Armaturen GmbH Armaturen, Rohre, Sonderteile aus Edelstahl fittings, pipes, special parts of stainless steel
|
|
- Elizabeth Richter
- vor 5 Jahren
- Abrufe
Transkript
1 Armaturen, Rohre, Sonderteile aus Edelstahl fittings, pipes, special parts of stainless steel EHÄLTERARMATUREN
2 seit 1983 produzieren wir Armaturen und Sonderteile aller Art aus Edelstahl für die Lebensmittel-, Chemie-, Pharmaund Kosmetikbranche zur Vervollständigung unserer Produktpalette wurde mit der Übernahme der Franz Vogel Armaturenfabrik im Jahr 1995 ein weiterer Schritt in Richtung Angebotsvergrößerung und Kompetenzsicherung getan die 100-jährige Erfahrung und Tradition im Bau von Sicherheitsbauteilen für Drucktanks konnten wir erfolgreich in den Bereich Behälterarmaturen integrieren BEHALTERARMATUREN TANK EQUIPMENT since 1983 M&S has been producing stainless steel fittings and special parts for the food-, chemical,- pharmaceutical and cosmetics industries in order to complete the product range M&S took over the Franz Vogel fittings factory in That meant a further step towards increasing product range and competence a hundred years experience and tradition of designing safety components for pressure tanks were integrated successfuly into the product group tank equipment at M&S
3 PROGRAMM PROGRAMME Im Lieferprogramm Behälterarmaturen bieten wir Ihnen folgende Komponenten in unterschiedlichen Ausführungen an: Be- und Entlüftungsventile Federsicherheitsventile Hähne KZE-Armaturen Probierventile RBE-Armaturen RLV-Armaturen Sicherheitsarmaturen Sprühköpfe Spunddruckregler Standanzeigen sowie Zubehör Vakuumventile In our delivery programme tank equipment we offer you the following components in different types: ventilating valves safety valve spring loaded cocks fittings for short time heating test valves cleaning gas-/degas-fittings cleaning-air valve combination safety fittings spray balls bungings pressure regulators level indicators vacuum valves
4 Federsicherheitsventile (FeSiVe) werden überwiegend zum Schutz von Tanks gegen einen unzulässigen Überdruck eingesetzt erfüllen alle die Anforderungen der Druckgeräterichtlinie 97/23/EG sowie des AD2000 Regelwerks und sind TÜV bauteilgeprüft sind grundsätzlich senkrecht zu installieren (auf Wunsch auch für horizontale Einbaulagen erhältlich) werden mit fest eingestellten Ansprechdrücken ausgeliefert (variabel einstellbare Ansprechdrücke sind ebenfalls realisierbar) sind als Normal -Sicherheitsventile eingestuft VENTILE VALVES Federsicherheitsventil Hycom FeSiVe safety valve spring loaded Hycom SaVaSpLo Safety valve spring loaded (SaVaSpLo) mainly employed for securing tanks against an inadmissible overpressure all M&S safety valves spring loadeds are type test approved by the TÜV and meet the requirements acc. to European PED 97/23/EG and the AD2000- regulations generally SaVaSpLo have to be mounted in vertical position, but are also available for horizontal installation on request valves are supplied with a constantly set response pressure, but on request valves with variable adjustable response pressures are also supplied are classified as normal safety valves
5 VENTILE VALVES Standard Federsicheitsventil zugelassen für nicht giftige Gase, Dämpfe und neutrale, nicht klebende Flüssigkeiten in einem Gehäuse lieferbar mit konstantem als auch einstellbarem Druck Ausstattung: manuelle Anlüftung; optional pneumatische Anlüftung Nennweiten: DN 25 bis DN 100 Werkstoff: / oder Dichtungen: FDA-konform in den Werkstoffen NBR, EPDM, FKM und PTFE erhältlich standard safety valve spring loaded allowed for non toxic gas, steam and neutral non-sticky liquids in one housing available with constant and adjustable response pressure equipped with a manual lifting; pneumatic lifting as option dimensions: DN 25 to DN 100 material: / or gaskets: FDA-conform available in the materials NBR, EPDM, FPM, PTFE Hycom Federsicherheitsventil hygienische Ausführung für die sterile Verfahrenstechnik sowie Prozesse mit besonderen Reinheitsanforderungen Ausstattung: manuelle Anlüftung; optional pneumatische Anlüftung Nennweiten: DN25 bis DN 100 Werkstoff der produktberührten Ventilteile: ; optional Oberflächengüte der produktberührten Ventilteile Ra 0,8µm; auf Wunsch auch Ra 0,4µm CIP- und SIP-fähig totraumfrei Hycom Federsicherheitsventil hygienic construction for aseptic process engineering as well as for processes with special cleanness requirements equipped with manual or pneumatic lifting dimensions: DN25 bis DN 100 material of parts with contact to medium: ; as option interior of the valve with contact to medium: Ra 0,8µm; on request also Ra 0,4µm suitable for CIP and SIP free of dead spots
