Zert-iflkat. Certi'icate. Registrier-Nr. Registefed DIN :1980, DIN /A1:2002, DIN :2002, DIN V :2003

Größe: px
Ab Seite anzeigen:

Download "Zert-iflkat. Certi'icate. Registrier-Nr. Registefed DIN :1980, DIN /A1:2002, DIN :2002, DIN V :2003"

Transkript

1 TúYNRD Zertiflkat erti'iate RegistrierNr. Registefed No Zeihen des Auftraggebers ustomer's re'erene Frantisek Zykan Auftragsdatum Date o, order Aktenzeihen Fi/ere'erene ' /06.Brau/BQ Priifberiht Nr. Test reportno; Name und Anshrift des Auftraggebers MILS s.r.o. strutural system.s Roudnie nad Labem zeh Republik Name and address i' the ustomef' 1st berehtigt, das unten genannte Produkt mit dem abgebildeten Zeihen zu kennzeihnen is authorized to provide the.produt mentioned be/ow with the mark as iiiustrated Fertigungsstiitte Slehe Anlage 2 Gepriift nah MILSs.r.o. strutural systems Roudnie nad Labem zeh Republik DIN 41131:1980, DIN 41131/A1:2002, DIN 41132:2002, DIN V 41133:2003 Manu'atunng p/ant S~e Annex 2 Tested in"aordane with =:Be!hreibung des :Produktes (Details s. An1age 1) Aluminium Traversen System Typ QT. Aluminium Truss System type QT Desription o, produt (Detfli/s see Annex 1)...( GItigbis/ Va/ldppti/: Essen,.~. Bitte beahten sie auh die umseitigen Hinweise P/ease a/so pay attention to the in'ormationstated overlea' langemarkstr Essen.Fon +49 (0) Fax +49 (0) Emaif: prodeirt@tuevnord.de

2 TrN~ Anlage 1 zum Zertifikat Nr.: / Annex1to ettifiateno.: Aktenzeihen: / Filereferene: /06 Seite / Page3 van / of 4 Kind of Produt: onneting ross setion: Effetive length: Material: Main tubes: Braes: onial onneting element: Stress Resultants: Load table: Aluminium Truss System Type T retangular with a flange length of 299 x 299 mm relating to the enterline 0,5 m 4,0 m AIMgSi 1 F31/ EN AW 6082 T6 50 x 4 mm 25 x 3 mm AIuBiPb F37 / EN AW 2011 T8 bending moment: Mmax = 24,33 knm shear fore: max = 22,15 kn normal fore: Nmax= 40,68 kn I/) "tj 'o ro a. "tj ro..q "E..Q 'o ro "tj a. a., I/) "tj o "tj 'S; ';:: ro :u..q o 15> 'w m ke/m ke ke Die oben aufgefhrten Produkte durfen wie folgt gekennzeihnet werden: The above mentioned produts ould be provided with the following marking: TV NRD ERTGmbH Zerti~~rungS~~lIe fr proj tsiher'r~ /J

3 .. Anlage 1 zum Zertifikat Nr.: / Annex1toertifiateNo.: Aktenzeihen: / Fi/ereferene:2.4116/06 Seite / page4 von / of 4 The dead weight of the truss is already inluded. II) " '0 <ti a. " <ti.2 "E : 'o <ti " a. a., II) " ".:; 'I:: <ti : >.u) Die oben aufgefhrten Produkte drfen wie folgt gekennzeihnet werden: The above mentioned produts ould be provided withthe followingmarking:

4 7úVNRD Zertifikat ertifiate~ 'Registrier.ot.Jr. Registered No ustomer's referene Auftragsdatum Date of order Aktenzeihen Fi/e',eferene Frantisek Zykan '5/06 Brau/BQ Zeihen des Auftraggebers Name und Anshrift des Auftraggebers MILS s.r.o. strutural systems Roudnie nad Labem zeh Republik Name,and add;ess 01 the usfumer provide the.produt menponed be/ow with.the mark as i//ustrated MILS s.r.o. strutural systems Roudnie nad Labem zeh Republik DIN41131:1980,DIN41131/A1:2002, DIN41132:2002,DINV 41133:2003 Gepruft nah ~7001 is authorized to ist berehtigt, das unten genannte Produkt mit dem abgebildeten Zeihen zu kennzeihnen.fertigungssultte Siehe Anlage 2 PrUfberiht Nr. Test report no~ Bes:hreibung des Produktes Aluminium Traversen System Typ RT. A/uminiumTruss System type RT (Detailš s.anla.!je1) Manufaduringp/ant,See Annex 2 r'ested in ao[dan~ Desription wit~ ofprodut (DetailS see'annex 1)., GUltig bis/ Va/id unti/: ~7.02.2()12 ;. Essel1~ 27.02;2007 Bltte beahten sie auh die umseitigen Hinweise P/ease a/50 pay attention to the information 5tated overleaf ;.. ;.. :l:angfmarkstr ~ssen. Fon +49 (0) ' Fax +49 (0) prodert@tuevnord.de

5 Anlage 1 zum Zertifikat Nr.: / Annex1to ertifiateno.: Aktenzeihen: / Fifereferene:2.4115/06 Seite / Page3 von / of 4 Kind of Produt: onneting Effetive length: Material: Main tubes: Braes: onial onneting element: Stress Resultants: Load table: ross setion: Aluminium Truss System Type RTu retangular with a flange length of 299 x 207 mm relating to the enterline 0,5 m 4,0 m AIMgSi 1 F311 EN AW 6082 T6 50 x 4 mm 25 x 3 mm AIuBiPb F37 I EN AW 2011 T8 bending moment: shear fore: normal fore: Mmax= 24,33 knm Qmax= 22,15 kn Nmax= 40,68 kn ff) :: "tj "o u a. o "E ::.0 "tj u.2 :: : u "tj a. :: I) a. ff) "tj o "tj ":; "t: u : ::.2 I) o I) > :: "in m ka/m ka ka " Dleoben aufgefhrten Produkte drlen wie folgt gekennzeihnet werden: The above mentioned produts ould be provided with the following marking:

