Publications. (as of July 28, 2014)

Transkript

1 Dept. of Production Management Technical University of Berlin Prof. Dr. H.O. Günther Publications (as of July 28, 2014) Editorship Journals 1. Editor-in-chief of the Flexible Services and Manufacturing Journal, published by Springer, New York, since 2009 (SCI-indexed) 2. Managing Editor of the journal OR Spectrum (SCI-indexed), published by Springer, Heidelberg ( ; co-editor ; advisory board member: and 2008-) 3. Editorial Board Member of the journal Computers & Industrial Engineering (SCI-indexed), published by Elsevier, Amsterdam (since 2004) 4. Advisory board member of the Journal of the Korean Institute of Industrial Engineers (since 2006) 5. Editorial Board Member of the journal Electronic Business Management (since 2008), published by the Electronic Business Management Society, Taiwan 6. Editorial Board Member of the Journal of the Chinese Institute of Industrial Engineers, published by the Chinese Institute of Industrial Engineers, Taiwan (since 2004) 7. Editorial Board Member of the International Journal of Information Systems for Logistics and Management, published in Taiwan (since 2004) Journal special issues 1. Special issue of the Flexible Services and Manufacturing Journal on Logistics and Maritime Systems, to appear 2014, jointly with E.P. Chew (Singapore), M. Christiansen (Norway), H. Kopfer (Germany) and K.H. Kim (Korea) 2. Special issue of the Flexible Services and Manufacturing Journal on Environmental Sustainability in Supply Chains, No. 1-2, 2014, jointly with J.C. Fransoo (The Netherlands), W. Jammernegg (Austria) 3. Special issue of the Flexible Services and Manufacturing Journal on Maritime Container Logistics and Onshore Transportation Systems, jointly with E.P. Chew (Singapore), H. Kopfer (Germany) and K.H. Kim (Korea), Part 1: 2011; Part 2: 2012; Part 3: Special issue of the Flexible Services and Manufacturing Journal on Logistics and Supply Chain, No. 1-2, 2010, and No. 1, 2012, jointly with M. Grunow (Germany), D. Pisinger (Denmark) 5. Special issue of the Flexible Services and Manufacturing Journal on Production and Operations Management in the Automotive Industry, No. 3-4, 2010, and No. 2, 2012, jointly with H. Meyr (Germany)

2 Günther: Publications (July 28, 2014) 2 6. Special issue on IT-based Planning and Control of Seaport Container Terminals and Freight Transportation Systems, of OR Spectrum, jointly with E.P. Chew (Singapore), H. Kopfer (Germany), and K.H. Kim (Korea), No. 3, Special Issue on Supply chain planning and advanced planning systems of OR Spectrum, jointly with H. Meyr (Germany), No. 1, Special Issue on OR in the Electronics Industry of OR Spectrum, jointly with C.-F. Chien (Taiwan), No. 3, Special Issue on Scheduling and control of automated manufacturing systems of OR Spectrum, jointly with T.E. Lee (Korea), No. 3, Special Issue on Container terminals and terminal operations of OR Spectrum, jointly with K.-H. Kim (Korea), No. 4, Special Issue on Supply Chain Management of OR Spectrum, jointly with M. Gen (Japan), No. 4, Special Issue on Container Terminal Logistics of OR Spectrum, jointly with K.-H. Kim (Korea), No. 1-2, Special Issue on OR in the Process Industries of OR Spectrum, jointly with P. van Beek (The Netherlands), No. 3-4, Special Issue on Production and Logistics of OR Spectrum, jointly with K. Inderfurth (Germany), No. 2, 1997 Edited books 1. Günther, H.-O., H. Meyr (eds.), Supply Chain Planning: Quantitative Decision Support and Advanced Planning Solutions. Springer, Mattfeld, D., Günther, H.-O., Suhl, L., Voß, S (Hrsg.), Informations- und Kommunikationssysteme in Supply Chain Management, Logistik und Transport. DS&OR Lab, Universität Paderborn, 2008 (in German). 3. Kim, K.-H., Günther, H.-O. (eds.), Container Terminals and Cargo Systems Design, Operations Management, and Logistics Control Issues. Springer, Günther, H.-O., Mattfeld, D., Suhl, L., Management logistischer Netzwerke: Entscheidungsunterstützung, Informationssysteme und OR-Tools. Physica-Verlag, 2007 (in German). 5. Günther, H.-O., Kim, K.-H. (eds.), Container Terminals and Automated Transport Systems. Springer, Günther, H.-O., Mattfeld, D., Suhl, L., Supply Chain Management und Logistik: Optimierung, Simulation, Decision Support. Physica-Verlag, 2005 (in German). 7. Günther, H.-O., van Beek, P. (eds.), Advanced Planning and Scheduling Solutions in Process Industry, Springer, 2003 Book series 1. Managing Editor of the book series Produktion und Logistik, jointly with B. Fleischmann (Augsburg), M. Grunow (München), S. Helber (Hannover), K. Inderfurth (Magdeburg), H. Kopfer (Bremen), H. Meyr (Hohenheim), S. Spengler (Braunschweig), H. Stadtler (Darmstadt), H. Tempelmeier (Köln), G. Wäscher (Magdeburg). Gabler Verlag, Wiesbaden ( ). 2. Book series Produktion und Logistik / Production and Logistics, jointly with W. Domschke (Darmstadt), A. Drexl (Kiel), B. Fleischmann (Augsburg), H. Stadtler (Darmstadt), H. Tempelmeier (Köln), Physica Verlag, Heidelberg (until 1997).

3 Günther: Publications (July 28, 2014) 3 Conference proceedings 1. Günther, H.-O., Kim, K.-H., Kopfer, H., The 2012 International Conference on Logistics and Maritime Systems, Bremen, 2012 (on Flash Memory). 2. Günther, H.-O., Kim, K.-H., Kopfer, H., IT-based Planning and Control of Seaport Container Terminals and Transportation Systems, Bremen, 2008 (on CD). Authored Books 1. Günther, H.-O., Tempelmeier, H., Produktion und Logistik, 11th ed., Books on Demand, Norderstedt, 2014 (in German). 2. Günther, H.-O., Tempelmeier, H., Übungsbuch Produktion und Logistik, 8th ed., Books on Demand, Norderstedt, 2013 (in German). 3. Günther, H.-O., Tempelmeier, H., Produktionsmanagement: Einführung mit Übungsaufgaben, 2nd ed., Springer, Berlin, 1995 (in German). 4. Günther, H.-O., Produktionsplanung bei flexibler Personalkapazität. Poeschel, Stuttgart, 1989 (in German). 5. Günther, H.-O., Mittelfristige Produktionsplanung: Konstruktion und Vergleich quantitativer Modelle. Minerva, München, 1982 (in German). 6. Günther, H.-O., FACTORY: Simulation eines Produktionsbetriebes. FU Berlin, 1980 (in German). Papers in refereed journals Papers in progress 1. Kannegiesser, M., Günther, H.-O., Autenrieb, N., The time to sustainability optimization approach for sustainable supply chain network design 2. Polat, O., Kulak, O., Günther, H.-O., Design of feeder service networks in maritime container shipping under unstable demand conditions Papers submitted 1. Meiler, M., Tonke, D., Grunow, M., Günther, H.-O.,, Pattern-based supply network planning in the pharmaceutical industry 2. Günther, H.-O., Kannegiesser, M., Autenrieb, N., The role of electric vehicles for supply chain sustainability in the automotive industry 3. Polat, O., Kalayci, C.B., Kulak, O., Günther, H.-O., A perturbation based variable neighborhood search heuristic for solving the vehicle routing problem with simultaneous pickup and delivery with time limit Published and accepted research articles 1. Dörmer, J., Günther, H.-O., Gujjula, R., Master production scheduling and sequencing at mixedmodel assembly lines in the automotive industry. Flexible Services and Manufacturing, available online: DOI /s (to appear 2015). 2. Polat, O., Günther, H.-O., Kulak, O., The feeder network design problem: Application to container services in the Black Sea region. Maritime Economics and Logistics, available online: doi: /mel (to appear 2014). 3. Günther, H.-O., The block planning approach for continuous time based dynamic lot sizing and scheduling. Business Research, 7 (2014),