6 Vakuumventile werden zur Absicherung von Tanks gegen einen unzulässigen hohen Unterdruck (Vakuum) eingesetzt wir bieten eine Vielzahl unterschiedlicher Bauarten an, die auf dem Prinzip der Federoder Gewichtsbelastung beruhen weisen eine hohe Ansprechempfindlichkeit aufgrund der reibungsarmen Mechanik auf zeichnen sich durch einfache Bauweise, hohe Funktionssicherheit, geringe Verschmutzungsneigung und leichte Reinigungsmöglichkeiten aus sind je nach Ausführung in Nennweiten DN 25 bis DN 300 lieferbar Werkstoff: AISI 304/304L / VENTILE VALVES vacuum valves are used for securing tanks against an inadmissible high underpressure (vacuum) we offer a wide variety of vacuum valves which are based on the principle of springload and/or weight load a high response sensitivity is given due to the low-friction mechanics of the valves their outstanding features are the simple design, a high operational reliability, a low susceptibility to dirt and easy cleaning possibilities are available in the dimensions from DN 25 to DN 300 depending on the article material: AISI 304/304L / Bodensitzventile bieten wir in der Produktgruppe Ventile und Kugelhähne an werden mittels Tankeinschweißflansch unmittelbar im Zentrum des Behälterbodens montiert; der Ventilteller schließt bündig mit dem Behälter des Bodens ab Nennweiten: DN 10 bis DN 100 Ausstattung: Handrad; optional auch mit Winkelgetriebe oder auch pneumatischen Antrieb; zusätzliche Ausrüstung mit PTFE- Faltenbalg ebenfalls möglich Werkstoff: AISI 316L bottom seat valves are offered in the productgroup valves and ball cocks bottom seat valves are directly mounted to the bottom centre of a tank; the valve disc closes flush with the bottom of the tank dimensions: DN 10 to DN 100 equipped with a handle resp. an angular gear or with a pneumatic actuator; even a set-up with a PTFE bellow is possible material: AISI 316L
7 ARMATUREN FITTINGS Ventilkombinationen und Reinigungsarmaturen Sicherheitsarmaturen für Hochdrucktanks, die bei der Herstellung von Sekt Anwendung finden Kurzzeit- Erhitzungsanlagen (KZE-Armaturen) combination of valves and cleaning fittigs safety fittings for tanks used in the production of champagne short-time heating systems (KZE-fittings) Reinigungs-Luft- Ventilkombinationen (RLV-Armaturen) für die Reinigung, Be- und Entgasung von Behältern Reinigungs-/Be- und Entlüftungsarmaturen (RBE-Armaturen) in unterschiedlichsten Ausbaustufen cleaning-air valve combinations (RLV-fittings) for cleaning, gas- and degasing of tanks cleaning gas-/degasfittings (RBE-fittings) are offered with various stages of completion Werkstoff: AISI 304/304L / diverses Zubehör (Sprühköpfe etc.) lieferbar material: AISI 304/304L / plenty of accessories like spray balls etc.
8 Sämtliche Einzelkomponenten sind auch in Kombination auf sogenannten Domdeckeln erhältlich. Wir liefern Ihnen komplett bestückte Domdeckel nach Ihrer Vorgabe (wenn nötig auch TÜV-geprüft) DOMDECKEL TANK DOME COVER All components can also be combined and mounted onto a tank dome cover. We supply completely equipped dome covers as per customer s request (also TÜV-approved)
9 Armaturen, Rohre, Sonderteile aus Edelstahl fittings, pipes, special parts of stainless steel Industriestraße D Friedeburg fon + 49 (0) fax + 49 (0) mail: info@ms-armaturen.de M&S - 11/ Änderungen und Druckfehler vorbehalten / Subject to alterations and misprints
KÖLNER ARMATURENHANDEL e. K.
Vertrieb industrieller Erzeugnisse maschineller & manueller Herstellung aus Edelstahl EHÄLTERARMATUREN Seit 1983 produziert M&S Armaturen und Sonderteile aller Art aus Edelstahl für die Lebensmittel-,
MehrKÖLNER ARMATURENHANDEL e. K.
