imes-icore Datron D5 Wissner Gamma 202 Röders RXD Dental Concept DC5 MB Maschinen Cobra Mill MEDENTIKA PREFACE ABUTMENTS
Die PreFace -Linie von Medentika intelligent entwickelt und gewissenhaft produziert. international patent pending
The Medentika PreFace line developed with intelligence and produced conscientiously.
4 PreFace -Abutments B-Serie So sieht Ihr neuer Spielraum für mehr unternehmerisches Potenzial aus: Mit PreFace -Abutments und PreFace -Abutmenthaltern steigen Sie in Ihre eigene Produktion ein. Gleichzeitig bleiben Sie flexibel in der individuellen Gestaltung Ihrer Abutmentlösungen. Mit PreFace -Abutments sind Sie auf der sicheren Seite. Während die Durchmesser 11,5 und 16 Millimeter für die notwendige Variabilität sorgen, garantiert eine einheitliche Länge die exakte Nullpunktdefinition. Wir liefern Ihre PreFace -Abutments im Übrigen immer inklusive der Abutmentschraube! Um Ihnen auch auf der Materialseite größtmögliche Variabilität zu gewährleisten sind die PreFace-Abutments in Titan Grade 5 KV als auch in CoCr verfügbar. Die Vorteile der PreFace -Abutments auf einen Blick: Kurze Bearbeitungszeiten in der Produktion durch zwei Rohlingsdurchmesser Maximale Freiheit im Design durch optimierte Auswahl der Fräsrohlinge Maximaler Schutz für das exakt gestaltete Implantatinterface durch Spannen des Abutments lediglich auf der Stirnseite Höchste Präzision im Interface durch vorgefertigte, standardisierte Fertigungsprozesse Mehr Freiheit bei der Gestaltung des Emergenzprofils durch besondere Ausgestaltung der Rohlinge PreFace Bibliothek verfügbar für:
PreFace -Abutments 5 PreFace -Abutments sind verfügbar für: Astra Tech OsseoSpeed Bio Horizons Internal Biomet 3i Certain Biomet 3i Außenhex Bredent Sky Conelog Dentsply-Friadent Frialit/Xive Medentika M-Implant MIS Implants Nobel Active Nobel Biocare Brånemark Nobel Biocare Replace Select Straumann Bone Level Straumann SynOcta Zimmer Tapered Screw-Vent Mit PreFace -Abutmenthaltern erreichen Sie eine ausgezeichnete Wertschöpfung. Die optimale Auswahl der Rohlinge, die minimale Anzahl der Komponenten und die Vorteile einer automatisierten Produktion führen zu extrem effizienten Fertigungsprozessen. Trotz immenser Flexibilität in der Ausgestaltung Ihrer Produktion, erhalten Sie eine runde Gesamtlösung aus einer Hand! Ihre Vorteile des PreFace -Abutmenthalters auf einen Blick: Wesentlich präzisere Fertigung als mit herkömmlichen Haltern durch die innovative, einteilige Bauweise Kurze Produktionszeiten durch die gleichzeitige Bearbeitung von sechs Rohlingen in einem Arbeitsgang Besonders zeitsparende Arbeitsweise durch Spannung des Abutments mit lediglich einer Schraube im Halter Maximaler Schutz für das exakt gestaltete Implantatinterface durch Spannen des Abutments lediglich auf der Stirnseite Sehr übersichtliche und für Fehler nicht anfällige Produktion durch minimale Anzahl der Komponenten Extrem günstige Investition durch die einfache Bauweise des PreFace -Abutmenthalters und die Vermeidung teurer Verschleißteile
6 PreFace -Abutments B-Serie This is how your new scope for more corporate potential will appear: You can launch your own production process with PreFace -Abutments and PreFace -Abutment holders. At the same time you continue to be flexible in terms of the individual design of your abutment solutions. You are on the safe side with PreFace -Abutments. Whilst the diameters of 11.5 and 16 millimetres ensure the necessary variability, a uniform length guarantees the precise definition of the zero point. Incidentally we always supply your PreFace -Abutments complete with a abutment screw! To provide the widest possible variability of materials, the PreFace abutments are available in Titanium Grade 5 CF and CoCr. The advantages of the PreFace -Abutments at a glance: Short machining times in the production process - through two blank diameters Maximum freedom of design - through the optimised selection of the milling blanks Maximum protection for the precisely designed implant interface - through screwing the abutment tight merely on the front side Highest levels of precision in the interface - through preassembled, standardised manufacturing processes More freedom during the design of the emergence profile - through the special configuration of the blanks PreFace Library available for:
