DMP 331 DRUCK & TEMPERATUR LEITENBERGER GMBH. Industrial. Stainless Steel Sensor. Industrial. Pressure Transmitter. accuracy according to IEC 60770:
|
|
- Ingeborg Holst
- vor 5 Jahren
- Abrufe
Transkript
1 DRUCK & TEMPERATUR LEITENBERGER GMBH DMP Industrial Pressure Transmitter for Low Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO Industrial Pressure Transmitter Nominal pressure: from mbar up to bar Output signals: wire: ma wire: 0 0 ma / 0 0 V others on request Special characteristics: perfect thermal behaviour excellent long term stability pressure port G /" flush from 00 mbar on Optional versions: IS version Ex ia = intrinsically safe for gases and dusts SIL according to IEC 6508 / IEC 65 pressure sensor welded customer specific versions The pressure transmitter DMP can be used in all industrial areas when the medium is compatible with stainless steel.4404 (6 L) or.445 (6 L). Additional are different elastomer seals as well as a helium tested welded version available. The modulare concept of the device allows to combine different stainless steel sensors and electronic modules with a variety of electrical and mechanical versions. Thus a diversity of variations is created, meeting almost all requirements in industrial applications. Preferred areas of use are: Plant and Machine Engineering Environmental Engineering (water sewage recycling) Energy Industry DMP DRUCK & TEMPERATUR Leitenberger GmbH Bahnhofstr. D 78 Kirchentellinsfurt GERMANY Tel. +49 (0) Fax +49 (0) E Mail: DT Info@Leitenberger.de temperatur.de
2 DMP Input pressure range Nominal pressure gauge / abs. [bar] Overpressure [bar] Burst pressure [bar] Nominal pressure gauge / abs. [bar] Overpressure [bar] Burst pressure [bar] Vacuum resistance P N bar: unlimited vacuum resistance P N < bar: on request Output signal / Supply Standard wire: ma / V S = 8... V DC Option IS protection wire: ma / V S = V DC Options wire wire: ma / V S = V DC V / V S = V DC Performance Accuracy standard: nominal pressure < 0.4 bar: ± 0.5 % FSO nominal pressure 0.4 bar: ± 0.5 % FSO option : nominal pressure 0.4 bar: ± 0.5 % FSO option : for all nominal pressure: ± 0. % FSO Permissible load current wire: R max = [(V S V S min) / 0.0] current wire: R max = 500 Ω voltage wire: R min = 0 kω Influence effects supply: 0.05 % FSO / 0 V load: 0.05 % FSO / kω Long term stability ± 0. % FSO / year at reference conditions Response time wire: 0 msec wire: msec accuracy according to IEC limit point adjustment (non linearity, hysteresis, repeatability) Thermal effects (Offset and Span) Nominal pressure P N [bar] 0 < Tolerance band [% FSO] ± 0.75 ± ± 0.75 in compensated range [ C] Permissible temperatures Permissible temperatures medium: C electronics / environment: C storage: C Electrical protection Short circuit protection permanent Reverse polarity protection no damage, but also no function Electromagnetic compatibility emission and immunity according to EN 66 Mechanical stability Vibration 0 g RMS ( Hz) according to DIN EN Shock 500 g / msec according to DIN EN Materials Pressure port stainless steel.4404 (6 L) Housing stainless steel.4404 (6 L) Option compact field housing stainless steel.405 (0), cable gland brass, nickel plated others on request Seals (media wetted) standard: FKM options: EPDM NBR welded version others on request Diaphragm stainless steel.445 (6 L) Media wetted parts pressure port, seals, diaphragm welded version only with pressure ports according to EN 87 Explosion protection (only for 4 0 ma / wire) Approval DX9 DMP IBExU 0 ATEX 068 X zone 0: II G Ex ia IIC T4 Ga zone 0: II D Ex ta IIIC T 85 C, IP6x in preparation Safety technical maximum values U i = 8 V, I i = 9 ma, P i = 660 mw, C i 0 nf, L i 0 µh Permissible temperatures for environment in zone 0: C with p atm 0.8 bar up to. bar in zone or higher: C Connecting cables (by factory) cable capacitance: signal line/shield also signal line/signal line: 60 pf/m cable inductance: signal line/shield also signal line/signal line: µh/m DRUCK & TEMPERATUR Leitenberger GmbH Bahnhofstr. D 78 Kirchentellinsfurt GERMANY Tel. +49 (0) Fax +49 (0) E Mail: DT Info@Leitenberger.de temperatur.de
