der große Kegel-Fräser ist auch mit HM-Wechselspitze erhältlich: 9 55/45 50 21 49 00 068 Diamant-Fingerfräser Diamond finger milling tool Segmente Segments 5 (linkes Foto) 25 75 21 49 00 066 1 (rechtes Foto) 12 ** 90 ** 21 49 00 064 ** andere Ø und Höhen sind auf Anfrage möglich Diamant-Kugelfräser Diamond globe milling tool (cutting head) 16 (großes Foto) 60 64 21 49 70 056 21 (ähnl. großem Foto) 46 47 21 49 70 054 8 (kleines Foto) 36 30 21 49 70 058 - besonders gut geeignet für Beton mit Armierung - Diamant-Einlauffräser Diamond inflow pipe milling tool (cutting head) Segmente DN Segments DN 12 250 95 43 21 49 70 015 Pos. 1 hat Diamant-Großsegmente mit Oberflächenradius (großes Foto) 12 250 85 33 21 49 60 040 8 200 75 30 21 49 60 041 8 100 53 30 21 49 60 042 Pos. 2-4 haben etwas kleinere Diamantsegmente mit Oberflächenradius (kleines Foto) 16/0
Gewinde: M14 ProKasro - IBG - I.S.T. - JT Schwalm - HF130 Diamond coating PCD tools for plastic, PVC, GFK-liners Beste Diamant-Qualität, jedoch nicht geeignet für armierten Beton! Best diamond-quality for professional tasks (not for reinforced concrete)! Diamond cone milling tool (cutting head) 16 berechnete 40/20 47 21 49 40 014 10 berechnete 30/10 33 21 49 40 063 (kleines Foto) Diamant-Kegel-Zylinderfräser Diamond cone-cylinder milling tool (cutting head) 24 berechnete 50 55 21 49 40 083 (dieser Fräser ist zusätzlich mit einer Hartmetallspitze bestückt) 22 berechnete 42 33 21 49 40 077 (siehe kleines Foto) Diamant-Tellerfräser Diamond plate milling tool (cutting head) Segmente Segments 24 berechnete 63 20 berechnete 50 27 20 21 49 40 044 21 49 40 096 Diamant-Zylinderfräser Diamond cylinder milling tool (cutting head) Segmente Segments 18 berechnete 45 12 berechnete 30 30 32 21 49 40 025 21 49 40 097 Diamant-Kugelfräser Diamond globe milling tool (cutting head) 14 berechnete 42 45 21 49 40 039 (großes Foto) 14 berechnete 32 29 21 49 40 057 28 berechnete 42 45 21 49 40 032 (kleines Foto) (ähnlich wie großes Foto, jedoch ohne Schlüsselaufnahme) 16/1
Gewinde: M14 Schwalm - IBG - I.S.T. - JT ProKasro - HF130 für Kunststoffe, PVC, Liner Diamond Coating PCD tools for plastic, PVC, liner Diamant-Qualität für professionelle universelle Aufgaben (nicht geeignet für armierten Beton!) Diamant-Kugelfräser Diamond globe milling tool (cutting head) asymmetrische 50 54 21 49 40 501 Diamantstücke Diamant-Kugelfräser Diamond globe milling tool (cutting head) asymmetrische 70 79 21 49 40 502 Diamantstücke Diamant-Kegel-Zylinderfräser mit Hartmetall-Spitze Diamond cone-cylinder milling tool asymmetrische 50 55 21 49 40 583 Diamantstücke Diamant-Kegel-Zylinderfräser mit Hartmetall-Spitze Diamond cone-cylinder milling tool asymmetrische 70 64 21 49 40 503 Diamantstücke 16/2
Gewinde: M14 bzw. M10 z.b. ProKasro - IBG - I.S.T. - JT - Schwalm - HF130 Diamond coating PCD tools for plastic, PVC, GFK-liners Beste Diamant-Qualität, jedoch nicht geeignet für armierten Beton! Best diamond-quality for professional tasks (not for reinforced concrete)! Diamond cone milling tool (cutting head) Gewinde Thread 22 berechnete 28/15 46 21 49 40 101 M14 (dieser Fräser ist mit einer Diamantspitze bestückt) 14 berechnete 28/15 36 21 49 40 102 M10x0,75 (dieser Fräser ist mit einer Diamantspitze bestückt) Diamant-Fingerfräser Diamond finger milling tool (cutting head) Segmente Segments 9 berechnete 13 9 berechnete 13 60 45 21 49 40 099 21 49 40 