1. Kurslehrplan TECHNISCHES ZEICHNEN UND METHODEN DES INDUSTRIEINGENIEURWESENS
|
|
- Jonas Harry Koch
- vor 6 Jahren
- Abrufe
Transkript
1 1. Kurslehrplan TECHNISCHES ZEICHNEN UND METHODEN DES INDUSTRIEINGENIEURWESENS Akad. Jahr 2014/15 2. DOZENT 3. KREDITPUNKTE 8 BÜRO (Lage) Gebäude K WISSENSCHAFTLICHES FELD ING-IND/15 ADRESSE TELEFONNR. BÜRO xxx VORLESUNGEN LEHRSTUNDEN 78 ÜBUNGEN UND LABORSTUNDEN ANDERE STUDIENGANG Bachelor in Industrie- und Maschineningenieurwesen 6. SCHWER- PUNKT 7. JAHR 1. SEMESTER KURSSTATUS Pflichtfach 9. KURS- SPRACHE deutsch Die Lehrveranstaltung besteht aus mehreren Themengruppen: Grundlagen der Produktentwicklung Einführung in die methodische Produktentwicklung und Konstruktion Technisches Zeichnen im Maschinenbau Grundlegende Zeichnungsnormen: Zeichnungsarten, Maßstäbe, Linienarten und -breiten, Normschrift 10. KURZBESCHREIBUNG Darstellungsvarianten: Axonometrie, geklappte Ansichten, Schnitte, Einzelheit. Bemaßungsregeln, Bearbeitungs-, Härtungs- und Kantenangaben. Maßtolerierungsarten bei Bauteilen. Form- und Lagetoleranzen. Prinzip der Passung und Passsysteme. Kennzeichnung von Fügeverbindungen, Schmiede- und Gussteile. Welle-Nabe-Verbindung, Wälzlagerungen. Darstellung und Kennzeichnung von Verzahnungen. Normteile als Maschinenelemente. Analyse von Zusammenstellungszeichnungen. CAD-Einführung Aufbau und Bestandteile von CAD-Systemen. CAD-Modelle und Techniken.
2 CAD als Basis für weitere C-Techniken. Normteilbibliothek, Makros, Animation. CAD-Programm 3D-Inventor. Benutzeroberfläche, CAD-Befehle, Strukturbaum. Skizzierer, Teiledesign, Zusammenbau. Modellieren von Bauteilen mittels 3D-CAD, Zusammenbau von 3D-CAD- Bauteilen mit Nutzung von Normteilen zur Baugruppe und Maschine. Ableitung der Technischen Zeichnung mit 2D-CAD vom 3D-Modell. Erstellung der Zusammenstellungszeichnung mit Stückliste und einer 3D- Explosionszeichnung. Konstruktive Gestaltungslehre Grundregeln der Gestaltungslehre. Urformgerechtes Gestalten Gießen. Umformgerechtes Gestalten Biegen und Schmieden. Trenngerechtes Gestalten Spanende Fertigung. Fügegerechtes Gestalten Schweißen, Kleben, Löten. Montagegerechte Gestaltung. Beanspruchungsgerechte Gestaltung. Kostenmanagement in der Produktentwicklung Einführung, Grundlagen Methoden des Kostenmanagements Grundlagen der Kostenrechnung Einflussgrößen auf Herstellkosten Entwicklungsbegleitende Kalkulation 11. LEHRFORMAT UND KURSORGANISATION Die Vorlesung erfolgt durch den Dozenten im Frontalunterricht und vermittelt die Grundlagen. Die vermittelten Grundlagen werden im Übungsbetrieb durch den Dozenten und den Lehrassistenten vertieft. Am CAD-Arbeitsplatz wird der Umgang mit 3D/2D CAD für die konstruktive Gestaltung von Maschinenbauteilen und der Zusammenbau von Baugruppen praktisch durchgeführt. Technisches Zeichnen im Maschinenbau Die Regeln des Technischen Zeichnens werden vermittelt. Die Studenten sollen Technische Zeichnungen erstellen und als Dokumente lesen können. CAD-Einführung Der Umgang mit einem modernen 3D-CAD-System als Werkzeug der Konstruktion wird gelehrt. 12. LERNZIELE Konstruktive Gestaltungslehre Die Studierenden werden an die grundlegende fertigungsspezifische konstruktive Gestaltung von Bauteilen herangeführt. Kostenmanagement in der Produktentwicklung Die Studierenden erlernen das Kostenmanagement in früher Phase der Produktentwicklung mit seinen Methoden und Hilfsmitteln und können diese anwenden. Sie erkennen Kostensenkungspotenziale am Produkt sowie im Produkterstellungsprozess und können diese umsetzen.
3 13. THEMEN Der Kurs behandelt folgende Themen: 1. Technisches Zeichnen 2. CAD und andere Darstellungstechniken 3. Konstruktive Gestaltungslehre 4. Kostenmanagement in der Produktentwicklung 14. BASISLITERATUR 15. ZUGANGS- VORAUSSETZUNGEN 16. EMPFEHLUNGEN 17. LERNERFOLGS- BEWERTUNG
4 1. COURSE SYLLABUS OF Technical Drawing and Industrial Engineering Methods Accad. year 2014/15 2. PROFESSOR 3. ECTS CREDITS 8 OFFICE Building K SCIENTIFIC FIELD ING-IND/15 ADDRESS OFFICE PHONE xxx LECTURES COURSE HOURS 78 EXERCISES AND LABS STUDY PROGRAMME OTHERS Bachelor in Industrial and Mechanical Engineering 6. MAJOR IN 7. YEAR 1 st SEMESTER 1 st 8. PROGRAMME STATUS Core 9. COURSE LANGUAGE german The course consists of several topics: Technical Drawing in Mechanical Engineering Basic drawing standards: Drawing types, yardsticks, types and width of lines, standard script. 10. DESCRIPTION Representation options: Axonometry, arranged views, sectional drawing, detail drawing. Dimensioning standards, technical surfaces, signs of hardness and edges. Types of dimension tolerances of components. Form and position tolerances. Principles of fit and fit systems. Labelling of join connections, forge and cast parts. Shaft-hub connections, rolling bearings. Representation and labelling of dovetail connections. Standard parts as machine elements. Analysis of assembly drawings. Introduction into CAD Structure and parts of CAD systems. CAD models and techniques. CAD as basis for further C techniques. Library of standard parts, macros, animation. CAD program 3D-Inventor. User interface, CAD imperatives, structure tree. Scetcher, design of parts, assembly. Modelizing of machine units by 3D-CAD, assembling of 3D-CAD-components
5 by the use of standard parts of assemblies and machines. Derivation of technical drawings with 2D-CAD from the 3D model. Compilation of assembly drawings with a parts list and a 3D explosion drawing. Constructive design engineering Basic standards of constructive design engineering. Primary shaping by casting. Metal forming by bending and forging. Cutting with geometrically well defined tool edges. Joining by welding, bonding and soldering. Design engineering conform to assembly. Design engineering conform to operational demands Cost management during product development Introduction, fundamentals Methods of cost management Basics of cost accounting Determining factors of manufacturing costs Early identification of costs during product development 11. TEACHING FORMAT and ORGANIZA-TION The lessons are presented by the professor in frontal teaching and explain the basics. The professor and the teaching assistant deepen the basics by exercises. With a CAD Workstation the using of 3D/2D CAD for constructive design of machine parts and the assembly of machine blocks will done. Technical Drawing in Mechanical Engineering The lecture provides the rules of technical drawing und should enable the students to compile engineering detail drawings and to evaluate engineering detail drawings as documents. Introduction into CAD The handling with a modern 3D-CAD system as a tool for construction is taught. 12. LEARNING OUTCOMES Constructive design engineering The lecture aims at preparing students for understanding of basic constructive design engineering of components, especially with regard to the particularities of production processes. Cost management during product development Students learn methods and resources of cost management during early phases of product development and how to use them. They recognize capabilities to decrease costs of products and of product development and can transfer this knowledge. 13. TOPICS The course will cover the following topics: 1. Technical Drawing 2. CAD and other visual technics 3. Constructive design engineering 4. Cost management during product development 14. BASIC BIBLIOGRAPHY 15. ELIGIBILITY
6 16. RECOMMAN-DATIONS 17. STUDENT ASSESSMENT
Syllabus Course description
Syllabus Course description Course title Technical Drawing and Industrial Engineering Methods Course code 42107 Scientific sector ING-IND/15 Degree Bachelor in Industrial and Mechanical Engineering (L-9)
MehrProseminar - Organisation und Personal Seminar Organisational Theory and Human Resource Management
1 Proseminar - Organisation und Personal Seminar Organisational Theory and Human Resource Management Veranstaltungsnummer / 82-021-PS08-S-PS-0507.20151.001 Abschluss des Studiengangs / Bachelor Semester
MehrGERMAN LANGUAGE COURSE SYLLABUS
University of Split Department of Professional Studies GERMAN LANGUAGE COURSE SYLLABUS 1 COURSE DETAILS Type of study programme Study programme Course title Course code ECTS (Number of credits allocated)
MehrPresentation of Module 52 "Production Management"
Presentation of the Module "Production Management (52)" LRV - 1851334 Presentation of Module 52 "Production Management" January 11, 2012 Karlsruhe Institute of Technology Campus South Bld. 10.21, Benz
MehrSyllabus Course description
Syllabus Course description Course title Human Resources and Organization Course code 27166 Scientific sector SECS-P/10 Degree Bachelor in Economics and Management Semester and academic year 2nd semester
MehrSYLLABUS COURSE DESCRIPTION
SYLLABUS COURSE DESCRIPTION COURSE TITLE Distributed Systems COURSE CODE 75010 DEGREE SEMESTER YEAR ING-INF/05 Bachelor in Computer Science and Engineering 1 st Semester 2nd CREDITS 8 TOTAL LECTURING HOURS
MehrE-Mail: stefan.jaehnichen@tu-berlin.de URL: http://www.swt.tu-berlin.de/menue/studium_und_lehre/aktuelles_semester/ Modulbeschreibung
Titel des Moduls: Automotive Software Engineering Engl.: Automotive Software Engineering Verantwortlich für das Modul: Jähnichen, Stefan Modulbeschreibung LP (nach ): 9 E-Mail: stefan.jaehnichen@tu-berlin.de
MehrStanz-, Press- und Ziehteile Punched Pressed and Drawn parts
Stanz-, Press- und Ziehteile Punched Pressed and Drawn parts Produkt Portfolio. Product portfolio Automotive / Sicherheit Produktion von Sicherheitsteilen und kompletten Baugruppen (Nieten, Schweißen,
MehrSupplier Questionnaire
Supplier Questionnaire Dear madam, dear sir, We would like to add your company to our list of suppliers. Our company serves the defence industry and fills orders for replacement parts, including orders
MehrNotice: All mentioned inventors have to sign the Report of Invention (see page 3)!!!