3 DMP Miscellaneous Option SIL according to IEC 6508 / IEC 65 Current consumption signal output current: max. 5 ma signal output voltage: max. 5 ma Weight approx. 40 g Installation position any Operational life > 00 x 0 6 pressure cycles CE conformity EMC Directive: 004/08/EC Pressure transmitters are calibrated in a vertical position with the pressure connection down. If this position is changed on installation there can be slight deviations in the zero point for pressure ranges P N bar. Wiring diagrams wire system (current) wire system (current / voltage) p supply + p supply + V S V S supply I supply I/U signal + A/V Pin configuration Electrical connection ISO 4400 Supply + Supply Signal + (for wire) Electrical connections (dimensions in mm) Binder 7 (5 pin) 4 Mx / metal (4 pin) Shield ground pin 5 4 field housing IN + IN OUT+ cable colours (DIN 4700) wh (white) bn (brown) gn (green) gn/ye (green / yellow) standard option ISO 4400 Binder Series 7 5 pin Mx 4 pin cable outlet with PVC cable (IP 65) (IP 67) (IP 67) (IP 67) 4 compact field housing cable outlet, cable with ventilation tube (IP 67) (IP 68) 5 universal field housing stainless steel.4404 (6 L) with cable gland M0x.5 (ordering code 880) and other versions on request 4 standard: m PVC cable without ventilation tube (permissible temperature: C) 5 different cable types and lengths available, permissible temperature depends on kind of cable DRUCK & TEMPERATUR Leitenberger GmbH Bahnhofstr. D 78 Kirchentellinsfurt GERMANY Tel. +49 (0) Fax +49 (0) E Mail: DT Info@Leitenberger.de temperatur.de
4 DMP Mechanical connections (dimensions in mm) standard for accuracy 0.5 / 0.5 % standard for accuracy 0. %; SIL and SIL IS version option G/" DIN 85 G/" DIN 85 with ISO 4400 with ISO 4400 G/" EN 87 G/" open port G/" DIN 85 with flush sensor G/4" DIN 85 G/4" EN 87 /" NPT /4" NPT metric threads and other versions on request This data sheet contains product specification, properties are not guaranteed. Subject to change without notice. DRUCK & TEMPERATUR Leitenberger GmbH Bahnhofstr. D 78 Kirchentellinsfurt GERMANY Tel. +49 (0) Fax +49 (0) E Mail: DT Info@Leitenberger.de temperatur.de
5 DMP DRUCK & TEMPERATUR LEITENBERGER GMBH Spezifikationsblatt / specification sheet DMP Messgröße Eingang Ausgang relativ absolut 0 [bar] 0, , , , , ,0 0 0,6 6 0, , , X 0 Sondermessbereiche ma / -Leiter 0 0 ma / -Leiter 0 0 V / -Leiter Ex-Schutz 4 0 ma / -Leiter SIL 4 0 ma / -Leiter SIL mit Ex-Schutz 4 0 ma / -Leiter Genauigkeit Standard für P N 0,4 bar Standard für P N < 0,4 bar Option für P N 0,4 bar Option Elektrischer Anschluss Stecker und Kabeldose ISO 4400 Stecker Binder Serie 7 (5-polig) Kabelausgang mit PVC-Kabel Kabelausgang Stecker Mx (4-polig) / Metall Kompakt-Feldgehäuse Edelstahl.405 Mechanischer Anschluss G/" DIN 85 G/" EN 87 G/4" DIN 85 G/4" EN 87 G/" DIN 85 mit quasi-frontbündiger Messzelle G/" DIN 85 offener Anschluss /" NPT /4" NPT Dichtung FKM EPDM NBR ohne (Schweißversion) Sonderausführungen Standard E S ES 0,5 % 0,5 % 5 0,5 % 0% 0, T A 0 T R 0 M F 0 0 Standard: m PVC-Kabel ohne Belüftungsschlauch (Temperatureinsatzbereich: C), auf Anfrage Kabel mit Luftschlauch (Code TR0 = PVC-Kabel), Kabel in verschiedenen Ausführungen und Längen lieferbar; Kabel nicht im Preis enthalten Schweißversion nur bei Anschlüssen nach EN 87 H 0 0 N 0 0 N DRUCK & TEMPERATUR Leitenberger GmbH Bahnhofstr. D 78 Kirchentellinsfurt GERMANY Tel. +49 (0) Fax +49 (0) E Mail: DT Info@Leitenberger.de temperatur.de nnen dem Datenblatt entnommen werden. Technische Änderungen vorbehalten. ieser Preisliste enthalten die Spezifikation der Produkte, nicht die Zusicherung von Eigenschaften. Ausführliche Informationen zu den Bestelloptionen kön Die Angaben die
DMK 331P DRUCK & TEMPERATUR LEITENBERGER GMBH. Industrial Pressure Transmitter. Pressure Ports With Flush Welded Stainless Steel Diaphragm
DRUCK & TEMPERATUR LEITENBERGER GMBH DMK P Industrial Pressure Transmitter Pressure Ports With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 60770: 0.5 % FSO Industrial Pressure Transmitter
MehrDMP 335. Industrial Pressure Transmitter. Welded, Dry Stainless Steel Sensor. accuracy according to IEC 60770: 0.5 % FSO.
