E lv lock va B MB-2 Mono M B - 2 H A n d s t E u E r v E n t i l
|
|
- Frank Armbruster
- vor 5 Jahren
- Abrufe
Transkript
1 MB-2 Monoblock valve MB-2 Handsteuerventil
2 Inhaltsverzeichnis MB-2 l Contents MB-2 echnische Daten echnical Data Installationshinweis Mounting Instruction rinzipieller Aufau Basic Construction 3 3 MB-2 Einlassventil Inlet Relief Schaltbilder Spool Options 6 ositionierer B B Side Spool ositioners 7-9 ositionierer A A Side Spool ositioners Einbaumaße Dimension 12 Leistungskurve erformance Chart 13 Bestellinformation Order Information 1 2
3 MB-2 kompakte Bauweise geringe Druckverluste hohe Lebensdauer und Wirtschaftlichkeit verschiedene Anschlussmöglichkeiten und Kreislaufsteuerungen langanhaltende Steuerungspräzision Monoblock Valve MB-2 compact construction low pressure drop long service life and efficiency various ports and curcuits long term accuracy echnische Daten l echnical Data Volumenstrom [l/min] Flow rate Max. Arbeitsdruck [bar] Max. Operating pressure Max. Gegendruck an ankanschluss [bar] Max. Back pressure on outletport emparaturbereich Einsatzmittel [ C] Fluid temperature range Viskosität [mm²/s] Viscosity NBR (BUNA-N) Dichtung NBR (BUNA-N) seal FM (Viton) Dichtung FM (Viton) seal Arbeitsbereich Operating range bis to bis to bis to 75 Min. 12 MB-2 Max. 00 Umgebungstemperatur [ C] Ambient temperature -0 bis 60-0 to 60 Installationshinweis l Mounting Instruction A B 3
4 rinzipieller Aufbau l Basic Construction MB-2 Grundkörper Body kits Einlassventil (optional) Inlet relief (optional) Schaltbild Spool options ositionierung B B Side spool positioners ositionierung A A Side spool positioners Grundkörper l Body Kits yp ype 1S 1 Sektion 1 Section
5 Einlassventil l Inlet Relief yp ype 3 Arbeitsbereich von 63 bis 200 Bar, Standardeinstellung 120 Bar Range 63 to 200 Bar, standard setting 120 Bar Max Ø 20. MB-2 Arbeitsbereich von 160 bis 315 Bar, Standardeinstellung 220 Bar Range 160 to 315 Bar, standard setting 220 Bar DBV pressure relief valve Max VS Verschlussstopfen Blanking plug Ø
6 Schaltbilder l Spool Options MB-2 A A A yp ype 1 3 ositionen, doppeltwirkend, A-B-- geschlossen in Nullstellung 3 ositions, double acting, with A-B-- closed in neutral position B C A A B 2 3 ositionen, doppeltwirkend, A-B- verbunden in Nullstellung, geschlossen 3 ositions, double acting, with A-B open to in neutral position, closed B A B C 3 3 ositionen, einfachwirkend an A, A-- geschlossen, B verschlossen 3 ositions, single acting on A, A-- closed in neutral position, B plugged B A C 3 ositionen, einfachwirkend an B, B geschlossen, A verschlossen 3 ositions, single acting on B, B closed in neutral position, A plugged B B C 6
7 ositionierer B l B Side Spool ositioners yp ype ositionen,rastung in os , ohne Federzentrierung 3 ositions, detent in pos , without spring centered 36 [1.2] MB ositionen, Rastung in os. 0-2, ohne Federzentrierung 2 ositions, detent in pos. 0-2, without spring centered [1.2] ositionen, Rastung in os. 1-0, ohne Federzentrierung 2 ositions, detent in pos. 1-2, without spring centered [1.2] 7
8 ositionierer B l B Side Spool ositioners yp ype 8 3 ositionen, Federzentierung zur Neutralstellung 3 ositions, spring return to neutral MB-2 36 [1.2] ositionen, Federzentierung zur Neutralstellung 2 ositions, spring return to neutral 36 [1.2] ositionen, Federzentierung zur Neutralstellung 2 ositions, spring return to neutral [1.2] 8
9 ositionierer B l B Side Spool ositioners yp ype ositionen, Rastung in os. 1-2, Federzentrierung 3 ositions, detent in pos. 1-2, spring centered 58.3 [2.3] MB ositionen, Rastung in os. 2, Federzentrierung 3 ositions, detent in pos. 2, spring centered 58.3 [2.3] ositionen, Rastung in os. 1, Federzentrierung 3 ositions, detent in pos. 1, spring centered 58.3 [2.3] 9
10 ositionierer A l A Side Spool ositioners MB-2 yp ype L Standardhandhebel Standard lever box 0 [1.57] 62.2 [2.5] 22.5 [0.89] 58 [2.28] 20 [0.79] 65.5 [2.58] SL Ohne Handhebel Without any cover Ø 9 0 [1.57] 8.75 [1.92] SL Staubschutzplatte, ohne Handhebel With dust-proof plate 9 [0.35] Ø 9 0 [1.57] 8.75 [1.92] 10
11 ositionierer A l A Side Spool ositioners yp ype KV Flexible Kabelverbindung (beinhaltet keine Kabel) Flexible cable connection (not include cable) Kabel Cable MB-2 KV Kit M6x1.0 M16x [ [3.15] 90 [3.5] 11
12 15 Einbaumaße MB-2 l Dimensions MB MB A B Anschlüsse orts A / B BS (Standard) G3/8 G3/8 G3/8 UN-UNF 3/-16 UNF-2B (SAE 8) 3/-16 UNF-2B (SAE 8) 3/-16 UNF-2B (SAE 8) Metrisch Metric M18x1.5 M18x1.5 M18x1.5 12
13 Leistungskurve MB-2 l erformance Curve Chart MB-2 Druckgefälle ressure drop 10 (bar) to Durchflussmenge Flow (l/min) MB-2 Druckgefälle ressure drop 10 (bar) ) to A(B) Durchflussmenge Flow (l/min) Druckgefälle ressure drop 10 (bar) to B(A) Durchflussmenge Flow (l/min) 13
14 Bestellinformation MB-2 l Order Information MB-2 MB-2 / 1-2 / 3 5 / 6 os. 1 1S os. 2 3 VS Grundkörper l Body kits 1 Sektion 1 Section Einlassventil l Inlet relief 63 bis 200 Bar, Standardeinstellung 120 Bar 63 to 200 Bar, standard setting 120 Bar 160 bis 315 Bar, Standardeinstellung 220 Bar 160 to 315 Bar, standard setting 220 Bar Verschlussstopfen Blanking port MB-2 os Schaltbilder l Spool options 3 ositionen, doppeltwirkend, A-B geschlossen 3 ositions, double acting, A-B closed 3 ositionen, doppeltwirkend, A-B- verbunden 3 ositions, double acting, A-B opten to 3 ositionen, einfachwirkend an A 3 ositions, single action on A 3 ositionen, einfachwirkend an B 3 ositions, single action on B os ositionierer B l B Side spool positioners 3 ositionen, Rastung in os ositions, detent in pos ositionen, Rastung in os ositions, detent in pos ositionen, Rastung in os ositions, detent in pos ositionen, Federzentrierung zur Neutralstellung 3 ositions, spring return to neutral 2 ositionen, Federzentrierung zur Neutralstellung 2 ositions, spring return to neutral 2 ositionen, Federzentrierung zur Neutralstellung 2 ositions, spring return to neutral 3 ositionen, Rastung in os. 1-2, Federzentriert 3 ositions, detent in pos. 1-2, spring centered 3 ositionen, Rastung in os. 2, Federzentriert 3 ositions, detent in pos. 2, spring centered 3 ositionen, Rastung in os. 1, Federzentriert 3 ositions, detent in pos. 1, spring centered os. 5 ositionierer A l A Side spool positioners L Standardhebel Standard lever box SL Ohne Handhebel Without any cover SL Staubschutzplatte, ohne Handhebel With dust-proof plate KV Flexible Kabelverbindung Flexible cable connection LCB Joystick Joystick os. 6 Anschluss l ort G-3 SAE 8 M18 G3/8 G3/8 3/-16 UNF-2B 3/-16 UNF-2B M18x1.5 M18x1.5 1
15 Notizen l Notes 15
MB-3 MONOBLOCK VALVE MB-3 HANDSTEUERVENTIL
M-3 M-3 HNDSEUERVENIL Inhaltsverzeichnis M-3 l ontents M-3 HNDSEUERVENILE echnische Daten echnical Data Installationshinweis Mounting Instruction rinzipieller ufau asic onstruction 3 3 4 Einlassventil
MehrE lv lock va B MB-4 Mono M B - 4 H A n d s t E u E r v E n t i l
M-4 Monoblock vlve M-4 Handsteuerventil Inhaltsverzeichnis M-4 l ontents M-4 Handsteuerventile echnische Daten echnical Data Installationshinweis Mounting Instruction rinzipieller ufau asic onstruction
MehrHandsteuerventil LMBV-2 Manual control valve LMBV-2
Handsteuerventil LMV- Manual control valve LMV- Merkmale Kompakte auweise Geringe Druckverluste Lange Lebensdauer und hoher Leistungsgrad Verschiedene nschlussmöglichkeiten und Schaltbilder Langfristige
MehrUmschaltventile Magnete
Umschaltventile Magnete DFE1/6 estellnr. Typ 2-11-12 DFE1/618ES-W22-12VDC 2-11-13 DFE1/618ES-W22-24VDC 24--116 DFE1/618ES-Y22-12VDC 24--117 DFE1/618ES-Y22-24VDC 24--1 DFE1/618ES-W22-12VDC 24--12 DFE1/618ES-W22-24VDC
MehrUmschaltventile Magnet
Umschaltventile Magnet DFE1/3 estellnr. Typ 2-11-1 DFE1/318ES-W22-12VDC 2-11-1 DFE1/318ES-W22-24VDC 24-2-116 DFE1/318ES-Y22-12VDC 24-2-117 DFE1/318ES-Y22-24VDC Weitere Umschaltventil Varianten auf nfrage
MehrP-07. Pneumatically operated valves 3/2-way, G 1/4, 1580 Nl/min (1.606 Cv) Technical data for series
3/2-way, G 1/4, Technical data for series -310-311 -312-320 -320-Q -322-322-Q Design and function Pneumatically operated spool valve. The valve switches upon pressurization of the pilot port (10 or 12).