4 Günther: Publications (July 28, 2014) 4 4. Mattik, I., Amorim, P., Günther, H.-O., Hierarchical scheduling of continuous casters and hot strip mills in the steel industry: a block planning application. International Journal of Production Research, 52 (2014), Kannegiesser, M., Günther, H.-O., Sustainable development of global supply chains Part I: Sustainability optimization framework. Flexible Services and Manufacturing, 26 (2014), Kannegiesser, M., Günther, H.-O., Gylfason, O., Sustainable development of global supply chains Part II: Investigation of the European automotive industry. Flexible Services and Manufacturing, 26 (2014), Kulak, O., Polat, O., Gujjula, R., Günther, H.-O., Strategies for improving a long-established terminal's performance: A simulation study of a Turkish container terminal. Flexible Services and Manufacturing, 25 (2013), Karrer, C., Alicke, K., Günther, H.-O., A framework to engineer production control strategies and its application in electronics manufacturing. International Journal of Production Research, 50 (2012), Amorim, P., Günther, H.-O., Almada-Lobo, B., Multi-objective integrated production and distribution planning of perishable products. International Journal of Production Economics, 138 (2012), Golz, J., Gujjula, R., Günther, H.-O., Rinderer, S., Ziegler, M., Part feeding at high-variant mixed-model assembly lines. Flexible Services and Manufacturing, 24 (2012), Farahani, P., Grunow, M., Günther, H.-O., Integrated production and distribution planning for perishable food products. Flexible Services and Manufacturing, 24 (2012), Gujjula, R., Werk, S. Günther, H.-O., A heuristic based on Vogel's approximation method for sequencing mixed-model assembly lines. International Journal of Production Research, 49 (2011), Kannegiesser, M., Günther, H.-O., An integrated optimization model for managing the global value chain of a chemical commodities manufacturer. Journal of the Operational Research Society, 62 (2011), Bilgen, B., Günther, H.-O., Integrated production and distribution planning in the fast moving consumer goods industry: A block planning application. OR Spectrum, 32 (2010), Günther, H.-O., Seiler, T., Operative transportation planning in consumer goods supply chains. Flexible Services and Manufacturing, 21 (2009), Yilmaz, I.O., Günther, H.-O., Jain, S., Simulation of mixed-model PCB assembly lines with group setup and by-pass conveyors. International Journal of Advanced Manufacturing Technology, 42 (2009), Kannegiesser, M., Günther, H.-O., van Beek, P., Grunow, M., Habla, C., Value chain management for commodities: a case study from the chemical industry. OR Spectrum, 31 (2009), Günther, H.-O., Kulak, O., Yilmaz, I.O., A GA-based solution approach for balancing printed circuit board assembly lines. OR Spectrum, 30 (2008), Grunow, M., Günther, H.-O., Burdenik, H., Alting, L., Evolving production network structures. CIRP Annals Manufacturing Technology, Vol. 56, No.1 (2007), Neuhaus, U., Günther, H.-O., Development of a reactive scheduling system for application in chemical batch production. Journal of Operations and Logistics, 1 (2007), No. 1, IV.1-IV Grunow, M., Günther, H.-O., Westinner, R., Supply optimization for the production of raw sugar. International Journal of Production Economics, 110 (2007), Kulak, O., Yilmaz, I.O., Günther, H.-O., PCB assembly scheduling for collect-and-place machines using genetic algorithms. International Journal of Production Research, 45 (2007), Hübner, R., Günther, H.-O., Tactical Supply Network Planning: An Example from Specialty Chemicals Industry. Asia Pacific Management Review, 12 (2007),

5 Günther: Publications (July 28, 2014) Yilmaz, I.O., Grunow, M., Günther, H.-O., Yapan, C., Development of group setup strategies for makespan minimization in PCB assembly. International Journal of Production Research, 45 (2007), Günther, H.-O., Kim K.H., Container terminals and terminal operations. OR Spectrum, 28(2006), Grunow, M., Günther, H.-O., Lehmann, M., Strategies for dispatching AGVs at automated seaport container terminals. OR Spectrum, 28 (2006), Lehmann, M., Grunow, M., Günther, H.-O., Deadlock handling for real-time control of AGVs at automated seaport container terminals. OR Spectrum, 28 (2006), Günther, H.-O., Grunow, M., Neuhaus, U., Realizing block planning concepts in make-and-pack production using MILP modelling and SAP APO. International Journal of Production Research, 44 (2006), Lütke Entrup, M., Günther, H.-O., van Beek, P., Grunow, M., and Seiler, T., MILP approaches to shelf life integrated planning and scheduling in yogurt production. International Journal of Production Research, 43 (2005), Grunow, M., Günther, H.-O., Schleusener, M., Yilmaz, I.O., Operations planning for collectand-place machines in PCB assembly. Computers & Industrial Engineering, 47 (2004), Grunow, M., Günther, H.-O., Yang, G., Development of a decision support model for scheduling clinical studies and assigning medical personnel. Health Care Management Science, 7 (2004), Grunow, M., Günther, H.-O., Lehmann, M., Dispatching multi-load guided vehicles in highly automated seaport container terminals. OR Spectrum, 26 (2004), Grunow, M., Günther, H.-O., Schleusener, M., Component allocation for printed circuit board assembly using modular placement machines. International Journal of Production Research, 41 (2003), Grunow, M., Günther, H.-O., Yang, G., Plant coordination in pharmaceutics supply networks. OR Spectrum, 25 (2003), Grunow, M., Günther, H.O., Lehmann, M., Campaign planning for multi-stage batch processes in the chemical industry. OR Spectrum, 24 (2002), Günther, H.-O., Krüger, H., Schrecker, A., Einsatzplanung Fahrerloser Transportsysteme untersucht an einem Praxisfall aus dem Spezialmaschinenbau. Logistik Management, 3(2001), No. 1, (in German). 37. Grunow, M., Günther, H.O., Föhrenbach, A., Simulation-based performance analysis and optimisation of electronics assembly equipment. International Journal of Production Research, 38 (2000), Blömer, F., Günther, H.-O., Kaminiarz, B., Simulation-aided material flow control and strategic cost analysis of a processing plant. Chemical Engineering and Technology, 23 (2000), Blömer, F., Günther, H.O., LP-based heuristics for scheduling chemical batch processes. International Journal of Production Research, 38 (2000), Föhrenbach, A., Günther, H.-O., "SIMPLE++". OR Spektrum, 22 (2000), (in German). 41. Blömer, F., Günther, H.-O., Kaminiarz, B., Simulationsgestützte Materialflußsteuerung und strategische Kostenanalyse einer verfahrenstechnischen Anlage. Chemie-Ingenieur-Technik, 71 (1999), (in German). 42. Blömer, F., Günther, H.O., Scheduling of a multi-product batch process in the chemical industry. Computers in Industry, 36 (1998), Günther, H.O., Gronalt, M., Zeller, R., Job sequencing and component setup on a surface mount placement machine. Production Planning and Control, 9 (1998), Gronalt, M., Grunow, M., Günther, H.-O., Zeller, R., A heuristic for component switching on SMT placement machines. International Journal of Production Economics, 53 (1997),