PreFace -Abutments 7 PreFace -Abutments are available for: Astra Tech OsseoSpeed Bio Horizons Internal Biomet 3i Certain Biomet 3i Außenhex Bredent Sky Conelog Dentsply-Friadent Frialit/Xive Medentika M-Implant MIS Implants Nobel Active Nobel Biocare Brånemark Nobel Biocare Replace Select Straumann Bone Level Straumann SynOcta Zimmer Tapered Screw-Vent You achieve excellent added value with PreFace -Abutment holders. The ideal selection of blanks, the minimum number of components and the advantages of automated production lead to extremely efficient manufacturing processes. Despite the immense flexibility in the design of your production you will receive a well-rounded complete solution from one source! Your advantages of the PreFace -Abutment holder at a glance: Much more precise manufacturing than is the case with conventional holders - due to the innovative, single-piece design Short production times - through the simultaneous machining of six blanks in one working process Particularly time saving way of working - through the screwing tight of the abutment with just one screw in the holder Maximum protection for the precisely designed implant interface - through screwing the abutment tight merely on the front side Very transparent production process that is not susceptible to errors - through the minimum number of components Extremely cheap investment - through the simple design of the PreFace-Abutment holder and the avoidance of expensive wearing parts
8 PreFace -Abutments B-Serie PreFace -Abutments
PreFace -Abutments 9 B-Serie/B-Series compatible with Sky Bredent Empfohlenes Drehmoment: 25 Ncm Recommended torque: 25 Ncm 3,5 5,5 3,5 5,5 Diameter (mm) 11,5 16 Art.-No. Titanium B 9000-R B 9000-16R Art.-No. CoCr X B 9800-16R D-Serie/D-Series compatible with Conelog Empfohlenes Drehmoment: 20 Ncm Recommended torque: 20 Ncm 3,3 3,8/4,3 3,8/4,3 Diameter (mm) 11,5 11,5 16 Art.-No. Titanium D 9000-R D 9010-R D 9010-16R Art.-No. CoCr D 9800-R X D 9810-16R E-Serie/E-Series compatible with Nobel Biocare Replace Select NP 3,5 RP 4,3 RP 4,3 WP 5,0 WP 5,0 Empfohlenes Drehmoment: 35 Ncm Recommended torque: 35 Ncm diameter (mm) 11,5 11,5 16 11,5 16 Art.-No. Titanium E 9000-R E 9010-R E 9010-16R E 9020-R E 9020-16R Art.-No. CoCr E 9800-R X E 9810-16R X E 9820-16R Bei Produkten, die mit gekennzeichnet sind, handelt es sich um eingetragene Warenzeichen des entsprechenden Herstellers. Products indicated with are registered brand names of respective manufacturers.
10 PreFace -Abutments B-Serie F-Serie/F-Series compatible with Nobel Active Empfohlenes Drehmoment 3,0: 15 Ncm Empfohlenes Drehmoment NP/RP: 35 Ncm 3,0 NP 3,5 NP 3,5 RP 4,3/5,0 RP 4,3/5,0 Recommended torque 3,0: 15 Ncm Recommended torque NP/RP: 35 Ncm Diameter (mm) 11,5 11,5 16 11,5 16 Art.-No. Titanium F 9020-R F 9000-R F 9000-16R F 9010-R F 9010-16R Art.-No. CoCr F 9820-R X F 9800-16R X F 9810-16R H-Serie/H-Series compatible with Biomet 3i Certain Empfohlenes Drehmoment: 20 Ncm Recommended torque: 20 Ncm 3,4 4,1 4,1 5,0 Diameter (mm) 11,5 11,5 16 16 Art.-No. Titanium H 9000-R H 9010-R H 9010-16R H 9020-16R Art.-No. CoCr H 9800-R X H 9810-16R H 9820-16R I-Serie/I-Series compatible with Biomet 3i Außenhex Empfohlenes Drehmoment: 35 Ncm Recommended torque: 35 Ncm 3,4 4,1 5,0 Diameter (mm) 11,5 11,5 16 Art.-No. Titanium I 9000-R I 9010-R I 9020-16R Art.-No. CoCr I 9800-R I 9810-R I 9820-16R Bei Produkten, die mit gekennzeichnet sind, handelt es sich um eingetragene Warenzeichen des entsprechenden Herstellers. Products indicated with are registered brand names of respective manufacturers.