6 Anlage 1 zum Zertifikat Nr.: / Annex1to ertifiateno.: Aktenzeihen: / Fi/ereferene:2.4115/06 Seite / Page4 von / of 4 The dead weight of the truss is already inluded. lij... ' "5 as a. ' as "E....t=... as ' '5 a. I) a. lij ' ' "S:.;:: as... '.Q I) I) I "i) Die oben aufgefhrten Produkte durfen wie folgt gekennzeihnet werden: The above mentioned produts ould be prolíided with the following ma,king:

Zerti'fikat. Certificate. Registder-Nr. Registered No /06 Brau/BQ.c

Zerti'fikat. Certificate. Registder-Nr. Registered No /06 Brau/BQ.c 7úVNORD Zerti'fikat ertificate Registder-Nr. Registered No. 44 780 07. 335155-001 Zeichen des Auftraggebers ustomer's reference Frantlsek Zykan Auftragsdatum Date of order 23.01.2006 Aktenzeiche~ File'reference

Mehr

Zertifikat. Certificate. Registrier-Nr. Registered No. MILOS s.r.o. structural systems Spindlerova Roudnice nad Labem Czech Republik

Zertifikat. Certificate. Registrier-Nr. Registered No. MILOS s.r.o. structural systems Spindlerova Roudnice nad Labem Czech Republik TuVNRD Zertifikat ertificate RegistrierNr. Registered No. 4478012129006 Zeichen des Auftraggebers usiomerřs reference Auftragsdatum Date of order Aktenzeichen Fi/e reference Frantisek Zykan 22.06.2012

Mehr

TUI/NORD. Grossbaukasten 15. QUADRO der Großmoorbogen Hamburg Deutschland. Deutschland. Spielgerüste QUADRO Standard

TUI/NORD. Grossbaukasten 15. QUADRO der Großmoorbogen Hamburg Deutschland. Deutschland. Spielgerüste QUADRO Standard TUI/NORD L., Hiermit wird bescheinigt, dass die Firma I This certifies that the company QUADRO der Großmoorbogen 21079 Hamburg Deutschland Grossbaukasten 15 berechtigt ist, das unten genannte Produkt mit

Mehr

ZEICHENGENEHMIGUNG MARKS APPROVAL

ZEICHENGENEHMIGUNG MARKS APPROVAL ZEICHENGENEHMIGUNG MRKS PPROVL OSRM GmbH Marcel-Breuer-Str. 6 80807 München ist berechtigt, für ihr Produkt / is authorized to use for their product Vorschaltgerät, elektronisch Electronic ballast die

Mehr

ZEICHENGENEHMIGUNG MARKS APPROVAL

ZEICHENGENEHMIGUNG MARKS APPROVAL ZEICHENGENEHMIGUNG MARKS APPROVAL OSRAM GmbH Marcel-Breuer-Str. 6 80807 München ist berechtigt, für ihr Produkt / is authorized to use for their product die hier abgebildeten markenrechtlich geschützten

Mehr

ROLEC Gehäuse-Systeme GmbH Kreuzbreite 2 D Rinteln

ROLEC Gehäuse-Systeme GmbH Kreuzbreite 2 D Rinteln mounted with holder clic on a mounting plate by the client The specimen was tested in accordance with DIN EN 60529 : 2000-09 to determine the degrees of protection IP Code 66 and 67. IP 6X IP X6 IP X7

Mehr

ZEICHENGENEHMIGUNG MARKS APPROVAL

ZEICHENGENEHMIGUNG MARKS APPROVAL ZEICHENGENEHMIGUNG MARKS APPROVAL OSRAM GmbH Marcel-Breuer-Str. 6 80807 München ist berechtigt, für ihr Produkt / is authorized to use for their product die hier abgebildeten markenrechtlich geschützten

Mehr

ZEICHENGENEHMIGUNG MARKS APPROVAL

ZEICHENGENEHMIGUNG MARKS APPROVAL ZEICHENGENEHMIGUNG MARKS APPROVAL OSRAM GmbH Marcel-Breuer-Str. 6 80807 München ist berechtigt, für ihr Produkt / is authorized to use for their product die hier abgebildeten markenrechtlich geschützten

Mehr

Evidence of Performance

Evidence of Performance Air permeability, Watertightness, Resistance to wind load, Operating forces, Mechanical properties, Mechanical durability, Impact resistance Expert Statement No. 15-002226-PR01 (02) Product Designation

Mehr

Statische Berec hnung

Statische Berec hnung Engineering Dipl.-Ing. Michael Lück Ingenieurbüro für Messebau Bühnentechnik Fliegende Bauten Statische Berec hnung Dokumentation Auftraggeber: Projekt: Milos s.r.o. Špindlerova 286 413 1 Roudnice nad

Mehr

Statische Berec hnung

Statische Berec hnung Engineering Dipl.-Ing. Michael Lück Ingenieurbüro für Messebau Bühnentechnik Fliegende Bauten Statische Berec hnung Statische Dokumentation Structural documentation Auftraggeber: Projekt: Milos s.r.o.

Mehr

Anwenderstatik / users manual

Anwenderstatik / users manual Traversensystem / truss system FTT Seite 1 Anwenderstatik / users manual Objekt : Traversensystem FTT / truss system FTT Hersteller : MILOS s.r.o. structural systems Spindlerova 286 41301 Roudnice nad

Mehr

ZEICHENGENEHMIGUNG MARKS APPROVAL

ZEICHENGENEHMIGUNG MARKS APPROVAL ZEICHENGENEHMIGUNG MARKS APPROVAL OSRAM GmbH Marcel-Breuer-Str. 6 80807 München ist berechtigt, für ihr Produkt / is authorized to use for their product die hier abgebildeten markenrechtlich geschützten

Mehr

Statische Berechnung/ Structural Report

Statische Berechnung/ Structural Report Statische Berechnung/ Structural Report Objekt/ Subject: Excellentline Dropsystem Excellentline Drop System Entwicklung/ SHOWEM Veranstaltungstechnik GmbH Developer: Gutenbergstraße 12 85098 Großmehring

Mehr

Statische Berec hnung

Statische Berec hnung Engineering Dipl.-Ing. Michael Lück Ingenieurbüro für Messebau Bühnentechnik Fliegende Bauten Statische Berec hnung Statische Dokumentation Structural documentation Auftraggeber: Projekt: Milos s.r.o.