100 Gewinde Thread M14 M10x0,75 Diamant-Tellerfräser Diamond plate milling tool (cutting head) Segmente Segments 20 berechnete 50 12 berechnete 35 20 20 21 49 40 096 21 49 40 098 Gewinde Thread M14 M10x0,75 Diamant-Zylinderfräser Diamond cylinder milling tool (cutting head) Gewinde Thread 12 berechnete 30 32 21 49 40 097 M14 12 berechnete 30 22 21 49 40 109 M10x0,75 Diamant-Kugelfräser Diamond globe milling tool (cutting head) Segmente Segments Gewinde Thread 14 berechnete 32 29 21 49 40 057 M14 14 berechnete 32 35 21 49 40 035 M10x0,75 Diamant-Kugeln sind auch mit Diamant-Einstechspitze erhältlich (s. kleines Foto): 16 berechnete 40 50 21 49 40 113 M14 16 berechnete 32 32 21 49 40 114 M14 Diamant-Kugeln mit Diamant-Einstechspitze gibt es auch für andere Gewindeaufnahmen!! 16/3
Gewinde: M10x0,75 ProKasro -light- für Beton + Steinzeug Diamond coating tools for concrete + stone Diamant-Tellerfräser Diamond plate milling tool (cutting head) ProKasro -light- M10x0,75 Radius Radius 40 44 24 21 49 60 036 10 Diamant-Segmente Diamond cone milling tool (cutting head) ProKasro -light- M10x0,75 5 30/20 20 21 49 60 037 Beste Diamant-Qualität, jedoch nicht geeignet für armierten Beton! Best diamond-quality for professional tasks (not for reinforced concrete)! Diamant-Kugelfräser Diamond globe milling tool (cutting head) 14 berechnete 32 35 21 49 40 035 Diamond cone milling tool (cutting head) 10 berechnete 30/10 26 21 49 40 026 Diamond coating PCD tools for plastic, PVC, GFK-liners ProKasro -light- M10x0,75 ProKasro -light- M10x0,75 Diamant-Zylinderfräser Diamond cylinder milling tool (cutting head) 12 berechnete 30 22 21 49 40 109 ProKasro -light- M10x0,75 Diamant-Tellerfräser Diamond plate milling tool ProKasro -light- M10x0,75 12 berechnete 35 20 21 49 40 098 16/4
KRE, KANGAROO, Lateral Tap Cutter, etc. Aufnahmestift 1/4" (6,35mm) - pin shaft 1/4" - Beste Diamant-Qualität, jedoch nicht geeignet für armierten Beton! Best diamond-quality for professional tasks (not for reinforced concrete)! Diamant-Spezialfräser Diamond special milling tools (cutting heads) Diamond coating PCD tools for plastic, PVC, GFK-liners mit Aufnahmestift 1/4" (6,35mm) pin shaft 1/4" (6,35mm) 10 30/10 26 21 49 40 067 oberes Foto: - Diamond cone milling tool (upper photo) 14 30 30 21 49 40 066 unteres Foto: - Diamant-Kugelfräser Diamond globe milling tool (lower photo) Diamond cone milling tool mit Aufnahmestift 1/4" (6,35mm) pin shaft 1/4" (6,35mm) 6 9/15 55 21 49 40 105 Diamond cone milling tool 2 17/22 60 21 49 00 085 für Beton + Steinzeug Diamond coating tools for concrete + stone mit Aufnahmestift 1/4" (6,35mm) pin shaft 1/4" (6,35mm) Hartmetall-Fräser Carbide milling tools (cutting heads) Körnung Granulate Hartmetallwerkzeug für Kalk, Wurzeln usw. Carbide coating tool for chalk, root, etc. mit Aufnahmestift 1/4" (6,35mm) pin shaft 1/4" (6,35mm) 2,5 / 3 32 32 21 45 00 045 (Foto links: Hartmetall-Kugelfräser -Carbide globe left side photo-) 2,5 / 3 30/10 24 21 45 00 046 (Foto rechts: Hartmetall-Kegelfräser -Carbide cone right side photo-) Bürsten und TS Brushes and Diamond disc Zubehör für Roboter Equipment for robots mit Aufnahmestift 1/4" (6,35mm) pin shaft 1/4" (6,35mm) Pos. Artikel pos. Article Code-Nr. links 25 80 Pinselbürste 21 50 00 220 left Tight corner end brush Mitte 75 36 Scheibenbürste 21 50 00 221 middle Wire wheel brush rechts 50 63 Topfbürste 21 50 00 222 right Wire cup brush unteres linkes Foto: 50 6,0 Diamant-Trennscheiben-Set 21 49 60 134 lower left photo: borehole Diamond-Disc-Set for liners and plastic unteres rechtes Foto: 24 45 Adapter 1/4"xM14 21 50 00 029 lower right photo: Adaptor : pin shaft 1/4" x M14 17/0