6 Günther: Publications (July 28, 2014) Günther, H.O., Grunow, M., Schorling, C., Workload planning in small lot printed circuit board assembly. OR Spektrum, 19 (1997), Günther, H.-O., Schrecker, A., "PALLETMANAGER / CARGOMANAGER". OR Spektrum, 19 (1997), (in German). 47. Günther, H.-O., Gronalt, M., Piller, F., Component Kitting in Semi-automated Printed Circuit Board Assembly. International Journal of Production Economics, 43 (1996), Grunow, M., Günther, H.-O., "AMPL". OR Spektrum, 17 (1995), 1-3 (in German). 49. Drexl, A., Fleischmann, B., Günther, H.-O., Stadtler, H., Tempelmeier, H., Konzeptionelle Grundlagen kapazitätsorientierter PPS-Systeme. Zeitschrift für betriebswirtschaftliche Forschung (ZfbF), 46 (1994), (in German). 50. Günther, H.-O., Netzplanorientierte Auftragsterminierung bei offener Fertigung. OR Spektrum, 14 (1992), (in German). 51. Günther, H.-O., Bestellmengenplanung aus logistischer Sicht. Zeitschrift für Betriebswirtschaft (ZfB), 61 (1991), (in German). 52. Günther, H.-O., Numerical Evaluation of Heuristics for the Multi-item Single-Level Capacitated Lot-Size Problem. Engineering Costs and Production Economics (continued as International Journal of Production Economics), 14 (1988), Günther, H.-O., Schneeweiß, Ch., Kapazitative Wirkungen von Arbeitszeitflexibilisierungen. Zeitschrift für betriebswirtschaftliche Forschung (ZfbF), 40 (1988), Günther, H.-O., Planning Lot Sizes and Capacity Requirements in a Single Stage Production System. European Journal of Operational Research (EJOR), 31 (1987), Feser, P., Günther, H.-O., Schneeweiß, Ch., Coordination of Production Schedules and Distribution. Engineering Costs and Production Economics (continued as International Journal of Production Economics), 9 (1985), Günther, H.-O., Ein Modell zur mittelfristigen Glättung der Produktion und des Personalbedarfs. Zeitschrift für Betriebswirtschaft (ZfB), 55 (1985), (in German). 57. Günther, H.-O., A Comparison of two Classes of Aggregate Production Planning Models under Stochastic Demand. Engineering Costs and Production Economics (continued as International Journal of Production Economics), 6 (1982), Papers in non-refereed and professional journals 1. Günther, H.-O., Produktionsplanung in der Prozessindustrie. Wirtschaftswissenschaftliches Studium (WIST), 34 (2004), (in German). 2. Günther, H.-O., Ressourceneinsatzplanung bei Chargenproduktion in der chemischen Industrie. Wirtschaftswissenschaftliches Studium (WIST), 34 (2004), (in German). 3. Grunow, M., Günther, H.-O., Viergutz, B., APS-System auf dem Prüfstand, PPS-Management, Heft 1/2002, (in German). 4. Föhrenbach, A., Grunow, M., Günther, H.-O., Schleusener, M., Leistungsabstimmung von Bestückungslinien Einsatz eines modernen Simulationstools für die SMD-Montage, PLUS Produktion von Leiterplatten und Systemen, 2(2000), (in German). 5. Föhrenbach, A., Grunow, M., Günther, H.-O., Simulation und Optimierung von Montagesystemen für elektronische Baugruppen, Industrie-Management, 16(2000), Heft 3, (in German). 6. Günther, H.-O., Lösung linearer Optimierungsprobleme mit Hilfe von Tabellenkalkulationsprogrammen. Wirtschaftswissenschaftliches Studium (WIST), 28 (1999), Teil I: Einführung und Aufgabenstellung, , Teil II: Lösung, (in German). 7. David, St., Günther, H.-O., Lochmann, M., Vermittlung von Produktionsaufträgen im Internet. Industrie-Management, 14(1998), Heft 1, (in German).

7 Günther: Publications (July 28, 2014) 7 8. Günther, H.-O., Föhrenbach, A., Grunow, M., Simulation von Bestückungsautomaten in der Elektronikmontage. ZwF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 93(1998), (in German). 9. Günther, H.-O, Blömer, F., Grunow, M., Moderne Softwaretools für das Supply Chain Management. ZwF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 93(1998), (in German). 10. Von Harten, B., Günther, H.-O., Blömer, F., Kaminiarz, B., Simulation macht Kosten transparenter. Chemie-Produktion, Oktober 1997, (in German). 11. Blömer, F., Günther, H.-O., OR-Ansätze für die Produktionsplanung in der Prozeßindustrie. Industrie-Management, 13(1997), Heft 4, (in German). 12. Günther, H.O., Blömer, F., Simulation der Produktionslogistik Einsatzmöglichkeiten in der Prozeßindustrie. Fördertechnik - Zeitschrift für Logistik, Materialfluß, Transport und Lagertechnik, Heft 7, 1997, 5-7 (in German). 13. Günther, H.-O., Grunow, M., Bildung von Auftragsserien bei der Montage von Leiterplatten. Wirtschaftswissenschaftliches Studium (WIST), 25 (1996), Teil I: Die Problemstellung, S , Teil II: Die Lösung, S (in German). 14. Günther, H.-O., Gronalt, M., Zeller, R., Optimierung der Auftragsreihenfolge für einen SMD- Bestückungsautomaten. Industrie Management, 12 (1996), (in German). 15. Günther, H.-O. Tempelmeier, H., Systeme und Verfahren der Produktionssteuerung. CIM- Management, 11 (1995), Heft 1, (in German). 16. Günther, H.-O., Gronalt, M., Piller, F., Computergestützte Simulation eines hochautomatisierten Montagesystems. Management & Computer, 2 (1994), (in German). 17. Günther, H.-O., Dimensionierung der Produktionskapazität bei Nachfrageunsicherheit. Wirtschaftswissenschaftliches Studium (WIST), 23 (1994), (in German). 18. Günther, H.-O., Gronalt, M., Computergestützte Entscheidungsanalyse eines Kapazitätserweiterungsprojektes. Wirtschaftswissenschaftliches Studium (WIST), 23 (1994), (in German). 19. Günther, H.-O., Liefermengenplanung unter logistischen Aspekten. Theorie und Praxis der Wirtschaftsinformatik. 29 (1992), Heft 168, (in German). 20. Günther, H.-O., Betriebswirtschaftliche Anwendungen von Kürzeste-Wege-Algorithmen. Das Wirtschaftsstudium (WISU), 7/1991, (in German). 21. Günther, H.-O., Bestimmung kostenminimaler Produktionspläne mit Hilfe der Tabellenkalkulation. Wirtschaftswissenschaftliches Studium (WIST), 19 (1990), (in German). 22. Günther, H.-O., Kostenminimale Produktionspläne bei mehrstufiger Leistungserstellung. Wirtschaftswissenschaftliches Studium (WIST), 19 (1990), (in German). 23. Günther, H.-O., Schneeweiß, Ch., Webersinn, B., Abstimmung von Vertriebs- und Produktionsprogramm in einem Unternehmen der Fahrzeugindustrie. Marketing-ZFP, 11(1989), (in German). 24. Günther, H.-O., Integrierte Produktions- und Distributionsplanung in einem Unternehmen der Waschmittelindustrie. Wirtschaftswissenschaftliches Studium (WIST), 14 (1985), (in German). Contributions to conference proceedings and book volumes 1. Polat, O., Kulak, O., Günther, H.-O., Feeder Service Network Design Under Unstable Demand Environments. In: L. C. Tang and K.-H. Kim (Eds.), Proceedings of the 2013 International Conference on Logistics and Maritime Systems, Singapore, 2013, 1-7 (on CD). 2. Günther, H.-O., Kannegiesser, M., "Minimize time to sustainability" als Optimierungsansatz für die nachhaltige Entwicklung von Supply Chains. In: G. Reiner, J. Fichtinger, M. Poiger, and R. Schodl, (Hrsg.), Trendberichte zum Operations Management. Verlag Peter Lang, Frankfurt, 2013,

