Lichtstative. 231 Showtec

Größe: px

Ab Seite anzeigen:

Download "Lichtstative. 231 Showtec"

Leander Lorenz
vor 6 Jahren
Abrufe

1 Lichtstative 231 Showtec

2 Two-Stands with truss Light & Show Showtec Two Stand with Truss ORDERCODE m. Showtec Extra truss part ORDERCODE ,5 m. Max. load: 50 kg 25 kg Showtec Two Stand with Truss and Two extra T-Bars ORDERCODE m. Showtec Extra truss part ORDERCODE ,5 m Max. load: 50 kg Own weight: 27 kg 532 Showtec Lighting-Stands Two-Stands with truss

Light & Show Two-Stands with truss Showtec Two Stand with metal decotruss ORDERCODE 70149 Adjustable height: 170-300cm Width: 600cm Maximum

3 Light & Show Two-Stands with truss Showtec Two Stand with metal decotruss ORDERCODE Adjustable height: cm Width: 600cm Maximum Load: 30kg point load / 60 kg distributed load Showtec Extra truss part ORDERCODE ,5 m. Two-Stands with truss Lighting-Stands 533 Showtec

4 Metal stands Light & Show LS-35 Lighting stand Metal stand black with T-bar Metal Medium Stand Tripod stand MKII incl. T-bar ORDERCODE Max. load 60 Kg, max. height 3,5m, Black ORDERCODE ,02-2,20m / 15 kg ORDERCODE ,70-3,65m / 15 kg ORDERCODE Steel lighting stand Polished 1,46-2,62m / 40 kg : Height: cm. Net. weight: 12 Kg. Load capacity: 60 Kg. Max. height: 3,46m. Leg length: 1,47m. Max. distance between legs: 1,62m : Maximum load: 15 kg. Maximum height: 220 cm. Minimum height: 102 cm. Own weight: 2 kg : Maximum load: 15 kg Maximum height: 365 cm. Minimum height: 170 cm. Own weight: 6 kg : Maximum load: 40 kg. Maximum height: 262 cm. Minimum height: 146 cm. Own weight: 10 kg. 534 Showtec Lighting-Stands Metal stands

5 Light & Show Stands with T-bars Alu Stand 4 m. double T-Bar Alu Stand 3,5 m. double T-Bar Alu Stand 4 m. incl. T-Bar Alu Stand 4 m. incl. T-Bar ORDERCODE max 25 kg, Silver ORDERCODE Black ORDERCODE max 30 kg, Polished ORDERCODE max 30 kg, Black : Max. load: 25 kg Own weight: 6,2 kg : Max. load: 30 kg Own weight: 9 kg : Max. load: 30 kg Own weight: 9,8 kg - polished : Max. load: 30 kg Own weight: 10,74 kg Stands with T-bars Lighting-Stands 535 Showtec

Followspot-stands Light & Show Followspotstand Wind-Up ORDERCODE 70138 1-1,55m / 30 kg Followspotstand ORDERCODE 70139 1,25-2,15m / 15 kg Professional

Diameter: Ø30mm Minimum height: 109cm Maximum height: 147cm Maximum load: 40 Kg 110cm 8,7 Kg Insertion diameter: 28mm (standard TV spigot) 70138 : Maximal

6 Followspot-stands Light & Show Followspotstand Wind-Up ORDERCODE ,55m / 30 kg Followspotstand ORDERCODE ,25-2,15m / 15 kg Professional Followspotstand ORDERCODE ,09-1,47m / 40 kg : Follow spot stand. 1 riser, 2 sections. Tube diameter: 50mm, 32mm Leg. Diameter: Ø30mm Minimum height: 109cm Maximum height: 147cm Maximum load: 40 Kg 110cm 8,7 Kg Insertion diameter: 28mm (standard TV spigot) : Maximal load: 30 kg Maximal height: 155 cm Minimal height: 100 cm 12 kg : Maximal load: 15 kg Maximal height: 215 cm Minimal height: 125 cm 6 kg 536 Showtec Lighting-Stands Followspot-stands

7 Light & Show Wind-up stands Wind-Up Lightstand ORDERCODE ,81-3,80m / 30 kg Showtec Wind-Up Lightstand 4 m. ORDERCODE with winch spigot adapter. 1,6-3,1m / 18,5 kg Three section, chrome plated steel stand with geared column. 3 sections. Tube diameters 55, 45, 38mm. 2 risers extend simultaneously at one elevation of 4,4cm per handle turn. Chrombeschichtetes Stahlstativ mit drei Segmenten. Rohrdurchmesser 55, 45 und 38 mm. 2 Gewindeschrauben verlängern gleichzeitig auf eine Höhe von 4,4 cm pro Umdrehung. ORDERCODE : Maximal load: 18,5 kg Maximal height: 310 cm Minimal height: 160 cm : Maximal load: 18,5 kg Maximal height: 310 cm Minimal height: 160 cm with winch and T-bar 1,6-3,1m / 18,5 kg : Leg. Diameter: Ø30 mm Minimum height: 181 cm. Maximum height: 380 cm Maximum load: 30 kg 128 cm 22,4 kg Insertion diameter: 28 mm (standard TV spigot) Wind-up stands Lighting-Stands 537 Showtec

Standadapters Light & Show Showtec Elevator Towers Showtec Elevator Towers are manufactured to lift loads vertically.

