SE Eier gerillt / SE-type Eggs with lines Ei, gerillt Egg with lines Ei, gerillt Egg with lines Formen für Hohlkörper-Schleudern Moulds for spinning machines Ei, bork Egg, bark style SE-059-A-L TFSE-059-G x mm 7 x SE-009-BO-L TFSE-009-G ca. 5 g SE-0-BO-L 0 x 0 mm SE-00-BO-L TFSE-00-G/-K x mm SE-05-BO-L TFSE-05-G 79 x 5 mm SE-079-L TFSE-079-G 5 x 0 mm x SE-00-BO-L SE-09-BO-L TFSE-00-G/-K TFSE-09-G x 5 mm x 57 mm 0 x 0 mm 0 x 0 mm 5 x 0 mm 0 5 5 5x x x SE-0-BO-L TFSE-0-G 9 x 5 mm x SE-0050.05-L x 9 mm SE-00-BO-L TFSE-00-G 00 x mm x SE-0090-BO-S* 7 x 95 mm SE-0-BO-L TFSE-0-G 00 x 7 mm 0 x5 SE-0090-BO-L 7 x 95 mm SE-00-BO-S* TFSE-00-G/-K 00 x 7 mm x SE-009-BO-L TFSE-009-G/-K 5 x 95 mm SE-00-BO-L TFSE-00-G/-K 00 x 7 mm ca. 5 g x SE-077-BO-S* TFSE-077-G/-K x 00 mm SE-005-BO-S* TFSE-005-G 0 x 7 mm x SE-077-BO-L TFSE-077-G/-K x 00 mm SE-005-BO-L TFSE-005-G 0 x 7 mm x SE-055-BO-L TFSE-055-G x 0 mm SE-00-BO-L TFSE-00-G/-K 0 x mm ca. 00 g x SE-0-BO-L TFSE-0-G 0 x 0 mm 5 x 50 mm 0 x 0 mm 9 x SE-0-A-BO-L TFSE-0-G 0 x 0 mm SE-00-L x 07,5 mm SE-009-BO-L TFSE-009-G 70 x mm SE-0095-BO-S* 7 x 9 mm SE-0095-BO-L 7 x 9 mm SE-009-BO-L TFSE-009-G x 5 mm 0 x 0 mm SE-0097-BO-L TFSE-0097-K 9 x 0 mm x SE-0-BO-L TFSE-0-G 9 x 5 mm x SE-05.0-BO-L TFSE-05.0-G/-K 0 x 5 mm 95 x 00 mm SE-075-BO-L TFSE-075-G/-K 9 x 5 mm 5 x 00 mm SE-009-BO-L TFSE-009-G 5 x 0 mm 0 x 70 mm x SE-00-BO-B TFSE-00-G 50 x 0 mm x Extra groß mit Bügel Extra large with bowshaped angle piece 00
SE Eier gerillt / SE-type Eggs with lines Ei mit Strahlen Ei mit Linien Egg with lines Egg with lines SE-07.0-S* SE-0099-L TFSE-07.0-G TFSE-0099-G x 5 mm x 5 mm x 5 mm ca. 50 g 5 x 0 0 x mm 5 5 x x7 SE-009-L Ei bork mit abgeflachtem Boden Egg bark style (with flat bottom) SE-00-BO-L-AB SE-0090-BO-L-AB SE-009-BO-L-AB SE-055-BO-L-AB TFSE-00-G TFSE-005-G TFSE-00-G-/-K TFSE-009-G/-K TFSE-055-G 00 x mm 0 x 7 mm 0 x mm 7 x 95 mm 5 x 95 mm x 00 mm 0 x 0 mm x x x SE-0-BO-L-AB SE-0095-BO-L-AB SE-0097-BO-L-AB SE-075-BO-L-AB TFSE-0-G TFSE-0097-G TFSE-075-G/-K 0 x 0 mm 7 x 9 mm 9 x 0 mm 9 x 5 mm 5 x 00 mm x SE-00-BO-L-AB en Sie rößen find g der Eierg Eiergrößen n u tz ä h sc mit : schen Ein Zur realisti eine Schablone s you find a mask ze e si it ge S eg f au ion of tic estimat s on page For a realis : egg-size g in ow sh S* = Winkel an der Schmalseite/Angle piece on the short side 0 SE-005-BO-L-AB