Mehr

ZEICHENGENEHMIGUNG MARKS APPROVAL

ZEICHENGENEHMIGUNG MARKS APPROVAL ZEICHENGENEHMIGUNG MRKS PPROVL OSRM GmbH Marcel-Breuer-Str. 6 80807 München ist berechtigt, für ihr Produkt / is authorized to use for their product Elektronisches Betriebsgerät für LED-Module Electronic

Mehr

ZEICHENGENEHMIGUNG MARKS APPROVAL

ZEICHENGENEHMIGUNG MARKS APPROVAL ZEICHENGENEHMIGUNG MARKS APPROVAL OSRAM GmbH Marcel-Breuer-Str. 6 80807 München ist berechtigt, für ihr Produkt / is authorized to use for their product die hier abgebildeten markenrechtlich geschützten

Mehr

Statische Berechnung Structural report

Statische Berechnung Structural report Traversensystem / truss system RTO Seite 1 Statische Berechnung Structural report Objekt : Traversensystem RTO / truss system RTO Hersteller : MILOS s.r.o. structural systems Spindlerova 286 41301 Roudnice

Mehr

drawbar eye series 2010

drawbar eye series 2010 drawbar eye series 2010 directive 94/20/EG / class S DIN 74054-40A / material St52-3 (no. 1.0570) / with bush 40 mm parameters for centre-axle trailer s ṣhaft cross section order no H x B mm length A mm

Mehr

VDE Prüf- und Zertifizierungsinstitut

VDE Prüf- und Zertifizierungsinstitut VDE Prüf- und Zertifizierungsinstitut VDE Prüf- und Zertifizierungsinstitut GmbH Merianstraße 28 63069 Offenbach Renesas Electronics Europe GmbH Karl-Hammerschmidt-Straße 42 Mr Vincent Mignard 85609 schheim-dornach

Mehr

VDE Prüf- und Zertifizierungsinstitut

VDE Prüf- und Zertifizierungsinstitut VDE Prüf- und Zertifizierungsinstitut VDE Prüf- und Zertifizierungsinstitut GmbH Merianstraße 28 Renesas Electronics Europe GmbH Karl-Hammerschmidt-Straße 42 Mr Vincent Mignard 85609 schheim-dornach Offenbach,

Mehr

Statische Berechnung Structural report / users manual

Statische Berechnung Structural report / users manual Traversensystem / truss system FTP Seite 1 Statische Berechnung Structural report / users manual Objekt : Traversensystem FTP / truss system FTP Hersteller : MILOS s.r.o. structural systems Spindlerova

Mehr

Lukas Hydraulik GmbH Weinstraße 39 D Erlangen. Mr. Sauerbier. Lukas Hydraulik GmbH Weinstraße 39 D Erlangen

Lukas Hydraulik GmbH Weinstraße 39 D Erlangen. Mr. Sauerbier. Lukas Hydraulik GmbH Weinstraße 39 D Erlangen Technical Report No. 028-71 30 95685-350 of 22.02.2017 Client: Lukas Hydraulik GmbH Weinstraße 39 D-91058 Erlangen Mr. Sauerbier Manufacturing location: Lukas Hydraulik GmbH Weinstraße 39 D-91058 Erlangen

Mehr

VDE Prüf- und Zertifizierungsinstitut

VDE Prüf- und Zertifizierungsinstitut VDE Prüf- und Zertifizierungsinstitut VDE Prüf- und Zertifizierungsinstitut GmbH Merianstraße 28 63069 Offenbach Microchip Technology Inc. Vestre Rosten 79 7075 TILLER Norway Offenbach, 2017-07-27 Ihr

Mehr

KONFORMITÄTSERKLÄRUNG / DECLARATION OF CONFORMITY

KONFORMITÄTSERKLÄRUNG / DECLARATION OF CONFORMITY KONFORMITÄTSERKLÄRUNG / DECLARATION OF CONFORMITY das Medizinprodukt Name marne Mobile Haltegriffe mit Vakuum the med ical device Sicherheitsanzeige Typ /typeorrnodel 1400220S; 1400221S; 1400222S; 1400223S;

Mehr

CERTIFICATE ISO 9001:2015. IGEL Technology GmbH. DEKRA Certification GmbH hereby certifies that the company

CERTIFICATE ISO 9001:2015. IGEL Technology GmbH. DEKRA Certification GmbH hereby certifies that the company CERTIFICATE ISO 9001:2015 DEKRA Certification GmbH hereby certifies that the company Scope of certification: Production, marketing and sales of thin client systems, information and communication technology,

Mehr

EN Instructions for use / assembly instructions 2 DE Gebrauchsanleitung / Montageanleitung 4. Exafill

EN Instructions for use / assembly instructions 2 DE Gebrauchsanleitung / Montageanleitung 4. Exafill EN Instructions for use / assembly instructions 2 DE Gebrauchsanleitung / Montageanleitung 4 Exafill 58129003 English Safety Notes Gloves should be worn during installation to prevent crushing and cutting

Mehr

Prüfbericht Nr. / Test Report No: F (Edition 1)

Prüfbericht Nr. / Test Report No: F (Edition 1) Emission date: 22.01.2015 Page: 1 of 5 Prüfbericht Nr. / Test Report No: F4-44254-48401-01 (Edition 1) Auftraggeber Applicant Geräteart Type of equipment Typenbezeichnung Type designation Seriennummer

Mehr

TECHNISCHER BERICHT TECHNICAL REPORT

TECHNISCHER BERICHT TECHNICAL REPORT Fehling LZ 11 HD; SDG/D67/WC Seite / Page 1/4 TECHNISCHER BERICHT TECHNICAL REPORT Nr. / No. 1. Allgemeine Angaben / General Information 1.1. Fabrikmarke / Make: Fehling 1.2. Fehling LZ 11 HD; SDG/D67/WC

Mehr

CERTIFICATE. The Notified Body of TÜV SÜD Industrie Service GmbH. certifies that

CERTIFICATE. The Notified Body of TÜV SÜD Industrie Service GmbH. certifies that CERTIFICATE The Notified Body - 0036 - of TÜV SÜD Industrie Service GmbH certifies that FEAT INDUSTRIALE S.p.A. Via G. Parini, 30 I-23861 Cesana Brianza (LC) has implemented, operates and maintains a Quality

Mehr

Zertifikat. Certificate. TUVRheinland. Relay (Electromechanical elementary relays) Zertifikat Nr. Certificate No. R