sonstige Fräswerkzeuge Other Cutting Heads Beste Diamant-Qualität, jedoch nicht geeignet für armierten Beton! Best diamond-quality for professional tasks (not for reinforced concrete)! Diamant-Einlauffräser mit Spannuten Diamond inflow pipe milling tool (cutting head) 33 70 40 21 49 40 073 Diamond coating PCD tools for plastic, PVC, GFK-liners KA-TE/PMO/Hächler mit Spannuten Diamond cone milling tool (cutting head) KA-TE/PMO/Hächler 24 70/18 52 21 49 40 072 Diamant-Konusfräser Diamond cone milling tool (cutting head) COSMIC Segmente Segments 20 55/17 45 21 49 40 117 36 73/20 65 21 49 40 078 Diamant-Kugelfräser Diamond globe milling tool (cutting head) M14 44 60 70 21 49 40 056 Diamant-Kugelfräser mit Spannuten Diamond globe milling tool (cutting head) 3/8"UNF z.b. Hächler Climb Segmente Segments 18 40 41 21 49 40 068 20 50 44 21 49 40 168 36 50 44 21 49 40 167 Diamant-Pilzfräser Diamond mushroom shaped milling tool für Beton + Steinzeug Diamond coating tools for concrete + stone 20 115 45 21 49 00 072 Diamond cone milling tool BJR Beaver 11 80 55 21 49 00 070 100318 17/1
3 / "UNF 8 RS-Cutter Dancutter - DC70 I.S.T. - EC-Micro-Cutter Hächler HF Climb 80 Diamant-Kugelfräser Diamond globe milling tool (cutting head) Diamantwerkzeug für Beton + Steinzeug 21 46 47 21 49 70 055 8 36 37 21 49 70 062 - gut geeignet für armierten Beton - - specially suitable for reinforced concrete - Diamant-Halbkugelfräser Diamond halfglobe milling tool (cutting head) Diamantwerkzeug für Beton + Steinzeug 6 36 17 21 49 70 049 10 65 30 21 49 60 044 Diamant-Tellerfräser Diamond plate milling tool (cutting head) Diamantwerkzeug für Beton + Steinzeug Radius Radius 40 44 22 21 49 60 039 10 Diamant-Segmente Hartmetall-Kugelfräser Carbide globe milling tool (cutting head) Körnung Granulate Hartmetallwerkzeug für Kalk, Wurzeln usw. 2,5 / 3 30 33 21 45 00 066 2,5 / 3 40 43 21 45 00 060 Hartmetall-Kegelfräser Carbide cone milling tool (cutting head) Körnung Granulate Hartmetallwerkzeug für Kalk, Wurzeln usw. 2,5 / 3 25/10 50 21 45 00 067 18/1
3 / "UNF 8 RS-Cutter Dancutter - DC70 I.S.T. - EC-Micro-Cutter Hächler HF Climb 80 Diamond coating PCD tools for plastic, PVC, GFK-liners Beste Diamant-Qualität, jedoch nicht geeignet für armierten Beton! Best diamond-quality for professional tasks (not for reinforced concrete)! Diamond cone milling tool (cutting head) 12 berechnete 45/7 38 21 49 40 020 (großes Foto) 10 berechnete 30/10 26 21 49 40 112 (kleines Foto) Diamant-Tellerfräser Diamond plate milling tool 12 berechnete 35 20 21 49 40 110 Diamant-Zylinderfräser Diamond cylinder milling tool 12 berechnete 30 22 21 49 40 111 Diamant-Kegel-Zylinderfräser Diamond cone-cylinder milling tool (cutting head) 16 berechnete 37 42 21 49 40 081 (flach) Diamant-Kugelfräser Diamond globe milling tool 14 berechnete 42 45 21 49 40 022 (s. großes Foto) 14 berechnete 32 35 21 49 40 047 (s. großes Foto) 28 berechnete 42 45 21 49 40 032 (s. kleines Foto) 18/2
