EHEDG. Aseptische und hygienische Quetschventile Serie VMCE. Aseptic and hygienic Pinch Valves of VMCE Series. zertifiziert/certified
|
|
- Jens Kraus
- vor 7 Jahren
- Abrufe
Transkript
1 EED zertifiziert/certified Aseptische und hygienische Quetschventile Serie VMCE Aseptic and hygienic Pinch Valves of VMCE Series Rohranschweißende / Weld-on end Klemmstutzen / Tri-Clamp Flansch / Flange ewindestutzen / Threaded spigot Das flexible Baukastensystem Aseptische Ausführung für hygienische Prozesse Anschlüsse: Rohranschweißenden Flanschanschluss Klemmstutzen ewindestutzen (Milchrohrgewinde) The flexible modular system Aseptic design for hygienic safe processes Connections: Weld-on ends Flange Tri-Clamp Threaded Spigot (RJT)
2 Pneumatisches Quetschventil Serie VMCE Air operated Pinch Valve VMCE Series Die neuen aseptischen Quetschventile Serie VMCE von AKO bestechen durch Ihr hygienisches Design. ervorragende Reinigbarkeit, ein flexibles Baukastensystem, sowie die Langlebigkeit der Quetschventilmanschette sind nur drei Vorteile dieser Quetschventilserie. In Rohrleitungen eingebaut übernehmen sie entweder eine absolut dichte Auf-Zu-Absperrfunktion oder können mit ilfe eines elektropneumatischen Proportionalventils zur groben Regelung oder Dosierung eines Produktstroms eingesetzt werden. Erhältlich sind die pneumatischen Quetschventile Serie VMCE in den Nennweiten The new AKO aseptic Pinch Valves of Series VMCE captivate by their sanitary design. Excellent cleanability, a flexible modular system, as well as the longevity of the pinch valve sleeve are only three of the advantages of this Pinch Valve Series. Installed in pipes, they take either an absolutely tight open-close shut-off function or can be used with the help of an electro-pneumatic proportional valve for coarse control or dosage of a product stream. The air operated Pinch Valves Series VMCE are available in nominal sizes EED zertifiziert Die neuen Quetschventile zeichnen sich durch reinigungsfreundliches ( CIP-fähig), sterilisierbares ( SIP-fähig) und bakteriendichtes Design gemäß EED-Zertifizierung Typ EL Klasse I und Typ EL Aseptik Klasse I aus. Des Weiteren sind die VMCE Quetschventile molchbar (RIP-fähig). EED certified The new pinch valves are characterized by an easy-to-clean ( CIP), sterilizable ( SIP-capable), and bacteria-tight design in accordance with EED certification type EL Class I and Type EL ASEPTIC Class I. Furthermore, the VMCE pinch valves are piggable (RIP). Betriebs-/ Mediumsdruck max: Steuer- /Schließdruck max: Differenzdruck: variiert je nach Nennweite ~ 6 bar 8 bar 2-2,5 bar Operating / medium pressure max.: Control / closing pressure max.: Differential pressure: varies depending on diameter ~ 6 bar 8 bar bar Die pneumatischen Quetschventile der Serie VMCE erfüllen alle Anforderungen der Druckgeräterichtlinie 97/23/E. The air operated Pinch Valves of VMCE series fulfill all requirements of the Pressure Equipment Directive 97/23/EC. Z.A. des Tuiliers 5, rue ilardoni 6820 Retzwiller France Tel/Phone: +33 (0) Fax: +33 (0) DB_pV_VMCE_DE+EN_ _AKO F
3 Pneumatisches Quetschventil - Anschweißenden (R) Air operated Pinch Valve - Weld-on ends (R) DIN EN ISO 228 "" Anschweißenden nach DIN 850 Reihe 2 Edelstahl.4408 Anschweißende: Edelstahl.4404 Ventilbaulänge: 0: Nach DIN EN 558 Reihe : Nach DIN EN 2982 Reihe : Nach DIN EN 558 Reihe 7 Weld-on ends according to DIN 850 row 2 Stainless steel.4408 Weld-on ends: Stainless steel.4404 Valve face to face length: 0: Acc. to DIN EN 558 row : Acc. to DIN EN 2982 row : Acc. to DIN EN 558 row 7 D L Z.A. des Tuiliers 5, rue ilardoni 6820 Retzwiller France Tel/Phone: +33 (0) Fax: +33 (0) ewicht x, /8" 23 0,03 0, x, /8" 28 0,05 0, x, /8" 32 0,07, x, /8" 37 0,09, x, /4" 45 0,3, x, /4" 50 0,22 2, x, /4" 60 0,36 3, x /4" 74 0,44 4, x /4" 90 0,88 6, x /4" 07,80,3 3 DB_pV_VMCE_DE+EN_ _AKO F