SE Eier kroko / SE-type Eggs Crocodile Style Ei, kroko Egg, crocodile style Formen für Hohlkörper-Schleudern Moulds for spinning machines SE-07.0-S* TFSE-07.0-G ca. g x SE-00-K-L TFSE-00-G 75 x 50 mm 5 x 00 mm SE-009-K-S* TFSE-009-G ca. g 0 x 0 mm x7 SE-05-K-L TFSE-05-G x 5,5 mm 0 x 0 mm 5 SE-009-K-L TFSE-009-G ca. g 0 x 0 mm x7 SE-00-K-L TFSE-00-G/-K x 5 mm 5 SE-07-K-L 5 x 0 mm 0 x 50 mm SE-07-K-L TFSE-07-G 5 x 57 mm SE-007-K-L TFSE-007-G 0 5x SE-007.7-L TFSE-007.7-G/-K 9 x mm 0 x mm SE-0-K-L 0 x 0 mm 0 5x SE-0-K-L TFSE-0-G 00 x 7 mm 0 SE-00-K-L TFSE-00-G/-K x mm x SE-00-K-S* TFSE-00-G/-K 00 x 7 mm SE-00-K-L TFSE-00-G 9 x 7 mm x SE-00-K-L TFSE-00-G/-K 00 x 7 mm x x x5 x x SE-007.-L SE-005-K-L SE-007.9-L SE-00-K-L SE-007.0-L SE-0090-K-L SE-0090-K-S* SE-009-K-L TFSE-005-G TFSE-00-G/-K TFSE-007.0-G TFSE-009-G/-K 0 x 7 mm 0 x 50 mm x SE-077-K-S* TFSE-077-G/-K x 00 mm 0 x 7 mm x SE-077-K-L TFSE-077-G/-K x 00 mm 5 x 5 mm 0 x 0 mm SE-007.-L 55 x 0 mm 0 x 0 mm 0 x mm SE-0-K-L TFSE-0-G 0 x 0 mm 9 x 95 mm 0 x 50 mm SE-059-K-L TFSE-059-G 0 x 0 mm 0 x 0 mm 7 x 95 mm SE-009-K-S* TFSE-009-G 70 x mm 7 x 95 mm SE-009-K-L TFSE-009-G 70 x mm 5 x 95 mm SE-0095-K-L 7 x 9 mm SE-009-K-L SE-007.-L SE-0097-K-L SE-075-K-L SE-00-K-L SE-09-K-L TFSE-009-G TFSE-0097-K TFSE-075-G/-K TFSE-00-G TFSE-09-G x 5 mm 95 x 0 mm 9 x 0 mm 9 x 5 mm 5 x 0 mm 7 x mm 0 x 0 mm 50 x 50 mm 5 x 00 mm 0 x 70 mm 0 x 0 mm x x x SE-009-K-L SE-0-K-B TFSE-009-G TFSE-0-G 5 x 0 mm 50 x 50 mm 0 x 70 mm x x Extra groß mit Bügel Extra large with bowshaped angle piece Zur realistischen Einschätzung der Eiergrößen finden Sie auf Seite eine Schablone mit : Eiergrößen For a realistic estimation of egg-sizes you find a mask showing : egg-sizes on page 0
SE Eier kroko / SE-type Eggs Crocodile Style Ei, gehämmert Ei mit Sockel, kroko Egg, hammered Egg with foot, crocodile style SE-07-L SE-009.0-L SE-0050.-L 5 x 0 mm 50 mm x 0 mm 0 x 50 mm 0 x 0 mm 0 x 0 mm x Ei kroko mit abgeflachtem Boden Egg crocodile style with flat bottom SE-059-K-L-AB SE-009-K-L-AB SE-0095-K-L-AB SE-009-K-L-AB SE-075-K-L-AB TFSE-00-G/-K TFSE-059-G TFSE-009-G TFSE-009-G TFSE-075-G/-K 0 x mm 0 x 0 mm 70 x mm 7 x 9 mm x 5 mm 9 x 5 mm 0 x 0 mm 0 x 0 mm 5 x 00 mm SE-00-K-L-AB Divider sheets are used to manufacture separate halves of hollow figures so that these halves can be filled (e.g. as shell for pralines or as surprise eggs). The two halves can be looked in a fixed or a