DMP 5 Industrial Pressure Transmitter Welded, Dry Stainless Steel Sensor accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 6 bar up to 0... 600 bar Output signals -wire: 4... 0 ma -wire:
MehrDMP 331P DRUCK & TEMPERATUR LEITENBERGER GMBH. Industrial Pressure Transmitter
DRUCK & TEMPERATUR LEITENBERGER GMBH DMP P Industrial Pressure Transmitter Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 60770: standard:
MehrDS 201P DS 201P DRUCK & TEMPERATUR LEITENBERGER GMBH. Electronic. Pressure Switch. Pressure Port With Flush Welded Stainless Steel Diaphragm
DRUCK & TEMPERATUR LEITENBERGER GMBH DS 0P Electronic Pressure Switch Pressure Port With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 60770: 0. % FSO Electronic Pressure Switchter DS
MehrDMK 331. Industrie- Keramiksensor. Druckmessumformer. Genauigkeit nach IEC 60770: 0,5 % FSO
Industrie- Druckmessumformer Keramiksensor Genauigkeit nach IEC 60770: 0, % FSO Industrie- Druckmessumformer Nenndrücke: von 0... 00 mbar bis 0... 600 bar Ausgangssignale: -Leiter:... 0 ma -Leiter: 0 0
MehrDMP 331. Industrie- Druckmessumformer für Niederdruck. Edelstahlsensor. Genauigkeit nach IEC 60770: Standard: 0,35 % FSO Option: 0,25% / 0,1%FSO
DMP Industrie- Druckmessumformer für Niederdruck Edelstahlsensor Genauigkeit nach IEC 60770: : 0, % FSO Option: 0,% / 0,%FSO Nenndrücke von 0... 00 mbar bis 0... 60 bar Ausgangssignale -Leiter: 4... 0
MehrAnlagen- und Maschinenbau kundenspezifische Ausführungen Heizung, Lüftung, Klimatechnik
DMP 4 Industrie- Druckmessumformer Ohne Medientrennung Genauigkeit nach IEC 60770: 0,5 % FSO Nenndrücke von 0... 0 mbar bis 0... 000 mbar Besondere Merkmale sehr gute Linearität geringer Temperaturfehler
MehrDMK 331. IndustrieDruckmessumformer. Keramiksensor. Genauigkeit nach IEC 60770: 0,5 % FSO. TEMATEC GmbH. http: //
Postadresse: Postfach 6 Hausadresse: Löhestr. 7 79 Hennef 77 Hennef Telefon (+9) 0-87 0-0 Telefax (+9) 0-87 0-0 http: // www.tematec.de e-mail: team@ tematec.de Typenblatt Seite / IndustrieDruckmessumformer
MehrDMK 331. Industrie- Druckmessumformer. Keramiksensor. Genauigkeit nach IEC 60770: 0,5 % FSO
DMK Industrie- Druckmessumformer Keramiksensor Genauigkeit nach IEC 60770: 0,5 % FSO Nenndrücke von 0... 400 mbar bis 0... 600 bar Ausgangssignale -Leiter: 4... 0 ma -Leiter: 0 0 ma / 0 0 V auf Anfrage
MehrDMP 333. Industrie- Druckmessumformer für Hochdruck. Edelstahlsensor. Genauigkeit nach IEC 60770: Standard: 0,35 % FSO Option: 0,25 / 0,1 % FSO
DMP Industrie- Druckmessumformer für Hochdruck Edelstahlsensor Genauigkeit nach IEC 60770: Standard: 0,5 % FSO Option: 0,5 / 0, % FSO Nenndrücke Von 0... 00 bar bis 0... 600 bar Ausgangssignale -Leiter:...
MehrDMK 331P. Industrie- Druckmessumformer. Druckanschlüsse mit frontbündig verschweißter Edelstahlmembrane. Genauigkeit nach IEC 60770: 0,5 % FSO
DMK P Industrie- Druckmessumformer Druckanschlüsse mit frontbündig verschweißter Edelstahlmembrane Genauigkeit nach IEC 60770: 0,5 % FSO Nenndrücke von 0... 60 bar bis 0... 400 bar Ausgangssignale -Leiter:
MehrDMP 335. Industrie Druckmessumformer. verschweißter, ölfreier Edelstahlsensor. Genauigkeit nach IEC 60770: 0,5 % FSO
DMP 5 Industrie Druckmessumformer verschweißter, ölfreier Edelstahlsensor Genauigkeit nach IEC 60770: 0,5 % FSO Nenndrücke von 0... 6 bar bis 0... 600 bar Ausgangssignale -Leiter: 4... 0 ma -Leiter: 0
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
zwangsgesteuert force pilot operated Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Nennweite DN
MehrELMTEC. Drehzahlsensoren Speed Sensors 1 Kanal Hall Zoll Familie 1 Channel Hall Inch Type
Drehzahlsensoren Speed Sensors 1 Kanal Hall Zoll Familie 1 Channel Hall Inch Type Kurzdaten Versorgung Frequenzbereich Betriebstemperatur Schutzart (IEC 529) 0 15.000 Hz -40 +125 C IP67, IP69K Data summary
Mehrdiameter DN 2,0 6,0 0 max. 48bar (see table) body material brass, AISI 303, AISI 316
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Sitzventil Nennweite
MehrTechnisches Datenblatt Technical Data Sheet. Drehzahlsensoren / Speed Sensors 1 Kanal Hall M14 LD Familie 1 Channel Hall M14 LD Type
Drehzahlsensoren / Speed Sensors 1 Kanal Hall M14 LD Familie 1 Channel Hall M14 LD Type Kurzdaten Versorgung Frequenzbereich Betriebstemperatur Schutzart (IEC 529) 0 15.000 Hz -25 +85 C Data summary Power
Mehr0,5 max. 16bar (see table) body material brass, AISI 303, AISI 316
servogesteuert pilot operated Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Nennweite DN 13 50
MehrIDCT 531. Industrie- Druckmessumformer mit RS485 Modbus RTU. Edelstahlsensor. Genauigkeit nach IEC 60770: Standart: ± 0,35 % FSO Option: ± 0,25 % FSO
IDCT 5 Industrie- Druckmessumformer mit RS85 Modbus RTU Edelstahlsensor Genauigkeit nach IEC 60770: Standart: ± 0,5 % FSO Option: ± 0,5 % FSO Nenndrücke von 0... 00 mbar bis 0... 00 bar Ausgangssignal
MehrTECHNISCHE DATEN Drucksensor TECHNICAL DATA Pressure Sensor
TECHNISCHE DATEN Drucksensor TECHNICAL DATA Seite Modell Bauart Einstellbereiche Elektrischer Anschluß Page Model Design Setting range Electrical link 2 Typ 900 Drucksensor 0-1 bar, 0-10 bar, 0-100 bar,
MehrPU-06. Features. Druckmessumformer für allgemeine industrielle Anwendungen. Beschreibung: Anwendung:
PU-06 Druckmessumformer für allgemeine industrielle Anwendungen Beschreibung: Features / Genauigkeitsklasse bis 0,25 / Edelstahlsensor / Robuste Bauform / Hohe Präzision und Linearität / Gute Medienverträglichkeit
Mehr[82252] Druckmessumformer für gasförmige oder flüssige Medien DIGICONTROL F-SPT-U...