PreFace -Abutments 11 K-Serie/K-Series compatible with Nobel Biocare Brånemark Empfohlenes Drehmoment: 35 Ncm Recommended torque: 35 Ncm NP 3,5 RP 4,1 WP 5,1 Diameter (mm) 11,5 11,5 16 Art.-No. Titanium K 9000-R K 9010-R K 9020-16R Art.-No. CoCr K 9800-R K 9810-R K 9820-16R L-Serie/L-Series compatible with Straumann Bone Level Empfohlenes Drehmoment: 35 Ncm Recommended torque: 35 Ncm NC 3,3 NC 3,3 RC 4,1/4,8 RC 4,1/4,8 Diameter (mm) 11,5 16 11,5 16 Art.-No. Titanium L 9000-R L 9000-16R L 9010-R L 9010-16R Art.-No. CoCr X L 9800-16R X L 9810-16R N-Serie/N-Series compatible with Straumann SynOcta Empfohlenes Drehmoment: 35 Ncm Recommended torque: 35 Ncm NNC 3,5 RN 4,8 RN 4,8 WN 6,5 WN 6,5 Diameter (mm) 11,5 11,5 16 11,5 16 Art.-No. Titanium N 9030-R N 9010-R N 9010-16R N 9020-R N 9020-16R Art.-No. CoCr N 9830-R X N 9810-16R X N 9820-16R Bei Produkten, die mit gekennzeichnet sind, handelt es sich um eingetragene Warenzeichen des entsprechenden Herstellers. Products indicated with are registered brand names of respective manufacturers.
12 PreFace -Abutments B-Serie R-Serie/R-Series compatible with Zimmer Tapered Screw-Vent MIS SEVEN (Innensechskant/Internal) BioHorizons (Innensechskant/Internal) VERGLEICHSTABELLE Zimmer Tapered Screw-Vent / MIS Seven / BioHorizons COMPARISON CHART Zimmer Tapered Screw-Vent / MIS Seven / BioHorizons Zimmer Tapered Screw-Vent Platform 3,5 mm Platform 4,5 mm Platform 5,7 mm Implantat/Implant Ø 3,70 4,10 4,70 6,00 Laborimplantat/Lab analog Ø 3,50 3,50 4,50 5,70 Artikelnummer/Article Number IA3 IA3 IA4 IA5 Medentika R-Serie/R-Series Laborimplantat/Lab analog 3,5 3,5 4,5 5,7 Artikelnummer/Article Number R 50 R 50 R 51 R 52 PreFace -Abutment 3,5 3,5 4,5 5,7 Artikelnummer/Article Number R 9000-R R 9000-R R 9010-R R 9020-16R R 9000-16R R 9000-16R R 9010-16R MIS Seven Narrow- Platform Standard- Platform Wide- Platform Implantat/Implant Ø 3,30 3,30 3,75 4,20 5,00 6,00 Laborimplantat/Lab analog Ø 3,30 4,20 4,20 4,20 4,50 4,50 Artikelnummer/Article Number MN-RSM10 MD-RSM10 MD-RSM10 MD-RSM10 MW-RSM10 MW-RSM10 Medentika R-Serie/R-Series Laborimplantat/Lab analog XX 3,50 3,50 3,50 4,50 4,50 Artikelnummer/Article Number XX R 50 R 50 R 50 R 51 R 51 PreFace -Abutment XX 3,50 3,50 3,50 4,50 4,50 Artikelnummer/Article Number XX R 9000-R R 9000-R R 9000-R R 9010-R R 9010-R XX R 9000-16R R 9000-16R R 9000-16R R 9010-16R R 9010-16R BioHorizons Platform 3,0 mm Platform 3,5 mm Platform 4,5 mm Platform 5,7 mm Implantat/Implant Ø 3,00 3,80 4,60 5,80 Laborimplantat/Lab analog Ø 3,00 3,50 4,50 5,70 Artikelnummer/Article Number TP3IA SYIA SGIA SBIA Medentika R-Serie/R-Series Laborimplantat/Lab analog XX 3,50 4,50 5,70 Artikelnummer/Article Number XX R 50 R 51 R 52 PreFace -Abutment XX 3,50 4,50 5,70 Artikelnummer/Article Number XX R 9000-R R 9010-R R 9020-16R XX R 9000-16R R 9010-16R Bei Produkten, die mit gekennzeichnet sind, handelt es sich um eingetragene Warenzeichen des entsprechenden Herstellers. Products indicated with are registered brand names of respective manufacturers.
