Golden DRAGONPlus warm white with Chip Level Conversion (CLC) Lead (Pb) Free Product - RoHS Compliant

Golden DRAGONPlus warm white with Chip Level Conversion (CLC) Lead (Pb) Free Product - RoHS Compliant LCW W5AM Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusetyp: weißes SMD Gehäuse, klarer Silikon - Verguss, klare Silikonlinse, Chip level conversion Typischer Lichtstrom: 79 lm bei 35 ma bis zu 178 lm bei 1 A (35K) Besonderheit des Bauteils: hocheffiziente Lichtquelle bei geringem Platzbedarf Farbtemperatur: 25 K bis 48 K Farbwiedergabeindex: 8 Abstrahlwinkel: 17 Technologie: ThinGaN optischer Wirkungsgrad: 68 lm/w bei 35 K Gruppierungsparameter: Lichtstrom, Farbort Verarbeitungsmethode: für alle SMT-Bestücktechniken geeignet Lötmethode: Reflow Löten Vorbehandlung: nach JEDEC Level 4 Gurtung: 24-mm Gurt mit 2/Rolle, ø18 mm ESD-Festigkeit: ESD-sicher bis 2 kv nach JESD22-A114-D Features package: white SMD package, colorless clear silicone resin, clear silicone lens, chip level conversion typical Luminous Flux: 79 lm at 35 ma up to 178 lm at 1 A (35 K) feature of the device: high efficient lightsource at low space color temperature: 25 K to 48 K color reproduction index: 8 viewing angle: 17 technology: ThinGaN optical efficiency: 68 lm/w at 35 K grouping parameter: luminous flux, color coordinates assembly methods: suitable for all SMT assembly methods soldering methods: reflow soldering preconditioning: acc. to JEDEC Level 4 taping: 24 mm tape with 2/reel, ø18 mm ESD-withstand voltage: up to 2 kv acc. to JESD22-A114-D Anwendungen Raumbeleuchtung: Deckenbeleuchtung, Nischenbeleuchtung, Kronleuchter, Hängeleuchten, Wandleuchter Flutlicht Effekt- und Akzentbeleuchtung: Vitrinen, Möbelbeleuchtung, Markierungsbeleuchtung Spezialbeleuchtung: Blitzlicht, Radbeleuchtung, Sicherheitsbeleuchtung Gebäudebeleuchtung: Fassadenbeleuchtung, Treppenbeleuchtung Leselampen Applications room lighting: ceiling light, cove lighting, chandeliers, pendants, sconces flood light effect and accent lighting: display cases, furniture illumination, marker lights specialty lighting: flashlight, bicycle headlamps, security lights architectural lighting: facade lighting, stairway lighting reading lamps 29-1-29 1

Bestellinformation Ordering Information Typ Farbtemperatur 1) Seite 23 Lichtstrom Lichtstärke 2) Seite 23 Bestellnummer Type color temperature Luminous 1) page 23 Flux Luminous Intensity 2) page 23 Ordering Code I F = 35 ma Φ V (mlm) I F = 35 ma I V (mcd) LCW W5AM-JZKY-4U9X 27 K 61.... 97. 19.8 (typ.) Q6511A9535 LCW W5AM-JZKY-4R9T LCW W5AM-KXKY-4R9T 3 K 61.... 97. 71.... 97. 19.8 (typ.) 21. (typ.) Q6511A816 Q6511A8169 LCW W5AM-JZKZ-4O9Q 35 K 61.... 112. 21.65 (typ.) Q6511A9536 LCW W5AM-KXKZ-4L8N LCW W5AM-KYKZ-4L8N 4 K 71.... 112. 82.... 112. 22.8 (typ.) 26.15 (typ.) Q6511A761 Q6511A8828 LCW W5AM-KXKZ-4J8K 45 K 71.... 112. 22.8 (typ.) Q6511A8986 Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 11 für nähere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Gurt geliefert. Z.B.: LCW W5AM-JZKY-4U9X bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen JZ, KX oder KY enthalten ist. Um die Liefersicherheit zu gewährleisten, können einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt für die Farben, bei denen Farbortgruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Farbortgruppe geliefert. Z.B.: LCW W5AM-JZKY-4U9X bedeutet, dass auf dem Gurt nur eine der Farbortgruppen 4U bis 9X enthalten ist (siehe Seite 6 für nähere Information). Um die Liefersicherheit zu gewährleisten, können einzelne Farbortgruppen nicht bestellt werden. Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 11 for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). E.g. LCW W5AM-JZKY-4U9X means that only one group JZ, KX or KY will be shippable for any one reel. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where chromaticity coordinate groups are measured and binned, single chromaticity coordinate groups will be shipped on any one reel. E.g. LCW W5AM-JZKY-4U9X means that only 1 chromaticity coordinate group 4U to 9X will be shippable on each reel (see page 6 for explanation). In order to ensure availability, single chromaticity coordinate groups will not be orderable. 29-1-29 2

