MANUAL ECHO SOUNDER S-120
|
|
|
- Dieter Holst
- vor 7 Jahren
- Abrufe
Transkript
1 MANUAL ECHO SOUNDER S-0 October 0 Rev: 07 All information, pictures, drawings and technical schematics are the property of Radio Zeeland DMP. Unauthorized copying is prohibited. The content of this manual is subject to change without prior notice.
2 VERSION DATE AUTHOR DESCRIPTION BdK Sigma 0 connections added SIGMA0 need software version 9 or higher S-0 need software version 3 or higher PdS Dipswitch settings are changed The mutual distance for several transducers was added BdK Dipswitch settings changed BdK Drawings changed CsP Drawings added, dipswitch settings changed 0m range added TdK Page 3, drawing updated TdK Address DIP switches 5 and 6 setting changed Supply scope removed transducer and RZ38 Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page of 47
3 EC DECLARATION OF CONFORMITY We, RADIO ZEELAND DMP B.V. Industrieweg 7, 4538 AG Terneuzen NL P.O. Box 070, 4530 GB Terneuzen NL declare under our sole responsibility that the product, S - 0 to which this declaration relates. Is in conformity with the following standard(s) or other normative document(s). EN (IEC 945 Third edition: 996-) Chapters 9, 0, and. This declaration is issued according to the European Community Directive on Electromagnetic Compatibility (89/336/EEC). On behalf of Radio Zeeland DMP B.V. Terneuzen, the Netherlands Technical Manager Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page 3 of 47
4 INDEX Nederlands Algemene beschrijving & technische gegevens Leveringsomvang Beschrijving van benodigde items Manual Installatie voorschrift Montage interfacebox Montage transducer Aansluitingen Instellingen... 0 English.... General information & technical data Scope of delivery Description required items Manual... 3 Interface box S-0 or MODIFIED S Installation instructions Mounting instruction Installation transducer Connections Settings... 6 Deutsch Allgemeine Beschreibung & Technische Daten Lieferumfang Beschreibung des benötigte Zubehörs Handbuch Interface box S-0 oder MODIFIED S Transducer Installationsvorschrift Montage Montage Transducer Anschlüsse Einstellungen... Appendix... 4 A. Dimension Interface box S B. Dimension Transducer... 6 C. Connection diagram to Falcon D D. Connection diagram to MultiHUB... 8 E. Connection diagram stand alone... 9 F. Connection Sigma 0 to one S G. Connection Sigma 0 to two S H. Internal connection Sigma 0 to one S I. Internal connection Sigma 0 to two S J. Print lay-out P58/A K. Connection standalone modified S L. Connection Sigma 0 to modified S M. Connection Sigma 0 to modified x S Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page 4 of 47
5 N. Connection D-000 to modified S O. Connection Falcon system to x modified S P. Replacing RZ 35 by S Replacing x S-0, option Replacing x S-0, option... 4 Replacing x S-0, option Replacing x S-0, option Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page 5 of 47
6 Nederlands Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page 6 of 47
7 . Algemene beschrijving & technische gegevens.. Leveringsomvang In de verpakking treft u de volgende zaken aan: Standaard levering: - Manual - Interfacebox S-0 Aangepaste levering: - Manual - Interfacebox S-0 MODIFIED Controleer of de bovengenoemde items allemaal aanwezig zijn. Wanneer een van deze items ontbreekt adviseren wij u direct contact op te nemen met uw verkooppunt. Lees voor het installeren van de S-0 deze manual aandachtig door. Tevens adviseren wij u ook de manuals van de aangesloten apparatuur aandachtig door te lezen... Beschrijving van benodigde items... Manual Hierin zijn de functionaliteit van de S-0 en de aansluitingen beschreven.... Interfacebox S-0 of S-0 MODIFIED - Voedingsspanning: 8-36V DC. - Stroomopname: minder dan A. - Meetbereik van 0,3m tot 40m. MODIFIED S-0 is voor situaties waarbij de RZ 35 rechtstreeks kan worden vervangen door een S-0 (zie Appendix P). Minimaal meetbereik gemeten in een glazen testkolom, ø60 cm, met een vlakke bodem en vrij hangende transducer. In standaard water bij 0 C met sg kg/m³...3. Transducer Deze sensor is het werkelijke opname element. Door middel van trillingen met een frequentie van 00kHz. Aan deze transducer zit een coaxiale kabel van 4,5m. Deze mag niet ingekort of verlengd worden. Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page 7 of 47
8 . Installatie voorschrift.. Montage interfacebox De interface box dient u te plaatsen op een locatie welke eenvoudig toegankelijk is voor service doeleinden. U dient de voeding aan te sluiten op de daarvoor bestemde klemmen en deze af te zekeren met een zekering van 6A... Montage transducer De transducer dient te worden geplaatst in de bodem van het schip, door gebruik te maken van een inbouwhuis. Dit inbouwhuis bevat schroefdraad, zodanig dat de transducer via de onderzijde van het schip kan worden gemonteerd. Tussen de transducer en het inbouwhuis dient u een rubberen ring te plaatsen ter afdichting van het geheel. Over de coaxiale kabel schuift u de moer welke de transducer bevestigt aan het inbouwhuis. U dient ervoor te zorgen dat de onderzijde van de transducer parallel met de scheepshuid is. Vervolgens dient u de ruimte tussen de transducer en het inbouwhuis op te vullen met een waterbestendige vulmassa. Tevens moet de naad tussen het inbouwhuis en de scheepshuid vlak worden afgewerkt. Controleer goed of er geen vulmassa aan de onderzijde van de transducer komt. Dit zal een juiste werking van de dieptemeting verstoren. Eveneens is verven ongewenst. Het wordt aangeraden de transducer dusdanig te positioneren dat er zich geen obstakels, zoals las- of klinknagelranden, boegschroeven of afvoerpijpen in de vaarrichting aanwezig zijn. Deze produceren wervelingen in het water die de juiste werking van de dieptemeting kunnen verstoren. Indien de transducer uitsteekt ten opzichte van de scheepshuid, dient men er voor te zorgen dat er een vloeiende aanloop tot aan de onderzijde van de transducer wordt gecreëerd. Daarnaast is het zaak dat er direct onder de transducer geen luchtbellen kunnen vormen. De transducer mag dus niet worden geplaatst op een locatie waar de scheepshuid een holte vormt. Als er meerdere tranducers worden gebruikt, mogen deze niet dichter dan meter van elkaar worden gemonteerd. Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page 8 of 47
9 3. Aansluitingen 3.. Elektrische aansluitingen S-0 K: Voeding Op deze connector wordt de voedingsspanning van 8-36V DC aangesloten. Deze is intern tegen ompolen en overspanning beveiligd. De interface dient via de wartel te worden geaard, zoals aangegeven in onderstaande afbeelding. Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page 9 of 47
10 K6: NMEA Met behulp van deze connector kunt u de NMEA uitgang en ingang aansluiten. De uitgang geeft de NMEA signalen door naar het zichtinstrument of netwerk. Middels de NMEA ingang worden commando s aan de interfacebox gegeven om het meetbereik te wijzigen. De NMEA ingang en uitgang zijn galvanisch gescheiden van de verdere elektronica. 3.. Instellingen Wanneer er meerdere interfaceboxen in het netwerk aanwezig zijn dient u per interfacebox een uniek adres in te geven. Dit doet u met DIP switch SW3, hier kunt u kiezen tussen adres 0 en 3. Overzicht DIP switch SW3 instellingen Bij één of eerste interface: SW Position Description OFF Startup range set to: ON = 4m, OFF = 40m OFF Dynamic Air Bubble suppression ON/OFF 3 OFF No function 4 OFF No function 5 OFF JB Address selector 6 OFF JB Address selector 7 OFF No function 8 OFF Reserved Tweede interfacebox: SW Position Description OFF Startup range set to: ON = 4m, OFF = 40m OFF Dynamic Air Bubble suppression ON/OFF 3 OFF No function 4 OFF No function 5 ON JB Address selector 6 OFF JB Address selector 7 OFF No function 8 OFF Reserved Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page 0 of 47
