Parameter-Updatesoftware PF-12 Plus Mai / May 2015 Inhalt 1. Durchführung des Parameter-Updates... 2 2. Kontakt... 6 Content 1. Performance of the parameter-update... 4 2. Contact... 6
1. Durchführung des Parameter-Updates Mit der Parameter-Updatesoftware für das Kompaktphotometer PF-12 Plus können Sie auf Ihr PF-12 Plus einfach und schnell die aktuellsten Parameter aufspielen. Voraussetzung: Betriebssystem Microsoft Windows 7, Windows 8 oder Windows Vista Gerät: PF-12 Plus ab Firmware-Version 1.0.6 aufwärts Sie benötigen: Gerät: PF-12 Plus, welches das Parameter-Update benötigt Parameter-Updatesoftware für das PF-12 Plus (Auf unserer Homepage unter http://www.mn-net.com/pf-12plus.) Parameter-Updatedatei (Auf unserer Homepage unter http://www.mn-net.com/pf- 12Plus. Wird nur benötigt, wenn während des Updates keine Verbindung zum MN- Webserver besteht.) NANOCOLOR USB Kabel A/B (REF 919 687) Hinweis: Trennen Sie niemals die Verbindung von Computer zu Gerät während eines Updates. Anderenfalls kann Ihr Gerät Schaden nehmen. Nicht verwendbare Bedienelemente werden in der Parameter-Updatesoftware verschwommen dargestellt. Installation der Software: 1. Sollte sich bereits eine Version der Parameter-Updatesoftware auf ihrem Computer befinden, so muss diese vor Installation der neuen Version über die Systemsteuerung deinstalliert werden. 2. Zur Installation der neuen Version öffnen Sie den Ordner, der die Software Dateien enthält. 3. Doppelklicken Sie auf PF12 Plus Methoden Upload. 4. Folgen Sie den Anweisungen auf dem Bildschirm. Anleitung: 1. Verbinden Sie das Gerät mittels des USB Kabels mit Ihrem Computer. 2. Schalten Sie das Gerät ein. 3. Öffnen Sie auf dem Computer die Software über das PF-12 Plus Method Update Icon. Der folgende Bildschirm erscheint:
4. Drücken Sie das Suchen-Icon ( ) um nach einem angeschlossenen Gerät zu suchen. Alle gefundenen Geräte werden in einer Dropdown-Liste angezeigt. Wählen Sie das gewünschte Gerät anhand der Seriennummer (z. B. NPF12P0205) aus, welche Sie auf der Rückseite des Gerätes finden. 5. Sobald das Gerät gefunden wurde, wird die Device Version, die Loaded Version sowie die Version Source angezeigt. Folgende Alternativen können im Feld Version Source ausgegeben werden: A Die Software konnte keine Verbindung zum MN-Webserver herstellen. Das Update erfolgt mit der Updatedatei, welche in der Software hinterlegt ist. W Die Software ist mit dem MN-Webserver verbunden. Das Update erfolgt mit der aktuellen Updatedatei, welche auf unserem Webserver hinterlegt ist. F Bei fehlender Verbindung zu unserem Webserver können Sie die aktuelle Updatedatei unter http://www.mn-net.com/pf-12plus herunterladen und über in der Updatesoftware suchen und laden. 6. Drücken Sie um das Parameter-Update zu starten. Der Fortschritt des Updates wird anhand des grünen Balkens angezeigt. 7. Nachdem das Update erfolgreich durchgeführt wurde, steht Ihnen das Gerät mit dem neuen Parameterupdate zur Verfügung.
1. Performance of the parameter-update The parameter-updatesoftware for the compact photometer PF-12 Plus allows you to update your PF-12 Plus easily and quickly with the latest set of parameters. Precondition: Operating system Microsoft Windows 7, Windows 8 or Windows Vista Instrument: PF-12 Plus from firmware-version 1.0.6 onwards Required equipment: Instrument: PF-12 Plus, which needs the parameter-update Parameter-updatesoftware for the PF-12 Plus (On our homepage via http://www.mnnet.com/pf-12plus.) Parameter-updatefile (On our homepage via http://www.mn-net.com/pf-12plus. Only needed when the connection to the MN-webserver fails.) NANOCOLOR USB cable A/B (REF 919 687) Note: Do not interrupt the connection between the computer and the instrument during the update process. Otherwise, this may cause damage to your instrument. Unusable control elements are displayed blurred in the parameter-updatesoftware. Installing the software: 1. If there is installed an old version of the parameter-updatesoftware, it has to be removed via the system settings prior to installation of the new version. 2. For installation of the new version open the folder that includes the software files. 3. Double-click on PF12 Plus Methoden Upload. 4. Follow the instructions on the screen. Instruction: 1. Connect the instrument via the USB cable to your computer. 2. Turn on the instrument. 3. Start the software on the computer by using the PF-12 Plus Method Update icon. The following window will appear:
4. Please press the search button ( ) to search for a connected instrument. All instruments which have been found are shown in a drop-down list. Please select the desired instrument on the basis of the serial number (e. g. NPF12P0205) which you can find on the backside of the instrument. 5. Once the instrument has been found, the current Device Version, the Loaded Version as well as the Version Source are shown. The following alternatives are available in the field Version Source : A The software could not be connected to the MN-webserver. The update will proceed with the updatefile implemented in the software. W The software is connected to the MN-webserver. The update will proceed with the latest updatefile taken from the webserver. F If there is no connection to our webserver, the latest updatefile can be downloaded via http://www.mn-net.com/pf-12plus and added to the software via. 6. Please press to start the parameter-update. The progress of the update is indicated by the green status bar. 7. After the update has been performed successfully, the instrument is updated with the new parameter-update.
2. Kontakt Für weitere Fragen stehen wir Ihnen selbstverständlich gerne zur Verfügung: Technischer Support und Kundenberatung +49 24 21 969-331 csc@mn-net.com Bestellannahme (national) 0800 2616 000 sales-de@mn-net.com 2. Contact For further questions, please do not hesitate to contact us: Technical support and customer service +49 24 21 969-332 csc@mn-net.com For orders (international) sales@mn-net.com