National Lab Inventory Systems for Freezers and Refrigerators 2006 * Cryo Boxes * Storage Boxes * Vertical and Horizontal Racks Reg.-Nr. KAT-DEC-ORD-GB-130106 Alle Rechte und Änderungen vorbehalten. 2006 Copyright by National Lab Version: 130106 All rights and changes reserved. Printed in Germany.
9x9 Divider holds 81 vials up to 12.5 mm dia. EPPi 50 and EPPi 45 The internal height for the EPPi 50 is 50 mm. The internal height for the EPPi 45 with lid varies between 42 and 47 mm. With and without alphanumeric coding. For alternatives to Safe-Lock 1.5-ml and 2.0-ml reaction vessels please refer to the 8x8 box in our catalogue. encoded encoded encoded encoded encoded encoded encoded encoded EPPi 50 / 9x9 EPPi 45 / 9x9 natural KEC50-C81NA KEC45-V81NA NEON yellow KEC50-C81NY KEC45-V81NY NEON blue KEC50-C81NB KEC45-V81NB NEON green KEC50-C81NG KEC45-V81NG NEON red/pink KEC50-C81NP KEC45-V81NP NEON orange KEC50-C81NO KEC45-V81NO white KEC50-C81WH KEC45-V81WH yellow KEC50-C81YE KEC45-V81YE blue KEC50-C81BU KEC45-V81BU green KEC50-C81GR KEC45-V81GR red KEC50-C81RE KEC45-V81RE violet KEC50-C81VT KEC45-V81VT black KEC50-C81BL KEC45-V81BL black- KEC50-C81BB KEC45-V81BB special Black-special for light-sensitive samples. Alphanumeric coding facilitates sample identification. Transparent and neon boxes with additional coding on the bottom of the container. 1A B C D E F G H I 1 2 3 4 5 6 7 8 9 2 3 4 5 6 7 8 9 A B C D E F G H I not encoded not encoded not encoded not encoded not encoded not encoded Matching racks and drawers can be found in our catalogue. EPPi 50 / 9x9 EPPi 45 / 9x9 natural KE50-C81NA KE45-V81NA NEON yellow KE50-C81NY KE45-V81NY NEON blue KE50-C81NB KE45-V81NB NEON green KE50-C81NG KE45-V81NG NEON red/pink KE50-C81NP KE45-V81NP NEON orange KE50-C81NO KE45-V81NO white KE50-C81WH KE45-V81WH yellow KE50-C81YE KE45-V81YE blue KE50-C81BU KE45-V81BU green KE50-C81GR KE45-V81GR red KE50-C81RE KE45-V81RE violet KE50-C81VT KE45-V81VT black KE50-C81BL KE45-V81BL black- KE50-C81BB KE45-V81BB special Black-special for light-sensitive samples. At last the right cryo tubes! Tightly closing screw tops with safesealing lip. No risk of contamination from silicone because neither silicone nor polyethylene are used at all. Cadmium free. Certified free of endotoxins (pyrogens) as well as RNase/DNase. Prices per pack. Free-standing with 1.2 ml 2.0 ml star-base foot. Writing area and graduations included. Beta sterilized. Cat.No. 01-1000P Cat.No. 01-2000P Pack 10x100 pcs. Free-standing with starbase foot. Non-sterile. Cat.No. 01-1100 Cat.No. 01-2100 Pack 1x1000 pcs. 4.0 ml and 5.0 ml cryo tubes can be found in our catalogue. Colour-coding for cryo tubes Pack with 5x100 pcs. Prices per Pack. Colour Colour white CAP/02 violet CAP/10 yellow CAP/05 grey CAP/07 blue CAP/06 orange CAP/09 green CAP/04 pink CAP/03 red CAP/13 Reg. No. EPPi-PCR-FLY-GB-120505 All rights and changes reserved. 2005 Copyright by National Lab Printed in Germany.
Cryogenic Line NEW! Cryo tubes and PCR reaction vessels At last the right cryo tubes! Safety screw cap and tube made entirely out of high-quality polypropylene without any chemical plasticizers. No risk of contamination due to silicone because neither silicone nor polyethylene are used at all. Tightly closing screw caps with safe-sealing lip. Cadmium free. Certified free of endotoxins (pyrogens) as well as RNase/DNase. The screw tops can be colour-coded to ease sample identification. Safe-sealing lip ensures a secure and tight seal. 1.2 ml 2.0 ml 4.0 ml 5.0 ml Free-standing with star-base foot. Writing area and Pack 10x100 pcs. Pack 10x100 pcs. Pack 5x100 pcs. Pack 5x100 pcs. graduations included. 01-1000P 01-2000P 01-4000P 01-5000P Beta sterilized. Free-standing with star-base Pack 1x1000 pcs. Pack 1x1000 pcs. Pack 1x1000 pcs. Pack 1x1000 pcs. foot. Non-sterile. 01-1100 01-2100 01-4100 01-5100 Colour-coding for cryo tubes The coloured cap inserts make it easier to find and retrieve samples. 9 different colours available. Can be easily pressed into the top of the cap. Very easy to change. Suitable for writing on. Colour Colour Pack with 5x100 pcs. white CAP/02 violet CAP/10 yellow CAP/05 grey CAP/07 blue CAP/06 orange CAP/09 green CAP/04 pink CAP/03 red CAP/13 Cryo tube rack Non-slip rack with locking system for the star-base foot prevents the tubes from rotating when tightening and unscrewing the caps. Single-handed operation to make work fast and comfortable. Holds 4 x 10 cryo tubes. Alphanumeric coding. Colour blue. Ext. dimensions BxF-BxH=200x100x25 mm. WS40-B Pack of 1 pc. WS40-BP12 Pack of 12 pcs. At last the right PCR reaction vessels! PCR reaction vessels made of high-quality propylene with no chemical plasticizers. Individual or as strip of 8, each reaction vessel has its own attached cap, making it easy to open and close the tubes with one hand. Fitted with convex cap. Colourless. Free of endotoxins (pyrogens) and R/DNase. Autoclavable. Non-sterile. Other models can also be supplied for bulk orders; ready sterilized also available. 0.2 ml strips of 8 0.2 ml single Pack of 120 strips of 8 in bag. Pack of 1000 pcs. in bag. 04-9100 04-8100 Reg. No. EPPi-PCR-FLY-GB-290305 All rights and changes reserved. 2005 Copyright by National Lab Printed in Germany.
Tieftemperatur-Polypropylen Ultra-Low temperature Polypropylen Farbcodiert Colour coded Durchsichtiger Deckel Clear lid Superfrost bis -196 C Ultra-Freezable down to -196 C Autoklavierbar bei +121 C Autoclavable at +121 C Unschlagbare Preise unbeatable prices Andere Größen auf Anfrage Other sizes on request Sonderfarben möglich Special colours available Riesiges Angebot an Gestellen und Einschüben für alle Kühl- und Tiefkühlgeräte Enormous range of rack systems for all types of refrigerators and freezers EPPi Cryo Boxes 130x130 EPPi 45 EPPi 50 50 mm 45 mm variabel 53 mm EPPi 45 / 9x9 EPPi 50 / 9x9 Variabel variable 45-50 mm Innenhöhe inner height 50 mm 9x9 Fächer für 81 Röhrchen bis 12,5 mm Ø 9x9 Divider holds 81 vials up to 12.5 mm dia. transparent natural KE45-V81NA KE50-C81NA NEON - gelb NEON NEON yellow KE45-V81NY KE50-C81NY NEON - blau NEON NEON blue KE45-V81NB KE50-C81NB NEON - grün NEON NEON green KE45-V81NG KE50-C81NG NEON - rot/pink NEON NEON red/pink KE45-V81NP KE50-C81NP NEON - orange NEON NEON orange KE45-V81NO KE50-C81NO weiß white KE45-V81WH KE50-C81WH gelb yellow KE45-V81YE KE50-C81YE blau blue KE45-V81BU KE50-C81BU grün green KE45-V81GR KE50-C81GR rot red KE45-V81RE KE50-C81RE violett violet KE45-V81VT KE50-C81VT schwarz black KE45-V81BL KE50-C81BL schwarz- black- KE45-V81BB KE50-C81BB National Lab National Lab GmbH Bereich Laborprodukte Grambeker Weg 157 D-23879 Mölln Tel: +49 4542/8491-70 Fax: +49 4542/8491-71 e-mail: LabSales@NationalLab.com Gestelle / Einschübe Seite 4-5, 22 Racks on page 4-5, 22. Internet Reg. Nr. KAT-EPPi-G-GB-100106 2006 Copyright by National Lab, Mölln, Germany Alle Rechte und Änderungen vorbehalten. All rights and changes reserved. Printed in Germany 9A.1
