ZMM METALIK DRILLING AND MILLING TECHNOLOGY FOR HIGHEST PRECISION ISO 9001 Reg.No. BUC-0597-1 DaimlerChrysler Aerospace Since 97
The constructive design provides for high precision of machining and high productivity in operations. The lathes C8C and C8D are with welded legs of sheet steel, while the lathes C8CM and C8DM are with grey cast iron legs. On customer's request the machine can be equipped with a wide range of accessories. World wide tested quality. Best for industry, workshops, training and education centers. UNIVERSAL LATHE UNIVERSALE DREHMASCHINE The C8C and C8D universal lathes are designed for the performance of various turning operations in machining of workpieces between centres, in a chuck, on faceplate or in special accessories. This type of lathe can be used for machining of cylindrical, conical, and face surfaces and for cutting of metric, inch, module and DP threads. C8C/C8D Drilling and milling technology for highest precision Digital readout Equipment DIN EN ISO 9001:94
Swing Spindle Feeds and threads Toolpost Tailstock Late drive Pump Grösster Drehdurchmesser Spindel Vorschuebe und Gewindesteigungen Werkzeughalter Reitstock Antrieb Pumpe Technical Data Height of centres over bed Spitzenhöhe 162 162 Distance between centers Spitzenweite 762 1000 Max. turning length Bar capacity Drehlänge Stangenmaterial 75 Over bed Über dem Bett Over cross slide Über dem Support 165 In gap Umlauf - über Bett 450 In fixed steady In der festen Lünette 70 In travelling steady In der mitlaufenden Lünette 70 Spindle nose Spindle bore Bohrung für Stangenmaterial 2 Number of spindle speeds Spindeldrehzahlstufen 12 (24) Spindle speed range Number of feeds Drehzahlbereich Anzahl der Vorschübe 85-00 (42,5-00) Range of longitudinal speeds Bereich der Längsvorschübe /rev 0,006-1,77 Range of cross feeds Bereich der Quervorschübe /rev 0,00-0,885 Number of metric threads Anzahl der metrischen Steigungen Range of metric threads Bereich der metrischen Steigungen 0,1-28 Number of inch threads Range of inch threads Number of module threads Range of module threads, pitch/module Number of DP. threads Range of DP. threads Distance: spindle axis/base Height Width Max. toolpost swivel Max. top slide swivel Quill diameter Max. quill travel in main direction Max. lateral travel of tail stock Quill taper Main drive - type V-belt size Number of belts Electric pump : - flow Overall dimensions Machine weight net Technische Daten Spindelaufnahme Anzahl der Zollgewinde Bereich der Zollgewinde Anzahl der Modulgewinde Bereich der Modulgewinde Anzahl der DP-Gewinde Bereich der DP-Gewinde Ausladung: Mitte Spindel/Aufspannfläche Höhe Breite Max. Schwenkbarkeit des Werkzeughalters Max. Schwenkbarkeit des Obersupports Durchmesser der Pinole Max. Pinolenverschiebung in die Hauptrichtung Max. Querverschiebung des Reitstocks Innenkegel der Pinole Hauptmotor - Typ - Drehzahl Keilriemen Anzahl der Keilriemen Elektropumpe : - Förderleistung - Drehzahl Gesamtabmessungen Nettogewicht pitch/1" M P degree degree l/min C8C (C8CM) No5 DIN 55027 No4,5 ASA.B5.10-6 5 75-2,5 0,1-1,75 70-4 25 60=8x45 90 40 100 0 Morse No. Individual 14 (710/14) 2,2 (1,4/2,2) 1x8x1500 1884x717x1262 710 (810) C8D (C8DM) 975 185 450 70 70 No5 DIN 55027 No4,5 ASA.B5.10-6 2 12 (24) 85-00 (42,5-00) 0,006-1,77 0,00-0,885 0,1-28 5 75-2,5 0,1-1,75 70-4 25 60=8x45 90 40 100 0 Morse No. Individual 14 (710/14) 2,2 (1,4/2,2) 1x8x1500 81x717x1274 800 (900) Variants - C8CM, C8DM - with cast iron feet - C8.. - with spindle taper acc. to DIN 55029 (Camlock) - C8.. - with 1- or 2-speed main motor - C8.. - with optical scales and digital readout - C8.. - with gap - C8.. - with conical ruler - C8.. - with screw and shaft protection Additional options - Face plate without jaws - 4- jaws face plate - Milling appliance - Threadpointer Sofia BULGARIA Pazardjik CNC MACHINE TOOLS, UNIVERSAL MACHINE TOOLS 4 Sinitevska 4400 Pazardjik Bulgaria ZMM METALIK JSC Phone: +59 4 445 294, 444 80, 44 417 Fax: +59 4 446 595, 446 596 E-mail: metalik@metalik.com