8 Günther: Publications (July 28, 2014) 8 3. Günther, H.-O., Kannegiesser, M., Towards a sustainable supply chain design in the European automotive industry. Paper presented at the EUROMA 2013 (Conference of the European Operations Management Association), Dublin, June 7-12, 2013 (on flash memory) 4. Günther, H.-O., Golz, J., Kanban vs. proactive control of material supply at mixed-model assembly lines in the automotive industry. In: H.Y. Mak and H.K. LO (Eds.), Transportation & Logistics Management. Hong Kong Society for Transportation Studies, Hong Kong, 2012, Polat, O., Günther, H.-O., Kulak, O., The containership feeder network design problem: The new Izmir port as hub in the Black Sea. Proceedings of the 2012 International Conference on Logistics and Maritime Systems, Bremen, 2012, (on Flash Memory), Polat, O., Kulak, O., Günther, H.-O., An adaptive neighborhood search approach for the VRPSPDTL. Proceedings of the 2012 International Conference on Logistics and Maritime Systems, Bremen, 2012, (on Flash Memory), Polat, O., Kulak, O., Taner, M.E., Günther, H.-O., The impact of the seasonal demand fluctuation on the containership routing problem. Proceedings of the 2012 International Conference on Logistics and Maritime Systems, Bremen, 2012, (on Flash Memory) 8. Günther, H.-O., Kannegiesser, M., Gylason, O., Global Supply Chain Sustainability Optimization Framework for the Automobile Industry. In: W.Y. Szeto, S.C. Wong, N.N. Sze (Eds.), Transportdynamics. Hong Kong Society for Transportation Studies, Hong Kong, 2011, Günther, H.-O., Continuous vs. Discrete Lot Sizing and Scheduling: The Case of a Beverage Manufacturer. In: Proceedings of the Twelfth Asia Pacific Industrial Engineering and Management Systems Conference, ed. by J. Gao, APIEMS, Beijing, 2011 (ISBN: ), Amorim, P., Günther, H.-O., Almada-Lobo, B., Tackling Freshness in Supply Chain Planning of Perishable Products in Proceedings of VII ALIO/EURO Workshop on Applied Combinatorial Optimization, published by ALIO-EURO, Porto, Portugal, 2011, , Gujjula, R., Günther, H.-O., An Efficient Heuristic to Sequence Mixed-Model Assembly Lines. In: Proceedings of the 2010 IEEE International Conference on Industrial Engineering and Engineering Management, ed. by Z. Lian, Z. Wu, X. Min, R. Jiao, IEEE, Singapore 2010 (ISBN: ), Günther, H.-O., Kannegiesser, M., The impact of CO2 regulations on transportation in supply chains. In: A. Sumalee, W.H.K. Lam, H.W. Ho, B. Siu (Eds.), Transportation and urban Sustainability. Hong Kong Society for Transportation Studies, Hong Kong, 2010, Gujjula, R., Golz, J., Günther, H.-O., In-house transportation at high-variant mixed-model assembly lines. In: A. Sumalee, W.H.K. Lam, H.W. Ho, B. Siu (Eds.), Transportation and urban Sustainability. Hong Kong Society for Transportation Studies, Hong Kong, 2010, Kannegiesser, M., Günther, H.-O., Otten, D., Global supply chain sustainability in the consumer goods industry. Proceedings of the 1 st International Conference on Logistics and Maritime Systems, Busan, Korea, 2010, Gujjula, R., Günther, H.-O., Storage block assignment for import containers in automated container terminals. Proceedings of the 1 st International Conference on Logistics and Maritime Systems, Busan, Korea, 2010, Dörmer, J., Günther, H.-O., Gujjula, R., Friedrich, K., Master production scheduling for highvariant mixed-model assembly lines. Proceedings of the 17 th International Annual EurOMA Conference: Managing Operations in Service Economies. Porto, Portugal, 2010 (ISBN: , on CD. 17. Golz. J., Gujjula, R., Günther, H.-O., Part feeding at high-variant mixed-model assembly lines. Proceedings of the 17 th International Annual EurOMA Conference: Managing Operations in Service Economies. Porto, Portugal, 2010 (ISBN: , on CD. 18. Farahani, P., Grunow, M., Günther, H.-O., A Heuristic Approach for Short-Term Operations Planning in a Catering Company. In: Proceedings of the 2009 IEEE International Conference on Industrial Engineering and Engineering Management, ed. by Hongsyi Sun, Roger Jiao and Min Xie, IEEE, Singapore 2009 (ISBN: ),

9 Günther: Publications (July 28, 2014) Gujjula, R., Günther, H.-O., Scheduling UtilityWorkers at Mixed-Model Assembly Lines. In: Proceedings of the 2009 IEEE International Conference on Industrial Engineering and Engineering Management, ed. by Hongsyi Sun, Roger Jiao and Min Xie, IEEE, Singapore 2009 (ISBN: ), Karrer, C., Alicke, K., Günther, H.-O., Engineering adaptive production control strategies for complex discrete manufacturing with an illustration from the EMS industry. In: Proceedings of the 2009 IEEE International Conference on Industrial Engineering and Engineering Management, ed. by Hongsyi Sun, Roger Jiao and Min Xie, IEEE, Singapore 2009 (ISBN: ), Gujjula, R., Günther, H.-O., Rescheduling blocked workpieces at mixed-model assembly lines with just-in-sequence supply. Proceedings of the 10 th Asia Pacific Industrial Engineering & Management Systems Conference (APIEMS 2009), Kitakyushu, Japan, 2009, Günther, H.-O., Lueb, M., The Frutado Case An interactive training tool for introducing Advanced Planning Systems in educational institutions. Proceedings of the 10 th Asia Pacific Industrial Engineering & Management Systems Conference (APIEMS 2009), Kitakyushu, Japan, 2009, Günther H.-O., An Application of MILP-based Block Planning in the Chemical Industry. In: X.-S. Zhang, D.-G. Liu, M. Fushimi, X. Tong (eds.), Operations Research and Its Applications: The Eighth International Symposium on Operations Research and Its Applications (ISORA 09). World Publishing Corporation, Beijing, 2009, (Reprinted in: Proceedings of the 20th National Conference of Australian Society for Operations Research, Gold Coast, Australia. Australian Society for Operations Research, 2009, (ISBN: Günther H.-O., An Application of MILP-based Block Planning in the Chemical Industry. In: X.-S. Zhang, D.-G. Liu, M. Fushimi, X. Tong (eds.), Operations Research and Its Applications: The Eighth International Symposium on Operations Research and Its Applications (ISORA 09). World Publishing Corporation, Beijing, 2009, Günther H.-O., Lean OR in supply chain planning: The quest for simple and effective decision making tools. In: E. Kozan (ed.), Proceedings of the 20th National Conference of Australian Society for Operations Research, Gold Coast, Australia. Australian Society for Operations Research, 2009, K2.1-K2.13 (ISBN: Günther H.-O., An MILP-Based Approach to Short-Term Production Scheduling and Lot Sizing with Major and Minor Setups: A Case Study from the Beverage Industry. Proceedings of the 4th Multidisciplinary International Conference on Scheduling: Theory and Applications (MISTA 2009), ed. by J. Blazewicz, M. Drozdowski, G. Kendall, B. McCollum, Dublin, Ireland, 2009, Gujjula, R., Günther, H.-O., Resequencing Mixed-Model Assembly Lines under Just-In- Sequence constraints. Proceedings of the CIE39: International Conference on Computers and Industrial Engineering, ed. by I. Kacem, Université de Technologie de Troyes, France, 2009, Kulak, Ö., Bulkan, S., Günther, H.-O., Scheduling Component Placement Operations for Collect-and-Place Type PCB Assembly Machines. Operations Research Proceedings Springer, Berlin u.a., 2009, Bilgen, B., Günther, H.-O., An MILP model for production and distribution planning in consumer goods supply chains. Operations Research Proceedings Springer, Berlin u.a., 2009, Günther, H.-O., Seiler, T., Transportation planning in consumer goods supply chains. In: H.P. Lo, S.C.H. Leung, S.M.L. Tam (Eds.), Transportation and Management Science. Hong Kong Society for Transportation Studies, Hong Kong, 2008, Gujjula, R., Günther, H.-O., Integrated scheduling of equipment for quayside transport in automated seaport container terminals. In: H.P. Lo, S.C.H. Leung, S.M.L. Tam (Eds.), Transportation and Management Science. Hong Kong Society for Transportation Studies, Hong Kong, 2008, Günther, H.-O., The Block Planning Approach: A Case Study Application from the Beverage Industry. Proceedings of the 2008 IEEE: International Conference on Industrial Engineering and

