INSTITUT FÜR AUTOMATISIERUNGSTECHNIK
|
|
- Dominik Kruse
- vor 5 Jahren
- Abrufe
Transkript
1 Publikationsbericht 2017 Institut für
2 INSTITUT FÜR AUTOMATISIERUNGSTECHNIK Universitätsplatz 2, Magdeburg Tel , Fax Leitung Prof. Dr.-Ing. Christian Diedrich (Geschäftsführender Leiter) Prof. Dr.-Ing. Rolf Findeisen Prof. Dr.-Ing. Achim Kienle Prof. Dr.-Ing. Ulrike Steinmann Hon. Prof. Dr.-Ing. Ulrich Jumar Jun.-Prof. Dr.-Ing. Stefan Palis 2. Veröffentlichungen Begutachtete Zeitschriftenaufsätze Fechtner, Marcus; Kienle, Achim Efficient simulation and equilibrium theory for adsorption processes with implicit adsorption isotherms - mass action equilibria In: Chemical engineering science - Amsterdam [u.a.]: Elsevier Science, Bd , S [Imp.fact.: 2,750] Geyyer, Rostyslav; Dürr, Robert; Temmel, Erik; Li, Tao; Lorenz, Heike; Palis, Stefan; Seidel-Morgenstern, Andreas; Kienle, Achim Control of continuous mixed-solution mixed-product removal crystallization processes In: Chemical engineering & technology: industrial chemistry, plant equipment, process engineering, biotechnology - Weinheim: Wiley-VCH Verl.-Ges, Bd , 7, S [Special issue: Industrial crystallization] Kishida, Masako; Kögel, Markus; Findeisen, Rolf Combined event- and self-triggered control approach with guaranteed finite-gain L 2 stability for uncertain linear systems In: IET control theory and applications - London: IET, Bd , 11, S [Imp.fact.: 2,536] Lucia, Sergio; Navarro, Denis; Lucia, Oscar; Zometa, Pablo; Findeisen, Rolf Optimized FPGA implementation of model predictive control for embedded systems using high level synthesis tool In: IEEE transactions on industrial informatics - New York, NY: IEEE, 2017; [Imp.fact.: 6,764] Matschek, Janine; Bullinger, Eric; Haeseler, Friedrich; Skalej, Martin; Findeisen, Rolf Mathematical 3D modelling and sensitivity analysis of multipolar radiofrequency ablation in the spine In: Mathematical biosciences - New York, NY: American Elsevier, Bd , S [Imp.fact.: 1,246] Neugebauer, Christoph; Palis, Stefan; Bück, Andreas; Tsotsas, Evangelos; Heinrich, Stefan; Kienle, Achim 1
3 A dynamic two-zone model of continuous fluidized bed layering granulation with internal product classification In: Particuology - Amsterdam: Elsevier, Bd , S [Imp.fact.: 2,280] Potluri, Sasanka; Diedrich, Christian Deep feature extraction for multi-class intrusion detection in industrial control systems In: International Journal of Computer Theory and Engineering: IJCTE - Singapore: International Association of Computer Science and Information Technology Press (IACSIT Press), Bd , 5, S Scholz, André; Hildebrandt, Constantin; Fay, Alexander; Schrüder, Tizian; Diedrich, Christian; Dubovy, Martin; Eck, Christian; Wiegand, Ralf; Heidel, Roland Semantische Inhalte für Industrie Modellierung technischer Systeme in kollaborativen Umgebungen In: Atp-Edition: automatisierungstechnische Praxis: Organ der GMA (VDI-VDE-Gesellschaft Meß- und ) und der NAMUR (Interessengemeinschaft der Prozessindustrie) - München: DIV Dt. Industrieverl, Bd , 7/8, S Seidel, Carsten; Jörke, A.; Vollbrecht, B.; Seidel-Morgenstern, Andreas; Kienle, Achim Kinetic modeling of methanol synthesis from renewable resources In: Chemical engineering science - Amsterdam [u.a.]: Elsevier Science, Bd , S [Online first] [Imp.fact.: 2,895] Begutachtete Buchbeiträge Bück, Andreas; Schmidt, Martin; Neugebauer, Christoph; Palis, Stefan; Kienle, Achim; Heinrich, Stefan; Tsotsas, Evangelos Process dynamics of continuous fluidised bed layering granulation In: 8th International Granulation Workshop: Sheffield, UK, June Sheffield, Posternr. 2, paper 67, insgesamt 5 Seiten [Beitrag auf USB-Stick] Diedrich, Christian; Hadlich, Thomas; Thron, Mario Semantik durch Merkmale für Industrie 4.0 In: Handbuch Industrie 4.0: Bd. 2: Automatisierung - Berlin: Springer Vieweg, S , 2017 Diedrich, Christian; Riedl, Matthias Integration von Automatisierungsgeräten in Industrie-4.0-Komponenten In: Handbuch Industrie 4.0: Bd. 2: Automatisierung - Berlin: Springer Vieweg, S , 2017 Diedrich, Christian; Schröder, Tizian; Riedl, Matthias Kommunikationskonzept von NAMUR Open Architecture - NOA In: "Kommunikation in der Automation": 8. Jahreskolloquium KommA 2017, Magdeburg: ifak Institut für Automation und Kommunikation e.v., 2017, paper 126, insgesamt 15 Seiten [Kolloquium: KommA 2017] Keßler, Tobias; Kunde, Christian; Mertens, Nick; Michaels, Dennis; Kienle, Achim Global optimization of distillation columns using surrogate models In: Evolutionary and deterministic methods for design optimization and control with applications to industrial and societal problems: Sep 13-15, 2017 in Madrid, Spain; EUROGEN 2017; Book of abstracts: Sep 13-15, 2017 in Madrid, Spain: EUROGEN 2017; Book of abstracts - Madrid: Technical University, 2017, paper 041, insgesamt 7 Seiten [Vollständiger Beitrag auf USB-Stick.] Keßler, Tobias; Mertens, Nick; Kunde, Christian; Nentwich, Corina; Michaels, Dennis; Kienle, Achim Efficient global optimization of a novel hydroformylation process 2
4 In: 27th European symposium on computer aided process engineering: Barcelona from 1-5 October Amsterdam: Elsevier, S [Konferenz: ESCAPE 2017] Kishida, Masako; Kögel, Markus; Findeisen, Rolf Event-triggered actuator signal update using self-triggered sampled data for uncertain linear systems In: 2017 American Control Conference (ACC): May [Piscataway, NJ]: IEEE, S Krüger, Jacob; Nielebock, Sebastian; Krieter, Sebastian; Diedrich, Christian; Leich, Thomas; Saake, Gunter; Zug, Sebastian; Ortmeier, Frank Beyond software product lines - variability modeling in cyber-physical systems In: Proceedings of the 21th International Software Product Line Conference. Volume A: SPLC 2017, Sevilla, Spain,September 25-29, New York: ACM, S [Konferenz: 21th International Software Product Line Conference, SPLC 2017, Sevilla, Spain,September 25-29, 2017] Lucia, Sergio; Paulson, Joel A.; Findeisen, Rolf; Braatz, Richard D. On stability of stochastic linear systems via polynomial chaos expansions In: 2017 American Control Conference (ACC): May [Piscataway, NJ]: IEEE, S Lucia, Sergio; Torchio, Marcello; Raimondo, Davide M.; Klein, Reinhardt; Braatz, Richard D.; Findeisen, Rolf Towards adaptive health-aware charging of Li-ion batteries - a real-time predictive control approach using firstprinciples models In: 2017 American Control Conference (ACC): May [Piscataway, NJ]: IEEE, S Möhring, Hans-Christian; Edner, Falco; Neu, Alexander Mechatronisches Therapie- und Reha-Assistenzsystem In: Smarte Strukturen und Systeme: Tagungsband des 4SMARTS-Symposiums, Juni 2017, Braunschweig - Aachen: Shaker Verlag, S [Symposium: 4SMARTS-Symposiums, Braunschweig, Juni 2017] Morabito, Bruno; Klein, Reinhardt; Findeisen, Rolf Real time feasibility and performance of moving horizon estimation for Li-ion batteries based on first principles electrochemical models In: 2017 American Control Conference (ACC): May [Piscataway, NJ]: IEEE, S Herausgeberschaften Jumar, Ulrich ; Jasperneite, J. "Kommunikation in der Automation" - 8. Jahreskolloquium KommA 2017, Magdeburg ifak Institut für Automation und Kommunikation e.v., 2017, 1 USB-Stick, ISBN ; Kongress: Jahreskolloquium "Kommunikation in der Automation" 8 (Magdeburg: ) [Veranstaltungsort: Magdeburg; Vollständige Papers auf dem USB-Stick, Abstracts in der Beilage] Abstracts Kondragunta, Jyothsna; Potluri, Sasanka Early identification of complex foot problems with adaptive artificial intelligence In: International Healthcare Vision 2037: new technologies, educational goals and entrepreneurial challenges; proceedings + summary of the 5th BME-IDEA EU Conference; June 2017, Magdeburg, Germany - Magdeburg: 3
5 Universitätsbibliothek, S Habilitationen Streif, Stefan; Findeisen, Rolf [AkademischeR BetreuerIn] Estimation, fault diagnosis and control of uncertain nonlinear systems In: Magdeburg, 2017, 348 Seiten, Illustrationen, Diagramme, 21 cm [Es handelt sich um eine kumulative Schrift, die aus 15 Artikeln und einer vorangestellten Einleitung besteht.] Dissertationen Hahn, Stefan; Jumar, Ulrich [AkademischeR BetreuerIn] Methoden zur nichtlinearen modellbasierten Spurführung benutzerdefinierter Punkte an der Fahrzeugfront. - Aachen Shaker Verlag, 2017, XIX, 212 Seiten, 81 Illustrationen, Diagramme, 21 cm, 350 g - (Berichte aus der Steuerungs- und Regelungstechnik), ISBN ; [Literaturverzeichnis: Seite ] Kazim, Khalid J.; Findeisen, Rolf [GutachterIn]; Ortmeier, Frank [GutachterIn] Towards a unified approach for path-following and force-feedback using nonlinear model predictive control. - Magdeburg, 2017, v, VIII, 120 Seiten, Illustrationen [Abweichendes Erscheinungsjahr auf der Titelseite: 2016] Kunde, Christian; Kienle, Achim [GutachterIn]; Seidel-Morgenstern, Andreas [GutachterIn] Global optimization in conceptual process design. - Magdeburg, 2017, i, 123 Seiten, Illustrationen [Literaturverzeichnis: Seite ] Menendez Zometa, Juan Pablo; Findeisen, Rolf [GutachterIn] Code generation for model predictive control of embedded systems. - Magdeburg, 2017, XII, 124 Seiten, Illustrationen [Literaturverzeichnis: Seite ] Oseev, Aleksandr; Steinmann, Ulrike [AkademischeR BetreuerIn] SAW based phononic crystal microfluidic sensor platform. - Magdeburg, 2017, xvii, 139 Seiten, Illustrationen [Literaturverzeichnis: Seite ] Santos da Silva, Francisco Vitor; Kienle, Achim [AkademischeR BetreuerIn]; Seidel-Morgenstern, Andreas [AkademischeR BetreuerIn] Analysis and design of center-cut separations using 8-zone simulated moving bed