11 Derde interfacebox: SW Position Description OFF Startup range set to: ON = 4m, OFF = 40m OFF Dynamic Air Bubble suppression ON/OFF 3 OFF No function 4 OFF No function 5 OFF JB Address selector 6 ON JB Address selector 7 OFF No function 8 OFF Reserved Vierde interfacebox: SW Position Description OFF Startup range set to: ON = 4m, OFF = 40m OFF Dynamic Air Bubble suppression ON/OFF 3 OFF No function 4 OFF No function 5 ON JB Address selector 6 ON JB Address selector 7 OFF No function 8 OFF Reserved Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page of 47
12 English Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page of 47
13 . General information & technical data.. Scope of delivery The packing of the equipment contains the following items: Standard scope of delivery: - Manual - Interfacebox S-0 Modified scope of delivery: - Manual - Interfacebox S-0 MODIFIED Make sure all of the above items are present. In case of an incomplete delivery, please contact your dealer as soon as possible. Before installing the S-0 we advise you read this instruction manual carefully as well as all other manuals that came with the additional equipment connected to this sensor... Description required items... Manual This manual will instruct you how to connect and install the S-0 echo sounder. Interface box S-0 or MODIFIED S-0 - Supply voltage: 8-36V DC. - Current consumption: less than A. - The measuring range is 0,3m - 40m., MODIFIED S-0 is for situations where the RZ 35 can be directly replaced by a S-0 (refer to Appendix P)., the minimum range measured in a Ø60cm glass test column with a flat bottom and a free transducer in standard water of 0 c with gw of kg/m³.... Transducer This sensor measures the depth using a sound frequency of 00 khz. A 4.5 meter coaxial cable is connected to the transducer, which should not be shortened or extended. Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page 3 of 47
14 . Installation instructions.. Mounting instruction The interface box should be placed in a location easily accessible for service purposes and within easy reach for the cables. The interface box requires a 4 Volt power supply which should be externally fused (6A)... Installation transducer The transducer is placed in the flat portion of the ship using a mounting housing. This housing needs to be screw-threaded, enabling the transducer to be installed from the bottom of the ship. A rubber gasket ring is placed between the transducer and the housing. The unit is fixed in place with a nut pushed over the coaxial cable. Make sure the bottom of the transducer is in line with the ship s hull. The space between the transducer and the housing is filled up with a waterresistant filling paste. The joint between the housing and the ship s shell is smoothened with this filling paste. Ensure that the filling paste does not find its way to the bottom of the transducer. It is recommended that the transducer is not painted. There should be no obstacles such as welding seams, rivet joints, locking screws or drain pipes in the traveling direction. These produce eddies that prevent the depth meter from functioning properly. If for some reason the transducer protrudes beyond the ship shell, a uniform elevation up to the bottom of the transducer is made. It is also important that air bubbles are not formed directly under the transducer. The transducer should not be placed in the vicinity of cavities in the ship s shell, which could also disturb the proper working of the transducer. When more than one transducer is used the distance between the transducers should be at least meter. Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page 4 of 47
15 3. Connections 3.. Electrical connections S-0 K: Power supply The 4 VDC ( VDC) is connected here. The power is protected against reverse polarity and overvoltage. The grounding through the swivel should be accomplished as shown in the drawing below. Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page 5 of 47
16 K6: NMEA Here the NMEA input and output are connected. The NMEA input is used to send commands to the interface box. If the S-0 is connected on a Falcon system, the NMEA input can be connected to a Falcon display unit or a NMEA output of a MultiHUB. The NMEA input and output are galvanic separated from the rest of the electronics. If multiple interface boxes in a Falcon system are used, each interface box needs a unique address. With dipswitch SW3 you can choose between address 0 and Settings When there are multiple interface boxes present in a configuration please make sure you will set a different address to each one of them. This is done by DIP switch SW3, this switch allows you to choose between addresses 0 and 3. Overview DIP switch SW3 settings At one or first interface: SW Position Description OFF Startup range set to: ON = 4m, OFF = 40m OFF Dynamic Air Bubble suppression ON/OFF 3 OFF No function 4 OFF No function 5 OFF JB Address selector 6 OFF JB Address selector 7 OFF No function 8 OFF Reserved Second interface: SW Position Description OFF Startup range set to: ON = 4m, OFF = 40m OFF Dynamic Air Bubble suppression ON/OFF 3 OFF No function 4 OFF No function 5 ON JB Address selector 6 OFF JB Address selector 7 OFF No function 8 OFF Reserved Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page 6 of 47
17 Thirth interface SW Position Description OFF Startup range set to: ON = 4m, OFF = 40m OFF Dynamic Air Bubble suppression ON/OFF 3 OFF No function 4 OFF No function 5 OFF JB Address selector 6 ON JB Address selector 7 OFF No function 8 OFF Reserved Fourth interface SW Position Description OFF Startup range set to: ON = 4m, OFF = 40m OFF Dynamic Air Bubble suppression ON/OFF 3 OFF No function 4 OFF No function 5 ON JB Address selector 6 ON JB Address selector 7 OFF No function 8 OFF Reserved Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page 7 of 47
18 Deutsch Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page 8 of 47
19 . Allgemeine Beschreibung & Technische Daten.. Lieferumfang In der Verpackung finden Sie die folgenden Artikel: Standard Lieferumfang: - Handbuch - Interfacebox S-0 MODIFIED Lieferumfang: - Handbuch - Interfacebox S-0 MODIFIED Stellen Sie sicher, dass alle oben genannten Elemente vorhanden sind. Ist dies nicht der Fall, bitte wenden Sie sich so bald wie möglich an Ihren Händler. Vor der Installation der S-0 lesen Sie sorgfältig dieses Handbuch und die Handbücher der zusätzlichen Ausrüstung im Zusammenhang mit diesem. Wenn es Fragen oder Unklarheiten gibt wenden Sie sich bitte an Ihren Händler... Beschreibung des benötigte Zubehörs... Handbuch Hier finden Sie Anweisungen über das Anschließen, die Funktionsweise und die Bedienung von S Interface box S-0 oder MODIFIED S-0 - Stromversorgung: 8-36V DC - Stromaufnahme: weiniger als A. - Der Bereich der Messung ist 0,3m 40m., modifizierten S-0 ist für Situationen, in denen die RZ 35 direkt von einem S-0 ersetzt werden können (Siehe Appendix P), minimaler Bereich, in einer gläsernen Prüfsäule mit Ø 60cm, mit flachem Boden und freiem Schwinger in standardmäßigem Wasser bei 0 C mit spezifischem Gewicht von 000,0 kg/m³ gemessen...3. Transducer Dieser Sensor ist zu messen von der Tiefe mit Hilfe von Vibrationen mit einer Frequenz von 00 khz. Der Transducer ist mit einem Koaxialkabel mit einer Länge von 4,5 Metern verbunden. Dies kann nicht verkürzt oder verlängert werden. Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page 9 of 47