PreFace -Abutments 13 R-Serie/R-Series Empfohlenes Drehmoment: 30 Ncm Recommended torque: 30 Ncm 3,5 3,5 4,5 4,5 5,7 Diameter (mm) 11,5 16 11,5 16 16 Art.-No. Titanium R 9000-R R 9000-16R R 9010-R R 9010-16R R 9020-16R Art.-No. CoCr X R 9800-16R X R 9810-16R R 9820-16R S-Serie/S-Series compatible with Astra Tech OsseoSpeed Empfohlenes Drehmoment 3,0: 15 Ncm / 3,5/4,0: 25 Ncm 4,5/5,0: 25 Ncm 3,0 3,5/4,0 3,5/4,0 4,5/5,0 4,5/5,0 Recommended torque 3,0: 15 Ncm / 3,5/4,0: 25 Ncm 4,5/5,0: 25 Ncm Diameter (mm) 11,5 11,5 16 11,5 16 Art.-No. Titanium S 9030-R S 9000-R S 9000-16R S 9020-R S 9020-16R Art.-No. CoCr S 9830-R X S 9800-16R X S 9820-16R Bei Produkten, die mit gekennzeichnet sind, handelt es sich um eingetragene Warenzeichen des entsprechenden Herstellers. Products indicated with are registered brand names of respective manufacturers.
14 PreFace -Abutments B-Serie T-Serie/T-Series compatible with Dentsply-Friadent Frialit/Xive Empfohlenes Drehmoment: 25 Ncm Recommended torque: 25 Ncm 3,4 3,8 3,8 Diameter (mm) 11,5 11,5 16 Art.-No. Titanium T 9000-R T 9005-R T 9005-16R Art.-No. CoCr T 9800-R X T 9805-16R 4,5 4,5 5,5 Diameter (mm) 11,5 16 16 Art.-No. Titanium T 9010-R T 9010-16R T 9020-16R Art.-No. CoCr X T 9810-16R T 9820-16R Bei Produkten, die mit gekennzeichnet sind, handelt es sich um eingetragene Warenzeichen des entsprechenden Herstellers. Products indicated with are registered brand names of respective manufacturers.
PreFace -Abutments 15 M-Implant Empfohlenes Drehmoment: 3,00: 15 Ncm 3,5-5,0: 25 Ncm 3,0 3,5-5,0 3,5-5,0 Recommended torque: 3,00: 15 Ncm 3,5-5,0: 25 Ncm Diameter (mm) 11,5 11,5 16 Art.-No. Titanium 1-90-02 2-90-02 2-90-03 Art.-No. CoCr 1-90-03 X 2-90-06
16 PreFace -Abutments B-Serie PreFace -Abutmenthalter PreFace -Abutment Holders
PreFace -Abutments 17 imes-icore 450i, 550i PreFace Abutmenthalter / Abutment Holder für/for: imes-icore 450i, 550i Die PreFace-Abutmenthalter müssen direkt beim Maschinenhersteller bestellt werden. PreFace-Abutment holders must be ordered directly from the machine manufacturer. imes-icore GmbH Im Leibolzgraben 16 D-36132 Eiterfeld imes-icore 750i PreFace Abutmenthalter / Abutment Holder für/for: imes-icore 750i Die PreFace-Abutmenthalter müssen direkt beim Maschinenhersteller bestellt werden. PreFace-Abutment holders must be ordered directly from the machine manufacturer. imes-icore GmbH Im Leibolzgraben 16 D-36132 Eiterfeld Datron D5 PreFace Abutmenthalter / Abutment Holder für/for: Datron D5 Die PreFace-Abutmenthalter müssen direkt beim Maschinenhersteller bestellt werden. PreFace-Abutment holders must be ordered directly from the machine manufacturer. DATRON AG In den Gänsäckern 5 D - 64367 Mühltal Bei Produkten, die mit gekennzeichnet sind, handelt es sich um eingetragene Warenzeichen des entsprechenden Herstellers. Products indicated with are registered brand names of respective manufacturers.
