Hochgenauer Umgebungslichtsensor High Accuracy Ambient Light Sensor Lead (Pb) Free Product - RoHS Compliant SFH 5711

Transkript

1 Hochgenauer Umgebungslichtsensor High Accuracy Ambient Light Sensor Lead (Pb) Free Product - RoHS Compliant SFH 5711 Wesentliche Merkmale Optohybrid mit logarithmischem Stromausgang Perfekt an die Augenempfindlichkeit (Vλ) angepasst Niedriger Temperaturkoeffizient der Fotoempfindlichkeit Hohe Genauigkeit über weiten Beleuchtungsstärkebereich Automotive Freigabe Anwendungen Anwendungen im Automobilbereich Sonnenlichtsensor / Fahrlichtkontrolle Steuerung von Displayhinterleuchtungen Mobile Geräte Features Opto hybrid with logarithmic current output Perfect match to Human Eye Sensitivity (Vλ) Low temperature coefficient of spectral sensitivity High accuracy over wide illumination range Automotive qualified Applications Automotive applications Sunlight sensor / head lamp control Control of display backlighting Mobile devices Typ Type SFH /3 1) Bestellnummer Ordering code Q6511A SFH /2 1) on request 25-3 SFH /4 1) on request Ausgangsstrom, E v = 1lx, (white LED LW 541C) Output current, I OUT / μa 1) Nur eine Gruppe innerhalb einer Verpackungseinheit, siehe Kenndaten. Only one bin within one packing unit, see characteristics

2 Grenzwerte Maximum Ratings Betriebs- und Lagertemperatur Operating and storage temperature range Versorgungsspannung Supply voltage Ausgangsspannung Output voltage Elektrostatische Entladung Electrostatic discharge Human Body Model according to EOS/ESD T stg ) V CC 6 V V OUT < V CC V C ESD 2 kv 1) Maximum operation temperature of 1 C is only valid after soldering with JEDEC level 4 preconditioning. With JEDEC level 3 max. preconditioning operating temperature is 85 C. Empfohlener Arbeitsbereich Recommended Operating Conditions Betriebsspannung Supply voltage Beleuchtungsstärke Illuminance T A = 3 C C T A = 4 C C min. typ. max. V CC V E V k 1...8k lx

3 Kennwerte (T A = 25 C) Characteristics Stromaufnahme, E V = Current consumption V CC = 2.5 V V CC = 5. V Stromaufnahme, E V = 1lx Current consumption, E V = 1lx V CC = 2.5 V V CC = 5. V Spektraler Bereich der Fotoempfindlichkeit Spectral range of sensitivity Wellenlänge der max. Fotoempfindlichkeit Wavelength of max. photosensitivity Abmessung der bestrahlungsempfindlichen Fläche Dimensions of radiant sensitive area Ausgangskapazität Output capacitance Transferfunktion Transfer function, s. Fig. 1 Abweichung der Ausgangskennlinie von der Logarithmierfunktion Deviation of outputcharacteristic from logarithmic function, s. Fig. 1 Maximale Ausgangsspannung Maximum output voltage Einschaltzeit, E V = 1 lx Power on time, E V = 1 lx V CC = V -> V CC Antwortzeit, R L = 25 kohm, C = 1 nf Response time, s. Fig. 2 E V = 1 -> 1 lx E V = 1 -> 1 lx I CC I CC min. typ. max λ 1% μa μa nm λ s max nm L x B.4 x.4 mm x mm L x W C OUT 3 pf G µa / dek µa / dec L % V OUT t ON t r / t f V CC V ms ms

4 Kennwerte (T A = 25 C) Characteristics Ausgangsgenauigkeit über Temperaturbereich 1) Output accuracy over temperature range 1) E V = 1 lx T A = 4 C C T A = 3 C C T A = C C Ausgangsdunkelstrom, E V = Output dark current ΔI OUT min. typ. max. ± 1. ±.6 ± µa I out.1 1 na 1) Diese e entsprechen einer Photodiode mit einem TC von ungefähr.3 %/K. These values correspond to a photodiode with a TC of approximately.3 %/K. Gruppierung (T A = 25 C) Binning Ausgangsstrom 1) Output current E V = 1lx (white LED LW 541C) I out μa 1) 3µA Gruppenbreite entspricht einem Verhältnis von 1:2 in der Bestrahlungsstärke. 3µA bin width is equivalent to a spread of 1:2 of the irradiance. V CC EV log I I out = S x log ( E V /E O ) out with E O = 1lx / Sensitivity S = 1 µa GND OHF3997 Figure 1 Ersatzschaltbild Circuitry

5 Ev E max E min Iout I max 9% I min 1% t r t f t Figure 2 Definition der Antwortzeit Definition of Response Time

6 Relative Spectral Sensitivity of photodiode S rel = f (λ) 1 S rel (%) nm 8 Output Current I OUT = f (E V ) 5 µa 45 λ Directional Characteristics of photodiode S rel = f (φ) 1 9 Srel (%) Current Consumption I CC = f (V CC ) 5 µa I CC Phie OHF3998 I out lx E v V 6 V CC

7 Maßzeichnung Package Outlines 2.95 (.116) 2.65 (.14) 1.55 (.61) 1.25 (.49) 2.35 (.93) topview 2.5 (.81) (2 (.79)) Pin 4 Pin 3 Pick up area (1.7 (.67)) 2.1 (.83) 1.9 (.75) sideview 1.25 (.49).95 (.37).4 (.16).2 (.8) bottomview.8 (.31).6 (.24) (.3 (.12)) (.35 (.14)) Maße in mm (inch) / Dimensions in mm (inch) Anschlußbelegung Pin configuration Pin 1 Anti-Solder Green orientation indicator Pick up area: 2 x 1.7mm Pin 2 Photo sensitive area 1.25 (.49).95 (.37).5 (.2).3 (.12) Pin 1 (.7 (.28)) 1.27 (.5) GEOY712 Pin # Description 1 GND 2 GND 3 V CC 4 I OUT

8 Empfohlenes Lötpaddesign Recommended Solderpad Design.8 (.31).8 (.31) 3.9 (.154) 2.1 (.83) OHPY3984 Maße in mm (inch) / Dimensions in mm (inch)

9 Lötbedingungen Vorbehandlung nach JEDEC Level 3 Soldering Conditions Preconditioning acc. to JEDEC Level 3 Reflow Lötprofil für bleifreies Löten Reflow Soldering Profile for lead free soldering (nach J-STD-2C) (acc. to J-STD-2C) T 3 C C 24 C 217 C Maximum Solder Profile Recommended Solder Profile Minimum Solder Profile 1 s min 3 s max OHLA687 + C 26 C -5 C 245 C ±5 C +5 C 235 C - C s max 1 s max Ramp Down 6 K/s (max) 1 5 Ramp Up 3 K/s (max) 25 C s 3 t Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-9349 Regensburg All Rights Reserved. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. Packing Please use the recycling operators known to you. We can also help you get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1, may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered