Hyd. CNC Abkantpressen HESSE by DURMA AD-R hyd. CNC press brakes HESSE by DURMA AD-R Mod. AD-R 30175
HESSE by DURMA AD-R Die Einzigartige Kombination aus Leistung und Bedienfreundlichkeit macht die AD-R zu einer extrem wirtschaftlichen Abkantpresse und unterstützt Sie bei der Reduktion der Herstellungskosten Ihrer Produkte - Vom einfachen Einzelbug bis hin zum komplexen, großformatigen Biegeteil. Der spannungsfrei konstruierte Maschinenrahmen, die große Einbauhöhe sowie die große Ausladung sind nur einige der Highlights die diese Maschine bietet. Es werden ausschließlich Elektro- und Hydraulikbauteile international renommierter Hersteller wie z.b. Bosch, Rexroth, Siemens und Telemecanique verbaut. Der Gleichlauf der beiden Hauptzylinder Y1 und Y2 wird elektrohydraulisch mittels Proportionalventiltechnik geregelt. The unique combination of performance and ease of use makes the AD-R an extremely economic press brake which helps to reduce the costs of your products - from simple single bend to complex, large-scale bending parts. A tension-free manufactured machine frame, huge daylight and large throat depth are just some of the highlights this machine offers. Electrical and hydraulic components only of internationally well known manufacturers such as Bosch Rexroth, Siemens and Telemecanique are installed. The synchronisation of the two main cylinders Y1 and Y2 is electro-hydraulic controlled by proportional valves. Laserschutzvorrichtung laser safety device CNC Grafik-Steuerung DT-10 CNC graphic-control DT- 10 Motorische CNC Bombiervorrichtung motorized CNC anti deflection Blechauflagearme auf Linearführungen linear guided sheet support arms Mod. AD-R 30175 Standardausführung standard equipment CNC Steuerung DT-10 3 CNC gesteuerte Achsen (Y1, Y2, X) Bombiervorrichtung motorisch über CNC verstellbar Werkzeugsystem Promecam-Amada Oberwerkzeug 75, leicht gekröpft, Radius gehärtet, geschliffen und geteilt 4-V Matrize 16/ 22/ 35/ 50 mm, Radien gehärtet, geschliffen und geteilt motorischer Hinteranschlag auf Linearführungen und Kugelgewindespindeln Blechauflagearme auf leichtgängigen Linearführungen mit T-Nuten und Kippanschlägen Laserschutzvorrichtung am Oberbalken Maschine und Ausrüstung entsprechend den CE-Vorschriften CNC DT-10 3 CNC controlled axes (Y1, Y2, X) motorized anti deflection system controlled by CNC tool system Promecam-Amada upper tool 75, light cranked, radius hardened, ground and sectioned 4-V die 16/ 22/ 35/ 50 mm, radius hardened, ground and sectioned motorized back gauge on linear guides and driven by ball screws linear guided sheet support arms with T-slots and tilt stops laser safety device on upper beam in conformity with CE-regulations Optionen optional equipment R-Achse CNC Touchscreen Steuerung Cybelec ModEva Pac mit Tastatur, Erstellung von 2D Werkstücken mit der Hand, inkl. PC-Software zusätzliche Fingerblöcke zusätzliche Blechauflagearme Werkzeug-Schnellklemmung lasergehärtete HESSE Werkzeuge Ölkühler Manuelle Bombiervorrichtung anstelle von motorischer R-axis CNC touch-screen control Cybelec ModEva Pac with keyboard, creation of 2D workpieces by hand, incl. PC-software additional finger blocks additional support arms quick tool clamping laser hardened HESSE tools oil cooler manual anti deflection instead of motorized one 2