DIGICONTROL- Gerätedatenblatt F-SPT-U www.gfr.de [82252] Kategorie: Sensoren und Wächter Druckmessumformer für gasförmige oder flüssige Medien DIGICONTROL F-SPT-U... Anwendung Der Druckmessumformer F-SPT-U...
MehrDCT 531. Industrie- Druckmessumformer mit RS485 Modbus RTU. Edelstahlsensor. Genauigkeit nach IEC 60770: Standart: ± 0,35 % FSO Option: ± 0,25 % FSO
DCT 5 Industrie- Druckmessumformer mit RS85 Modbus RTU Edelstahlsensor Genauigkeit nach IEC 60770: Standart: ± 0,5 % FSO Option: ± 0,5 % FSO Nenndrücke von 0... 00 mbar bis 0... 00 bar Ausgangssignal RS85
Mehrdirektgesteuert direct acting
1 direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Kolbenventil Nennweite
MehrLMK 387. Edelstahl-Tauchsonde DRUCK & TEMPERATUR LEITENBERGER GMBH. Keramiksensor. Genauigkeit nach IEC 60770: Standard: 0,35 % FSO Option 0,25 % FSO
DRUCK & TEMPERATUR LEITENBERGER GMBH LMK 87 Edelstahl-Tauchsonde Keramiksensor Genauigkeit nach IEC 60770: Standard: 0,5 % FSO Option 0,5 % FSO Nenndrücke von 0... mh O bis 0... 00 mh O Ausgangssignale
MehrTechnisches Datenblatt Technical Data Sheet. Drehzahlsensoren Speed Sensors 1 Kanal Hall M18 Familie 1 Channel Hall M18 Type
Drehzahlsensoren Speed Sensors 1 Kanal Hall M18 Familie 1 Channel Hall M18 Type Kurzdaten Versorgung Frequenzbereich Betriebstemperatur Schutzart (IEC 529) 0 15.000 Hz -40 +125 C IP67, IP69K (siehe Typen)
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Sitzventil Nennweite
Mehrdirektgesteuert direct acting
1 direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Sitzventil Nennweite
MehrInhaltsverzeichnis Index
Inhaltsverzeichnis Index Typ Type Seite Page FDL 7-1 FDR 7-2 FMR 7-3 7-0-1 Zahnradmengenteiler Rotary geared flow divider Zahnradmengenteiler Typ FDL Rotary geared flow divider type FDL Technische Daten
MehrLMP 307 LMP 307. Edelstahl Tauchsonde mit Edelstahlsensor. Durchmesser: 27 mm Füllstandsmessung in Wasser Heiz und Dieselöl
mit Edelstahlsensor Durchmesser: 27 mm Füllstandsmessung in Wasser Heiz und Dieselöl Nenndruckbereiche von 0... mh 2 O bis 0... 250 mh 2 O (0... 00 mbar bis 0... 25 bar) geringer Temperaturfehler Die Tauchsonde
Mehrdirektgesteuert direct acting
1 direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Sitzventil Nennweite
MehrDMK 457 DMK 457. Druckmessumformer für Schifffahrt und Offshore
TEMATEC GmbH Postadresse: Hausadresse: Telefon (+49) 0 22 42-8703-0 Postfach 26 Löhestr. 37 Telefax (+49) 0 22 42-8703-20 http: // www.tematec.de 53759 Hennef 53773 Hennef e-mail: team@ tematec.de Typenblatt
MehrDMP 331P DMP 331P. Industrie- Druckmessumformer. verschweißter Edelstahlmembrane. Genauigkeit nach IEC 60770: Standard: 0,35 % FSO Option: 0,25 % FSO
DMP P Industrie- Druckmessumformer Druck- und Prozessanschlüsse mit frontbündig verschweißter Edelstahlmembrane Genauigkeit nach IEC 60770: : 0,5 % FSO Option: 0,5 % FSO Industrie- Druckmessumformer DMP
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Sitzventil Nennweite
MehrDatenblatt. Remote-I/O - u-remote UR20-4AO-UI or 4-wire connection; 16-bit resolution; 4 outputs
2- or 4-wire connection; 16-bit resolution; 4 outputs The analogue output module controls up to 4 analogue actuators with +/-10 V, +/-5 V, 0...10 V, 0...5 V, 2...10 V, 1...5 V, 0...20 ma or 4...20 ma with
Mehr2/2-way solenoid valve - Type 218
- direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Sitzventil Nennweite
Mehrdiameter DN 15 DN max. 25bar (see table) grey cast iron GG25, cast steel GS-C25N, stainless steel AISI 303
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Kolbenventil Nennweite
MehrTECHNISCHE DATEN Drucksensor TECHNICAL DATA Pressure Sensor
TECHNISCHE DATEN Drucksensor TECHNICAL DATA Seite Modell Bauart Einstellbereiche Elektrischer Anschluß Page Model Design Setting range Electrical link 2 Typ 900 Drucksensor 0-1 bar, 0-10 bar, 0-100 bar,
MehrIDG. Drehzahlsensor / Speed Sensor