The LM, LM 60 and LM 400 universal lathes are designed for the performance of various turning operations in machining of workpieces between centres, in a chuck, on faceplate or in special accessories. This type of lathe can be used for machining of cylindrical, conical, and face surfaces and for cutting of metric, inch, module and DP threads. The constructive design provides for high precision of machining and high productivity in operations. The lathes LM, LM 60 and LM 400 are with welded legs of sheet steel. On customer's request the machine can be equipped with a wide range of accessories. World wide tested quality. Best for industry, workshops, training and education centers. LM /60/400 UNIVERSAL LATHE UNIVERSALE DREHMASCHINE FINE MASTER NEW Digital readout DIN EN ISO 9001:94
Swing Grösster Drehdurchmesser Technical Data Technische Daten LM Height of centres over bed Spitzenhöhe 165 185 Distance between centres Spitzenweite 760 760 Max. turning length Bar capacity Drehlänge Stangenmaterial 75 40 Over bed Über dem Bett Over cross slide Über dem Support 0 In gap Umlauf - über Bett 460 In fixed steady In der festen Lünette 10-80 In travelling steady In der mitlaufenden Lünette 80 LM 60 75 50 60 2 500 10-80 80 LM 400 5 760 75 50 400 270 540 10-80 80 Pump Late drive Tailstock Toolpost Feeds and threads Spindle Pumpe Antrieb Reitstock Werkzeughalter Vorschuebe und Gewindesteigungen Spindel Spindle nose Spindle bore Bohrung für Stangenmaterial 42 Number of spindle speeds Spindle speed range Number of feeds Spindeldrehzahlstufen Drehzahlbereich Anzahl der Vorschübe 9 (18) 6-2500 (50-00) Range of longitudinal speeds Bereich der Längsvorschübe /rev 0,0-1,2 Range of cross feeds Bereich der Quervorschübe /rev 0,015-1,2 Number of metric threads Anzahl der metrischen Steigungen Range of metric threads Bereich der metrischen Steigungen 0,2-28 Number of inch threads Range of inch threads Number of module threads Range of module threads, pitch/module Number of DP. threads Range of DP. threads Distance: spindle axis/base Height Width Max. toolpost swivel Max. top slide swivel Quill diameter Max. quill travel in main direction Max. lateral travel of tail stock Quill taper Main drive - type V-belt size Number of belts Electric pump : - flow Overall dimensions Machine weight net Spindelaufnahme Anzahl der Zollgewinde Bereich der Zollgewinde Anzahl der Modulgewinde Bereich der Modulgewinde Anzahl der DP-Gewinde Bereich der DP-Gewinde Ausladung: Mitte Spindel/Aufspannfläche Höhe Breite Max. Schwenkbarkeit des Werkzeughalters Max. Schwenkbarkeit des Obersupports Durchmesser der Pinole Max. Pinolenverschiebung in die Hauptrichtung Max. Querverschiebung des Reitstocks Innenkegel der Pinole Hauptmotor - Typ - Drehzahl Keilriemen Anzahl der Keilriemen Elektropumpe : - Förderleistung - Drehzahl Gesamtabmessungen Nettogewicht pitch/1" M P degree degree l/min MK 5 5 75-2,5 0,1-1,75 70-4 25 60=4x90 90 110 0 Morse No./No.4 Individual 1410 (710/1410) (4) 1x8x9(890) 1740x846.5x1 970 MK 6 MK 6 52 9 (18) 52 9 (18) 6-2500 (50-00) 6-2500 (50-00) 0,0-1,2 0,015-1,2 0,2-28 0,2-28 5 75-2,5 0,1-1,75 0,1-1,75 70-4 25 70-4 25 60=4x90 60=4x90 90 90 110 0 Morse No./No.4 Individual 1400 (710/1400) 4 (5,5) 1x8x980(910) 1740x846.5x150 1740x846.5x170 10 0,0-1,2 0,015-1,2 5 75-2,5 110 0 Morse No./No.4 Individual 1400 (710/1400) 4 (5,5) 1x8x990(960) 1070 Sofia BULGARIA Pazardjik CNC MACHINE TOOLS, UNIVERSAL MACHINE TOOLS 4 Sinitevska 4400 Pazardjik Bulgaria ZMM METALIK JSC Phone: +59 4 445 294, 444 80, 44 417 Fax: +59 4 446 595, 446 596 E-mail: metalik@metalik.com