18 PreFace -Abutments B-Serie Röders RXD PreFace Abutmenthalter / Abutment Holder für/for: Röders RXD Die PreFace-Abutmenthalter müssen direkt beim Maschinenhersteller bestellt werden. PreFace-Abutment holders must be ordered directly from the machine manufacturer. Röders GmbH Scheibenstraße 6 29614 Soltau Wissner Gamma 202 PreFace Abutmenthalter / Abutment Holder für/for: Wissner Gamma 202 Die PreFace-Abutmenthalter müssen direkt beim Maschinenhersteller bestellt werden. PreFace-Abutment holders must be ordered directly from the machine manufacturer. Wissner GmbH August-Spindler-Straße 14 D-37079 Göttingen Dental Concept Systems DC5 ohne Wechsler/without changer PreFace Abutmenthalter / Abutment Holder für/for: Dental Concept Systems DC5 ohne Wechsler/without changer Die PreFace-Abutmenthalter müssen direkt beim Maschinenhersteller bestellt werden. PreFace-Abutment holders must be ordered directly from the machine manufacturer. Dental Concept Systems GmbH Buchbrunnenweg 26 D- 89081 Ulm Bei Produkten, die mit gekennzeichnet sind, handelt es sich um eingetragene Warenzeichen des entsprechenden Herstellers. Products indicated with are registered brand names of respective manufacturers.
PreFace -Abutments 19 Dental Concept Systems DC5 mit Wechsler/with changer PreFace Abutmenthalter / Abutment Holder für/for: Dental Concept Systems DC5 mit Wechsler/with changer Die PreFace-Abutmenthalter müssen direkt beim Maschinenhersteller bestellt werden. PreFace-Abutment holders must be ordered directly from the machine manufacturer. Dental Concept Systems GmbH Buchbrunnenweg 26 D- 89081 Ulm MB Maschinen Cobra Mill 5A1, 5M PreFace Abutmenthalter / Abutment Holder für/for: MB Maschinen Cobra Mill 5A1, 5M Die PreFace-Abutmenthalter müssen direkt beim Maschinenhersteller bestellt werden. PreFace-Abutment holders must be ordered directly from the machine manufacturer. MB Maschinen GmbH Zimmerwiesenweg 2/2a D- 63599 Biebergemünd Zubehör Equipment Prüfkörper Test block PreFace Abutmenthalter PreFace Abutment holder Artikel-Nummer Article Number M 20 Drehmomentschlüssel Torque wrench PreFace Abutmenthalter inkl. Einsatz SW 3,0 PreFace Abutment holder incl. insert SW 3,0 Artikel-Nummer Article Number M 21 Einsatz SW 3,0 für Drehmomentschlüssel Insert SW 3,0 for torque wrench Artikel-Nummer Article Number M 29 Bei Produkten, die mit gekennzeichnet sind, handelt es sich um eingetragene Warenzeichen des entsprechenden Herstellers. Products indicated with are registered brand names of respective manufacturers.
Medentika GmbH Hammweg 8 10 76549 Hügelsheim Tel.: +49 (0)72 29-69912-0 Fax: +49 (0)72 29-69912-20 E-Mail: info@medentika.de www.medentika.de Präzision und Funktionalität: Implantatkomponenten made in Germany