Mehr3/2-Wege Coaxialventil 3/2-way coaxial valve. Baureihe 380 / 381 Type 380 / 381. fremdgesteuert externally controlled
fremdgesteuert externally controlled Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 50
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Bauart Schnellentlüftungsventil Nennweite DN 2,0 2,5 Schnellentlüftung DN 6,0 Druckbereich Gehäusewerkstoff
Mehrdiameter DN 2,0 6,0 0 max. 48bar (see table) body material brass, AISI 303, AISI 316
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Sitzventil Nennweite
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Sitzventil Nennweite
MehrInhaltsverzeichnis Index
Inhaltsverzeichnis Index Typ Type Seite Page FDL 7-1 FDR 7-2 FMR 7-3 7-0-1 Zahnradmengenteiler Rotary geared flow divider Zahnradmengenteiler Typ FDL Rotary geared flow divider type FDL Technische Daten
MehrBaureihe 280 / 281 / 282 Type 280 / 281 / 282
1 fremdgesteuert externally controlled Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10
MehrEinhebelsteuergerät 90l/min Datenblatt. Wegeventil. A1 Hydraulics GmbH Rudolf-Diesel-Str Radevormwald
A1 Hydraulics GmbH Rudolf-Diesel-Str. 1 42477 Radevormwald www.a1-hydraulics.de info@a1-hydraulics.com 02195-929 75 0 Wegeventil Einhebelsteuergerät 90l/min Datenblatt Technische Daten Maximale Druckeinstellung
Mehrdirektgesteuert direct acting
1 direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Sitzventil Nennweite
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Sitzventil Nennweite
MehrLVM92-EHP. Index. Elektrohydraulisches Frontladerventil. Produkteigenschaften. Spezifikation. Offenes System. Load Sensing. Hydraulische Eigenschaften
LVM92-EHP Elektrohydraulisches Frontladerventil Index Produkteigenschaften Spezifikation Offenes System Load Sensing Hydraulische Eigenschaften Leistungsdaten Kolbenausführungen Sekundärventile Joystick
Mehrdiameter DN 15 DN max. 25bar (see table) grey cast iron GG25, cast steel GS-C25N, stainless steel AISI 303
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Kolbenventil Nennweite
MehrInhaltsverzeichnis. Wegeventil 3 Serie CV 152
CV152/eng/EU/R0512 Inhaltsverzeichnis Seite 3 Allgemeine Informationen Seite 4 Technische Daten Seite 5 Kennlinien Seite 6 Hauptdruckbegrenzungsventil Seite 7-9 CV 152 mit Bowdenzugsteuerung Seite 10-12
Mehrdirektgesteuert direct acting
1 direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Sitzventil Nennweite
Mehr0,5 max. 16bar (see table) body material brass, AISI 303, AISI 316
servogesteuert pilot operated Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Nennweite DN 13 50
MehrP A max. 100bar A P max. 16bar
1 Schaltfunktion A: function A: direktgesteuert Modulbauweise NC (stromlos geschlossen) Schaltfunktion B: NC (normally closed) function B: NO (stromlos offen) NO (normally open) direct acting modular design
Mehr2/2-Wege Coaxialventil 2/2-way coaxial valve. Baureihe 286 Type 286. fremdgesteuert externally controlled
fremdgesteuert externally controlled Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 8 Druckbereich
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
direktgesteuert direct acting Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Nennweite DN 1,7 Druckbereich Gehäusewerkstoff Dichtwerkstoff Sitzventil mit Handnotbetätigung
Mehr2/2-Wege Coaxialventil 2/2-way coaxial valve. Baureihe 280-X / 281-X / 282-X Type 280-X / 281-X / 282-X. fremdgesteuert Modulbauweise
fremdgesteuert Modulbauweise Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) externally controlled modular
Mehr2/2-way solenoid valve - Type 218
- direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Sitzventil Nennweite
Mehrdirektgesteuert direct acting