loose way. The joint face can be flat or interlocking for male and female halves. You can find available divider sheets in the list of SE- moulds. The part number of divider sheets with flat joint faces end with -G, the interlocking ones with -K. Ergebnis von glatter Trennfolie Result of flat divider Sheet Ergebnis von gekröpfter Trennfolie Result of interlocking divider sheet *S = Winkel an der Schmalseite/Angle piece on the short side L = Winkel an der Längsseite/Angle piece on the long side 0 Trennfolien / Divider Sheets
SE Eier glatt / SE-type Eggs smooth style Ei, glatt Egg, smooth style SE-0-L SE-07-G-L SE-0-G-L SE-0-G-L SE-009-G-L SE-009.0-L SE-000-G-L TFSE-0-G TFSE-0-K TFSE-009-G TFSE-000-G Formen für Hohlkörper-Schleudern Moulds for spinning machines 0 x 7 mm 5 x 75 mm x SE-0050.-L 5 x mm 5 x 00 mm x x 9 mm SE-007-G-L TFSE-007-G 0 5x x 9 mm 0 x 50 mm x7 SE-0007-G-L TFSE-0007-G 0 x 50 mm x 7 x 0 mm x7 SE-0-L TFSE-0-G x mm 0 x 0 mm x 0 x 0 mm x7 SE-07-G-S* TFSE-07-G x mm 95 x 00 mm x 5 x mm 0 x 0 mm 0 SE-05-L x 5 mm x 5 x 5 mm x7 SE-00-G-L TFSE-00-G/-K x mm SE-00-G-L SE-0-G-L SE-05-G-L SE-00-G-S* SE-00-G-L SE-09-G-L SE-0005-G-L TFSE-00-G TFSE-05-G TFSE-00-G/-K TFSE-00-G/-K TFSE-09-G TFSE-0005-G 9 x 7 mm SE-00-G-S* TFSE-00-G/-K 00 x 7 mm 7,5 x 5, mm x SE-00-G-L TFSE-00-G 00 x mm 0 x 5,5 mm 0 x 0 mm 5 SE-0-G-L TFSE-0-G 00 x 7 mm 0 x5 x 5 mm 5 SE-00-G-L TFSE-00-G/-K 00 x 7 mm x 5 mm 5 SE-005-G-L TFSE-005-G 0 x 7 mm x 57 mm 5 x 0 mm x SE-00-G-S* TFSE-00-G/-K 0 x mm x 57 mm 0 x mm x SE-00-G-L SE-0090-G-S* SE-0090-G-L SE-009-G-L SE-077-G-S* TFSE-00-G/-K TFSE-009-G/-K TFSE-077-G/-K 0 x mm 7 x 95 mm 7 x 95 mm 5 x 95 mm x 00 mm Zur realistischen Einschätzung der Eiergrößen finden Sie auf Seite eine Schablone mit : Eiergrößen For a realistic estimation of egg-sizes you find a mask showing : egg-sizes on page 0
SE Eier glatt / SE-type Eggs smooth style Ei, glatt Egg, smooth style SE-077-G-L SE-055-G-L SE-0-G-L SE-059-G-L SE-009-G-L SE-0095-G-S* SE-0095-G-L TFSE-077-G/-K TFSE-055-G TFSE-0-G TFSE-059-G TFSE-009-G x 00 mm x 00 mm 0 x 0 mm 0 x 0 mm 70 x mm 7 x 9 mm 7 x 9 mm 0 x 0 mm 0 x 0 mm SE-0097-G-L SE-05.0-L SE-075-G-L SE-00-G-L SE-009-G-L SE-0-G-B TFSE-0097-K TFSE-05.0-K TFSE-075-G/-K TFSE-00-G TFSE-009-G TFSE-0-G 9 x 0 mm 0 x 5 mm 9 x 5 mm 5 x 0 mm 5 x 0 mm 50 x 50 mm ca. 00 g 95 x 00 mm 5 x 00 mm 0 x 70 mm 0 x 70 mm x x x x Extra groß mit Bügel