Vertrieb industrieller Erzeugnisse maschineller & manueller Herstellung aus Edelstahl YCOM FEDERSICHERHEITSVENTIL stetig steigende Ansprüche an die Produktqualität der pharmazeutischen, chemischen und
MehrArmaturen GmbH. Armaturen, Rohre, Sonderteile aus Edelstahl fittings, pipes, special parts of stainless steel
Armaturen, Rohre, Sonderteile aus Edelstahl fittings, pipes, special parts of stainless steel YCOM FEDERSICHERHEITSVENTIL KONTAKT CONTACT Postanschrift Kommunikation M&S Armaturen GmbH Industriestraße
MehrDGR CE SICHERHEITSVENTILE PED CE SAFETY VALVES
DGR CE SICHERHEITSVENTILE PED CE SAFETY VALVES Ecksicherheitsventile aus Rotguss mit Nirofeder Typ 606 GF/GFL/tGF für neutrale Flüssigkeiten,Dampf und gasförmige Medien Safety valves made of red brass
MehrFLY Klemmverbindungen FLY Clamp pipe connections
FLY Klemmverbindungen FLY Clamp pipe connections Dichtring Gasket Klammer Clamping ring FLY Flansch FLY Flange FLY Flansch FLY Flange Einsatzgebiete Die von LINNEMANN entwickelten FLY Klemmverbindungen
MehrSICHERHEITSVENTILE OHNE BAUTEILPRÜFUNG SAFETY VALVES WITHOUT TEST CERTIFICATE. Type 602 E / Type 601 T for liquids, gaseous media and steam
Ecksicherheitsventile aus Rotguss Angular safety valves made of red brass Typ 602 E / Typ 601 T für Flüssigkeiten, gasförmige Medien und Dampf Type 602 E / Type 601 T for liquids, gaseous media and steam
Mehr9 Behälterarmaturen 9 tank equipment
9 Behälterarmaturen 9 tank equipment 9 INFORMATION INFORMATION Hygienische Prozesse erfordern hochwertige Armaturen. Hier kommen z.b. unsere HyCom-Federsicherheitsventile (Blatt 9.05 9.06) zum Einsatz.
MehrPRODUCT PROGRAMME PRODUKTPROGRAMM. Armaturen GmbH Armaturen, Rohre, Sonderteile aus Edelstahl fittings, pipes, special parts made of stainless steel
Armaturen, Rohre, Sonderteile aus Edelstahl fittings, pipes, special parts made of stainless steel www.ms-armaturen.de PRODUKTPROGRAMM PRODUCT PROGRAMME UBERSICHT OVERVIEW Die M&S Armaturen GmbH wurde
MehrArmaturen GmbH Armaturen, Rohre, Sonderteile aus Edelstahl fittings, pipes, special parts of stainless steel l
Armaturen, Rohre, Sonderteile aus Edelstahl fittings, pipes, special parts of stainless steel l Filter, Schaugläser, Ventile filters, sight glasses, valves fon: + 49 (0) 44 65 8 07 0 fax: + 49 (0) 44
MehrÜBERSTRÖMVENTILE OVERFLOW VALVES. Type 618 T / Type 619 E for liquids, steam and gaseous media
ÜBERSTRÖMVENTILE UND REGELVENTILE OVERFLOW VALVES AND CONTROL VALVES Überström-/Regelventile aus Rotguss mit Nirofeder Overflow/control valves made of red brass with stainless steel spring Typ 618 T /
MehrÜberströmventil Pressure Relief Valve. Version: Liquid and gas-tight valve bonnet Ventilgehäuse aus Rotguss
SP 80 R R Direkt wirkendes, federbelastetes Ecküberströmventil, für Dampf und gasförmige Medien sowie Flüssigkeiten. eständig gegen Öl, bleifreies enzin und enzol Direct-action, spring loaded angle relief
Mehr5.3.1 Vakuumventile Hygienische Sicherheitsventile Aseptische Sicherheitsventile
Vakuum- und Sicherheitsventile Vacuum and Safety Valves 5.3. Vakuumventile 5.3. Hygienische Sicherheitsventile 5.3.3 Aseptische Sicherheitsventile 5.3. Vacuum Valves 5.3. Hygienic Safety Valves 5.3.3 Aseptic
MehrSpecial design for bulk solids, Hygienic Design acc. to EHEDG-Guidelines
Special design for bulk solids, Hygienic Design acc. to EHEDG-Guidelines Operation purpose: The disc valve is used for dust tight and (as an option) pressure tight locking of a hopper with bulk solids,
MehrKugelhähne Ball-valves
163 Ball-valves Features u u unterschiedliche Baureihen für flexible Anwendungen Mini- auch mit Steckanschluss u u Various lines for flexible applications Mini ball valves also with plug connection 164
Mehr7. Ventile. Valves. 7.1 Ecküberströmventil 135 overflow valve. 7.2 Bodensitzventil 137 bottom seat valve
7. Ventile Valves Seite page 7.1 Ecküberströmventil 135 overflow valve 7.2 Bodensitzventil 137 bottom seat valve 7.3 Tellerrückschlagventil 139 check valve / non return disk valve 7.4 Probenahmeventil
MehrBaureihe 464 Type Wege Kugelhahn pneumatisch betätigt 3-way ball valve pneumatic actuator
Bauart Nennweite DN 8 DN 50 Anschluss Kugelhahn mit pneumatischem Schwenkantrieb G1/4 G2 Betriebsdruck Messing: DN15 DN20 = PN30 DN25 = PN16 DN32 DN50 = PN10 Edelstahl: PN63 Gehäusewerkstoff Armatur: Edelstahl
MehrEinsitzventile SVP M2000. Single Seat Valves SVP M2000. Ventiltechnik für jeden Einsatzbereich. Valve Technology for Every Application Area 2.