chromatography. - Magdeburg, 2017, 161 Seiten, Illustrationen, Diagramme, 30 cm [Literaturverzeichnis: Seite ] Savchenko, Anton Efficient set-based process monitoring and fault diagnosis. - Aachen Shaker Verlag 2017, VI, 120 Seiten, Illustrationen, Diagramme, 21 cm, 195 g - (Contributions in systems theory and automatic control; Band 7), ISBN ; [Literaturverzeichnis: Seite ] Wisniewski, Lukasz; Diedrich, Christian [GutachterIn] New methods to engineer and seamlessly reconfigure time triggered Ethernet based systems during runtime based on the PROFINET IRT example. - Berlin Springer Vieweg, 2017, XIX, 200 Seiten, Illustrationen, Diagramme, 24 cm - (Technologien für die intelligente Automation; Band 6), ISBN ; [Literaturverzeichnis: Seite ] 4
Sarmadi@kntu.ac.ir P- hdoroodian@gmail.com. shafaei@kntu.ac.ir BPOKM. 1 Business Process Oriented Knowledge Management
Sarmadi@kntu.ac.ir P- hdoroodian@gmail.com shafaei@kntu.ac.ir -. - 1 Business Process Oriented Knowledge Management 1 -..» «.. 80 2 5 EPC PC C EPC PC C C PC EPC 3 6 ; ; ; ; ; ; 7 6 8 4 Data... 9 10 5 -
MehrIndustrie 4.0 Predictive Maintenance. Kay Jeschke SAP Deutschland AG & Co. KG., Februar, 2014
Industrie 4.0 Predictive Maintenance Kay Jeschke SAP Deutschland AG & Co. KG., Februar, 2014 Anwendungsfälle Industrie 4.0 Digitales Objektgedächtnis Adaptive Logistik Responsive Manufacturing Intelligenter
MehrDetermining Vibro-Acoustic Effects in Multidomain Systems using a Custom Simscape Gear Library
Determining Vibro-Acoustic Effects in Multidomain Systems using a Custom Simscape Gear Library Tim Dackermann, Rolando Dölling Robert Bosch GmbH Lars Hedrich Goethe-University Ffm 1 Power Noise transmission
MehrVorlesung Automotive Software Engineering Prüfung Sommersemester 2015
Vorlesung Automotive Software Engineering Prüfung Sommersemester 2015 Prof. Dr. rer. nat. Bernhard Hohlfeld Bernhard.Hohlfeld@mailbox.tu-dresden.de Technische Universität Dresden, Fakultät Informatik Honorarprofessur
MehrVorlesung Automotive Software Engineering Prüfung Wintersemester 2014/15 TU Darmstadt, FB 18 und FB 20
Vorlesung Automotive Software Engineering Prüfung Wintersemester 2014/15 TU Darmstadt, FB 18 und FB 20 Prof. Dr. rer. nat. Bernhard Hohlfeld Bernhard.Hohlfeld@mailbox.tu-dresden.de Technische Universität
MehrIntelligente Vernetzung für die Produktionstechnik von morgen. Teil 2. Prof. Dr.-Ing. Jürgen Jasperneite
Intelligente Vernetzung für die Produktionstechnik von morgen Teil 2 Prof. Dr.-Ing. Jürgen Jasperneite Fraunhofer-Anwendungszentrum Industrial Automation (IOSB-INA) Langenbruch 6, D-32657 Lemgo IHK meets
MehrTechnische Universität Kaiserslautern Lehrstuhl für Virtuelle Produktentwicklung
functions in SysML 2.0 La Jolla, 22.05.2014 12/10/2015 Technische Universität Kaiserslautern Lehrstuhl für Virtuelle Produktentwicklung Dipl. Wirtsch.-Ing. Christian Muggeo Dipl. Wirtsch.-Ing. Michael
MehrZeitschriften Maschinenbau
Regal 12b Abhandlungen aus dem Aerodynamischen Institut der Rhein.-Westf. 1.1921-33.1998, 35.2012 Lücke [N=34] Technischen Hochschule Aachen American Scientist 43.1955 87.1999 Lücke [N=85] Angewandte Chemie
MehrWE SHAPE INDUSTRY 4.0 BOSCH CONNECTED INDUSTRY DR.-ING. STEFAN AßMANN
WE SHAPE INDUSTRY 4.0 BOSCH CONNECTED INDUSTRY DR.-ING. STEFAN AßMANN Bosch-Definition for Industry 4.0 Our Seven Features Connected Manufacturing Connected Logistics Connected Autonomous and Collaborative
MehrSARA 1. Project Meeting
SARA 1. Project Meeting Energy Concepts, BMS and Monitoring Integration of Simulation Assisted Control Systems for Innovative Energy Devices Prof. Dr. Ursula Eicker Dr. Jürgen Schumacher Dirk Pietruschka,
MehrFuture Network-based Semantic Technologies FUNSET Science
AUTOMATION & CONTROL INSTITUTE INSTITUT FÜR AUTOMATISIERUNGS- & REGELUNGSTECHNIK Future Network-based Semantic Technologies FUNSET Science Munir Merdan und Reinhard Grabler Sparkling Science Kongress Workshop
MehrLiteratur Glas Grundlagen
Literatur Glas Grundlagen Grundlagen, Eigenschaften: [Gla- 1] Scholze H. Glas Natur, Struktur und Eigenschaften Springer Verlag, 1988, 342 S. ISBN 3-540- 08403-7 [Gla- 2] Vogel W. Glaschemie Springer Verlag,
MehrEngineering the Factory of the Future Now.Next.Beyond. Heiko Schwindt VP Automation & Electrification Solutions, Bosch Rexroth
Engineering the Factory of the Future Now.Next.Beyond. Heiko Schwindt VP Automation & Electrification Solutions, Bosch Rexroth Connect on LinkedIn www.linkedin.com/in/heiko-schwindt-625039140/ 1 "The challenge
MehrEn:Tool EnEff BIM Introduction to the Project and Research Association
En:Tool EnEff BIM Introduction to the Project and Research Association Christoph van Treeck 1 Lehrstuhl für Energieeffizientes Bauen (E3D), RWTH Aachen University, Germany EnTool: EnEff:BIM»Planning, system