Vergleichstabelle Correlation Table Typ Type Farbtemperatur 1) Seite 23 Lichtstrom 1) page 23 Luminous Flux Typischer 2) Seite 23 Lichtstrom Typical Luminous 2) page 23 Flux color temperature I F = 35 ma Φ V (mlm) I F = 5 ma Φ V (mlm) LCW W5AM-JZKY-4U9X 27 K 61.... 97. 11.6 LCW W5AM-JZKY-4R9T 3 K 61.... 97. 11.6 LCW W5AM-JZKZ-4O9Q 35 K 61.... 112. 121.1 LCW W5AM-KXKZ-4L8N 4 K 71.... 112. 128.1 LCW W5AM-KXKZ-4J8K 45 K 71.... 112. 128.1 29-1-29 3

Grenzwerte Maximum Ratings Bezeichnung Parameter Betriebstemperatur Operating temperature range Lagertemperatur Storage temperature range Sperrschichttemperatur Junction temperature Durchlassstrom Forward current (T A =25 C) Stoßstrom Surge current t 1 μs, D =.5, T A =25 C Sperrspannung Reverse voltage (T A =25 C) Leistungsaufnahme Power consumption (T A =25 C) (min.) (max.) Symbol Symbol Wert Value T op 4 + 11 C T stg 4 + 11 C T j 125 C I F I F 1 1 Einheit Unit ma ma I FM 2 ma V R not designed for reverse operation P tot 4. W V 29-1-29 4

Kennwerte Characteristics (T A = 25 C) Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit 3) Seite 23 Farbkoordinate x nach CIE 1931 (typ.) x.42 3) page 23 Chromaticity coordinate x acc. to CIE 1931 I F = 35 ma 3) Seite 23 Farbkoordinate y nach CIE 1931 (typ.) y.4 3) page 23 Chromaticity coordinate y acc. to CIE 1931 I F = 35 ma 2) Seite 23) Farbtemperatur (min.) 2) page 23 Color temperature T T 25 K K I F = 35 ma (max.) T 48 K Abstrahlwinkel bei 5 % Ι V (Vollwinkel) (typ.) 2ϕ 17 Grad Viewing angle at 5 % Ι V deg. 4) Seite 23) Durchlassspannung (min.) V F 2.7 V 4) page 23 Forward voltage (typ.) V F 3.2 V I F = 35 ma (max.) V F 3.7 V Sperrstrom Reverse current (max.) I R not designed for reverse operation μa Optischer Wirkungsgrad Optical efficiency I F = 35 ma, T C = 35 K Wärmewiderstand Thermal resistance Sperrschicht/Lötpad Junction/soldering point *R th (max) basiert auf statistischen Werten R th (max) is based on statistic values (typ.) (typ.) (max.) η opt 68 lm/w R th JS 6.5 R th JS 11* K/W K/W 29-1-29 5

3) Seite 21 Farbortgruppen 3) page 21 Chromaticity Coordinate s Cy.9.8.7.6.5.4.3.2.1 52 51 5 49 53 48 47 46 45 54 55 E 56 57 58 59 6 61 62 63.1.2.3.4.5.6.7.8.9 Cx Cy.54.52.5.48.46.44.42.4.38.36.34.32.3.28.26.24.34 45 K 4 8 U V W X J K L M N O P Q R S T 7 6 5 4.36 4 K.38.4 35 K.42 27 K 3 K 9 8.44.46 6 5 7.48 Cx.5 OHA3621 29-1-29 6