20 . Installationsvorschrift.. Montage Die Interfacebox sollte an einem Ort platziert werden, leicht zugänglich für Service-Zwecke, und in der Nähe der Kabel. Die Interfacebox sollte mit 4Volt gefüttert werden, muss diese Leistung extern verschmolzen (6A)... Montage Transducer Der Schwinger wird mit Hilfe von einem Montagegehäuse an der Fläche des Schiffes montiert. In diesem Gehäuse befindet sich ein Gewinde, damit der Schwinger über die Unterseite des Schiffes montiert werden kann. Zwischen Schwinger und Gehäuse wird zur Abdichtung ein Gummiring eingesetzt. Die Befestigung erfolgt mit einer Mutter, die über das Koaxialkabel geschoben wird. Sorgen Sie dabei dafür, dass die Unterseite des Schwingers in einer Flucht mit der Schiffshaut liegt. Danach wird der Zwischenraum zwischen Schwinger und Gehäuse mit einer wasserfesten Füllmasse aufgefüllt. Auch die Naht zwischen dem Gehäuse und der Schiffshaut wird mit dieser Füllmasse flach abgedeckt. Achten Sie darauf, dass keine Füllmasse an der Unterseite des Schwingers klebt. Das Streichen des Schwingers ist auch nicht erwünscht. In die Fahrtrichtung blickend dürfen keine Hindernisse, wie z. B. Schweiß- und Nietränder, Bugschraube oder Schmutzwasserrohre, vorhanden sein. Diese erzeugen Wasserwirbel, und das stört die richtige Funktionsweise des Tiefenmessers. Wenn der Schwinger aus bestimmten Gründen in bezug zu der Schiffshaut hervor steht, wird ein fließender Anlauf bis zur Unterseite des Schwingers vorgenommen. Es dürfen sich auch keine Luftblasen direkt unter dem Schwinger bilden. An der Schiffshaut darf es deshalb an der Befestigungsstelle nicht zu einer Bildung von Hohlräumen kommen. Denn dadurch entsteht nämlich auch eine Störung der richtigen Funktionsweise. Als mehrere Schinger nutzt werden soll die Abstand zwischen die Schwinger mindestens meter sein. Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page 0 of 47
21 3. Anschlüsse 3.. Elektrische Anschlüsse S-0 K: Spanungsversorgung Dies sind die 4 VDC ( VDC) Mitglieder. Die Spannungsversorgung ist für Verpolung und Überspannung geschützt. Die Erdung muss durch die Schwenk-als erledigt werden gezeigt in der Zeichnung unten. Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page of 47
22 K6: NMEA Hier werden die NMEA-Eingang und-ausgang angeschlossen. Die NMEA Eingang ist um Befehle vor der Kontrollzone zu Interfacebox zu senden. Wenn die S-0 auf einem Falcon System angeschlossen ist, kann der NMEA-Eingang mit einem Falcon Sichtinstrument oder eines NMEA-Ausgang von einem MultiHUB angeschlossen werden. Die NMEA-Eingang und Ausgang sind galvanisch vom Rest der Elektronik getrennt. 3.. Einstellungen Wenn es mehrere interfaceboxen in der Netzwerk gibt sollen Sie pro Interfacebox eine eindeutige Adresse eingeben. Dies machen Sie mit DIP- Schalter SW3, hier können Sie zwischen Adresse 0 und 3 wählen. Übersicht DIP-Schalter-SW3 Einstellungen In einem oder ersten Interface box: SW Position Description OFF Startup Range ist: ON = 4m, OFF = 40m OFF Dynamic Air Bubble Suppression ON/OFF 3 OFF Kein Funktion 4 OFF Kein Funktion 5 OFF JB Adresse Selektion 6 OFF JB Adresse Selektion 7 OFF Kein Funktion 8 OFF Reserved Zweiten interface: SW Position Description OFF Startup range ist: ON = 4m, OFF = 40m OFF Dynamic Air Bubble suppression ON/OFF 3 OFF Kein funktion 4 OFF Kein funktion 5 ON JB Adres selection 6 OFF JB Adres selection 7 OFF Kein funktion 8 OFF Reserved Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page of 47
23 Interface Drei SW Position Description OFF Startup Range ist: ON = 4m, OFF = 40m OFF Dynamic Air Bubble Suppression ON/OFF 3 OFF Kein Funktion 4 OFF Kein Funktion 5 OFF JB Adresse Selektion 6 ON JB Adresse Selektion 7 OFF Kein Funktion 8 OFF Reserved Interface Vier SW Position Description OFF Startup Range ist: ON = 4m, OFF = 40m OFF Dynamic Air Bubble Suppression ON/OFF 3 OFF Kein Funktion 4 OFF Kein Funktion 5 ON JB Adresse Selektion 6 ON JB Adresse Selektion 7 OFF Kein Funktion 8 OFF Reserved Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page 3 of 47
24 Appendix Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page 4 of 47
25 A. Dimension Interface box S-0 Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page 5 of 47
26 B. Dimension Transducer Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page 6 of 47
27 Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page 7 of 47 x.5mm 4VDC x.5mm 4VDC FALCON D000 x x 0,5mm NMEA-data 4V DC x,5mm COAX C. Connection diagram to Falcon D000 COMMENTS: ALL SIZES IN MM AMERICAN PROJECTION STYLE COPYRIGHT 00 RADIO ZEELAND DMP B.V. Industrieweg AG Terneuzen The Netherlands Tel: Fax: Project: Part: Drawn: Date: august 00 File name: Falcon D000 Cable diagram Size: Page: A4 0 of 0 Revision number: A
28 Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page 8 of 47 x.5mm 4VDC FALCON D000 x x 0,5 Scr NMEA data Ethernet connection CAT5 cable COAX MULTIHUB x x 0,5 Scr NMEA data CAT5 cable FALCON D000 Ethernet connection x,5 Scr x,5 Scr 4V DC 4V DC COAX x.5mm 4VDC NOTE: The distance between two transducers should at least be meter D. Connection diagram to MultiHUB 4V DC x,5 Scr 4V DC x,5 Scr COMMENTS: ALL SIZES IN MM AMERICAN PROJECTION STYLE COPYRIGHT 00 RADIO ZEELAND DMP B.V. Project: Part: Falcon D000 Cable diagram Industrieweg AG Terneuzen The Netherlands Tel: Fax: Drawn: Date: august 00 File name: Size: A4 Page: 0 of 0 Revision number: A
29 Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page 9 of 47 4V DC NMEA-data x,5mm x x 0,5mm COAX cable is part of the sensor and should not be lengthen. E. Connection diagram stand alone COMMENTS: ALL SIZES IN MM AMERICAN PROJECTION STYLE COPYRIGHT 00 RADIO ZEELAND DMP B.V. Industrieweg AG Terneuzen The Netherlands Tel: Fax: Project: Part: Drawn: Date: august 00 S0 Depthsounder sensor box Cable diagram Size: Page: A4 0 of 0 File name: Revision number: A
30 Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page 30 of 47? m x x 0 SIGMA 0 F. Connection Sigma 0 to one S-0 COMMENTS: ALL SIZES IN MM AMERICAN PROJECTION STYLE COPYRIGHT 00 RADIO ZEELAND DMP B.V. Industrieweg AG Terneuzen The Netherlands Tel: Fax: Project: Part: Drawn: Date: august 00 File name: SIGMA 0 Cable diagram Size: Page: A4 0 of 0 Revision number: A
31 Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page 3 of 47? m x x 0 SIGMA 0 NOTE: The distance between two transducers should at least be meter G. Connection Sigma 0 to two S-0 COMMENTS: ALL SIZES IN MM AMERICAN PROJECTION STYLE COPYRIGHT 00 RADIO ZEELAND DMP B.V. Industrieweg AG Terneuzen The Netherlands Tel: Fax: Project: Part: Drawn: Date: august 00 File name: SIGMA 0 Cable diagram Size: Page: A4 0 of 0 Revision number: A