3 / "UNF 8 RS-Cutter Dancutter - DC70 I.S.T. - EC-Micro-Cutter Hächler HF Climb 80 Diamond coating PCD tools for plastic, PVC, GFK-liners Beste Diamant-Qualität, jedoch nicht geeignet für armierten Beton! Best diamond-quality for professional tasks (not suitable for reinforced concrete)! Diamant-Kugelfräser mit 4 Spannuten Diamond globe milling tool Segmente Segments 14 berechnete 30 18 berechnete 40 30 41 21 49 40 191 21 49 40 068 Diamant-Kugelfräser mit 4 Spannuten Diamond globe milling tool 20 berechnete 50 44 21 49 40 168 Diamant-Kugelfräser mit 8 Spannuten Diamond globe milling tool 36 berechnete 50 44 21 49 40 167 Diamant-Fingerfräser Diamond finger milling tool (cutting head) Segmente Segments 9 berechnete 13 9 berechnete 13 60 45 21 49 40 123 21 49 40 124 18/3
Gewinde: 5 / 8 " UNC für Beton + Steinzeug IMS - BJR - SubTech - KRE Diamond coating tools for concrete + stone Diamant-Halbkugelfräser Diamond halfglobe milling tool (cutting head) 10 65 30 21 49 60 029 Diamond cone m.t. (cutting head) 9 55/45 40 21 49 00 068 Diamant-Einlauffräser Diamond inflow pipe m.t. (cutting head) Segmente DN Segments DN 12 250 85 33 21 49 60 060 8 200 75 30 21 49 60 061 8 100 53 30 21 49 60 062 Diamant-Pilzkopffräser Diamond mushroom shaped m.t. (cutting head) DN Segmente DN Segments mit Federung -elastic (spring loaded)- 200 12 80 38 21 49 70 078 200 18 98 38 21 49 70 027 300 12 120 50 21 49 70 021 300 18 135 50 21 49 70 031 Diamant-Kugelfräser - gut geeignet für armierten Beton - Diamond globe m.t. -spherical- (cutting head) - specially suitable for reinforced concrete - 16 60 64 21 49 70 051 (kleines Foto): 21 46 47 21 49 70 059 120117 19/0
Gewinde: 5 / 8 " UNC IMS - BJR - SubTech - KRE Diamond coating PCD tools for plastic, PVC, GFK-liners Diamant-Kegel-Zylinderfräser Diamond cone-cylinder milling tool (cutting head) 24 berechnete 50 55 21 49 40 084 (dieser Fräser ist zusätzlich mit einer Hartmetallspitze bestückt) 16 berechnete 37 42 21 49 40 089 (siehe kleines Foto) Beste Diamant-Qualität, jedoch nicht geeignet für armierten Beton! Best diamond-quality for professional tasks (not for reinforced concrete)! Diamant-Tellerfräser Diamond plate milling tool (cutting head) 24 berechnete 63 27 21 49 40 065 Diamant-Zylinderfräser Diamond cylinder milling tool (cutting head) 18 berechnete 45 30 21 49 40 018 Diamond cone milling tool (cutting head) 16 berechnete 40/20 47 21 49 40 051 Diamant-Kugelfräser Diamond globe milling tool (cutting head) 14 berechnete 42 45 21 49 40 037 (großes Foto) 28 berechnete 42 45 21 49 40 032 (kleines Foto) 120117 19/1
IMS Fräsroboter Micro-Fräse (M8x1,25) Diamant-Fräser Diamond milling tools (cutting head) 14 berechnete 32 37 21 49 40 049 (Foto links: Diamant-Kugelfräser Diamond coating PCD tools for plastic, PVC, GFK-liners Beste Diamant-Qualität, jedoch nicht geeignet für armierten Beton! Best diamond-quality for professional tasks (not for reinforced concrete)! -Diamond globe- left side) 14 berechnete 36 41 21 49 40 095 (Foto links: Diamant-Kugelfräser -Diamond globe- left side) 10 berechnete 30/10 35 21 49 40 027 (Foto rechts: -Diamond cone- right side) Diamant-Fräser mit verlängertem Schaft Diamond milling tools (cutting heads) with shaft 14 berechnete 30 50 21 49 40 090 (Foto links: Diamant-Kugelfräser -Diamond globe- left side) 10 berechnete 30/10 50 21 49 40 104 (Foto rechts: -Diamond cone- right side) Diamant-Zylinderfräser Diamond cylinder milling tool (cutting head) 12 berechnete 30 32 21 49 40 115 Diamant-Kugelfräser für z.b. Entfernung von Folienresten Diamond globe milling tool (cutting head) bzw. feine