Farbtemperatur 27 K Color temperature 27K Gruppe Cx Cy Gruppe Cx Cy Gruppe Cx Cy 4U.433.38 6V.448.4 8W.464.42.437.389.453.49.469.429.443.391.459.41.475.43.438.381.453.41.47.421 5U.437.389 7V.453.49 9W.469.429.442.398.458.418.474.438.448.4.464.42.48.44.443.391.459.41.475.43 6U.442.398 8V.458.418 4X.448.384.447.48.462.427.454.393.453.49.469.429.459.394.448.4.464.42.454.385 7U.447.48 9V.462.427 5X.454.393.451.417.467.437.459.42.458.418.474.438.465.44.453.49.469.429.459.394 8U.451.417 4W.443.383 6X.459.42.456.426.448.392.464.412.462.427.454.393.47.413.458.418.448.384.465.44 9U.456.426 5W.448.392 7X.464.412.461.435.453.41.47.421.467.437.459.42.476.423.462.427.454.393.47.413 4V.438.381 6W.453.41 8X.47.421.443.391.459.41.475.43.448.392.464.412.481.432.443.383.459.42.476.423 5V.443.391 7W.459.41 9X.475.43.448.4.464.42.48.44.453.41.47.421.487.441.448.392.464.412.481.432 29-1-29 7

Farbtemperatur 3 K Color temperature 3 K Gruppe Cx Cy Gruppe Cx Cy Gruppe Cx Cy 4R.411.373 4S.418.375 4T.425.378.415.381.422.384.43.387.422.384.43.387.437.389.418.375.425.378.433.38 5R.415.381 5S.422.384 5T.43.387.419.39.426.393.434.396.426.393.434.396.442.398.422.384.43.387.437.389 6R.419.39 6S.426.393 6T.434.396.422.399.43.42.439.45.43.42.439.45.447.48.426.293.434.396.442.398 7R.422.399 7S.43.42 7T.439.45.426.48.435.411.443.414.435.411.443.414.451.417.43.42.439.45.447.48 8R.426.48 8S.435.411 8T.443.414.43.417.439.42.447.423.439.42.447.423.456.426.435.411.443.414.451.417 9R.43.417 9S.439.42 9T.447.423.434.425.443.429.452.432.443.429.452.432.461.435.439.42.447.423.456.426 29-1-29 8

Farbtemperatur 35 K Color temperature 35 K Gruppe Cx Cy Gruppe Cx Cy Gruppe Cx Cy 4O.386.361 4P.394.365 4Q.43.369.389.369.398.373.46.377.398.373.46.377.415.381.394.365.43.369.411.373 5O.389.369 5P.398.373 5Q.46.377.392.377.41.381.41.386.41.381.41.386.419.39.398.373.46.377.415.381 6O.392.377 6P.41.381 6Q.41.386.394.385.44.39.413.394.44.39.413.394.422.399.41.381.41.386.419.39 7O.394.385 7P.44.39 7Q.413.394.397.393.47.398.416.43.47.398.416.43.426.48.44.39.413.394.422.399 8O.397.393 8P.47.398 8Q.416.43.4.41.41.46.42.412.41.48.42.412.43.417.47.398 416.43.426.48 9O.4.41 9P.41.46 9Q.42.412.42.41.413.415.423.42.413.415.423.42.434.425.41.46.42.412.43.417 29-1-29 9

Farbtemperatur 4 K Color temperature 4 K Gruppe Cx Cy Gruppe Cx Cy Gruppe Cx Cy 4L.365.348 4M.372.352 4N.379.356.367.358.375.362.382.367.375.362.382.367.39.372.372.352.379.356.386.361 5L.367.358 5M.375.362 5N.382.367.369.368.377.373.385.376.377.373.385.378.393.383.375.362.382.367.39.372 6L.369.368 6M.377.373 6N.385.378.371.378.38.383.388.388.38.383.388.388.397.393.377.373.385.376.393.383 7L.371.378 7M.38.383 7N.388.388.374.387.383.393.392.399.383.393.392.399.41.44.38.383.388.388.397.393 8L.374.387 8M.383.393 8N.392.399.376.397.385.43.395.49.385.43.395.49.44.415.383.393.392.399.41.44 Farbtemperatur 45 K Color temperature 45 K Gruppe Cx Cy Gruppe Cx Cy Gruppe Cx Cy 4J.35.337 8J.355.374 6K.361.362.351.347.356.383.363.371.359.352.366.39.371.378.357.343.364.381.369.368 5J.351.347 4K.357.343 7K.363.371.352.356.359.352.364.381.361.362.367.358.374.387.359.352.365.348.371.378 6J.352.356 5K.359.352 8K.364.381.354.365.361.362.366.39.363.371.369.368.376.397.361.362.367.358.374.387 7J.354.365.355.374.364.381.363.371 29-1-29 1