The column drilling machine PK 0V is designed for drilling, countersinking, reaming, boring and thread cutting on details with small and middle dimensions. The machine is driven by two-speed motor through mechanical variator, giving a broad speed range. The quill feed is manual. World wide tested quality. Best for industry, workshops, training and Light base with coolant system PK 0V COLUMN-DRILLING MACHINE SÄULEN BOHRMASCHINE DIN EN ISO 9001:94
Technical Data Drilling capacity in steel Drilling capacity in cast iron Threadcutting capacity in steel Threadcutting capacity in cast iron Number of speeds Speed range Spindle taper Max. spindle stroke Distance: spindle axis/column Column diameter Working surface of the table T-slots, number x width Distance: spindle/table - min/max Working surface of the base Distance: spindle/base Electric motor : Overall dimensions Machine weight net Technische Daten Bohrleistung in Stahl Bohrleistung in Guss Gewindeschneiden in Stahl Gewindeschneiden in Guss Spindeldrehzahlstufen Drehzahlbereich Spindelaufnahme Max. Spindelhub Ausladung: Mitte Spindel/Säule Säulendurchmesser Tisch-Aufspannfläche T-Nutten, Anzahl x Breite Entfernung: Spindel/Tisch: min/max Grundplatte- Aufspannfläche Entfernung: Spindel/Grundplatte El-Motor : - Drehzahlen Gesamtabmessungen Nettogewicht PK 0V 2 M 12 M 16 Continous 225-4500 MK - short 100 250 90 50 x 70 2 x 14 100 / 785 600 x 80 125 750/1500 0,7/1,2 450 x 600 x 1700 185 Sofia BULGARIA Pazardjik CNC MACHINE TOOLS, UNIVERSAL MACHINE TOOLS 4 Sinitevska 4400 Pazardjik Bulgaria ZMM METALIK JSC Phone: +59 4 445 294, 444 80, 44 417 Fax: +59 4 446 595, 446 596 E-mail: metalik@metalik.com
The column drilling machine PK 02A is designed for drilling, countersinking, reaming, boring and thread cutting on details with small and middle dimensions. The machine is driven by one-speed motor between 9-step gear box, giving a broad speed range. The quill feed is automatic and manual World wide tested quality. Best for industry, workshops, training and Variant with tilting coordinate table Light base with coolant system Digital readout PK 02A COLUMN-DRILLING MACHINE SÄULEN BOHRMASCHINE DIN EN ISO 9001:94
Technical Data Technische Daten PK 02A Drilling capacity in steel Bohrleistung in Stahl 2 Drilling capacity in cast iron Bohrleistung in Guss Threadcutting capacity in steel Gewindeschneiden in Stahl Threadcutting capacity in cast iron Gewindeschneiden in Guss Number of speeds Spindeldrehzahlstufen 9 Speed range Drehzahlbereich 104-155-217-241- 60-505-700-1050-1470 Number of feeds Vorschubstufen 2 Feed range Vorschubbereich /rev 0,10-0, Spindle taper Spindelaufnahme MK - short Max. spindle stroke Max. Spindelhub 160 Distance: spindle axis/column Ausladung: Mitte Spindel/Säule 0 Column diameter Säulendurchmesser 1 Working surface of the table Tisch-Aufspannfläche 400 x 0 T-slots, number x width T-Nutten, Anzahl x Breite x 14 Distance: spindle/table - min/max Entfernung: Spindel/Tisch: min/max 80 / 785 Working surface of the base Grundplatte- Aufspannfläche 440 x 660 T - slots, number x width T-Nutten, Anzahl x Breite 2 x 14 Distance: spindle/base Entfernung: Spindel/Grundplatte 1280 Electric motor : El-Motor : - Drehzahlen 1500 1,1 Electric pump : - flow El-Pumpe : - Förderleistung l/min - Drehzahlen Overall