COAX coax 07/207 www.dockweiler.com
Coaxial Tube System Doppelwandrohr-system Installation instructions for the coaxial Tube system Installationshinweise für das Doppelwandrohr-System coaxial tube SYStem Doppelwandrohr-system Tube to tube or tube to fitting Rohr an Rohr oder Rohr an Formteil The special twin wall tube system consists of an inner process tube and an outer safety tube. Both are prepared for orbital welding and manufactured from high quality stainless steel AISI 6L or 04L acc. to customer specification (the tube is also available in other alloys on demand). Das Doppelwandrohr-System von Dockweiler, bestehend aus einem inneren Prozess- und einem äußeren, garantiert den sicheren Transport von explosiven, toxischen und korrosiven Medien. Beide Rohre sind zum Orbitalschweißen vorbereitet und aus Edelstahl AISI 6L oder 04L hergestellt (andere Werkstoffe auf Anfrage). Inner tube / process tube 2 Spacers centre the process tube and safeguard the gas flow between the outer and the inner tube. In case of a leak in the process tube the escaping medium flows into the safety space and can be neutralised and harmlessly discharged from the system. The coaxial tube system is easy to install by orbital welding and can also be integrated existing systems and plants. Abstandshalter zentrieren das und gewährleisten einen sicheren Durchfluss zwischen dem inneren und dem äußeren Rohr. Bei einer auftretenden Undichtigkeit im strömt das austretende Medium in den Sicherheitsraum und kann hier unschädlich gemacht und abgeleitet werden. Alle Rohre und Formteile des Doppelwandrohr-Systems von Dockweiler sind problemlos orbitalverschweißbar. Das ermöglicht eine einfache Nachrüstung auch in bereits bestehende Anlagen und Einrichtungen. Tube A Rohr A Tube B Rohr B Orbital weld the process tube and helium leak test Orbitalschweißung des es, mit anschließendem Helium-Leck-Test Tube A Rohr A Tube B Rohr B - Slide the inner safety tubes together so that the weld on the inner process tube is covered - Orbital weld the outer tube and helium leak test - Zusaenschieben der äußeren e, so dass die Naht des es verdeckt wird - Orbitalschweißung des es mit anschließendem Helium- Leck-Test Closing the outer safety tube abschluss des Schutzrohres Process gas Prozessgas 2 Closing piece Endstück Orbital weld the closing piece to the process tube Orbitalschweißung des Endstückes auf das Process gas Prozessgas Fitting to fitting Formteil an Formteil 2 Sleeve Hülse Process gas Prozessgas Inert gas / Vacuum Inertgas / Vakuum Sleeve Hülse Orbital weld the process tube Orbitalschweißung des es A sleeve is slid over both ends of the safety tube and orbital welded Eine Hülse wird über beide Rohrenden des es geschoben und orbital verschweißt www.dockweiler.com 07/207 07/207 www.dockweiler.com