REPORT OF INVENTION Please send a copy to An die Abteilung Technologietransfer der Universität/Hochschule An die Technologie-Lizenz-Büro (TLB) der Baden-Württembergischen Hochschulen GmbH Ettlinger Straße
MehrThe German professional Education System for the Timber Industry. The University of Applied Sciences between vocational School and University
Hochschule Rosenheim 1 P. Prof. H. Köster / Mai 2013 The German professional Education System for the Timber Industry The University of Applied Sciences between vocational School and University Prof. Heinrich
MehrIntercultural educations by Means of PArtners working with ECvet Transfer LdV (TOI): DE/10/LLP-LdV/TOI/147303
Intercultural educations by Means of PArtners working with ECvet Transfer LdV (TOI): DE/10/LLP-LdV/TOI/147303 Product 5 IMPAECT Assessment Sheet for Students IMPAECT ASSESSMENT OF LEARNING OUTCOMES NAME
MehrSheet Metal Forming BLECHBEaRBEITUNg
Sheet Metal Forming BLECHBEaRBEITUNg Company UNTERNEHmen SERVE Blechbearbeitung ist Partner für Kunden unterschiedlichster Branchen. Das fordert enorme Flexibilität. Dank einer hohen Produktionstiefe sind
MehrUNIGRAZONLINE. With UNIGRAZonline you can organise your studies at Graz University. Please go to the following link: https://online.uni-graz.
English Version 1 UNIGRAZONLINE With UNIGRAZonline you can organise your studies at Graz University. Please go to the following link: https://online.uni-graz.at You can choose between a German and an English
MehrSchool of Business. Fachhochschule Stralsund University of Applied Sciences
School of Business Fachhochschule Stralsund University of Applied Sciences Prof. D. Patrick Moore 1 /31 Personal Introduction Prof. D. Patrick Moore 2 /31 What can you expect from the next 5 10 minutes?
MehrNEWSLETTER. FileDirector Version 2.5 Novelties. Filing system designer. Filing system in WinClient
Filing system designer FileDirector Version 2.5 Novelties FileDirector offers an easy way to design the filing system in WinClient. The filing system provides an Explorer-like structure in WinClient. The
MehrAccounting course program for master students. Institute of Accounting and Auditing http://www.wiwi.hu-berlin.de/rewe
Accounting course program for master students Institute of Accounting and Auditing http://www.wiwi.hu-berlin.de/rewe 2 Accounting requires institutional knowledge... 3...but it pays: Lehman Bros. Inc.,
MehrMsc. Courses at the IST
Universitat Stuttgart Institute for Theory and Automatic Prof. Dr. Ing. Frank Allgöwer Msc. Courses at the IST In the following -grouped according to study programs- modules in Master of Science programs
MehrUniversitäres Technische Fernstudium (Dresdener Modell)
Fakultät Maschinenwesen Arbeitsgruppe Fernstudium Einsatz des Lehr- und Lernsystems ILIAS im universitären technischen Fernstudium an der TU Dresden Dr.-Ing. Angelika Körting Hamburg, 16. Juli 2010 Universitäres
MehrExercise (Part II) Anastasia Mochalova, Lehrstuhl für ABWL und Wirtschaftsinformatik, Kath. Universität Eichstätt-Ingolstadt 1
Exercise (Part II) Notes: The exercise is based on Microsoft Dynamics CRM Online. For all screenshots: Copyright Microsoft Corporation. The sign ## is you personal number to be used in all exercises. All
MehrAuslandssemester in Jyväskylä, Finnland
Auslandssemester in Jyväskylä, Finnland Jyväskylä JAMK Sommer- oder Wintersemester? Jyväskylä Stuttgart Spring semester Autumn semester Wintersemester Wi- Se Sommersemester Warum sollte ich an der JAMK
MehrISO 15504 Reference Model
Prozess Dimension von SPICE/ISO 15504 Process flow Remarks Role Documents, data, tools input, output Start Define purpose and scope Define process overview Define process details Define roles no Define