The entire mobile system is fi xed via security catches, essential during the tower effort. Automatic break winch according to the standard VBG 8/10.93 and certifi cate TÜV 9591009.

It also has a water level, for vertical adjustment. The entire set is covered by electrolytic zinc in order to protect it against corrosion and oxidation.

8 Standadapters Light & Show Showtec Elevator Towers Showtec Elevator Towers are manufactured to lift loads vertically.the telescopic system is composed of three steel profi les handled through a steel cable of high resistance to the traction, guided by pulleys provided by self-lubricant ball bearings. The entire mobile system is fi xed via security catches, essential during the tower effort. Automatic break winch according to the standard VBG 8/10.93 and certifi cate TÜV The leg ends are adjustable in height. At the end of the legs are stabilizers, in order to make it easy to install the tower on every kind of ground. It also has a water level, for vertical adjustment. The entire set is covered by electrolytic zinc in order to protect it against corrosion and oxidation. Die neuen Elevator Tower von Showtec wurden zum vertikalen Hochziehen von Lasten entwickelt. Das Teleskopsystem besteht aus drei Stahlprofi len, die durch ein widerstandsfähiges Stahlkabel gehalten werden, das durch Rollen bzw. Kugellager geführt wird. Das bewegliche System wird durch Sicherheitsklemmen justiert, das ist während des Aufrichtens besonders wichtig. Ausserdem verfügen die Elevator Towers über eine automatische Kurbelbremse, die dem Standard VBG 8/10.93 entspricht und TÜV-zertifi ziert ist (TÜV ). Die Teleskopbeine haben höhenverstellbare, schockabsorbierende Füße - dies ermöglicht eine stabile Aufstellung, egal auf welcher Oberfl äche die ElevatorTowers stehen. Das Produkt verfügt zusatzlich über eine Wasserwaagenanzeige, um es vertikal zu justieren. Die Oberfl äche des Sets ist so versiegelt, dass sie gegen Korrosion bzw. Oxidation geschützt ist. Showtec LS-100 ORDERCODE Max. load 100 Kg, max. height 5m : Maximum vertical load: 100 Kg Minimum vertical load: 25 Kg Insertion diameter: 35mm Maximum Height: 5m Minimum Height: 1,89m Number of sections: 3 2x2m 40 Kg Showtec LS-150 ORDERCODE Max. load 150 Kg, max. height 5,3m : Maximum vertical load: 150 Kg Minimum vertical load: 25 Kg Insertion diameter: 35mm Maximum Height: 5,3m Minimum Height: 1,72m Number of sections: 4 2x2m 45 Kg Showtec Stand Adapter ORDERCODE Showtec Stand Adapter ORDERCODE Showtec Stand Adapter ORDERCODE Showtec Stand Adapter ORDERCODE Top: Topmountingscrew Bottom: 38-35mm Top: Entry for 28mm. TV Spigot Bottom: 38mm Top: Entry for 28mm. TV Spigot Bottom: 35mm Top: Entry for 28mm. TV Spigot Bottom: 32mm 538 Showtec Lighting-Stands Standadapters

Light & Show Wind-up stands Showtec LS-200 ORDERCODE 70182 Max. load 220 Kg, max.

55mm Maximum Height: 5,3m Minimum Height: 1,75m Number of sections: 4 2x2m 90 Kg Showtec LS-210

height 6,5m 70183 : Maximum vertical load: 220 Kg Minimum vertical load: 25 Kg Insertion diameter:

ORDERCODE 70176 This adapter turns your stand into a stand for use with standard TV-spigots in order

Dieser Adapter macht aus einem normalen Stativ ein Stativ für die Verwendung von Standard-TV-

9 Light & Show Wind-up stands Showtec LS-200 ORDERCODE Max. load 220 Kg, max. height 5,3m : Maximum vertical load: 220 Kg Minimum vertical load: 25 Kg Insertion diameter: 55mm Maximum Height: 5,3m Minimum Height: 1,75m Number of sections: 4 2x2m 90 Kg Showtec LS-210 ORDERCODE Max. load 220 Kg, max. height 6,5m : Maximum vertical load: 220 Kg Minimum vertical load: 25 Kg Insertion diameter: 40mm Maximum Height: 6,5m Minimum Height: 1,84m Number of sections: 5 2x2m 99 Kg Showtec Adapter ORDERCODE This adapter turns your stand into a stand for use with standard TV-spigots in order to make more fl exible, professional and stable rigging. Dieser Adapter macht aus einem normalen Stativ ein Stativ für die Verwendung von Standard-TV- Spigots, um eine fl exiblere und stabilere Montage zu ermöglichen. Der Adapter paßt auf Stative mit einem Durchmesser von 35mm oder 38mm. The adapter fi ts on stands with a tube diameter of 35 or 38mm Wind-up stands Lighting-Stands 539 Showtec

Ähnliche Dokumente

FR777 Differenzial-Kulissenauszug Bodenmontage, 200 kg Tragkraft, mit Gegenführung

FR777 Differenzial-Kulissenauszug Bodenmontage, 200 kg Tragkraft, mit Gegenführung http://www.fulterer.com http://www.fultererusa.com Instructions F777 Differenzial-Kulissenauszug Bodenmontage, 00 kg Tragkraft, mit Gegenführung F777 Progressive-Action Pantry Pull-out, Bottom Mount 450