8x8 Locheinsatz für 64 Reaktionsgefäße 1,5 ml und 2,0 ml Safe-Lock. 8x8 Holes insert for 64 Reaction Vessels 1.5 ml and 2.0 ml Safe-Lock. EPPi 45 / O8x8 EPPi 50 / O8x8 Variabel variable 45-50 mm Innenhöhe inner height 50 mm transparent natural KE45-VO64NA KE50-CO64NA NEON - gelb NEON NEON yellow KE45-VO64NY KE50-CO64NY NEON - blau NEON NEON blue KE45-VO64NB KE50-CO64NB NEON - grün NEON NEON green KE45-VO64NG KE50-CO64NG NEON - rot/pink NEON NEON red/pink KE45-VO64NP KE50-CO64NP NEON - orange NEON NEON orange KE45-VO64NO KE50-CO64NO weiß white KE45-VO64WH KE50-CO64WH gelb yellow KE45-VO64YE KE50-CO64YE blau blue KE45-VO64BU KE50-CO64BU grün green KE45-VO64GR KE50-CO64GR rot red KE45-VO64RE KE50-CO64RE violett violet KE45-VO64VT KE50-CO64VT schwarz black KE45-VO64BL KE50-CO64BL schwarz- black- KE45-VO64BB KE50-CO64BB Gestelle / Einschübe Seite 4-5, 22 Racks on page 4-5, 22. EPPi 45 EPPi 50 50 mm 45 mm variabel 53 mm 7x7 Fächer für 49 Röhrchen bis 16,5 mm Ø 7x7 Divider holds 49 vials up to 16.5 mm dia. EPPi 45 / 7x7 EPPi 50 / 7x7 Variabel variable 45-50 mm Innenhöhe inner height 50 mm transparent natural KE45-V49NA KE50-C49NA NEON - gelb NEON NEON yellow KE45-V49NY KE50-C49NY NEON - blau NEON NEON blue KE45-V49NB KE50-C49NB NEON - grün NEON NEON green KE45-V49NG KE50-C49NG NEON - rot/pink NEON NEON red/pink KE45-V49NP KE50-C49NP NEON - orange NEON NEON orange KE45-V49NO KE50-C49NO weiß white KE45-V49WH KE50-C49WH gelb yellow KE45-V49YE KE50-C49YE blau blue KE45-V49BU KE50-C49BU grün green KE45-V49GR KE50-C49GR rot red KE45-V49RE KE50-C49RE violett violet KE45-V49VT KE50-C49VT schwarz black KE45-V49BL KE50-C49BL schwarz- black- KE45-V49BB KE50-C49BB Gestelle / Einschübe Seite 4-5, 22 Racks on page 4-5, 22. Reg.No. KAT-EPPi-G-GB-100106. All rights and changes reserved. Printed in Germany. 9A.2
EPPi 45 EPPi 50 50 mm 45 mm variabel 53 mm Rastereinsätze siehe unten See Grid Dividers below Ohne Fächereinteilung. Geeignet für EPPi Rastereinsätze. Without Divider. Useful for EPPi Grid Dividers. EPPi 45 / 1x1 EPPi 50 / 1x1 Variabel variable 45-50 mm Innenhöhe inner height 50 mm transparent natural KE45-V1NA KE50-C1NA NEON - gelb NEON NEON yellow KE45-V1NY KE50-C1NY NEON - blau NEON NEON blue KE45-V1NB KE50-C1NB NEON - grün NEON NEON green KE45-V1NG KE50-C1NG NEON - rot/pink NEON NEON red/pink KE45-V1NP KE50-C1NP NEON - orange NEON NEON orange KE45-V1NO KE50-C1NO weiß white KE45-V1WH KE50-C1WH gelb yellow KE45-V1YE KE50-C1YE blau blue KE45-V1BU KE50-C1BU grün green KE45-V1GR KE50-C1GR rot red KE45-V1RE KE50-C1RE violett violet KE45-V1VT KE50-C1VT schwarz black KE45-V1BL KE50-C1BL schwarz- black- KE45-V1BB KE50-C1BB Gestelle / Einschübe Seite 4-5, 22 Racks on page 4-5, 22. EPPi Rastereinsätze EPPi Grid Dividers K = Aus Polypropylen (PP) K = Made of Polypropylen (PP) N = Aus Kartonmaterial N = Made of fiberboard H = 25 mm H = 30 mm H = 40 mm H = 65 mm Fächer Röhrchen-ø bis Grid Vials up to diam. 14x14 ca. 7,0 mm RE0251414N RE0301414N RE0401414N RE0651414N 13x13 ca. 8,0 mm RE0251313N RE0301313N RE0401313N RE0651313N 12x12 ca. 9,0 mm RE0251212N RE0301212N RE0401212N RE0651212N 10x10 ca. 12,0 mm RE0251010N RE0301010K RE0401010N RE0651010N 9x9 ca. 13,0 mm RE0250909N RE0300909K RE0400909N RE0650909N 8x8 ca. 14,0 mm RE0250808N RE0300808K RE0400808N RE0650808N 7x7 ca. 16,5 mm RE0250707N RE0300707N RE0400707N RE0650707N 6x6 ca. 19,0 mm RE0250606N RE0300606N RE0400606N RE0650606N 5x5 ca. 23,0 mm RE0250505N RE0300505K RE0400505N RE0650505N 4x4 ca. 30,0 mm RE0250404N RE0300404K RE0400404N RE0650404N 3x3 ca. 40,0 mm RE0250303N RE0300303N RE0400303N RE0650303N Andere Größen auf Anfrage. Other sizes on request. Reg.No. KAT-EPPi-G-GB-100106 All rights and changes reserved. Printed in Germany. 9A.3
138 mm H 138 mm Edelstahl -Truhengestelle für Stainless Steel Vertical Racks for EPPi 45 EPPi 50 Siehe Erklärung unten. 1) See explanation below. 1) Anzahl Höhe Höhe No.of Height Height Boxes (mm) (mm) 4 194 TE45-04 226 TE50-04 5 241 TE45-05 281 TE50-05 6 288 TE45-06 336 TE50-06 7 335 TE45-07 391 TE50-07 8 382 TE45-08 446 TE50-08 9 429 TE45-09 501 TE50-09 10 476 TE45-10 556 TE50-10 11 523 TE45-11 611 TE50-11 12 570 TE45-12 666 TE50-12 13 617 TE45-13 721 TE50-13 14 664 TE45-14 776 TE50-14 15 711 TE45-15. 16 758 TE45-16. H T (F-B) 139 mm N 136 mm S Edelstahl - Schrankgestelle für Stainless Steel Horizontal Racks for EPPi 45 EPPi 50 Siehe Erklärung unten. 1) See explanation below. 1) Anzahl Maße Maße TxH (mm) TxH (mm) No.of Dimensions Dimensions Boxes F-B x H (mm) F-B x H (mm) 8 (2x4) 278 x 192 SE45-24N 278 x 224 SE50-24N 10 (2x5) 278 x 239 SE45-25N 278 x 279 SE50-25N 12 (2x6) 278 x 286 SE45-26N 278 x 334 SE50-26N 14 (2x7) 278 x 333 SE45-27N 278 x 389 SE50-27N 9 (3x3) 414 x 145 SE45-33N 414 x 169 SE50-33N 12 (3x4) 414 x 192 SE45-34N 414 x 224 SE50-34N 15 (3x5) 414 x 239 SE45-35N 414 x 279 SE50-35N 18 (3x6) 414 x 286 SE45-36N 414 x 334 SE50-36N 21 (3x7) 414 x 333 SE45-37N 414 x 389 SE50-37N 12 (4x3) 549 x 145 SE45-43N 549 x 169 SE50-43N 16 (4x4) 549 x 192 SE45-44N 549 x 224 SE50-44N 20 (4x5) 549 x 239 SE45-45N 549 x 279 SE50-45N 24 (4x6) 549 x 286 SE45-46N 549 x 334 SE50-46N 28 (4x7) 549 x 333 SE45-47N 549 x 389 SE50-47N 15 (5x3) 685 x 145 SE45-53N 685 x 169 SE50-53N 20 (5x4) 685 x 192 SE45-54N 685 x 224 SE50-54N 25 (5x5) 685 x 239 SE45-55N 685 x 279 SE50-55N 30 (5x6) 685 x 286 SE45-56N 685 x 334 SE50-56N 35 (5x7) 685 x 333 SE45-57N 685 x 389 SE50-57N Alle Edelstahl-Schrankgestelle sind zum gleichen Preis auch mit 136 mm Breite lieferbar. Bitte in diesem Fall am Ende der Bestellnummer das N durch ein S ersetzen. All Stainless Steel Horizontal Racks are also available with a width of 136 mm. When ordering, please use an S instead of the N at the end of the catalogue number. 1) EPPi 45 Gestelle und Einschübe sind nur für Boxen mit max. 45 mm Höhe geeignet. Bei Boxenhöhen > 45 mm und < 53 mm bitte die EPPi 50 Gestelle und Einschübe wählen. Racks for EPPi 45 boxes are only made for boxes not higher than 45 mm. Please choose EPPi 50 racks for boxes > 45 mm and < 53 mm in height. Reg.No. KAT-EPPi-G-GB-100106 All rights and changes reserved. Printed in Germany. 9A.4
EPPi-Rack Schrankeinschübe für EPPi-Rack Horizontal Racks for EPPi 45 EPPi 50 Edelstahl Stainless Steel EPPi 45 Siehe Erklärung unten. 1) See explanation below. 1) EPPi 50 1) EPPi 45 Gestelle und Einschübe sind nur für Boxen mit max. 45 mm Höhe geeignet. Bei Boxenhöhen > 45 mm und < 53 mm bitte die EPPi 50 Gestelle und Einschübe wählen. Racks for EPPi 45 boxes are only made for boxes not higher than 45 mm. Please choose EPPi 50 racks for boxes > 45 mm and < 53 mm in height. Reg.No. KAT-EPPi-G-GB-100106 All rights and changes reserved. Printed in Germany. 9A.5
EPPi 0,2 PCR 12x12 Fächer für 144 PCR-Reaktionsgefäße 0,2 ml in Strips oder einzeln. 12x12 Divider holds 144 Reaction Vessels 0.2 ml in strips or single. transparent natural KE32-CS144NA NEON - gelb NEON NEON yellow KE32-CS144NY NEON - blau NEON NEON blue KE32-CS144NB NEON - grün NEON NEON green KE32-CS144NG NEON - rot/pink NEON NEON red/pink KE32-CS144NP NEON - orange NEON NEON orange KE32-CS144NO weiß white KE32-CS144WH gelb yellow KE32-CS144YE blau blue KE32-CS144BU grün green KE32-CS144GR rot red KE32-CS144RE violett violet KE32-CS144VT schwarz black KE32-CS144BL schwarz- black- KE32-CS144BB Gestelle / Einschübe Seite 7-8, 22 Racks on page 7-8, 22. 37 mm EPPi 0,5 Mini transparent natural KE37-C100NA NEON - gelb NEON NEON yellow KE37-C100NY NEON - blau NEON NEON blue KE37-C100NB NEON - grün NEON NEON green KE37-C100NG NEON - rot/pink NEON NEON red/pink KE37-C100NP NEON - orange NEON NEON orange KE37-C100NO 10x10 Fächer für 100 Reaktionsgefäße 0,5 ml oder Röhrchen bis 10 mm Ø. 10x10 Divider holds 100 Reaction Vessels 0.5 ml or vials up to 10 mm dia. weiß white KE37-C100WH gelb yellow KE37-C100YE blau blue KE37-C100BU grün green KE37-C100GR rot red KE37-C100RE violett violet KE37-C100VT schwarz black KE37-C100BL schwarz- black- KE37-C100BB Gestelle / Einschübe Seite 7-8, 22 Racks on page 7-8, 22. Reg.No. KAT-EPPi-G-GB-100106 All rights and changes reserved. Printed in Germany. 9A.6
