Product range at a glance

Product range at a glance

Flat rolled products Systems. Service. Steel. The stock keeping trade is the perfect combination of sales, services, storage and logistics worldwide. A customer-orientated sales concept and an individual service are our particular strengths. The basis of our success, however, is represented by the products, which stand out with the highest quality and predominantly originate from the group s own production. It is our goal to satisfy customers with lasting trust in our products and services. We are committed to realising this: in our company, in the entire group, at every single level and in everything that we accomplish for you. Structural steel plates Hot rolled steel plates in quality S 235 JR+N / EN 10025 Standard-no. 1.0038 3 350 mm 1,000 3,000 mm Tear Plates in quality S 235JR / DIN 59220 1,000 2,500 mm 2,000 12,000 mm Hot rolled steel plates in quality S235JR / EN 10025, DD 11 / EN 10111 With or without skin-pass, pickled, oiled / unoiled Standard-no. 1.0038 / 1.0332 Tolerances EN 10029 / 10051, certificate EN 10204 / 2.2 1.5 20 mm 1,000 2,000 mm 2,000 12,000 mm Hot rolled steel plates in quality S355J2+N / EN 10025 Standard-no. 1.0570 3 350 mm General pressure vessel steel Boiler plates in quality P265GH / EN 10028 Standard-no. 1.0425 3 200 mm 2,000 14,000 mm 3

Flat rolled products Flat rolled products Shipbuilding plates Normal qualities to the specifications of the classification agency German Lloyd or other inspection GL A, GL B, GL D, GL E High-tensile qualities to the specifications of the classification agency German Lloyd or other inspection GL A 32, GL D 32, GL A 36, GL D 36, GL E 32, GL E 36 Cold rolled steel sheets DC 01 Am + DC 03 Am / EN 10130, oiled / unoiled Standard-no. 1.0330 Tolerances EN 10131, certificate EN 10204 / 2.2 0.5 2.99 mm Surface coated sheets Hot dipped galvanized sheets DX 51 D + Z 275 NA CR / EN 10327 (ST02Z275 NACR) Standard-no. 1.0226 Tolerances EN 10143, certificate EN 10204 / 2.2 0.5 5 mm Electrolytically galvanized sheets DC 01 + ZE 25 / 25 APC / EN 10152 (ST12ZE25/ 25-03 PHCR) Standard-no. 1.0330 Tolerances EN 10131, certificate EN 10204 / 2.2 0.5 2.99 mm Special abrasion resistant steel ASH 80 (200-265 hardness) acc. to SEMI MANAX ASH 90 (1.8704) (min. 265 hardness) ASH 120 / Brinar 400 (min. 360 hardness) ASH 150 / Brinar 500 High strength fine grained structural steel EN 10025-6 S690 QL / QL 1 S890 QL S960 QL 3 15 mm 5 50 mm 4 200 mm Weldable fine grained structural steel for cold forming EN 10149-2 S355 MC (QSTE 380 TM) 2 30 mm (1 12 mm also in pickled and oiled) S 420 MC (QSTE 420 TM) 3 10 mm S 460 MC (QSTE 460 TM) S 500 MC (QSTE 500 TM) S 700 MC (QSTE 690 TM) 2 20 mm Alloyed case hardening steel EN 10084 16 MnCr 5 3 200 mm 20 MnCr 5 3 200 mm Alloyed heat resistant steel EN 10028-2 16 Mo 3 1 200 mm 13 CrMo 4-5 5 200 mm 10 CrMo 9-10 5 200 mm P 295 GH 8 50 mm P 355 GH 8 50 mm Fine grained structural steel for constructions and pressure vessels EN 10028-3 /EN 10025-3 P355 NL1 / P355 NH S 355 NL P 460 NL1 S 460 NL 4 200 mm Non-alloyed heat resistant and heat treatable steel EN 10083 42 CroMo 4 2 200 mm C 45 2 150 mm Weatherproof steel Corten A / S 355 J 2 WP Corten B / S 355 J 2 W + N Plates acc. to ASTM / ASME Standard ASME SA 516 Gr. 60 ASTM A / ASME SA 516 Gr. 70 ASTM A / ASME SA 387 Gr. 12 CL.2 ASTM A / ASME SA 387 Gr. 22 CL.2 Sheet metals from heat resistant, high grade and stainless steel 1.4301 / 1.4307 / AISI 304 / 304 L / 304 H 1.4541 / AISI 321 1.4571 / AISI 316 Ti 1.4404 / AISI 316 L 1.4462 / S 31803 1.4828 / AISI 309 1.4841 / AISI 310 1.4878 Surface finish Dimension 1 2.5 mm 3 50 mm 3 80 mm 5 80 mm 5 100 mm hot rolled C2 / IIA 3.0 100 mm 1,500 x 6,000 mm 2,000 x 6,000 mm 2,500 x 6,000 mm 2,500 x 8,000 mm 3,000 x 6,000 mm Tool steel grades 1.1730 / C 45 W to EN ISO 4957 6 150 mm 1.2312 to EN ISO 4957 10 120 mm Cuttings from tool steel grades, 6-360 mm, tol. -0/+2 mm C 45 W 1.2311 1.2312 1.2842 on request Min 120 mm Max 1,600 mm Min 500 mm Max 7,000 mm 4 5