4 Pneumatisches Quetschventil - Anschweißenden (RA) Air operated Pinch Valve - Weld-on ends (RA) DIN EN ISO 228 "" Anschweißenden nach ASTM A554 Weld-on ends according to ASTM A554 Edelstahl.4408 Stainless steel.4408 Anschweißende: Edelstahl.4404 Weld-on ends: Stainless steel.4404 D L Z.A. des Tuiliers 5, rue ilardoni 6820 Retzwiller France Tel/Phone: +33 (0) Fax: +33 (0) ewicht 0 7, , ,6 4 /8" 23 0,03 0,5 5 9, , ,0 5 /8" 28 0,05 0,8 20 5, , ,4 6 /8" 32 0,07, , , ,4 6 /8" 37 0,09, , , ,2 8 /4" 50 0,22 2, , , ,6 9 /4" 60 0,36 3, , , ,6 9 /4" 74 0,44 4, , , ,4 /4" 90 0,88 6, , , ,2 3 /4" 07,80,6 4 DB_pV_VMCE_DE+EN_ _AKO F
5 Pneumatisches Quetschventil - Flansch (RF) Air operated Pinch Valve - Flange (RF) (a / b) DIN EN ISO 228 "" Flanschanschluss nach DIN (BF) DIN Form A (BF) (40-50) Flange connection according to DIN (BF) DIN form A (BF) (40-50) Edelstahl.4408 Stainless steel.4408 Flansche: Edelstahl.4404 Flange: Stainless steel.4404 Di D nb ø d Z.A. des Tuiliers 5, rue ilardoni 6820 Retzwiller France Tel/Phone: +33 (0) Fax: +33 (0) ø TK L ewicht /8" 23 0,03 0, /8" 28 0,05, /8" 32 0,07, /8" 37 0,09 2, /4" 45 0,3 2, /4" 50 0,22 3, /4" 60 0,36 4, /4" 74 0,44 5, /4" 90 0,88 7, /4" 07,80 4,2 Anzahl Bohrungen / Number of holes 5 DB_pV_VMCE_DE+EN_ _AKO F
6 Pneumatisches Quetschventil - Klemmstutzen (RT) Air operated Pinch Valve - Tri-Clamp connection (RT) DIN EN ISO 228 "" Klemmstutzen nach DIN (BKS) Tri-Clamp according DIN (BKS) Edelstahl.4408 Stainless steel.4408 Klemmstutzen: Edelstahl.4404 Tri-Clamp Connection: Stainless steel.4404 D L Z.A. des Tuiliers 5, rue ilardoni 6820 Retzwiller France Tel/Phone: +33 (0) Fax: +33 (0) ewicht /8" 23 0,03 0, /8" 28 0,05 0, , /8" 32 0,07, , /8" 37 0,09, , /4" 45 0,3 2, /4" 50 0,22 3, , /4" 60 0,36 4, /4" 74 0,44 5, /4" 90 0,88 7, /4" 07,80 3,0 6 DB_pV_VMCE_DE+EN_ _AKO F
7 Pneumatisches Quetschventil - ewindestutzen (RM) Air operated Pinch Valve - Threaded spigot (RM) DIN EN ISO 228 "" ewindestutzen nach DIN 853- (S) Threaded spigot according DIN 853- (S) Edelstahl.4408 Stainless steel.4408 ewindestutzen: Edelstahl.4404 Threaded spigot: Stainless steel.4404 D D3 Z.A. des Tuiliers 5, rue ilardoni 6820 Retzwiller France Tel/Phone: +33 (0) Fax: +33 (0) L ewicht Rd28x/8" /8" ,03 0, Rd34x/8" /8" ,05, Rd44x/6" /8" ,07, Rd52x/6" /8" ,09, Rd58x/6" /4" ,3 2, Rd65x/6" /4" ,22 3, Rd78x/6" /4" ,36 4, Rd95x/6" /4" ,44 5, Rd0x/4" /4" ,88 7, Rd30x/4" /4" ,80 3,0 7 DB_pV_VMCE_DE+EN_ _AKO F
EHEDG. Aseptische und hygienische Quetschventile. Aseptic and hygienic Pinch Valves. zertifiziert/certified
EED zertifiziert/certified Aseptische und hygienische Quetschventile Aseptic and hygienic Pinch Valves Rohranschweißende / Weld-on end Klemmstutzen / Tri-Clamp Flansch / Flange ewindestutzen / Threaded
MehrEHEDG. Aseptische und hygienische Quetschventile Serie VMCE. Aseptic and hygienic Pinch Valves of VMCE Series. zertifiziert/certified
EED zertifiziert/certified Aseptische und hygienische Quetschventile Serie VMCE Aseptic and hygienic Pinch Valves of VMCE Series Rohranschweißende / Weld-on end Klemmstutzen / Tri-Clamp Flansch / Flange
MehrPneumatisches Quetschventil Serie VMC Air operated Pinch Valve of VMC Series
New! Pneumatisches Quetschventil Serie VMC Air operated Pinch Valve of VMC Series Flansch / Flange Innengewinde / Internal Thread Klemmstutzen / Tri-Clamp Anschweißenden / Weld-on ends ewindestutzen /
MehrPneumatisches Quetschventil Typ VMC Air operated Pinch Valve type VMC
New! Pneumatisches Quetschventil Typ VMC Air operated Pinch Valve type VMC Flansch / Flange Innengewinde / Internal Thread Klemmstutzen / Tri-Clamp Anschweißenden / Weld-on ends ewindestutzen / Threaded
MehrPneumatisches Quetschventil Typ VMC Air operated Pinch Valve type VMC
New! Pneumatisches Quetschventil Typ VMC Air operated Pinch Valve type VMC ewindestutzen / Threaded spigot Anschweißenden / Weld-on ends Klemmstutzen / Tri-Clamp Innengewinde / Internal Thread Flansch