MehrExercise (Part XI) Anastasia Mochalova, Lehrstuhl für ABWL und Wirtschaftsinformatik, Kath. Universität Eichstätt-Ingolstadt 1
Exercise (Part XI) Notes: The exercise is based on Microsoft Dynamics CRM Online. For all screenshots: Copyright Microsoft Corporation. The sign ## is you personal number to be used in all exercises. All
MehrAlso known as 'Industrial placement' of 'practical placement' 2. Praxissemester Gesamt 2nd Practical semester
Wirtschaftingeneurwesen Industrial Engineering 2. Praxissemester Gesamt 2nd Practical semester 2. Praxissemester praktischer Teil 2nd Practical semester practical part Allgemeine Betriebswirtschaftslehre
MehrEnvironmental management in German institutions of higher education: Lessons learnt and steps toward sustainable management
Environmental management in German institutions of higher education: Lessons learnt and steps toward sustainable management Lüneburg, Juni 23/24, 2005 Joachim Müller Sustainable Management of Higher Education
MehrEnterprise Anwendungssysteme mit Schwerpunkt auf SCM und RFID Prozesse, Aufgaben und Methoden
Enterprise Anwendungssysteme mit Schwerpunkt auf SCM und RFID Prozesse, Aufgaben und Methoden Praxisnahe Erläuterung anhand der SAP-SCM-Lösung Dr. Alexander Zeier Lehrstuhlvertreter des Prof. Hasso-Plattner-Lehrstuhls
MehrSyllabus Course description
Syllabus Course description Course title Service Innovation Course code 27192 Scientific sector SECS-P/08 Degree Master Entrepreneurship and Innovation Semester and academic year 2nd semester, a.y. 2015-2016
MehrMesser und Lochscheiben Knives and Plates
Messer und Lochscheiben Knives and Plates Quality is the difference Seit 1920 Since 1920 Quality is the difference Lumbeck & Wolter Qualität, kontinuierlicher Service und stetige Weiterentwicklung zeichnen
MehrWays and methods to secure customer satisfaction at the example of a building subcontractor
Abstract The thesis on hand deals with customer satisfaction at the example of a building subcontractor. Due to the problems in the building branch, it is nowadays necessary to act customer oriented. Customer
MehrDear Colleague, Please give us a call and let us know how we can assist you. We look forward to talking to you soon. Thank you.
Dear Colleague, Thank you for visiting our website and downloading a product catalog from the R.M. Hoffman Company. We hope this information will be useful to you in solving the application you are working
MehrLehrangebot am Institut für Marketing für Master of Science
Univ.-Prof. Dr. Anton Meyer Institut für Marketing Lehrangebot am Institut für Marketing für Master of Science - Informationen, Vorgehen, Richtlinien Stand: August 2012 www.marketingworld.de Übersicht
MehrExercise (Part I) Anastasia Mochalova, Lehrstuhl für ABWL und Wirtschaftsinformatik, Kath. Universität Eichstätt-Ingolstadt 1
Exercise (Part I) Notes: The exercise is based on Microsoft Dynamics CRM Online. For all screenshots: Copyright Microsoft Corporation. The sign ## is you personal number to be used in all exercises. All
MehrEinsatz einer Dokumentenverwaltungslösung zur Optimierung der unternehmensübergreifenden Kommunikation
Einsatz einer Dokumentenverwaltungslösung zur Optimierung der unternehmensübergreifenden Kommunikation Eine Betrachtung im Kontext der Ausgliederung von Chrysler Daniel Rheinbay Abstract Betriebliche Informationssysteme
MehrPlanetary Screw Assembly
1 Planetary Screw Assembly (PLSA = Planetary Screw Assembly) Customer Presentation 1 Your Requirements Screw assemblies with high power density offered at market-oriented prices High load capacities, high
MehrShock pulse measurement principle