MehrPrivacy-preserving Ubiquitous Social Mining via Modular and Compositional Virtual Sensors
Privacy-preserving Ubiquitous Social Mining via Modular and Compositional s Evangelos Pournaras, Iza Moise, Dirk Helbing (Anpassung im Folienmaster: Menü «Ansicht» à «Folienmaster») ((Vorname Nachname))
MehrGesellschaft für Informatik e.v. (GI) Institute of Electrical and Electronics Engineers (IEEE)
Dr. Markus Debusmann Kontakt: E-mail: debusmann@informatik.fh-wiesbaden.de Mitgliedschaften: Gesellschaft für Informatik e.v. (GI) Institute of Electrical and Electronics Engineers (IEEE) Beteiligung an
MehrMaster-Studiengang & Bewerbung/Zulassung. Judith Zimmermann Studienkoordinatorin, Departement Informatik, ETH Zürich
Master-Studiengang & Bewerbung/Zulassung Judith Zimmermann Studienkoordinatorin, Departement Informatik, ETH Zürich Master's in Data Science 120 Core Courses 62 Data Analysis 16 Information and Learning
MehrZeitschriften Maschinenbau
Regal 12b Abhandlungen aus dem Aerodynamischen Institut der Rhein.-Westf. 1.1921-33.1998, 35.2012 Lücke [N=34] Technischen Hochschule Aachen American Scientist 43.1955 87.1999 Lücke: [N=85] Angewandte
MehrLarge Scale Data Management
Large Scale Data Management Beirat für Informationsgesellschaft / GOING LOCAL Wien, 21. November 2011 Prof. Dr. Wolrad Rommel FTW Forschungszentrum Telekommunikation Wien rommel@ftw.at Gartner's 2011 Hype
MehrEffizienzsteigerung durch modellbasierte Optimierung und Regelung von Biogasanlagen
Fachhochschule Köln Campus Gummersbach Effizienzsteigerung durch modellbasierte und von Biogasanlagen Daniel Gaida, M.Sc. & Dipl.-Ing. Christian Wolf Offenburg, 27.10.2011 GECO C Gummersbach Environmental
MehrNOA NAMUR Open Architecture
NOA NAMUR Open Architecture Erweiterung der bestehenden Ansätze als Grundlage für die effiziente und flexible Umsetzung von Industrie 4.0 in der Prozessindustrie Additiv zu bisherigen Strukturen Offen
MehrDas digitale Unternehmen in der Prozessindustrie
Das digitale Unternehmen in der Prozessindustrie SIMATIC PCS 7 V9.0 Innovation Tour siemens.com Digitalisierung verändert alles Seite 2 Seite 3 Quelle: VDI Industrie 4.0 Wie steht Deutschland heute da?
MehrTH Köln Institute of Agricultural Engineering and Renewable Energies. TU-Dresden Chair of Agricultural Systems and Technology
TH Köln Institute of Agricultural Engineering and Renewable Energies TU-Dresden Chair of Agricultural Systems and Technology Contributing Project Partners: Slide 1 AGENDA 1. Complexity of AG Processes
MehrProf. Dr. rer. nat. Detlev Doherr
Prof. Dr. rer. nat. Detlev Doherr Funktion Energiesystemtechnik ES, Studiendekan/in der Bachelor-Studiengänge Schwerpunkt Energietechnik, Programmverantwortliche/r Fakultät Maschinenbau und Verfahrenstechnik
MehrAdvanced Business Intelligence. Advanced Networking. Artificial Intelligence. Campus Offenburg Badstraße 24, 77652
Advanced Business Intelligence Prerequisite english description Hours 4.0 Praktikum Data Mining Nr. E+I2118 Data Mining Nr. E+I2117 Advanced Networking Hours 4.0 Advanced Networking Nr. E+I2103 Praktikum
MehrIntegrated result data management in the development process of vehicle systems based on the ASAM ODS standard
Integrated result data management in the development process of vehicle systems based on the ASAM ODS standard Dipl.-Ing. (FH) Stefan Geneder, Technische Hochschule Ingolstadt Dr. Felix Pfister, AVL List,
MehrSecurity for Safety in der Industrieautomation Konzepte und Lösungsansätze des IEC 62443
Security for Safety in der Industrieautomation Konzepte und Lösungsansätze des IEC 62443 Roadshow INDUSTRIAL IT SECURITY Dr. Thomas Störtkuhl 18. Juni 2013 Folie 1 Agenda Einführung: Standard IEC 62443
MehrOptimale Regelung der Substratzufuhr von landwirtschaftlichen Biogasanlagen
Fachhochschule Köln Campus Gummersbach ifak Workshop: Steuerung, und Simulation von Biogasanlagen Optimale der Substratzufuhr von landwirtschaftlichen Biogasanlagen Daniel Gaida, M.Sc. & Dipl.-Ing. Christian
MehrDurchgängige Anlagenplanung Integrated Plant Engineering
Gesellschaft für Mess- und Automatisierungstechnik VDI-Bezirksverein Bayern Nordost e.v. / VDE-Bezirksverein Nordbayern e.v. Durchgängige Anlagenplanung Integrated Plant Engineering Dipl.-Ing. Matthias
MehrFAKULTÄT FÜR ELEKTROTECHNIK UND INFORMATIONSTECHNIK
Publikationsbericht 2017 FAKULTÄT FÜR ELEKTROTECHNIK UND INFORMATIONSTECHNIK Universitätsplatz 2, 39106 Magdeburg Tel. +49 (0)391 67 58641, Fax +49 (0)391 67 12287 feit@ovgu.de http://www.feit.ovgu.de
MehrIndustrie 4.0 The Impact of Digitization on Sustainable Value Creation
Industrie 4.0 The Impact of Digitization on Sustainable Value Creation INTANGIBLES: THE EUROPEAN STATE OF THE ART 2nd International Policy Conference Frankfurt am Main, 12. September 2017 Professor Dr.