H Edelstahl -Truhengestelle für Stainless Steel Vertical Racks for EPPi 0,2 PCR EPPi 0,5 Mini 138 mm 138 mm Anzahl Höhe Anzahl Höhe No.of Height No.of Height Boxes (mm) Boxes (mm) 8 282 TE32-08 5 204 TE37-05 9 317 TE32-09 6 243 TE37-06 10 351 TE32-10 7 283 TE37-07 11 386 TE32-11 8 322 TE37-08 12 420 TE32-12 9 362 TE37-09 13 455 TE32-13 10 401 TE37-10 14 489 TE32-14 11 441 TE37-11 15 524 TE32-15 12 480 TE37-12 16 558 TE32-16 13 520 TE37-13 17 593 TE32-17 14 559 TE37-14 18 627 TE32-18 15 599 TE37-15 19 662 TE32-19 16 638 TE37-16 20 696 TE32-20 17 678 TE37-17 21 731 TE32-21 18 717 TE37-18 22 765 TE32-22 19 757 TE37-19 20 796 TE37-20 H T (F-B) 139 mm N 136 mm S Edelstahl - Schrankgestelle für Stainless Steel Horizontal Racks for EPPi 0,2 PCR EPPi 0,5 Mini Anzahl Maße Maße TxH (mm) TxH (mm). No.of Dimensions Dimensions Boxes F-B x H (mm) F-B x H (mm). 10 (2x5) 278 x 176 SE32-25N 278 x 201 SE37-25N 12 (2x6) 278 x 211 SE32-26N 278 x 241 SE37-26N 14 (2x7) 278 x 245 SE32-27N 278 x 280 SE37-27N 16 (2x8) 278 x 280 SE32-28N 278 x 320 SE37-28N 18 (2x9) 278 x 314 SE32-29N 278 x 359 SE37-29N 15 (3x5) 414 x 176 SE32-35N 414 x 201 SE37-35N 18 (3x6) 414 x 211 SE32-36N 414 x 241 SE37-36N 21 (3x7) 414 x 245 SE32-37N 414 x 280 SE37-37N 24 (3x8) 414 x 280 SE32-38N 414 x 320 SE37-38N 27 (3x9) 414 x 314 SE32-39N 414 x 359 SE37-39N 20 (4x5) 549 x 176 SE32-45N 549 x 201 SE37-45N 24 (4x6) 549 x 211 SE32-46N 549 x 241 SE37-46N 28 (4x7) 549 x 245 SE32-47N 549 x 280 SE37-47N 32 (4x8) 549 x 280 SE32-48N 549 x 320 SE37-48N 36 (4x9) 549 x 314 SE32-49N 549 x 359 SE37-49N 25 (5x5) 685 x 176 SE32-55N 685 x 201 SE37-55N 30 (5x6) 685 x 211 SE32-56N 685 x 241 SE37-56N 35 (5x7) 685 x 245 SE32-57N 685 x 280 SE37-57N 40 (5x8) 685 x 280 SE32-58N 685 x 320 SE37-58N 45 (5x9) 685 x 314 SE32-59N 685 x 359 SE37-59N Alle Edelstahl-Schrankgestelle sind zum gleichen Preis auch mit 136 mm Breite lieferbar. Bitte in diesem Fall am Ende der Bestellnummer das N durch ein S ersetzen. All Stainless Steel Horizontal Racks are also available with a width of 136 mm. When ordering, please use an S instead of the N at the end of the catalogue number. Reg.No. KAT-EPPi-G-GB-100106 All rights and changes reserved. Printed in Germany. 9A.7
EPPi-Rack Schrankeinschübe für EPPi-Rack Horizontal Racks for EPPi 0,2 PCR EPPi 0,5 Mini Edelstahl Stainless Steel EPPi 0,2 PCR EPPi 0,5 Mini Reg.No. KAT-EPPi-G-GB-100106 All rights and changes reserved. Printed in Germany. 9A.8
80 mm EPPi 70 70 mm variabel 80 mm EPPi 80 EPPi 75 75 mm 9x9 Fächer für 81 Röhrchen bis 12,5 mm Ø 9x9 Divider holds 81 vials up to 12.5 mm dia. EPPi 70 / 9x9 EPPi 75 / 9x9 EPPi 80 / 9x9 Variabel variable 70-80 mm Innenhöhe inner height 73 mm Innenhöhe inner height 77 mm transparent natural KE70-V81NA KE75-C81NA KE80-C81NA NEON - gelb NEON NEON yellow KE70-V81NY KE75-C81NY KE80-C81NY NEON - blau NEON NEON blue KE70-V81NB KE75-C81NB KE80-C81NB NEON - grün NEON NEON green KE70-V81NG KE75-C81NG KE80-C81NG NEON - rot/pink NEON NEON red/pink KE70-V81NP KE75-C81NP KE80-C81NP NEON - orange NEON NEON orange KE70-V81NO KE75-C81NO KE80-C81NO weiß white KE70-V81WH KE75-C81WH KE80-C81WH gelb yellow KE70-V81YE KE75-C81YE KE80-C81YE blau blue KE70-V81BU KE75-C81BU KE80-C81BU grün green KE70-V81GR KE75-C81GR KE80-C81GR rot red KE70-V81RE KE75-C81RE KE80-C81RE violett violet KE70-V81VT KE75-C81VT KE80-C81VT schwarz black KE70-V81BL KE75-C81BL KE80-C81BL schwarz- black- KE70-V81BB KE75-C81BB KE80-C81BB Gestelle / Einschübe Seite 11-12, 22 Racks on page 11-12, 22. 80 mm EPPi 70 70 mm variabel 80 mm EPPi 80 EPPi 75 75 mm 7x7 Fächer für 49 Röhrchen bis 16,5 mm Ø 7x7 Divider holds 49 vials up to 16.5 mm dia. EPPi 70 / 7x7 EPPi 75 / 7x7 EPPi 80 / 7x7 Variabel variable 70-80 mm Innenhöhe inner height 73 mm Innenhöhe inner height 77 mm transparent natural KE70-V49NA KE75-C49NA KE80-C49NA NEON - gelb NEON NEON yellow KE70-V49NY KE75-C49NY KE80-C49NY NEON - blau NEON NEON blue KE70-V49NB KE75-C49NB KE80-C49NB NEON - grün NEON NEON green KE70-V49NG KE75-C49NG KE80-C49NG NEON - rot/pink NEON NEON red/pink KE70-V49NP KE75-C49NP KE80-C49NP NEON - orange NEON NEON orange KE70-V49NO KE75-C49NO KE80-C49NO weiß white KE70-V49WH KE75-C49WH KE80-C49WH gelb yellow KE70-V49YE KE75-C49YE KE80-C49YE blau blue KE70-V49BU KE75-C49BU KE80-C49BU grün green KE70-V49GR KE75-C49GR KE80-C49GR rot red KE70-V49RE KE75-C49RE KE80-C49RE violett violet KE70-V49VT KE75-C49VT KE80-C49VT schwarz black KE70-V49BL KE75-C49BL KE80-C49BL schwarz- black- KE70-V49BB KE75-C49BB KE80-C49BB Gestelle / Einschübe Seite 11-12, 22 Racks on page 11-12, 22. Reg.No. KAT-EPPi-G-GB-100106 All rights and changes reserved. Printed in Germany. 9A.9
80 mm EPPi 70 70 mm variabel 80 mm EPPi 80 EPPi 75 75 mm Rastereinsätze siehe unten See Grid Dividers below Ohne Fächereinteilung. Geeignet für EPPi Rastereinsätze. Without Divider. Useful for EPPi Grid Dividers. EPPi 70 / 1x1 EPPi 75 / 1x1 EPPi 80 / 1x1 Variabel variable 70-80 mm Innenhöhe inner height 73 mm Innenhöhe inner height 77 transparent natural KE70-V1NA KE75-C1NA KE80-C1NA NEON - gelb NEON NEON yellow KE70-V1NY KE75-C1NY KE80-C1NY NEON - blau NEON NEON blue KE70-V1NB KE75-C1NB KE80-C1NB NEON - grün NEON NEON green KE70-V1NG KE75-C1NG KE80-C1NG NEON - rot/pink NEON NEON red/pink KE70-V1NP KE75-C1NP KE80-C1NP NEON - orange NEON NEON orange KE70-V1NO KE75-C1NO KE80-C1NO weiß white KE70-VT1WH KE75-C1WH KE80-C1WH gelb yellow KE70-VT1YE KE75-C1YE KE80-C1YE blau blue KE70-VT1BU KE75-C1BU KE80-C1BU grün green KE70-VT1GR KE75-C1GR KE80-C1GR rot red KE70-VT1RE KE75-C1RE KE80-C1RE violett violet KE70-VT1VT KE75-C1VT KE80-C1VT schwarz black KE70-V1BL KE75-C1BL KE80-C1BL schwarz- black- KE70-V1BB KE75-C1BB KE80-C1BB Gestelle / Einschübe Seite 11-12, 22 Racks on page 11-12, 22. EPPi Rastereinsätze EPPi Grid Dividers K = Aus Polypropylen (PP) K = Made of Polypropylen (PP) N = Aus Kartonmaterial N = Made of fiberboard H = 25 mm H = 30 mm H = 40 mm H = 65 mm Fächer Röhrchen-ø bis Grid Vials up to diam. 14x14 ca. 7,0 mm RE0251414N RE0301414N RE0401414N RE0651414N 13x13 ca. 8,0 mm RE0251313N RE0301313N RE0401313N RE0651313N 12x12 ca. 9,0 mm RE0251212N RE0301212N RE0401212N RE0651212N 10x10 ca. 12,0 mm RE0251010N RE0301010K RE0401010N RE0651010N 9x9 ca. 13,0 mm RE0250909N RE0300909K RE0400909N RE0650909N 8x8 ca. 14,0 mm RE0250808N RE0300808K RE0400808N RE0650808N 7x7 ca. 16,5 mm RE0250707N RE0300707N RE0400707N RE0650707N 6x6 ca. 19,0 mm RE0250606N RE0300606N RE0400606N RE0650606N 5x5 ca. 23,0 mm RE0250505N RE0300505K RE0400505N RE0650505N 4x4 ca. 30,0 mm RE0250404N RE0300404K RE0400404N RE0650404N 3x3 ca. 40,0 mm RE0250303N RE0300303N RE0400303N RE0650303N Andere Größen auf Anfrage. Other sizes on request. Reg.No. KAT-EPPi-G-GB-100106 All rights and changes reserved. Printed in Germany. 9A.10