Drehzahlen sicher erfassen, anzeigen und kontrollieren For reliable measurement, control and indication of rotational speeds Analogsignal 1-Kanal 1-channel analog signal IDG Drehzahlsensor / Speed Sensor
MehrDMP 331i / DMP 333i LMP 331 i
DMP i / DMP i LMP i Präzisions Druckmessumformer / Einschraubsonde Edelstahlsensor Genauigkeit nach IEC :, % FSO Nenndrücke von... mbar bis... bar Ausgangssignale Leiter:... ma Leiter:... V auf Anfrage
MehrIMP 331i IMP 333i ILMP 331i
IMP i IMP i ILMP i Präzisions Druckmessumformer / Einschraubsonde Edelstahlsensor Genauigkeit nach IEC 00: 0, % FSO Nenndrücke von 0... 00 mbar bis 0... 00 bar Ausgangssignale Leiter:... 0 ma Leiter: 0...
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Bauart Schnellentlüftungsventil Nennweite DN 2,0 2,5 Schnellentlüftung DN 6,0 Druckbereich Gehäusewerkstoff
MehrNon-incendive pressure transmitter For applications in hazardous areas Models N-10 and N-11
Electronic pressure measurement Non-incendive pressure transmitter For applications in hazardous areas Models N-10 and N-11 WIKA data sheet PE 81.26 Applications Gas compressors Flour mills Cement production
Mehr2/2-Wege Kunststoff-Magnetventil 2/2-way plastic solenoid valve. Baureihe 148 Type 148
direktgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Bauart Nennweite DN 2,0 8,0 Druckbereich Gehäusewerkstoff
Mehr2/2-way plastic solenoid valve - Type 110
- direktgesteuert mit Trennmembrane direct acting with isolating diaphragm Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Bauart Nennweite DN 2,0 6,0 Druckbereich Sitzventil
MehrCompressed air - dewpoint 10K under ambient temperature - ISO8573-1, Kl. 3 Durchflussrichtung Flow direction EIN: von 1-2 AUS: von 2 3
3/2 Wegeventil mit PIEZO-Pilotventil Baureihe P20 3/2 way valve with Piezo-pilot valve Series P20 P20 381RF-* NW 2 Eigenerwärmungsfrei Ein Produkt für alle Ex-Bereiche Kompatibel zu Microcontrollern Kompatibel
MehrBreaking load Nennlast Ln. Accuracy class Minimum division Safe load limit. Kleinster Teilungswert vmin. Genauigkeitsklasse n.
MODEL 740 100t... 600t Compression load cell, selfcentering column divisions OIML R60 class C Available in version (optional) Zone 0-1-2 (gas) and 20-21-22 (dust) Simple to install Stainless Steel construction
MehrPU-07. Features. Druckmessumformer mit Keramiksensor Klasse 0,5. Beschreibung: Anwendung:
PU-07 Druckmessumformer mit Keramiksensor Klasse 0,5 Beschreibung: Features / Hohe chemische Beständigkeit / Messzelle aus Keramik / Bis 600 bar / 4...20 ma oder 0...10 VDC / Schutzart IP 65 / IP 67 /
MehrSpecification. DESIGN Pressure actuated needle valve with electropneumatic. OPERATION Continuous control
Technische Daten BAUFORM Druckgesteuertes Nadelventil mit aufgebautem Stellungsregler PG01. Specification DESIGN Pressure actuated needle valve with electropneumatic positioner. Artikel: AND STEUERFUNKTIONEN
Mehr2/2-Wege Kunststoff-Magnetventil 2/2-way plastic solenoid valve. Baureihe 111 Type 111. direktgesteuert mit Trennmembrane flüssigkeitsgedämpft
direktgesteuert mit Trennmembrane flüssigkeitsgedämpft direct acting with isolating diaphragm fluid-damped Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Bauart Nennweite
MehrDGR CE SICHERHEITSVENTILE PED CE SAFETY VALVES
DGR CE SICHERHEITSVENTILE PED CE SAFETY VALVES Ecksicherheitsventile aus Rotguss mit Nirofeder Typ 606 GF/GFL/tGF für neutrale Flüssigkeiten,Dampf und gasförmige Medien Safety valves made of red brass
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
direktgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally
Mehr2/2-way plastic solenoid valve - Type 104
- direktgesteuert mit Trennmembrane direct acting with isolating diaphragm Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Bauart Nennweite DN 1,0 2,5 Druckbereich Gehäusewerkstoff
MehrBreaking load Nennlast Ln. Accuracy class Minimum division Safe load limit. Kleinster Teilungswert vmin. Genauigkeitsklasse n.