10 Günther: Publications (July 28, 2014) 10 Engineering Management, ed. by Martin Helander, Min Xie, Roger Jiao, IEEE, Singapore 2008, Gujjula, R., Günther, H.-O., The Impact of Storage Block Assignment for Import Containers on AGV Dispatching in Highly Automated Seaport Container Terminals. Proceedings of the 2008 IEEE: International Conference on Industrial Engineering and Engineering Management, ed. by Martin Helander, Min Xie, Roger Jiao, IEEE, Singapore 2008, Grunow, M., Günther, H.-O., Development of a decision support tool for supply network planning: A case study from the chemical industry. In: X.-S. Zhang, D.-G. Liu, Y. Wang (eds.), The 7 th International Symposium on Operations Research and its applications. World Publishing Corporation, Beijing, 2008, Kulak, O., Polat, O., Günther, H.-O., Performance evaluation of container terminal operations. IT-based Planning and Control of Seaport Container Terminals and Transportation Systems, ed. by H.-O. Günther, K.-H. Kim, H. Kopfer, Bremen, 2008 (on CD). 36. Gujjula, R., Günther, H.-O., A simulation study of integrated block assignment for import containers and quayside transport. IT-based Planning and Control of Seaport Container Terminals and Transportation Systems, ed. by H.-O. Günther, K.-H. Kim, H. Kopfer, Bremen, 2008 (on CD). 37. Hübner, R., Günther, H.-O., Using AHP for strategic production site assessment: A case study from specialty chemicals industry. In: Günther, H.-O., Mattfeld, D., Suhl, L., Supply Network and Logistics Management. Physica-Verlag, 2007, Meiler, M., Günther, H.-O., Grunow, M., Network-wide campaign planning for multi-stage processes in the chemical industry. Proceedings of the 2007 IEEE: International Conference on Industrial Engineering and Engineering Management, ed. by Martin Helander, Min Xie, Roger Jiao, Kay Chuan Tan, IEEE, Singapore 2007, Günther, H.-O., Kannegiesser, M., An MILP model application for supply network planning in the production of chemical commodities. Proceedings of the 2007 IEEE: International Conference on Industrial Engineering and Engineering Management, ed. by Martin Helander, Min Xie, Roger Jiao, Kay Chuan Tan, Singapore 2007, Günther, H.-.O., Yilmaz, I.O., Jain, S., Balancing and scheduling of mixed-model PCB assembly lines. Proceedings of the 8 th Asia Pacific Industrial Engineering & Management Systems Conference (APIEMS 2007), Kaohsiung, Taiwan, 2007, Paper ID 580 (on CD). 41. Kulak, O., Yilmaz, I.O., Günther, H.-O., Baskili devre karti (PCB) montaj hatlarinin genetic algoritmalar ile dengelenmesi, The 27th National Conference on Operations Research and Industrial Engineering, Izmir, Turkey, 2007 (in Turkish). 42. Günther, H.-O., Habla, C., Kannegiesser, M., van Beek, P., Grunow, M., Supply network planning with dynamic spot sales pricing: a case study from the chemical industry. In: Proceedings of the International MultiConference of Engineers and Computer Scientists. International Association of Engineers, Hong Kong, China, 2007, Grunow, M., Günther, H.-O., Meiler, M, Campaign planning based on aggregation and a novel continuous-time network flow formulation. Proceedings of the International Conference on Intelligent Manufacturing and Logistics Systems, Kitakyushu, Japan, February 26-28, Günther, H.-O., Kannegiesser, M., Grunow, M., van Beek, P., Habla. C., Value chain management for commodities in the chemical industry. Proceedings of the Workshop on Logistics and Manufacturing Networks, Seoul, Korea, February 22-24, Grunow, M., Günther, H.-O., Development of a MILP based decision support system for product allocation in a production network. Proceedings of the Workshop on Logistics and Manufacturing Networks, Seoul, Korea, February 22-24, Grunow, M., Günther, H.-O., Yang, G., Hierarchisch integrierte Produktionsplanung in Supply Chains der Prozessindustrie: Ein Anwendungsbeispiel aus der chemisch-pharmazeutischen Industrie. In: H. Corsten, H. Missbauer, (Eds.), Produktions- und Logistikmanagement. Verlag Franz Vahlen, München, 2007, (in German). 47. Yilmaz, I.O., Günther, H.-O., A group setup strategy for PCB assembly on a single automated placement machine. In: H.-D. Haasis, H. Kopfer, J. Schönberger (Eds.), Operations Research Proceedings Springer, Berlin u.a., 2006,