H Edelstahl -Truhengestelle für Stainless Steel Vertical Racks for EPPi 70 EPPi 75 EPPi 80 Siehe Erklärung unten. 1) 138 mm 138 mm Anzahl No. of Boxes See explanation below. 1) Höhe (mm) Height (mm) Höhe (mm) Height (mm) Höhe (mm) Height (mm) 3 225 TE70-03 242 TE75-03 252 TE80-03 4 298 TE70-04 320 TE75-04 334 TE80-04 5 371 TE70-05 399 TE75-05 416 TE80-05 6 444 TE70-06 477 TE75-06 498 TE80-06 7 517 TE70-07 556 TE75-07 580 TE80-07 8 590 TE70-08 634 TE75-08 662 TE80-08 9 663 TE70-09 713 TE75-09 744 TE80-09 10 736 TE70-10 791 TE75-10. 11 809 TE70-11 H T (F-B) 139 mm N 136 mm S Edelstahl - Schrankgestelle für Stainless Steel Horizontal Racks for EPPi 70 EPPi 75 EPPi 80 Siehe Erklärung unten. 1) See explanation below. 1) Anzahl (TxH) No. of Boxes (F-B x H) Maße TxH (mm) Dimensions F-BxH (mm) Maße TxH (mm) Dimensions F-BxH (mm) Maße TxH (mm) Dimensions F-BxH (mm) 6 (3x2) 414 x 150 SE70-32N 414 x 161 SE75-32N 414 x 168 SE80-32N 9 (3x3) 414 x 223 SE70-33N 414 x 239 SE75-33N 414 x 250 SE80-33N 12 (3x4) 414 x 296 SE70-34N 414 x 318 SE75-34N 414 x 332 SE80-34N 8 (4x2) 549 x 150 SE70-42N 549 x 161 SE75-42N 549 x 168 SE80-42N 12 (4x3) 549 x 223 SE70-43N 549 x 239 SE75-43N 549 x 250 SE80-43N 16 (4x4) 549 x 296 SE70-44N 549 x 318 SE75-44N 549 x 332 SE80-44N 10 (5x2) 685 x 150 SE70-52N 685 x 161 SE75-52N 685 x 168 SE80-52N 15 (5x3) 685 x 223 SE70-53N 685 x 239 SE75-53N 685 x 250 SE80-53N 20 (5x4) 685 x 296 SE70-54N 685 x 318 SE75-54N 685 x 332 SE80-54N Alle Edelstahl-Schrankgestelle sind zum gleichen Preis auch mit 136 mm Breite lieferbar. Bitte in diesem Fall am Ende der Bestellnummer das N durch ein S ersetzen. All Stainless Steel Horizontal Racks are also available with a width of 136 mm. When ordering, please use an S instead of the N at the end of the catalogue number. 1) EPPi 70 Gestelle und Einschübe sind nur für Boxen mit max. 70 mm Höhe geeignet. Bei Boxenhöhen > 70 mm und < 80 mm bitte die EPPi 75 oder EPPi 80 Gestelle und Einschübe wählen. Racks for EPPi 70 boxes are only made for boxes not higher than 70 mm. Please choose EPPi 75 or EPPi 80 racks for boxes > 70 mm and < 80 mm in height. Alle Gestelle und Einschübe können mit zusätzlichen Fächern bzw. Schubladen hergestellt werden, um den Innenraum von Tiefkühltruhen und -schränken maximal auszunutzen. All racks can be manufactured with additional compartments or drawers in order to make maximum use of the space inside chest and upright freezers. Reg.No. KAT-EPPi-G-GB-100106 All rights and changes reserved. Printed in Germany. 9A.11
EPPi-Rack Schrankeinschübe für EPPi-Rack Horizontal Racks for EPPi 70 / EPPi 75 / EPPi 80 Edelstahl Stainless Steel EPPi 70 Siehe Erklärung unten. 1) See explanation below. 1) EPPi 75 EPPi 80 1) EPPi 70 Gestelle und Einschübe sind nur für Boxen mit max. 70 mm Höhe geeignet. Bei Boxenhöhen > 70 mm und < 80 mm bitte die EPPi 75 oder EPPi 80 Gestelle und Einschübe wählen. Racks for EPPi 70 boxes are only made for boxes not higher than 70 mm. Please choose EPPi 75 or EPPi 80 racks for boxes > 70 mm and < 80 mm in height. Alle Gestelle und Einschübe können mit zusätzlichen Fächern bzw. Schubladen hergestellt werden, um den Innenraum von Tiefkühltruhen und -schränken maximal auszunutzen. All racks can be manufactured with additional compartments or drawers in order to make maximum use of the space inside chest and upright freezers. Reg.No. KAT-EPPi-G-GB-100106 All rights and changes reserved. Printed in Germany. 9A.12
106 mm EPPi 96 EPPi 102 96 mm variabel 102 mm 9x9 Fächer für 81 Röhrchen bis 12,5 mm Ø 9x9 Divider holds 81 vials up to 12.5 mm dia. EPPi 96 / 9x9 EPPi 102 / 9x9 Variabel variable 96-106 mm Innenhöhe inner height 100 mm transparent natural KE96-V81NA KE102-C81NA NEON - gelb NEON NEON yellow KE96-V81NY KE102-C81NY NEON - blau NEON NEON blue KE96-V81NB KE102-C81NB NEON - grün NEON NEON green KE96-V81NG KE102-C81NG NEON - rot/pink NEON NEON red/pink KE96-V81NP KE102-C81NP NEON - orange NEON NEON orange KE96-V81NO KE102-C81NO weiß white KE96-V81WH KE102-C81WH gelb yellow KE96-V81YE KE102-C81YE blau blue KE96-V81BU KE102-C81BU grün green KE96-V81GR KE102-C81GR rot red KE96-V81RE KE102-C81RE violett violet KE96-V81VT KE102-C81VT schwarz black KE96-V81BL KE102-C81BL schwarz- black- KE96-V81BB KE102-C81BB Gestelle / Einschübe Seite 15-16, 22 Racks on page 15-16, 22. 106 mm EPPi 96 EPPi 102 96 mm variabel 102 mm 7x7 Fächer für 49 Röhrchen bis 16,5 mm Ø 7x7 Divider holds 49 vials up to 16.5 mm dia. EPPi 96 / 7x7 EPPi 102 / 7x7 Variabel variable 96-106 mm Innenhöhe inner height 100 mm transparent natural KE96-V49NA KE102-C49NA NEON - gelb NEON NEON yellow KE96-V49NY KE102-C49NY NEON - blau NEON NEON blue KE96-V49NB KE102-C49NB NEON - grün NEON NEON green KE96-V49NG KE102-C49NG NEON - rot/pink NEON NEON red/pink KE96-V49NP KE102-C49NP NEON - orange NEON NEON orange KE96-V49NO KE102-C49NO weiß white KE96-V49WH KE102-C49WH gelb yellow KE96-V49YE KE102-C49YE blau blue KE96-V49BU KE102-C49BU grün green KE96-V49GR KE102-C49GR rot red KE96-V49RE KE102-C49RE violett violet KE96-V49VT KE102-C49VT schwarz black KE96-V49BL KE102-C49BL schwarz- black- KE96-V49BB KE102-C49BB Gestelle / Einschübe Seite 15-16, 22 Racks on page 15-16, 22. Reg.No. KAT-EPPi-G-GB-100106 All rights and changes reserved. Printed in Germany. 9A.13
106 mm EPPi 96 EPPi 102 96 mm variabel 102 mm Rastereinsätze siehe unten See Grid Dividers below Ohne Fächereinteilung. Geeignet für EPPi Rastereinsätze. Without Divider. Useful for EPPi Grid Dividers. EPPi 96 / 1x1 EPPi 102 / 1x1 Variabel variable 96-106 mm Innenhöhe inner height 100 mm transparent natural KE96-V1NA KE102-C1NA NEON - gelb NEON NEON yellow KE96-V1NY KE102-C1NY NEON - blau NEON NEON blue KE96-V1NB KE102-C1NB NEON - grün NEON NEON green KE96-V1NG KE102-C1NG NEON - rot/pink NEON NEON red/pink KE96-V1NP KE102-C1NP NEON - orange NEON NEON orange KE96-V1NO KE102-C1NO weiß white KE96-V1WH KE102-C1WH gelb yellow KE96-V1YE KE102-C1YE blau blue KE96-V1BU KE102-C1BU grün green KE96-V1GR KE102-C1GR rot red KE96-V1RE KE102-C1RE violett violet KE96-V1VT KE102-C1VT schwarz black KE96-V1BL KE102-C1BL schwarz- black- KE96-V1BB KE102-C1BB Gestelle / Einschübe Seite 15-16, 22 Racks on page 15-16, 22. EPPi Rastereinsätze EPPi Grid Dividers K = Aus Polypropylen (PP) K = Made of Polypropylen (PP) N = Aus Kartonmaterial N = Made of fiberboard H = 25 mm H = 30 mm H = 40 mm H = 65 mm Fächer Röhrchen-ø bis Grid Vials up to diam. 14x14 ca. 7,0 mm RE0251414N RE0301414N RE0401414N RE0651414N 13x13 ca. 8,0 mm RE0251313N RE0301313N RE0401313N RE0651313N 12x12 ca. 9,0 mm RE0251212N RE0301212N RE0401212N RE0651212N 10x10 ca. 12,0 mm RE0251010N RE0301010K RE0401010N RE0651010N 9x9 ca. 13,0 mm RE0250909N RE0300909K RE0400909N RE0650909N 8x8 ca. 14,0 mm RE0250808N RE0300808K RE0400808N RE0650808N 7x7 ca. 16,5 mm RE0250707N RE0300707N RE0400707N RE0650707N 6x6 ca. 19,0 mm RE0250606N RE0300606N RE0400606N RE0650606N 5x5 ca. 23,0 mm RE0250505N RE0300505K RE0400505N RE0650505N 4x4 ca. 30,0 mm RE0250404N RE0300404K RE0400404N RE0650404N 3x3 ca. 40,0 mm RE0250303N RE0300303N RE0400303N RE0650303N Andere Größen auf Anfrage. Other sizes on request. Reg.No. KAT-EPPi-G-GB-100106 All rights and changes reserved. Printed in Germany. 9A.14