dimensions Machine weight net Gesamtabmessungen Nettogewicht 660 x 0 x 22 405 8 M 22 M Additional Options -Threadcutting device - Coordinate table 250x6 - Optical scales and digital readout Variants - PK 02A - with mechanical clutch - PK 02B - with electromagnetic clutch - PK 02F - drilling-milling with coordinate table 250x6 - with spindle taper ISO Sofia BULGARIA Pazardjik CNC MACHINE TOOLS, UNIVERSAL MACHINE TOOLS 4 Sinitevska 4400 Pazardjik Bulgaria ZMM METALIK JSC Phone: +59 4 445 294, 444 80, 44 417 Fax: +59 4 446 595, 446 596 E-mail: metalik@metalik.com
COLUMN-DRILLING MACHINE SÄULEN BOHRMASCHINE The column drilling machine PK05A/PK040A/ PK045A/PK050A/PK055A is designed for drilling, countersinking, reaming, boring and thread cutting on details with small and middle dimensions. The machine is driven by one-speed motor between 9-step gear box, giving a broad speed range. PK 05A PK 040A PK 045A PK 050A PK 055A The quill feed is automatic and manual. Automatic feed device has an adjustable stop for the depth of drilling. World wide tested quality. Best for industry, workshops, training and education centers. Variant with tilting coordinate table Light base with coolant system Digital readout DIN EN ISO 9001:94
Technical Data Technische Daten PK 05A PK 040A PK 045A PK 050A PK 055A Drilling capacity in steel Bohrleistung in Stahl 5 40 45 50 55 Drilling capacity in cast iron Threadcutting capacity in steel Bohrleistung in Guss Gewindeschneiden in Stahl 45 M 22 50 M 55 M 6 60 M 42 65 M 42 Threadcutting capacity in cast iron Gewindeschneiden in Guss M M 42 M 52 M 60 M 60 Number of speeds Spindeldrehzahlstufen 9 9 9 9 9 Speed range Drehzahlbereich 92-11-185-257-65-515- 725-10-1450 81-115-162-226-21-452- 67-904-1274 61-85-12-1-269-90- 574-806-1169 54-75-109-169-27-44- 507-712-102 54-75-109-169-27-44- 507-712-102 Number of feeds Vorschubstufen 4 4 Feed range Vorschubbereich /rev 0,10-0, 0, 0,10-0, 0, 0,10-0, 0, 0,10-0, 0,-0,40 0,10-0, 0,-0,40 Spindle taper Spindelaufnahme MK 4 Max. spindle stroke Max. Spindelhub 160 Distance: spindle axis/column Ausladung: Mitte Spindel/Säule 0 Column diameter Säulendurchmesser 1 Working surface of the table Tisch-Aufspannfläche 400 x 0 T-slots, number x width T-Nutten, Anzahl x Breite x 14 Distance: spindle/table Entfernung: Spindel/Tisch 15 / 7 Working surface of the base Grundplatte- Aufspannfläche 400 x 400 T - slots, number x width T-Nutten, Anzahl x Breite 2 x 14 Distance: spindle/base Entfernung: Spindel/Grundplatte 1280 Electric motor : El-Motor : - Drehzahlen 1500 1,5 Electric pump : - flow El-Pumpe : - Förderleistung l/min - Drehzahlen Overall dimensions Machine weight net Gesamtabmessungen Nettogewicht 660x0x22 405 MK 4 0 70 160 0 x 560 x 18 85 / 710 470 x 515 2 x 18 MK 4 0 62,5 175 5 x 6 x18 95 / 740 470 x 515 2 x 18 MK 4 2 70 0 5 x 6 x 18 142 / 77 550 x 5 2 x 18 MK 5 2 70 0 5 x 6 x 18 100 / 7 550 x 5 2 x 18 1170 1500 1,5 9x560x2225 10 1500 9x560x290 10 1500 1040x575x247 10 1500 4 1040x575x247 500 700 85 860 Additional Options -Threadcutting device - "A", "B", "F" - Coordinate table 250x6 - "A", "B" - Optical scales and digital readout - Tilting table Variants "A" - with mechanical clutch "B" - with electromagnetic clutch "F" - drilling-milling with coordinate table 250x6 - with spindle taper ISO - PK 05, PK 040 - with spindle taper ISO 40 - PK 045, PK 050, PK 055 Sofia BULGARIA Pazardjik CNC MACHINE TOOLS, UNIVERSAL MACHINE TOOLS 4 Sinitevska 4400 Pazardjik Bulgaria ZMM METALIK JSC Phone: +59 4 445 294, 444 80, 44 417 Fax: +59 4 446 595, 446 596 E-mail: metalik@metalik.com