32 H. Internal connection Sigma 0 to one S-0 Project: S0 Base pcb RZ58/Ax SIGMA 0 / S0 CONNECTION DIAGRAM Part: Drawn: Date: B K6-4 K6-3 K6- K6- K- 3 K- K- NMEA OUT (+) NMEA OUT (-) NMEA IN (+) NMEA IN (-) SCREEN GND (MAIN) +4VDC (MAIN) Revision number: 0 of 0 Size: Page: A4 File name: K3-04 K3-03 K3-0 K3-0 K3 Screen Industrieweg AG Terneuzen The Netherlands Tel: Fax: K- K- K-0 K-09 K-08 K-07 NMEA IN (+) NMEA IN (-) NMEA OUT (+) NMEA OUT (-) A_OUT (+) A_OUT (-) OUTPUT FOR ANALOG GAUGE K-06 K-05 K-04 K-03 K-0 K-0 K-05 K-04 K-03 K-0 K-0 K ILL GND Screen GND (BACKUP) +4VDC (BACKUP) SCREEN GND (MAIN) +4VDC (MAIN) DIM OUTPUT ALL SIZES IN MM AMERICAN PROJECTION STYLE COPYRIGHT 00 RADIO ZEELAND DMP B.V. K Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page 3 of 47 COMMENTS:
33 I. Internal connection Sigma 0 to two S-0 SENSOR # SENSOR # S0 Base pcb RZ58/Ax S0 Base pcb RZ58/Ax SIGMA 0 / two sensors S0 CONNECTION DIAGRAM Project: Part: Drawn: Date: B K6-4 K6-3 K6- K6- K- 3 K- K- K6-4 K6-3 K6- K6- K- 3 K- K- NMEA OUT (+) NMEA OUT (-) NMEA IN (+) NMEA IN (-) SCREEN GND (MAIN) +4VDC (MAIN) NMEA OUT (+) NMEA OUT (-) NMEA IN (+) NMEA IN (-) SCREEN GND (MAIN) +4VDC (MAIN) Revision number: 0 of 0 Size: Page: A4 File name: K3-04 K3-03 K3-0 K3-0 K3 Screen Industrieweg AG Terneuzen The Netherlands Tel: Fax: K- K- K-0 K-09 K-08 K-07 NMEA IN (+) NMEA IN (-) NMEA OUT (+) NMEA OUT (-) A_OUT (+) A_OUT (-) OUTPUT FOR ANALOG GAUGE K-06 K-05 K-04 K-03 K-0 K-0 K-05 K-04 K-03 K-0 K-0 K ILL GND Screen GND (BACKUP) +4VDC (BACKUP) SCREEN GND (MAIN) +4VDC (MAIN) DIM OUTPUT ALL SIZES IN MM AMERICAN PROJECTION STYLE COPYRIGHT 00 RADIO ZEELAND DMP B.V. K Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page 33 of 47 COMMENTS:
34 J. Print lay-out P58/A Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page 34 of 47
35 Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page 35 of 47 4V DC NMEA-data x,5mm x x 0,5mm MODIFIED COAX cable (MAX 50 meter) RZ 38 COAX cable is part of the sensor and should not be lengthen. K. Connection standalone modified S-0 COMMENTS: ALL SIZES IN MM AMERICAN PROJECTION STYLE COPYRIGHT 00 RADIO ZEELAND DMP B.V. Project: Part: S0 Depthsounder sensor box Cable diagram MODIFIED S0 Industrieweg AG Terneuzen The Netherlands Tel: Fax: Drawn: Date: august 00 File name: Size: A4 Page: 0 of 0 Revision number: A
36 Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page 36 of 47? m x x 0 SIGMA 0 MODIFIED COAX cable (MAX 50 meter) RZ 38 COAX cable is part of the sensor and should not be lengthen. L. Connection Sigma 0 to modified S-0 COMMENTS: ALL SIZES IN MM AMERICAN PROJECTION STYLE COPYRIGHT 00 RADIO ZEELAND DMP B.V. Industrieweg AG Terneuzen The Netherlands Tel: Fax: Project: Part: Drawn: Date: august 00 File name: SIGMA 0 Cable diagram Size: Page: A4 0 of 0 Revision number: A
37 Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page 37 of 47? m x x 0 SIGMA 0 MODIFIED MODIFIED COAX cable (MAX 50 meter) RZ 38 RZ 38 COAX cable is part of the sensor and should not be lengthen. NOTE: The distance between two transducers should at least be meter COAX cable is part of the sensor and should not be lengthen. M. Connection Sigma 0 to modified x S-0 COMMENTS: ALL SIZES IN MM AMERICAN PROJECTION STYLE COPYRIGHT 00 RADIO ZEELAND DMP B.V. Project: Part: COAX cable (MAX 50 meter) SIGMA 0 Cable diagram Industrieweg AG Terneuzen The Netherlands Tel: Fax: Drawn: Date: august 00 File name: Size: A4 Page: 0 of 0 Revision number: A
38 Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page 38 of 47 x.5mm 4VDC x.5mm 4VDC FALCON D000 x x 0,5mm NMEA-data 4V DC x,5mm MODIFIED COAX cable (MAX 50 meter) RZ 38 COAX cable is part of the sensor and should not be lengthen. N. Connection D-000 to modified S-0 COMMENTS: ALL SIZES IN MM AMERICAN PROJECTION STYLE COPYRIGHT 00 RADIO ZEELAND DMP B.V. Project: Part: Falcon D000 Cable diagram Industrieweg AG Terneuzen The Netherlands Tel: Fax: Drawn: Date: august 00 File name: Size: A4 Page: 0 of 0 Revision number: A
39 Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page 39 of 47 x.5mm 4VDC x x 0,5 Scr FALCON D000 NMEA data 4V DC x,5 Scr MODIFIED Ethernet connection COAX cable (MAX 50 meter) RZ 38 CAT5 cable COAX cable is part of the sensor and should not be lengthen. MULTIHUB x x 0,5 Scr NMEA data CAT5 cable FALCON D000 Ethernet connection x,5 Scr x,5 Scr 4V DC x,5 Scr 4V DC 4V DC MODIFIED COAX cable (MAX 50 meter) x.5mm 4VDC NOTE: The distance between two transducers should at least be meter RZ 38 COAX cable is part of the sensor and should not be lengthen. O. Connection Falcon system to x modified S-0 COMMENTS: ALL SIZES IN MM AMERICAN PROJECTION STYLE COPYRIGHT 00 RADIO ZEELAND DMP B.V. Project: Part: Falcon D000 Cable diagram Industrieweg AG Terneuzen The Netherlands Tel: Fax: Drawn: Date: august 00 File name: Size: A4 Page: 0 of 0 Revision number: A
40 P. Replacing RZ 35 by S-0 Replacing x S-0, option Replacing RZ35 and RZ38 on Sigma0 by S-0 Existing situation New situation 3? 0 m 4 x x 0 SIGMA 0 3? 0 m 4 x x 0 SIGMA 0 K3-04 K3-03 K3-0 K3-0 K- K- K-0 K-09 K-08 K-07 K-06 K-05 K-04 K-03 K-0 K-0 K-05 K-04 K-03 K-0 K-0 K3-04 K3-03 K3-0 K3-0 K- K- K-0 K-09 K-08 K-07 K-06 K-05 K-04 K-03 K-0 K-0 K-05 K-04 K-03 K-0 K-0 NMEA IN (+) NMEA IN (-) NMEA OUT (+) NMEA OUT (-) x,5mm K4-05 RxTx+ K4-04 RxTx- K4-03 K4-0 K4-0 K-03 Scrn K-0 0Vdc K-0 4Vdc RxTx+ RxTx- Wheelhouse 4Vdc Wheelhouse S-0 Base pcb RZ58 K6-04 K6-03 K6-0 K6-0 K-03 K-0 K-0 NMEA OUT (+) NMEA OUT (-) NMEA IN (+) NMEA IN (-) Scrn 0Vdc 4Vdc x,5mm 4Vdc Fore/Aft peak Fore/Aft peak Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page 40 of 47
41 . Switch off breaker(s) of RZ0 system.. Remove cable from K3 on Sigma Pull new sreened cable (xx0.5 mm²) from Sigma 0 K to S-0 K6. 4. Pull new sreened cable (x.5 mm²) from S-0 K to 4V power supply. 5. Connect according figure. 6. Switch on breaker(s). S0 SIGMA 0 POWER SUPPLY K- 4Vdc K- 0Vdc K-3 Scrn. K6- K-9 K6- K-0 K6-3 K- K6-4 K- Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page 4 of 47
42 Replacing x S-0, option Replacing RZ35 on Sigma0 by S-0 option Existing situation New situation MODIFIED 3 3 S-0 Base pcb RZ58?? 4 m 0 4 m 0 K4-05 K4-04 K4-03 K4-0 K4-0 K-03 K-0 K-0 x 0 x x 0 x K6-04 NMEA OUT (+) K6-03 NMEA OUT (-) K6-0 NMEA IN (+) K6-0 NMEA IN (-) K-03 K-0 K-0 SIGMA 0 Scrn 0Vdc 4Vdc SIGMA 0 Scrn 0Vdc 4Vdc K3-04 K3-03 K3-0 K3-0 K- K- K-0 K-09 K-08 K-07 K-06 K-05 K-04 K-03 K-0 K-0 K-05 K-04 K-03 K-0 K-0 K3-04 K3-03 K3-0 K3-0 K- K- K-0 K-09 K-08 K-07 K-06 K-05 K-04 K-03 K-0 K-0 K-05 K-04 K-03 K-0 K-0 x,5mm RxTx+ RxTx- RxTx+ RxTx- x,5mm NMEA IN (+) NMEA IN (-) NMEA OUT (+) NMEA OUT (-) Wheelhouse 4Vdc Wheelhouse 4Vdc Fore/Aft peak Fore/Aft peak Figure Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page 4 of 47
43 . Switch off breaker(s) of RZ0 system.. Remove cable from K3 on Sigma Remove cables from RZ Remove RZ Unsolder transformer from S-0 and replace with L3-L4 from RZ35 or use modified S Install S Pull new sreened cable (xx0.5 mm²) from Sigma 0 K to S-0 K6. 8. Connect according figure. 9. Switch on breaker(s). S0 SIGMA 0 POWER SUPPLY K- 4Vdc K- 0Vdc K-3 Scrn. K6- K-9 K6- K-0 K6-3 K- K6-4 K- Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page 43 of 47
44 3 4 Replacing x S-0, option Replacing RZ35 and RZ38 on Sigma0 by S-0 Existing situation New situation 3? 0 m 4 x x 0 SIGMA 0 3? 0 m 4 x x 0 SIGMA 0 K3-04 K3-03 K3-0 K3-0 K- K- K-0 K-09 K-08 K-07 K-06 K-05 K-04 K-03 K-0 K-0 K-05 K-04 K-03 K-0 K-0 K3-04 K3-03 K3-0 K3-0 K- K- K-0 K-09 K-08 K-07 K-06 K-05 K-04 K-03 K-0 K-0 K-05 K-04 K-03 K-0 K-0 NMEA IN (+) NMEA IN (-) NMEA OUT (+) NMEA OUT (-) x,5mm K4-05 RxTx+ K4-04 RxTx- K4-03 K4-0 K4-0 K-03 Scrn K-0 0Vdc K-0 4Vdc RxTx+ RxTx- Wheelhouse 4Vdc Wheelhouse 4 3 S-0 # Base pcb RZ58 S-0 # Base pcb RZ58 K6-04 K6-03 K6-0 K6-0 K-03 K-0 K-0 K6-04 K6-03 K6-0 K6-0 K-03 K-0 K-0 NMEA OUT (+) NMEA OUT (-) NMEA IN (+) NMEA IN (-) Scrn 0Vdc 4Vdc NMEA OUT (+) NMEA OUT (-) NMEA IN (+) NMEA IN (-) Scrn 0Vdc 4Vdc x,5mm x,5mm 4Vdc 4Vdc xx0,5mm xx0,5mm Fore peak Aft peak Fore peak Aft peak Figure 3 Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page 44 of 47