1 direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Kolbenventil Nennweite
MehrA P max. 16bar P R max. 64bar R P max. 16bar
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 50 Druckbereich
MehrBaureihe 269 Type /2-Wege Coaxialventil 2/2-way coaxial valve. direktgesteuert direct acting. diameter DN Nennweite DN 10 32
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 32 Druckbereich
Mehr2/2-Wege Coaxialventil 2/2-way coaxial valve. Baureihe 269 Type 269. direktgesteuert direct acting
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 32 Druckbereich
MehrProportional Magnetventil BFW PROPORTIONAL MAGNETVENTILE BFW. Proportional Solenoid Valve BFW. Technische Daten l Technical Data
Proportional Magnetventil BFW Erhältlich in CETOP und CETOP Durchflussmenge CETOP :, oder 7 l/min Durchflussmenge CETOP :, 7 oder l/min Inkl. Befestigungsschrauben und Ventilstecker Grundplatten zu den
MehrBaureihe 464 Type Wege Kugelhahn pneumatisch betätigt 3-way ball valve pneumatic actuator
Bauart Nennweite DN 8 DN 50 Anschluss Kugelhahn mit pneumatischem Schwenkantrieb G1/4 G2 Betriebsdruck Messing: DN15 DN20 = PN30 DN25 = PN16 DN32 DN50 = PN10 Edelstahl: PN63 Gehäusewerkstoff Armatur: Edelstahl
MehrTechnische Daten Technical Data Overview
Technische Daten Technical Data Overview Nennweiten DIN 25-80 / SMS 25-102 / Zoll 1" - 4" Nominal sizes DIN 25-80 / SMS 25-102 / Inch 1" - 4" Werkstoffe Alle Edelstahlteile: AISI 316L (1.4404) O-Ring Dichtungen:
Mehr2/2-Wege Kunststoff-Magnetventil 2/2-way plastic solenoid valve. Baureihe 111 Type 111. direktgesteuert mit Trennmembrane flüssigkeitsgedämpft
direktgesteuert mit Trennmembrane flüssigkeitsgedämpft direct acting with isolating diaphragm fluid-damped Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Bauart Nennweite
MehrBaureihe 280 / 281 / 282 Type 280 / 281 / /2-Wege Coaxialventil 2/2-way coaxial valve. fremdgesteuert externally controlled
fremdgesteuert externally controlled Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 50
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 06/2012
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 Druckbereich
MehrRückschlagventile Serie VCP hydraulisch entsperrbar Check valves VCP range hydraulically pilot-operated
Rückschlagventile Serie VCP hydraulisch entsperrbar Check valves VCP range hydraulically pilot-operated Betriebsdruck bis 320 bar Working pressure up to 320 bar Nenndurchfluss bis 200 l/min Nominal flow
Mehr2/2-way solenoid valve - Type 239
servogesteuert pilot operated Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Bauart Nennweite DN 10 40 Druckbereich Gehäusewerkstoff Messing Dichtw erkstoff Sitzventil mit
Mehrdirektgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow
1 direktgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow Schaltfunktion A: NC (stromlos geschlossen) function A: NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
direktgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally
MehrMade in W-Germany. kv=0,12 l/min (NW 0,5) P2[bar] kv=0,45 l/min (DN 1) P2[bar] kv=0,70 l/min (NW 1,5) P2[bar]
NW 0,//, /- und /-Wege Sitzventile 0.//. mm Orifice /- and /-Way Poppet Valves Als Standard sind die Ventile in vielfältigen Ausführungen lieferbar z. B.: drei unterschiedliche Sockelformen (Standard-,
MehrMikro-Magnetventile Typ 65 NW 0,5/1/1,6/2 2/2- und 3/2-Wege Sitzventile Direktgesteuert
NW 0,//,6/ /- und /-Wege Sitzventile 0.//.6/ mm Orifice /- and /-Way Poppet Valves Als Standard sind die Ventile in vielfältigen Ausführungen lieferbar, z.b. drei unterschiedliche Sockelformen (Standard-,
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
zwangsgesteuert force pilot operated Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Nennweite DN