The column drilling machine PK is designed for drilling, countersinking, reaming, boring and thread cutting on details with small and middle dimensions. The machine is driven by two-speed motor between -step belt pulleys and dabble rate gear box, giving a broad speed range. The quill feed is automatic and manual World wide tested quality. Best for industry, workshops, training and PK Variant with tilting coordinate table Light base with coolant system Digital readout COLUMN-DRILLING MACHINE SÄULEN BOHRMASCHINE DIN EN ISO 9001:94
Technical Data Technische Daten PK Drilling capacity in steel Drilling capacity in cast iron Threadcutting capacity in steel Threadcutting capacity in cast iron Number of speeds Speed range Number of feeds Feed range Spindle taper Max. spindle stroke Distance: spindle axis/column Column diameter Working surface of the table T-slots, number x width Distance: spindle/table - min/max Working surface of the base T - slots, number x width Distance: spindle/base Electric motor : Electric pump : - flow Overall dimensions Machine weight net Bohrleistung in Stahl Bohrleistung in Guss Gewindeschneiden in Stahl Gewindeschneiden in Guss Spindeldrehzahlstufen Drehzahlbereich Vorschubstufen Vorschubbereich Spindelaufnahme Max. Spindelhub Ausladung: Mitte Spindel/Säule Säulendurchmesser Tisch-Aufspannfläche T-Nutten, Anzahl x Breite Entfernung: Spindel/Tisch: min/max Grundplatte- Aufspannfläche T-Nutten, Anzahl x Breite Entfernung: Spindel/Grundplatte El-Motor : - Drehzahlen El-Pumpe : - Förderleistung - Drehzahlen Gesamtabmessungen Nettogewicht /rev l/min 25 M 16 M 22 12 95-00 0,08-0,2 MK - short 160 285 1 400 x 4 x 14 100 / 7 400 x 400 2 x 14 1210 750/1500 0,7/1,1 900 x 440 x 22 70 Additional Options - Threadcutting device - Optical scales and digital readout Sofia BULGARIA Pazardjik CNC MACHINE TOOLS, UNIVERSAL MACHINE TOOLS 4 Sinitevska 4400 Pazardjik Bulgaria ZMM METALIK JSC Phone: +59 4 445 294, 444 80, 44 417 Fax: +59 4 446 595, 446 596 E-mail: metalik@metalik.com
The radial drilling machine RS 2-800 is a modern machine with easy and rapid mobility, comfortable operator stand position and large working area, in relation to the taken up room. The lifting and lowering operation can be done with the blocked arm which allows deep drilling, thanks to the addition of spindle and column strokes (560 ) without losing centre, an important detail during machining operations with different size of tools, enabling the selection of the convenient working height in each case. The automatic feeds will be connected by an electromagnetic clutch by means of a push button. The head centralized arrangement of all the operation controls, keeps an easy operating range in all arms positions, allowing notable reduction of traditional manufacturing costs. The machine is provided with a selector switch, which allows to reverse automatically at double speed when is used for tapping operations. World wide tested quality. Best for industry, Variant with options ACU-RITE RS 2-800 RADIAL-DRILLING MACHINE SCHNELLRADIALBOHRER DIN EN ISO 9001:94
Technical Data Technische Daten RS 2-800 Drilling capacity in steel Drilling capacity in cast iron Threadcutting capacity in steel Threadcutting capacity in cast iron Bohrleistung in Stahl Bohrleistung in Guss Gewindeschneiden in Stahl Gewindeschneiden in Guss 25 2 M 24 M Number of speeds Spindeldrehzahlstufen 12 Speed range Drehzahlbereich 102-00 Number of feeds Vorschubstufen Feed range Vorschubbereich /rev 0,10-0,-0, Spindle taper Spindelaufnahme MK 4 Max. spindle stroke Max. Spindelhub 150 Distance spindle axis - column: min/max Ausladung: Mitte Spindel/Säule - min/max 2 / 10 Column diameter Säulendurchmesser 