H Edelstahl -Truhengestelle für Stainless Steel Vertical Racks for EPPi 96 EPPi 102 Siehe Erklärung unten. 1) 138 mm 138 mm See explanation below. 1) Anzahl Höhe Höhe No.of Height Height Boxes (mm) (mm) 3 303 TE96-03 321 TE102-03 4 402 TE96-04 426 TE102-04 5 501 TE96-05 531 TE102-05 6 600 TE96-06 636 TE102-06 7 699 TE96-07 741 TE102-07 8 798 TE96-08 H T (F-B) 139 mm N 136 mm S Edelstahl - Schrankgestelle für Stainless Steel Horizontal Racks for EPPi 96 EPPi 102 Siehe Erklärung unten. 1) See explanation below. 1) Anzahl Maße Maße TxH (mm) TxH (mm) No.of Dimensions Dimensions Boxes F-B x H (mm) F-B x H (mm) 6 (3x2) 414 x 202 SE96-32N 414 x 214 SE102-32N 9 (3x3) 414 x 301 SE96-33N 414 x 319 SE102-33N 8 (4x2) 549 x 202 SE96-42N 549 x 214 SE102-42N 12 (4x3) 549 x 301 SE96-43N 549 x 319 SE102-43N Alle Edelstahl-Schrankgestelle sind zum gleichen Preis auch mit 136 mm Breite lieferbar. Bitte in diesem Fall am Ende der Bestellnummer das N durch ein S ersetzen. All Stainless Steel Horizontal Racks are also available with a width of 136 mm. When ordering, please use an S instead of the N at the end of the catalogue number. 1) EPPi 96 Gestelle und Einschübe sind nur für Boxen mit max. 96 mm Höhe geeignet. Bei Boxenhöhen > 96 mm und < 102 mm bitte die EPPi 102 Gestelle und Einschübe wählen. Racks for EPPi 96 boxes are only made for boxes not higher than 96 mm. Please choose EPPi 102 racks for boxes > 96 mm and < 102 mm in height. Alle Gestelle und Einschübe können mit zusätzlichen Fächern bzw. Schubladen hergestellt werden, um den Innenraum von Tiefkühltruhen und -schränken maximal auszunutzen. All racks can be manufactured with additional compartments or drawers in order to make maximum use of the space inside chest and upright freezers. Reg.No. KAT-EPPi-G-GB-100106 All rights and changes reserved. Printed in Germany. 9A.15
EPPi-Rack Schrankeinschübe für EPPi-Rack Horizontal Racks for Edelstahl Stainless Steel EPPi 96 EPPi 102 EPPi culture 96 EPPi 96 EPPi culture 96 Siehe Erklärung unten. 1) See explanation below. 1) EPPi 102 1) EPPi 96 Gestelle und Einschübe sind nur für Boxen mit max. 96 mm Höhe geeignet. Bei Boxenhöhen > 96 mm und < 102 mm bitte die EPPi 102 Gestelle und Einschübe wählen. Racks for EPPi 96 boxes are only made for boxes not higher than 96 mm. Please choose EPPi 102 racks for boxes > 96 mm and < 102 mm in height. Alle Gestelle und Einschübe können mit zusätzlichen Fächern bzw. Schubladen hergestellt werden, um den Innenraum von Tiefkühltruhen und -schränken maximal auszunutzen. All racks can be manufactured with additional compartments or drawers in order to make maximum use of the space inside chest and upright freezers. Reg.No. KAT-EPPi-G-GB-100106 All rights and changes reserved. Printed in Germany. 9A.16
105 mm EPPi 105 EPPi 128 128 mm 9x9 Fächer für 81 Röhrchen bis 12,5 mm Ø 9x9 Divider holds 81 vials up to 12.5 mm dia. EPPi 105 / 9x9 EPPi 128 / 9x9 Innenhöhe inner height 103 mm Innenhöhe inner height 125 mm transparent natural KE105-C81NA KE128-C81NA NEON - gelb NEON NEON yellow KE105-C81NY KE128-C81NY NEON - blau NEON NEON blue KE105-C81NB KE128-C81NB NEON - grün NEON NEON green KE105-C81NG KE128-C81NG NEON - rot/pink NEON NEON red/pink KE105-C81NP KE128-C81NP NEON - orange NEON NEON orange KE105-C81NO KE128-C81NO weiß white KE105-C81WH KE128-C81WH gelb yellow KE105-C81YE KE128-C81YE blau blue KE105-C81BU KE128-C81BU grün green KE105-C81GR KE128-C81GR rot red KE105-C81RE KE128-C81RE violett violet KE105-C81VT KE128-C81VT schwarz black KE105-C81BL KE128-C81BL schwarz- black- KE105-C81BB KE128-C81BB Gestelle / Einschübe Seite 20-22, Racks on page 20-22. 105 mm EPPi 105 EPPi 128 128 mm 7x7 Fächer für 49 Röhrchen bis 16,5 mm Ø 7x7 Divider holds 49 vials up to 16.5 mm dia. EPPi 105 / 7x7 EPPi 128 / 7x7 Innenhöhe inner height 103 mm Innenhöhe inner height 125 mm transparent natural KE105-C49NA KE128-C49NA NEON - gelb NEON NEON yellow KE105-C49NY KE128-C49NY NEON - blau NEON NEON blue KE105-C49NB KE128-C49NB NEON - grün NEON NEON green KE105-C49NG KE128-C49NG NEON - rot/pink NEON NEON red/pink KE105-C49NP KE128-C49NP NEON - orange NEON NEON orange KE105-C49NO KE128-C49NO weiß white KE105-C49WH KE128-C49WH gelb yellow KE105-C49YE KE128-C49YE blau blue KE105-C49BU KE128-C49BU grün green KE105-C49GR KE128-C49GR rot red KE105-C49RE KE128-C49RE violett violet KE105-C49VT KE128-C49VT schwarz black KE105-C49BL KE128-C49BL schwarz- black- KE105-C49BB KE128-C49BB Gestelle / Einschübe Seite 20-22, Racks on page 20-22. Reg.No. KAT-EPPi-G-GB-100106 All rights and changes reserved. Printed in Germany. 9A.17
105 mm EPPi 105 EPPi 128 128 mm Rastereinsätze siehe unten See Grid Dividers below Ohne Fächereinteilung. Geeignet für EPPi Rastereinsätze. Without Divider. Useful for EPPi Grid Dividers. EPPi 105 / 1x1 EPPi 128 / 1x1 Innenhöhe inner height 103 mm Innenhöhe inner height 125 mm transparent natural KE105-C1NA KE128-C1NA NEON - gelb NEON NEON yellow KE105-C1NY KE128-C1NY NEON - blau NEON NEON blue KE105-C1NB KE128-C1NB NEON - grün NEON NEON green KE105-C1NG KE128-C1NG NEON - rot/pink NEON NEON red/pink KE105-C1NP KE128-C1NP NEON - orange NEON NEON orange KE105-C1NO KE128-C1NO weiß white KE105-C1WH KE128-C1WH gelb yellow KE105-C1YE KE128-C1YE blau blue KE105-C1BU KE128-C1BU grün green KE105-C1GR KE128-C1GR rot red KE105-C1RE KE128-C1RE violett violet KE105-C1VT KE128-C1VT schwarz black KE105-C1BL KE128-C1BL schwarz- black- KE105-C1BB KE128-C1BB Gestelle / Einschübe Seite 20-22, Racks on page 22-22. EPPi Rastereinsätze EPPi Grid Dividers K = Aus Polypropylen (PP) K = Made of Polypropylen (PP) N = Aus Kartonmaterial N = Made of fiberboard H = 25 mm H = 30 mm H = 40 mm H = 65 mm Fächer Röhrchen-ø bis Grid Vials up to diam. 14x14 ca. 7,0 mm RE0251414N RE0301414N RE0401414N RE0651414N 13x13 ca. 8,0 mm RE0251313N RE0301313N RE0401313N RE0651313N 12x12 ca. 9,0 mm RE0251212N RE0301212N RE0401212N RE0651212N 10x10 ca. 12,0 mm RE0251010N RE0301010K RE0401010N RE0651010N 9x9 ca. 13,0 mm RE0250909N RE0300909K RE0400909N RE0650909N 8x8 ca. 14,0 mm RE0250808N RE0300808K RE0400808N RE0650808N 7x7 ca. 16,5 mm RE0250707N RE0300707N RE0400707N RE0650707N 6x6 ca. 19,0 mm RE0250606N RE0300606N RE0400606N RE0650606N 5x5 ca. 23,0 mm RE0250505N RE0300505K RE0400505N RE0650505N 4x4 ca. 30,0 mm RE0250404N RE0300404K RE0400404N RE0650404N 3x3 ca. 40,0 mm RE0250303N RE0300303N RE0400303N RE0650303N Andere Größen auf Anfrage. Other sizes on request. Reg.No. KAT-EPPi-G-GB-100106 All rights and changes reserved. Printed in Germany. 9A.18
106 mm EPPi culture 96 EPPi culture 105 96 mm variabel 105 mm Für 25 Kulturröhrchen bis 17 mm Ø For 25 culture tubes up to 17 mm dia. EPPi culture 96 EPPi culture 105 Variabel variable 96-106 mm Innenhöhe inner height 103 mm transparent natural KE96-VO25NA KE105-CO25NA NEON - gelb NEON NEON yellow KE96-VO25NY KE105-CO25NY NEON - blau NEON NEON blue KE96-VO25NB KE105-CO25NB NEON - grün NEON NEON green KE96-VO25NG KE105-CO25NG NEON - rot/pink NEON NEON red/pink KE96-VO25NP KE105-CO25NP NEON - orange NEON NEON orange KE96-VO25NO KE105-CO25NO weiß white KE96-VO25WH KE105-CO25WH gelb yellow KE96-VO25YE KE105-CO25YE blau blue KE96-VO25BU KE105-CO25BU grün green KE96-VO25GR KE105-CO25GR rot red KE96-VO25RE KE105-CO25RE violett violet KE96-VO25VT KE105-CO25VT schwarz black KE96-VO25BL KE105-CO25BL schwarz- black- KE96-VO25BB KE105-CO25BB Gestelle / Einschübe Seite 15-16, 22. Racks on page 15-16, 22. Gestelle / Einschübe Seite 20-22. Racks on page 20-22. 128 mm holes holes 15 = 25 Löcher 50 = 10 Löcher Für 25 Zentrifugenröhrchen 15 ml (bis 17 mm Ø) oder 10 Zentrifugenröhrchen 50 ml (bis 30 mm Ø) For 25 centrifuge tubes 15 ml (up to 17 mm dia.) or 10 centrifuge tubes 50 ml (up to 30 mm dia.) EPPi cellbox 15 EPPi cellbox 50 Innenhöhe inner height 125 mm Innenhöhe inner height 125 mm transparent natural KE128-CO25NA NEON - gelb NEON NEON yellow KE128-CO25NY NEON - blau NEON NEON blue KE128-CO25NB NEON - grün NEON NEON green KE128-CO25NG NEON - rot/pink NEON NEON red/pink KE128-CO25NP NEON - orange NEON NEON orange KE128-CO25NO KE128-CO10NA KE128-CO10NY KE128-CO10NB KE128-CO10NG KE128-CO10NP KE128-CO10NO weiß white KE128-CO25WH KE128-CO10WH gelb yellow KE128-CO25YE KE128-CO10YE blau blue KE128-CO25BU KE128-CO10BU grün green KE128-CO25GR KE128-CO10GR rot red KE128-CO25RE KE128-CO10RE violett violet KE128-CO25VT KE128-CO10VT schwarz black KE128-CO25BL KE128-CO10BL schwarz- black- KE128-CO25BB KE128-CO10BB Gestelle / Einschübe Seite 20-22, Racks on page 20-22. Reg.No. KAT-EPPi-G-GB-100106 All rights and changes reserved. Printed in Germany. 9A.19