MehrPneumatisches Quetschventil Serie VMC Air operated Pinch Valve of VMC Series
New! Pneumatisches Quetschventil Serie VMC Air operated Pinch Valve of VMC Series Flansch / Flange Innengewinde / Internal Thread Klemmstutzen / Tri-Clamp Anschweißenden / Weld-on ends ewindestutzen /
MehrPneumatisches Quetschventil Typ VMC Air operated Pinch Valve type VMC
New! Pneumatisches Quetschventil Typ VMC Air operated Pinch Valve type VMC Flansch / Flange Innengewinde / Internal Thread Klemmstutzen / Tri-Clamp Anschweißenden / Weld-on ends ewindestutzen / Threaded
MehrPneumatisches Quetschventil Typ VMC Air operated Pinch Valve type VMC
New! Pneumatisches Quetschventil Typ VMC Air operated Pinch Valve type VMC Flansch / Flange Innengewinde / Internal Thread Klemmstutzen / Tri-Clamp Anschweißenden / Weld-on ends ewindestutzen / Threaded
MehrPneumatisches Quetschventil Serie VMC Air operated Pinch Valve of VMC Series
New! Pneumatisches Quetschventil Serie VMC Air operated Pinch Valve of VMC Series Flansch / Flange Innengewinde / Internal Thread Klemmstutzen / Tri-Clamp Anschweißenden / Weld-on ends ewindestutzen /
MehrPneumatisches Quetschventil Typ VMC Air operated Pinch Valve type VMC
New! Pneumatisches Quetschventil Typ VMC Air operated Pinch Valve type VMC Flansch / Flange Innengewinde / Internal Thread Klemmstutzen / Tri-Clamp Anschweißenden / Weld-on ends ewindestutzen / Threaded
MehrPneumatische Quetschventile Air operated Pinch Valves
Pneumatische Quetschventile Air operated Pinch Valves Anschlussausführungen: Connection options: Flanschanschluss Flange Connection Innengewindeanschluss Internal Thread Connection Klemmstutzen Tri-Clamp
MehrHOCHLEISTUNGSQUETSCHVENTILE TYP RV HIGH PERFORMANCE PINCH VALVES TYPE RV
HOCHLEISTUNGSQUETSCHVENTILE TYP RV HIGH PERFORMANCE PINCH VALVES TYPE RV EIGENSCHAFTEN Nennweite: DN - 1 mm Baulänge: DIN, ASME, ISO Betriebsdrücke: 1 - bar Auf/Zu-Ventile Regelventile (elektrisch/ elektro-pneumatisch)
MehrSpecification. FACE TO FACE LENGTH Acc. to EN row 20.
Technische Daten Specification BAUFORM 1-teiliges Zentriergehäuse, mit auswechselbarer Manschette zum Einklemmen zwischen zwei Flansche nach EN 1092-1 Typ 11 Form B (PN10 oder PN16); andere auf Anfrage.
MehrSpecification. OPERATION Rotation of the handwheel.
Technische Daten BAUFORM -teilige, verschraubte Körperkonstruktion hochwertige Sitzdichtung aus PTFE auch nach Richtlinie //EG lieferbar mit Regelkegel als handbetätigtes Regelventil verwendbar (Option)
MehrPSA SEGURO Flexikeil-Absperrschieber PSA SEGURO Flexible Wedge Gate Valve
PSA SEGURO Flexikeil-Absperrschieber PSA SEGURO Flexible Wedge Gate Valve Typ (Type) GSAL DN 40 500 PN 10 250 mit Flanschen oder Anschweißenden DN 40 500 PN 10 250 with flanges or welding ends - Ausführung
MehrSpecification. DESIGN 2/2-way diaphragm valve with optional fl ow direction
Technische Daten BUFORM 2/2-Wege Membranventil mit beliebiger Durchl ussrichtung BETÄTIUN 1. Manuelle Betätigung durch ein andrad mit integrierter Stellungsanzeige. 2. Pneumatische Betätigung: Steuerunktion:
Mehrdiameter DN 15 DN max. 25bar (see table) grey cast iron GG25, cast steel GS-C25N, stainless steel AISI 303
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Kolbenventil Nennweite
Mehr5.3.1 Vakuumventile Hygienische Sicherheitsventile Aseptische Sicherheitsventile
Vakuum- und Sicherheitsventile Vacuum and Safety Valves 5.3. Vakuumventile 5.3. Hygienische Sicherheitsventile 5.3.3 Aseptische Sicherheitsventile 5.3. Vacuum Valves 5.3. Hygienic Safety Valves 5.3.3 Aseptic
MehrFließbett Fluidizing bed
» Engineering your success «Zeppelin Systems GmbH Einsatzgebiete Pneumatisches Auflockerungssystem zur Austragung schwer fließfähiger aber gut fluidisierbarer Schüttgüter (mehlartig und pulverförmig),
MehrSpecification. OPERATION Rotation of the handwheel.