45 . Switch off breaker(s) of RZ0 system.. Remove cable from K3 on Sigma Pull new sreened cables (xx0.5 mm²) from Sigma 0 K to both S-0 s K6. 4. Pull new sreened cable (x.5 mm²) from both S-0 s K to 4V power supply. 5. Connect according figure Switch on breaker(s). S0# S0# SIGMA 0 POWER SUPPLY K- K- 4Vdc K- K- 0Vdc K-3 K-3 Scrn. K6- K-9 K6- K-0 K6-3 K- K6-4 K- K6-3 K6- K6-4 K6- Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page 45 of 47
46 Replacing x S-0, option Replacing RZ35 and RZ38 on Sigma0 by S-0 option Existing situation New situation 3 3?? 0 m 4 0 m 4 x x 0 x x 0 SIGMA 0 SIGMA 0 K3-04 K3-03 K3-0 K3-0 K- K- K-0 K-09 K-08 K-07 K-06 K-05 K-04 K-03 K-0 K-0 K-05 K-04 K-03 K-0 K-0 K3-04 K3-03 K3-0 K3-0 K- K- K-0 K-09 K-08 K-07 K-06 K-05 K-04 K-03 K-0 K-0 K-05 K-04 K-03 K-0 K-0 NMEA IN (+) NMEA IN (-) NMEA OUT (+) NMEA OUT (-) RxTx+ RxTx- RxTx+ RxTx- S-0 # Base pcb RZ58 MODIFIED S-0 # Base pcb RZ58 MODIFIED K6-04 NMEA OUT (+) K6-03 NMEA OUT (-) K6-0 NMEA IN (+) K6-0 NMEA IN (-) K-03 K-0 K-0 K6-04 K6-03 K6-0 K6-0 K-03 K-0 K-0 K4-05 K4-04 K4-03 K4-0 K4-0 K-03 K-0 K-0 Scrn 0Vdc 4Vdc NMEA OUT (+) NMEA OUT (-) NMEA IN (+) NMEA IN (-) Scrn 0Vdc 4Vdc x,5mm Scrn 0Vdc 4Vdc 4Vdc x,5mm xx0,5mm x,5mm 4Vdc 4Vdc Wheelhouse Wheelhouse Fore peak Aft peak Fore peak Aft peak Figure 4, Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page 46 of 47
47 . Switch off breaker(s) of RZ0 system.. Remove cable from K3 on Sigma Remove cables from RZ Remove RZ Unsolder transformers from S-0 # & # and replace with L3-L4 from RZ35 or use modified S-0 s. 6. Install S-0 s. 7. Pull new sreened cable (x.5 mm²) from S-0 # K to S-0 # K for 4V power supply. 8. Pull new sreened cables (xx0.5 mm²) from Sigma 0 K to both S-0 s K6. 9. Pull new sreened cables (xx0.5 mm²) from Sigma 0 K to both S-0 s K6. 0. Connect according figure 4.. Switch on breaker(s). S0# S0# SIGMA 0 POWER SUPPLY K- K- 4Vdc K- K- 0Vdc K-3 K-3 Scrn. K6- K-9 K6- K-0 K6-3 K- K6-4 K- K6-3 K6- K6-4 K6- Date: October 0, 0 Document: S-0 Rev 07 Date e release: September 3, 00 Page 47 of 47
48 Replacing RZ35 and RZ38 on Sigma0 by S-0 Existing situation New situation 3? 0 m 4 3? 0 m 4 x x 0 SIGMA 0 x x 0 SIGMA 0 K3-04 K3-03 K3-0 K3-0 K- K- K-0 K-09 K-08 K-07 K-06 K-05 K-04 K-03 K-0 K-0 K-05 K-04 K-03 K-0 K-0 K3-04 K3-03 K3-0 K3-0 K- K- K-0 K-09 K-08 K-07 K-06 K-05 K-04 K-03 K-0 K-0 K-05 K-04 K-03 K-0 K-0 NMEA IN (+) NMEA IN (-) NMEA OUT (+) NMEA OUT (-) x,5mm K4-05 RxTx+ K4-04 RxTx- K4-03 K4-0 K4-0 K-03 Scrn K-0 0Vdc K-0 4Vdc RxTx+ RxTx- Wheelhouse 4Vdc Wheelhouse S-0 Base pcb RZ58 K6-04 K6-03 K6-0 K6-0 K-03 K-0 K-0 NMEA OUT (+) NMEA OUT (-) NMEA IN (+) NMEA IN (-) Scrn 0Vdc 4Vdc x,5mm 4Vdc Fore/Aft peak Fore/Aft peak
49
50 Replacing RZ35 on Sigma0 by S-0 option Existing situation New situation 3 3 S-0 Base pcb RZ58 MODIFIED?? 4 m 0 4 m 0 K4-05 K4-04 K4-03 K4-0 K4-0 K-03 K-0 K-0 x 0 x x 0 x K6-04 NMEA OUT (+) K6-03 NMEA OUT (-) K6-0 NMEA IN (+) K6-0 NMEA IN (-) K-03 K-0 K-0 SIGMA 0 Scrn 0Vdc 4Vdc SIGMA 0 Scrn 0Vdc 4Vdc K3-04 K3-03 K3-0 K3-0 K- K- K-0 K-09 K-08 K-07 K-06 K-05 K-04 K-03 K-0 K-0 K-05 K-04 K-03 K-0 K-0 K3-04 K3-03 K3-0 K3-0 K- K- K-0 K-09 K-08 K-07 K-06 K-05 K-04 K-03 K-0 K-0 K-05 K-04 K-03 K-0 K-0 x,5mm RxTx+ RxTx- RxTx+ RxTx- x,5mm NMEA IN (+) NMEA IN (-) NMEA OUT (+) NMEA OUT (-) Wheelhouse 4Vdc Wheelhouse 4Vdc Fore/Aft peak Fore/Aft peak
51
52 Replacing RZ35 and RZ38 on Sigma0 by S-0 Existing situation New situation 3? 0 m 4 3? 0 m 4 x x 0 SIGMA 0 x x 0 SIGMA 0 K3-04 K3-03 K3-0 K3-0 K- K- K-0 K-09 K-08 K-07 K-06 K-05 K-04 K-03 K-0 K-0 K-05 K-04 K-03 K-0 K-0 K3-04 K3-03 K3-0 K3-0 K- K- K-0 K-09 K-08 K-07 K-06 K-05 K-04 K-03 K-0 K-0 K-05 K-04 K-03 K-0 K-0 NMEA IN (+) NMEA IN (-) NMEA OUT (+) NMEA OUT (-) x,5mm K4-05 RxTx+ K4-04 RxTx- K4-03 K4-0 K4-0 K-03 Scrn K-0 0Vdc K-0 4Vdc RxTx+ RxTx- Wheelhouse 4Vdc Wheelhouse S-0 # Base pcb RZ58 S-0 # Base pcb RZ58 K6-04 K6-03 K6-0 K6-0 K-03 K-0 K-0 K6-04 K6-03 K6-0 K6-0 K-03 K-0 K-0 NMEA OUT (+) NMEA OUT (-) NMEA IN (+) NMEA IN (-) Scrn 0Vdc 4Vdc NMEA OUT (+) NMEA OUT (-) NMEA IN (+) NMEA IN (-) Scrn 0Vdc 4Vdc x,5mm x,5mm 4Vdc 4Vdc xx0,5mm xx0,5mm Fore peak Aft peak Fore peak Aft peak
53
54 Replacing RZ35 and RZ38 on Sigma0 by S-0 option Existing situation New situation 3 3?? 0 m 4 0 m 4 x x 0 x x 0 SIGMA 0 SIGMA 0 K3-04 K3-03 K3-0 K3-0 K- K- K-0 K-09 K-08 K-07 K-06 K-05 K-04 K-03 K-0 K-0 K-05 K-04 K-03 K-0 K-0 K3-04 K3-03 K3-0 K3-0 K- K- K-0 K-09 K-08 K-07 K-06 K-05 K-04 K-03 K-0 K-0 K-05 K-04 K-03 K-0 K-0 RxTx+ RxTx- NMEA IN (+) NMEA IN (-) NMEA OUT (+) NMEA OUT (-) RxTx+ RxTx- S-0 # Base pcb RZ58 MODIFIED S-0 # Base pcb RZ58 MODIFIED K6-04 NMEA OUT (+) K6-03 NMEA OUT (-) K6-0 NMEA IN (+) K6-0 NMEA IN (-) K-03 K-0 K-0 K6-04 K6-03 K6-0 K6-0 K-03 K-0 K-0 K4-05 K4-04 K4-03 K4-0 K4-0 K-03 K-0 K-0 Scrn 0Vdc 4Vdc NMEA OUT (+) NMEA OUT (-) NMEA IN (+) NMEA IN (-) Scrn 0Vdc 4Vdc x,5mm Scrn 0Vdc 4Vdc 4Vdc x,5mm xx0,5mm x,5mm 4Vdc 4Vdc Wheelhouse Wheelhouse Fore peak Aft peak Fore peak Aft peak
55
23 September 2010 Rev: 01
MANUAL ECHO SOUNDER S-120 23 September 2010 Rev: 01 All information, pictures, drawings and technical schematics are the property of Radio Zeeland DMP. Unauthorized copying is prohibited. The content of
19 September 2011 Rev: 02
MANUAL RATE OF TURN SENSOR S-300 19 September 2011 Rev: 02 All information, pictures, drawings and technical schematics are the property of Radio Zeeland DMP. Unauthorized copying is prohibited. The content
Wandarm inkl. Montagebox und Netzteil Wall bracket incl. installation box and power supply
Wandarm inkl. Montagebox und Netzteil Wall bracket incl. installation box and power supply Beschreibung und technische Daten: Wandarm (IP-66) mit Montagebox und eingebautem Netzteil Passend für SANTEC
Delta 2.4 W-LAN EINBAUANLEITUNG MOUNTINGINSTRUCTIONS
Delta 2.4 W-LAN EINBAUANLEITUNG MOUNTINGINSTRUCTIONS Installation des Antennensystems DELTA 2.4 W-LAN Installationsvarianten Das DELTA 2.4 W-LAN System kann in verschiedenen Varianten installiert werden:
NEWSLETTER. FileDirector Version 2.5 Novelties. Filing system designer. Filing system in WinClient
Filing system designer FileDirector Version 2.5 Novelties FileDirector offers an easy way to design the filing system in WinClient. The filing system provides an Explorer-like structure in WinClient. The
Zusatz zur Betriebsanleitung Addendum to the Operating Instructions
Drive Technology \ Drive Automation \ System Integration \ Services Zusatz zur Betriebsanleitung Addendum to the Operating Instructions Austausch von MOVIGEAR -S01 durch MOVIGEAR -DSC-B Replacing MOVIGEAR
26 April 2012 Rev: 01
MANUAL WIND SENSOR S-130 26 April 2012 Rev: 01 All information, pictures, drawings and technical schematics are the property of Radio Zeeland DMP. Unauthorized copying is prohibited. The content of this
ITAC Bedienungsanleitung User manual. Originalbedienungsanleitung in deutscher Sprache. Für künftige Verwendung aufbewahren.
D Bedienungsanleitung User manual Originalbedienungsanleitung in deutscher Sprache. Für künftige Verwendung aufbewahren. This user manual contains important information for installation and operation.
Bedienungsanleitung SUNNYHEAT Standfuß (Art. Nr )
Bedienungsanleitung SUNNYHEAT Standfuß (Art. Nr. 221012) Der SUNNYHEAT Standfuß ist zur Positionierung Ihres Heizpaneels auf dem Standfuß gedacht. Anwendung findet der Standfuß bei allen Paneelen außer
VGM. VGM information. HAMBURG SÜD VGM WEB PORTAL USER GUIDE June 2016
Overview The Hamburg Süd VGM Web portal is an application that enables you to submit VGM information directly to Hamburg Süd via our e-portal Web page. You can choose to enter VGM information directly,
Newest Generation of the BS2 Corrosion/Warning and Measurement System
Newest Generation of the BS2 Corrosion/Warning and Measurement System BS2 System Description: BS2 CorroDec 2G is a cable and energyless system module range for detecting corrosion, humidity and prevailing
VGM. VGM information. HAMBURG SÜD VGM WEB PORTAL - USER GUIDE June 2016
Overview The Hamburg Süd VGM-Portal is an application which enables to submit VGM information directly to Hamburg Süd via our e-portal web page. You can choose to insert VGM information directly, or download
Aufbaudose mit Schalter Spacing box with switch. Montageanleitung mounting instructions
Aufbaudose mit Schalter Spacing box with switch Montageanleitung mounting instructions body head Aufbaudose mit Schalter Montageanleitung S. 2 mounting instructions p. 9 $ 0.2m Sicherheitshinweise Die
Delta 2.4 W-Lan EINBAUANLEITUNG MOUNTINGINSTRUCTIONS
Delta 2.4 W-Lan EINBAUANLEITUNG MOUNTINGINSTRUCTIONS Installation des Antennensystems DELTA 2.4 W-Lan Installationsvarianten Das DELTA 2.4 W-Lan System kann in verschiedenen Varianten installiert werden:
PoE Kit Mounting Instructions SG/XG 210/230/310/330/430/450
PoE Kit Mounting Instructions PoE Kit Mounting Instructions Please note ÌÌ Before installing/removing any LAN module please make sure that the appliance is powered off and power cables are removed. ÌÌ
EC DECLARATION OF CONFORMITY
Document: Sigma 120 Rev 09 Page 2 of 60 Industrieweg 17, 4538 AG Terneuzen NL P.O. Box 1070, 4530 GB Terneuzen NL Phone + 31 (0) 115 645400 Fax + 31 (0) 115 620040 \Formulier\000607.doc EC DECLARATION
PROFIBUS-DP Repeater 1 to 1 and 1 to 5 with optional level converter module
LSS PROFIBUS-DP Repeater 1 to 1 and 1 to 5 with optional level converter module The LSS PROFIBUS-DP repeaters 1 to 1 and 1 to 5 are used for coupling up to six PROFIBUS bus segments in RS 485 bus technology.
Snap-in switch for switches PSE, MSM and MCS 30
Product manual Snap-in switch for switches PSE, MSM and MCS 30 CONTENTS 1. PRODUCT DESCRIPTION 2. DATA AND DIMENSIONAL DRAWINGS 2.1. Technical Data 2.2. Dimensions of PSE with a Mounting Diameter 19 mm
Word-CRM-Upload-Button. User manual
Word-CRM-Upload-Button User manual Word-CRM-Upload for MS CRM 2011 Content 1. Preface... 3 2. Installation... 4 2.1. Requirements... 4 2.1.1. Clients... 4 2.2. Installation guidelines... 5 2.2.1. Client...
Standard Power Integrated Module
Standard Power Integrated Module flowpim 0 Features/ Eigenschaften - 1/3 Phases Input Rectifier - brake chopper - 3 phases inverter IGBT + FRED with open emitter - NTC module types / Produkttypen part
Beleuchteter Spiegel
Beleuchteter Spiegel 00099 00099 00099 0 Artikel Artikelnummer 00099 00099 00099 Maße 80x60 cm 0x80 cm 40x70 cm Teile im Lieferumfang Lieferumfang A B C Spiegel Schrauben Dübel Benötigtes Werkzeug (nicht
IR RECEIVER Bedienungsanleitung User s Manual
Bedienungsanleitung User s Manual Die zweite Generation des MBNLED RGB DMX POWER SUPPLY und des MBNLED PRO Controller RGB DMX bieten die Möglichkeit, LED Module über eine Infrarot Fernbedienung zu steuern.
BRUUDT Kennzeichenhalter für die Honda NC750X ab 2016 BRUUDT Tail Tidy for the Honda NC750X 2016 and onwards.
Montageanleitung Mounting instructions BRUUDT Kennzeichenhalter für die Honda NC750X ab 2016 BRUUDT Tail Tidy for the Honda NC750X 2016 and onwards. Noch einmal vielen Dank, dass Sie sich für unsere Produkte
ITAC Bedienungsanleitung User manual. Originalbedienungsanleitung in deutscher Sprache. Für künftige Verwendung aufbewahren.
D Bedienungsanleitung User manual Originalbedienungsanleitung in deutscher Sprache. Für künftige Verwendung aufbewahren. This user manual contains important information for installation and operation.
Electromagnetic Flowmeter FXE4000-DE43F
Pos: 2 /Grid-Layout/Titelblätter/Ersatzteilblätter/Durchfluss/FXE4000-DE43F @ 65\mod_1350460748604_3101.docx @ 523546 @ @ 1 === Ende der Liste für Textmarke Cover === Spare Parts List SPL/FXE4000-DE43F-EN
Hama GmbH & Co KG Postfach Monheim/Germany Tel. +49 (0)9091/502-0 Fax +49 (0)9091/
www.hama.de Hama GmbH & Co KG Postfach 80 86651 Monheim/Germany Tel. +49 (0)9091/502-0 Fax +49 (0)9091/502-274 hama@hama.de www.hama.de 00062249-05.05 Multimedia Kit für/for Mercedes Command 2.0 00062249
vcdm im Wandel Vorstellung des neuen User Interfaces und Austausch zur Funktionalität V
vcdm im Wandel Vorstellung des neuen User Interfaces und Austausch zur Funktionalität V0.1 2018-10-02 Agenda vcdm User Interface History Current state of User Interface User Interface X-mas 2018 Missing
Level 2 German, 2015
91126 911260 2SUPERVISOR S Level 2 German, 2015 91126 Demonstrate understanding of a variety of written and / or visual German text(s) on familiar matters 2.00 p.m. Friday 4 December 2015 Credits: Five
24 September 2009 Rev: 00
MANUAL RUDDER ANGLE INDICATOR S-100 24 September 2009 Rev: 00 All information, pictures, drawings and technical schematics are the property of Radio Zeeland DMP. Unauthorized copying is prohibited. The
AU-D2. Coaxial/Optical Audio Converter OPERATION MANUAL
AU-D2 Coaxial/Optical Audio Converter OPERATION MANUAL Table of Contents 1. Introduction 1 2. Features 1 3. Operation Controls and Functions 2 3.1 Input Panel Diagram 2 3.2 Output Panel Diagram 2 3.3 Switcher
p^db=`oj===pìééçêíáåñçêã~íáçå=
p^db=`oj===pìééçêíáåñçêã~íáçå= Error: "Could not connect to the SQL Server Instance" or "Failed to open a connection to the database." When you attempt to launch ACT! by Sage or ACT by Sage Premium for
JX3-PS1. Installationsanleitung. Version Lieferumfang
JX3-PS1 Spannungsversorgungsmodul Jetter AG Kontakte: Gräterstraße 2 E-Mail - Vertrieb: sales@jetter.de D-71642 Ludwigsburg E-Mail - Hotline: hotline@jetter.de Germany Telefon - Hotline: +49(0)7141/2550-444
MANUAL RZ255 NMEA multiplier
MANUAL RZ255 NMEA multiplier EC DECLARATION OF CONFORMITY We RADIO ZEELAND DMP B.V. Industrieweg 17, 4538 AG Terneuzen NL P.O. Box 1070, 4530 GB Terneuzen NL declare under our sole responsibility that
Sixpack with NTC. Features / Eigenschaften. power range up to 1,2 kv / 25 A (trench) 3 Phase IGBT FRED Inverter Bridge 6-Pack flow concept NTC
Sixpack with NTC flowpack 0 Features / Eigenschaften power range up to 1,2 kv / 25 A (trench) 3 Phase IGBT FRED Inverter Bridge 6-Pack flow concept NTC Copyright Tyco by Electronics Vincotech Finsinger
USB -> Seriell Adapterkabel Benutzerhandbuch
USB -> Seriell Adapterkabel Benutzerhandbuch 1. Produkt Eigenschaften 1 2. System Vorraussetzungen 1 3. Treiber Installation (Alle Windows Systeme) 1 4. Den COM Port ändern 2 5. Einstellen eines RS232
(825M) 2-Draht-Sender
Kamera SKS Bussystem 300004 (825M) 2-Draht-Sender 1. Installation Gefahr für Personen durch einen elektrischen Schlag. Verbrennungsgefahr, Geräteschäden und Fehlfunktionen. Bei der Installation sind die
DVR / QuickQuide Adroid
DVR 351.154/351.155 QuickQuide Adroid INSTRUCTION MANUAL GEBRUIKSAANWIJZING BEDIENUNGSANLEITUNG ENGLISH Setup IP-Camviewer Lite on Android. 351.154 en 351.155. Start with searching the right app IP-camviewer
HEAG 151, 152, 153, 154 Digital Converter
Montage- und Betriebsanleitung Installation and operating instructions MB095-11055704 Baumer_HEAG151-152-153-154_II_DE-EN (16A1) HEAG 151, 152, 153, 154 Digital Converter 1-2 Allgemeine Hinweise - Funktionsweise
DVR / QuickQuide Adroid
DVR 351.154/351.155 QuickQuide Adroid INSTRUCTION MANUAL GEBRUIKSAANWIJZING BEDIENUNGSANLEITUNG ENGLISH Setup IP-Camviewer Lite on IOS. 351.154 and 351.155. Start with searching the right app IP-camviewer
InductWarm. astro s. Montageanleitung InductWarm -Tische. Assembly Instruction InductWarm Tables. Version de/eng
InductWarm Montageanleitung InductWarm -Tische Assembly Instruction InductWarm Tables Version 0-.0 - de/eng astro s S W I T Z E R L A N D Allgemeine Hinweise und Lieferumfang / General instructions and
VN7640 FlexRay/CAN/LIN/Ethernet Interface Quick Start Guide. Version 1.1 English/Deutsch
VN7640 FlexRay/CAN/LIN/Ethernet Interface Quick Start Guide Version 1.1 English/Deutsch Quick Start Guide VN7640 ENGLISH 1 ENGLISH 1.1 Installation Step by Step Procedure Please use the drivers from the
Ex-Barriere für Diagnoseeinheit SITRANS DA400 / Ex-barrier for diagnostics unit SITRANS DA400 7MJ2010-1AA 0032
Ex-Barriere für Diagnoseeinheit SITRANS DA400 / Ex-barrier for diagnostics unit SITRANS DA400 7MJ2010-1AA 0032 Warnung Elektrischer Anschluss in explosionsgefährdeten Bereichen Anschluss und Inbetriebnahme
Betriebsarten-Umschalter Common mode / Differential mode switch
Betriebsarten-Umschalter Common mode / Differential mode switch Beschreibung: Der Betriebsarten-Umschalter CMDM 87 erweitert die Messmöglichkeiten zweier V-Netznachbildungen um die einer T- und Delta-Netznachbildung.