138 mm H 138 mm Edelstahl -Truhengestelle für Stainless Steel Vertical Racks for EPPi 105 EPPi 128 EPPi culture 105 EPPi cellbox Anzahl Höhe Höhe No.of Height Height Boxes (mm) (mm) 2 220 TE105-02 267 TE128-02 3 327 TE105-03 398 TE128-03 4 434 TE105-04 528 TE128-04 5 541 TE105-05 659 TE128-05 6 648 TE105-06 789 TE128-06 7 755 TE105-07 H T (F-B) 139 mm N 136 mm S Edelstahl - Schrankgestelle für Stainless Steel Horizontal Racks for EPPi 105 EPPi 128 EPPi culture 105 EPPi cellbox Anzahl Maße Maße TxH (mm) TxH (mm) No.of Dimensions Dimensions Boxes F-B x H (mm) F-B x H (mm) 6 (3x2) 414 x 218 SE105-32N 414 x 265 SE128-32N 9 (3x3) 414 x 325 SE105-33N 414 x 395 SE128-33N 8 (4x2) 549 x 218 SE105-42N 549 x 265 SE128-42N 12 (4x3) 549 x 325 SE105-43N 549 x 395 SE128-43N Alle Edelstahl-Schrankgestelle sind zum gleichen Preis auch mit 136 mm Breite lieferbar. Bitte in diesem Fall am Ende der Bestellnummer das N durch ein S ersetzen. All Stainless Steel Horizontal Racks are also available with a width of 136 mm. When ordering, please use an S instead of the N at the end of the catalogue number. Alle Gestelle und Einschübe können mit zusätzlichen Fächern bzw. Schubladen hergestellt werden, um den Innenraum von Tiefkühltruhen und -schränken maximal auszunutzen. All racks can be manufactured with additional compartments or drawers in order to make maximum use of the space inside chest and upright freezers. Reg.No. KAT-EPPi-G-GB-100106 All rights and changes reserved. Printed in Germany. 9A.20
EPPi-Rack Schrankeinschübe für EPPi-Rack Horizontal Racks for Edelstahl Stainless Steel EPPi 105 EPPi 128 EPPi culture 105 EPPi cellbox EPPi 105 EPPi culture 105 EPPi 128 EPPi cellbox Alle Gestelle und Einschübe können mit zusätzlichen Fächern bzw. Schubladen hergestellt werden, um den Innenraum von Tiefkühltruhen und -schränken maximal auszunutzen. All racks can be manufactured with additional compartments or drawers in order to make maximum use of the space inside chest and upright freezers. Reg.No. KAT-EPPi-G-GB-100106 All rights and changes reserved. Printed in Germany. 9A.21
Edelstahl - Schrankgestelle ohne Zwischenböden. Racks without horizontal dividers; therefore suitable for boxes with differing heights. Anzahl Fächer Maße Tiefe Höhe TxH (mm) No.of Compartments Dimensions F-B H F-B x H (mm) Für Boxen unterschiedlicher Höhe. For Boxes with differing heights. Ohne Zwischenböden Without Dividers 3 414 x 224 SE50-34OZN 4 549 x 224 SE50-44OZN 5 685 x 224 SE50-54OZN 3 414 x 279 SE50-35OZN 4 549 x 279 SE50-45OZN 5 685 x 279 SE50-55OZN Alle Edelstahl-Schrankgestelle sind zum gleichen Preis auch mit 136 mm Breite lieferbar. Bitte in diesem Fall am Ende der Bestellnummer das N durch ein S ersetzen. All Stainless Steel Horizontal Racks are also available with a width of 136 mm. When ordering, please use an S instead of the N at the end of the catalogue number. Wie lagert man Mikrotiterplatten? How to store Microtiter Plates? Mikrotiter-Schrankeinschübe für Standard Mikrotiterplatten 86x128x18 mm. Microtiter Horizontal Racks for standard microtiter plates 86x128x18 mm. Mikrotiter-Truhengestelle Microtiter Vertical Racks für Standard Mikrotiterplatten 86x128x18 mm for standard microtiter plates 86x128x18mm Anzahl Höhe Anzahl Höhe No.of Height No.of Height Boxes (mm) Boxes (mm) 15 306 TM86x128x18-15 27 546 TM86x128x18-27 16 326 TM86x128x18-16 28 566 TM86x128x18-28 17 346 TM86x128x18-17 29 586 TM86x128x18-29 18 366 TM86x128x18-18 30 606 TM86x128x18-30 19 386 TM86x128x18-19 31 626 TM86x128x18-31 20 406 TM86x128x18-20 32 646 TM86x128x18-32 21 426 TM86x128x18-21 33 666 TM86x128x18-33 22 446 TM86x128x18-22 34 686 TM86x128x18-34 23 466 TM86x128x18-23 35 706 TM86x128x18-35 24 486 TM86x128x18-24 36 726 TM86x128x18-36 25 506 TM86x128x18-25 37 746 TM86x128x18-37 26 526 TM86x128x18-26 38 766 TM86x128x18-38 National Lab GmbH Bereich Laborprodukte Grambeker Weg 157 D-23879 Mölln Tel: +49 4542/8491-70 Fax: +49 4542/8491-71 e-mail: LabSales@NationalLab.com Internet Reg. Nr. KAT-EPPi-G-GB-100106 2006 Copyright by National Lab, Mölln, Germany Alle Rechte und Änderungen vorbehalten. All rights and changes reserved. Printed in Germany 9A.22
National Lab ALPHA-Box 136x136 square Storage and Cryo Boxes ALPHA-Box square 136 x 136 ALPHA-Box 136 x 136 square Storage and Cryo Boxes Water-repellent fiberboard boxes suitable for ultra-low temperatures. With lid. External dimensions 136 x 136 mm. Height = inner height. Quality >>special<< with additional water-proof coating made of plastic. Height 32 mm Height 50 mm Height 75 mm Height 100 mm Height Type A32-1 Type A50-1 Type A75-1 Type A100-1 Type A130-1 Colour WHITE standard 301015WE-1 301001WE-1 301002WE-1 301003WE-1 301004WE-1 spezial 301015WE-2 301001WE-2 301002WE-2 301003WE-2 301004WE-2 YELLOW standard 301015GE-1 301001GE-1 301002GE-1 301003GE-1 301004GE-1 spezial 301015GE-2 301001GE-2 301002GE-2 301003GE-2 301004GE-2 BLUE standard 301015BL-1 301001BL-1 301002BL-1 301003BL-1 301004BL-1 spezial 301015BL-2 301001BL-2 301002BL-2 301003BL-2 301004BL-2 GREEN standard 301015GR-1 301001GR-1 301002GR-1 301003GR-1 301004GR-1 spezial 301015GR-2 301001GR-2 301002GR-2 301003GR-2 301004GR-2 RED standard 301015RO-1 301001RO-1 301002RO-1 301003RO-1 301004RO-1 spezial 301015RO-2 301001RO-2 301002RO-2 301003RO-2 301004RO-2 Grid Dividers for National Lab ALPHA-Box Fiberboard Boxes 14x14 cells for. Height 25 mm Height 30 mm Height 40 mm Height 65 mm vials up to 8.0 mm.302041-25 302041-30 302041-40 302041-65 13x13 cells for. vials up to 9.0 mm.302040-25 302040-30 302040-40 302040-65 12x12 cells for. vials up to 10.0 mm.302020-25 302020-30 302020-40 302020-65 10x10 cells for. vials up to 12.5 mm.302001-25 302001-30 302001-40 302001-65 9x9 cells for. vials up to 13.5 mm.302019-25 302019-30 302019-40 302019-65 8x8 cells for. vials up to 15.0 mm.302002-25 302002-30 302002-40 302002-65 7x7 cells for. vials up to 17.0 mm.302003-25 302003-30 302003-40 302003-65 6x6 cells for. vials up to 21.0 mm.302004-25 302004-30 302004-40 302004-65 5x5 cells for. vials up to 24.0 mm.302005-25 302005-30 302005-40 302005-65 4x4 cells for. vials up to 31.0 mm.302006-25 302006-30 302006-40 302006-65 Special sizes on request! Reg. No. ALPHA1-DB-GB-300305 All rights and changes reserved. 2005 Copyright by National Lab Printed in Germany. 1