Einsitzventile SVP M2000 Ventiltechnik für jeden Einsatzbereich Inhalt.0 Allgemeine Informationen und technische Daten.1 Eck-, Doppeleck- und Kreuzventile.2 Entnahme- und Durchgangsventile.3 Schrägsitz-
MehrKlemmverbindungen DIN 32676, Flansch Ø Clamp pipe connections DIN 32676, flange Ø
Klemmverbindungen DIN 32676, Flansch Ø 34-319 Clamp pipe connections DIN 32676, flange Ø 34-319 Klemm-Dichtung Clamp gasket Klammer Clamping ring Klemmstutzen Clamp ferrule Klemmstutzen Clamp ferrule Einsatzgebiete
MehrArmaturen GmbH Armaturen, Rohre, Sonderteile aus Edelstahl fittings, pipes, special parts of stainless steel l
Armaturen, Rohre, Sonderteile aus Edelstahl fittings, pipes, special parts of stainless steel l Montagezubehör installation accessories fon: + 49 (0) 44 65 8 07 0 fax: + 49 (0) 44 65 8 07 40 7 Montagezubehör
MehrFlexibel, schnell und preiswert durch eigene Konstruktion, Modellbau und Gießerei
Armaturen für Industrie und Schiffbau Valves and fittings for industry and shipbuilding Stand 09/2007 Flexibel, schnell und preiswert durch eigene Konstruktion, Modellbau und Gießerei Flexible, fast and
MehrInhaltsverzeichnis Index
Sicherheits- / Entlastungsventile, für Lebensmittel - Pharmazie Safety- / Relief-Valves, Food - pharmacy 5 Inhaltsverzeichnis Index Ventil Valve Typ 44 Verwendung Use Entlastungsventil, federbel. Lebensmittel
MehrSpecification. DESIGN Body consists of one part MR3400xx approval acc. to 1935/2004/EC. CONNECTION Female thread 1 /4" up to 4" acc.
Technische Daten BAUFORM -teilige Körperkonstruktion MRxx mit Zulassung nach 9//EG ANSCLUSS Innengewinde: /" bis " nach ISO EINBAULAGE Beliebig, vorzugsweise für waagerechten oder senkrechten Einbau. Durchfl
MehrArmaturen GmbH. 6 Filter, Schaugläser, Laternen, Ventile 6 filters, sight glasses, lanterns, valves.
fon: + 49 (0) 44 65 8 07 0 fax: + 49 (0) 44 65 8 07 40 6 Filter, Schaugläser, Laternen, Ventile 6 filters, sight glasses, lanterns, valves 6 fon: + 49 (0) 44 65 8 07 0 fax: + 49 (0) 44 65 8 07 40 INFORMATION
MehrP A max. 100bar A P max. 16bar
1 Schaltfunktion A: function A: direktgesteuert Modulbauweise NC (stromlos geschlossen) Schaltfunktion B: NC (normally closed) function B: NO (stromlos offen) NO (normally open) direct acting modular design
MehrEHEDG. Aseptische und hygienische Quetschventile. Aseptic and hygienic Pinch Valves. zertifiziert/certified
EED zertifiziert/certified Aseptische und hygienische Quetschventile Aseptic and hygienic Pinch Valves Rohranschweißende / Weld-on end Klemmstutzen / Tri-Clamp Flansch / Flange ewindestutzen / Threaded
MehrEHEDG. Aseptische und hygienische Quetschventile Serie VMCE. Aseptic and hygienic Pinch Valves of VMCE Series. zertifiziert/certified
EED zertifiziert/certified Aseptische und hygienische Quetschventile Serie VMCE Aseptic and hygienic Pinch Valves of VMCE Series Rohranschweißende / Weld-on end Klemmstutzen / Tri-Clamp Flansch / Flange
Mehrdirektgesteuert direct acting
1 direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Kolbenventil Nennweite
MehrBronze BR - B 584 Spring: Stainless steel / AISI 316 Valve disc: Stainless steel / AISI 316 L
Technische Daten BAUFORM -teilige Körperkonstruktion, Zwischenflanschbauweise mit breiter Dichtfl äche nach DIN. ANSCHLUß DN 5 bis DN EINBAULAGE Beliebig, vorzugsweise für waagerechten oder senkrechten
MehrBelüftungsventile / Unter- und Überdruckventile Vacuum Relief Valves / Vacuum- and Pressure Relief Valves. Inhaltsverzeichnis Index
Belüftungsventile / Unter- und Überdruckventile Vacuum Relief Valves / Vacuum- and ressure Relief Valves 12 Inhaltsverzeichnis Index Ventil Valve Typ 9 Typ 90 Typ 91 Verwendung Use Belüftungsventil Vacuum-
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