MODEL 740 15t... 60t Compression load cell, selfcentering column divisions O.I.M.L. R60 class C Available in version (optional) Zone 0-1-2 (gas) and 20-21-22 (dust) Simple to install Stainless steel construction
MehrP A max. 100bar A P max. 16bar
1 Schaltfunktion A: function A: direktgesteuert Modulbauweise NC (stromlos geschlossen) Schaltfunktion B: NC (normally closed) function B: NO (stromlos offen) NO (normally open) direct acting modular design
MehrBaureihe 269 Type /2-Wege Coaxialventil 2/2-way coaxial valve. direktgesteuert direct acting. diameter DN Nennweite DN 10 32
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 32 Druckbereich
MehrA P max. 16bar P R max. 64bar R P max. 16bar
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 50 Druckbereich
MehrDC/AC INVERTER 80VA. Eingangsspannungsbereich Input voltage range 11 14V DC
AC-RIDER 80VA WWW.AC-RIDER.COM TÜV Rheinland geprüfte Sicherheit Besondere Merkmale Features 12 VDC Eingang 12 VDC input Hoher Wirkungsgrad High efficiency Überlast / Kurzschlußfest Overload / Short-circuit
MehrBaureihe 464 Type Wege Kugelhahn pneumatisch betätigt 3-way ball valve pneumatic actuator
Bauart Nennweite DN 8 DN 50 Anschluss Kugelhahn mit pneumatischem Schwenkantrieb G1/4 G2 Betriebsdruck Messing: DN15 DN20 = PN30 DN25 = PN16 DN32 DN50 = PN10 Edelstahl: PN63 Gehäusewerkstoff Armatur: Edelstahl
MehrATEX-Check list. Compiled by: Date: Signature: Acceptable practice at the determination of flash point: Closed cup according to ISO 2719
Fire and explosion hazard ATEX 137 1999/92/EG und ATEX 95 2014/34/EU Danger assessment and determination of explosion protection zone for the test space as well as the installation site ATEX-Check list
Mehr~XECRO. sensing ahead NPN PNP 1/+ 1/+ NPN 4/S 4/S PNP. Data sheets are available on
~XECRO sensing ahead Benefits: Pressure proof up to 1000 bar (14503 psi) Stainless steel housing (SS304) Sensing face made of stainless steel or ceramic Optional LED switching indicator simplifies the
MehrInkrementale Drehgeber Ex-Schutzzulassung ATEX II 2 G Ex db e IIC T5/T6 Gb und IECEx Ex db e IIC T5/T6 Gb Impulse pro Umdrehung
Inkrementale Drehgeber Ex-Schutzzulassung ATEX II 2 G Ex db e IIC T5/T6 Gb und IECEx Ex db e IIC T5/T6 Gb 25...5000 Impulse pro Umdrehung EEx OG 9 - inkremental Merkmale Drehgeber Inkremental / ATEX /
Mehr2/2-Wege Coaxialventil 2/2-way coaxial valve. Baureihe 269 Type 269. direktgesteuert direct acting
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 32 Druckbereich
MehrKDS 400. Intelligenter elektronischer Druckschalter in Edelstahl-Ausführung. Edelstahlsensor
Intelligenter elektronischer Druckschalter in Edelstahl-Ausführung Edelstahlsensor Genauigkeit nach IEC 60770: Standard: 0,5 % FSO Option: 0,5 % FSO Nenndrücke von 0... 00 mbar bis 0... 600 bar Schaltausgänge
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
direktgesteuert direct acting Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Nennweite DN 1,7 Druckbereich Gehäusewerkstoff Dichtwerkstoff Sitzventil mit Handnotbetätigung
MehrDatenblatt. P-series PDU 2.5/4/4AN
Turn five into three that's the winning formula of the new P series with the PUSH IN connection system in which the pitches for 2.5, 4, 6 and 10 mm² are each combined in one terminal block. That means
MehrOvercurrent Protection Leaded Disks, Coated, 12 V, 24 V
B99* C 93 C 99 Applications Overcurrent and short-circuit protection b 3, max. Features Lead-free terminals Manufacturer s logo and type designation stamped on in white Low resistance For rated currents
MehrOverview thermostat/ temperature controller
Thermostat TR-238 The Thermostat TR-238 is a electronic two-level controller for controlling of and in climate control units and vehicles. Voltage range (12V): Voltage range (24V): Control range: Hystereses:
Mehrservogesteuert pilot operated
1 servogesteuert pilot operated Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: NO (stromlos offen) function B: NO (normally open) Bauart Sitzventil mit Membrandichtung
MehrDIGICONTROL- Gerätedatenblatt F-KCO2T1 2-Strahlverfahren, (nicht-dispersive Infrarot Technologie) NDIR
DIGICONTROL- Gerätedatenblatt F-KCO2T1 www.gfr.de [81221] Kategorie: Feldgeräte - Sensoren CO2- und Temperatur-Messumformer für Kanalmontage DIGICONTROL F-KCO2T1 Anwendung Der Messumformer F-KCO2T1 ist
MehrTECHNISCHE DATEN Leistungsrelais Zweispuliges TECHNICAL DATA Power Relay Dual-coil