Zertifikat. Certificate. TUVRheinland. Relay (Electromechanical elementary relays) Zertifikat Nr. Certificate No. R Zertifikat Certificate Zertifikat Nr. Certificate No. R 50157251 Blatt Page 0003 Ihr Zeichen Client Reference B.P. Unser Zeichen Our Reference 01-KSH- 15024693 012 Ausstellungsdatum 13.09.2017 Date of

Mehr

kugelführungen für unbegrenzte schiebewege ball-bearing guides for unlimited slidewys

kugelführungen für unbegrenzte schiebewege ball-bearing guides for unlimited slidewys 41 Katalog 01 Standardführungen Catalog 01 standard ball-bearing 04 kugelführungen für unbegrenzte schiebewege ball-bearing guides for unlimited slidewys > allgemeine produktinformationen // einfachgehäuse

Mehr

European BS Standard DIN 8187, Teil 1 ISO

European BS Standard DIN 8187, Teil 1 ISO 2 3 European BS Standard DIN 8187, Teil 1 ISO 606-2004 chain pitch min. max. max. plate plate max. max. max. trans- ISO 606 weight inside roller plate thickness thickness pin pin connect verse tensile

Mehr

VDE Prüf- und Zertifizierungsinstitut GmbH / VDE Testing and Certification Institute. VDE Prüfbericht / VDE Test Report

VDE Prüf- und Zertifizierungsinstitut GmbH / VDE Testing and Certification Institute. VDE Prüfbericht / VDE Test Report Prüf- und Zertifizierungsinstitut GmbH / Prüfbericht / Test Report Report No.... : 2383-CC4-1 -ktenzeichen File No.... : 5015071-900-0100/2383 ustellungsdatum Date issue... : 2017-05-29 Labor Laboratory...

Mehr

Test Report No

Test Report No TFI Charlottenburger Allee 41 52068 Aachen Germany Charlottenburger Allee 41 52068 Aachen Germany Egetaepper A/S Postfach 190 7400 Herning DÄNEMARK Fon +49.241.9679 00 Fax +49.241.9679 200 postmaster@tfi-online.de

Mehr

VDE Priif- und Zertifizierungsinstitut

VDE Priif- und Zertifizierungsinstitut VDE Priif- und Zertifizierungsinstitut VDE Priif- und Zertifiiierungsinstitut Zeichengenehmigung Ausweis-Nr. / Blatt 1 Certificate No. page 40026876 2 Name und Sltz des Oenehmlgungs-lnhabers I Name and

Mehr

Test Report No

Test Report No TFI Charlottenburger Allee 41 52068 Aachen Germany Charlottenburger Allee 41 52068 Aachen Germany Egetaepper A/S Postafch 1 90 7400 Herning DÄNEMARK Fon +49.241.9679 00 Fax +49.241.9679 200 postmaster@tfi-online.de

Mehr

Fertigungsstatte Manufacturing Plant. Bandar Baru Jaya Gading Singapore EN :2001+A11 EN 50178:1997

Fertigungsstatte Manufacturing Plant. Bandar Baru Jaya Gading Singapore EN :2001+A11 EN 50178:1997 Zertifikat Certificate Zertifikat Nr. Certipcate No. Blatt Page R 50092901 0001 TUV Ihr Zeichen Client Reference Unser Zeichen Our Reference Ausstellungsdatum Date of Issue Mr. C.S. Chin ZSG1-STH- 18000610

Mehr

Z E R T I F I K AT. Benteler Steel/Tube GmbH Residenzstraße Paderborn Deutschland DIN EN ISO 9001 : 2008

Z E R T I F I K AT. Benteler Steel/Tube GmbH Residenzstraße Paderborn Deutschland DIN EN ISO 9001 : 2008 Z E R T I F I K AT für das Managementsystem nach Der Nachweis der regelwerkskonformen Anwendung wurde erbracht und wird gemäß TÜV NORD CERT-Verfahren bescheinigt für mit den Standorten und Gesellschaften

Mehr

Kraftfahrt-Bundesamt

Kraftfahrt-Bundesamt Kraftfahrt-Bundesamt ausgestellt von: Allgemeine Betriebserlaubnis (ABE) National Type Approval Kraftfahrt-Bundesamt (KBA) nach 22 in Verbindung mit 20 Straßenverkehrs-Zulassungs-Ordnung (StVZO) für einen

Mehr

EU-Baumusterprüfbescheinigungen EU-Type Examination Certificate

EU-Baumusterprüfbescheinigungen EU-Type Examination Certificate EU-Baumusterprüfbescheinigungen EU-Type Examination Certificate der Notifizierten Stelle über die Konformitätsbewertung nach ANHANG III der gemäß Richtlinie für Funkanlagen 2014/53/EU of the Notified Body

Mehr

und Berechtigung zur Führung des europäischen Prüfzeichens Zertifikat Nr Erstmalige Ausstellung: Wien,

und Berechtigung zur Führung des europäischen Prüfzeichens Zertifikat Nr Erstmalige Ausstellung: Wien, ÖSTERREICHISCHER VERBAND FÜR ELEKTROTECHNIK 1010 Wien, Eschenbachgasse 9 ZVR: 327279890 DVR: 1055887 Prüfwesen & Zertifizierung Kahlenberger Str. 2A 1190 Wien, Österreich Telefon: +43 1 370 58 06 Telefax:

Mehr

ZERTIFIKAT. Die Notifizierte Stelle - Kennnummer der TÜV SÜD Industrie Service GmbH. bescheinigt, dass die Firma

ZERTIFIKAT. Die Notifizierte Stelle - Kennnummer der TÜV SÜD Industrie Service GmbH. bescheinigt, dass die Firma ZERTIFIKAT Die Notifizierte Stelle - Kennnummer 0036 - der TÜV SÜD Industrie Service GmbH bescheinigt, dass die Firma S.C. ArcelorMittal Tubular s Galati S.R.L. Calea SMÎRDAN Nr. 1-T RO - 800698 Galaţi

Mehr

* Untersuchungsbericht / Investigation Report A

* Untersuchungsbericht / Investigation Report A Am Borsigturm 46 D-13507 Berlin Telefon: +49 30 4303 3160 Telefax: +49 30 4303 3169 E-Mail: info@technolab.de Internet: www.technolab.de Q-Cells SE Berlin, 2011-08-30 R&D Modules / Certification&Reliability