Helligkeits-Gruppierungsschema Brightness s Helligkeitsgruppe Brightness JZ KX KY KZ 1) Seite 23 Lichtstrom Luminous Flux Φ V (mlm) 1) page 23 61.... 71. 71.... 82. 82.... 97. 97.... 112. 2) Seite 23 Lichtstärke Luminous Intensity I V (mcd) 16.5 (typ.) 19.1 (typ.) 22.4 (typ.) 26.15 (typ.) 2) page 23 Anm.: Die Standardlieferform von Serientypen beinhaltet eine Familiengruppe. Diese besteht aus wenigen Helligkeitsgruppen. Einzelne Helligkeitsgruppen sind nicht bestellbar. Note: The standard shipping format for serial types includes a family group of only a few individual brightness groups. Individual brightness groups cannot be ordered. Gruppenbezeichnung auf Etikett Name on Label Beispiel: JY-4U Example: JY-4U Helligkeitsgruppe Brightness JY Farbortgruppe Chromaticity Coordinate Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Helligkeitsgruppe enthalten. Note: No packing unit / tape ever contains more than one brightness group. 4U 29-1-29 11

2) Seite 23 Relative spektrale Emission 2) page 23 Relative Spectral Emission V(λ) = spektrale Augenempfindlichkeit / Standard eye response curve Φ rel = f (λ); T A = 25 C; I F = 35 ma 1 % OHL13674 Φ rel 8 V λ 6 4 2 4 2) Seite 23 Abstrahlcharakteristik Radiation Characteristic Ι rel = f (ϕ); T A = 25 C 5 4 45 5 55 6 65 7 75 nm 8 λ 2) page 23 3 2 ϕ 1 1..8 OHL3635 6.6 7.4 8.2 9 1 1..8.6.4 2 4 6 8 1 12 29-1-29 12

2) Seite 23 Durchlassstrom 2) page 23 Forward Current I F = f (V F ); T A = 25 C 2) 5) Seite 23 Relative Lichtstrom Relative Luminous Flux Φ V /Φ V(35 ma) = f (I F ); T A = 25 C 2) 5) page 23 I F 1 3 ma 5 OHL252 Φ Φ V 1 1 V (35 ma) OHL2726 1 2 1 5 5 1 1 2. 2.5 3. 3.5 4. V 4.5 1-1 1 1 5 1 2 ma 1 3 V F I F 2) Seite 17 Farbortverschiebung Chromaticity Coordinate Shift x, y = f (I F ); T A = 25 C ΔCx,.25 ΔCy 2) page 17 OHL3675 2) Seite 23 Farbortverschiebung Chromaticity Coordinate Shift x, y = f (T j ); I F = 35 ma ΔCx,.8 ΔCy 2) page 23 OHL3677.15.1.5 Cx Cy.4.2 -.2 -.4 Cx Cy -.5 -.6 -.1 -.8 -.15 -.1 -.2 2 4 6 8 ma 1 -.12-4 -2 2 4 6 8 C 12 I F T j 29-1-29 13

2) Seite 17 Relative Vorwärtsspannung 2) page 17 Relative Forward Voltage ΔV F = V F - V F(25 C) = f (T j ); I F = 35 ma.3 V ΔV F.2.1 -.1 -.2 OHL3676 -.3-6 -4-2 2 4 6 8 1 C 14 T j 2) Seite 23 Relative Lichtstrom Relative Luminous Flux Φ V /Φ V(25 C) = f (T j ); I F = 35 ma Φ V Φ V 1.2 (25 C).9.8.7.6.5.4.3.2.1 2) page 23 OHL13678-6 -4-2 2 4 6 8 1 C 14 T j 29-1-29 14

Maximal zulässiger Durchlassstrom Max. Permissible Forward Current I F = f (T S ) 11 ma I F 9 8 7 6 5 4 3 2 OHL2948 1 Do not use current below 1 ma 2 4 6 8 1 C T 14 Zulässige Impulsbelastbarkeit I F = f (t p ) Permissible Pulse Handling Capability Duty cycle D = parameter, T S = 25 C* I F 2.5 A 2. 1.5 1..5.2.5 1 D = t T P t P T S OHL3757 D =.5.1.2.33.5.1 I F Zulässige Impulsbelastbarkeit I F = f (t p ) Permissible Pulse Handling Capability Duty cycle D = parameter, T S = 85 C I F 2.5 A 2. 1.5 1..5 D = t T P t P D =.5.1.2.2.33.5.1.5 1 T OHL3758 I F -5 1-4 1-3 1-2 1-1 1 1 t p 1 2 1 s 1-5 1-4 1-3 1-2 1-1 1 1 t p 1 2 1 s 1 29-1-29 15