Shock pulse measurement principle a [m/s²] 4.0 3.5 3.0 Roller bearing signals in 36 khz range Natural sensor frequency = 36 khz 2.5 2.0 1.5 1.0 0.5 0.0-0.5-1.0-1.5-2.0-2.5-3.0-3.5-4.0 350 360 370 380 390
MehrIPEK. Institut für Produktentwicklung. Institut für Produktentwicklung Universität Karlsruhe (TH) Prof. A. Albers
Bead Optimization with respect to acoustical behavior - o.prof.dr.-ing.dr.h.c.a.albers Institute of Product Development University of Karlsruhe (TH) 2007 Alle Rechte beim Karlsruhe. Jede Institute of Product
MehrDATA ANALYSIS AND REPRESENTATION FOR SOFTWARE SYSTEMS
DATA ANALYSIS AND REPRESENTATION FOR SOFTWARE SYSTEMS Master Seminar Empirical Software Engineering Anuradha Ganapathi Rathnachalam Institut für Informatik Software & Systems Engineering Agenda Introduction
MehrSeminar: Software Engineering verteilter Systeme
Seminar: Software Engineering verteilter Systeme Hauptseminar im WS 2010/2011 Programmierung verteilter Systeme Institut für Informatik Universität Augsburg 86135 Augsburg Tel.: +49 821 598-2118 Fax: +49
MehrManagement Information System SuperX status quo and perspectives
Management Information System SuperX status quo and perspectives 1 Agenda 1. Business Intelligence: Basics 2. SuperX: Data Warehouse for Universities 3. Joolap: OLAP for Universities 4. Cooperative reporting
MehrAlgorithms for graph visualization
Algorithms for graph visualization Project - Orthogonal Grid Layout with Small Area W INTER SEMESTER 2013/2014 Martin No llenburg KIT Universita t des Landes Baden-Wu rttemberg und nationales Forschungszentrum
MehrLehrangebot am Institut für Marketing
Institut für Marketing Univ.-Prof. Dr. Anton Meyer Lehrangebot am Institut für Marketing für Master of Science - Informationen, Vorgehen, Richtlinien Stand: Oktober 2011 www.marketing.bwl.lmu.de Übersicht
MehrDokumentation (ISO 26514) Prof. Sissi Closs Donnerstag,, 5. November 2009
Der neue ISO-Standard Standard für f r Software- Dokumentation (ISO 26514) Prof. Sissi Closs Donnerstag,, 5. November 2009 ISO/IEC 26514 Software and systems engineering User documentation requirements
MehrCity West between Modern Age and History: How Does the Balancing Act. between Traditional Retail Structures and International
City West between Modern Age and History: How Does the Balancing Act between Traditional Retail Structures and International Competition Work? Agenda 1. Basic Data about City West 2. Kurfürstendamm 3.
MehrWie agil kann Business Analyse sein?
Wie agil kann Business Analyse sein? Chapter Meeting Michael Leber 2012-01-24 ANECON Software Design und Beratung G.m.b.H. Alser Str. 4/Hof 1 A-1090 Wien Tel.: +43 1 409 58 90 www.anecon.com office@anecon.com
MehrHanover Center for Production Technology
Hanover Center for Production Technology Science and Industrie under one roof Generating Ideas - Creating Innovations Dipl.-Ing. Jens Gue PZH GmbH An der Universität 2 30823 Garbsen Tel.: 0511 762 19434
MehrDouble Degree Programme Intake WS 2013. Dr.-Ing. Stefan Werner. Coordination and Support Programm Coordinators. Support
Programme Intake WS 2013 Dr.-Ing. Stefan Werner Coordination and Support Programm Coordinators Overall Coordination Prof. Dr.-Ing. Axel Hunger Room: BB BB318/ 379-4221 axel.hunger@uni-due.de Mech. Eng.
MehrTechnologien & Märkte Technologies & Markets
Metal concepts Metallkonzepte 02 Technologien & Märkte Technologies & Markets... Wir entwickeln und fertigen unsere Produkte komplett im eigenen Haus. Engagierte und kompetente Mitarbeiter bedienen CNC-gesteuerte
MehrELBA2 ILIAS TOOLS AS SINGLE APPLICATIONS
ELBA2 ILIAS TOOLS AS SINGLE APPLICATIONS An AAA/Switch cooperative project run by LET, ETH Zurich, and ilub, University of Bern Martin Studer, ilub, University of Bern Julia Kehl, LET, ETH Zurich 1 Contents
MehrGern beraten wir auch Sie. Sprechen Sie uns an!