11 Günther: Publications (July 28, 2014) Günther, H.-O., van Beek, P., Grunow, M., Lütke Entrup, M., Zhang, S., Mixed integer linear programming approaches to shelf life integrated planning and scheduling in scalded sausage production. In: M. Morlock, C. Schwindt, N. Trautmann, J. Zimmermann (Eds.), Perspectives on Operations Research, Gabler, Wiesbaden, 2006, pp Yilmaz, I.O., Günther, H.-O., Kulak, O., A genetic algorithm for balancing printed circuit board assembly lines. Proceedings of the 7th Asia Pacific Industrial Engineering and Management Systems Conference, Bangkok, 2006, Günther, H.-O., Computers and Supply Chain Planning. Proceedings of the 36th International Conference on Computers & Industrial Engineering, Taipei, Taiwan, June 20-23, 2006, (on CD). 51. Grunow, M., Günther, H.-O., Burdenik, H., Advanced Planning for the Design of a Global Production Network for Electrical Components, Proceedings of the 36th International Conference on Computers & Industrial Engineering, Taipei, Taiwan, June 20-23, 2006, (on CD). 52. Yilmaz, I.O., Günther, H.-O., Nelson, H., A hybrid genetic algorithm for grouping PCBs in electronics assembly, Proceedings of the 36th International Conference on Computers & Industrial Engineering, Taipei, Taiwan, June 20-23, 2006, (on CD). 53. Neuhaus, U., Günther, H.-O., Development of a reactive scheduling system for application in the process industry. Proceedings of the International Conference on Information Systems, Logistics and Supply chain. Lyon, France, May 14-17, 2006 (on CD). 54. Günther, H.-O., Grunow, M., Lehmann, M., Neuhaus, U., Yilmaz, I.O., Simulation of transportation activities in automated seaport container terminals. In: E. Kozan (ed.), Proceedings of the Second International Workshop on Intelligent Logistics Systems. Queensland University of Technology, Brisbane, Australia, 2006 (on CD) 55. Neuhaus, U., Günther, H.-O., Entwicklung eines reaktiven Schedulingsystems für die Prozessindustrie. In: H.-D. Haasis, H. Kopfer, J. Schönberger (Eds.), Operations Research Proceedings Springer, Berlin u.a., 2006, (in German). 56. Günther, H.-O., Grunow, M., Lehmann, M., Einsatzplanung Fahrerloser Transportsysteme in Seehafen-Container-Terminals. In: Jacquemin, M., Pibernik, R., Sucky, E. (Hrsg.), Quantitative Methoden der Logistik und des Supply Chain Management. Verlag Dr. Kovac, Hamburg, 2006, (in German). 57. Lütke Entrup, M., Grunow, M., Günther, H.-O., Seiler, T., van Beek, P., An MILP modelling approach for shelf life integrated planning in yoghurt production. In: H. Fleuren, D. den Hertog, P. Kort (Eds.), Operations Research Proceedings Springer, Berlin et al., 2005, Günther, H.-O., Supply Chain Management and Advanced Planning Systems. In: Günther, H.-O., Mattfeld, D., Suhl, L., Supply Chain Management und Logistik: Optimierung, Simulation, Decision Support. Physica, Heidelberg, 2005, Günther, H.-O., van Beek, P., Grunow, M., Lütke Entrup, M., Coverage of Shelf Life in in APS Systems. In: Günther, H.-O., Mattfeld, D., Suhl, L., Supply Chain Management und Logistik: Optimierung, Simulation, Decision Support. Physica, Heidelberg, 2005, Günther, H.-O., Kim K.H., Logistics control issues of container terminals and automated transportation systems. In: H.-O. Günther, H.-O., K.H. Kim (eds), Container Terminals and Automated Transport Systems. Springer, Berlin et al., 2005, V-Xii. 61. Kulak, O., Yılmaz, I.O., Günther, H.-O., Genetik Algoritma Esaslı PCB Montajı Optimizasyonu. Proceedings of the "5. Ulusal Üretim Arastirmalari Sempozyumu", Istanbul, 2005 (in Turkish). 62. Günther, H.-O., Grunow, M., Lehmann, M., AGV dispatching strategies at automated seaport container terminals. In: X.-S. Zhang, D.-G. Liu, L.-Y. Wu (eds.), Operations Research and its applications, World Publishing Corporation, Beijing, China, 2005, Günther, H.-O., Grunow, M., Neuhaus, U., Advanced planning and scheduling concepts for application in the consumer goods industry. In: Proceedings of the 18 th International Conference on Production Research, Salerno, Italy, 2005 (on CD). 64. Grunow, M., Günther, H.-O., Westinner, R., Supply optimization for the production of raw sugar, In: Proceedings of the 18 th International Conference on Production Research, Salerno, Italy, 2005 (on CD).

12 Günther: Publications (July 28, 2014) Günther, H.-O., Kulak, O., Yilmaz, I.O., Application of a minimum setup strategy in PCB assembly. In: M.B. Durmusoglu, C. Kahraman (eds.), Proceedings of the 35 th International Conference on Computers & Industrial Engineering, Istanbul Technical University, June 19-22, 2005, pp Kulak, O., Yilmaz, I.O., Günther, H.-O., GA-based unique setup strategies in PCB assembly. In: M.B. Durmusoglu, C. Kahraman (eds.), Proceedings of the 35 th International Conference on Computers & Industrial Engineering, Istanbul Technical University, June 19-22, 2005, pp Yilmaz, I.O., Günther, H.-O., Kulak, O., Grouping PCB assembly jobs for a single automated placement machine. In: M.B. Durmusoglu, C. Kahraman (eds.), Proceedings of the 35 th International Conference on Computers & Industrial Engineering, Istanbul Technical University, June 19-22, 2005, pp Günther, H.-O., Grunow, M., Lehmann, M., AGV dispatching strategies at automated container terminals. In: K.H. Kim (ed.), Proceedings of the International Workshop on Intelligent Logistics Systems. Research Center for Logistics Information Technology, Busan, Korea, 2005, Grunow, M., Günther, H.-O., Neuhaus, U., Ein MILP-Modell für die flexible Blockplanung bei Sortenproduktion. In: Lasch, R., Janker, C.G. (Hrsg.), Logistik Management. Gabler Deutscher Universitätsverlag, Wiesbaden, 2005, (in German). 70. Grunow, M., Günther, H.-O., Yang, G., Entwicklung eines interaktiven Scheduling-Support- Systems für verfahrenstechnische Prozesse. In: Günther, H.-O., Mattfeld, D., Suhl, L., Supply Chain Management und Logistik: Optimierung, Simulation, Decision Support. Physica-Verlag, 2005, (in German). 71. Lehmann, M., Grunow, M., Günther, H.-O., Performance evaluation of AGV dispatching strategies at automated container terminals. In: E. Kozan (ed.), Proceedings of the 5 th Asian Pacific Conference on Industrial Engineering and Management Systems, Brisbane 2004, pp Neuhaus, U., Günther, H.-O., Development of a reactive scheduling system for application on the process industry. In: E. Kozan (ed.), Proceedings of the 5 th Asian Pacific Conference on Industrial Engineering and Management Systems, Brisbane 2004, pp Yilmaz, I.O., Grunow, M., Günther, H.-O., Yapan, C., Using group setup strategies for makespan minimization in electronics assembly. In: E. Kozan (ed.), Proceedings of the 5 th Asian Pacific Conference on Industrial Engineering and Management Systems, Brisbane 2004, pp Grunow, M., Günther, H.O., Yang, G., Hierarchical Integration of supply network planning and production scheduling in the process industries. In: E. Kozan (ed.), Proceedings of the 5 th Asian Pacific Conference on Industrial Engineering and Management Systems, Brisbane 2004, pp Luetke Entrup, M., Grunow, M., Günther, H.-O., Seiler, T., Shelf life integrated planning in yoghurt production. In: E. Kozan (ed.), Proceedings of the 5 th Asian Pacific Conference on Industrial Engineering and Management Systems, Brisbane 2004, pp Schleusener, M., Grunow, M., Günther, H.-O., Balancing automated electronics assembly lines. In: E. Kozan (ed.), Proceedings of the 5 th Asian Pacific Conference on Industrial Engineering and Management Systems, Brisbane 2004, pp Günther, H.-O., Neuhaus, U., Advanced planning and scheduling in the consumer goods industry: Realizing block planning concepts for make-and-pack production using MILP modelling and SAP s APO software. In: L.N. van Wassenhove, A. de Meyer, E. Yücesan, E.D. Günes, L. Muyldermans (eds.), Operations management as a change agent, Vol. 2, INSEAD 2004, Günther, H.-O., Yang, G., Integration of simulation and optimization for production scheduling in the chemical industry. Proceedings of the 2 nd Industrial Simulation Conference 2004, Malaga, Spain, 2004,