6) Seite 23 Maßzeichnung 6) page 23 Package Outlines Kathodenkennung: Cathode mark: Gewicht / Approx. weight: Markierung mark 2 mg 8) Seite 23 Gurtung / Polarität und Lage Verpackungseinheit Method of Taping / Polarity and Orientation 8) page 23 Packing 2/Rolle, ø18 mm unit 2/reel, ø18 mm 29-1-29 16

6) Seite 23 Empfohlenes Lötpaddesign Reflow 6) page 23 Recommended Solder Pad Reflow Löten Soldering Achtung: Anode und Heatsink sind elektrisch verbunden Attention: Anode and Heatsink are electrically connected 3 Lötstellen Thermisch optimiertes PCB 3 solder points Thermal enhanced PCB 1.6 (.63) 11.6 (.457) ø4. (.157) Heatsink attach Footprint 2.3 (.91) 12. (.472) 11.6 (.457) Empfohlene Padgeometrie Recommended Solder Pad Design 1 (.39) 2.3 (.91) 12. (.472) ø2.5 (.98) ø4. (.157) Kupfer Copper 1 (.39) 1.6 (.63) Lötstopplack Solder resist Lötpasten Schablone Solder paste stencil Freies Kupfer Bare Copper OHPY3637 29-1-29 17

Lötbedingungen Vorbehandlung nach JEDEC Level 4 Soldering Conditions Preconditioning acc. to JEDEC Level 4 Reflow Lötprofil für bleifreies Löten Reflow Soldering Profile for lead free soldering (nach J-STD-2B) (acc. to J-STD-2B) T 3 C 25 2 255 C 24 C 217 C Maximum Solder Profile Recommended Solder Profile Minimum Solder Profile 1 s min 3 s max OHLA687 + C 26 C -5 C 245 C ±5 C +5 C 235 C - C 15 12 s max 1 s max Ramp Down 6 K/s (max) 1 5 Ramp Up 3 K/s (max) 25 C 5 1 15 2 25 s 3 t Anm.: Das Gehäuse ist für Ultraschallreinigung nicht geeignet Note: Package not suitalbe for ultra sonic cleaning 29-1-29 18

Barcode-Produkt-Etikett (BPL) Barcode-Product-Label (BPL) OSRAM Opto Semiconductors (6P) BATCH NO: Batch Number Bar Code (1T) LOT NO: Lot Number Bar Code (X) PROD NO: Product Code (9D) D/C: Date Code (Q)QTY: Product Quantity per Reel Bar Code Lx xxxx Bin1: Bin Information Color 1 Bin2: Product Name Bin3: RoHS Compliant ML 2 Temp ST 26 C RT (G) GROUP: X - X - X Sample Additional TEXT R77 DEMY PACKVAR: Packing Type Forward Voltage Wavelength Brightness OHA1243 Gurtverpackung Tape and Reel W 1 D P P 2 F E W A N 13. ±.25 P 1 Label Direction of unreeling W 2 Direction of unreeling Gurtvorlauf: Leader: Gurtende: Trailer: 4 mm 4 mm 16 mm 16 mm OHAY324 Tape dimensions in mm (inch) W P P 1 P 2 D E F 24 +.3.1 4 ±.1 (.157 ±.4) 8 ±.1 (.315 ±.4) 2 ±.1 (.79 ±.4) 1.5 +.1 (.59 +.4) 1.75 ±.1 (.69 ±.4) 11.5 ±.1 (.453 ±.4) Reel dimensions in mm (inch) A W N min W 1 W 2 max 18 (7) 24 (.945) 6 (2.362) 24.4 + 2 (.961 +.79) 3.4 (1.197) 29-1-29 19