MehrRegelung der Substratzufuhr von Biogasanlagen Ein Review
Workshop Steuerung, Regelung und Simulation von Biogasanlagen Regelung der Substratzufuhr von Biogasanlagen Ein Daniel Gaida, Christian Wolf, Michael Bongards daniel.gaida@fh-koeln.de Leipzig, 28.05.2013
MehrPublications Dr. Geiger (23.01.2009)
Publications Dr. Geiger (23.01.2009) Geiger, G. (1982): Monitoring of an Electrical Driven Pump Using Continuous-Time Parameter Estimation Methods. IFAC-Symposium on Identification and System Parameter
MehrMsc. Courses at the IST
Universitat Stuttgart Institute for Theory and Automatic Prof. Dr. Ing. Frank Allgöwer Msc. Courses at the IST In the following -grouped according to study programs- modules in Master of Science programs
MehrBuilding management and Online simulation of buildings
Building management and Online simulation of buildings Prof. Dr. Ursula Eicker University of Applied Sciences Stuttgart Research Centre Sustainable Energy Technologies Page 1 Energy consumption control
MehrEuropean Qualification Strategies in Information and Communications Technology (ICT)
European Qualification Strategies in Information and Communications Technology (ICT) Towards a European (reference) ICT Skills and Qualification Framework Results and Recommendations from the Leornardo-da-Vinci-II
MehrAdvanced Receiver Structures for Vehicular Communications
Advanced Receiver Structures for Vehicular Communications von der Fakultät für Elektrotechnik und Informationstechnik der Technischen Universität Dortmund genehmigte Dissertation zur Erlangung des akademischen
Mehrjasimasolutions Simulation based process optimization for the agri food sector jasimabeverageplanner jasima Solutions Spin Off from
jasima Solutions Spin Off from BIBA - Bremer Institut für Produktion und Logistik GmbH Simulation based process optimization for the agri food sector jasimabeverageplanner Torsten Hildebrandt Torsten.Hildebrandt@.de
MehrIndustrial USB3.0 Miniature Camera with color and monochrome sensor
Welcome to the presentation Industrial USB3.0 Miniature Camera with color and monochrome sensor & Data rates of modern image sensors S. 1/12 Vortrag_Spectronet_USB3.0_Datenverarbeitung_ENGLISCH_Vorlage_für_pdf_v1_MH20032014
MehrAhamed Bilal Asaf Ali (Autor) Design Rules for Permanent Magnet Synchronous Machine with Tooth Coil Winding Arrangement
Ahamed Bilal Asaf Ali (Autor) Design Rules for Permanent Magnet Synchronous Machine with Tooth Coil Winding Arrangement https://cuvillier.de/de/shop/publications/6738 Copyright: Cuvillier Verlag, Inhaberin
MehrMathematische Verfahren zur Unterstützung der Rettungsdienstplanung
Mathematische Verfahren zur Unterstützung der Rettungsdienstplanung Melanie Reuter-Oppermann, Peter Hottum KARLSRUHE SERVICE RESEARCH INSTITUTE (KSRI) KIT The Research University in the Helmholtz Association
MehrKursbeschreibungen Wahlpflichtfächer Design
IMW5.1 Human Machine Interface -Exploring the design disciplines involved in HMI systems (industrial and interaction design) to understand their interdependences as well as their role in the design of
MehrPLM Software und Industrie 4.0 ACAM Kundentag 2014
Hermann Kaineder, 22. Mai 2014 PLM Software und Industrie 4.0 ACAM Kundentag 2014 Frei verwendbar / Siemens AG 2014. Alle Rechte vorbehalten. Answers for industry. Herzlich willkommen beim ACAM Kundentag
MehrAtline Inspection of Casting Production Process at Volkswagen using VG Inline
Atline Inspection of Casting Production Process at Volkswagen using VG Inline Atline Inspection of Casting Production Process at Volkswagen using VG Inline Authors: Dr.-Ing. Raimund Rösch, Frank Jeltsch
MehrApplication Requirements Engineering
Application Requirements Engineering - Fokus: Ableitung von Produktanforderungen - Günter Halmans / Prof. Dr. Klaus Pohl Software Systems Engineering ICB (Institute for Computer Science and Business Information
MehrBachelor-Seminar Eingebettete Interaktive Systeme. Farming 4.0: Agriculture in the Context of Digitalization
Bachelor-Seminar Eingebettete Interaktive Systeme Farming 4.0: Agriculture in the Context of Digitalization Prof. Dr. Matthias Kranz 2 Overiew 1. Administrative Organisation 3 5801S Bachelorseminar Embedded
Mehr3. GI-Workshop EPK 2004 Geschäftsprozessmanagement mit Ereignisgesteuerten Prozessketten Luxemburg. ARIS meets RUP
3. GI-Workshop EPK 2004 Geschäftsprozessmanagement mit Ereignisgesteuerten Prozessketten Luxemburg ARIS meets RUP Der ARIS Unified Information System Development Process Martin Plümicke Berufsakademie
MehrSmart Cities. Deutsch-Chinesischer Workshop
Deutsch-Chinesischer Workshop Smart Cities STUTTGART WILLI-BLEICHER-STR. 20 GEWERKSCHAFTSHAUS KONFERENZRAUM 3+4 18. APRIL 2018, 09.30-16:30 UHR 19. APRIL 2018, 09:00-13:30 UHR Deutsch-Chinesischer Workshop