Mehr

P r ü f b e r i c h t Test Report

P r ü f b e r i c h t Test Report R014-15008.02 P r ü f b e r i c h t Test Report Nr. / No. R014-15008.02 Gemäß der einheitlichen Bedingungen für die Genehmigung der / With regard to uniform provisions concerning the approval of Fahrzeuge

Mehr

Statische Berechnung/ Structural Report

Statische Berechnung/ Structural Report Statische Berechnung/ Structural Report Objekt/ Subject: Design Stele D4 Design Stele D4 Entwicklung/ SHOWEM Veranstaltungstechnik GmbH Developer: Gutenbergstraße 12 85098 Großmehring Hersteller/ H.O.F.-Alutec

Mehr

CERTIFICATE. The Notified Body of TÜV SÜD Industrie Service GmbH. certifies that. TMK - ARTROM S.A. Str. Drăgăneşti Nr. 30 RO Slatina

CERTIFICATE. The Notified Body of TÜV SÜD Industrie Service GmbH. certifies that. TMK - ARTROM S.A. Str. Drăgăneşti Nr. 30 RO Slatina CERTIFICATE The Notified Body - 0036 - of TÜV SÜD Industrie Service GmbH certifies that TMK - ARTROM S.A. Str. Drăgăneşti Nr. 30 RO-230119 Slatina has implemented, operates and maintains a Quality Assurance

Mehr

Anerkennung. gültig vom fn.mmjjjj) valid from Idd.mm.yyyyl

Anerkennung. gültig vom fn.mmjjjj) valid from Idd.mm.yyyyl fr ts CD rö u -ö hö \m -f ko h3 CO Anerkennung von Bauteilen und Systemen Approval # *y ko kf 5«53 m-xi & 0 13 wcjl t; Ätl 2» i/) TJ f XI of Components and Systems Inhaber der Anerkennung Holder of the

Mehr

Thermocouple / Thermofühler. Watt. grounded geerdet E05302-F16 E05504-F16 E05917-F16 E05913-F16

Thermocouple / Thermofühler. Watt. grounded geerdet E05302-F16 E05504-F16 E05917-F16 E05913-F16 SINGE NOZZE / EINZEDÜSE Nozzle code / Düse Tip type STD Tip type SPR Düsenspitze STD Düsenspitze SPR FH666-DSTD FH666-DSPR FH666-DSTD FH666-DSPR FH666-DSTD FH666-DSPR FH6666-DSTD FH6666-DSPR FH6676-DSTD

Mehr

Device Component: - SIPLUS extreme ET 200MP IM PN ST TX RAIL Order Nr. 6AG2155-5AA00-4AB0. Breslauer Straße Fürth Deutschland

Device Component: - SIPLUS extreme ET 200MP IM PN ST TX RAIL Order Nr. 6AG2155-5AA00-4AB0. Breslauer Straße Fürth Deutschland Department: DF FA SE R&D CI Date: 15.04.2016 Device Component: - SIPLUS extreme ET 200MP IM 155-5 PN ST TX RAIL Order Nr. 6AG2155-5AA00-4AB0 IM 155-5 PN+Bus Connector Sitz der Gesellschaft: Berlin und

Mehr

ZERTIFIKAT. Die Zertifizierungsstelle der TÜV SÜD Industrie Service GmbH. bescheinigt, dass die Firma. AD 2000-Merkblatt W 0 / A 4 und TRB 801 Nr.

ZERTIFIKAT. Die Zertifizierungsstelle der TÜV SÜD Industrie Service GmbH. bescheinigt, dass die Firma. AD 2000-Merkblatt W 0 / A 4 und TRB 801 Nr. ZERTIFIKAT Die der TÜV SÜD Industrie Service GmbH bescheinigt, dass die Firma wurde als Hersteller nach AD 2000-Merkblatt W 0 / A 4 und TRB 801 Nr. 45 überprüft und anerkannt. Der Geltungsbereich der Überprüfung

Mehr

ZERTIFIKAT ISO 9001:2015. SAW-International GmbH. DEKRA Certification GmbH bescheinigt hiermit, dass die Organisation

ZERTIFIKAT ISO 9001:2015. SAW-International GmbH. DEKRA Certification GmbH bescheinigt hiermit, dass die Organisation ZERTIFIKAT ISO 9001:2015 DEKRA Certification GmbH bescheinigt hiermit, dass die Organisation SAW-International GmbH Zertifizierter Bereich: Büroräumlichkeiten, technische Zertifizierter Standort:,, (weitere

Mehr

Statische Berechnung/ Structural Report

Statische Berechnung/ Structural Report Statische Berechnung/ Structural Report Objekt/ Subject: Excellent Line Alpha for Nexo STM/M Series Entwicklung/ SHOWEM Veranstaltungstechnik GmbH Developer: Gutenbergstraße 12 85098 Großmehring Hersteller/

Mehr

VDE Prüf- und Zertifizierungsinstitut

VDE Prüf- und Zertifizierungsinstitut VDE Prüf- und Zertifizierungsinstitut VDE Prüf- und Zertifizierungsinstitut GmbH Merianstraße 28 63069 Offenbach katherm FIP GmbH Steinzeugstraße 50 Herr Hubertus Sauer 68229 Mannheim Offenbach, 2016-05-31

Mehr

This certificate is valid from 2014-07-10 to 2017-07-06 Certificate registration no.: 50714468 Duplicate

This certificate is valid from 2014-07-10 to 2017-07-06 Certificate registration no.: 50714468 Duplicate CERTIFICATE ISO 9001:2008 hereby certifies that the company PULS GmbH Scope of certification: Development, Production, Logistics and Sales of Power Supplies Certified location: Arabellastraße 15 (further

Mehr

FORTUNA Bulb Pipettes Vollpipetten

FORTUNA Bulb Pipettes Vollpipetten FORTUNA bulb pipettes are produced to the highest quality standards. They are offered in class AS ( A stands for the highest quality specifications, S for swift delivery) and class AS conformity approved.