Technische Daten BAUFORM -teilige, verschraubte Körperkonstruktion hochwertige Sitzdichtung aus PTFE auch nach Richtlinie //EG lieferbar mit Regelkegel als handbetätigtes Regelventil verwendbar (Option)
MehrRohrschieber mit Schließfeder Slide Valve spring loaded
Rohrschieber mit Schließfeder Slide Valve spring loaded Rohrschieber als automatisches Entlüftungsventil Slide Valve as automatic air relief valve Type: RSF DN: 50 300 (2 12 ) PN: 16 160 (Class 150 900)
MehrP-07. Pneumatically operated valves 3/2-way, G 1/4, 1580 Nl/min (1.606 Cv) Technical data for series
3/2-way, G 1/4, Technical data for series -310-311 -312-320 -320-Q -322-322-Q Design and function Pneumatically operated spool valve. The valve switches upon pressurization of the pilot port (10 or 12).
MehrERHARD is a company of. Datasheet ERHARD ECR check valve
ERHARD is a company of Datasheet The compact check valve for clamping The is clamped between two flanges as a reflux preventer. It has two vanes which, for example, open on starting a pump and will iediately
MehrMechanische Schlauchquetschventile Serie OV Mechanical Pinch Valves of OV Series
Serie OV of OV Series Mechanische Schlauchquetschventile: Armaturenlösung zum Absperren und Regeln Selbst größere Feststoffpartikel werden von der besonders verschleißfesten und korrosionswiderstandsfähigen
MehrBaureihe 464 Type Wege Kugelhahn pneumatisch betätigt 3-way ball valve pneumatic actuator
Bauart Nennweite DN 8 DN 50 Anschluss Kugelhahn mit pneumatischem Schwenkantrieb G1/4 G2 Betriebsdruck Messing: DN15 DN20 = PN30 DN25 = PN16 DN32 DN50 = PN10 Edelstahl: PN63 Gehäusewerkstoff Armatur: Edelstahl
MehrFLY Klemmverbindungen FLY Clamp pipe connections
FLY Klemmverbindungen FLY Clamp pipe connections Dichtring Gasket Klammer Clamping ring FLY Flansch FLY Flange FLY Flansch FLY Flange Einsatzgebiete Die von LINNEMANN entwickelten FLY Klemmverbindungen
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
zwangsgesteuert force pilot operated Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Nennweite DN
MehrMaryland Metrics: Technical Data Chart web:
DIN 2573 Presion nominal 6 Rated pressure 6 Nenndruck 6 Norma de montaje Forma A : cara de junta sin exigencias Forma B: cara de junta con Rz=160 Standars of mounting Shape A : joint face without requirement.
MehrDGR CE SICHERHEITSVENTILE PED CE SAFETY VALVES
DGR CE SICHERHEITSVENTILE PED CE SAFETY VALVES Ecksicherheitsventile aus Rotguss mit Nirofeder Typ 606 GF/GFL/tGF für neutrale Flüssigkeiten,Dampf und gasförmige Medien Safety valves made of red brass
MehrCERTIFICATE. The Notified Body of TÜV SÜD Industrie Service GmbH. certifies that
CERTIFICATE The Notified Body - 0036 - of TÜV SÜD Industrie Service GmbH certifies that FEAT INDUSTRIALE S.p.A. Via G. Parini, 30 I-23861 Cesana Brianza (LC) has implemented, operates and maintains a Quality
MehrFlieSSbett FB Fluidizing bed FB
FlieSSbett FB Produktinformation Product information Einsatzgebiete Pneumatisches Auflockerungssystem zur Austragung schwer fließfähiger aber gut fluidisierbarer Schüttgüter (mehlartig und pulverförmig),
Mehrdirektgesteuert direct acting
1 direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Kolbenventil Nennweite
MehrPos. Item. DN L H H 1 D d 1 d 2 b n x d 3 d 4
Class 150 Class 150 Ausführung Schieber mit aussenliegender Spindel mit elastischem Keil und steigender Spindel mit Flanschanschluss Baulänge nach ANSI B16.10 DN 2 12 Design Gate valve with outside screw
MehrFSKH-Schmiedestahl Flanschkugelhähne Flanged ball valves forged-type
FSKH-Schmiedestahl Flanschkugelhähne Flanged ball valves forged-type FSKH mit Abschließvorrichtung und Endschalter FSKH with locking device and position switch (F)SKH SAE (F)SKH SAE Größen: 13 bis 50 Gehäuse:
MehrDokumentation. Schnellentlüftungsventile - Typ SE..., SV..., SE... ESG, SE... K ES -
Dokumentation - Typ SE..., SV..., SE... ESG, SE... K ES - Stand: 03/2014 Dokumentation 1. Inhalt 1. Inhaltsverzeichnis....................................................................................................