Mehrservogesteuert pilot operated
1 servogesteuert pilot operated Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: NO (stromlos offen) function B: NO (normally open) Bauart Sitzventil mit Membrandichtung
MehrCOUPLING TECHNOLOGY. Water Pneumatic Hydraulic Electrical TYPE COUPLING TECHNOLOGY
Water Pneumatic Hydraulic Electrical Accessories 2 Temperature Range - Temperaturbereich - C +180 C (+ F +356 F) Nitrile (V) - C +0 C (-4 F +2 F) Nitrile (N) - C +0 C (-4 F +2 F) EPDM (E) 0 C +270 C (+23
Mehr2/2-Wege Coaxialventil 2/2-way coaxial valve. Baureihe 270 / 271 / 272 Type 270 / 271 / 272. direktgesteuert direct acting. Nennweite DN 10 50
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 50 Druckbereich
Mehr2/2-Wege Kunststoff-Magnetventil 2/2-way plastic solenoid valve. Baureihe 135 Type 135
zwangsgesteuert, flüssigkeitsgedämpft force pilot operated, fluid-damped Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Bauart Nennweite DN 15 50 Druckbereich Gehäusewerkstoff
MehrMechanisch betätigte Ventile Typ 46 NW 2 3/2-Wege Sitzventile Direktgesteuert
NW /-Wege Sitzventile mm Orifice /-Way Poppet Valves Dieses Sitzventil wurde speziell für den Einsatz in Schalttafeln und Betätigungseinrichtungen entwickelt. Durch seinen sechseckigen Grundkörper ist
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
direktgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally
MehrAusgabe Version Bestnr. Order codes
Ausgabe Version Bestnr. Order codes 04.08 101 011... 5.1.1.1 2 Hydraulik / Hydraulics GRIEGER P T P1 T1 1. bar-version 1. bar version 2. bis zu 50 l/min 3. 4. Einstellung per Schraube oder Handknopf Vermeidung
MehrMechanisch betätigte Ventile Typ 74 NW 2 3/2-Wege Sitzventile Direktgesteuert
NW /-Wege Sitzventile mm Orifice /-Way Poppet Valves Dieses Sitzventil wurde speziell für den Einsatz in Schalttafeln und Betätigungseinrichtungen entwickelt. verschiedene Betätigungsmöglichkeiten (Stößel,
MehrDIN EN form A 230V 50Hz, 24V DC, special voltages voltage tolerance + / - 10% acc. VDE 0580 power consumption 230V 50Hz: 6,5VA 24V DC: 5W
servogesteuert pilot operated Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Nennweite DN 15 50
Mehr2/2-way plastic solenoid valve - Type 110
- direktgesteuert mit Trennmembrane direct acting with isolating diaphragm Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Bauart Nennweite DN 2,0 6,0 Druckbereich Sitzventil
Mehr2/2-Wege Kunststoff-Magnetventil 2/2-way plastic solenoid valve. Baureihe 148 Type 148
direktgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Bauart Nennweite DN 2,0 8,0 Druckbereich Gehäusewerkstoff
Mehr2/2-way plastic solenoid valve - Type 104
- direktgesteuert mit Trennmembrane direct acting with isolating diaphragm Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Bauart Nennweite DN 1,0 2,5 Druckbereich Gehäusewerkstoff
MehrPlanetenmotor Serie MP
Planetenmotor Serie MP Bestellnr. Typ Code - Planetenmotor 2ccm-W:Ø2-HD MP2CD - Planetenmotor 2ccm-W:Ø2-HD MP2CD -1 Planetenmotor 9,7ccm-W:Ø2-HD MP4CD -11 Planetenmotor 49,ccm-W:Ø2-HD MPCD -1 Planetenmotor
MehrPPV3 PUSH PULL VALVOLA POPPET VENTIL CLAPET. Caratteristiche tecniche. Technical data. Technische Merkmale. Caracteristiques techniques
PUSH PULL VALVOLA POPPET VENTIL CLAPET 104 PPV3 Caratteristiche tecniche I Norma: ISO 7241-1 A Ghiera: doppia azione Occlusione: valvola Aggancio: sfere radiali Materiale: acciaio Finitura: Zn-Fe (Cr III)
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 10/2015
direktgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow Schaltfunktion A: NC (stromlos geschlossen) function A: NC (normally closed) Bauart Nennweite DN 15 50 Druckbereich Gehäusewerkstoff Dichtwerkstoff