CABLE TESTER. Manual DN-14003
CABLE TESTER Manual DN-14003 Note: Please read and learn safety instructions before use or maintain the equipment This cable tester can t test any electrified product. 9V reduplicated battery is used in
rot red braun brown rot red RS-8 rot red braun brown R S V~
Kleiner Ring 9 /Germany Phone: 0049 4122 / 977 381 Fax: 0049 4122 / 977 382 Sample connections: Feedback module with integrated detection of occupied tracks for the RS-feedback bus (Lenz Digital plus)
UCON UCON Kurzanleitung Inbetriebnahme
UCON UCON Kurzanleitung Inbetriebnahme copyright G&D 24/08/2005 Irrum und techn. Änderungen vorbehalten 1. Was Sie zur Installation benötigen - UCON - 1:1 belegtes CAT-x Patchkabel - Kaltgerätekabel -
Installation Guide WLAN Interface
Installation Guide 7106 7206 7010 WLAN Interface EN Installation Guide This guide explains how to install the Ethernet LAN card in your label printer. You should conult your dealer or distributor for more
Electrical testing of Bosch common rail piezo injectors
Applies to generation CRI 3: Bosch 10-position order number 0 445 115 = CRI 3-16 (CRI 3.0) 1600 bar 0 445 116 = CRI 3-18 (CRI 3.2) 1800 bar 0 445 117 = CRI 3-20 (CRI 3.3) 2000 bar Tools required: Hybrid
UNIGATE CL Konfiguration mit WINGATE
UNIGATE CL Konfiguration mit WINGATE - UNIGATE CL Configuration via WINGATE Art.-Nr.: V3928 Deutschmann Automation GmbH & Co. KG Carl-Zeiss-Str. 8 D-65520 Bad Camberg Phone: +49-(0)6434-9433-0 Hotline:
Overview thermostat/ temperature controller
Thermostat TR-238 The Thermostat TR-238 is a electronic two-level controller for controlling of and in climate control units and vehicles. Voltage range (12V): Voltage range (24V): Control range: Hystereses:
Cameraserver mini. commissioning. Ihre Vision ist unsere Aufgabe
Cameraserver mini commissioning Page 1 Cameraserver - commissioning Contents 1. Plug IN... 3 2. Turn ON... 3 3. Network configuration... 4 4. Client-Installation... 6 4.1 Desktop Client... 6 4.2 Silverlight
FOX-150/E... FOX-350/E Solar Laderegler
FOX-150/E... FOX-350/E Solar Laderegler Solar Charge Regulator Einbauanleitung mounting guidelines Einbauanleitung Diese Anleitung ist eine Ergänzung zu folgenden Installationsanleitungen: D "FOX-150
OPERATING INSTRUCTIONS Test pump ZG 5.1. and ZG 5.2.
Elektromotoren und Gerätebau Barleben GmbH OPERATING INSTRUCTIONS Test pump ZG 5.1. and ZG 5.2. Elektromotoren und Gerätebau Barleben GmbH 2 Inhaltsverzeichnis Page 1 Use 4 2 Design features 4 2.1 Test
EC DECLARATION OF CONFORMITY
Document: RZ 710 Ver 01 Page 2 of 20 EC DECLARATION OF CONFORMITY We RADIO ZEELAND DMP B.V. Industrieweg 17, 4538 AG Terneuzen NL P.O. Box 1070, 4530 GB Terneuzen NL declare under our sole responsibility
ABB i-bus EIB. EIB Power Supply Units
ABB i-bus EIB EIB Power Supply Units Product Range Overview EIB Power Supplies ABB STOTZ-KONTAKT GmbH, 2002 - SK 029 F 02 E Product Range Overview EIB Power Supplies! EIB Power Supply, 320 ma SV/S 30.320.5!
Monitor VIS 3xx Kurzanleitung
Monitor VIS 3xx Kurzanleitung 19.08.08 Art. Nr. 22261 Inhalt: 1. Spezifikationen...2 2. Tastenfunktionen...2 3. Menüführung und Einstellungen...3 Technik nach Maß Wöhler Monitor VIS 3xx 1. Spezifikationen
Bedienungsanleitung / User Manual. PAR 56 RGB LED PAR 64 RGB LED (183x10mm LED s) mit 5 DMX Kanälen/ with 5 DMX channles
Bedienungsanleitung / User Manual PAR 56 RGB LED PAR 64 RGB LED (183x10mm LED s) mit 5 DMX Kanälen/ with 5 DMX channles Inhalt 1 Sicherheitsbestimmungen... 3 2 Übersicht... 3 3 Funktionen... 4 3.1 Automatischer
AKTIVE DVB-T ZIMMERANTENNE ANSCHLUSSHINWEISE ACTIVE DVB-T INDOOR ANTENNA CONNECTION INSTRUCTIONS
K la vi er l ac ko p tik AKTIVE DVB-T ZIMMERANTENNE ANSCHLUSSHINWEISE ACTIVE DVB-T INDOOR ANTENNA CONNECTION INSTRUCTIONS ZA 8970 DRUCKS0682.indd 1 05.09.12 15:15 VerpAckunGsinhAlT UKW / UHF / VHF Flachantenne
Tube Analyzer LogViewer 2.3
Tube Analyzer LogViewer 2.3 User Manual Stand: 25.9.2015 Seite 1 von 11 Name Company Date Designed by WKS 28.02.2013 1 st Checker 2 nd Checker Version history Version Author Changes Date 1.0 Created 19.06.2015
Release Notes BRICKware 7.5.4. Copyright 23. March 2010 Funkwerk Enterprise Communications GmbH Version 1.0
Release Notes BRICKware 7.5.4 Copyright 23. March 2010 Funkwerk Enterprise Communications GmbH Version 1.0 Purpose This document describes new features, changes, and solved problems of BRICKware 7.5.4.
EINBAUHINWEISE INSTALLATION INSTRUCTIONS
EINBAUHINWEISE INSTALLATION INSTRUCTIONS FÜR JEDEN ANSPRUCH DAS RICHTIGE FAHRWERK. KW automotive GmbH Aspachweg 14 74427 Fichtenberg Telefon: +49 7971 9630-0 Telefax: +49 7971 9630-191 www.kwsuspensions.de
ITAC Bedienungsanleitung User manual. Originalbedienungsanleitung in deutscher Sprache. Für künftige Verwendung aufbewahren.
ITAC10100 D gb Bedienungsanleitung User manual Originalbedienungsanleitung in deutscher Sprache. Für künftige Verwendung aufbewahren. This user manual contains important information for installation and
Electrical tests on Bosch unit injectors
Valid for Bosch unit injectors with order numbers 0 414 700 / 0 414 701 / 0 414 702 Parts Kit Magnet*: - F00H.N37.925 - F00H.N37.933 - F00H.N37.934 * For allocation to the 10-place Bosch order number,
Hama GmbH & Co KG Postfach Monheim/Germany Tel. +49 (0)9091/502-0 Fax +49 (0)9091/
www.hama.de Hama GmbH & Co KG Postfach 80 86651 Monheim/Germany Tel. +49 (0)9091/502-0 Fax +49 (0)9091/502-274 hama@hama.de www.hama.de 00062248-05.05 Multimedia Kit für/for Audi Naviplus/ VW/Seat/Skoda
Universe Square Suspension
Universe Square Suspension NL Installatie handleiding DE Installationsanleitung EN Installation manual 1 NL Informatie / DE Information/ EN Information Veiligheidsinformatie Onderbreek altijd de stroomtoevoer
CB RADIO Service Manual AE 6890
CB RADIO Service Manual AE 6890 Downloaded from www.cbradio.nl Technische Mitteilung zu AE 6890 Problem: Bei Montage einer schlecht geerdeten Antenne oder einer Antenne mit schlechtem SWR sehr nahe am
1. Komponenten des Bausatzes
1. Komponenten des Bausatzes Der Teilesatz 0510 590044 besteht aus folgenden Komponenten. 1 x Halter für Lasermarkierungen 3 x Lasermarkierungsleuchten mit Positionshalter 1 x Anschlußleiste für Lasermarkierungen
EL-21SY. 2 in, 1 out v1.3 HDMI Switcher OPERATION MANUAL
EL-21SY 2 in, 1 out v1.3 HDMI Switcher OPERATION MANUAL Table of Contents 1. Introduction 1 2. Features 1 3. Package Contents 1 4. Operation Controls and Functions 2 4.1 Front Panel Diagram 2 4.2 Rear
DATENBLATT / DATASHEET
DATENBLATT / DATASHEET AEQUILUX DMX PLAYER 1024 / 2048 Abb. Ähnlich Illustration similar BESCHREIBUNG / DESCRIPTION Der AEQUILUX DMX Player dient zur Lichtsteuerung des AEQUILUX Systems. Das Gerät kann
Installation Instructions
EN DE Installation Instructions WLAN Installation Kit, 300 Mbps, 5 GHz, 16 dbi AK-4 Wireless Kit Scope of delivery Junction box AK-4 (1x) 1 Connection board AK-4 CB with 12VDC power supply unit (1x) 2
Bedienungsanleitung Operation Manual
Bedienungsanleitung Operation Manual Laminatcutter XP-215 Laminate cutter XP-215 www.cutinator.com 1. Anschlag auf der Ablage Auf der Ablage der Stanze befinden sich drei Arretierungen für den Anschlag.