Nachbearbeitung im Liner Oberfläche Surface Diamant-Körnung 37 42 21 49 70 063 Hartmetall-Kugelfräser Carbide globe milling tool (cutting head) Körnung Granulate 2,5 / 3 34 37 21 45 00 057 (Foto links: ohne Schaft -no shaft left side-) 2,5 / 3 31 55 21 45 00 101 (Foto rechts: mit Schaft -with shaft right side-) Hartmetallwerkzeug für Kalk, Wurzeln usw. Carbide coating tool for chalk, root, etc. Diamant-Kugelfräser Diamond globe milling tool (cutting head) 8 36 38 21 49 70 057 (Foto links: ohne Schaft -no shaft left side-) 8 34 58 21 49 70 047 (Foto rechts: mit Schaft -with shaft right side-) für Beton + Steinzeug Diamond coating tools for concrete + stone 19/2
Adapter Adaptor einige Beispiele: some examples: Roboteraufnahme --> Werkzeugaufnahme Robot-thread --> toolshaft Roboter --> Werkzeug Robot --> Tool Teile-Nr. Part-No. M14 --> KA-TE 55 49 K 96 21 50 00 009 KA-TE --> M14 55 35 K 99 21 50 00 010 M14 --> PMO -Mini- 45 45 K 97 21 50 00 005 KA-TE --> PMO -Mini- 55 23 K 105 21 50 00 003 PMO -Mini- --> KA-TE 55 27 K 104 21 50 00 002 5/8"UNC --> M14 24 53 K 115 21 50 00 016 Sika G 1 / 2 " --> KA-TE 55 20 K 82 21 50 00 001 KA-TE --> Sika G 1 / 2 " 55 30 K 84 21 50 00 007 weitere Adapter auf Anfrage erhältlich (further adaptors on request available) 21
Zubehör 1 Equipment 1 Schaftverlängerungen für diverse Robotersysteme Extensions for tools of different robot systems Teile-Nr. System Part-No. System 55 55 50 25 K 36 K 108 KA-TE KA-TE 21 50 01 015 21 50 01 016 55 15 K 9 KA-TE 21 50 01 014 45 50 K 102 PMO(Mini) 21 50 01 017 45 25 K 103 PMO(Mini) 21 50 01 018 30 40 K 78 Sika 21 50 01 020 24 33 K 79 5/8"UNC 21 50 01 019 22 33 K 101 M14 21 50 01 021 22 50 K 156 M14 21 50 01 026 26 100 K 140 I.S.T. 21 50 01 022 26 150 K 141 I.S.T. 21 50 01 023 16 15 K 154 3/8"UNF 21 50 01 024 16 30 K 158 3/8"UNF 21 50 01 027 18,6 22 K 155 M8x1,25 21 50 01 025 Bürsten Brushes Gew. Bezeichnung Thread Description 70 80 35 65 22,2 22,2 Zopf-Topf-Bürste Zopf-Topf-Bürste 21 50 00 201 21 50 00 200 65 45 M14 Zopf-Topf-Bürste 21 50 00 205 80 75 M14 Zopf-Topf-Bürste 21 50 00 208 100 30 M14 Kegelscheiben-B. 21 50 00 203 100 11 M14 Scheibenbürste 21 50 00 206 65 47 5/8" Zopf-Topf-Bürste 21 50 00 211 80 75 5/8" Zopf-Topf-Bürste 21 50 00 210 75 11 13,0 Scheibenbürste 21 50 00 204 f.e. complete-set Ø 50 Diamant-Trennscheibe für Kunststoff, Liner, GFK usw. Diamond disc for plastic, Liner, CIPP, PVC, GFK, etc. Bohrung Bezeichnung Borehole Description 50 6,0 Trennscheibe disc 21 28 27 112 24 M14, 5/8", 3/8" Aufnahme borehole-basis 21 50 00 039 z.b. Komplett-Set Ø 50: f.e. complete-set Ø 50: 21 49 60 033 z.b. Komplett-Set Ø 115: f.e. complete-set Ø 115: 21 49 60 133 nur die Einzel-Trennscheibe: single disc: 30 6,0 Trennscheibe disc 21 28 27 104 50 6,0 Trennscheibe disc 21 28 27 112 75 6,0 Trennscheibe disc 21 28 27 113 115 22,2 Trennscheibe disc 21 28 27 110 125 22,2 Trennscheibe disc 21 28 27 111 180 22,2 Trennscheibe disc 21 28 27 115 230 22,2 Trennscheibe disc 21 28 27 114 Korund-Schleiftopf für Eisen- + Stahlbearbeitung Corund grindstone for cutting steel Bohrung Borehole 80 22,2 27 21 50 00 102 90/110 22,2 55 21 50 00 101 Komplett-Set Ø 80 mit Gewindeeinsatz: complete set with thread: 22,2 auf M14, 5/8", 3/8" 21 50 00 10... Komplett-Set Ø 90/110 mit Gewindeeinsatz: complete set with thread: 22,2 auf M14, 5/8", usw. 21 50 00 10... Multifunktionsschlüssel für Set 21 50 00 111 25