TECHNISCHE DATEN Leistungsrelais Zweispuliges TECHNICAL DATA Power Relay Dual-coil Seite Modell Bauart Funktion Dauerstrom Elektrischer Anschluß Page Model Design Function Duty rating Electrical link 2-3
MehrIMK 331P. Industrie- Druckmessumformer. Druckanschlüsse mit frontbündig verschweißter Edelstahlmembrane. Genauigkeit nach IEC 60770: 0,5 % FSO
IMK P Industrie- Druckmessumformer Druckanschlüsse mit frontbündig verschweißter Edelstahlmembrane Genauigkeit nach IEC 60770: 0,5 % FSO Nenndrücke von 0... 60 bar bis 0... 400 bar Ausgangssignale -Leiter:
Mehr2/2-Wege Kunststoff-Magnetventil 2/2-way plastic solenoid valve. Baureihe 135 Type 135
zwangsgesteuert, flüssigkeitsgedämpft force pilot operated, fluid-damped Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Bauart Nennweite DN 15 50 Druckbereich Gehäusewerkstoff
MehrTachogeneratoren. Gehäuse ø95 mm, lagerlose Ausführung GTB 9. Merkmale. Kurze Reaktionszeit Leerlaufspannung mv pro U/min
Tachogeneratoren Einseitig offene Hohlwelle 12-16 mm oder Konuswelle 17 mm (1:10) Gehäuse 95 mm, lagerlose Ausführung Merkmale Kurze Reaktionszeit 10...60 mv pro U/min Einseitig offene Hohlwelle 12-16
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 10/2015
direktgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow Schaltfunktion A: NC (stromlos geschlossen) function A: NC (normally closed) Bauart Nennweite DN 15 50 Druckbereich Gehäusewerkstoff Dichtwerkstoff
Mehr2/2-way solenoid valve - Type 239
servogesteuert pilot operated Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Bauart Nennweite DN 10 40 Druckbereich Gehäusewerkstoff Messing Dichtw erkstoff Sitzventil mit
MehrDMP 331P. Industrie- Druckmessumformer. Prozessanschlüsse mit frontbündig verschweißter Edelstahlmembrane
DMP P Industrie- Druckmessumformer Prozessanschlüsse mit frontbündig verschweißter Edelstahlmembrane Genauigkeit nach IEC 60770: : 0,5 % FSO Option: 0,5 % FSO Nenndrücke von 0... 00 mbar bis 0... 0 bar
MehrInkrementale Drehgeber Durchgehende Hohlwelle ø30 bis ø45 mm Impulse pro Umdrehung
Inkrementale Drehgeber Durchgehende Hohlwelle ø30 bis ø45 mm 600...1200 Impulse pro Umdrehung Merkmale Durchgehende Hohlwelle ø30...45 mm Optisches Abtastprinzip Robustes Leichtmetall-Gehäuse Ausgangsstufe
MehrTechnische Daten / Technisches Merkblatt (nach pren ) ECHOGRAPH 1016B (Best.-Nr )
DISPLAY type of display CRT D10 size of display 72 x 60 grid 68 x 55 scale division coarse:10 fold ( and ) fine: 5 fold ( and ) acceleration voltage 10 kv MEASURING RANGES measuring length 0-100 mm; 0-500
MehrLMK 382 LMK 382 H LMK 382 / 382 H. Edelstahl Tauchsonde mit Keramiksensor
H mit Keramiksensor Durchmesser: 9,5 mm hydrostatische Füllstands messung in Abwasser und verschmutzten Medien Nenndruckbereiche von 0...40 cmh 2 O bis 0...00 mh 2 O (0...40 mbar bis 0...0 bar) geringer
MehrTechnisches Datenblatt Technical Data Sheet. Drehzahlsensoren Speed Sensors 1 Kanal Hall M18 Messing Familie 1 Channel Hall M18 Brass Type
Drehzahlsensoren Speed Sensors 1 Kanal Hall M18 Messing Familie 1 Channel Hall M18 Brass Type Kurzdaten Versorgung Frequenzbereich Betriebstemperatur Schutzart (IEC 529) 0 15.000 Hz -40 +125 C IP67 Data
MehrAccuracy class. Minimum division. Safe load Modell. Genauigkeitsklasse n. OIML. Kleinster Teilungswert vmin
MODEL 350 300kg... 5000kg Shear beam load cell Versions: - 350 i (300...5000kg): Fully Stainless Steel construction. Hermetically sealed, fully welded, IP 68 (EN 60529) and IP 69K (ISO 20653) - 350 a (300...5000kg):
MehrTechnisches Datenblatt Technical Data Sheet. Drehzahlsensoren Speed Sensors 1 Kanal Hall M14 Familie 1 Channel Hall M14 Type
Drehzahlsensoren Speed Sensors 1 Kanal Hall M14 Familie 1 Channel Hall M14 Type Kurzdaten Versorgung Frequenzbereich Betriebstemperatur Schutzart (IEC 529) 8 36 V DC 0 15.000 Hz -40 +125 C IP67, IP69K
MehrDIN EN form A 230V 50Hz, 24V DC, special voltages voltage tolerance + / - 10% acc. VDE 0580 power consumption 230V 50Hz: 6,5VA 24V DC: 5W
servogesteuert pilot operated Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Nennweite DN 15 50
MehrAccuracy class. Minimum division. Safe load Modell. Genauigkeitsklasse *n. OIML. Kleinster Teilungswert vmin
MODEL 340 15kg... 1500kg Bending beam load cell Fully Stainless Steel divisions OIML R60 class C * Hermetically sealed, fully welded Protected IP 68 (EN 60529) Available in version (optional) Zone 0-1-2
MehrZU Endlagenschalter, elektrisch für WA 131 / 131 H Limit Switch, Electrical, for WA 131 / 131 H.
ZU 0859 Endlagenschalter, elektrisch für WA 131 / 131 H Limit Switch, Electrical, for WA 131 / 131 H www.knick.de Bauart und Funktion Der Endlagenschalter ZU 0859 wandelt die pneumatischen Endlagen signale,
Mehr2/2-Wege Coaxialventil 2/2-way coaxial valve. Baureihe 270 / 271 / 272 Type 270 / 271 / 272. direktgesteuert direct acting. Nennweite DN 10 50
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 50 Druckbereich
MehrBenefits: Housings made of continuous stainless steel (SS304) including the sensing face Suitable for environments of heavy mechanical duty
~XECRO sensing ahead Benefits: ЍЍ Housings made of continuous stainless steel (SS304) including the sensing face ЍЍ Suitable for environments of heavy mechanical duty Vorteile: ЍЍ Durchgehendes Edelstahlgehäuse
MehrDMP 331i DMP 333i. Präzisions- Druckmessumformer. Edelstahlsensor. Genauigkeit nach IEC 60770: 0,1 % FSO
DMP i DMP i Präzisions Druckmessumformer Edelstahlsensor Genauigkeit nach IEC 600: 0, % FSO Nenndrücke von 0... 00 mbar bis 0... 600 bar Ausgangssignale Leiter:... 0 ma Leiter: 0... 0 V auf Anfrage Besondere
MehrTechnische Daten Technical specification
SHN9 Hall Drehzahlsensor Standard Hall Effect Speed Sensors Standard Technologie Technologie Messprinzip Princip of measurement Versorgung Power Supply Frequenzbereich Frequency range Hall Hall Hall-Effekt
MehrM12 Verteilerinsel / M12 Splitter box
Serie / Series VER 4-1 Technische Daten Technical data Norm Kabel ohne mit Standard Cable without with Polzahl Kontaktanforderung IEC 947-5-2 4/5 No. of contacts Contact configuration IEC 947-5-2 4/5 Verschmutzungsgrad
MehrTechnisches Datenblatt Technical Data Sheet. HySense PR 509
HySense PR 509 3403-xx-S-A1.37 Piezoresistiver Drucksensor Druckanschluss G 1/4 ISO 228 Kabel mit Rundsteckverbinder M16x0.75 Signalausgang 4 20 ma Piezoresistive pressure sensor Pressure connector G1/4
Mehrdirektgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow
1 direktgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow Schaltfunktion A: NC (stromlos geschlossen) function A: NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally
MehrDS 400 DS 400. Intelligenter, elektronischer Druckschalter komplett in Edelstahl-Ausführung
Postadresse: Hausadresse: Telefon (+49) 0 22 42-870-0 Postfach 26 Löhestr. 7 Telefax (+49) 0 22 42-870-20 http: // www.tematec.de 5759 Hennef 577 Hennef e-mail: team@ tematec.de Typenblatt DS400 Seite
MehrDMP 331 i DMP 333 i LMP 331 i
DMP i DMP i LMP i Präzisions Druckmessumformer / Einschraubsonde Edelstahlsensor DMP i DMP i LMP i Nenndrücke von 0... 00 mbar bis 0... 00 bar Ausgangssignale 2Leiter:... 20 ma Leiter: 0... 0 V auf Anfrage
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
direktgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally
MehrInduktive Näherungsschalter inductive proximity switches
Zylindrisch DC cylindric DC Zylindrisch DC Vollmetall cylindric DC full metal Hochtemperatur high temperature Schweißfest weld resistant Druckfest pressure resistant Analog analog Namur namur AC AC Kunststoff
MehrMagnetic inductive flow sensors
Magnetic inductive flow sensors Series induq VMI Advantages Robust metal housing Nominal pipe size ¼, ⅜ and ¾ Wide measuring range 1:6 (1:5) Frequency or analog and frequency output Delivery inlcuding
MehrISLIKER MAGNETE AG - CH-8450
GKu - Datenblätter GKu - Datasheets AG - CH-40 Andelfingen - Tel. +41 (0)2 30 2 2 - info@islikermagnete.ch - www.islikermagnete.ch GKu GKu Übersicht overview Übersicht / Overview Typ Type Dimensionen Dimensions
Mehr