CNC Steuerungen / computer numeric controls CNC STEUERUNG DT-10 2D Grafikdisplay 10 Intuitive Touchscreen Bedienung (einfaches Zeichnen der Biegekontur mit dem Finger) Direkte Programmierung des Biegewinkels Bedienerfreundliche Programmierung in Dialogform Grafische Simulation des Biegeablaufes Automatische Berechnung der gestreckten Länge für den Blechzuschnitt Grafischer Produkt- und Werkzeugspeicher Korrekturmöglichkeit Manueller, halb- und vollautomatischer Arbeitsmodus Tonnage Berechnung/Programmierung durch die CNC Interner Datenspeicher USB Anschlüsse für Backup und Programmauslagerung CNC DT-10 2D graphic display 10 intuitive touch-screen control (simple drawing of the bending outline with your finger) direct programming of the bending angle user friendly programming in dialogue form graphic simulation of the bending sequence automatic calculation of the blank sheet size graphic product and tool memory correction possibility manual, half and fully automatic work mode tonnage calculation/programming by CNC internal database USB interfaces for backup and programm transportation 2D Grafikdisplay 10 2D graphic display 10 USB Anschlüsse USB interfaces Cybelec ModEva Pac (Option) 2D Grafikdisplay 15 mit zusätzlicher Tastatur Intuitive Touchscreen Bedienung (einfaches Zeichnen der Biegekontur mit dem Finger) Farblich gekennzeichnete, frei belegbare Funktions-Tasten Interner Datenspeicher USB Anschluss PC-Software für Programmierplatz Multisimulation (Vorschlag unterschiedlicher Biegefolgen vom System zur Auswahl) Direkte Programmierung des Biegewinkels Bedienerfreundliche Programmierung in Dialogform Grafische Simulation des Biegeablaufes Automatische Berechnung der gestreckten Länge für den Blechzuschnitt Programmierung der Schrägstellung des Oberbalkens Werkzeugabmessungen programmierbar, dadurch einfacher Aufruf bei Programmierung eines Produktes Korrekturfaktor für Rückfederung und gestreckte Länge Winkelkorrektur Programmierung der Biege- und Rückzugsgeschwindigkeit manueller, halb- und vollautomatischer Arbeitsmodus Tonnage Berechnung/Programmierung durch die CNC Laufende Programme können jederzeit für Einzelbiegungen unterbrochen werden und anschließend zu Ende geführt werden Cybelec ModEva Pac (option) 2D graphic display 15 with additional keyboard intuitive touch-screen control (simple drawing of the bending outline with your finger) color labeled, individually configurable function keys internal data memory USB connection PC software for work station multi simulation (suggestion of various bending sequences to choose from) direct bending angle input user-friendly programming in dialogue form graphic simulation of the bending process on screen automatic calculation of the blank sheet size programming of upper beam at an angle programmable tool dimensions for easy recall when programing a product correction factor for spring-back and straight length bending angle correction programming of bending and retraction speed manual, semi automatic and full automatic working mode tonnage calculation/programming by CNC current programs can be interrupted easily for single bendings and can be subsequently continued and finished 15 Touchscreen 15 touch-screen Tastatur keyboard 3
Hinteranschlag / back gauge Die Fingertiefenpositionen (X) werden automatisch berechnet und durch die Steuerung auf Kugelgewindespindeln und Linearführungen positioniert. Der Anschlag-Finger Rückzug wird ebenfalls automatisch durchgeführt sollte es der zu kantende Teil benötigen. Der Fingerabstand ist entlang der Linearführungen leicht manuell verstellbar. The finger block depth (X) positions are calculated automatically and positioned with the control on the ball screws and linear guides. If it is necessary for the work piece the back gauge retraction is also done automatically. The finger block distance is easy manually adjustable along the linear guide. 1-Achsen Hinteranschlag X (Standard) 1-axes back gauge X (standard) 2-Achsen Hinteranschlag X und R (Option) 2-axes back gauge X and R (optional) 4