Pipes Long rolled products / Special service Water-bearing steel pipes EN 10255 / DIN 2440 / 2441 Dimensions 1/4 6 EN 10224 / DIN 2460 seamless 88.9 508.0 mm welded 88.9 2,020.0 mm seamless until 11.0 mm welded until 17.5 mm Seamless steel tubes for pressure purposes EN 10216-1 or rather EN 10216-3 / DIN 1629 EN 10216-2 / DIN 17175, EN 10216-3 / DIN 1629 Welded steel tubes for pressure purposes EN 10217-1 / DIN 1626 Seamless circular steel tubes for mechanical and general engineering EN 10297-1 10.2 711.0 mm until 100.0 mm 10.2 2,540.0 mm until 40.0 mm 26.9 610.0 mm until 100.0 mm Steel tubes for structural applications EN 10210 / DIN 17120, 17121, 17123, 17124, 59410 EN 10219 / DIN 17120, 59411 round 21.3 2,020 mm (seamless until 660.0) square 20 x 20 mm 500 x 500 mm rectangular 30 x 20 mm 700 x 300 mm elliptical 120 x 60 mm 480 x 240 mm round until 50.0 mm square and rectangular until 20.0 mm elliptical until 16.0 mm Beams / Channels / Wide flanged beams Quality S 235 JR 6-25 m length HEB HEA HEM IPE UNP INP UPE 80 600 mm 80 550 mm Quality S 355 J 2 6-25 m length HEB HEA HEM IPE 80 600 mm UNP UPE Cold sawcuts on request, tolerances down to +/- 1 mm Bevel cuts acc. to drawings Merchant Bars Quality S 235 JR / S 355 JO /J 2 of 6 and / or 12 m Flat bars Equal angles Unequal angles Round bars Square bars Small channels T-bars HR-Strip 16 150 mm 20 200 mm 40 x 20 250 x 90 mm 6 200 mm 6 100 mm 30 65 mm 20 140 mm 20 x 3 150 x 6 mm Special service Since 2000 our enterprise disposes of a certification to EN ISO 9001. All essential operations were documented for this certification, which now serves our personal as guide line for optimum order processing Shotblasting and primer in our own stock Cutting of profiles, plates, hollow sections and tubes Through thickness testing in accordance with SEL 096 (Z 15, Z 25, Z 35) Bead-on weld tests acc. to SEP 1390 Add. EN 10204 / 3.1 by TÜV, DB, GL, LR or other inspection Ultrasonic test acc. to classifications and conditions of SEL 072, EN 10160, ASME / ASTM 435 Salzgitter Mannesmann Stahlhandel GmbH Beisenstraße 53 45964 Gladbeck Germany Fax: +49 2043 407-870 Markus Pieper, Director +49 2043 407-800 markus.pieper@szmh-group.com Helga Jansen, Secretary +49 2043 407-825 helga.jansen@szmh-group.com Steel tubes for precision applications EN 10305-1 to - 5 / DIN 2391, 2393, 2394, 2395 round 4.0 165.0 mm square 10 x 10 mm 100 x 100 mm rectangular 20 x 10 mm 120 x 60 mm round 0.5 12.5 mm square and rectangular 1.0 4.0 mm Line pipes for gases and flammable liquids EN 10208 / DIN 2470-1, DIN 1626, 1629, 17172 33.7 1,626.0 mm (seamless until 660.0) until 40.0 mm 6