MehrLebensmittelfühler Food probes
Lebensmittelfühler werden u.a. in Brauereien, Molkereien, Keltereien und Käsereien sowie in der Biotechnologie und Pharmazie eingesetzt. Um den speziellen Bedürfnissen der Lebensmittel-, Getränke- und
MehrWellschlauch mit einer Umflechtung Corrugated hose with one braiding
MW 8 00 TUBOFEX EdelstahlWellschlauch, Parallelwellung Einwandig, mittelwandig, mittlere Wellung TUBOFEX stainless steel hose, parallel corrugations Singlewall, medium wall thickness, standard pitch Ausführung
MehrAttenuator and Distribution System Zehnder ComfoWell 220
Benefits All air treatment functions available: attenuator, fine filter, active carbon filter, manifold box Modular design Compact dimensions Easy to clean Components connected with sliding profiles for
MehrCERTIFICATE. The Certification Body of TÜV SÜD Industrie Service GmbH. certifies that
CERTIFICATE The Certification Body - 0036 - of TÜV SÜD Industrie Service GmbH certifies that North American Stainless 6870 Highway 42 East Ghent, KY 41045-9615 USA has implemented, operates and maintains
MehrInhaltsverzeichnis Index
Sicherheits- / Entlastungsventile, für Lebensmittel - Pharmazie Safety- / Relief-Valves, Food - pharmacy 5 Inhaltsverzeichnis Index Ventil Valve Typ 44 Verwendung Use Entlastungsventil, federbel. Lebensmittel
MehrVerzeichnis / Index. Type: KDG DN: (4 80 ) PN: 6 25 (Class ) Temp: -20 C +150 C
Flansch Absperrklappen / Flanged Butterfly Valves Verzeichnis / Index Zweifach exzentrische Flansch Absperrklappen nach DIN / ISO / EN / ANSI Double offset flange Butterfly Valve acc. to DIN / ISO / EN
MehrZU Endlagenschalter, elektrisch für WA 131 / 131 H Limit Switch, Electrical, for WA 131 / 131 H.
ZU 0859 Endlagenschalter, elektrisch für WA 131 / 131 H Limit Switch, Electrical, for WA 131 / 131 H www.knick.de Bauart und Funktion Der Endlagenschalter ZU 0859 wandelt die pneumatischen Endlagen signale,
MehrEinsitzventile SVP M2000. Single Seat Valves SVP M2000. Ventiltechnik für jeden Einsatzbereich. Valve Technology for Every Application Area 2.
Einsitzventile SVP M2000 Ventiltechnik für jeden Einsatzbereich Inhalt.0 Allgemeine Informationen und technische Daten.1 Eck-, Doppeleck- und Kreuzventile.2 Entnahme- und Durchgangsventile.3 Schrägsitz-
MehrASME Flansche 2014 rff Stark verbunden. Flanges B 16.5 / B Serie A/B B.S / B 16.36
ASME Flansche 2014 rff Stark verbunden. Flansche Flanges B 16.5 / B 16.47 Serie A/B B.S. 3293 / B 16.36 ASME 2 rff.de rff Stark verbunden. Inhalt Content Über rff About rff Expertise in ASME Expertise
MehrLebensmittelfühler Food probes
Lebensmittelfühler werden u.a. in Brauereien, Molkereien, Keltereien und Käsereien sowie in der Biotechnologie und Pharmazie eingesetzt. Um den speziellen Bedürfnissen der Lebensmittel-, Getränke- und
MehrZubehör. Accessories. Dichtring STERI-Connect 73 gasket. Dichtring DIN A (DIN 11853) 75 gasket. Sechskantschraubensatz 77 hexagonal screw set
Zubehör Accessories Seite page Dichtring STERI-Connect 73 gasket Dichtring DIN 11864-A (DIN 11853) 75 gasket Sechskantschraubensatz 77 hexagonal screw set Clampklammer 78 heavy duty clamp 72 Dichtring
Mehr01 Kleinventile DN6 bis 12 als Service-, Entleerungs- und Manometerventile Small Valves DN6 to 12 as Service-, Purge- and Pressure Gauge Valves
01 Kleinventile DN6 bis 12 als Service-, Entleerungs- und Manometerventile Small Valves DN6 to 12 as Service-, Purge- and Pressure Gauge Valves DN Eck Angle Durchgang Globe Material 1 Typ type Seite page
MehrMessanordnungen mit Messumformer SITRANS P Measurement with transmitter SITRANS P
Messanordnungen mit Messumformer SITRANS P Measurement with transmitter SITRANS P Beispiele Examples Behälter/vessel Nummer Art der Messung offen geschl. Messumformertyp Medium number kind of measurement
Mehr07 Ventile valves. 7. Ventile valves. 7.1 Ecküberströmventil 7.2 Bodensitzventil 7.3 Tellerrückschlagventil 7.4 Probenahmeventil
07 Ventile valves 7. Ventile valves 7.1 Ecküberströmventil 7.2 Bodensitzventil 7.3 Tellerrückschlagventil 7.4 Probenahmeventil overflow valve bottom seat valve non return disk valve sampling valve 7.5
MehrMantelthermoelemente. Mineral Insulated Thermocouples. Technische Daten Technical Data. Beschreibung Description