d s s l4 d l Coax Tubes COAX Rohre Coax T-Pieces COAX T-Stücke d4 s4 d s l max. permissible design pressure / max. zul. Betriebsdruck* d s Weight / Gewicht kg/m 6,5 0,89 2,70,24 0,4752 / 8 9,5 0,89 5,88,24 0,652 2,70,24 9,05,65,0709 9,05,65 25,40,65,7022 25,40,65 8,0,65 2,490 * temp. 20 to 50 C; static loading; rating depends on outer tube; for detailed information (e.g. rating of inner tube) please see pressure tables in section Technical Information * temp. 20 bis 50 C; vorw. ruhende Beanspruchung; Angabe gilt für ; detaillierte Informationen (z. B. Angaben für das ) finden Sie in den ausführlichen Drucktabellen im Abschnitt Technische Informationen Main Tube / Durchgang Branch / Abzweig Main Tube / Durchgang Branch / Abzweig d s d s d4 s4 l l l4 x 6,5 0,89 6,5 0,89 2,70,24 2,70,24 27,00 88,90 6,50 44,45 / 8 x 9,5 0,89 6,5 0,89 5,88,24 2,70,24 27,00 88,90 6,50 44,45 / 8 x / 8 9,5 0,89 9,5 0,89 5,88,24 5,88,24 27,00 88,90 6,50 44,45 x 2,70,24 6,5 0,89 9,05,65 2,70,24,5 95,25 66,68 47,6 x / 8 2,70,24 9,5 0,89 9,05,65 5,88,24,5 95,25 66,68 47,6 x 2,70,24 2,70,24 9,05,65 9,05,65,5 95,25 66,68 47,6 x 9,05,65 6,5 0,89 25,40,65 2,70,24,5 95,25 66,68 47,6 x / 8 9,05,65 9,5 0,89 25,40,65 5,88,24,5 95,25 66,68 47,6 x 9,05,65 2,70,24 25,40,65 9,05,65,5 95,25 66,68 47,6 x 9,05,65 9,05,65 25,40,65 25,40,65,5 95,25 66,68 47,6 x 25,40,65 6,5 0,89 8,0,65 2,70,24 58,75 07,95 79,8 5,98 x / 8 25,40,65 9,5 0,89 8,0,65 5,88,24 58,75 07,95 79,8 5,98 x 25,40,65 2,70,24 8,0,65 9,05,65 58,75 07,95 79,8 5,98 x 25,40,65 9,05,65 8,0,65 25,40,65 58,75 07,95 79,8 5,98 x 25,40,65 25,40,65 8,0,65 8,0,65 58,75 07,95 79,8 5,98 www.dockweiler.com 07/207 07/207 www.dockweiler.com
l l l MR d s d Coax Elbows 45 and 90 COAX Bögen 45 und 90 Coax Sleeves and Terminators COAX Hülsen und Endstücke MR l s d Dimensions / Baumaße d s l MR 6,5 0,89 2,70,24 98,45 79,40 8,0 bended / gebogen / 8 9,5 0,89 5,88,24 98,45 79,40 57,00 bended / gebogen 2,70,24 9,05,65 09,26 90,2 85,00 bended / gebogen 9,05,65 25,40,65 5,6 0,2 85,00 bended / gebogen 25,40,65 8,0,65 88,90 6,50 8,0 welded / geschweißt Process Tube / Sleeve / Hülse d d d l 6,5 2,70 2,90 5,88 0,60 / 8 9,5 5,88 6, 9,05 0,60 2,70 9,05 9,0 22,2 0,60 9,05 25,40 25,60 0,00 0,60 25,40 8,0 8,40 42,40 0,60 s d l l Dimensions / Baumaße d s l MR 6,5 0,89 2,70,24 20,70 0,65 8,0 bended / gebogen / 8 9,5 0,89 5,88,24 0,70,65 57,00 bended / gebogen 2,70,24 9,05,65 84,40 65,5 85,00 bended / gebogen 9,05,65 25,40,65 90,75 65,5 85,00 bended / gebogen 25,40,65 8,0,65 07,97 82,57 8,0 welded / geschweißt Dimensions / Baumaße d l 6,5 2,70 25,40 / 8 9,5 5,88 25,40 2,70 9,05 25,40 9,05 25,40,75 25,40 8,0,75 www.dockweiler.com 07/207 07/207 www.dockweiler.com
d d4 d s d s l l Coax Purge Tees COAX Purge tees Coax Bulkhead Purge Tees COAX Bulkhead Purge tees d l4 d5 l l d s l l d * Trademark 6,5 0,89 2,70,24 46,00 7,00,0 / 8 9,5 0,89 5,88,24 52,40 76,20 4,80 2,70,24 9,05,65 52,40 76,20 6,40 9,05,65 25,40,65 65,0 82,55 9,60 25,40,65 8,0,65 65,0 82,55 45,85 VCR* d s l l l4 Main tube / Durchgangsrohr VCR* Size / Kopfgröße Branch / Abzweig VCR* tube size / Stutzen-Rohranschl. VCR* Size / Kopfgröße Straight thread size / Gewindeabmessung d d5 d4 6,5 0,89 2,70,24 242,90 44,50,5 55,00 M20 x,5 / 8 9,5 0,89 5,88,24 256,20 54,60 4,80 5,40 M0x 2 2,70,24 9,05,65 256,20 54,60 6,40 5,40 M0x 2 * Trademark (Wall aperture / Wandöffnung) www.dockweiler.com 07/207 07/207 www.dockweiler.com
s d d s d d Coax VCR Female / Male Glands COAX Endstücke mit VCR l Male l Female Dimensions / Baumaße VCR* Size / Kopfgröße d s l d 6,5 0,89 2,70,24 88,90 9,05 / 8 9,5 0,89 5,88,24 88,90 9,05 2,70,24 9,05,65 88,90 9,05 * Trademark 9,05,65 25,40,65 9,70 25,40 25,40,65 8,0,65 9,70 25,40 www.dockweiler.com 07/207