Mehrp/q-steuerblock für Regelpumpen p/q Manifold for load sensing pumps SAE 1" 3000 Ausgabe Version Bestnr. Order codes
p/q-steuerblock für Regelpumpen p/q Manifold for load sensing pumps SAE 1" 3000 Ausgabe Version 08.11 Bestnr. Order codes 101 093... 7.2.1.2 2 Hydraulik / Hydraulics Energie sparen! Erzeugen sie nur den
MehrEUROTEC Namur Solenoid Valve
Beschreibung Description - Kolbenschieber-Magnetventil NAMUR, indirekt gesteuert, 5/2- und 3/2-wege, mit Magnetspule und Gerätestecker mit Ausgang M16 für Kabeldurchmesser 5-6mm - Leichtes Umschalten von
MehrAutomation. Automation TYP ART TYPE ART. Pneumatic Actuators. Pneumatische Schwenkantriebe
Automation Pneumatische Schwenkantriebe Automation Pneumatic Actuators Doppelt- und einfachwirkende Ausführung: Federrücklauf, Federschließend / -öffnend Werkstoff: Aluminium Temperaturbereich: -20 C bis
MehrHandpumpen Hand pumps
Handpumpen Hand pumps Därmannsbusch D-5856 Witten / Postfach (P.O. Box) 365 D-58 Witten Telefon (Phone): +9 30 70-0 Telefax: +9 30 70-7 - von 8 bis ccm/doppelhub 8 up to ccm/double stroke - Betriebsdrücke
MehrOrbital Motor Katalog CPMH Orbital motor catalogue CPMH 27
Hydraulik Motor Hydraulic Motor Modell Längsschieberventil mit Geroller Geringes Startmoment und hoher Wirkungsgrad Flanschmonatge Internes Rückschlagventil Verschiedene Sonderausführungen möglich Spool
MehrNEW. TYPE. PAT. PENDING Safety type coupler with safety sleeve Sicherheitstyp Kupplung mit Schutzhülse COUPLING TECHNOLOGY
COUPING TECHNOOGY Water Pneumatic Hydraulic Electrical Accessories NEW PAT. PENDING Safety type coupler with safety sleeve Sicherheitstyp Kupplung mit Schutzhülse 1 COUPING TECHNOOGY QUICK COUPINGS FOR
MehrPVV3. Caratteristiche tecniche. Technical data. Technische Merkmale. Caracteristiques techniques
PVV3 180 Nominal size Max working pressure Rated flow Max flow rate Min burst pressure DNP BG ISO mm MPa l/min l/min MPa MPa MPa cc 06 1 6.3 5 45 12 17 190 270 250 0,8 10 2 10 8,5 40 23 46 130 150 180
MehrPLT4 ISO 16028/350 BAR VALVOLA PIANA FLAT FACE FLACHDICHTENDE CLAPET PLAT. Caratteristiche tecniche. Technical data. Technische Merkmale
ISO 16028/350 BAR VALVOLA PIANA FLAT FACE FLACHDICHTENDE CLAPET PLAT 22 PLT4 Caratteristiche tecniche I Norma: ISO 16028 HTMA (DN13) Occlusione: faccia piana Aggancio: sfere radiali Materiale: acciaio
MehrPLK4 ISO MASCHIO INNESTABILE IN PRESSIONE MALE CONNECTABLE UNDER PRESSURE STECKER UNTER DRUCK KUPPELBAR MALE ACCOUPLABLE SOUS PRESSION
43 ISO 16028 MASCHIO INNESTABILE IN PRESSIONE MALE CONNECTABLE UNDER PRESSURE STECKER UNTER DRUCK KUPPELBAR MALE ACCOUPLABLE SOUS PRESSION Caratteristiche tecniche PLK4 I Nominal size Max working pressure
MehrPlanetenrollermotor Serie MT
Planetenrollermotor Serie Bestellnr. Typ Code -02 Planetenrollermotor 161,1ccm-W:Ø40 160C -02 Planetenrollermotor 201,4ccm-W:Ø40 C -0 Planetenrollermotor 251,8ccm-W:Ø40 C -0 Planetenrollermotor 26,ccm-W:Ø40
MehrSpecification. DESIGN Pressure actuated needle valve with electropneumatic. OPERATION Continuous control
Technische Daten BAUFORM Druckgesteuertes Nadelventil mit aufgebautem Stellungsregler PG01. Specification DESIGN Pressure actuated needle valve with electropneumatic positioner. Artikel: AND STEUERFUNKTIONEN
MehrEx position switches with/without safety function // Ex 12
Features/Options Ex zone 1 and 21 Metal enclosure Snap action, change-over contact with single break Suitable for in-line mounting With pre-wired cable Gold-plated contacts available Available with hard-coated
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
Handbetätigt allseitig mit Innengewinde mit T- oder L- Bohrung hand actuated all ports female thread with T- or L- configuration Bauart Nennweite DN 10 50 Betriebsdruck Handhebel Gehäusewerkstoff Kugelwerkstoff