170 Working surface of the table Tisch-Aufspannfläche 10 x 650 T-slots, number x width T-Nutten, Anzahl x Breite x 18 Distance spindle - table: min/max Entfernung: Spindel/Tisch - min/max 0 / 710 Working surface of the base Grundplatte- Aufspannfläche 10 x 650 T - slots, number x width T-Nutten, Anzahl x Breite x 18 Distance: spindle/base - min/max Entfernung: Spindel/Grundplatte - min/max 1000 / 1410 Electric motor - main connection: Motor - Hauptüberweisung: Electric motor - column: - Drehzahlen Motor - Säule: 1500 / 00 1,1 / 1,5 Electric motor - hydraulics: - Drehzahlen Motor - Hydraulik: 1500 1,5 - Drehzahlen 180 0,7 Electric pump : - flow Elektropumpe: - Förderleistung l/min - Drehzahlen Overall dimensions of a machine with supplementary base Overall dimension of the working zone of a machine with supplementary base Gesamtabmessungen der Maschine mit Bodenplatte Arbeitsplatz der Maschine mit Bodenplatte 1695x10x2150 Machine weight without options Gewicht der Maschine ohne options 1570 Supplementary base weight Bodenplatte - Gewicht 50 Tilting table weight Schwenktisch - Gewicht 1 Supplementary table weight Zusatztisch - Gewicht 100 Coolant system weight Kühlmitteleinrichtung - Gewicht 8 260x1500x2750 Highlights AUTOMATIC UNBLOCKING: A pushbutton on the head activates a hydraulic pump motor which frees the radial and longitudinal arm movement. In order to have the arm permanently free, loosen the knurled screw and press the deblocking button. To keep the arm fixed, fully tighten up te knurled screw - The arm is now automatically blocked. HEAD, consisting in an autonomous very compact unit, driven by a two Speeds motor. The transmission to the working spindle is by means of lease-hardened and ground gears. There is a pump inside of the head for lubrication. COLUMN of hardened alloyed steel, in hard chromed and ground finish; perfect sliding on perlitic cast iron housing. SLIDE COLUMN of casehardened and ground steel, avoiding rotation. LIFTING MECHANISM consisting in a 2 HP motor, with one gear reductor and spindle upon adjustable bronze nut; lifting speed is 1,5 m/min. Additional Options Tilting table - it can be set at three different heights and allows the adjustment of the working base in a position, in both directions, which is much easier than conventional inclinated fixtures. Supplementary table - this accessory will complement the working area of the base bed, providing two working area at intermediary heights between the working surface of the, main table and that of the bed base. Attached red base - adequate for large sized parts and for setting of tilting or rotating fixtures. Coolant attachment - consistingin one tank, motor driven pump, flexible pipes and soft cock. ACU- RITE - digital indication. Sofia BULGARIA Pazardjik CNC MACHINE TOOLS, UNIVERSAL MACHINE TOOLS 4 Sinitevska 4400 Pazardjik Bulgaria ZMM METALIK JSC Phone: +59 4 445 294, 444 80, 44 417 Fax: +59 4 446 595, 446 596 E-mail: metalik@metalik.com
Internet NT Technology WIN / CAD / CAM / CAE Construction LAN / RS22 Direct control WWW LDAP FTP Streaming Video Mail WebCam Video / Internet WAN / Internet Diagnostic LAN / RS22 Diagnostic Wireless / Internet Service GSM Info ZMM Metalik JSC, one of the worlds leader producers, with a wide range of drilling, drilling-milling machines and centers, develops information technologies in machine building business and a hi-tech full engineering solutions. Sofia Pazardjik CNC MACHINE TOOLS, UNIVERSAL MACHINE TOOLS 4 Sinitevska 4400 Pazardjik Bulgaria ZMM METALIK JSC Phone: +59 4 445 294, 444 80, 44 417 Fax: +59 4 446 595, 445 596 E-mail: metalik@metalik.com