Mehr

P r ü f b e r i c h t Test-Report

P r ü f b e r i c h t Test-Report ADR- LED-Quad 1000 Seite / Page 1 von / of 4 P r ü f b e r i c h t Test-Report Beurteilung eines Arbeitsscheinwerfers auf Übereinstimmung mit den Anforderungen des ADR / Approval of a work lamp in accordance

Mehr

0.65 au lieu de Pour les valeurs de pression intermédiaire, values. se référer aux.pages P.10 à P.14.

0.65 au lieu de Pour les valeurs de pression intermédiaire, values. se référer aux.pages P.10 à P.14. Pour les LI marqués avec une *, l exposant de la pression est Für die mit * markierten LI, ist der Druck-Exponent 0.65 anstatt DES JANTES APPROPRIEES DOIVENT ETRE UTILISEES - CONSULT- ER LES MANUFACTURIERS

Mehr

EU-Konformitätserklärung / EU-Declaration of Conformity Nr. / No A14 v11

EU-Konformitätserklärung / EU-Declaration of Conformity Nr. / No A14 v11 EU-Konformitätserklärung / EU-Declaration of Conformity Nr. / No. 13060A14 v11 Produktbezeichnung/- modell Product identification/- model Hersteller Manufacturer Anschrift Address Produktgruppe modularer

Mehr

BROEN BALLOMAX PN40, DN 15-50

BROEN BALLOMAX PN40, DN 15-50 Dealing with forces of nature BROEN BALLOMAX PN40, DN 15-50 Auf Wunsch auch mit Knebelgriff. Available with T-handle upon request. Beidseitig Flansche Vollverschweißter Stahlkugelhahn Materialbeschreibung

Mehr

Prüfzeugnisse Test certificates

Prüfzeugnisse Test certificates 10 Schüco FW 50 +.SI FW 50 + Art der Prüfung Type of test Stossfestigkeit Impact strength Wärmedämmung Thermal insulation Grundlage Basis EN 12152 Prüfinstitut Test institute ift Rosenheim 10027203 Nr.

Mehr

ZERTIFIKAT ISO 9001:2008. Greiwing logistics for you GmbH. DEKRA Certification GmbH bescheinigt hiermit, dass das Unternehmen

ZERTIFIKAT ISO 9001:2008. Greiwing logistics for you GmbH. DEKRA Certification GmbH bescheinigt hiermit, dass das Unternehmen ZERTIFIKAT ISO 9001:2008 DEKRA Certification GmbH bescheinigt hiermit, dass das Unternehmen Greiwing Zertifizierter Bereich: Spedition, Nutzfahrzeughandel, Reinigung, Werkstatt Zertifizierter Standort:

Mehr

VDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung

VDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung Blatt / page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr.. This supplement is only valid in conjunction with page 1 of the. Terrestrische Photovoltaik-Module mit Silizium-Solarzellen

Mehr

Euromast. Teleskopmast aus Aluminium Aluminum telescopic masts

Euromast. Teleskopmast aus Aluminium Aluminum telescopic masts Teleskopmast aus Aluminium Aluminum telescopic masts Best. Nr Nenn - Transp. Gewicht Rohrnutzlänge: Usable tube length Max. Spitzenzug mass Länge in kg A = 0.70 m D = 2.10 m in N in m in m B = 1.70 m E

Mehr

Device Component: - SIPLUS S DQ 16x110VDC ST TX RAIL Order Nr. 6AG2522-5EH00-4AB0. Breslauer Straße Fürth Deutschland

Device Component: - SIPLUS S DQ 16x110VDC ST TX RAIL Order Nr. 6AG2522-5EH00-4AB0. Breslauer Straße Fürth Deutschland Department: DF FA SE R&D CI Date: 14.07.2016 Device Component: - SIPLUS S7-1500 DQ 16x110VDC ST TX RAIL Order Nr. 6AG2522-5EH00-4AB0 DQ 16x110VDC +Bus Connector Sitz der Gesellschaft: Berlin und München,

Mehr

Inhaltsverzeichnis (de) / Table of contents (en)

Inhaltsverzeichnis (de) / Table of contents (en) Beschriftungsfolie für Türfreisprechsystem TFS-Dialog 400 (de) / Labelling foil for TFS-Dialog 400 door terminal system (en) Inhaltsverzeichnis (de) / Table of contents (en) Hinweise zur Bearbeitung (de)

Mehr

DIN 3440, Ausgabe TR T T1. ID:

DIN 3440, Ausgabe TR T T1.  ID: Bauteilgeprüfter Temperaturregler (Industrieregler) Type tested temperature control TR Hersteller license holder Fertigungsstätte manufacturer Typenbezeichnung type designation Prüfanforderung applied

Mehr

CERTIFICATE. The Certification Body of TÜV SÜD Industrie Service GmbH. certifies that

CERTIFICATE. The Certification Body of TÜV SÜD Industrie Service GmbH. certifies that CERTIFICATE The Certification Body - 0036 - of TÜV SÜD Industrie Service GmbH certifies that North American Stainless 6870 Highway 42 East Ghent, KY 41045-9615 USA has implemented, operates and maintains

Mehr

Test Report no. M10066 E Prüfprotokoll Nr.

Test Report no. M10066 E Prüfprotokoll Nr. LORÜNSER LEICHTMETALL GmbH, A-6824 Schlins, Austria, Bahnhofstrasse 9, Postfach 25 www.llmetall.com Sitz: Schlins, FN 6 60 94 Y, Handelsgericht Feldkirch Test Report no. M10066 E Prüfprotokoll Nr. Type

Mehr

Kraftfahrt-Bundesamt

Kraftfahrt-Bundesamt Kraftfahrt-Bundesamt ausgestellt von: Allgemeine Betriebserlaubnis (ABE) National Type Approval Kraftfahrt-Bundesamt (KBA) nach 22 in Verbindung mit 20 Straßenverkehrs-Zulassungs-Ordnung (StVZO) für einen

Mehr

Interconnection Technology

Interconnection Technology Interconnection Technology Register: 23 Date: 25.05.99 Measuring leads from Hirschmann Following measuring leads are replaced by the next generation. Additionally connectors and sockets in the same design

Mehr

Device Component: - SIPLUS extreme S AI 8xU/I HS T1 RAIL Order Nr. 6AG2531-7NF10-1AB0. Breslauer Straße Fürth Deutschland

Device Component: - SIPLUS extreme S AI 8xU/I HS T1 RAIL Order Nr. 6AG2531-7NF10-1AB0. Breslauer Straße Fürth Deutschland Department: DF FA SE R&D CI Date: 15.04.2016 Device Component: - SIPLUS extreme S7-1500 AI 8xU/I HS T1 RAIL Order Nr. 6AG2531-7NF10-1AB0 AI8xU/I/ HS+Bus Connector Sitz der Gesellschaft: Berlin und München,

Mehr

VDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung

VDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung Blatt / page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des sausweises Nr. This supplement is only valid in conjunction with page 1 of the. Elektronischer Schalter, Zeitschalter Electronic switch,

Mehr

3-pole 3-polig. Note Hinweis: Copper construction can be mounted upside down! Kupferaufbau kann horizontal gespiegelt werden!