de en Unter dem Motto wire Solutions bietet die KIESELSTEIN International GmbH verschiedenste Produkte, Dienstleistungen und After Sales Service rund um den Draht an. Die Verbindung von Tradition und Innovation
MehrEntwurf, Konzept- und Angebotsentwicklung auch für Nicht-CAD-Experten mit SpaceClaim und CADENAS PARTcommunity
Entwurf, Konzept- und Angebotsentwicklung auch für Nicht-CAD-Experten mit SpaceClaim und CADENAS PARTcommunity Detlev Mohr, Senior Technical Consultant Copyright 2012 Die Firma SpaceClaim Gründer Pioniere
MehrAbteilung Internationales CampusCenter
Abteilung Internationales CampusCenter Instructions for the STiNE Online Enrollment Application for Exchange Students 1. Please go to www.uni-hamburg.de/online-bewerbung and click on Bewerberaccount anlegen
MehrNeue SolidWorks Bücher in unserem Angebot Stand April 2008
Neue SolidWorks Bücher in unserem Angebot Stand April 2008 3D-Konstruktion mit SolidWorks, mit CD-ROM von Gerhard Engelken ISBN-10: 3-446-41174-7 Da das Arbeiten mit SolidWorks wegen seiner hohen Benutzerfreundlichkeit
MehrSeminar: Software Engineering verteilter Systeme
Seminar: Software Engineering verteilter Systeme Hauptseminar im Sommersemester 2011 Programmierung verteilter Systeme Institut für Informatik Universität Augsburg 86135 Augsburg Tel.: +49 821 598-2118
Mehr1 von 3 10.07.2014 12:07
1 von 3 10.07.2014 12:07 Auswertung Evaluationsfragebogen HS Fulda Fachbereich Angewandte Informatik Studiengang: Bachelor Wirtschaftsinformatik Titel der Veranstaltung: Statistik und Finanzmathematik
MehrStudieren probieren 2015
Studieren probieren 2015 Programm Wirtschaft Dienstag, 20.10.2015 BACHELOR WIRTSCHAFTSBERATUNG 9:00 11:30 Uhr Englisch I Theodore Sigurd Snydal MA/ Seminarraum 22 9:30 11:30 Uhr Finanz- & Wirtschaftsmathematik
MehrFeber 2010 Auftrag durch Herrn Direktor Winkler. März 2010 Erster Kontakt mit dem Technischen Delegierten, Herrn Ing. Stefan Praschl in Wien, IBW WKO
Feber 2010 Auftrag durch Herrn Direktor Winkler März 2010 Erster Kontakt mit dem Technischen Delegierten, Herrn Ing. Stefan Praschl in Wien, IBW WKO April 2010 Auswahl eines geeigneten Kandidaten Viktor
MehrCorporate Digital Learning, How to Get It Right. Learning Café
0 Corporate Digital Learning, How to Get It Right Learning Café Online Educa Berlin, 3 December 2015 Key Questions 1 1. 1. What is the unique proposition of digital learning? 2. 2. What is the right digital
MehrMicrosoft Azure Fundamentals MOC 10979
Microsoft Azure Fundamentals MOC 10979 In dem Kurs Microsoft Azure Fundamentals (MOC 10979) erhalten Sie praktische Anleitungen und Praxiserfahrung in der Implementierung von Microsoft Azure. Ihnen werden
MehrInnovation Management
Innovation Management 0 Preface Prof. Dr. Rolf Dornberger, Prof. Dr. Stella Gatziu Content 0 Preface 0.1 Organisational issues of the module Innovation Management 0.2 Literature 2 0.1 Organisational issues
MehrRisk-Managements for Installation, Maintenance and Reprocessing of Medical Devices
Risk-Managements for Installation, Maintenance and Reprocessing of Medical Devices Laws, Guidelines and Standards Medizinproduktegesetz (MPG) Medizinprodukte-Betreiberverordnung (MBetreibV) Sicherheitsplanverordnung
MehrOntotechnology 2013-1-BE3-LEO05-07298. http://www.adam-europe.eu/adam/project/view.htm?prj=11543
Ontotechnology 2013-1-BE3-LEO05-07298 1 Projektinformation Titel: Ontotechnology Projektnummer: 2013-1-BE3-LEO05-07298 Jahr: 2013 Projekttyp: Innovationstransfer Status: laufend Marketing Text: Ontology
MehrHochschule Esslingen. Modulbeschreibung TBB Internationale Technische Betriebswirtschaft. Inhaltsverzeichnis. Kanalstr. 33 73728 Esslingen
Kanalstr. 33 73728 Esslingen Inhaltsverzeichnis Seite 1 von 6 TBB602 MD International Business 2 Int.Marketing/-Finance & Case Studies Int.Business 3 International Conmmercial Law 5 Erläuterungen 6 Modul
MehrEuropean Qualification Strategies in Information and Communications Technology (ICT)
European Qualification Strategies in Information and Communications Technology (ICT) Towards a European (reference) ICT Skills and Qualification Framework Results and Recommendations from the Leornardo-da-Vinci-II
MehrWalter GPS Global Productivity System
Walter GPS Global Productivity System DIE WERKZEUGAUSWAHL MIT dem ÜBERRASCHUNGS- EFFEKT. ÜBERRASCHEND EINFACH. THE TOOL SELECTION WITH THE ELEMENT OF SURPRISE. SURPRISINGLY EASY. Überraschend schnell:
MehrModul Strategic Management (PGM-07)
Modul Strategic Management (PGM-07) Beschreibung u. Ziele des Moduls Dieses Modul stellt als eine der wesentlichen Formen wirtschaftlichen Denkens und Handelns den strategischen Ansatz vor. Es gibt einen
MehrURL: http://www.swt.tu-berlin.de/menue/studium_und_lehre/aktuelles_semester/ Modulbeschreibung
Titel des Moduls: Softwarequalität - Praxis Engl.: Applied Software Quality Verantwortlich für das Modul: Jähnichen, Stefan E-Mail: stefan.jaehnichen@tu-berlin.de Modulbeschreibung LP (nach ): 3 URL: http://www.swt.tu-berlin.de/menue/studium_und_lehre/aktuelles_semester/
MehrAn Introduction to Monetary Theory. Rudolf Peto
An Introduction to Monetary Theory Rudolf Peto 0 Copyright 2013 by Prof. Rudolf Peto, Bielefeld (Germany), www.peto-online.net 1 2 Preface This book is mainly a translation of the theoretical part of my
MehrModulbeschreibung. The course is principally designed to impart: technical skills 50%, method skills 40%, system skills 10%, social skills 0%.