Extra large with bowshaped angle piece Oval-Ei, glatt Oval egg, smooth style SE-00-G TFSE-00-G-L 9 x mm x SE-0-G-L x mm 5 x 50 mm 7 x Tipp: Ohne großen Kostenaufwand können wir für Sie auch andere Oberflächenmuster fertigen. If requested we can change the surface of the eggs (e.g. from mat to shiny or the other way round) at reasonable costs. SE Eier Muschelmuster / SE-type Eggs shell style Ei, Muschelmuster Egg, shell style Formen der Eier können variieren (spitzer, runder etc.) Article outline can differ (more pointed or roundly etc.) SE-0-MU-L TFSE-0-G 0 x 0 mm *S = Winkel an der Schmalseite/Angle piece on the short side L = Winkel an der Längsseite/Angle piece on the long side 05
SE Motiv-Eier / SE-type Eggs with Pictures Bild-Ei, Hase auf Motorrad Bild-Ei, Holländerin Egg with picture Rabbit on motorbike Egg with picture Dutch woman SE-0005-D-L TFSE-0007-G TFSE-0005-G TFSE-0007-G TFSE-05-G TFSE-0005-G x 57 mm 79 x 5 mm x 57 mm 0 x 50 mm 0 x mm 0 x 50 mm 0 x 0 mm 0 x mm 5 x 5x x SE-0007-D-L x SE-0007-E-L SE-05-AA-L SE-0005-E-L x Bild-Ei, Hasen-Tanzpaar Bild-Ei, Maler-Hase Egg with picture Dancing rabbit couple Egg with pictures Painting rabbit SE-0005-C-L TF-SE-0007-G TF-SE-0005-G TFSE-0007-G TFSE-0005-G x 57 mm x 57 mm SE-0007-C-L SE-0007-B-L SE-0005-B-L 0 x 50 mm 0 x mm 0 x 50 mm 0 x mm x x x x Bild-Eier Egg with different pictures Formen für Hohlkörper-Schleudern Moulds for spinning machines SE-05-BE-L SE-09-BE-L TFSE-0007-G TFSE-0-G TFSE-09-G 79 x 5 mm x 57 mm 0 x 50 mm 0 x 0 mm 5 x 0 mm 5 x SE-0007-A-L x Bild-Eier Eggs with different pictures SE-00-BE-L Eggs with different pictures SE-007-BE-L TFSE-00-G TFSE-007-G 9 x 7 mm x 5 mm 5 x Eiersortiment Egg assortment SE-0-L 9 x mm 0 0 Bild-Eier x5 Sie ßen finden der Eiergrö iergrößen g n u tz ä h E mit : schen Einsc Zur realisti eine Schablone s you find a mask ze e si it ge S eg auf ion of tic estimat page For a realis egg-sizes on : g in show
Bild-Ei, gemischt Ei mit Hippie-Design Egg with pictures ( different) Egg with Hippie design SE-0097.-L SE-0599-L mm 0 x 05 mm ca. 0 g x Kroko-Ei mit Hasenkopf Ei mit Gras (Sollbruchstelle) Crocodile egg with rabbit head Egg with grass (with breaking groove) SE-009.-L SE-0-S-L 7 mm mm 0 x 0 mm *S = Winkel an der Schmalseite/Angle piece on the short side L = Winkel an der Längsseite/Angle piece on the long side 07 SE Motiv-Eier / SE-type Eggs with Pictures