MehrPosition switch // ES 95 / EM 95
Features/Options Thermoplastic enclosure Horizontally slotted mounting holes Double insulated X ES 95: Slow action A, change-over contact, change-over contact with overlapping, 2 NC contacts or 2 NO contacts
MehrSERIE TST 102 CONNECTION
102 AT ACE & NON SPI ECKAGEREIE SCHNEKUPPUNG COUPINGS, MUTICOUPINGS & MOUD COOING PRODUCTS KUPPUNGEN, MUTIKUPPUNGEN & KUHUNGSEEMENTE UR WERKZEUGE Applications: * Cooling the mould and its components *
MehrDGR CE SICHERHEITSVENTILE PED CE SAFETY VALVES
DGR CE SICHERHEITSVENTILE PED CE SAFETY VALVES Ecksicherheitsventile aus Rotguss mit Nirofeder Typ 606 GF/GFL/tGF für neutrale Flüssigkeiten,Dampf und gasförmige Medien Safety valves made of red brass
MehrAGS10 MS100-2, AGS10 MS200-2, AGS10 TDS100-2 AGS10-2, AGS10E-2, AGS20-2, AGS50-2 WMZ5/10/15-2
6720816109 (2015/07) Lö DEEN AGS10 MS100-2, AGS10 MS200-2, AGS10 TDS100-2 AGS10-2, AGS10E-2, AGS20-2, AGS50-2 WMZ5/10/15-2 14.07.2015 1 6720816109 14.07.2015 2 6720816109 14.07.2015 3 6720816109 Inhaltsverzeichnis
Mehrp/q-steuerblock für Regelpumpen p/q Manifold for load sensing pumps SAE 1 1/4" Abb./Pic SAE1 3000
p/q-steuerblock für Regelpumpen p/q Manifold for load sensing pumps SAE 1 1/4" 6000 Abb./Pic SAE1 3000 Ausgabe Version 08.11 Bestnr. Order codes 101 095... 7.2.1.4 2 Hydraulik / Hydraulics Energie sparen!
MehrDurchflussmesser Flow meter. Typen / Types:
Typen / Types: 8010.1 8011.1 8012.1 8013.1 8014.1 8015.1 8016.1 8017.1 sera GmbH www.sera-web.com 1 D G A B Kabeldose M12x1-5-polig Socket M12x1-5 pins L l = 0,6 m Abmessungen: Typ 8010.1 EPDM Dimensions:
MehrInhaltsverzeichnis Lenkungen l Contents Steering Units
Inhaltsverzeichnis Lenkungen l Contents Steering Units CSU / CSUS 5 (T) CSU / CSUS 5 (T) 2-11 CSU 3/4/7 CSU 3/4/7 12-17 CSUS 3/4/8 CSUS 3/4/8 5 HMPV HMPV 23-28 HYDROSTATISCHE LENKEINHEIT Inhaltsverzeichnis
MehrERHARD is a company of. Datasheet ERHARD ECR check valve
ERHARD is a company of Datasheet The compact check valve for clamping The is clamped between two flanges as a reflux preventer. It has two vanes which, for example, open on starting a pump and will iediately
MehrPosition switch // ES 411 / EM 411
Features/Options Metal enclosure ES 411: Slow action A, change-over contact, change-over contact with overlapping or 2 NC contacts with double break EM 411: Snap action, change-over contact with double
MehrSchaltfunktion function. piping. Technische Änderungen vorbehalten / modifications reserved Stand / stand: 07/2012
fremdgesteuert externally controlled Schaltfunktion function Elektrischer Anschluss M12x1 electrical connector M12x1 Die Ventile arbeiten als Druckwaage und werden im Bypass eingesetzt. Der Mediumsdruck
MehrKEGEL-RÜCKSCHLAGVENTILE NON-RETURN-VALVES
28/07/5 TECH DATA SHEET 069 KEGEL- Gehäuse Valve Body Kegel Cone Dichtscheibe - Viton Sealing Ring Deckscheibe Plain Washer Druckfeder Compression Spring 8 Führung Valve Guide Kopf Valve Head Wichtige
MehrTECHNISCHE DATEN Drucksensor TECHNICAL DATA Pressure Sensor
TECHNISCHE DATEN Drucksensor TECHNICAL DATA Seite Modell Bauart Einstellbereiche Elektrischer Anschluß Page Model Design Setting range Electrical link 2 Typ 900 Drucksensor 0-1 bar, 0-10 bar, 0-100 bar,
MehrEx emergency pull-wire switches // Ex ZS 75 S
Features/Options Ex zone 1 and 21 Metal enclosure 2 or 4 contacts Wire length up to 2 x 100 m Release by push button (VD) Available without unlocking mechanism (per EN 60947-5-1) Wire pull and breakage
Mehrin2itiv Montage- und Bedienungsanleitung Mounting- and operating instructions in2aqua GmbH
1 in2itiv - und Bedienungsanleitung - and operating instructions instructions de montage et d utilisation Instructiones de montaje y de uso 9043 1 00 0 in2aqua GmbH Königstrasse 26 70173 Stuttgart, Germany
