Umschaltventile Magnete

Transkript

1 Umschaltventile Magnete DFE1/6 estellnr. Typ DFE1/618ES-W22-12VDC DFE1/618ES-W22-24VDC DFE1/618ES-Y22-12VDC DFE1/618ES-Y22-24VDC DFE1/618ES-W22-12VDC DFE1/618ES-W22-24VDC Weitere Umschaltventil Varianten auf nfrage möglich! Dauner ntriebstechnik GmbH Industriestraße ischberg Trosdorf 24- Tel.: 93/8- Fax: 93/ info@dauner-antriebstechnik.de

2 DFE with solenoid control Working conditions This catalogue shows technical specifications and diagrams measured with mineral oil of 46 mm 2 /s cst viscosity at 4 C temperature. DFE2 DFE1 DFE2 N. of available ways Nominal flow rating in steady conditions 6 l/min 9 l/min 14 l/min Operating pressure (maximum)* vailable nominal voltage without drain with drain VDC bar 29 psi 3 bar 46 psi bar 29 psi 3 bar 46 psi bar 29 psi 3 bar 46 psi VC Hz (with C4 connector) otenza nominale W Internal leakage () T Fluid p= bar 14 psi with fuid and valve at 4 C 7 cm 3 /min.43 in 3 /min 1 cm 3 /min.61 in 3 /min Mineral base oil Fluid temperature with NR seals da --2 a 8 C with FM seals da --2 a C Viscosity operating range da a 7 mm 2 /s -- from to 7 cst minimum maximum 12 mm 2 /s cst 4 mm 2 /s -- 4 cst Max. level of contamination 19/16 -- ISO 446 mbient temperature da --4 a 6 C cm 3 /min.92 in 3 /min NOTE -- For different working conditions please contact Customer Service. (*) -- This value is reachable only in steady conditions; for dynamic working conditions see the pages from 49 to 2. Standard threads LL ORTS S (ISO 228/1) UN -UNF (ISO ) DFE2 G 3/8 3/4--16 UNF--2 (SE 8) DFE1 G 1/2 7/8--14 UNF--2 (SE 1) DFE2 G 3/4 1 1/ UN--2 (SE 12) DRIN ORT L G 1/4 7/16--2 UNF--2 (SE 4) Dauner ntriebstechnik GmbH Industriestraße ischberg Trosdorf 24- Tel.: 93/8- Fax: 93/ info@dauner-antriebstechnik.de

3 with solenoid control DFE Hydraulic circuit 2 -way vailable as body only in DFE2/2 execution; for other executions 3--way body is used. lug and return spring kit Solenoid ody Spool Spool type Spool type erformance data drop versus flow Minimum dynamic conditions (supply = Vn--1%, coil at 7 C) 2 1 Spool () Without drain With drain Dauner ntriebstechnik GmbH Industriestraße ischberg Trosdorf 24- Tel.: 93/8- Fax: 93/ info@dauner-antriebstechnik.de

4 DFE with solenoid control Hydraulic circuit 3 -way It s possible to obtain 2--way diverter valve plugging port or. Spool type Spool type Spool type D erformance data drop versus flow: () DFE2/3 DFE1/3 DFE2/ Spool () 1 Spool () ressione 1 Spool Spool ortata (l/min) Minimum dynamic conditions: (supply = Vn--1%, coil at 7 C) DFE2/3 DFE1/3 DFE2/ With drain Without drain Dauner ntriebstechnik GmbH Industriestraße ischberg Trosdorf 24- Tel.: 93/8- Fax: 93/ info@dauner-antriebstechnik.de

5 with solenoid control DFE Hydraulic circuit 6 -way C D E F Spool type Spool type Spool type H E C F D E C F D E C F D erformance data drop versus flow: E(C). DFE2/6 DFE1/6 DFE2/ Spool () 1 Spool () 1 Spool Spool Minimum dynamic conditions: (supply = Vn--1%, coil at 7 C) DFE2/6 DFE1/6 DFE2/ With drain Without drain Dauner ntriebstechnik GmbH Industriestraße ischberg Trosdorf 24- Tel.: 93/8- Fax: 93/ info@dauner-antriebstechnik.de