Bombierung / anti deflection Um auch bei längeren Biegeteilen einen durchgehend konstanten Biegewinkel zu erhalten kommt die Bombiervorrichtung zum Einsatz. Alle Modelle besitzen eine motorische Tischbombiervorrichtung die über die CNC Steuerung automatisch geregelt wird. To get a constant bending angle over the whole length also on longer work pieces a anti deflection system is used. All models are equiped with a motorized table anti deflection system which is controlled by CNC. Werkzeug / tools Verschiedenste Werkzeuge vom preiswerten Amada-Promecam Systemwerkzeug bis hin zum WILA Präzisionswerkzeug. Individuelle Ober- und Unterwerkzeuge sind ebenfalls schnell verfügbar - fragen Sie einfach nach unserem gesonderten Werkzeugkatalog oder laden Sie sich diesen unter folgendem Link herunter: www.hesse-maschinen.com/produkte/werkzeuge Various tools from reasonable Amada-Promecam system tool up to WILA precision tool. Individual upper and lower tools are also available fast please ask for our separate tools catalogue or download it yourself under the following link: www.hesse-maschinen.com/en/products/tools Oberwerkzeug 75, leicht gekröpft, Radius gehärtet, geschliffen und geteilt. 4-V Matrize 16/ 22/ 35/ 50 mm, Radien gehärtet, geschliffen und geteilt. Werkzeug-Schnellklemmung (Option). upper tool 75, light cranked, radius hardened, ground and sectioned. 4-V die 16/ 22/ 35/ 50 mm, radius hardened, ground and sectioned. quick tool clamping (optional). Sicherheit / safety Alle HESSE by DURMA CNC Abkantpressen entsprechen den aktuellen Sicherheits- und CE-Bestimmungen und sind unter anderem mit einem Laser-Sicherheitssystem an der Maschinen-Vorderseite ausgerüstet. All HESSE by DURMA CNC press brakes comply with the current safety and CE-regulations and are equipped (among other things) with a laser safety device on the machine front. 5
Weitere Standardausrüstung / further standard equiptment Blechauflagearme auf leichtgängigen Linearführungen mit T-Nuten und Kippanschlägen. linear guided sheet support arms with T-slots and tilt stops. Oberbalkenführung und Linearmessgeber. upper beam guiding and linear measuring system. 6
Biegetabelle / bending chart ton 7
Technische Daten / technical details AD-R 1260 2060 25100 30100 30135 30175 30220 30320 37175 Presskraft / bending force ton 60 60 100 100 135 175 220 320 175 Biegelänge / bending length A mm 1.250 2.050 2.550 3.050 3.050 3.050 3.050 3.050 3.700 Abstand zwischen den Ständern / distance between columns B mm 1.050 1.700 2.200 2.600 2.600 2.600 2.600 2.600 3.100 Eilgang / rapid speed mm/sec 200 200 180 180 160 120 120 100 120 Biegegeschwindigkeit / working speed Rückzugsgeschwindigkeit / return speed mm/sec 10 10 10 10 10 10 10 10 10 mm/sec 110 110 120 120 120 100 100 100 100 Bombierung / crowning mot. mot. mot. mot. mot. mot. mot. mot. mot. Einbauhöhe / daylight D mm 400 400 530 530 530 530 530 630 530 Tischbreite / table width G mm 104 104 104 104 104 104 104 154 104 Tischhöhe / table height F mm 900 900 900 900 900 900 900 900 900 Unterflur / depth of pit F1 mm - - - - - - - - - Hub / stroke C mm 130 130 265 265 265 265 265 365 265 Ausladung / throat depth E mm 350 350 410 410 410 410 410 410 410 Auflegearme / support arms 2 2 2 2 2 2 2 2 2 Hinteranschlag-Fingerblöcke / back gauge finger blocks Hinteranschlaggeschwindigkeit / speed of travel in X-axis Hinteranschlagbereich / travel in X-axis max. Geschwindigkeit R-Achse / max. speed of travel in R-axis Verfahrbereich R-Achse / travel in R-axis 2 2 2 2 2 2 2 2 2 mm/sec 250 250 250 250 250 250 250 250 250 mm 750 650 650 650 650 650 650 650 650 mm/sec 300 350 350 350 350 350 350 350 350 mm 200 250 250 250 250 250 250 250 250 Öltank / oiltank capacity It 100 100 100 100 150 250 250 250 250 Motorleistung / motor power kw 7,5 7,5 11 11 15 18,5 22 37 18,5 Länge / length L mm 2.300 3.200 3.800 4.200 4.200 4.250 4.250 4.300 4.950 Breite / width W mm 1.200 1.200 1.670 1.670 1.680 1.700 1.770 1.820 1.700 Höhe / height H mm 2.350 2.350 2.750 2.750 2.750 2.750 2.900 3.230 2.900 Gewicht ca. / weight approx. kg 3.100 3.550 8.650 9.250 10.250 11.250 12.250 17.250 13.000 8
Technische Daten / technical details 9
Technische Daten / technical details AD-R 37220 40175 40220 40320 40400 60220 60320 60400 Presskraft / bending force ton 220 175 220 320 400 220 320 400 Biegelänge / bending length A mm 3.700 4.050 4.050 4.050 4.050 6.050 6.050 6.050 Abstand zwischen den Ständern / distance between columns B mm 3.100 3.600 3.600 3.600 3.400 5.100 5.100 5.100 Eilgang / rapid speed mm/sec 120 120 120 100 100 100 100 100 Biegegeschwindigkeit / working speed Rückzugsgeschwindigkeit / return speed mm/sec 10 10 10 10 8 10 10 8 mm/sec 100 100 100 100 80 100 100 80 Bombierung / crowning mot. mot. mot. mot. mot. mot. mot. mot. Einbauhöhe / daylight D mm 530 530 530 630 630 530 630 630 Tischbreite / table width G mm 104 104 104 154 154 154 154 154 Tischhöhe / table height F mm 900 900 900 900 1.040 1.100 1.100 1.220 Unterflur / depth of pit F1 mm - - - - - - - - Hub / stroke C mm 265 265 265 365 365 265 365 365 Ausladung / throat depth E mm 410 410 410 410 510 410 410 510 Auflegearme / support arms 2 2 2 2 2 4 4 4 Hinteranschlag-Fingerblöcke / back gauge finger blocks Hinteranschlaggeschwindigkeit / speed of travel in X-axis Hinteranschlagbereich / travel in X-axis max. Geschwindigkeit R-Achse / max. speed of travel in R-axis Verfahrbereich R-Achse / travel in R-axis 2 2 2 2 2 4 4 4 mm/sec 250 250 250 250 250 250 250 250 mm 650 650 650 650 750 750 750 750 mm/sec 650 350 350 350 300 300 300 300 mm 250 250 250 250 250 250 250 250 Öltank / oiltank capacity It 250 250 250 250 450 250 250 500 Motorleistung / motor power kw 22 18,5 22 37 37 22 37 37 Länge / length L mm 4.950 5.250 5.250 5.300 5.750 7.500 7.500 7.500 Breite / width W mm 1.770 1.700 1.770 1.910 2.110 1.770 1.910 2.110 Höhe / height H mm 2.900 2.750 2.900 3.230 3.540 3.250 3.450 3.710 Gewicht ca. / weight approx. kg 14.100 12.850 14.750 20.750 26.750 20.590 28.250 35.750 10
Technische Daten / technical details 11
V151216 TÄGLICH AKTUALISIERTE LAGERLISTE UNTER www.hesse-maschinen.com Vertrauen Sie auf über 65 Jahre Erfahrung! Die Firma HESSE+CO wurde 1947 als Hersteller von Blechbearbeitungsmaschinen gegründet. Seit 1980 sind wir auf den Handel mit neuen sowie gebrauchten Blechbearbeitungs- und Werkzeugmaschinen spezialisiert. Wir haben ständig etwa 300 Maschinen in unserer 2.000 m² großen Ausstellungshalle, die nur 20 Minuten vom internationalen Flughafen Wien entfernt ist. Trust in more than 65 years of experience! HESSE+CO was established in 1947 as a manufacturer of sheet metal working machines. Since 1980 we are specialized in dealing with new and second hand sheet metal processing machines and machine tools. We always have approximately 300 machines available in our 2.000 m² showroom, which is located only 20 minutes from the Vienna International Airport, waiting for your inspection. www.hesse-maschinen.com Ihr Partner seit 1947 HESSE+CO Maschinenfabrik GmbH Industriezentrum NÖ-Süd Straße 4 - Objekt 8 A-2351 Wiener Neudorf AUSTRIA Technische Änderungen, Irrtum und Druckfehler vorbehalten. Gültig bis auf Widerruf. Tel.: +43/2236/638 70-0 Fax: +43/2236/636 62 office@hesse-maschinen.com www.hesse-maschinen.com www.blechpower.com