_< C). _< _< C). 11 _< (9D) D/C: 144 Bin2: Q-1-2 Bin3: ML Temp ST 2 22 C R 2a Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. LCW W5AM Trockenverpackung und Materialien Dry Packing Process and Materials OSRAM Moisture-sensitive label or print Barcode label Humidity indicator Barcode label Comparator check dot 5% 1% If wet, parts still adequately dry. change desiccant If wet, examine units, if necessary bake units If wet, 15% examine units, if necessary bake units WET 11 (9D) D/C: 144 Bin2: Q-1-2 Bin3: ML Temp ST 2 22 C R 2a CAUTION LEVEL If blank, see bar code label This bag contains MOISTURE SENSITIVE OPTO SEMICONDUCTORS 1. Shelf life in sealed bag: 24 months at < 4 C and < 9% relative humidity (RH). 2. After this bag is opened, devices that will be subjected to infrared reflow, vapor-phase reflow, or equivalent processing (peak package body temp. If blank, see bar code label a) Mounted within at factory conditions of 3 C/6% RH. Floor time see below b) Stored at 1% RH. 3. Devices require baking, before mounting, if: a) Humidity Indicator Card is > 1% when read at 23 C ± 5 C, or b) 2a or 2b is not met. 4. If baking is required, reference IPC/JEDEC J-STD-33 for bake procedure. Bag seal date (if blank, seal date is identical with date code). Date and time opened: Moisture Level 1 Floor time > 1 Year Moisture Level 4 Floor time 72 Hours Moisture Level 2 Floor time 1 Year Moisture Level 5 Floor time 48 Hours Moisture Level 2a Floor time 4 Weeks Moisture Level 5a Floor time 24 Hours Moisture Level 3 Floor time 168 Hours Moisture Level 6 Floor time 6 Hours Desiccant Humidity Indicator MIL-I-8835 OSRAM Anm.: Note: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte Bezüglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel Gurtung und Verpackung unter dem Punkt Trockenverpackung. Hier sind Normenbezüge, unter anderem ein Auszug der JEDEC-Norm, enthalten. Moisture-senisitve product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter Tape and Reel under the topic Dry Pack. Here you will also find the normative references like JEDEC. Kartonverpackung und Materialien Transportation Packing and Materials OHA539 Barcode label Barcode label CAUTION LEVEL This bag contains MOISTURE SENSITIVE OPTO SEMICONDUCTORS 1. Shelf life in sealed bag: 24 months at < 4 C and < 9% relative humidity (RH). 2. After this bag is opened, devices that will be subjected to infrared reflow, vapor-phase reflow, or equivalent processing (peak package body temp. If blank, see bar code label a) Mounted within at factory conditions of 3 C/6% RH. Floor time see below b) Stored at 1% RH. 3. Devices require baking, before mounting, if: a) Humidity Indicator Card is > 1% when read at 23 C ± 5 C, or b) 2a or 2b is not met. 4. If baking is required, reference IPC/JEDEC J-STD-33 for bake procedure. Bag seal date (if blank, seal date is identical with date code). Date and time opened: Moisture Level 1 Floor time > 1 Year Moisture Level 4 Floor time 72 Hours Moisture Level 2 Floor time 1 Year Moisture Level 5 Floor time 48 Hours Moisture Level 2a Floor time 4 Weeks Moisture Level 5a Floor time 24 Hours Moisture Level 3 Floor time 168 Hours Moisture Level 6 Floor time 6 Hours If blank, see bar code label OSRAM Opto Semiconductors (6P) BATCH NO: (1T) LOT NO: 2121998 123GH1234 Muster (X) PROD NO: 1 425 (Q)QTY: 2 LSY T676 Multi TOPLED Bin1: P-1-2 24 C R 3 26 C RT Additional TEXT R77 PACKVAR: (G) GROUP: R18 DEMY P-1+Q-1 OSRAM Opto Semiconductors (6P) BATCH NO: (1T) LOT NO: 2121998 123GH1234 Muster (X) PROD NO: 1 425 (Q)QTY: 2 LSY T676 Multi TOPLED Bin1: P-1-2 24 C R 3 26 C RT Additional TEXT R77 PACKVAR: (G) GROUP: R18 DEMY P-1+Q-1 OSRAM Packing Sealing label OHA244 29-1-29 2