6 DFE with solenoid control Hydraulic circuit 8 -way F G E D C H 1 2 E FCDGH Spool type E FCDGH Spool type erformance data drop versus flow C Minimum dynamic conditions (supply = Vn--1%, coil at 7 C) Spool Spool With drain Without drain Dauner ntriebstechnik GmbH Industriestraße ischberg Trosdorf 24- Tel.: 93/8- Fax: 93/ info@dauner-antriebstechnik.de

7 with solenoid control DFE1 Dimensional data 3 -way DFE1/3 valve Emergency manual override n.3 holes way DFE1/6 valve N 3 holes Emergency manual override Dauner ntriebstechnik GmbH Industriestraße ischberg Trosdorf 24- Tel.: 93/8- Fax: 93/ info@dauner-antriebstechnik.de

8 DFE1 with solenoid control Ordering codes Description example : Diverter valve DFE1/3 18 ES - W 22-12VDC - <CVN> Valve is supplied painted as standard, with one coat of rimer black antirust paint II way body W Y way spool 4. I 6- way body 6- way spool 4.. Dauner ntriebstechnik GmbH Industriestraße ischberg Trosdorf 24- Tel.: 93/8- Fax: 93/ info@dauner-antriebstechnik.de

9 with solenoid control DFE1 Ordering codes 3- way 1. ody * DFE1/3 3CO Standard body, S threaded 2. Spool options 3CS way, 2 positions with ports connected in transit position 3CS way, 2 positions with ports closed in transit position D 3CS14 3 -way, 2 positions, without transit position, with ports closed in rest position 6- way 1. ody * DFE1/6 3CO Standard body, S threaded 2. Spool options 3CS way, 2 positions with ports connected in transit position 3CS way, 2 positions with ports closed in transit position H 3CS way, 2 positions, D C in position 1, F E in position 2, ports closed in transit position N 3CS way, 2 positions with ports closed in transit position, with check valve 3. ositioner kits page W T2 Spring return in position Y GIU4 * Spring return in position 1, with G1/4 drain port 4. Tube assembly page 64 ES SOL16 Spring return in position 1 (without coil). Coil options page Without coil (only with tube kit) VDC supply (connector C2) 22-12VDC 4SOL1612 Coil with 12VDC nominal voltage 22-24VDC 4SOL1624 Coil with 24VDC nominal voltage 22-48VDC 4SOL1648 Coil with 48VDC nominal voltage VC supply (connector C4) 22-92VDC 4SOL1694 Coil with 92VDC nominal voltage (for 11VC) VDC 4SOL16192 Coil with 192VDC nominal voltage (for 22VC) I Optional connectors page 8 C2 2X11 ccording ISO44 C4 2X14 ccording to ISO44 with rectifier I I orts plug G1/2 3XT72718* ody conversion from 3 -way to 2 -way circuit NOTE (*) - Codes are referred to S thread. Dauner ntriebstechnik GmbH Industriestraße ischberg Trosdorf 24- Tel.: 93/8- Fax: 93/ info@dauner-antriebstechnik.de

10 DFE1 with solenoid control ositioner kits 18W kit Spring return in position 1 with plug. lug - wrench Nm / 31 lbft Return spring Y kit Spring return in position 1, with G1/4 joint for drain. L Joint - wrench Nm / 31 lbft L G1/ Return spring Dauner ntriebstechnik GmbH Industriestraße ischberg Trosdorf 64 DGR2E 24- Tel.: 93/8- Fax: 93/ info@dauner-antriebstechnik.de

11 with solenoid control DFE1 Solenoid parts ES tube assembly Wrench Nm / 17.7 lbft M22x Manual tightening; max. torque 6.6 Nm / 4.9 lbft ush for manual override Operating features lunger stroke : 1.2 mm /.4 in Coil options Thermoplastic protective covering Connection ISO44 (needs C2 connector, see page 8) Operating features Nominal voltage : VDC Nominal voltage tolerance... : 1% ower rating : 6 W Duty cycle : % Weather protection : I66 Coil insulation : Class H Dauner ntriebstechnik GmbH Industriestraße ischberg Trosdorf 24- Tel.: 93/8- Fax: 93/ info@dauner-antriebstechnik.de