3-pole 3-polig. Note Hinweis: Copper construction can be mounted upside down! Kupferaufbau kann horizontal gespiegelt werden! Installation Aufbau Feld 3-pole 3-polig xenergy field Feld 2000x600x600/800 Mounting kit Einbausatz: XMIX40W IZMX40B 3-pole 3-polig Current Rating Bemessungsstrom (I): 2500A busbar material Material der

Mehr

VDE Priif- und Zertifizierungsinstitut

VDE Priif- und Zertifizierungsinstitut VDE Priif- und Zertifizierungsinstitut VDE PrLlf- und Zetiiierungsinstitut Zeichengenehrnigung Ausweis-Nr. I Blatt I Certificate No. page 40012913 2 Name und Sitz des Genehmigungklnhabers I Name and rsgistered

Mehr

Maße abhängig von der Ausführung. Siehe angegebene Seiten. / Dimensions depend on version. See refered pages. 1)

Maße abhängig von der Ausführung. Siehe angegebene Seiten. / Dimensions depend on version. See refered pages. 1) EH 2 mit rotierender Trapezgewindespindel EH 2 with rotating trapezoidal-thread spindle Einstufige Getriebe One-stage gear units Zweistufige Getriebe Two-stage gear units X) Maße abhängig von der Ausführung.

Mehr

VDE Prüf- und Zertifizierungsinstitut

VDE Prüf- und Zertifizierungsinstitut ZEICHENGENEHMIGUNG MARKS APPROVAL Martin Kaiser GmbH & Co. KG Elektrotechnlsche Fabrik Hauptstraße 2 96272 Hochstadt ist berechtigt, for ihr Produkt I is authorized to use for thelr product Gerätestecker

Mehr

Report Number of issued No. copies Pages date. MHM-EST /D Jakobi. Object under test Type designation Identification No.

Report Number of issued No. copies Pages date. MHM-EST /D Jakobi. Object under test Type designation Identification No. TÜV Product Service GmbH Dudenstrasse 28 D-68167 Mannheim Telefon (0621) 395-342 Telefax (0621) 395-652. Accredited Laboratory (DA Tech) Reg.No. TTI-Go54/92-01 Test Report The test results relate only

Mehr

UNTERSUCHUNGSBERICHT Nr.: E 4.881

UNTERSUCHUNGSBERICHT Nr.: E 4.881 LGA QualiTest GmbH Postfach 3022 90014 Nürnberg Nürnberg, 19. Januar 2009 SCHISCHEK GmbH Herr Thomas Kellermann Mühlsteig 45 90579 Langenzenn UNTERSUCHUNGSBERICHT Nr.: E 4.881 Auftrag: IP-Schutzartprüfung

Mehr

VDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung

VDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung VDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung Ausweis-Nr. / Certificate No. 40040851 Blatt / Page 2 Name und Sitz des Genehmigungs-Inhabers / Name and registered seat of the Certificate holder

Mehr

Test Report. Test of resitance to inertia effects of Zirkona Backwall. Sled Test (Frontal Impact) 20 g / 30 ms

Test Report. Test of resitance to inertia effects of Zirkona Backwall. Sled Test (Frontal Impact) 20 g / 30 ms Test Report Test of resitance to inertia effects of Zirkona Backwall Sled Test (Frontal Impact) 20 g / 30 ms This report serves solely as a documentation of test results. 93XS0002-00_TdC.doc Page 1 1.

Mehr

egger Otoplastik + Labortechnik GmbH EN 352-2: 2002 (DIN EN 352-2: 2003) / /

egger Otoplastik + Labortechnik GmbH EN 352-2: 2002 (DIN EN 352-2: 2003) / / EC TYPE-EXAMINATION CERTIFICATE EG BAUMUSTERPRÜFBESCHEINIGUNG Expert Opinion of the Notified Body on the Conformity Assessment according to Article 10 of Directive 89/686/EEC Expertise der Benannten Stelle

Mehr

STRUCTURAL REPORT STATISCHE BERECHNUNG. LITEC QL40A - Tower. s.r.l Via delle Industrie 61 I Marcon-Venezia COMMISSION AUTHORITY/ AUFTRAGGEBER:

STRUCTURAL REPORT STATISCHE BERECHNUNG. LITEC QL40A - Tower. s.r.l Via delle Industrie 61 I Marcon-Venezia COMMISSION AUTHORITY/ AUFTRAGGEBER: FLIEGENDE BAUTEN TRAVERSENBERECHNUNGEN BÜHNENKONSTRUKTIONEN MESSEBAUTEN SONDERKONSTRUKTIONEN STRUCTURAL REPORT STATISCHE BERECHNUNG - Tower 310a COMMISSION AUTHORITY/ AUFTRAGGEBER: s.r.l Via delle Industrie

Mehr

Kraftfahrt-Bundesamt DE Flensburg

Kraftfahrt-Bundesamt DE Flensburg ausgestellt von: Allgemeine Betriebserlaubnis (ABE) National Type Approval Kraftfahrt-Bundesamt (KBA) nach 22 in Verbindung mit 20 Straßenverkehrs-Zulassungs-Ordnung (StVZO) für einen Typ des folgenden

Mehr

CERTIFICATE. The Notified Body of TÜV SÜD Industrie Service GmbH. certifies that

CERTIFICATE. The Notified Body of TÜV SÜD Industrie Service GmbH. certifies that CERTIFICATE The Notified Body - 0036 - of TÜV SÜD Industrie Service GmbH certifies that FOMAS S.P.A. Via Martiri della Liberazione, 17 I-23875 Osnago (Lecco) has implemented, operates and maintains a Quality

Mehr

OPERATING INSTRUCTIONS Test pump ZG 5.1. and ZG 5.2.