MehrTECHNICAL DATA SHEET. Drinking water unit TS-S1000 TS-S TS-S TS-S TS-S Basic unit. Hydraulic diagram
THNIAL ATA SHT rinking water unit TS-S1000 TS-S1000-14 TS-S1000-20 TS-S1000-30 TS-S1000-40 asic unit Hydraulic diagram omestic hot water home rinking water from the line Heating flow, primary Heating return,
MehrHydraulische einstellbare Druckbegrenzungsventile D Hydraulically adjustable pressure relief valves D
Hydraulische einstellbare Druckbegrenzungsventile D Hervorragende Dichtheit Geringe Druckverluste Kompakte Bauweise Hoch dynamisch belastbar Beliebige Öffnungsdrücke Anschlagdämpfung Lange Lebensdauer
MehrVolumenstrom l/min. Volumenstrom l/min. Volumenstrom l/min
echnische Daten Filtergehäuse (Werkstoffe) Kopf: luminium Deckel: Nylon Filtertopf: Nylon Filtergehäuse Δp Druckverlust Die dargestellten Kurven beziehen sich auf Mineralöl mit einer Dichte von 0.86 kg/dm
Mehrp/q-steuerblock für Regelpumpen p/q Manifold for load sensing pumps SAE 1 1/2" Abb./Pic SAE1 3000
p/q-steuerblock für Regelpumpen p/q Manifold for load sensing pumps SAE 1 1/2" 6000 Abb./Pic SAE1 3000 Ausgabe Version 08.11 Bestnr. Order codes 101 096... 7.2.1.5 2 Hydraulik / Hydraulics Energie sparen!
MehrTYPE COUPLING TECHNOLOGY One hand Connection Push-pull Disconnection Eine Hand Kuppeln Push-Pull Lösen COUPLING TECHNOLOGY
COUPING TECHNOOGY One hand Connection Push-pull Disconnection Eine Hand Kuppeln Push-Pull ösen Water Pneumatic Hydraulic Electrical Accessories 4 COUPING TECHNOOGY ...... QUICK COUPINGS FOR TEMPERATURE
MehrOIL-FREE MEDICAL compressors
OIL-FREE MEDICAL compressors AIR FOR LIFE DK50 DS BASIC STANDARD ADVANCED kleiner und kompakter Medizinkompressor small and compact medical compressor ALARM Temperatur Druck Strom ALARMS temperature pressure
MehrTechnical data. tri-matic.ch
TRI-CONTROL VALVE M5 Drosselventile TCV Drosselrückschlagventile TCCV Throttle valves TCV Throttle non-return valves TCCV Technische Daten Funktion: Drossel- bzw. Drosselrückschlagventil Montage: am Zylinder
MehrSpecification. DESIGN Swing check valves for return fl ow prevention in piping systems to be mounted directly between fl anges acc. to DIN.
Technische Daten BAUFORM Rückschlagklappen zur Rückfl ussverhinderung in Rohrleitungssystemen für den Einbau zwischen DIN Flanschen. ANSCHLUß Flansch DN32 DN500 bemessen für Flansch nach PN16 BETRIEBSDRUCK
MehrSICHERHEITSVENTILE OHNE BAUTEILPRÜFUNG SAFETY VALVES WITHOUT TEST CERTIFICATE. Type 602 E / Type 601 T for liquids, gaseous media and steam
Ecksicherheitsventile aus Rotguss Angular safety valves made of red brass Typ 602 E / Typ 601 T für Flüssigkeiten, gasförmige Medien und Dampf Type 602 E / Type 601 T for liquids, gaseous media and steam
MehrN DI SEZIONI N OF SECTIONS ANZAHL ELEMENTE MD1 180 (2610) bar (psi) 5 (73) bar (psi) 14 (0.55") 85 (3.3") 70 (2.75") 9 (0.35") 85 (3.
MD DISRIUORI MONOLOCCO MONOLOCK DIRECIONL VLVES MONOLOCKSEUERGERÄE DI ECNICI ECHNICL D ECHNISCHE MERKMLE DIMENSIONI SIZE MESSUNGEN ortata nominale (max) Nominal flow (max) Nominaler Durchfluß (max) ressione
MehrSpecification. DESIGN Body consists of one part MR3400xx approval acc. to 1935/2004/EC. CONNECTION Female thread 1 /4" up to 4" acc.
Technische Daten BAUFORM -teilige Körperkonstruktion MRxx mit Zulassung nach 9//EG ANSCLUSS Innengewinde: /" bis " nach ISO EINBAULAGE Beliebig, vorzugsweise für waagerechten oder senkrechten Einbau. Durchfl
Mehr(DIN EN / AISI 303)
1 Kabelverschraubungen Progress rostfreier Stahl A Langes Anschlussgewinde metrisch Cable glands Progress stainless steel A Long entry thread metric CrNi Stahl A CrNi stainless steel A Dichtung: TPE Seal:
Mehr