National Lab Stainless Steel Vertical and Horizontal Racks for ALPHA-Box Cryo Boxes National Lab Stainless Steel Vertical Racks for ALPHA-Box Cryo Boxes (square). With Handle. Type of Dimensions No. of Box WxF-BxH (mm) Boxes For all brands 303130 A32-1 141 x 141 x 265 7 303131 A32-1 141 x 141 x 302 8 303132 A32-1 141 x 141 x 339 9 303133 A32-1 141 x 141 x 376 10 303134 A32-1 141 x 141 x 413 11 303135 A32-1 141 x 141 x 450 12 303136 A32-1 141 x 141 x 487 13 303137 A32-1 141 x 141 x 524 14 303138 A32-1 141 x 141 x 561 15 303139 A32-1 141 x 141 x 598 16 303140 A32-1 141 x 141 x 635 17 303141 A32-1 141 x 141 x 672 18 303142 A32-1 141 x 141 x 709 19 303143 A32-1 141 x 141 x 746 20 303061 A50-1 141 x 141 x 226 4 303062 A50-1 141 x 141 x 281 5 303001 A50-1 141 x 141 x 336 6 303002 A50-1 141 x 141 x 391 7 303003 A50-1 141 x 141 x 446 8 303057 A50-1 141 x 141 x 501 9 303004 A50-1 141 x 141 x 556 10 303005 A50-1 141 x 141 x 611 11 303058 A50-1 141 x 141 x 666 12 303059 A50-1 141 x 141 x 721 13 303060 A50-1 141 x 141 x 776 14 303006 A75-1 141 x 141 x 326 4 303007 A75-1 141 x 141 x 406 5 303008 A75-1 141 x 141 x 486 6 303009 A75-1 141 x 141 x 566 7 303010 A75-1 141 x 141 x 646 8 303063 A75-1 141 x 141 x 726 9 303064 A75-1 141 x 141 x 806 10 303011 A100-1 141 x 141 x 321 3 303012 A100-1 141 x 141 x 426 4 303013 A100-1 141 x 141 x 531 5 303014 A100-1 141 x 141 x 636 6 303065 A100-1 141 x 141 x 741 7 303015 A130-1 141 x 141 x 411 3 303016 A130-1 141 x 141 x 546 4 303017 A130-1 141 x 141 x 681 5 National Lab Stainless Steel Horizontal Racks for ALPHA-Box Cryo Boxes (square). With Handle. For all brands Type of Dimensions No. of Boxes Box WxF-BxH (mm) Forward-Back Height Total 304180-35 A32-1 142 x 426 x 189 3 5 15 304180-36 A32-1 142 x 426 x 226 3 6 18 304180-37 A32-1 142 x 426 x 263 3 7 21 304180-45 A32-1 142 x 565 x 189 4 5 20 304180-46 A32-1 142 x 565 x 226 4 6 24 304180-47 A32-1 142 x 565 x 263 4 7 28 304018 A50-1 142 x 286 x 224 2 4 8 304019 A50-1 142 x 286 x 279 2 5 10 304017 A50-1 142 x 426 x 169 3 3 9 304001 A50-1 142 x 426 x 224 3 4 12 304080 A50-1 142 x 426 x 279 3 5 15 304036 A50-1 142 x 565 x 169 4 3 12 304002 A50-1 142 x 565 x 224 4 4 16 304081 A50-1 142 x 565 x 279 4 5 20 304030 A50-1 142 x 705 x 169 5 3 15 304010 A50-1 142 x 705 x 224 5 4 20 304003 A75-1 142 x 426 x 164 3 2 6 304028 A75-1 142 x 426 x 244 3 3 9 304004 A75-1 142 x 565 x 164 4 2 8 304029 A75-1 142 x 565 x 244 4 3 12 304033 A75-1 142 x 705 x 164 5 2 10 304005 A100-1 142 x 426 x 214 3 2 6 304006 A100-1 142 x 565 x 214 4 2 8 304025 A50-1 or 142 x 426 x 224 3 4 12 (A100-1) or [A32-1] (3) [3] (2) [6] (6) [18] 304007 A50-1 or 142 x 565 x 224 4 4 16 (A100-1) or [A32-1] (4) [4] (2) [6] (8) [24] Special sizes on request! Reg. No. ALPHA2-DB-GB-300305 All rights and changes reserved. 2005 Copyright by National Lab Printed in Germany. 2
National Lab BRAVO-Box 133x133 square Storage and Cryo Boxes BRAVO-Box square 133 x 133 BRAVO-Box 133 x 133 square Storage and Cryo Boxes Water-repellent fiberboard boxes suitable for ultra-low temperatures. With lid. External dimensions 133 x 133 mm. Height = inner height. Quality >>special<< with additional water-proof coating made of plastic. Height 32mm Height 50mm Height 75 mm Height 100 mm Height Type B32-1 Type B50-1 Type B75-1 Type B100-1 Type B130-1 Colour WHITE standard 301021WE-1 301022WE-1 301023WE-1 301024WE-1 301032WE-1 spezial 301021WE-2 301022WE-2 301023WE-2 301024WE-2 301032WE-2 YELLOW standard 301021GE-1 301022GE-1 301023GE-1 301024GE-1 301032GE-1 spezial 301021GE-2 301022GE-2 301023GE-2 301024GE-2 301032GE-2 BLUE standard 301021BL-1 301022BL-1 301023BL-1 301024BL-1 301032BL-1 spezial 301021BL-2 301022BL-2 301023BL-2 301024BL-2 301032BL-2 GREEN standard 301021GR-1 301022GR-1 301023GR-1 301024GR-1 331032GR-1 spezial 301021GR-2 301022GR-2 301023GR-2 301024GR-2 301032GR-2 RED standard 301021RO-1 301022RO-1 301023RO-1 301024RO-1 301032RO-1 spezial 301021RO-2 301022RO-2 301023RO-2 301024RO-2 301032RO-2 Grid Dividers for National Lab BRAVO-Box Fiberboard Boxes 14x14 cells for. Height 25 mm Height 30 mm Height 40 mm Height 65 mm vials up to 7.0 mm.302036-25 302036-30 302036-40 302036-65 13x13 cells for. vials up to 8.0 mm.302035-25 302035-30 302035-40 302035-65 12x12 cells for. vials up to 9.0 mm.302029-25 302029-30 302029-40 302029-65 10x10 cells for. vials up to 12.0 mm.302021-25 302021-30 302021-40 302021-65 9x9 cells for. vials up to 13.0 mm.302022-25 302022-30 302022-40 302022-65 8x8 cells for. vials up to 14.0 mm.302023-25 302023-30 302023-40 302023-65 7x7 cells for. vials up to 16.0 mm.302024-25 302024-30 302024-40 302024-65 6x6 cells for. vials up to 19.0mm.302025-25 302025-30 302025-40 302025-65 5x5 cells for. vials up to 23.0 mm.302026-25 302026-30 302026-40 302026-65 4x4 cells for. vials up to 30.0 mm.302027-25 302027-30 302027-40 302027-65 Special sizes on request! Reg. No. BRAVO1-DB-GB-300305 All rights and changes reserved. 2005 Copyright by National Lab Printed in Germany. 3
National Lab Stainless Steel Vertical and Horizontal Racks for BRAVO-Box Cryo Boxes National Lab Stainless Steel Vertical Racks for BRAVO-Box Cryo Boxes (square). With Handle. Type of Dimensions No. of Box WxF-BxH (mm) Boxes For all brands 303160-7 B32-1 138 x 138 x 265 7 303160-8 B32-1 138 x 138 x 302 8 303160-9 B32-1 138 x 138 x 339 9 303160-10 B32-1 138 x 138 x 376 10 303160-11 B32-1 138 x 138 x 413 11 303160-12 B32-1 138 x 138 x 450 12 303160-13 B32-1 138 x 138 x 487 13 303160-14 B32-1 138 x 138 x 524 14 303160-15 B32-1 138 x 138 x 561 15 303160-16 B32-1 138 x 138 x 598 16 303160-17 B32-1 138 x 138 x 635 17 303160-18 B32-1 138 x 138 x 672 18 303160-19 B32-1 138 x 138 x 709 19 303160-20 B32-1 138 x 138 x 746 20 303163-4 B50-1 138 x 138 x 226 4 303163-5 B50-1 138 x 138 x 281 5 303163-6 B50-1 138 x 138 x 336 6 303163-7 B50-1 138 x 138 x 391 7 303163-8 B50-1 138 x 138 x 446 8 303163-9 B50-1 138 x 138 x 501 9 303163-10 B50-1 138 x 138 x 556 10 303163-11 B50-1 138 x 138 x 611 11 303163-12 B50-1 138 x 138 x 666 12 303163-13 B50-1 138 x 138 x 721 13 303163-14 B50-1 138 x 138 x 776 14 303164-4 B75-1 138 x 138 x 326 4 303164-5 B75-1 138 x 138 x 406 5 303164-6 B75-1 138 x 138 x 486 6 303164-7 B75-1 138 x 138 x 566 7 303164-8 B75-1 138 x 138 x 646 8 303164-9 B75-1 138 x 138 x 726 9 303164-10 B75-1 138 x 138 x 806 10 303165-3 B100-1 138 x 138 x 321 3 303165-4 B100-1 138 x 138 x 426 4 303165-5 B100-1 138 x 138 x 531 5 303165-6 B100-1 138 x 138 x 636 6 303165-7 B100-1 138 x 138 x 741 7 303168-3 B130-1 138 x 138 x 411 3 303168-4 B130-1 138 x 138 x 546 4 303168-5 B130-1 138 x 138 x 681 5 National Lab Stainless Steel Horizontal Racks for BRAVO-Box Cryo Boxes (square). With Handle. For all brands Type of Dimensions No. of Boxes Box WxF-BxH (mm) Forward-Back Height Total 304121-35 B32-1 139 x 414 x 189 3 5 15 304121-36 B32-1 139 x 414 x 226 3 6 18 304121-37 B32-1 139 x 414 x 263 3 7 21 304121-45 B32-1 139 x 549 x 189 4 5 20 304121-46 B32-1 139 x 549 x 226 4 6 24 304121-47 B32-1 139 x 549 x 263 4 7 28 304124-24 B50-1 139 x 278 x 224 2 4 8 304124-25 B50-1 139 x 278 x 279 2 5 10 304124-33 B50-1 139 x 414 x 169 3 3 9 304124-34 B50-1 139 x 414 x 224 3 4 12 304124-35 B50-1 139 x 414 x 279 3 5 15 304124-43 B50-1 139 x 549 x 169 4 3 12 304124-44 B50-1 139 x 549 x 224 4 4 16 304124-45 B50-1 139 x 549 x 279 4 5 20 304124-53 B50-1 139 x 685 x 169 5 3 15 304124-54 B50-1 139 x 685 x 224 5 4 20 304125-32 B75-1 139 x 414 x 164 3 2 6 304125-33 B75-1 139 x 414 x 244 3 3 9 304125-42 B75-1 139 x 549 x 164 4 2 8 304125-43 B75-1 139 x 549 x 244 4 3 12 304125-52 B75-1 139 x 685 x 164 5 2 10 304126-32 B100-1 139 x 414 x 214 3 2 6 304126-42 B100-1 139 x 549 x 214 4 2 8 304124-34A B50-1 or (B75-1) 139 x 414 x 244 3 (3) 4 (2) 12 (9) 304124-44A B50-1 or (B75-1) 139 x 549 x 244 4 (4) 4 (3) 16 (12) 304124-34B B50-1 or (B75-1) 139 x 414 x 224 3 4 12 (B100-1) or [B32-1] (3) [3] (2) [6] (6) [18] 304124-44B B50-1 or 139 x 549 x 224 4 4 16 (B100-1) or [B32-1] (4) [4] (2) [6] (8) [24] Special sizes on request! Reg. No. BRAVO2-DB-GB-300305 All rights and changes reserved. 2005 Copyright by National Lab Printed in Germany. 4