Titel des Moduls: Parallel Systems Dt.: Parallele Systeme Verantwortlich für das Modul: Heiß, Hans-Ulrich E-Mail: lehre@kbs.tu-berlin.de URL: http://www.kbs.tu-berlin.de/ Modulnr.: 866 (Version 2) - Status:
MehrDIE SPEZIALISTEN FÜR ANSPRUCHSVOLLE KABELKONFEKTION UND BAUGRUPPEN SPECIALISTS IN SOPHISTICATED CABLE ASSEMBLIES AND MODULES
DIE SPEZIALISTEN FÜR ANSPRUCHSVOLLE KABELKONFEKTION UND BAUGRUPPEN SPECIALISTS IN SOPHISTICATED CABLE ASSEMBLIES AND MODULES IMMER DAS RICHTIGE WERKZEUG Wer gute Arbeit leisten möchte, braucht immer die
MehrDun & Bradstreet Compact Report
Dun & Bradstreet Compact Report Identification & Summary (C) 20XX D&B COPYRIGHT 20XX DUN & BRADSTREET INC. - PROVIDED UNDER CONTRACT FOR THE EXCLUSIVE USE OF SUBSCRIBER 86XXXXXX1. ATTN: Example LTD Identification
MehrNeue SolidWorks Bücher in unserem Angebot Stand April 2008
Neue SolidWorks Bücher in unserem Angebot Stand April 2008 SolidWorks bedankt sich bei der COMSOL GmbH, einem SolidWorks Preferred Educational Reseller, für das Bereitstellen der Bücherliste in unserem
MehrSoftware development with continuous integration
Software development with continuous integration (FESG/MPIfR) ettl@fs.wettzell.de (FESG) neidhardt@fs.wettzell.de 1 A critical view on scientific software Tendency to become complex and unstructured Highly
Mehr15. - 16.06.2015 SWISSHOTEL DRESDEN AM SCHLOSS
10 Jahre CIDEON Software Anwendertreffen CIDEON SOFTWARE ANWENDERTREFFEN / USER GROUP MEETING CIDEON SOFTWARE GMBH & CO. KG 19. - 20.05.2014 ANWENDERTREFFEN USER GROUP MEETING SWISSHOTEL DRESDEN AM SCHLOSS
MehrMitglied der Leibniz-Gemeinschaft
Methods of research into dictionary use: online questionnaires Annette Klosa (Institut für Deutsche Sprache, Mannheim) 5. Arbeitstreffen Netzwerk Internetlexikografie, Leiden, 25./26. März 2013 Content
MehrProduct Lifecycle Manager
Product Lifecycle Manager ATLAS9000 GmbH Landauer Str. - 1 D-68766 Hockenheim +49(0)6205 / 202730 Product Lifecycle Management ATLAS PLM is powerful, economical and based on standard technologies. Directory
MehrWillkommen zum neuen Semester!
Willkommen zum neuen Semester! Informationsmanagement und Informationstechnologie (IMIT) und Wirtschaftsinformatik (Winf) Wintersemester 2012/13 1 Informationen (1) Belegung von Mastermodulen im Bachelor
MehrTMF projects on IT infrastructure for clinical research
Welcome! TMF projects on IT infrastructure for clinical research R. Speer Telematikplattform für Medizinische Forschungsnetze (TMF) e.v. Berlin Telematikplattform für Medizinische Forschungsnetze (TMF)
Mehrinfrastructure definitions example versioning
infrastructure definitions example versioning ATLAS9000 GmbH Landauer Str. - 1 D-68766 Hockenheim +49(0)6205 / 202730 Infrastructure documents Storage ATLAS PLM Archives Drawing Circuit Diagram Work Plan
MehrBILDUNGSANGEBOTE FÜR UNTERNEHMEN CAD-LEHRGÄNGE
BILDUNGSANGEBOTE FÜR UNTERNEHMEN CAD-LEHRGÄNGE Praxisnahe Bildungsangebote Für Auszubildende und Mitarbeiter von Unternehmen bietet das Berufsbildungswerk Dresden verschiedene Ausbildungsmodule im gewerblich-technischen
Mehrp^db=`oj===pìééçêíáåñçêã~íáçå=
p^db=`oj===pìééçêíáåñçêã~íáçå= Error: "Could not connect to the SQL Server Instance" or "Failed to open a connection to the database." When you attempt to launch ACT! by Sage or ACT by Sage Premium for
MehrHow far can you imagine?