MehrPressekonferenz SPS IPC Drives 2014
Ralf-Michael Franke, CEO Factory Automation Pressekonferenz SPS IPC Drives 0 siemens.com/sps-messe Die Division Digital Factory im Überblick Digital Factory Division: CEO Anton S. Huber Factory Automation
MehrModel-based Development of Hybrid-specific ECU Software for a Hybrid Vehicle with Compressed- Natural-Gas Engine
Model-based Development of Hybrid-specific ECU Software for a Hybrid Vehicle with Compressed- Natural-Gas Engine 5. Braunschweiger Symposium 20./21. Februar 2008 Dipl.-Ing. T. Mauk Dr. phil. nat. D. Kraft
MehrVorwort. Tag des Systems Engineering. The Value of Systems Engineering - Der Weg zu den technischen Systemen von morgen
Vorwort Tag des Systems Engineering The Value of Systems Engineering - Der Weg zu den technischen Systemen von morgen Herausgegeben von Maik Maurer, Sven-Olaf Schulze ISBN (Buch): 978-3-446-43915-3 ISBN
MehrMODELLING AND CONTROLLING THE STEERING FORCE FEEDBACK USING SIMULINK AND xpc TARGET
MODELLING AND CONTROLLING THE STEERING FORCE FEEDBACK USING SIMULINK AND xpc TARGET Dipl.-Ing. M. Brünger-Koch, 05/06/09 Model-Based Design Conference 2005 1 Agenda 1. Introduction Company and institute
Mehr«Roboter verlassen die Produktionshallen»
Shaping the future «Roboter verlassen die Produktionshallen» Prof. Dr. Roland Siegwart www.asl.ethz.ch www.wysszurich.ch Berufslandschaft der Zukunft Zurich, 26 April, 2017 Roland Siegwart 26.04.2017 1
MehrA Brief Introduction to Functional Safety
Who Am I? Name: Profession: Department: Field of Work: Background: Research: Email: Uwe Creutzburg Professor at University of Applied Sciences, Stralsund, Germany Electrical Engineering and Computer Science
MehrInternetkompetenzzentrum Mobile Business & Social Media
Dr. Max Mustermann Referat Kommunikation & Marketing Verwaltung Internetkompetenzzentrum Mobile Business & Social Media Team, Themen & Kooperationen Prof. Dr. Bernd Heinrich Lehrstuhl für Wirtschaftsinformatik
MehrUntersuchung von Beschleunigungsverfahren für den Dijkstra-Algorithmus im Zusammenhang mit multimodalem Routing
Untersuchung von Beschleunigungsverfahren für den Dijkstra-Algorithmus im Zusammenhang mit multimodalem David Georg Reichelt davidgeorg_reichelt@yahoo.de 22. September 2012 25.09.2012 David Georg Reichelt,
MehrAnforderungen zur Entwicklung von E-CAD-Systemen
Deutsche Kommission Elektrotechnik Elektronik Informationstechnik im DIN und VDE DKE/K113 Produktdatenmodelle, Informationsstrukturen, Dokumentation und graphische Symbole Oktober 2007 Anforderungen zur
MehrTechnologien für die intelligente Automation
Technologien für die intelligente Automation Technologies for Intelligent Automation Band 5 Weitere Bände in dieser Reihe http://www.springer.com/series/13886 Ziel der Buchreihe ist die Publikation neuer
MehrGeorg Güntner (Salzburg Research) Kick-Off der IoT-Group Salzburg IoT-Talks Salzburg: Mai 2015
Georg Güntner (Salzburg Research) Kick-Off der IoT-Group Salzburg IoT-Talks Salzburg: Mai 2015 Techno-Z Salzburg, Veranstaltungszentrum, 19.05.2015 Agenda Welcome IoT-Talks Talk 1: "Architekturen für das
MehrLaserinduzierte Phasenumwandlung in Ge-Sb-Te Verbindungen für die hochdichte optische Datenspeicherung
Laserinduzierte Phasenumwandlung in Ge-Sb-Te Verbindungen für die hochdichte optische Datenspeicherung Von der Fakultät für Elektrotechnik und Informationstechnik der Rheinisch-Westfälischen Technischen
MehrFolien zur Vorlesung. Zeitreihenanalyse (Time Series Analysis)
Folien zur Vorlesung Zeitreihenanalyse (Time Series Analysis) Wintersemester 2014/2015 Mittwoch 14.00 15.30 Uhr Hörsaal: J 498 Prof. Dr. Bernd Wilfling Westfälische Wilhelms-Universität Münster Inhalt
MehrSOM based on ADOxx Prototyp 2
SOM based on ADOxx Prototyp 2 Fundamentals, Model Transformation and Project Overview 08.09.2011 Dipl.-Wirtsch.Inf. Domenik Bork Otto - Friedrich - Universität Bamberg Table of Contents 1. Semantic Object
MehrDas deutsche Smart Meter System Ein Beispiel für den europäischen Datenschutz!
it-sa 2012 Nürnberg, 16.10.2012 Das deutsche Smart Meter System Ein Beispiel für den europäischen Datenschutz! Markus Bartsch TÜViT Das Deutsche Smart Meter System Ein Beispiel für den europäischen Datenschutz!
MehrSERVICE-ORIENTIERTE GESCHÄFTSMODELLE
SERVICE-ORIENTIERTE GESCHÄFTSMODELLE DER SCHLÜSSEL ZUR DIFFERENZIERUNG!? Christoph Ehrenhöfer Studienrichtung IT & Wirtschaftsinformatik FH CAMPUS 02 ServTec Austria, Edition 4 20.03.2014, Graz iwi.campus02.at
MehrCurriculum Vitæ. Seit Oktober 2012: Professorin (W3) für Modellierung und Simulation, Universität des Saarlandes
Curriculum Vitæ Persönliche Daten Name: Dr. Verena Wolf Geburtsdatum: 27. Februar 1979 Geburtsort: Hachenburg, Staatsangehörigkeit: deutsch Familienstand: verheiratet, ein Kind Adresse: Gustav-Bruch-Str.