National Lab EPPI-Box A Storage and Cryo Boxes EPPI-Box A EPPI-Box A Storage and Cryo Boxes Water-repellent fiberboard boxes suitable for ultra-low temperatures. With lid. External dimensions 136 x 136 mm. Height = inner height. Quality >>special<< with additional water-proof coating made of plastic. 0.2 ml 0.5 ml + 0.75 ml 1.5 ml + 2.0 ml 1.5 ml + 2.0 ml EPPI-PCR A 0,2 EPPI-Mini A 0,5 EPPI-Basic A 1,5 EPPI-Maxi A 1,5 16 X 16 Cells 13 X 13 Cells 10 X 10 Cells 10 X 10 Cells (136 x 136 x 25 mm) (136 x 136 x 32 mm) (136 x 136 x 50 mm) (140 x 140 x 50 mm) Colour WHITE standard 301115WE-1 301016WE-1 301100WE-1 301014WE-1 special 301115WE-2 301016WE-2 301100WE-2 301014WE-2 YELLOW standard 301115GE-1 301016GE-1 301100GE-1 301014GE-1 special 301115GE-2 301016GE-2 301100GE-2 301014GE-2 BLUE standard 301115BL-1 301016BL-1 301100BL-1 301014BL-1 special 301115BL-2 301016BL-2 301100BL-2 301014BL-2 GREEN standard 301115GR-1 301016GR-1 301100GR-1 301014GR-1 special 301115GR-2 301016GR-2 301100GR-2 301014GR-2 RED standard 301115RO-1 301016RO-1 301100RO-1 301014RO-1 special 301115RO-2 301016RO-2 301100RO-2 301014RO-2 0.2 ml 0.5 ml + 0.75 ml 1.5 ml + 2.0 ml 1.5 ml + 2.0 ml EPPI-PCR A 0,2»long«EPPI-Mini A 0,5»long«EPPI-Basic A 1,5»long«EPPI-Maxi A 1,5»long«16 X 32 Cells 13 X 26 Cells 10 X 20 Cells 10 X 20 Cells (136 x 268 x 25 mm) (136 x 268 x 32 mm) (136 x 268 x 50 mm) (140 x 276 x 50 mm) Colour WHITE standard 301115LWE-1 301016LWE-1 301100LWE-1 301014LWE-1 special 301115LWE-2 301016LWE-2 301100LWE-2 301014LWE-2 YELLOW standard 301115LGE-1 301016LGE-1 301100LGE-1 301014LGE-1 special 301115LGE-2 301016LGE-2 301100LGE-2 301014LGE-2 BLUE standard 301115LBL-1 301016LBL-1 301100LBL-1 301014LBL-1 special 301115LBL-2 301016LBL-2 301100LBL-2 301014LBL-2 GREEN standard 301115LGR-1 301016LGR-1 301100LGR-1 301014LGR-1 special 301115LGR-2 301016LGR-2 301100LGR-2 301014LGR-2 RED standard 301115LRO-1 301016LRO-1 301100LRO-1 301014LRO-1 special 301115LRO-2 301016LRO-2 301100LRO-2 301014LRO-2 Special sizes on request! Reg. No. EPPI1-DB-GB-300305 All rights and changes reserved. 2005 Copyright by National Lab Printed in Germany. 5
National Lab Stainless Steel Vertical and Horizontal Racks for EPPI-Box A Cryo Boxes National Lab Stainless Steel Vertical Racks for EPPI-Box A Cryo Boxes. With Handle. Type of Box Dimensions No. of WxF-BxH (mm) Boxes Type of Box Dimensions No. of WxF-BxH (mm) Boxes 303145-8 141x141x246 8 303130 141x141x265 7 303145-9 141x141x276 9 303131 141x141x302 8 303145-10 141x141x306 10 303132 141x141x339 9 303145-11 141x141x336 11 303133 141x141x376 10 303145-12 141x141x366 12 303134 141x141x413 11 303145-13 141x141x396 13 303135 141x141x450 12 303145-14 141x141x426 14 303136 141x141x487 13 303145-15 141x141x456 15 303137 141x141x524 14 303145-16 141x141x486 16 303138 141x141x561 15 303145-17 141x141x516 17 303139 141x141x598 16 303145-18 141x141x546 18 303140 141x141x635 17 303145-19 141x141x576 19 303141 141x141x672 18 303145-20 141x141x606 20 303142 141x141x709 19 303145-21 141x141x636 21 303143 141x141x746 20 303145-22 141x141x666 22 303145-23 141x141x696 23 303145-24 141x141x726 24 303145-25 141x141x756 25 - EPPI-PCR A0,2 - - EPPi-Mini A 0,5 - For all brands 303061 141x141x226 4 303076-4 147x147x226 4 303062 141x141x281 5 303076-5 147x147x281 5 303001 141x141x336 6 303076-6 147x147x336 6 303002 141x141x391 7 303076-7 147x147x391 7 303003 141x141x446 8 303076-8 147x147x446 8 303057 141x141x501 9 303076-9 147x147x501 9 303004 141x141x556 10 303076-10 147x147x556 10 303005 141x141x611 11 303076-11 147x147x611 11 303058 141x141x666 12 303076-12 147x147x666 12 303059 141x141x721 13 303076-13 147x147x721 13 303060 141x141x776 14 303076-14 147x147x776 14 - EPPi-Basic A 1,5 - - EPPi-Maxi A 1,5 - National Lab Stainless Steel Horizontal Racks for EPPI-Box A Cryo Boxes. With Handle. For all brands Type of Box 304179-27 142x286x214 2 7 14 304180-27 142x286x263 2 7 14 304179-29 142x286x274 2 9 18 304180-35 142x426x189 3 5 15 304179-37 142x426x214 3 7 21 304180-36 142x426x226 3 6 18 304179-38 142x426x244 3 8 24 304180-37 142x426x263 3 7 21 304179-39 142x426x274 3 9 27 304180-45 142x565x189 4 5 20 304179-30 142x426x304 3 10 30 304180-46 142x565x226 4 6 24 304179-47 142x565x214 4 7 28 304180-47 142x565x263 4 7 28 304179-48 142x565x244 4 8 32 304180-56 142x705x226 5 6 30 304179-49 142x565x274 4 9 36 304180-57 142x705x263 5 7 35 304179-40 142x565x304 4 10 40 304179-58 142x705x244 5 8 40 304179-59 142x705x274 5 9 45 - EPPI-PCR A0,2-304018 142x286x224 2 4 8 304185-24 148x298x224 2 4 8 304019 142x286x279 2 5 10 304185-25 148x298x279 2 5 10 304017 142x426x169 3 3 9 304185-33 148x444x169 3 3 9 304001 142x426x224 3 4 12 304185-34 148x444x224 3 4 12 304080 142x426x279 3 5 15 304185-35 148x444x279 3 5 15 304036 142x565x169 4 3 12 304185-43 148x589x169 4 3 12 304002 142x565x224 4 4 16 304185-44 148x589x224 4 4 16 304081 142x565x279 4 5 20 304185-45 148x589x279 4 5 20 304030 142x705x169 5 3 15 304185-53 148x735x169 5 3 15 304010 142x705x224 5 4 20 304185-54 148x735x224 5 4 20 - EPPi-Basic A 1,5 - Dimensions No. of Boxes WxF-BxH (mm) F-B Height Total Type of Dimensions Box WxF-BxH (mm) No. of Boxes F-B Height Total 304177-34 EPPi-Basic or 142x426x236 3 4 12 EPPi-Mini A 0,5 or 3 6 18 EPPi-PCR A 0,2 3 8 24 304177-44 EPPi-Basic or 142x565x236 4 4 16 EPPi-Mini A 0,5 or 4 6 24 EPPi-PCR A 0,2 4 8 32 304025 EPPi-Basic or 142x426x224 3 4 12 EPPi-Mini A 0,5 3 6 18 304007 EPPi-Basic or 142x565x224 4 4 16 EPPi-Mini A 0,5 4 6 24. Special sizes on request! Reg. No. EPPI2-DB-GB-300305 All rights and changes reserved. 2005 Copyright by National Lab - EPPi-Maxi A 1,5 - - EPPi-Mini A 0,5 - Printed in Germany. 6
National Lab Cellbox Cell Culture Storage and Cryo Boxes for 15 ml and 50 ml Tubes CellBox 15 ml + 50 ml Cellbox Cell Culture Storage and Cryo Boxes for 15 ml and 50 ml Tubes Water-repellent fiberboard boxes suitable for ultra-low temperatures. With lid and grid divider already put in. Usefull for all tubes up to ca. 22 mm (15 ml) or 34 mm (50 ml) diameter and 125 mm maximum length. Dimensions = External dimensions incl. lid. Quality >>special<< with additional water-proof coating. 15 ml 50 ml CellBox-Mini CellBox-Maxi CellBox-Mini CellBox-Maxi 5 X 5 Cells 6 X 6 Cells 3 X 3 Cells 4 X 4 Cells (122 x 122 x 128 mm) (148 x 148 x 128 mm) (122 x 122 x 128 mm) (148 x 148 x 128 mm) Colour WHITE standard 301017WE-1 301019WE-1 301018WE-1 301020WE-1 special 301017WE-2 301019WE-2 301018WE-2 301020WE-2 YELLOW standard 301017GE-1 301019GE-1 301018GE-1 301020GE-1 special 301017GE-2 301019GE-2 301018GE-2 301020GE-2 BLUE standard 301017BL-1 301019BL-1 301018BL-1 301020BL-1 special 301017BL-2 301019BL-2 301018BL-2 301020BL-2 GREEN standard 301017GR-1 301019GR-1 301018GR-1 301020GR-1 special 301017GR-2 301019GR-2 301018GR-2 301020GR-2 RED standard 301017RO-1 301019RO-1 301018RO-1 301020RO-1 special 301017RO-2 301019RO-2 301018RO-2 301020RO-2 15 ml 50 ml CellBox-Mini»long«CellBox-Maxi»long«CellBox-Mini»long«CellBox-Maxi»long«5 X 10 Cells 6 X 12 Cells 3 X 6 Cells 4 X 8 Cells (122 x 240 x 128 mm) (148 x 291 x 128 mm) (122 x 240 x 128 mm) (148 x 291 x 128 mm) Colour WHITE standard 301140WE-1 301142WE-1 301141WE-1 301143WE-1 special 301140WE-2 301142WE-2 301141WE-2 301143WE-2 YELLOW standard 301140GE-1 301142GE-1 301141GE-1 301143GE-1 special 301140GE-2 301142GE-2 301141GE-2 301143GE-2 BLUE standard 301140BL-1 301142BL-1 301141BL-1 301143BL-1 special 301140BL-2 301142BL-2 301141BL-2 301143BL-2 GREEN standard 301140GR-1 301142GR-1 301141GR-1 301143GR-1 special 301140GR-2 301142GR-2 301141GR-2 301143GR-2 RED standard 301140RO-1 301142RO-1 301141RO-1 301143RO-1 special 301140RO-2 301142RO-2 301141RO-2 301143RO-2 Special sizes on request! Reg. No. CELL1-DB-GB-300305 All rights and changes reserved. 2005 Copyright by National Lab Printed in Germany. 7