Handbetätigt allseitig mit Innengewinde mit T- oder L- Bohrung hand actuated all ports female thread with T- or L- configuration Bauart Nennweite DN 10 50 Betriebsdruck Handhebel Gehäusewerkstoff Kugelwerkstoff
MehrMikro-Magnetventile Typ 65 NW 0,5/1/1,6/2 2/2- und 3/2-Wege Sitzventile Direktgesteuert
NW 0,//,6/ /- und /-Wege Sitzventile 0.//.6/ mm Orifice /- and /-Way Poppet Valves Als Standard sind die Ventile in vielfältigen Ausführungen lieferbar, z.b. drei unterschiedliche Sockelformen (Standard-,
Mehrdiameter DN 2,0 6,0 0 max. 48bar (see table) body material brass, AISI 303, AISI 316
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Sitzventil Nennweite
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
zwangsgesteuert force pilot operated Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Nennweite DN
MehrZubehör / Accessoires. Zubehör Accessoires
Zubehör / Accessoires 105 Zubehör Accessoires Fugenprofile und Design-Fugenprofile / Featrue strips and design strips 107 Fugenprofile Feature strips Design-Fugenprofile Design strips Zur Betonung der
MehrEHEDG. Aseptische und hygienische Quetschventile Serie VMCE. Aseptic and hygienic Pinch Valves of VMCE Series. zertifiziert/certified
EED zertifiziert/certified Aseptische und hygienische Quetschventile Serie VMCE Aseptic and hygienic Pinch Valves of VMCE Series Rohranschweißende / Weld-on end Klemmstutzen / Tri-Clamp Flansch / Flange
Mehrdiameter DN 15 DN max. 25bar (see table) grey cast iron GG25, cast steel GS-C25N, stainless steel AISI 303
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Kolbenventil Nennweite
Mehrfilter/sight glasses Filter/Schaulaternen
pipes Rohre 1 pipe unions Rohrverbindungen 2 fittings Rohrformstücke 3 TC-fittings TC-Verbindungen 4 butterfly valves Scheibenventile 5 cocks/pigging systems Hähne/Molchsysteme 6 seat valves Ventile 7
MehrGLASS LINING TECHNOLOGIES. Armaturen. Valves
Armaturen Valves Armaturen Valves Bezeichnung Blatt Kugelhahn VHK 1 Membranventil VM 2 Schrägsitzventil VSK 3 Schrägsitzventil mit Faltenbalg VSF 4 Schauglas SG 5 Kompaktschauglas (runde Schauglasarmatur
MehrHochdruck-Kupplungen Typ HDK Type HDK high-pressure couplings
Hochdruck-Kupplungen Typ HDK Type HDK high-pressure couplings DN 6 bis 32 bis max. PN 450 bar DN 6 to 32 to max. PN 450 bar Für besondere Druckbelastung Robuste Bauweise hervorragende Durchflußleistung
Mehr0,5 max. 16bar (see table) body material brass, AISI 303, AISI 316
servogesteuert pilot operated Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Nennweite DN 13 50
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 10/2015
direktgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow Schaltfunktion A: NC (stromlos geschlossen) function A: NC (normally closed) Bauart Nennweite DN 15 50 Druckbereich Gehäusewerkstoff Dichtwerkstoff
MehrKompakt doppelt exzentrische Kugelhähne Compact double offset Ball Valves
Kompakt doppelt exzentrische Kugelhähne Compact double offset Ball Valves Kompakt doppelt exzentrisch, 3 teilig, weichdichtend Compact double offset, 3 parts body, soft sealing Type: KGH DN: 200 1200 (8
MehrRohrkupplungen und Fittings Tube couplings and fittings
Rohrkupplungen und Fittings Tube couplings and fittings Rohrkupplung Tube coupling Rohrenden Tube ends Rohr Tube Rohr Tube Einsatzgebiete Die Rohrkupplungen werden insbesondere bei Förder- und Produktionsanlagen
MehrButterfly Valve Type AK03 / AK04
Butterfly Valve Type AK03 / AK04 description: Butterfly valve to control a liquid or gaseous media in a pipeline system. features: - suitable for neutral and not neutral gaseous & liquid media - Maintenance
MehrA P max. 16bar P R max. 64bar R P max. 16bar
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 50 Druckbereich
MehrBaureihe 269 Type /2-Wege Coaxialventil 2/2-way coaxial valve. direktgesteuert direct acting. diameter DN Nennweite DN 10 32
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 32 Druckbereich
MehrERHARD is a company of. Datasheet ERHARD ECR check valve
ERHARD is a company of Datasheet The compact check valve for clamping The is clamped between two flanges as a reflux preventer. It has two vanes which, for example, open on starting a pump and will iediately
Mehr2/2-Wege Coaxialventil 2/2-way coaxial valve. Baureihe 269 Type 269. direktgesteuert direct acting
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 32 Druckbereich
Mehrdirektgesteuert direct acting
1 direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Sitzventil Nennweite
MehrMade in W-Germany. kv=0,12 l/min (NW 0,5) P2[bar] kv=0,45 l/min (DN 1) P2[bar] kv=0,70 l/min (NW 1,5) P2[bar]
NW 0,//, /- und /-Wege Sitzventile 0.//. mm Orifice /- and /-Way Poppet Valves Als Standard sind die Ventile in vielfältigen Ausführungen lieferbar z. B.: drei unterschiedliche Sockelformen (Standard-,
Mehrfilter/sight glasses Filter/Schaulaternen
pipes Rohre 1 pipe unions Rohrverbindungen 2 fittings Rohrformstücke 3 TC-fittings TC-Verbindungen 4 butterfly valves Scheibenventile 5 cocks/pigging systems Hähne/Molchsysteme 6 seat valves Ventile 7
MehrEHEDG zertifiziert / cert.
(Original - DEUTSC / ERMAN) (Translation - ENLIS) EED zertifiziert / cert. Aseptische und hygienische Quetschventile Serie VMCE Aseptic and hygienic Pinch Valves of VMCE Series Rohranschweißende / Weld-on
MehrRückschlagklappen Kunststoff Swing check valves plastic
Übersicht / Overview Baureihe Type Ausführung Design Gehäuse: PVC-U Klappe: Feder: PVC-U Edelstahl.7, Hastelloy C (.0) Dichtungen:NBR, EPDM, FPM (Viton) oder PTFE Druckbereich: 0 bis bar Body: Disc: Spring:
MehrSchaltfunktion function. piping. Technische Änderungen vorbehalten / modifications reserved Stand / stand: 07/2012
fremdgesteuert externally controlled Schaltfunktion function Elektrischer Anschluss M12x1 electrical connector M12x1 Die Ventile arbeiten als Druckwaage und werden im Bypass eingesetzt. Der Mediumsdruck
Mehr2/2-Wege Kunststoff-Magnetventil 2/2-way plastic solenoid valve. Baureihe 148 Type 148
direktgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Bauart Nennweite DN 2,0 8,0 Druckbereich Gehäusewerkstoff
Mehr2/2-Wege Coaxialventil 2/2-way coaxial valve. Baureihe 270 / 271 / 272 Type 270 / 271 / 272. direktgesteuert direct acting. Nennweite DN 10 50
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 50 Druckbereich
MehrAttenuator and Distribution System Zehnder ComfoWell 220
Benefits All air treatment functions available: attenuator, fine filter, active carbon filter, manifold box Modular design Compact dimensions Easy to clean Components connected with sliding profiles for
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
direktgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally
MehrOPERATING INSTRUCTIONS Test pump ZG 5.1. and ZG 5.2.
Elektromotoren und Gerätebau Barleben GmbH OPERATING INSTRUCTIONS Test pump ZG 5.1. and ZG 5.2. Elektromotoren und Gerätebau Barleben GmbH 2 Inhaltsverzeichnis Page 1 Use 4 2 Design features 4 2.1 Test
MehrDeceleration Technology. Rotary Dampers mit hohem Drehmoment WRD-H 2515 WRD-H 3015 WRD-H 4025 WRD-H
Rotary Dampers mit hohem Drehmoment WRD-H 2515 WRD-H 3015 WRD-H 4025 WRD-H 6030 Deceleration Technology ONLINE CALCULATION AND 2D / 3D CAD DOWNLOAD M m L F Benefits Material: - Aluminium and steel Applications:
MehrDeceleration Technology. Rotary Dampers with high-torque range WRD-H 7550 WRD-H 9565 WRD-H
Rotary Dampers with high-torque range WRD-H 7550 WRD-H 9565 WRD-H 12070 Deceleration Technology ONLINE CALCULATION AND 2D / 3D CAD DOWNLOAD M m L F Benefits Material: - Aluminium and steel Applications:
MehrSpecification. FACE TO FACE LENGTH Acc. to EN row 20.