Thermocouples NiCr-Ni, Typ K NiCr-Ni, Type K eschreibung Typ K mit freien Enden isoliert verschweißt Thermocouples Type K with open ends IEC 584-200 +1100 C 50 1,0 K-O363 0050-10 10,00 1,5 K-O363 0050-15
MehrTieftemperaturventil cryogenic valve. Cryaxx. leading valve technology TM
Tieftemperaturventil cryogenic valve Cryaxx leading valve technology TM müller co-ax ag - das Unternehmen müller co-ax ag - the company müller co-ax ag leading valve technology Wenn es um die Steuerung,
MehrMade in W-Germany. kv=0,12 l/min (NW 0,5) P2[bar] kv=0,45 l/min (DN 1) P2[bar] kv=0,70 l/min (NW 1,5) P2[bar]
NW 0,//, /- und /-Wege Sitzventile 0.//. mm Orifice /- and /-Way Poppet Valves Als Standard sind die Ventile in vielfältigen Ausführungen lieferbar z. B.: drei unterschiedliche Sockelformen (Standard-,
MehrMikro-Magnetventile Typ 65 NW 0,5/1/1,6/2 2/2- und 3/2-Wege Sitzventile Direktgesteuert
NW 0,//,6/ /- und /-Wege Sitzventile 0.//.6/ mm Orifice /- and /-Way Poppet Valves Als Standard sind die Ventile in vielfältigen Ausführungen lieferbar, z.b. drei unterschiedliche Sockelformen (Standard-,
MehrStandardteile Schraubenkopf- dichtung Bonded Seals
Standardteile Schraubenkopf- dichtung Bonded Seals Bonded Seals werden als Standardelemente zur Abdichtung von Schraubenverbindungen mit planen Oberflächen verwendet. Sie bestehen aus einer Unterlegscheibe
MehrSSO. angle type. Eckform. Anwendung: Application: Pos. Teil / part Material 11.0
11.011.6.cdr Schnellschlußventil SSO quickclosing valve TS [ C] PS [bar] PS [bar] 60 18,7 30 10 25 40 + 50 25 40 + 0 25 40 ckform angle type Anwendung: inbau in Ölablaßleitungen ( Ölablaßventil ) an besonders
MehrThe Professionals of Irrigation Die Spezialisten für Beregnung
The Professionals of Irrigation Die Spezialisten für Beregnung The Original PERROT Coupling Die Original PERROT-Kupplung Nothing is as flexible as the original Nichts ist so flexibel wie das Original
MehrPneumatische Quetschventile Air operated Pinch Valves Anschlussmöglichkeiten / Connection options:
Pneumatische Quetschventile Air operated Pinch Valves Anschlussmöglichkeiten / Connection options: Flanschanschluss / Flange Connection Innengewindeanschluss / Internal Thread Connection Klemmstutzenanschluss
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
direktgesteuert direct acting Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Nennweite DN 1,7 Druckbereich Gehäusewerkstoff Dichtwerkstoff Sitzventil mit Handnotbetätigung
MehrGate Valve Absperrschieber
Gate Valve Absperrschieber Cast steel Stahlguß Type GA 100 PN 16 100 DN 50 600 11 14 15 23 13 20 18 22 6 12 16 19 21 2 24.1, 24.2 4 5 7 10 8 9 1 Created / Erstellt Checked / Geprüft Quotation / Angebot
Mehr0,5 max. 16bar (see table) body material brass, AISI 303, AISI 316
servogesteuert pilot operated Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Nennweite DN 13 50
MehrFlexibel, schnell und preiswert durch eigene Konstruktion, Modellbau und Gießerei
Armaturen für Industrie und Schiffbau Valves and fittings for industry and shipbuilding Stand 09/2007 Flexibel, schnell und preiswert durch eigene Konstruktion, Modellbau und Gießerei Flexible, fast and
MehrTieftemperaturventil cryogenic valve Cryaxx. leading valve technology TM
1 Tieftemperaturventil cryogenic valve Cryaxx leading valve technology TM müller co-ax ag - das Unternehmen müller co-ax ag - the company müller co-ax ag leading valve technology Wenn es um die Steuerung,
Mehrwatergates knife-gate-valves - Stoffschieber
watergates knife-gate-valves - Stoffschieber Technische Daten BAUFORM Keilflachschieber mit Innenspindel, DIN 3352/4A, weichdichtend, wartungsfrei. Für den Einsatz im Nutz- und Abwasserbereich. VORTEILE
MehrZWISCHENFLANSCHKLAPPEN BUTTERFLY VALVES
ZWISCHENFLANSCHKLAPPEN S DKZ 103 Pos. Item. q Gehäuse w Klappenscheibe e Manschette r Welle t Sicherungsring y O-Ringe u Zwischenflansch / Laterne i Zapfen o Dichtring oa O-Ring a Verschlussschraube aa
MehrTechnische Dokumentation Technical Documentation
Technische Dokumentation Technical Documentation XOMOX Fully Lined Check Valves Dok. Nr.: tdb_check_gb XOMOX International GmbH & Co. OHG Von-Behring-Straße 15 D-88131 Lindau / Deutschland Januar 2008
MehrKipp-Rückschlagklappen Typ BCV 1 Swing check valves type BCV 1 PN 10 / 16, DN Class 75 / 150, Size 12"... 40"