How far can you imagine? www.dmrc.de Dr. Eric Klemp - 03.12.2013 1 Möglichkeiten und Chancen additiver Fertigungsverfahren Dr.-Ing. Eric Klemp FORUM ZUKUNFTSVISION 3D-DRUCK Dr. Eric Klemp - 03.12.2013
MehrLehrstuhl für Allgemeine BWL Strategisches und Internationales Management Prof. Dr. Mike Geppert Carl-Zeiß-Str. 3 07743 Jena
Lehrstuhl für Allgemeine BWL Strategisches und Internationales Management Prof. Dr. Mike Geppert Carl-Zeiß-Str. 3 07743 Jena http://www.im.uni-jena.de Contents I. Learning Objectives II. III. IV. Recap
MehrANLAGENANALYSE PLANT ANALYSIS
ANLAGENANALYSE PLANT ANALYSIS ANLAGENANALYSE PLANT ANALYSIS Ein Anlagenstillstand ist meistens mit einem enormen Kostenund Zeitaufwand verbunden. Bis die Fehlerquelle gefunden und das Austauschgerät organisiert
MehrUniversity of Tirana
University of Tirana Address: Sheshi Nënë Tereza ; www.unitir.edu.al Tel: 04228402; Fax: 04223981 H.-D. Wenzel, Lehrstuhl Finanzwissenschaft, OFU Bamberg 1 University of Tirana The University of Tirana
MehrCleanroom Fog Generators Volcano VP 12 + VP 18
Cleanroom Fog Generators Volcano VP 12 + VP 18 Description & Functional Principle (Piezo Technology) Cleanrooms are dynamic systems. People and goods are constantly in motion. Further installations, production
MehrWaldwissen.net (Forest-knowledge.net)
Waldwissen.net (Forest-knowledge.net) Conference of Directors of State Forest Research Institutes, Vienna, July 5-6th 2004 project idea Establish an internet-based, scientifically sound, comprehensive
MehrLogin data for HAW Mailer, Emil und Helios
Login data for HAW Mailer, Emil und Helios Es gibt an der HAW Hamburg seit einiger Zeit sehr gute Online Systeme für die Studenten. Jeder Student erhält zu Beginn des Studiums einen Account für alle Online
MehrAuswertungsbericht Ihrer Lehrveranstaltung
HafenCity Universität Hamburg Hebebrandstraße 97 Hamburg Evaluationsbüro Prof. Dr. Gernot Grabher (PERSÖNLICH) Auswertungsbericht Ihrer Lehrveranstaltung Sehr geehrter Herr Prof. Dr. Grabher, anbei erhalten
MehrEnergieeffizienz und Erneuerbare Energien Programme der EZ -- ein Zwischenstand
Energieeffizienz und Erneuerbare Energien Programme der EZ -- ein Zwischenstand Climate Policy Capacity Building Seminar Kiew 07.10.04 Klaus Gihr Senior Project Manager Europe Department Was sind unsere
MehrImplementing a Data Warehouse with Microsoft SQL Server MOC 20463
Implementing a Data Warehouse with Microsoft SQL Server MOC 20463 In dem Kurs Implementing a Data Warehouse with Microsoft SQL Server lernen Sie, wie Sie eine Data-Warehouse-Plattform implementieren, um
MehrAPT Automation AUTOMATION UND INNOVATION AUTOMATION AND INNOVATION
APT Automation APT Automation Die APT Automation ist spezialisiert auf anspruchsvolle Systemlösungen auf den Gebieten der Automatisierung und Produktionstechnik. Zu unseren Kernkompetenzen gehören Speziallösungen
Mehr15. - 16.06.2015 SWISSHOTEL DRESDEN AM SCHLOSS
10 Jahre CIDEON Software Anwendertreffen CIDEON SOFTWARE ANWENDERTREFFEN / USER GROUP MEETING CIDEON SOFTWARE GMBH & CO. KG 19. - 20.05.2014 ANWENDERTREFFEN USER GROUP MEETING SWISSHOTEL DRESDEN AM SCHLOSS
MehrLeitfaden für die Erstellung eines individuellen Stundenplans mit UnivIS/ How to make up your individual timetable with UnivIS
Leitfaden für die Erstellung eines individuellen Stundenplans mit UnivIS/ How to make up your individual timetable with UnivIS Liebe Austauschstudierende, ab dem Wintersemester (WiSe) 2014/15 finden Sie
MehrDie Steuerungs und Antriebskonzepte zeichnen sich durch deutliche Vorteile aus.
Die Steuerungs und Antriebskonzepte zeichnen sich durch deutliche Vorteile aus. This concept offers different advantages: SCHRÖDER POS3000-3D GRAPHIC CONTROLLER DIE ZUKUNFT IM SCHWENKBIEGEN THE FUTURE
MehrChallenges for the future between extern and intern evaluation
Evaluation of schools in switzerland Challenges for the future between extern and intern evaluation Michael Frais Schulentwicklung in the Kanton Zürich between internal evaluation and external evaluation
Mehr