Technische Daten Specification BAUFORM 1-teiliges Zentriergehäuse, mit auswechselbarer Manschette zum Einklemmen zwischen zwei Flansche nach EN 1092-1 Typ 11 Form B (PN10 oder PN16); andere auf Anfrage.
MehrKipp Rückschlagklappe Tilting Check Valve
Kipp Rückschlagklappe Tilting Check Valve Mit Dämpfung / with damping system Type: 8 RK, 8 RK M, 8 RK E DN: 100 1400 (4 56 ) PN: 10 25 (Class 125 150) Temp: 0 C +80 C FALKNER Armaturenvertriebs GmbH Tel:
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Sitzventil Nennweite
MehrBROEN BALLOMAX PN40, DN 15-50
Dealing with forces of nature BROEN BALLOMAX PN40, DN 15-50 Auf Wunsch auch mit Knebelgriff. Available with T-handle upon request. Beidseitig Flansche Vollverschweißter Stahlkugelhahn Materialbeschreibung
MehrSicherheitsventile mit Federbelastung Spring Loaded Safety Valves. Si 2501
Sicherheitsventile mit Federbelastung Spring Loaded Safety Valves Si 2501 Allgemeines General 1) Entsprechend Richtlinie 97/23/EG des Europäischen Parlaments und des Rates vom 29. Mai 1997 (DGRL) 02.1998
Mehrfilter/sight glasses Filter/Schaulaternen
pipes Rohre 1 pipe unions Rohrverbindungen 2 fittings Rohrformstücke 3 TC-fittings TC-Verbindungen 4 butterfly valves Scheibenventile 5 cocks/pigging systems Hähne/Molchsysteme 6 seat valves Ventile 7
MehrISO-K Klammerflanschverbindungen DIN ISO 1609 ISO-K Clamping flange pipe connections DIN ISO 1609
ISO-K Klammerflanschverbindungen DIN 28404 + ISO 1609 ISO-K Clamping flange pipe connections DIN 28404 + ISO 1609 Klammerschraube Claw-clamp Klammerflansch Clamp flange O-Ring O-Ring Innenzentrierring
MehrGODI. Gleitring-O-Ring-Dichtsatz, innendichtend Slide and O-Ring Seal, Inside Sealing. Slide and O-Ring Seal, inside sealing
Gleitring-O-Ring-Dichtsatz, innendichtend Slide and O-Ring Seal, inside sealing Der Hunger Gleitring-O-Ring-Dichtsatz ist ein schmalbauendes Element zur Abdichtung von Stangen. Er ist für einfache und
MehrSpecification. OPERATION Rotation of the handwheel.
Technische Daten BAUFORM -teilige, verschraubte Körperkonstruktion hochwertige Sitzdichtung aus PTFE auch nach Richtlinie //EG lieferbar mit Regelkegel als handbetätigtes Regelventil verwendbar (Option)
MehrAdvantages reliable operation simple fitting usable for applications with a pressure of 1600 bar
1HP 1HP-A Anwendung Rohrprüfanlagen Vorteile Zuverlässige Funktion Einfache Montage Für Anwendungen bis 1600 bar einsetzbar Application Pipe testing machines Advantages reliable operation simple fitting
Mehr3/2-Wege Coaxialventil 3/2-way coaxial valve. Baureihe 380 / 381 Type 380 / 381. fremdgesteuert externally controlled
fremdgesteuert externally controlled Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 50
MehrKuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogs or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Sitzventil Nennweite
MehrPOR. Präzisions-O-Ring Precision O-Ring
POR Die Hunger e und Rundschnurringe werden für statische Abdichtungen eingesetzt. Durch eine große Auswahl geeigneter Dichtungswerkstoffe werden Dichtungsprobleme bei verschiedenen Druckmedien, Drücken
Mehrdirektgesteuert direct acting
1 direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Sitzventil Nennweite
Mehrdirektgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow
1 direktgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow Schaltfunktion A: NC (stromlos geschlossen) function A: NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally
MehrArmaturen GmbH. Die M&S Armaturen GmbH wurde im Januar 1983 gegründet. M&S Armaturen was established in January 1983.
M&S Armaturen GmbH, Friedeburg, 2008 Die M&S Armaturen GmbH wurde im Januar 1983 gegründet. Die M&S Armaturen GmbH produziert Armaturen sowie Sonderteile aller Art aus Edelstahl für die Lebensmittelindustrie,
MehrDeceleration Technology. Rotary Dampers with high-torque range WRD-H 0607 WRD-H 0805 WRD-H 1208 WRD-H 1610 WRD-H
Rotary Dampers with high-torque range WRD-H 67 WRD-H 85 WRD-H 128 WRD-H 161 WRD-H 21 Deceleration Technology ONLINE CALCULATION AND 2D / 3D CAD DOWNLOAD M m L F Benefits Applications: - Mechanical and
MehrThrottle Pedal System. Gaspedal-System
Gaspedal-System Throttle Pedal System Die Konzeption dieser Gasbetätigung ist einzigartig, denn das Gaskabel ist komplett im Pedal integriert. Das bedeutet: Betätigung des Gaskabels erfolgt innerhalb des
MehrINNOVATIVE PRESSURE COMPETENCE Deaerator & sludge trap
Technoflex Topcat-Topcat Duo Degasification Sludge removal Microbubble deaeration Magnetic dirt trap Deaerator & sludge trap Barnova deaerator and sludge trap accessories Air and dirt have to come out!