13 Günther: Publications (July 28, 2014) Grunow, M., Günther, H.-O., Ehren, A., Lehmann, M., Simulation analysis of AGV system performance in container port terminals. Proceedings of the 2nd Industrial Simulation Conference 2004, Malaga, Spain, 2004, Günther, H.-O., Supply chain management and advanced planning systems: A tutorial. Proceedings of the 33 rd International Conference on Computers and Industrial Engineering, Jeju, Korea, Günther, H.-O., Ehren, A., Grunow, M., Lehmann, M., On-line and off-line dispatching of AGVs in container port terminals. Proceedings of the 7 th International Conference on Computers and Industrial Engineering, Jeju, Korea, Neuhaus, U., Günther, H.-O., Merkmalsbasierte Produktionsplanung mit SAP APO in der chemischen Sortenproduktion. In: Quantitative Methoden in ERP and SCM, hrsg. Von L. Suhl und S. Voß, DSOR Beiträge zur Wirtschaftsinformatik, Universität Paderborn, 2004, (in German). 83. Grunow, M., Günther, H.-O., Objektorientierte Simulation von Anlagen der Elektronikmontage. Operations Research Proceedings Springer, Berlin u.a., 2004, (in German). 84. Schleusener, M., Günther, H.-O., Leistungsabstimmung von Produktionslinien in der Elektronikmontage. Operations Research Proceedings Springer, Berlin u.a., 2004, (in German). 85. Günther, H.-O., van Beek, P., Advanced Planning and Scheduling in Process Industry. In: Günther, H.-O., van Beek P. (eds.), Advanced Planning and Scheduling Solutions in Process Industry, Springer, Berlin et al., 2003, Günther, H.-O., Grunow, M., Yang, G., A hierarchical modelling approach for scheduling and assignment of personnel in medical studies. Proceedings of the 7 th International Conference of the Decision Sciences Institute, Shanghai, Yang, G., Grunow, M., Günther, H.-O., Supply network planning and plant scheduling in the chemical-pharmaceutical industry A case study investigation. Proceedings of the 7 th International Conference of the Decision Sciences Institute, Shanghai, Günther, H.-O., Grunow, M., Schleusener, M., Yilmaz, I.O., Operations planning for collectand-place machines in PCB assembly. Proceedings of the 32 nd International Conference on Computers and Industrial Engineering, Limerick, 2003, Grunow, M., Günther, H.-O., Management of transnational production and distribution networks in the process industries. Proceedings of the 4 th Asian Pacific Conference on Industrial Engineering and Management Systems, Taipei Günther, H.-O., Grunow, M., Rath, P., Yang, G., An LP-based approach for workforce scheduling and assignment in manufacturing and service environments, Proceedings of the 4 th Asian Pacific Conference on Industrial Engineering and Management Systems, Taipei Lehmann, M., Grunow, M., Günther, H.-O., Dispatching multiple load AGVs in a highly automated container port environment. Proceedings of the 4 th Asian Pacific Conference on Industrial Engineering and Management Systems, Taipei Neuhaus, U., Günther, H.-O., Gür, B., Yang, G., An MILP model for flexible block planning in make-and-pack production. Proceedings of the 4 th Asian Pacific Conference on Industrial Engineering and Management Systems, Taipei Yang, G., Grunow, M., Günther, H.-O., A continuous time based modelling approach for coordinating material flows in multi-site production networks in the process industry. Proceedings of the 4 th Asian Pacific Conference on Industrial Engineering and Management Systems, Taipei Yilmaz, I.O., Grunow, M., Günther, H.-O., Schleusener, M., Savings-based heuristics for scheduling operations of a collect-and-place machine in SMT electronic boards assembly. Proceedings of the 4 th Asian Pacific Conference on Industrial Engineering and Management Systems, Taipei Grunow, M., Günther, H.-O., Lehmann, M., "Online- versus Offline-Einsatzplanung von Fahrerlosen Transportsystemen in Containerhäfen ", in: Logistikmanagement: Prozesse, Systeme, Aus-

14 Günther: Publications (July 28, 2014) 14 bildung, hrsg. v. T. Spengler, S. Voss, H. Kopfer, Springer: Heidelberg, 2003, S (in German). 96. Günther, H.-O., Grunow, M., Lehmann, M., A hierarchical modelling approach for co-ordinating production operations within a multi-plant supply network. Proceedings of the 9 th Bellmann Continuum, Beijing (China), 2002, Grunow, M., Günther, H.-O., "Simultaneous Engineering", in: Handwörterbuch der Unternehmensrechnung und Controlling, hrsg. v. H.-U. Küpper, A. Wagenhofer, Schäffer-Poeschel, Stuttgart, 2002, Sp (in German). 98. Günther, H.-O., Stichwort "Lagermanagement". In: R. Bühner (Hrsg.), Lexikon des Managementwissens, Oldenbourg, München, Wien, 2001, (in German). 99. Günther, H.-O., Nitschke, S., Stichwort "Automatisierung". In: R. Bühner (Hrsg.), Lexikon des Managementwissens, Oldenbourg, München, Wien, 2001, (in German) Günther, H.-O., Föhrenbach, A., Grunow, M., Simulation und Leistungsanalyse von Montagesystemen für elektronische Baugruppen. 15. Symposium Simulationstechnik ASIM 2001, Paderborn, 2001, (in German) Lehmann, M., Raffel, U., Günther, Wagner, G., Modellierung und Simulation von Fahrerlosen Transportsystemen als Multiagentensysteme. 4. DFG-Kolloquium SPP Agenten, Bonn, 2001 (in German) Grunow, M. Günther, H.-O., Multi-criteria optimisation of printed circuit board assembly operations. Proceedings of the 3 rd Asian Pacific Conference on Industrial Engineering and Management Systems, Global Link Publishing, Hongkong, 2000, Günther, H.-O., Grunow, M., Lehmann, M., Yang, G., A hierarchical linear optimization model for supply network planning in the chemical industry. Proceedings of the 3 rd Asian Pacific Conference on Industrial Engineering and Management Systems, Global Link Publishing, Hongkong, 2000, Schleusener, M., Grunow, M., Günther, H.-O., Optimization of PCB-assembly operations using modular placement machines. Proceedings of the 3 rd Asian Pacific Conference on Industrial Engineering and Management Systems, Global Link Publishing, Hongkong, 2000, Yang, G., Grunow, M., Günther, H.-O. Schrecker, A., An interactive decision support system for scheduling chemical batch processes. Proceedings of the 3 rd Asian Pacific Conference on Industrial Engineering and Management Systems, Global Link Publishing, Hongkong, 2000, Günther, H.-O., Stichwort "Hierarchische Produktionsplanung". In: H. Corsten (Hrsg.), Lexikon der Betriebswirtschaft, 4. Aufl., Oldenbourg, München, Wien, 2000, (in German) Günther, H.-O., Krüger, H., Schrecker, A., Simulationsgestützte Einsatzplanung Fahrerloser Transportsysteme, 14. Symposium Simulationstechnik ASIM 2000, Hamburg, (in German) Günther, H.-O., Krüger, H., Schrecker, A., Modellierung und Simulation Fahrerloser Transportsysteme. 6. Magdeburger Logistiktagung, Magdeburg, 2000 (in German) Günther, H.-O., Simulationsgestützte Optimierung der Konfiguration und des Betriebes von Bestückungsautomaten in der Elektronikmontage. Abschlusscolloquium zum DFG- Schwerpunktprogramm Modellierung der Produktion, Hannover, 2000 (in German) Grunow, M., Föhrenbach, A., Günther, H.-O., Simulation-based performance analysis and optimisation of electronics assembly equipment. Proceedings of the 15th International Conference on Production Research, Limerick, Ireland, 1999, Günther, H.-O., Föhrenbach, A., Grunow, M., Schorling, Ch., Modelling the daily order mix problem for a SMT assembly cell. Proceedings of the 5 th International conference of the Decision Sciences Institute, Athens, Greece, 1999, Günther, H.-O., Schrecker, A., Simulationsgestützte Leistungsanalyse Fahrerloser Transportsysteme. In: Logistik Management Intelligente I+K Techniken, hrsg. v. H. Kopfer, Ch. Bierwirth, 1999, Springer, Heidelberg, (in German).