Sales organisation Salzgitter Mannesmann Stahlhandel GmbH Schwannstraße 12 40476 Düsseldorf Postfach 30 09 43 40409 Düsseldorf Germany Tel.: +49 211 4300-1 Fax: +49 211 4300-90 www.salzgittermannesmannstahlhandel.com Berlin Seidelbastweg 133 12357 Berlin Tel.: +49 30 66099-0 Fax: +49 30 66099-109 Düsseldorf Schwannstraße 12 40476 Düsseldorf Postfach 30 10 03 40410 Düsseldorf Tel.: +49 211 4300-1 Fax: +49 211 4300-653 Eiterfeld Meininger Weg 8 36132 Eiterfeld Tel.: +49 6672 9206-0 Fax.: +49 6672 9206-66 Fürth Hafenstraße 91 90768 Fürth Postfach 25 52 90715 Fürth Tel.: +49 911 7570-0 Fax: +49 911 7570-100 Gladbeck Beisenstraße 53 45964 Gladbeck Postfach 5 20 45955 Gladbeck Tel.: +49 2043 407-0 Fax: +49 2043 407-991 Köthen Friedrich-Ebert-Straße 39 06366 Köthen Postfach 11 58 06351 Köthen Tel.: +49 3496 501-0 Fax: +49 3496 501-215 Mannheim Dortmunder Straße 4-6 68219 Mannheim Postfach 81 05 29 68205 Mannheim Tel.: +49 621 8040-0 Fax: +49 621 8040-110 Mülheim Pilgerstraße 19 45473 Mülheim Tel.: +49 208 74055-0 Fax: +49 208 74055-70 München Triebstraße 32 80993 München Postfach 50 06 60 80976 München Tel.: +49 89 149099-0 Fax: +49 89 141300-1 Osterholz-Scharmbeck Am Binnenfeld 1 27711 Osterholz-Scharmbeck Tel.: +49 4791 18-0 Fax: +49 4791 18-10 Schweiz, Zofingen Untere Brühlstraße 21 4800 Zofingen Tel.: +41 62 7522150 Fax: +41 62 7522151 Frankreich, Straßburg 3a rue de Dunkerque 67000 Strasbourg B.P. 60049 67016 Strasbourg-Cedex Tel.: +33 388456590 Fax: +33 388455866 Hamburg Andreas-Meyer-Straße 15 22113 Hamburg Postfach 74 07 10 22097 Hamburg Tel.: +49 40 78958-0 Fax: +49 40 78958-237 Plochingen Am Rheinkai 30 73207 Plochingen Postfach 1340 73203 Plochingen Tel.: +49 7153 601-0 Fax: +49 7153 601-103 Hannover Wiesenauer Straße 17 30179 Hannover Postfach 48 67 30048 Hannover Tel.: +49 511 6700-0 Fax: +49 511 6700-204 Zeithain Mannesmannstraße 8 01619 Zeithain Tel.: +49 3525 60 60-0 Tel.: +49 3574 4679-0 Fax: +49 3574 4679-487 Sales organisation SMSD Product range 02 E/02.10