Zehnder ComfoWell 320
Benefits All air treatment functions available: attenuator, fine filter, active carbon filter, manifold box Modular design Compact dimensions Easy to clean Components connected with locking slides for
ELMEKO GmbH + Co. KG Graf-Zeppelin-Str Liebenscheid Germany Tel. +49/2736/
LED-Schaltschrankleuchten LLE-400 und LLE-700 LED Enclosure Lighting LLE-400 and LLE-700 Hochvolt-LED-Technik, Anschluss an 230V AC 2 Varianten: mit Bewegungsmelder oder Türendschalter mit 230V Steckdose
Externer Temperaturfühler External temperature sensor
Externer Temperaturfühler External temperature sensor 3124.400 Kurzanleitung Quick guide E Kurzanleitung DE 1 Allgemeine Hinweise Der Temperaturfühler ist kompatibel mit den Schaltschrank-Kühlgeräten der
SensoDirect 150. Lovibond Water Testing. Data Retrieve Software SW E2005. Tintometer Group. ph/orp DO CD/TDS. Bedienungsanleitung. Instruction Manual
Lovibond Water Testing Tintometer Group SensoDirect 150 Data Retrieve Software SW E2005 DE GB Bedienungsanleitung Seite 2 5 Instruction Manual Page 5 7 CD/TDS ph/orp DO www.lovibond.com DE Inhaltsverzeichnis
IDG. Drehzahlsensor / Speed Sensor
Drehzahlen sicher erfassen, anzeigen und kontrollieren For reliable measurement, control and indication of rotational speeds Analogsignal 1-Kanal 1-channel analog signal IDG Drehzahlsensor / Speed Sensor
UCON/s UCON/s Kurzanleitung Inbetriebnahme
UCON/s UCON/s Kurzanleitung Inbetriebnahme copyright G&D 24/08/2005 Irrum und techn. Änderungen vorbehalten 1. Was Sie zur Installation benötigen - UCON/s - 1:1 belegtes CAT-x Patchkabel - CATPRO2(bei
VIDEO CALL CAMERA G-VCAM-01
VIDEO CALL CAMERA G-VCAM-01 EN AUS GUTEM GRUND ENGLISH 07-10 2 SAFETY AND INFORMATION Safety 7 This camera is designed to transmit video and audio signals. All other uses are expressly prohibited. 7 Protect
ELMTEC. Drehzahlsensoren Speed Sensors 1 Kanal Hall Zoll Familie 1 Channel Hall Inch Type
Drehzahlsensoren Speed Sensors 1 Kanal Hall Zoll Familie 1 Channel Hall Inch Type Kurzdaten Versorgung Frequenzbereich Betriebstemperatur Schutzart (IEC 529) 0 15.000 Hz -40 +125 C IP67, IP69K Data summary
STRATEGISCHES BETEILIGUNGSCONTROLLING BEI KOMMUNALEN UNTERNEHMEN DER FFENTLICHE ZWECK ALS RICHTSCHNUR FR EIN ZIELGERICHTETE
BETEILIGUNGSCONTROLLING BEI KOMMUNALEN UNTERNEHMEN DER FFENTLICHE ZWECK ALS RICHTSCHNUR FR EIN ZIELGERICHTETE PDF-SBBKUDFZARFEZ41-APOM3 123 Page File Size 5,348 KB 3 Feb, 2002 TABLE OF CONTENT Introduction
Produktdatenblatt. Artikel Nr.: Wandaufbauleuchte, Aviar, Weiß-satiniert, V AC/50-60Hz, 40,00 W. Technische Daten.
Produktdatenblatt Artikel Nr.: 341114 Wandaufbauleuchte, Aviar, Weiß-satiniert, 220-240V AC/50-60Hz, 40,00 W Technische Daten Charakteristik Material Farbe Glas Weiß-satiniert Optik im Lieferumfang Elektrische
Produktdatenblatt. Artikel Nr.: Deckeneinbauring, Mizar I, Weiß-matt, 12V AC/DC, 1x max. 35,00 W. Technische Daten.
Produktdatenblatt Artikel Nr.: 110010 Deckeneinbauring, Mizar I, Weiß-matt, 12V AC/DC, 1x max. 35,00 W Technische Daten Charakteristik Material Farbe Aluminium Druckguss Weiß-matt Optik im Lieferumfang
hanit Assembly Instruction - Sandbox System Thar -
Thank you for purchasing a hanit recycling plastic product, We wish you a lot of pleasure with that product. Please find below important installation instructions which need to be taken into consideration
Typenreihe GH Lifting Solenoids
Hubmagnete Lifting Solenoids Bauart Hubmagnete der Reihe GH können mit Durchmessern zwischen 5 mm und 65 mm und mit Hublängen von 8 bis 60 mm gefertigt werden. Serien mäßig wer den sie mit Wellenenden
Technische Mitteilung / Service Bulletin
Betrifft: Subject: Betroffenes Luftfahrtgerät: Type affected: Betroffene Geräte-Nr.: Models affected: Einstufung: Classification: Dringlichkeit: Accomplishment: Grund: Reason: Circuit Breaker Schaltungsänderung
MANUAL_EN ANLEITUNG_DE PHONE SUITE SYNCHRONISATION SOFTWARE
MANUAL_EN ANLEITUNG_DE PHONE SUITE SYNCHRONISATION SOFTWARE 2 PHONE SUITE MANUAL PHONE SUITE MANUAL 3 RESERVATION Technical Data is subject to change without notice. Changes, errors and misprints may not
Anleitung für einen Perlen-Metallring in abgewandeltem Cubic-RAW Tutorial for a beaded metal ring in modified Cubic-RAW
Anleitung für einen Perlen-Metallring in abgewandeltem Cubic-RAW Tutorial for a beaded metal ring in modified Cubic-RAW JR = Japanische Rocaille TR = Tschechische Rocaille Verwendetes Material JS = Japanese
Produktdatenblatt. Artikel Nr.: Wandaufbauleuchte, Alpha II, Weiß, V AC/50-60Hz, 100,00 W. Technische Daten.
Produktdatenblatt Artikel Nr.: 341107 Wandaufbauleuchte, Alpha II, Weiß, 220-240V AC/50-60Hz, 100,00 W Technische Daten Charakteristik Material Farbe Weiß Optik im Lieferumfang Elektrische Daten Leistung
Qualitätsmanagement-Handbuch Serviceinformation: _Serviceinformation H0201_1_Batterietrennschalter.doc Formblatt. ÜS;Linearlifte AL1
Serviceinformation Thema Batterietrennschalter 200185065 kann brechen Seite:1/7 Produktgruppe ÜS;Linearlifte AL1 Artikelnummer Produktgruppencode H0201 Servicecode 200185065 H0201 K0012 A0001 Verfasser
MU-307 A SAFETY INSTRUCTIONS SICHERHEITSHINWEISE FEATURES MERKMALE
SAFETY INSTRUCTIONS Read all safety instruction before operating the amplifiers. 1. Install equipment as follow condition: - Install at flat place, not bending curved. - Do not install near the water and
Electrical testing of Bosch common rail Injectors
Electrical testing of Bosch common rail Injectors Contents: 1. Adapter cable for Hybridtester FSA 050 (article number 0 684 010 050 / 1 687 023 571) 2. Electrical testing of Bosch common rail solenoid
Laser LightmaXX CLUB 2.0 / 4.0 SERIES
Seite 1 von 8 Laser LightmaXX CLUB 2.0 / 4.0 SERIES ACHTUNG! Seite 2 von 8 Laserschutzbestimmungen: Durch die starke Bündelung des Laserstrahls ist die gesamte Lichtenergie auf eine geringe Fläche konzentriert.
Lithium Fotoakku Ladeset Lithium Photo rechargeable battery Set
Lithium Fotoakku Ladeset Lithium Photo rechargeable battery Set Technische Daten technical features:: Eingangsspannung: 100-240V AC Input Voltage: 100-240V AC Ausgangsspannung: 3,85V / 7,3V DC Output Voltage: