Tour-Cyc 540 RGBW Zoom

Ähnliche Dokumente
Tour-Cyc 540 RGBW Bedienungsanleitung User Manual

TourBlinder 100 DTR Bedienungsanleitung User Manual

Tour-PAR COB 200 Bedienungsanleitung User Manual

Tour-PAR COB 200. Bedienungsanleitung User Manual. Art.Nr.: led Bedienungsanleitung bitte aufbewahren Keep this Manual for later queries

Bedienungsanleitung. User Manual

SETUP TOOL. Bedienungsanleitung User s Manual

Tour-LED 50 XCR Bedienungsanleitung User Manual

Bedienungsanleitung. User Manual. FLAT PAR TRI 5x3W TRI, IR Remote LIG

Bedienungsanleitung. User Manual

Bedienungsanleitung. User Manual

Tour-LED Power 56 Zoom MK II

Bedienungsanleitung. User Manual

Bedienungsanleitung. User Manual

TourLED 21 CM MKII. Bedienungsanleitung Bedienungsanleitung bitte aufbewahren. 1 Allgemeine Produktinformationen 1.1 Technische Daten LED MODULE

Bedienungsanleitung / Manual : LED-Nixie

Die beiliegenden Bedienhinweise für Expolite Geräte sind Bestandteil dieser Bedienungsanleitung. Lesen Sie diese sorgfältig, bevor

EXPOLITE Tour Cyc 540

ELW MC3 Zoom CM+W Bedienungsanleitung User Manual

Monitor VIS 3xx Kurzanleitung

Tube Analyzer LogViewer 2.3

Dexatek's Alexa Smart Home Skills Instruction Guide

Bedienungsanleitung / User Manual. PAR 56 RGB LED PAR 64 RGB LED (183x10mm LED s) mit 5 DMX Kanälen/ with 5 DMX channles

MBNLED Wheel Control RGB DMX. User Manual Bedienungsanleitung

Bedienungsanleitung / User Manual. PAR 36 RGB LED MKII PAR 56 RGB LED MKII PAR 64 RGB LED MKII PAR 64 RGB LED 24x1W

EINBAUHINWEISE INSTALLATION INSTRUCTIONS

DMX Protokoll DMX Chart. Version 1.4

TOUCH CONTROL GLASS RGB DMX

Overview thermostat/ temperature controller

Laser LightmaXX CLUB 2.0 / 4.0 SERIES

DATENBLATT / DATASHEET

IR RECEIVER Bedienungsanleitung User s Manual

RGB DMX POWER SUPPLY. Bedienungsanleitung Version 06 September 2007

SpectraDim64 für software version: V2.6 Herausgegeben: April V1.0 - Rev A

Quick Guide Home Network Mode

Produktdatenblatt. Artikel Nr.: Wand- / Deckenleuchte, LED Panel RGB, Weiß, 24V DC, 36,00 W, RGB. Technische Daten.

PeakTech Zeitprogramm erstellen über Excel - Beispiel / Timed programs with Excel Example

PROFIBUS-DP Repeater 1 to 1 and 1 to 5 with optional level converter module

DEUTSCH TOURLED MC60 BEDIENUNGSANLEITUNG FÜR LED25100 TOURLED MC60 USER MANUAL FOR LED25100

Bedienungsanleitung Manual

EINBAUHINWEISE INSTALLATION INSTRUCTIONS

yasxtouch Firmware Update

Cameraserver mini. commissioning. Ihre Vision ist unsere Aufgabe

TourLED 21 CM MKII. Bedienungsanleitung. Teichweg Lotte/Wersen. IP20 und IP66. Artikelnummer: TourLED 21 CM MKII IP20: led22075

TourStick Power CM+W. Bedienungsanleitung. Teichweg Lotte/Wersen. Schutzklasse: IP66. Artikelnummer: led22550.

Application Note. Import Jinx! Scenes into the DMX-Configurator

Montageanleitung. DUO / RGB DUO / RGB RECEIVER SLIM CLIP

Newest Generation of the BS2 Corrosion/Warning and Measurement System

Hinweisblatt. Für den Einsatz des MAX! Heizungssteuerungssystems haben Sie zwei Alternativen: Die MAX! Einzelraumlösung und die MAX! Hauslösung.

Android APP NVR Viewer

Installation/setup notes

TourLED 42 CM MKII. Bedienungsanleitung 5 APPENDIX 5.1 PARTS DIAGRAM. IP20: led22309 IP67: led22308 ITEM ITEM. Display PCB. Front cover.

Installation und Einrichtung unter Windows 7/8/10. Installation and configuration for Windows 7/8/10

APPMODULE A:SMB DOCUMENTATION. v Alto HiFi AG Gublenstrasse 1 CH-8733 Eschenbach tel +41 (0)

Released energy meters for PIKO IQ / PLENTICORE plus

EL-21SY. 2 in, 1 out v1.3 HDMI Switcher OPERATION MANUAL

Zusatz zur Betriebsanleitung Addendum to the Operating Instructions

Hazards and measures against hazards by implementation of safe pneumatic circuits

Quick Installation Guide

Information about CONFIG command in Firmware New commands for selecting and modifying operation parameters

KNX Dimm-Sequenzaktor current C KNX Dimm-Sequenzaktor V DC S-24903

Benutzerhandbuch / User s Manual RUPS 2000 / -B1

Walter Buchmayr Ges.m.b.H.

FEBE Die Frontend-Backend-Lösung für Excel

X-DIMMER-3 HP. Eingangsstrom... 6,5A max. (Externe Strombegrenzung durch Netzteil wird empfohlen) Ausgänge... 3

RSX400 KONSOLE DEUTSCH

mobilcom-debitel SmartHome Schnell-Start-Anleitung Quick Start Guide

Bedienungsanleitung. Digitale T-Bar T-4

Produktdatenblatt. Artikel Nr.: Technische Daten. Charakteristik. Elektrische Daten. Lichttechnische Eigenschaften

INDEX. 3. Package Contents Connection and Operation...4

Word-CRM-Upload-Button. User manual

LevelOne. Quick Installation Guide. EAP series Enterprise Access Point. Default Settings. IP Address

Produktdatenblatt. Artikel Nr.: LED Panel RGBW, Weiß, 24V DC, 55,00 W, RGB + Neutralweiß. perfekt geeignet für Einlegerasterleuchten

Produktdatenblatt. Artikel Nr.: Deckeneinbauring, Mizar I, Weiß-matt, 12V AC/DC, 1x max. 35,00 W. Technische Daten.

Kurzanleitung / Quick Start Manual

CONTROLLER RECEIVER REPEATER PAIRING SLIM CLIP

Bedienungsanleitung / Manual für il-debug_i Interface für den Debugger il_debug

Produktdatenblatt. Artikel Nr.: Deckeneinbauring, Weiß, 12V AC/DC, 1x max. 50,00 W. Technische Daten. Charakteristik.

Produktdatenblatt. Artikel Nr.: Wand- / Deckenleuchte, LED Panel RGB, Weiß, 24V DC, 38,00 W, RGB. Technische Daten.

Technische Information

Description of the PHOTOSONICS 4B - 35mm Highspeed Camera

LED OutdoorBar AT3 DMX

TravelPilot 55/65 Active Connect. Bluetooth TELEFONMENÜ /TELEPHONE MENU

Softwareupdate-Anleitung // Porty L 600 / Porty L 1200

Datenblatt. Remote-I/O - u-remote UR20-4AO-UI or 4-wire connection; 16-bit resolution; 4 outputs

Digital Inclinometer. Elektronischer Neigungmesser. Bedienungsanleitung

Table of Cont 6. 2 General Information... 4 Purpose...4 Documentation...4 Scope of Supply...5 Technical Data Safety Regulations...

Artikelnummer / Part No.: 42spg007 42spg007-0

Power supply Interference suppressed acc. to DIN EN /- 4, EN 55011, EN CI. B, power factor corrected Power factor BöSha LED driver

Der Xpress ist ein drahtloser Lichtschalter und eine Fernbedienung

Freigegebene Energiezähler für PIKO IQ / PLENTICORE plus Released energy meters for PIKO IQ / PLENTICORE plus

USB -> Seriell Adapterkabel Benutzerhandbuch

Freigegebene Energiezähler für PIKO IQ / PLENTICORE plus Released energy meters for PIKO IQ / PLENTICORE plus

Installation Guide WLAN Interface

UCON UCON Kurzanleitung Inbetriebnahme

User Guide Agile Scorecard

1. General information Login Home Current applications... 3

Transkript:

Tour-Cyc 540 RGBW Bedienungsanleitung User Manual Art.Nr.: led475 Eigenschaften Bedienelemente Steuerung Bedienungsanleitung bitte aufbewahren Keep this Manual for later queries Specifications Menu Control Änderungen sind ohne Ankündigung möglich. Changes are possible without prior notice. Rev. 08-8-

Die beiliegenden Bedienhinweise für Expolite Geräte sind Bestandteil dieser Bedienungsanleitung. Lesen Sie diese sorgfältig, bevor Sie das Gerät in Betrieb nehmen. The enclosed General Information for Expolite Units are part of these user manual. Read them carefully before operating the device. by FOCON SHOWTECHNIC Vertriebsgesellschaft mbh Teichweg 4+6 D-49504 Lotte/Wersen Telefon: ++49 (0) 54-77095-0 Fax: ++49 (0) 54-77095-7 info@focon-showtechnic.com www.focon-showtechnic.com

Inhalt - Content DE ENG Inhalt - Content Lieferumfang Technische Daten Abmessungen Installation Bedienung Steuerung mit DMX5 Delivery Product Information Dimensions Installation Operation Using DMX5 Controler Seite / Page D-04 D-05 D-06 D-07 D-08 D-4 E-4 E-5 E-6 E-7 E-8 E-4

Lieferumfang - Expolite Tour-CYC 540 RGBW - Anschlusskabel für Spannungsversorgung - Omega Bügel - Bedienhinweise für Expolite Geräte - Bedienungsanleitung Expolite Geräte werden vor dem Versand sorgfältig geprüft. Sollte der Lieferumfang dennoch nicht vollständig sein, wenden Sie sich bitte umgehend an Ihren Vertriebspartner. D-04

Technische Daten Spannungsversorgung 00V - 40V AC 50/60Hz Maximale Leistungsaufnahme 500W Abmessungen x 6 x 509mm Gewicht 5,0kg Anschlüsse Power In/Out DMX In/Out Betriebstemperatur -0 C - 40 C Luftfeuchtigkeit* < 80% Schutzklasse IP 65 Gehäuse Aluminiumdruckguss Gehäuse LEDs 6x 5W RGBW** + 7x 0,W RGB LED Treiberstrom A Abstrahlwinkel 7-58 Steuerung Stand-Alone / DMX5 / WDMX / RDM DMX-Kanäle - 7 (/4/4/5/5/0//7) * Siehe Allgemeine Bedienhinweise für Expolite Geräte - Hinweise zu Kondenswasserbildung im Geräteinneren. ** Toleranzbereich der Farbtemperatur entsprechend Herstellerangabe +/- 0%. 0.5 0. 0.47 0.6 Diameter M ) 0.79 0.90 5.0 6.50 0 4 0 6 46 8 8 0 5 0 Lux center.60 Distance M ) Beam Opening 4.5 Beam Opening.0 4 6 Diameter M ) 6000 4 9000 6 4000 8 50 0 440 4 Distance M ) Lux center D-05

Abmessungen D-06

Installation Montage Hängend Das Gerät kann an den mitgelieferten Quicklock Montagebügeln hängend montiert werden. Geräte müssen entsprechend der jeweils gültigen Vorschriften sicher montiert und mit einer zweiten Sicherung gegen herabfallenversehen werden. Hierzu ist am Gerät eine Öse für Safeties angebracht. Stehend Das Gerät kann direkt auf dem Basement stehend betrieben werden. Eine sichere und ausreichend rutschhemmende Standfläche ist sicherzustellen! HINWEIS Das LED Modul kann in jeder beliebigen Lage betrieben werden. DMX-Verbindung Die Geräte mit geeigneten DMX-Kabeln miteinander und mit dem Kontroller verbinden. Die vorgesehenen DMX-Adressen und Personalities an den Geräten einstellen. DMX Addr. DMX Addr.(Nx)+ DMX Addr.(Nx)+... DMX5 CONTROLLER D-07

Bedienung Bedienelemente am Gerät MENU - Taste: Eine Menüebene aufwärts ENTER-Taste: In gewähltes Menü springen; Eingabe bestätigen Aufwärts blättern; Wert erhöhen UP-Taste: DOWN-Taste Abwärts blättern; Wert verringern MENU ENTER UP DOWN Menüstruktur MENU DMX Address MODE Set DMX Address DMX Signal Select 00-5 DMX Wireless DMX DMX Mode DMX Ch DMX 4Ch DMX 4Ch DMX 5Ch DMX5Ch DMX0Ch DMXCh DMX7Ch Slave Slave Auto Auto Fading 0-55 Auto Jumping 0-55 Dimmer 0-55 Strobe 0-55 0-55 0-55 0-55 0-55 Rainbow Effect 0-55 Auto 0-55 Auto Speed 0-55 Auto Fade 0-55 0-55 Ground Dimmer 0-55 Ground Strobe 0-55 Ground 0-55 Ground 0-55 Ground 0-55 Static Color Macro Amber Yellow Warm Yellow Turquois Cyan Lavender Mauve Magenta Pink Warm Cold Settings Settings Display Rev ON OFF Display ON OFF DMX Fail Hold Blackout Dimmer Curve Linear Exp Log S-Curve Dimmer Response LED Halogen D-08

MENU Settings 0-55 0-55 0-55 0-55 Calibrate 0-55 Fan Set Auto Wireless DMX Reset Wireless DMX Memory TEST ALL Balance High YES NO Beam LED Ground LED Factory Reset Yes Keylock ON Firmware Software Version Vxxx No OFF System Info Temperature LED Temp xxxc Temp Unit Fahrenheit Power on XXX (Hours) Last Run Hrs XXX (Hours) Celsius Time Info D-09

DMX-Adresse einstellen MENU DMX Address Set DMX Address 00-5 Im Menü wird im Punkt DMX Address, Untermenü Set DMX Address die DMX-Startadresse des Gerätes eingestellt. Diese bleibt auch bei dem Wechsel der Personality erhalten. DMX-Ansteuerung einstellen MENU MODE DMX Signal Select DMX Wireless DMX Im Menü MODE wird im Untermenü DMX Signal Select eingestellt, ob das Gerät über ein DMX-Kabel (DMX) oder per Wireless DMX angesteuert werden soll. DMX-Kanalbelegung einstellen MENU MODE DMX Mode DMX Ch DMX 4Ch DMX 4Ch DMX 5Ch DMX5Ch DMX0Ch DMXCh DMX7Ch Im Menü MODE, Untermenü DMX Mode wird die Belegung der DMX-Kanäle des Gerätes festgelegt. Es stehen die Modi DMXCh, DMX4Ch, DMX4Ch, DMX5Ch, DMX5Ch, DMX0Ch, DMXCh und DMX7Ch zur Verfügung. Slave-Mode aktivieren MENU MODE Slave Slave Im Menü Mode, Untermenü Slave wird der Slave-Modus des Gerätes aktiviert. In diesem Modus kann der Scheinwerfer von einem Master-Gerät des selben Typs ferngesteuert werden. D-0

Stand-Alone Möglichkeiten MENU MODE Auto Static Color Macro Auto Fading 0-55 Auto Jumping 0-55 Dimmer 0-55 Strobe 0-55 0-55 0-55 0-55 0-55 Rainbow Effect 0-55 Auto 0-55 Auto Speed 0-55 Auto Fade 0-55 0-55 Ground Dimmer 0-55 Ground Strobe 0-55 Ground 0-55 Ground 0-55 Ground 0-55 Amber Yellow Warm Yellow Turquois Cyan Lavender Mauve Magenta Pink Warm Cold Der Tour-Cyc 540 RGBW bietet drei verschiedene Möglichkeiten der Stand-Alone Nutzung: Auto: Im Untermenü Auto können zwei im Gerät gespeicherte automatische Abläufe ausgewählt werden. Unter Auto Fading blendet das Gerät weich zwischen den einzelnen Schritten über, unter Auto Jumping springt das Gerät von Schritt zu Schritt, ohne überzublenden. Für beide Programme kann die Geschwindigkeit angepasst werden (0-55) Static: Im Untermenü Static kann eine statische Szene für den Stand-Alone Betrieb eingestellt werden. Diese wird anhand der DMX-Werteskala 5 für Dimmer, Strobe, Rot (), Grün (), Blau (), Weiß (), Regenbogen-Effekt (Rainbow Effect), Automatik-Programmen (Auto), Geschwindigkeit (Auto Speed), und automatische Überblendung (Auto Fade), sowie den Parametern für die Hintergrundbeleuchtung (Ground Dimmer, Ground Strobe, Ground, Ground, Ground ), eingestellt. Color Macro: Im Untermenü Color Macro können 5 voreingestellte Farbmakros abgerufen werden. D-

Verschiedene Einstellungen MENU Settings Settings Display Rev ON OFF Display ON OFF DMX Fail Hold Blackout Dimmer Curve Linear Exp Log S-Curve Dimmer Response LED Halogen 0-55 0-55 0-55 0-55 Calibrate 0-55 Fan Set Auto Wireless DMX Reset Wireless DMX Memory TEST ON Balance High YES NO OFF Factory Reset Yes Keylock ON No OFF Display Rev: dreht die Darstellung im Display um 80. Dies wird zum Beispiel benötigt, falls das Gerät kopfüber hängt. Display: Im Untermenü Display kann die Beleuchtung des Displays wahlweise auf automatisches Abschalten nach ca. einer Minute Inaktivität (OFF), oder generellen Betrieb (On) gestellt werden. DMX Fail: stellt das Verhalten bei Unterbrechung des DMX-Signals ein. HOLD um den letzten empfangenen Wert zu halten, oder Blackout für Blackout. Dimmer Curve: Im Untermenü Dimmer Curve können verschiedene Dimmerkurven (siehe Abbildung unten) gewählt werden. In diesem Fall wird ein Delay im Dimmer aktiviert. Linear Exp Log S-Curve Dimmer Response: Im Untermenü Dimmer Response kann eingestellt werden, ob der Dimmer der LED abrupt auf Änderungen reagiert (LED), oder sich wie ein Halogen-Leuchtmittel verhält (Halogen). Balance: Im Untermenü Balance wird der Weißwert für die Eingabe der maximalen DMX-Werte eingestellt. Wenn diese Kalibrierung aktiviert ist und das Gerät die DMX-Werte RGBW = 55, 55, 55, 55 empfängt, wird das hier hinterlegte Weiß ausgegeben. HINWEIS: Der Maximalwert kann auf 0" begrenzt werden. In diesem Fall reagiert ein Farbkanal nicht auf einen gesendeten DMX-Wert. Dies kann als Gerätefehler fehlinterpretiert werden. D-

Calibrate: Im Menü Calibrate, Untermenü können die Ausgangspositionen des s angepasst werden. Hierbei wir die Startposition über die Werte - 7 und die Endposition über die Werte 8-55 eingestellt. Fan Set: der verbaute Lüfter des Gerätes kann wahlweise abhängig von der Temperatur der LED-Einheit in der Intensität gesteuert werden (Auto), oder durchgehend mit voller Geschwindigkeit laufen (High). Wireless DMX: Im Untermenü Wireless DMX kann die aktuell gespeicherte Wireless DMX-Verbindung zurückgesetzt werden (Yes), oder der Vorgang abgebrochen werden (No). Test: bietet die Möglichkeit nacheinander verschiedene Funktionen des gesamten Gerätes (ALL) des Motors () der LEDs (Beam LED) und der LEDs der Hintergrundbeleuchtung (Ground LED) zu testen. Factory Reset: setzt das Gerät zurück auf die Werkseinstellungen (Yes), oder bricht den Vorgang ab (No). Keylock: Im Untermenü Keylock wird der Passwortschutz des Gerätes bei Gerätestart aktiviert oder deaktiviert. Wenn Keylock auf ON gestellt ist, startet das Gerät gesperrt und das Menü wird jeweils 0 Sekunden nach der letzten Eingabe erneut gesperrt. Für Änderungen im Menü muss dann das Passwort UP - DOWN - UP - DOWN - ENTER eingegeben werden. Info-Menü MENU System Info Firmware Temperature Software Version Vxxx LED Temp xxxc/f Temp Unit Fahrenheit Power on XXX (Hours) Last Run Hrs XXX (Hours) Celsius Time Info Im Info-Menü (System Info) können verschiedene Betriebsdaten des Gerätes abgerufen werden: Firmware: Unter Firmware wird die aktuell auf dem Gerät installierte Firmware-Version angezeigt. Temperature: Unter Temperature kann die aktuelle Temperatur der LED-Einheit (LED Temp) angezeigt werden. Diese wird, abhängig von der Einstellung im Untermenü Temp Unit, in Grad Celsius oder Grad Fahrenheit angezeigt. Time Info: Im Untermenü Time Info können unter Power on die gesamten Betriebsstunden des Gerätes und unter Last Run Hrs die Betriebsstunden seit dem letzten Einschalten des Gerätes angezeigt werden. D-

Steuerung mit DMX5 DMX-Kanalbelegung Dieses Gerät verfügt über verschiedene DMX-Personalities. Bei diesen werden unterschiedlich viele DMX-Kanäle belegt und die Reaktion des Gerätes unterscheidet sich entsprechend. Es sind 8 DMX-Personalities (-/4-/4-/5-/5-/0-/-/7-Kanäle) wählbar. Durch Änderungen in der Gerätesoftware kann es zu weiteren oder geänderten Funktionen kommen. Auf der Website steht das aktuellste Dokument DMX-Channels als pdf zum Download zur Verfügung. Ch Mode 5 5 Master Dimmer Colour Macro 6- No Colour 4- Amber -9 Yellow Amber 0-7 Yellow 8-45 46-5 Turquoise 54-6 Cyan 6-69 70-77 Lavender 78-85 Mauve 86-9 Magenta 94-0 Pink 0-09 Warm 0-7 8-5 Cool 6-7 Color Jumping Stop 8-9 Color Jumping (Slow to fast) 9-55 Color Fading (Slow to fast) D-4

4Ch Mode 5 5 Master Dimmer Strobe Strobe Open 6-0 Strobe Close -50 5-55 Strobe (Slow to fast, Hz-0Hz) Strobe Open Colour Macro 6-4 No Colour 4- Amber -9 Yellow Amber 0-7 Yellow 8-45 46-5 Turquoise 54-6 Cyan 6-69 70-77 Lavender 78-85 Mauve 86-9 Magenta 94-0 Pink 0-09 Warm 0-7 8-5 Cool 6-7 Color Jumping Stop 8-9 Color Jumping (Slow to fast) 9-55 Color Fading (Slow to fast) 4Ch Mode 5 5 5 4 5 5 5 5 4 5 5 5 5Ch Mode D-5

5Ch Mode 5 5 Master Dimmer Strobe Strobe Open 6-0 Strobe Close - Plus Random (Slow to fast) 4-56 Ramp Up Random (Slow to fast) 57-79 Ramp Down Random (Slow to fast) 80-0 Random Strobe Effect (Slow to fast) 0-7 Strobe Break Effect (Slow to fast) 8-50 Strobe (Slow to fast, Hz-0Hz) 5-55 Strobe Open 4 5 5 5 6 5 7 5 Colour Macro 6-8 No Colour 4- Amber -9 Yellow Amber 0-7 Yellow 8-45 46-5 Turquoise 54-6 Cyan 6-69 70-77 Lavender 78-85 Mauve 86-9 Magenta 94-0 Pink 0-09 Warm 0-7 8-5 Cool 6-7 Color Jumping Stop 8-9 Color Jumping (Slow to fast) 9-55 Color Fading (Slow to fast) Dimmer Curce 9 6-6 No Function Linear Dimmer Curve 64-7 Exponential Dimmer Curve 8-9 Logarithmic Dimmer Curve 9-55 S-Curve Dimmer Curve D-6

Device Settings 6-55 0 4 5 56-05 No Function Dimmer Response LED (Hold s) Dimmer Response Halogen (Hold 5s) 06-55 Setting Fan High (Hold s) 56-05 Setting Fan Auto (Hold s) 06-55 Reset All Function (Hold 5s) 5 Ground Colour Dimmer 5 Ground Colour Strobe (Slow to fast, Hz-0Hz) 5 Ground Colour 5 Ground Colour 5 Ground Colour 5 5 5 4 5 5 5 6 5 7 5 8 5 9 5 0 5 5 5 5 4 5 4 5 5 4 6 5 4 7 5 4 8 5 Ground Colour 9 5 Ground Colour 0 5 Ground Colour 0Ch Mode D-7

Ch Mode 5 5 Speed (fast to slow) 5 Master Dimmer Strobe 4 Strobe Open 6-0 Strobe Close - Plus Random (Slow to fast) 4-56 Ramp Up Random (Slow to fast) 57-79 Ramp Down Random (Slow to fast) 80-0 Random Strobe Effect (Slow to fast) 0-7 Strobe Break Effect (Slow to fast) 8-50 Strobe (Slow to fast, Hz-0Hz) 5-55 Strobe Open 5 5 6 5 7 5 8 5 Colour Macro 6-9 No Colour 4- Amber -9 Yellow Amber 0-7 Yellow 8-45 46-5 Turquoise 54-6 Cyan 6-69 70-77 Lavender 78-85 Mauve 86-9 Magenta 94-0 Pink 0-09 Warm 0-7 8-5 Cool 6-7 Color Jumping Stop 8-9 Color Jumping (Slow to fast) 9-55 Color Fading (Slow to fast) D-8

Rainbow Effect 0-6 0 Rainbow Off 7- Rainbow -7 Rainbow 8-5 Rainbow 54-69 Rainbow 4 70-85 Rainbow 5 86-0 Rainbow 6 0-7 Rainbow 7 8- Rainbow 8 4-49 Rainbow 9 50-65 Rainbow 0 66-8 Rainbow 8-97 Rainbow 98- Rainbow 4-9 Rainbow 4 5 Rainbow 5 Auto No Function 6-0 Auto Program -55 Auto Program 56-80 Auto Program 8-05 Auto Program 4 06-0 Auto Program 5-55 Auto Program 6 56-80 Auto Program 7 8-05 Auto Program 8 06-0 Auto Program 9-55 Auto Program 0 5 Auto Program Speed (Slow to fast) 5 Auto Fade Dimmer Curce 4 6-6 No Function Linear Dimmer Curve 64-7 Exponential Dimmer Curve 8-9 Logarithmic Dimmer Curve 9-55 S-Curve Dimmer Curve Device Settings 5 6-6 64-7 No Function Dimmer Response LED (Hold s) Dimmer Response Halogen (Hold 5s) 8-9 Setting Fan High (Hold s) 9-55 Setting Fan Auto (Hold s) D-9

6 5 Ground Colour Dimmer 7 5 Ground Colour Strobe(Slow to fast, Hz-0Hz) 8 5 Ground Colour 9 5 Ground Colour 0 5 Ground Colour Ground Colour Macro 6- No Colour 4- Amber -9 Yellow Amber 0-7 Yellow 8-45 46-5 Turquoise 54-6 Cyan 6-69 70-77 Lavender 78-85 Mauve 86-9 Magenta 94-0 Pink 0-09 Warm 0-7 8-5 Cool 6-7 Color Jumping Stop 8-9 Color Jumping (Slow to fast) 9-55 Color Fading (Slow to fast) D-0

7Ch Mode 5 5 Speed (fast to slow) 5 Master Dimmer Strobe 4 Strobe Open 6-0 Strobe Close - Plus Random (Slow to fast) 4-56 Ramp Up Random (Slow to fast) 57-79 Ramp Down Random (Slow to fast) 80-0 Random Strobe Effect (Slow to fast) 0-7 Strobe Break Effect (Slow to fast) 8-50 Strobe (Slow to fast, Hz-0Hz) 5-55 Strobe Open 5 5 6 5 7 5 8 5 Colour Macro 6-9 No Colour 4- Amber -9 Yellow Amber 0-7 Yellow 8-45 46-5 Turquoise 54-6 Cyan 6-69 70-77 Lavender 78-85 Mauve 86-9 Magenta 94-0 Pink 0-09 Warm 0-7 8-5 Cool 6-7 Color Jumping Stop 8-9 Color Jumping (Slow to fast) 9-55 Color Fading (Slow to fast) D-

Rainbow Effect 0-6 0 Rainbow Off 7- Rainbow -7 Rainbow 8-5 Rainbow 54-69 Rainbow 4 70-85 Rainbow 5 86-0 Rainbow 6 0-7 Rainbow 7 8- Rainbow 8 4-49 Rainbow 9 50-65 Rainbow 0 66-8 Rainbow 8-97 Rainbow 98- Rainbow 4-9 Rainbow 4 5 Rainbow 5 Auto No Function 6-0 Auto Program -55 Auto Program 56-80 Auto Program 8-05 Auto Program 4 06-0 Auto Program 5-55 Auto Program 6 56-80 Auto Program 7 8-05 Auto Program 8 06-0 Auto Program 9-55 Auto Program 0 5 Auto Program Speed (Slow to fast) 5 Auto Fade Dimmer Curce 4 6-6 No Function Linear Dimmer Curve 64-7 Exponential Dimmer Curve 8-9 Logarithmic Dimmer Curve 9-55 S-Curve Dimmer Curve Device Settings 5 6-6 64-7 No Function Dimmer Response LED (Hold s) Dimmer Response Halogen (Hold 5s) 8-9 Setting Fan High (Hold s) 9-55 Setting Fan Auto (Hold s) D-

6 5 7 5 8 5 9 5 0 5 5 5 5 4 5 5 5 6 5 7 5 8 5 4 9 5 4 0 5 4 5 4 5 Ground Colour Dimmer 5 Ground Colour Strobe(Slow to fast, Hz-0Hz) 4 5 Ground Colour 5 5 Ground Colour 6 5 Ground Colour Ground Colour Macro 6-7 No Colour 4- Amber -9 Yellow Amber 0-7 Yellow 8-45 46-5 Turquoise 54-6 Cyan 6-69 70-77 Lavender 78-85 Mauve 86-9 Magenta 94-0 Pink 0-09 Warm 0-7 8-5 Cool 6-7 Color Jumping Stop 8-9 Color Jumping (Slow to fast) 9-55 Color Fading (Slow to fast) D-

Delivery - Expolite Tour-Cyc 540 RGBW - Power connection cable - Omega Brackets - General Information for Expolite Units - User Manual Expolite devices are carefully checked before shipment. If the delivery is not complete, please contact your distributor immediately. E-4

Product Information Voltage 00V - 40V AC 50/60Hz Power Consumption 500W Dimensions x 6 x 509mm Weight 5,0kg Connectors Power In/Out DMX In/Out Ambient Temperature -0 C - 40 C Humidity* < 80% Protection IP 65 Housing Die-cast aluminium housing LEDs 6x 5W RGBW** + 7x 0,W RGB LED Current A Optics 7-58 Control Stand-Alone / DMX5 / WDMX / RDM DMX-Channels - 7 (/4/4/5/5/0//7) * take note to General Informations for Expolite Units - Notes for Condensation inside Housing. ** Tolerance in colour temperature according to LED manufacturer +/- 0%. 0.5 0. 0.47 0.6 Diameter M ) 0.79 0.90 5.0 6.50 0 4 0 6 46 8 8 0 5 0 Lux center.60 Distance M ) Beam Opening 4.5 Beam Opening.0 4 6 Diameter M ) 6000 4 9000 6 4000 8 50 0 440 4 Distance M ) Lux center E-5

Dimensions E-6

Installation Mounting Hanging The fixture can be mounted in a hanging position using the quicklock brackets. Fixture must be safe mounted in accordance with the relevant regulations and provided with a safetycord to prevent falling. For this purpose, an eyelet for safeties is attached to the device. Standing The fixture can be mounted in an upright or sitting position. A safe and sufficient anti-slip ground must be ensured! NOTE The LED module can be operated in any position. DMX-Connection Use specified DMX-cables to connect the units to each other and to connect them to the controldesk. Enter the addresses and personalities to the fixtures. DMX Addr. DMX Addr.(Nx)+ DMX Addr.(Nx)+... DMX5 CONTROLLER E-7

Operation Display Operation MENU: ENTER: UP: DOWN: MENU ENTER UP Return to previous menu Enter currently selected menu Scroll Up, Increase value Scroll down: Decrease value DOWN Menu Map MENU DMX Address MODE Set DMX Address DMX Signal Select 00-5 DMX Wireless DMX DMX Mode DMX Ch DMX 4Ch DMX 4Ch DMX 5Ch DMX5Ch DMX0Ch DMXCh DMX7Ch Slave Slave Auto Auto Fading 0-55 Auto Jumping 0-55 Dimmer 0-55 Strobe 0-55 0-55 0-55 0-55 0-55 Rainbow Effect 0-55 Auto 0-55 Auto Speed 0-55 Auto Fade 0-55 0-55 Ground Dimmer 0-55 Ground Strobe 0-55 Ground 0-55 Ground 0-55 Ground 0-55 Static Color Macro Amber Yellow Warm Yellow Turquois Cyan Lavender Mauve Magenta Pink Warm Cold Settings Settings Display Rev ON OFF Display ON OFF DMX Fail Hold Blackout Dimmer Curve Linear Exp Log S-Curve Dimmer Response LED Halogen E-8

MENU Settings 0-55 0-55 0-55 0-55 Calibrate 0-55 Fan Set Auto Wireless DMX Reset Wireless DMX Memory TEST ALL Balance High YES NO Beam LED Ground LED Factory Reset Yes Keylock ON Firmware Software Version Vxxx No OFF System Info Temperature LED Temp xxxc Temp Unit Fahrenheit Power on XXX (Hours) Last Run Hrs XXX (Hours) Celsius Time Info E-9

Setting DMX-Address MENU DMX Address Set DMX Address 00-5 The DMX start address of the fixture is set in the menu DMX Address, submenu Set DMX Address. This is retained even when changing the personality. DMX Signal Select MENU MODE DMX Signal Select DMX Wireless DMX In the menu MODE, submenu DMX Signal Select it can be selected, whether the fixture is controlled by DMX via cable (DMX) or via Wireless DMX. Setting DMX-Personality MENU MODE DMX Mode DMX Ch DMX 4Ch DMX 4Ch DMX 5Ch DMX5Ch DMX0Ch DMXCh DMX7Ch The personality is set in the menu MODE, submenu DMX Mode. There are seven different modes which can be choosen: DMXCh, DMX4Ch, DMX4Ch, DMX5Ch, DMX5Ch, DMX0Ch, DMXCh und DMX7Ch. Activating Slave Mode MENU MODE Slave Slave In the menu MODE, submenu Slave, the Slave mode of the fixture can be activated. In this Mode the fixture can be controled by a master unit of the same fixture type. E-0

Stand-Alone Possibilities MENU MODE Auto Static Color Macro Auto Fading 0-55 Auto Jumping 0-55 Dimmer 0-55 Strobe 0-55 0-55 0-55 0-55 0-55 Rainbow Effect 0-55 Auto 0-55 Auto Speed 0-55 Auto Fade 0-55 0-55 Ground Dimmer 0-55 Ground Strobe 0-55 Ground 0-55 Ground 0-55 Ground 0-55 Amber Yellow Warm Yellow Turquois Cyan Lavender Mauve Magenta Pink Warm Cold The Tour-Cyc 540 RGBW has three different possibilities of stand-alone usage: Auto: There are two preset automatic sequences which can be choosen in the submenu Auto. Auto Fading fades between the single steps, Auto Jumping is just jumping through the steps, without fading. It is possible to control the speed of both programs (0-55). Static: In the submenu Static a static scene for Stand-Alone use can be created. This is mixed using the DMX value scale 5 for Dimmer, Strobe,,,,, Rainbow Effect, Auto, Auto Speed, Auto Fade,, (Back-)Ground Dimmer, (Back-)Ground Strobe, (Back-)Ground, (Back-)Ground and (Back-)Ground. Color Macro: 5 preset color macros can be choosen in the submenu Color Macro. E-

Miscellaneous Settings MENU Settings Settings Display Rev ON OFF Display ON OFF DMX Fail Hold Blackout Dimmer Curve Linear Exp Log S-Curve Dimmer Response LED Halogen 0-55 0-55 0-55 0-55 Calibrate 0-55 Fan Set Auto Wireless DMX Reset Wireless DMX Memory TEST ALL Balance High YES NO Beam LED Ground LED Factory Reset Yes Keylock ON No OFF Display Rev: flips the screen display by 80. This is e.g. useful when the fixture is hanging upside down. Display: In the submenu Display the display illumination can be set to turn off automatically approx. one minute after entering the last setting (OFF) or to stay illuminated generally (ON).. DMX Fail: sets how the fixture responses if DMX-signal gets lost. Set Hold to hold the last received value or Blackout for blackout. Dimmer Curve: In the submenu Dimmer Curve, it is possible to choose different dimmer curves. Every curve activates a different dimmer delay, as shown below. Linear Exp Log S-Curve Dimmer Response: the submenu Dimmer Response sets if the dimmer of the led responses immediately to changes (LED) or with a slight delay as a halogen bulb (Halogen). Balance: In the submenu Balance a custom colour calibration is stored which limits the maximum brightness of the colour channels RGBW at the DMX value "55". NOTE: The maximum value can be limited to 0. In this case, a colour channel does not respond to a sent DMX value, which can be misinterpreted as a device error. E-

Calibrate: In the menu Calibrate, submenu, the home positions of the zoom can be calibrated. The start position is set with the values - 7, the end position is set with the values 8-55. Fan Set: the speed of the inbuilt fan of the fixture can be controlled depending on the temperature of the LED-unit (Auto), or with non-stop full speed (High). Wireless DMX: The currently saved wireless DMX-connection can be reset (Yes) in the submenu Wireless DMX, or the process can be cancelled (No). Test: gives the user the opportunity to test all functions (ALL), the zoom motor (), the LEDs (Beam LED) and the LEDs of the background illumination (Ground LED) of the fixture. Factory Reset: sets the fixture back to factory settings (Yes) or cancels this process (No). Keylock: In the menu Keylock the password protection of the fixture is activated or deactivated. If set ON the fixture is password protected when started. 0 seconds after the last setting the menu is locked again. To be able to make changes in the menu the password UP - DOWN - UP - DOWN ENTER needs to be typed in. Info-Menu MENU System Info Firmware Temperature Software Version Vxxx LED Temp xxxc Temp Unit Fahrenheit Power on XXX (Hours) Last Run Hrs XXX (Hours) Celsius Time Info In the Info-Menu (System Info) different operating data of the fixture can be monitored: Firmware: In the submenu Firmware the currently installed firmware version is shown. Temperature: In the submenu Temperature the current temperature of the LED-unit (LED Temp) canbe monitored. This is shown either in degree Celsius or in degree Fahrenheit depending on the setting made in the submenu Temp Unit. Time Info: In the submenu Time Info it is possible to monitor the total operating hours of the fixture (Power on) or the operating hours after the last switch-on of the fixture (Last Run Hrs). E-

Using DMX5 Control DMX-Channel assignment This device has several DMX personalities. In each personality a different number of DMX channels is used and the reaction of the device differs accordingly. There are seven DMX personalities with, 4, 5, 5, 5, 0, and 7 channels selectable. Because of changes in the firmware of the fixture, functions can be added or changed. You can find the current version DMX-Channels as PDF-file on the website, ready to download. Ch Mode 5 5 Master Dimmer Colour Macro 6- No Colour 4- Amber -9 Yellow Amber 0-7 Yellow 8-45 46-5 Turquoise 54-6 Cyan 6-69 70-77 Lavender 78-85 Mauve 86-9 Magenta 94-0 Pink 0-09 Warm 0-7 8-5 Cool 6-7 Color Jumping Stop 8-9 Color Jumping (Slow to fast) 9-55 Color Fading (Slow to fast) E-4

4Ch Mode 5 5 Master Dimmer Strobe Strobe Open 6-0 Strobe Close -50 5-55 Strobe (Slow to fast, Hz-0Hz) Strobe Open Colour Macro 6-4 No Colour 4- Amber -9 Yellow Amber 0-7 Yellow 8-45 46-5 Turquoise 54-6 Cyan 6-69 70-77 Lavender 78-85 Mauve 86-9 Magenta 94-0 Pink 0-09 Warm 0-7 8-5 Cool 6-7 Color Jumping Stop 8-9 Color Jumping (Slow to fast) 9-55 Color Fading (Slow to fast) 4Ch Mode 5 5 5 4 5 5 5 5 4 5 5 5 5Ch Mode E-5

5Ch Mode 5 5 Master Dimmer Strobe Strobe Open 6-0 Strobe Close - Plus Random (Slow to fast) 4-56 Ramp Up Random (Slow to fast) 57-79 Ramp Down Random (Slow to fast) 80-0 Random Strobe Effect (Slow to fast) 0-7 Strobe Break Effect (Slow to fast) 8-50 Strobe (Slow to fast, Hz-0Hz) 5-55 Strobe Open 4 5 5 5 6 5 7 5 Colour Macro 6-8 No Colour 4- Amber -9 Yellow Amber 0-7 Yellow 8-45 46-5 Turquoise 54-6 Cyan 6-69 70-77 Lavender 78-85 Mauve 86-9 Magenta 94-0 Pink 0-09 Warm 0-7 8-5 Cool 6-7 Color Jumping Stop 8-9 Color Jumping (Slow to fast) 9-55 Color Fading (Slow to fast) Dimmer Curce 9 6-6 No Function Linear Dimmer Curve 64-7 Exponential Dimmer Curve 8-9 Logarithmic Dimmer Curve 9-55 S-Curve Dimmer Curve E-6

Device Settings 6-55 0 4 5 56-05 No Function Dimmer Response LED (Hold s) Dimmer Response Halogen (Hold 5s) 06-55 Setting Fan High (Hold s) 56-05 Setting Fan Auto (Hold s) 06-55 Reset All Function (Hold 5s) 5 Ground Colour Dimmer 5 Ground Colour Strobe (Slow to fast, Hz-0Hz) 5 Ground Colour 5 Ground Colour 5 Ground Colour 5 5 5 4 5 5 5 6 5 7 5 8 5 9 5 0 5 5 5 5 4 5 4 5 5 4 6 5 4 7 5 4 8 5 Ground Colour 9 5 Ground Colour 0 5 Ground Colour 0Ch Mode E-7

Ch Mode 5 5 Speed (fast to slow) 5 Master Dimmer Strobe 4 Strobe Open 6-0 Strobe Close - Plus Random (Slow to fast) 4-56 Ramp Up Random (Slow to fast) 57-79 Ramp Down Random (Slow to fast) 80-0 Random Strobe Effect (Slow to fast) 0-7 Strobe Break Effect (Slow to fast) 8-50 Strobe (Slow to fast, Hz-0Hz) 5-55 Strobe Open 5 5 6 5 7 5 8 5 Colour Macro 6-9 No Colour 4- Amber -9 Yellow Amber 0-7 Yellow 8-45 46-5 Turquoise 54-6 Cyan 6-69 70-77 Lavender 78-85 Mauve 86-9 Magenta 94-0 Pink 0-09 Warm 0-7 8-5 Cool 6-7 Color Jumping Stop 8-9 Color Jumping (Slow to fast) 9-55 Color Fading (Slow to fast) E-8

Rainbow Effect 0-6 0 Rainbow Off 7- Rainbow -7 Rainbow 8-5 Rainbow 54-69 Rainbow 4 70-85 Rainbow 5 86-0 Rainbow 6 0-7 Rainbow 7 8- Rainbow 8 4-49 Rainbow 9 50-65 Rainbow 0 66-8 Rainbow 8-97 Rainbow 98- Rainbow 4-9 Rainbow 4 5 Rainbow 5 Auto No Function 6-0 Auto Program -55 Auto Program 56-80 Auto Program 8-05 Auto Program 4 06-0 Auto Program 5-55 Auto Program 6 56-80 Auto Program 7 8-05 Auto Program 8 06-0 Auto Program 9-55 Auto Program 0 5 Auto Program Speed (Slow to fast) 5 Auto Fade Dimmer Curce 4 6-6 No Function Linear Dimmer Curve 64-7 Exponential Dimmer Curve 8-9 Logarithmic Dimmer Curve 9-55 S-Curve Dimmer Curve Device Settings 5 6-6 64-7 No Function Dimmer Response LED (Hold s) Dimmer Response Halogen (Hold 5s) 8-9 Setting Fan High (Hold s) 9-55 Setting Fan Auto (Hold s) E-9

6 5 Ground Colour Dimmer 7 5 Ground Colour Strobe(Slow to fast, Hz-0Hz) 8 5 Ground Colour 9 5 Ground Colour 0 5 Ground Colour Ground Colour Macro 6- No Colour 4- Amber -9 Yellow Amber 0-7 Yellow 8-45 46-5 Turquoise 54-6 Cyan 6-69 70-77 Lavender 78-85 Mauve 86-9 Magenta 94-0 Pink 0-09 Warm 0-7 8-5 Cool 6-7 Color Jumping Stop 8-9 Color Jumping (Slow to fast) 9-55 Color Fading (Slow to fast) E-40

7Ch Mode 5 5 Speed (fast to slow) 5 Master Dimmer Strobe 4 Strobe Open 6-0 Strobe Close - Plus Random (Slow to fast) 4-56 Ramp Up Random (Slow to fast) 57-79 Ramp Down Random (Slow to fast) 80-0 Random Strobe Effect (Slow to fast) 0-7 Strobe Break Effect (Slow to fast) 8-50 Strobe (Slow to fast, Hz-0Hz) 5-55 Strobe Open 5 5 6 5 7 5 8 5 Colour Macro 6-9 No Colour 4- Amber -9 Yellow Amber 0-7 Yellow 8-45 46-5 Turquoise 54-6 Cyan 6-69 70-77 Lavender 78-85 Mauve 86-9 Magenta 94-0 Pink 0-09 Warm 0-7 8-5 Cool 6-7 Color Jumping Stop 8-9 Color Jumping (Slow to fast) 9-55 Color Fading (Slow to fast) E-4

Rainbow Effect 0-6 0 Rainbow Off 7- Rainbow -7 Rainbow 8-5 Rainbow 54-69 Rainbow 4 70-85 Rainbow 5 86-0 Rainbow 6 0-7 Rainbow 7 8- Rainbow 8 4-49 Rainbow 9 50-65 Rainbow 0 66-8 Rainbow 8-97 Rainbow 98- Rainbow 4-9 Rainbow 4 5 Rainbow 5 Auto No Function 6-0 Auto Program -55 Auto Program 56-80 Auto Program 8-05 Auto Program 4 06-0 Auto Program 5-55 Auto Program 6 56-80 Auto Program 7 8-05 Auto Program 8 06-0 Auto Program 9-55 Auto Program 0 5 Auto Program Speed (Slow to fast) 5 Auto Fade Dimmer Curce 4 6-6 No Function Linear Dimmer Curve 64-7 Exponential Dimmer Curve 8-9 Logarithmic Dimmer Curve 9-55 S-Curve Dimmer Curve Device Settings 5 6-6 64-7 No Function Dimmer Response LED (Hold s) Dimmer Response Halogen (Hold 5s) 8-9 Setting Fan High (Hold s) 9-55 Setting Fan Auto (Hold s) E-4

6 5 7 5 8 5 9 5 0 5 5 5 5 4 5 5 5 6 5 7 5 8 5 4 9 5 4 0 5 4 5 4 5 Ground Colour Dimmer 5 Ground Colour Strobe(Slow to fast, Hz-0Hz) 4 5 Ground Colour 5 5 Ground Colour 6 5 Ground Colour Ground Colour Macro 6-7 No Colour 4- Amber -9 Yellow Amber 0-7 Yellow 8-45 46-5 Turquoise 54-6 Cyan 6-69 70-77 Lavender 78-85 Mauve 86-9 Magenta 94-0 Pink 0-09 Warm 0-7 8-5 Cool 6-7 Color Jumping Stop 8-9 Color Jumping (Slow to fast) 9-55 Color Fading (Slow to fast) E-4

08 by Focon Showtechnic Vertriebsgesellschaft mbh