15 Günther: Publications (July 28, 2014) Günther, H.-O., Schrecker, A., Stichwort Kommissionierung. In: Ch. Schulte (Hrsg.), Logistik Lexikon, Oldenbourg, München, Wien, 1999, (in German) Günther, H.-O., Schrecker, A., Stichwort Paletten- und Containerbeladung. In: Ch. Schulte (Hrsg.), Logistik Lexikon, Oldenbourg, München, Wien, 1999, (in German) Günther, H.-O., Werksübergreifende Produktionsplanung in Logistiknetzwerken der chemischen Industrie. 5. Magdeburger Logistiktagung Logistiknetzwerke, Magdeburg, 1999 (in German) Föhrenbach, A., Grunow, M., Günther, H.-O., Simulationsgestützte Optimierung in der Elektronikmontage. 13. Symposium Simulationstechnik ASIM 99, Weimar, 1999, (in German) Günther, H.-O., Kapitel Produktion. In Springers Handbuch der Betriebswirtschaftslehre, Band 1, Springer, Berlin u.a., 1998, (in German) Günther, H.-O., Materialflußsteuerung in der Einzel- und Kleinserienfertigung. In: H. Isermann (Hrsg.), Logistik, 2. Aufl., Verlag Moderne Industrie, Landsberg/Lech, 1998, (in German) Blömer, F., Günther, H.-O., Kaminiarz, B., Simulationsgestützte strategische Kostenanalyse einer verfahrenstechnischen Anlage. Tagung Logistik auf Umweltkurs, Magdeburg, 1997 (in German) Grunow, M., Günther, H.-O., Mühlhäußer, R., Optimisation of SMD placement operations in high-volume PCB assembly. Proceedings of the Workshop on Production Planning and Control, Mons, Belgium, 1996, Günther, H.-O., Stichwort "Mehrfunktionsarbeit", in: Handwörterbuch der Produktionswirtschaft, hrsg. v. W. Kern, H.-H. Schröder, J. Weber, 2. Auflage, 1996, Sp (in German) Günther, H.-O., Gronalt, M., Piller, F., A linear programming model for workload planning in printed circuit board assembly. Operations Research Proceedings 1994, Springer, Berlin et al., 1995, Günther, H.-O., Lagerhaltung und Materialdisposition mittels Datenverarbeitung. In: M.G. Zilahi- Szabo (Hrsg.), Kleines Lexikon der Informatik und Wirtschaftsinformatik, Oldenbourg, Wien, München, 1995, (in German) Günther, H.-O., Strauß, Ch., Flexible Schicht- und Personaleinsatzplanung. In: H. Corsten (Hrsg.), Handbuch Produktionsmanagement, Gabler, Wiesbaden, 1994, (in German) Günther, H.-O., Gronalt, M., Montageplanung in der Elektronikfertigung. In: H. Corsten (Hrsg.), Handbuch Produktionsmanagement, Gabler, Wiesbaden, 1994, (in German) Günther, H.-O., Stichwort "Beschaffungsorganisation". In: W. Wittmann, W. Kern, R. Köhler, H.- U. Küpper, K. v. Wysocki (Hrsg.), Handwörterbuch der Betriebswirtschaft, 5. Auflage, 1993, Poeschel, Stuttgart, Sp (in German) Faißt, J., Günther, H.-O., Schneeweiß, Ch., Ein Decision Support System zur Planung der Jahresarbeitszeit. In: J. Biethahn, W. Hummeltenberg, B. Schmidt (Hrsg.), Simulation als betriebliche Entscheidungshilfe, Band 2, Springer, Berlin u.a., 1991, (in German) Günther, H.-O., Ein Verfahren zur Bestellmengenplanung bei beschränkter Lagerkapazität, in: Operations Research Proceedings 1990, Springer, Berlin u.a., 1991, (in German) Günther, H.-O., A Heuristic Solution Procedure for Lot Sizing under Production and Storage Capacity Constraints. In: B.-H. Ahn (Ed.), Asian-Pacific Operations Research: APORS'88, Elsevier, Amsterdam, 1990, Günther, H.-O., Personalkapazitätsplanung und Arbeitsflexibilisierung. In: D. Adam, K. Backhaus, H. Meffert, H. Wagner (Hrsg.), Integration und Flexibilität: Eine Herausforderung für die Allgemeine Betriebswirtschaftslehre, Gabler, Wiesbaden, 1990, (in German) Bäuerle, A., Günther, H.-O., Schneeweiß, Ch., Produktionsplanung bei flexiblem Personaleinsatz. Operations Research Proceedings 1988, Springer, Berlin u.a., 1989, (in German) Günther, H.-O., Planung und Steuerung der Produktion bei flexiblen Arbeitszeiten. In: W. Lücke (Hrsg.), Betriebswirtschaftliche Steuerungs- und Kontrollprobleme, Gabler, Wiesbaden, 1988, (in German).

16 Günther: Publications (July 28, 2014) Günther, H.-O., The Design of an Hierarchical Model for Production Planning and Scheduling, In: S. Axsäter, Ch. Schneeweiß, E. Silver (Eds.), Multi-Stage Production Planning and Inventory Control, Springer, Berlin et al., 1986, Günther, H.-O., Heinrich, C., Production Smoothing and Lot-sizing. In: A. Chikan (ed.), New Results in Inventory Research, Elsevier, Amsterdam, 1986, Günther, H.-O., Revidierende Produktionsplanung bei Sortenfertigung. Operations Research Proceedings Springer, Berlin u.a., 1985, (in German) Günther, H.-O., Ein zweistufiges Modell zur Glättung der Produktion und des Personaleinsatzes. Operations Research Proceedings Springer, Berlin u.a., 1984, (in German) Günther, H.-O., Simulation von Praxisbezug durch computergestützte Unternehmensplanspiele. In: A. Hron u.a. (Hrsg.), Praxisbezug im wirtschaftswissenschaftlichen Studium, Bd. 2, Frankfurt, 1979, (in German). Book reviews 1. Pfohl, H.-Ch., Logistikmanagement: Funktionen und Instrumente. In: OR Spektrum, 19 (1997), S. 40 (in German). 2. Robrade, A.D., Dynamische Einprodukt-Lagerhaltungsmodelle bei periodischer Bestandsüberwachung. OR Spektrum, 14 (1992), S. 200 (in German). 3. Zimmermann, G., Produktionsplanung variantenreicher Erzeugnisse mit EDV. In: OR Spektrum, 12 (1990), S. 154 (in German). 4. Stadtler, H., Hierarchische Produktionsplanung bei losweiser Fertigung. In: OR Spektrum, 11 (1989), S. 255 (in German). Working papers 1. Lütke Entrup, M., Günther, H.-O., van Beek, P., Requirements of the production of sausages regarding APS systems. Schriften zum Produktionsmanagement, No. 11 (2005), TU Berlin. 2. Günther, H.O., Stichwort Kommissionierverfahren im Wirtschaftslexikon Themenbereich Logistik im Internetportal Business Village (published online, in German). 3. Günther, H.O., Stichwort Produktionsplanung in der Prozeßindustrie im Wirtschaftslexikon Themenbereich Logistik im Internetportal Business Village, (published online, in German). 4. Günther, H.O., Trautmann, N., Benchmark: Westenberger & Kallrath (1995), (published online, in German). 5. Blömer, F., Günther, H.-O., Numerical evaluation of MILP models for scheduling chemical batch processes. Diskussionspapier, TU Berlin, Föhrenbach. A., Grunow, M., Günther, H.-O., SMD-Bestückungsautomaten 1999, Eigenverlag, 1999 (in German). 7. Günther, H.-O., Einsatz von Simulations- und Optimierungsmodellen in der chemischen Industrie. Arbeitsbericht Nr. 73, Institut für Unternehmensführung und Unternehmensforschung, Ruhr- Universität Bochum, Oktober 1998, S (in German). 8. Günther, H.-O., Gronalt, M., Piller, F., Computersimulation der Einlastungs- und Ablaufplanung in einem hochautomatisierten System zur Bestückung von Leiterplatten: Dokumentation des Versuchslabors. Diskussionspapier, TU Berlin, 1994 (in German). 9. Eckert, W., Günther, H.-O., Aspekte praxisbezogener Hochschulausbildung. Im Auftrag des Präsidenten der Freien Universität Berlin herausgegeben vom Modellversuch Wirtschaftswissenschaft, Berlin 1978 (in German).