MehrDROHNENTECHNOLOGIE UND ANWENDUNGEN. Prof. Dr. Wolfram Hardt Dr. Ariane Heller, Dipl.-Inf. Stephan Blokzyl
DROHNENTECHNOLOGIE UND Prof. Dr. Wolfram Hardt ANWENDUNGEN Prof. Dr. Wolfram Hardt Dr. Ariane Heller, Dipl.-Inf. Stephan Blokzyl Today Mobility reaches 3 rd Dimension Quelle: COPTERview airdata UG Individuality
MehrIndustrie 4.0. Integrative Produktion. Aachener Perspektiven. Aachener Perspektiven. Industrie 4.0. Zu diesem Buch
Zu diesem Buch»Industrie 4.0«zählt zu den Zukunftsprojekten der Hightech-Strategie der Bundesregierung. Sie umfasst nicht nur neue Formen intelligenter Produktions- und Automatisierungstechnik, sondern
MehrFachbibliothek NAWI. Zeitschriften & Reihen Abteilung Mathematik Stand: 3/2017. Titel Signatur Bestand
Fachbibliothek NAWI Zeitschriften & Reihen Abteilung Mathematik Stand: 3/2017 Titel Signatur Bestand Abhandlungen aus dem Mathematischen Seminar der Universitaet Hamburg ZI 16.401 1.1922-70.2000 L:1.1922
MehrDr. Jens Hündling Senior Sales Consultant. DOAG Apps 2011 Berlin, 05. Mai 2011
Business Management: Grundlagen, Business Process Life Cycle, Überblick Oracle BPM Suite 11g Dr. Jens Hündling Senior Sales Consultant DOAG Apps 2011 Berlin, 05. Mai 2011
MehrBuilding Information Modeling: Ein Modul für Studierende im Bachelor-Studiengang
Building Information Modeling: Ein Modul für Studierende im Bachelor-Studiengang Wolfgang Huhnt Fachgebiet Bauinformatik 11. BIM Anwendertag, Königstein im Taunus, 21.5.2014 Inhalt Warum ein Modul zum
MehrINSTITUT FÜR VERFAHRENSTECHNIK
Publikationsbericht 2017 Institut für Verfahrenstechnik INSTITUT FÜR VERFAHRENSTECHNIK Universitätsplatz 2, 39106 Magdeburg Tel. +49 (0)391 67 58402, Fax +49 (0)391 67 11209 udo.reichl@ovgu.de 1. Leitung
MehrSimulation of Cold Forging. - examples of applications from around the world - Dr. Gerhard H. Arfmann CPM GmbH, Herzogenrath
Simulation of Cold Forging - examples of applications from around the world - Dr. Gerhard H. Arfmann CPM GmbH, Herzogenrath 1 CV Dr. Arfmann Till 1974 High School at Kreisgymnasium Halle, Halle Westfalen,
MehrDynamic Robot Architecture for Robust Realtime Computer Vision
Research Collection Doctoral Thesis Dynamic Robot Architecture for Robust Realtime Computer Vision Author(s): Meier, Lorenz Publication Date: 2017 Permanent Link: https://doi.org/10.3929/ethz-a-010874068
MehrCoupling GIS and hydraulics using the example of the Dornbirnerach
Coupling GIS and hydraulics using the example of the Dornbirnerach Michaela Jud Department for Geoinformatics Technical University of Munich (TUM), Germany San Diego, 13 th of July 2011 Storm event august
MehrRecoPhos: Recovery of Phosphorus from Sewage Sludge and Sewage Sludge Ashes
RecoPhos: Recovery of Phosphorus from Sewage Sludge and Sewage Sludge Ashes Univ. Prof. Dr. Harald Raupenstrauch Department of Environmental and Energy Process Engineering Circular approaches to phosphorus:
MehrGeschäftsprozesse und Regeln
Geschäftsprozesse und Regeln 7 Szenarien einer möglichen Integration Jana Koehler Hochschule Luzern Lucerne University of Applied Sciences and Arts jana.koehler@hslu.ch Gartner: Organizations struggle
MehrIndustrie 4.0 Buzzword oder echte Chance für mehr operative Exzellenz? Ludwigshafen, 19. Oktober 2017 Dr.-Ing. Christoph Karrer
Industrie 4.0 Buzzword oder echte Chance für mehr operative Exzellenz? Ludwigshafen, 19. Oktober 2017 Dr.-Ing. Christoph Karrer Quelle: Larry Chen, SpeedHunters, 2015 9% der weltweit gehandelten Ersatzteile
MehrContent Workshop. Material-Efficiency in Swiss Industry based on systematic Ecodesign
-Efficiency in Swiss Industry based on systematic Ecodesign 3 Case industrial Cases with big potential Workshop Organisers: Content Workshop Openingspeech: Bruno Oberle, Director of the Swiss Federal Office
MehrRobotersysteme und künstliche Intelligenz für die Unterstützung des Menschen Elsa Andrea Kirchner
Elsa Andrea Kirchner DFKI Bremen & Universität Bremen Robotics Innovation Center Director: Prof. Dr. Frank Kirchner www.dfki.de/robotics robotics@dfki.de Exoskelette für die Rehabilitation von Schlaganfallpatienten
MehrPromotionsfeier. Promotionen des Fachbereichs 10 Mathematik und Informatik im SS 2013
Promotionsfeier Promotionen des Fachbereichs 10 Mathematik und Informatik im SS 2013 Promotionen im Juli 2013 Herr Stefan Diepenbrock Herr Dirk Feldmann Herr Sören Christian Gröttrup Herr Jan Hegemann
MehrSchnupperkurs. Steigerung gder Effizienz bei der Anwendungserstellung mit Hilfe von. Dipl. Ing.(FH) Rüdiger Ellmauer. Applications Engineer
Schnupperkurs Steigerung gder Effizienz bei der Anwendungserstellung mit Hilfe von LabVIEW Toolkits Dipl. Ing.(FH) Rüdiger Ellmauer Applications Engineer Umgebung zur Erstellung von Mess und Automatisierungssoftware
MehrEducation Day 2012. Wissensgold aus Datenminen: wie die Analyse vorhandener Daten Ihre Performance verbessern kann! Education Day 2012 11.10.