Revision History: 29-1-29 Previous Version: 29-1-19 Page Subjects (major changes since last revision) Date of change 2 ordering codes added 28-1-8 1 color reproduction index added 28-1-8 1 typical luminous flux increased 28-1-16 1, 5 optical efficiency increased 28-1-16 1, 5 color temperature range expanded 28-1-16 15 Diagram Permissible Pulse Handling Capability changed 28-2-27 1, 4 typ. brightness updated 28-8-12 2 ordering code added 28-8-28 2, 3 ordering codes and Correlation Table updated 29-2-12 5 Thermal resistance R th JS (typ.) added 29-4-22 2, 3 ordering code corrected 29-5-26 5 OS-IN-29-2 (Forward voltage max reduced) 29-6-16 16 Package Outlines and Method of Taping / Polarity and Orientation updated 29-6-19 2, 3 ordering codes updated 29-1-19 1 typical Luminous Flux updated 29-1-19 1, 5 Optical efficiency updated 29-1-19 2, 11 Ordering codes removed 29-1-29 Wegen der Streichung der LED aus der IEC 6825-1 (2nd edition 27-3) erfolgt die Bewertung der Augesicherheit nach dem Standard CIE S9/E:22 ("photobiological safety of lamps and lamp systems") / IEC 62471 (1st edition 26-7). Im Risikogruppensystem dieser CIE- Norm erf llen die in diesem Datenblatt angegebenen LED die "moderate risk"- Gruppe (die die sich im "sichtbaren" Spektralbereich auf eine Expositionsdauer von,25 s bezieht). Unter realen Umst nden (f r Expositionsdauer, Augenpupille, Betrachtungsabstand) geht damit von diesen Bauelementen keinerlei Augengef hrdung aus. Grunds tzlich sollte jedoch erw hnt werden, dass intensive Lichtquellen durch ihre Blendwirkung ein hohes sekund res Gefahrenpotenzial besitzen. Wie nach dem Blick in andere helle Lichtquellen (z.b. Autoscheinwerfer) auch, kˆnnen tempor r eingeschr nktes Sehvermˆgen und Nachbilder je nach Situation zu Irritationen, Bel stigungen, Beeintr chtigungen oder sogar Unf llen f hren. Due to the cancellation of the LED from IEC 68251 (2nd edition 27-3), the evaluation of eye safety occurs according to the dual IEC/CIE logo standard CIE S9/E:22 ("photobiological safety of lamps and lamp systems")- IEC 62471 (1st edition 26-7). Within the risk grouping system of this CIE standard, the LEDs specified in this data sheet fall into the "lmoderate risk" group (relating to devices in the visible spectrum with an exposure time of.25s). Under real circumstances (for exposure time, eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices. As a matter of principle, however, it should be mentioned that intense light sources have a high secondary exposure potential due to their blinding effect. As is also true when viewing other bright light sources (e.g. headlights), temporary reduction in visual acuity and afterimages can occur, leading to irritation, annoyance, visual impairment, and even accidents, depending on the situation. 29-1-29 21

Patent List Patent No. US 6 66 861 US 6 277 31 US 6 245 259 Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 7) page 23 may only be used in life-support devices or systems 8) page 23 with the express written approval of OSRAM OS. 29-1-29 22

Fußnoten: 1) Helligkeitswerte werden mit einer Stromeinprägedauer von 25 ms und einer Genauigkeit von ± 11% ermittelt. 2) Wegen der besonderen Prozessbedingungen bei der Herstellung von LED können typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes überein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden können. Falls erforderlich, z.b. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankündigung geändert. 3) Farbortgruppen werden mit einer Stromeinprägedauer von 25 ms und einer Genauigkeit von ±.1 ermittelt. 4) Spannungswerte werden mit einer Stromeinprägedauer von 1 ms und einer Genauigkeit von ±,1 V ermittelt. 5) Im gestrichelten Bereich der Kennlinien muss mit erhöhten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden 6) Maße werden wie folgt angegeben: mm (inch) 7) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems führen wird oder die Sicherheit oder Effektivität dieses Apparates oder Systems beeinträchtigt. 8) Lebenserhaltende Apparate oder Systeme sind für (a) die Implantierung in den menschlichen Körper oder (b) für die Lebenserhaltung bestimmt. Falls sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. Remarks: 1) Brightness groups are tested at a current pulse duration of 25 ms and a tolerance of ± 11%. 2) Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 3) Chromaticity coordinate groups are tested at a current pulse duration of 25 ms and a tolerance of ±.1. 4) Forward voltages are tested at a current pulse duration of 1 ms and a tolerance of ±.1 V. 5) In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit. 6) Dimensions are specified as follows: mm (inch). 7) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 8) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered. Published by OSRAM Opto Semiconductors GmbH Leibnizstrasse 4, D-9355 Regensburg www.osram-os.com All Rights Reserved. 29-1-29 23