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
direktgesteuert direct acting Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Nennweite DN 1,7 Druckbereich Gehäusewerkstoff Dichtwerkstoff Sitzventil mit Handnotbetätigung
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
direktgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally
Mehr2/2-Wege Coaxialventil 2/2-way coaxial valve. Baureihe 286 Type 286. fremdgesteuert externally controlled
fremdgesteuert externally controlled Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 8 Druckbereich
MehrConnecting bend 90 connecting bend parts that serve as a connection between the hydraulic separator and the compact manifold.
Technical data sheet MultiFlow Expert Components of the MultiFlow Expert - hydraulic separator - connecting bends - multiple compact manifolds [D] Manufacturer certification Description MultiFlow Expert
Mehr2/2-way plastic solenoid valve - Type 104
- direktgesteuert mit Trennmembrane direct acting with isolating diaphragm Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Bauart Nennweite DN 1,0 2,5 Druckbereich Gehäusewerkstoff
MehrHANDTMANN KOMPONENTEN
HANDTMANN ARMATURENFABRIK HANDTMANN KOMPONENTEN Ventile und Armaturen für hygienische Prozesse - Technische Daten UNSERE ERFAHRUNG - IHRE SICHERHEIT Produkte für Ihre Branche Weltweit vertrauen Brauereien,
MehrMaterials Standard Alternatives
Diaphragm Valve A1a/w Diaphragm Valve A1a/w Available sizes DN 15 - DN 350, PN 10. Diaphragm valve without stuffing box. Spindle enclosed, entirely protected against medium, non rising handwheel. Flanges
Mehr2/2-way solenoid valve - Type 218
- direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Sitzventil Nennweite
MehrCLAMP-Dokumentation CLAMP-Documentation. TRI-FIT CLAMP Tri-Clamp Fittings aus Edelstahl Tri-Clamp stainless steel fittings. tri-matic.
CLAMP-Dokumentation CLAMP-Documentation All information in this document can be changed without notice Seite / Page 1 Schweissstutzen 055 Welded hexagon nipple 055 Material: V4A Stahl / AISI 316L / DIN
MehrFlexibel, schnell und preiswert durch eigene Konstruktion, Modellbau und Gießerei
Armaturen für Industrie und Schiffbau Valves and fittings for industry and shipbuilding Flexibel, schnell und preiswert durch eigene Konstruktion, Modellbau und Gießerei Flexible, fast and low prices because
MehrLebensmittelfühler Food probes
Lebensmittelfühler werden u.a. in Brauereien, Molkereien, Keltereien und Käsereien sowie in der Biotechnologie und Pharmazie eingesetzt. Um den speziellen Bedürfnissen der Lebensmittel-, Getränke- und
MehrFlansch-Hebel-Sicherheitsventile
Flansch-Hebel-Sicherheitsventile Flanged Safety Valves with Lever and Weight Inhalt Contents Type Seite/Page Normal-Sicherheitsventil Safety Relief Valve mit Hebel und Gewicht bis PN 40 with Lever and
MehrP-07. Pneumatically operated valves 3/2-way, G 1/4, 1580 Nl/min (1.606 Cv) Technical data for series
3/2-way, G 1/4, Technical data for series -310-311 -312-320 -320-Q -322-322-Q Design and function Pneumatically operated spool valve. The valve switches upon pressurization of the pilot port (10 or 12).
MehrZehnder ComfoWell 220
Benefits All air treatment functions available: attenuator, fine filter, active carbon filter, manifold box Modular design Compact dimensions Easy to clean Components connected with sliding profiles for
MehrNewest Generation of the BS2 Corrosion/Warning and Measurement System
Newest Generation of the BS2 Corrosion/Warning and Measurement System BS2 System Description: BS2 CorroDec 2G is a cable and energyless system module range for detecting corrosion, humidity and prevailing
MehrTechnical details subject to change without notice / Tolerances acc. to DIN/ANSI standards, other dimensions approximate
Check Valve B4w / wafer type Check Valve B4w available sizes DN 50 up to DN 250, PN 10, wafer type execution disc replaceable, with reinforced steel inlet for assembling between flanges acc. to DIN EN
Mehr