Wissensgold aus Datenminen: wie die Analyse vorhandener Daten Ihre Performance verbessern kann! 11.10.2012 1 BI PLUS was wir tun Firma: BI plus GmbH Giefinggasse 6/2/7 A-1210 Wien Mail: office@biplus.at
MehrModel-based ALM Arbeitsumgebungen à la carte
Model-based ALM Arbeitsumgebungen à la carte Insight 2013, Nürnberg November 2013 Jens Donig, Dr. Martin Künzle Agenda 01 Einleitung 02 Model-based ALM 03 Demo 04 Lernende Plattform November 2013 Jens
MehrSPI-Workbench: Modelle und Verfahren zur Synthese und Optimierung von Hardware/Software-Systemen aus SPI-Modellen
SPI-Workbench: Modelle und Verfahren zur Synthese und Optimierung von Hardware/Software-Systemen aus SPI-Modellen Prof. Dr.-Ing. J. Teich C. Grabbe, Ch. Haubelt, D. Koch Hardware-Software-Co-Design Universität
MehrAM 7. OKTOBER 2016 IM NCC OST DER NÜRNBERGMESSE PARTIKELSIMULATION. KEYNOTE Particles in Contact The Key Challenge in Modelling Particle Systems
AM 7. OKTOBER 2016 IM NCC OST DER NÜRNBERGMESSE PARTIKELSIMULATION Einladung zum DEM Forum, der technischen Informationsveranstaltung zur Simulation von Schütt-, Misch- und Fließvorgängen mit der Software
MehrWireless Sensor Netzwerke für den industriellen Einsatz
Wireless Sensor Netzwerke für den industriellen Einsatz Prof. Andreas Rüst Leiter Forschungsgruppe Internet-of-Things Zürcher Hochschule für angewandte Wissenschaften Institute of Embedded Systems Winterthur,
MehrInstitut für Künstliche Intelligenz
Institut für Künstliche Intelligenz Prof. Sebstaian Rudolph --- Computational Logic Prof. Steffen Hölldobler --- Wissensverarbeitung Prof. Ivo F. Sbalzarini --- Wissenschaftliches Rechnen für Systembiologie
MehrWearable Computing im Gesundheitswesen
Wearable Computing im Gesundheitswesen Dipl.-Ing. Dr. techn. Wolfgang Vorraber, Univ.-Prof. Dipl.-Ing. Dr. techn. Siegfried Vössner, Dipl.-Ing. Dietmar Neubacher, Technische Universität Graz, Österreich
MehrFAKULTÄT FÜR ELEKTROTECHNIK UND INFORMATIONSTECHNIK
Publikationsbericht 2016 FAKULTÄT FÜR ELEKTROTECHNIK UND INFORMATIONSTECHNIK Universitätsplatz 2, 39106 Magdeburg Tel. +49 (0)391 67 18641, Fax +49 (0)391 67 12287 feit@ovgu.de http://www.feit.ovgu.de
MehrAlgorithmen und Werkzeuge für Petrinetze
Niels Lohmann, Karsten Wolf (Hrsg.) Algorithmen und Werkzeuge für Petrinetze 15ter Workshop, AWPN 2008 Rostock, 26.-27. September 2008 Proceedings Preprints CS-03-08 Herausgeber: Niels Lohmann, Karsten
MehrIn-Silico-Toxikologie Modellbasierte Molekül-Simulationen
Modellbasierte Molekül-Simulationen Dr. Marcus Weber Arbeitsgruppenleiter Computational Drug Design Zuse-Institut Berlin (ZIB) Mitglied im MATHEON Geschäftsführer molconcept GmbH In-Vivo In-Vitro In-Silico
MehrThe core problem implementing BPEL based systems: Engineering Gap between Business- and Technical --Implementation!
ORACLE BPA Suite Process Automation using the new Business Process Analysis Suite Ralf Müller (ORACLE) Dirk Stähler (OPITZ CONSULTING) OC ARIS 4 ORACLE BPEL The core problem implementing BPEL based systems:
MehrPotenziale einer in-silico-unterstützten Bewertung von HAMR
Potenziale einer in-silico-unterstützten Bewertung von HAMR Dr. Marcus Weber, AG-Leiter Computational Drug Design Konrad-Zuse-Zentrum für Informationstechnik Berlin www.zib.de/weber Eintrag von toxischen
MehrDigitale Signalverarbeitung (DSV)
Digitale Signalverarbeitung (DSV) Markus Lorber/TGM 2. Oktober 2010 Markus Lorber/TGM () Digitale Signalverarbeitung (DSV) 2. Oktober 2010 1 / 47 Überblick über Anwendungen der DSV Überblick über Anwendungen
MehrMunich Center for Technology in Society
COST Action TU1002 Accessibility Instruments for Planning Practice in Europe Munich Center for Technology in Society Klaus Mainzer Founding Director Lehrstuhl für Philosophie und Wissenschaftstheorie Complex
MehrAutomatic Control Systems
Automatic Control Systems fourth edition Benjamin С. Kuo Professor of Electrical Engineering University of Illinois at Urbana-Champaign PRENTICE-HALL, INC., Englewood Cliffs, NJ 07632 Contents PREFACE
MehrPossible Contributions to Subtask B Quality Procedure
Possible Contributions to Subtask B Quality Procedure aeteba - Energy Systems, Germany Elmar Sporer zafh.net Stuttgart, Germany Dr. Dirk Pietruschka 1/14 aeteba - Consortium of different companies - Turnkey
MehrFAKULTÄT FÜR INFORMATIK DER TU WIEN Wissenschaft und Technologie im Informationszeitalter
FAKULTÄT FÜR INFORMATIK DER TU WIEN Wissenschaft und Technologie im Informationszeitalter Österreichs größte Institution für Forschung und Lehre in Informatik und Wirtschaftsinformatik Gravitationszentrum
MehrTheoretische Physik VI (Vertiefung) Nichtlineare Dynamik und Kontrolle
LV 3233 L 152 - Sommersemester 2016 Theoretische Physik VI (Vertiefung) Nichtlineare Dynamik und Kontrolle Dozenten: Prof. Dr. Kathy Lüdge Wann/Wo: Do & Fr 10:15 im EW203 (VL) Prof. Dr. E. Schöll, PhD
MehrLi, W. K.; Hui, C. W.; Li, P.; Li, A. X. Refinery Planning under Uncertainty. Industrial & Engineering Chemistry Research, 43 (2004), S
Veröffentlichungen bis Juli 2005 Artikel in Zeitschriften Hong, W. R.; Wang, S. Q.; ; Biegler, L. T. A Quasi-Sequential Approach to Large-Scale Dynamic Optimization Problems. To appear in AIChE Journal,
Mehr