WASSERARMATUREN Valves for drinking and sewage water Kipp-Rückschlagklappen Typ BCV 1 Swing check valves type BCV 1 PN 10 / 16, DN 00... 1000 Class 75 / 150, Size 12"... 40" Kipp-Rückschlagklappen Typ
MehrZehnder ComfoWell 220
Benefits All air treatment functions available: attenuator, fine filter, active carbon filter, manifold box Modular design Compact dimensions Easy to clean Components connected with sliding profiles for
MehrDurchblasschleuse D, Bauserie ii Blowthrough rotary feeder D,
Durchblasschleuse D, Bauserie ii Blowthrough rotary feeder D, series II Produktinformation Product information Einsatzgebiete Die Durchblasschleuse D, Bauserie II wird zur Produkteinspeisung in pneumatische
MehrZehnder ComfoWell 320
Benefits All air treatment functions available: attenuator, fine filter, active carbon filter, manifold box Modular design Compact dimensions Easy to clean Components connected with locking slides for
MehrTechnik conversion. information. Deutsch English
Technik conversion information Deutsch English SORTIEREINHEITEN sorting units Sortierung von Ring-pull Verschlüssen Sorting of ring-pull closures xxxxxxxxxxxxxxx Sortiereinheiten bestehen aus dem Hopper
MehrBROEN BALLOMAX PN40, DN 15-50
Dealing with forces of nature BROEN BALLOMAX PN40, DN 15-50 Auf Wunsch auch mit Knebelgriff. Available with T-handle upon request. Beidseitig Flansche Vollverschweißter Stahlkugelhahn Materialbeschreibung
MehrKuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogs or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
MehrTelefon: +49 (0) 5251 / Telefax: +49 (0) 5251 /
1 / 9 Assembly: Assembly plate: The left and right assembly plates are screwed onto the side of the vehicle frame via the designated bore holes. The following items shall be used per side for this purpose:
MehrASME Rohrformteile 2014 rff Stark verbunden. Rohrformteile Buttweld Fittings B 16.9
ASME Rohrformteile 2014 rff Stark verbunden. Rohrformteile Buttweld Fittings B 16.9 ASME 2 rff.de rff Stark verbunden. Inhalt Content Über rff About rff Expertise in ASME Expertise in ASME 4 / 5 Lieferprogramm
MehrArmaturen GmbH Armaturen, Rohre, Sonderteile aus Edelstahl fittings, pipes, special parts of stainless steel l
Armaturen, Rohre, Sonderteile aus Edelstahl fittings, pipes, special parts of stainless steel l Montagezubehör installation accessories fon: + 49 (0) 44 65 8 07 0 fax: + 49 (0) 44 65 8 07 40 7 Montagezubehör
MehrSpecification. DESIGN Swing check valves for return fl ow prevention in piping systems to be mounted directly between fl anges acc. to DIN.
Technische Daten BAUFORM Rückschlagklappen zur Rückfl ussverhinderung in Rohrleitungssystemen für den Einbau zwischen DIN Flanschen. ANSCHLUß Flansch DN32 DN500 bemessen für Flansch nach PN16 BETRIEBSDRUCK
MehrCompressed air - dewpoint 10K under ambient temperature - ISO8573-1, Kl. 3 Durchflussrichtung Flow direction EIN: von 1-2 AUS: von 2 3
3/2 Wegeventil mit PIEZO-Pilotventil Baureihe P20 3/2 way valve with Piezo-pilot valve Series P20 P20 381RF-* NW 2 Eigenerwärmungsfrei Ein Produkt für alle Ex-Bereiche Kompatibel zu Microcontrollern Kompatibel
Mehr2/2-Wege Kunststoff-Magnetventil 2/2-way plastic solenoid valve. Baureihe 111 Type 111. direktgesteuert mit Trennmembrane flüssigkeitsgedämpft
direktgesteuert mit Trennmembrane flüssigkeitsgedämpft direct acting with isolating diaphragm fluid-damped Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Bauart Nennweite
MehrHoneywell AG Hardhofweg. D-74821 Mosbach MU1H-1220GE23 R1001
BA 95 Einbau-Anleitung Installation Instructions Einbau Installation Einbaubeispiel Installation example Ablaufleitung vorsehen Install discharge pipework Durchflussrichtung beachten! Consider direction
Mehrservogesteuert pilot operated
1 servogesteuert pilot operated Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: NO (stromlos offen) function B: NO (normally open) Bauart Sitzventil mit Membrandichtung
MehrÜBERSTRÖMVENTILE OVERFLOW VALVES. Type 618 T / Type 619 E for liquids, steam and gaseous media
ÜBERSTRÖMVENTILE UND REGELVENTILE OVERFLOW VALVES AND CONTROL VALVES Überström-/Regelventile aus Rotguss mit Nirofeder Overflow/control valves made of red brass with stainless steel spring Typ 618 T /
Mehr2/2-Wege Kunststoff-Magnetventil 2/2-way plastic solenoid valve. Baureihe 148 Type 148
direktgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Bauart Nennweite DN 2,0 8,0 Druckbereich Gehäusewerkstoff
MehrAttenuator and Distribution System Zehnder ComfoWell 320
Attenuator and Distribution System Zehnder ComfoWell 32 Benefits All air treatment functions available: attenuator, fine filter, active carbon filter, manifold box Modular design Compact dimensions Easy
MehrType PG, SG & RSG - Graphite Bearings Maintenance free for High Temperatures, Bellows System Cartridge Series 9000G
Type PG, SG & RSG - Graphite Bearings Maintenance free for High Temperatures, Bellows System Cartridge Series 9000G Recommended medium Heat transfer oil, Steam, Water, Air, Nontoxic gases, vacuum Available
Mehrdiameter DN 2,0 6,0 0 max. 48bar (see table) body material brass, AISI 303, AISI 316
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Sitzventil Nennweite
Mehr2/2-Wege Coaxialventil 2/2-way coaxial valve. Baureihe 270 / 271 / 272 Type 270 / 271 / 272. direktgesteuert direct acting. Nennweite DN 10 50
direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Nennweite DN 10 50 Druckbereich
MehrAbsperrklappen Typ BD und BW Butterfly valves type BD and BW PN 2, , DN , Class , Size 2" "
WASSERARMATUREN Valves for drinking and sewage water Absperrklappen Typ BD und BW Butterfly valves type BD and BW PN,..., DN 0... 00, Class... 0, Size "... 0" Absperrklappen Typ BD und BW Butterfly valves
MehrSchüco ASS 50. Schiebe- und Hebe-Schiebesysteme Sliding and lift-and-slide systems. Schüco 83
Schiebe- und Hebe-Schiebesysteme Sliding and lift-and-slide systems Schüco 83 Schüco ASS 50 Das gedämmte Schiebe- und Hebe-Schiebesystem überzeugt durch solide Flügelrahmen mit geringer Ansichtsbreite
Mehr2/2-Wege Kunststoff-Magnetventil 2/2-way plastic solenoid valve. Baureihe 135 Type 135
zwangsgesteuert, flüssigkeitsgedämpft force pilot operated, fluid-damped Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Bauart Nennweite DN 15 50 Druckbereich Gehäusewerkstoff
Mehrdiamant/cbn industrie
YPE 37 - Sägedrähte Sawing wires L 1 L 1 () () () () () () 130 65 0,4 130 65 1,1 130 65 0,5 130 65 1,3 130 65 0,6 130 65 1,5 130 65 0,7 130 65 1,7 130 65 0,8 130 65 2,0 130 65 0,9 130 65 2,5 130 65 1,0
MehrGLASS LINING TECHNOLOGIES. Armaturen. Valves
Armaturen Valves Armaturen Valves Bezeichnung Blatt Kugelhahn VHK 1 Membranventil VM 2 Schrägsitzventil VSK 3 Schrägsitzventil mit Faltenbalg VSF 4 Schauglas SG 5 Kompaktschauglas (runde Schauglasarmatur
MehrTechnische Änderungen vorbehalten / modifications reserved Stand / stand: 11/2011
direktgesteuert mit PTFE-Faltenbalg direct acting with PTFE-bellow Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally
MehrAKO ARMATUREN & SEPARATIONSTECHNIK GMBH
AKO ARMATUREN & SEPARATIONSTECHNIK GMBH Quetschventile haben sich als universelle Problemlöser zum Absperren abrasiver, feststoffbeladener Medien bewährt. AKO ARMATUREN & SEPARATIONSTECHNIK GMBH QUETSCHVENTILE
MehrMechanische Schlauchquetschventile Serie OV Mechanical Pinch Valves of OV Series
Serie OV of OV Series Mit Sicherheit geregelt Safety regulated Mechanische Schlauchquetschventile: Armaturenlösung zum Absperren und Regeln Selbst größere Feststoffpartikel werden von der besonders verschleißfesten
MehrAustragschleuse A1/AG11, Bauserie II. series II. Produktinformation Product information. Applications.
Austragschleuse A1/AG11, Bauserie II Discharge rotary feeder A1/AG11, series II Produktinformation Product information Einsatzgebiete Die wird zur Produkteinspeisung und -ausspeisung in pneumatische Saug-
Mehr2/2-way solenoid valve - Type 218
- direktgesteuert direct acting Schaltfunktion A: function A: NC (stromlos geschlossen) NC (normally closed) Schaltfunktion B: function B: NO (stromlos offen) NO (normally open) Bauart Sitzventil Nennweite
Mehra new line of steam sterilizers
a new line of steam sterilizers ticheeasy to use and high consumption savings multifunction display controlled by micro-processor double and patented motor-operated closure stainless steel chamber without
MehrONE BY ONE Steve Lechot, 2004
Steve Lechot, 2004 Energiesparend Material praktisch reissfest, schwer entflammbar und alterungsbeständig Details siehe Seite 148 Energy-saving Material flame-resistant, durable and virtually tear-free
Mehr