OPERATING INSTRUCTIONS Test pump ZG 5.1. and ZG 5.2. Elektromotoren und Gerätebau Barleben GmbH OPERATING INSTRUCTIONS Test pump ZG 5.1. and ZG 5.2. Elektromotoren und Gerätebau Barleben GmbH 2 Inhaltsverzeichnis Page 1 Use 4 2 Design features 4 2.1 Test

Mehr

ISLIKER MAGNETE AG - CH-8450

ISLIKER MAGNETE AG - CH-8450 GI-50.10 GI-50.10 1 / Hub / stroke = 10mm 110.5 9 68.5 3x M O 0 M6 18 SW5 O50 O6 Magnet bestromt gezeichnet Solenoid illustrated in energised position 6 max. Hub / stroke = 10mm 110.5 39 68.5 3x M O 0

Mehr

Datenblatt. P-series PDU 2.5/4/4AN

Datenblatt. P-series PDU 2.5/4/4AN Turn five into three that's the winning formula of the new P series with the PUSH IN connection system in which the pitches for 2.5, 4, 6 and 10 mm² are each combined in one terminal block. That means

Mehr

VDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung

VDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung OSRM GmbH, Marcel-Breuer-Str. 6, 80807 München usweis-nr. / 2 Elektronisches Betriebsgerät für LED-Module Electronic Controlgear for LED Modules OPTOTRONIC Typ(en) / Type(s) 01) OT 8/200-240/24 02) OT

Mehr

EU-Baumusterprüfbescheinigungen EU-Type Examination Certificate

EU-Baumusterprüfbescheinigungen EU-Type Examination Certificate EU-Baumusterprüfbescheinigungen der Notifizierten Stelle über die Konformitätsbewertung nach ANHANG III der gemäß Richtlinie für Funkanlagen 2014/53/EU of the Notified Body on conformity assessment according

Mehr

VDE Prüf- und Zertifizierungsinstitut Gutachten mit Fertigungsüberwachung

VDE Prüf- und Zertifizierungsinstitut Gutachten mit Fertigungsüberwachung Blatt / page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des Gutachtens mit Fertigungsüberwachung Nr.. surveillance No.. Silikon-Fassungsader, wärmebeständig Silicone wire, heat-resistant Typ(en)

Mehr

VDE Prüf- und Zertifi:zierungsinstitut

VDE Prüf- und Zertifi:zierungsinstitut 000805 VDE Prüf- und Zertifi:zierungsinstitut ZEICHEN GENEHMIGUNG MARKS APPROVAL Schurter AG Werkhofstrasse 8-12 6002 LUZERN SCHWEIZ ist berechtigt, für ihr Produkt I is authorized to use for their product

Mehr

VDE Prüf- und Zertifizierungsinstitut Gutachten mit Fertigungsüberwachung

VDE Prüf- und Zertifizierungsinstitut Gutachten mit Fertigungsüberwachung Blatt / Page 2 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des Gutachtens mit Fertigungsüberwachung Nr... Zubehör für Netzgeräte ccessories for power supplies Triple insulated winding wires Typ(en)

Mehr

Kraftfahrt-Bundesamt

Kraftfahrt-Bundesamt ausgestellt von: Allgemeine Betriebserlaubnis (ABE) National Type Approval Kraftfahrt-Bundesamt (KBA) nach 22 in Verbindung mit 20 Straßenverkehrs-Zulassungs-Ordnung (StVZO) für einen Typ des folgenden

Mehr

Inspection and Reporting: Mr. Eric Uhle, Element Materials Hamburg GmbH, Laboratory Mülheim Operations Manager Laboratory Mülheim M.Sc.

Inspection and Reporting: Mr. Eric Uhle, Element Materials Hamburg GmbH, Laboratory Mülheim Operations Manager Laboratory Mülheim M.Sc. info.muelheim@ Lahnstr. 26 Exquip Germany GmbH Mr. Kroll Auf dem Knuf 12 59073 Hamm Date 2017-11-02 Report No. 1709145S Part 4 / 1710342MH Order No. Inspection of Protector Testing acc. to API 5CT Ed.

Mehr

ZEICHENGENEHMIGUNG MARKS APPROVAL

ZEICHENGENEHMIGUNG MARKS APPROVAL ZEICHENGENEHMIGUNG MRKS PPROVL BB-Stotz-Kontakt GmbH Eppelheimer Straße 82 69123 Heidelberg ist berechtigt, für ihr Produkt / is authorized to use for their product die hier abgebildeten markenrechtlich

Mehr

FORSCHUNGS- UND TESTZENTRUM FÜR SOLARANLAGEN

FORSCHUNGS- UND TESTZENTRUM FÜR SOLARANLAGEN FORSCHUNGS- UND TESTZENTRUM FÜR SOLARANLAGEN Institut für Thermodynamik und Wärmetechnik Universität Stuttgart Professor Dr. Dr.-Ing. habil. H. Müller-Steinhagen in Kooperation mit Sonderuntersuchung Special

Mehr

Ludwig Häußler GmbH Fenster- und Türenfabrik. Draisstraße Speyer Germany Tel: +49(0)6232/ Fax: -37

Ludwig Häußler GmbH Fenster- und Türenfabrik. Draisstraße Speyer Germany Tel: +49(0)6232/ Fax: -37 Ludwig Häußler GmbH Fenster- und Türenfabrik Draisstraße 48 67346 Speyer Germany Tel: +49(0)6232/3144-0 - Fax: -37 info@energate.com WWW.ENERGATE.COM ENERGATE Test Report (Summary) No: haeussler-100801-13k,90,90,9

Mehr

PRÜFBERICHT TEST REPORT

PRÜFBERICHT TEST REPORT IFA Prüf- und Zertifizierungsstelle im DGUVTest Datum/Dafe: 25.11.2011 PRÜFBERICHT TEST REPORT Nr./A/o.: 2011 23610 1 Auftraggeber/ Customer Dipl.-Ing. Alexander Wirthl GmbH Schleifmittelwerk Niederzirking

Mehr