Zellpuffer Cellular buffers Zellpuffer Cellular buffers Zellpuffer von transprotec zeicnen sic bei größeren Federwegen durc ein oes Arbeitsaufnamevermögen aus. Eigenscaften wie günstige Verzögerungswerte sowie niedrige Endkräfte treten ier in den Vordergrund. Zellpuffer von transprotec werden aus zelligem Polyuretan- Elastomer gefertigt. Die normale Qualität at ein Raumgewict von 0,53g/cm³. Im Gegensatz zu den Gummi-Ansclagpuffern zeicnen sic Zellpuffer aus durc Beständigkeit gegen Fette und Öle Beständigkeit gegen Ozon Beständigkeit gegen Benzin Beständigkeit gegen UV-Stralung Zellpuffer sind alterungsbeständig. Sie können bei Umgebungstemperaturen von -20 C bis + C eingesetzt werden. transprotec liefert Zellpuffer in folgenden Spezifikationen: Zellpuffer mit Stal-Grundplatte Zellpuffer mit Kunststoffgrundplatte Zellpuffer mit Gewindebolzen Zellpuffer mit Innengewinde Als optionale Sicereitseinrictung sind die Zellpuffer mit Stal-Grundplatte (ab mm Ø) auc mit einer Seilsicerung lieferbar. Für den Einbau ist zu beacten: Max. Kompression der Pufferlänge (75 %). Max. Querdenung bis zu % des Pufferdurcmessers. Gegenfläce des Puffers aus Riffelblec und mindestens 1,2 x Pufferdurcmesser groß, wenn kein Zellpuffer mit gleicem Durcmesser als Gegenpuffer verwendet wird. Cellular buffers from transprotec are caracterised by long compression lengts and ig energy absorption capacity. Te result is good deceleration values and low final forces. Cellular buffers from transprotec are manufactured from cellular polyuretane elastomers. Te normal quality as a volumetric weigt of 0.53 g/cm³. In contrast to rubber stop buffers, cellular buffers are: Resistant against grease and oils Resistant against ozone Resistant against petrol Resistant against UV radiation Cellular buffers are non-ageing. Tey can be used at ambient temperatures of 20 C to + C. transprotec provides cellular buffers wit te following specifications: Cellular buffers wit steel base plate Cellular buffers wit plastic base plate Cellular buffers wit treaded bolts Wen installing, observe te following: Cellular buffers wit internal tread As an optional safety feature, te cellular buffers wit steel base plates (larger tan mm Ø) are also available wit a cable safety system. Max. compression of buffer lengt (75 %). Max. transverse strain up to % of buffer diameter. Opposite face of buffer made of corrugated seet metal and at least 1.2x larger tan buffer diameter wen a cellular buffer of te same diameter is NOT used as an opposing buffer. 19.13.
Zellpuffer mit Kunststoff-Grundplatte Cellular buffers wit plastic base plate Zellpuffer mit Kunststoff-Grundplatte Cellular buffers wit plastic base plate s e a ZFK-0x0 Wmax F f Gewict a e s (J) (kn) (mm) (kg) (mm) (mm) (mm) (mm) (mm) (mm) 30 0, ZFK-0x0 0 60 0,60 ZFK-0x120 600 90 0,70 120 ZFK-x0 0 38 0,60 ZFK-x 0 75 0,90 ZFK-x1 1 112 1,15 1 ZFK-x0 7 47 1,20 ZFK-x 10 94 1,65 ZFK-x190 2 142 1,46 190 ZFK-x0 0 60 2,20 ZFK-x 3 120 3,10 ZFK-x2 1 4,00 2 ZFK-x 31 75 4,00 ZFK-x 00 2 1 5, ZFK-x300 94 225 7, 300 110 13 10 13 10 17 12 17 12 2 21 14 Grundplatte auc in Aluminium lieferbar. Zellkörper-Werkstoff: zelliges Polyuretan-Elastomer (0,53g/cm³) Ab ø mm mit Seilsicerung lieferbar. Data apply for v < 1 m/s and buffer compression 0,75 x Also available wit aluminium plates. Buffer material: polyuretane elastomere (0.53g/cm³) Wit cable safety system for ø mm and bigger on request. f = Federweg des Puffers / compression of te buffer (mm) 19.14.
Zellpuffer mit Stal-Grundplatte Cellular buffers wit steel base plate Zellpuffer mit Stal-Grundplatte Cellular buffers wit steel base plate s e a ZFS-2x 6000 Wmax F f Gewict a e s (J) (kn) (mm) (kg) (mm) (mm) (mm) (mm) (mm) (mm) 94 7, ZFS-2x2 10 0 188 11,00 2 2 ZFS-2x375 100 2 15,00 375 ZFS-315x 10 120 26,00 ZFS-315x315 200 0 236 33,00 315 315 ZFS-315x475 36000 356 41,00 475 ZFS-0x 200 1 51,00 ZFS-0x0 0 0 300 66,00 0 0 ZFS-0x600 70 4 81,00 600 ZFS-0x2 0 188 88,00 ZFS-0x0 96000 0 375 116,00 0 0 ZFS-0x7 1400 5 146,00 7 ZFS-600x300 000 225 129,00 ZFS-600x600 000 0 4 178,00 600 600 ZFS-600x900 1800 675 230,00 900 2 300 315 21 2 15 0 21 315 15 0 25 0 20 600 25 0 20 730 25 600 20 Zellkörper-Werkstoff: zelliges Polyuretan-Elastomer (0,53g/cm³) Auc mit Seilsicerung lieferbar. Data apply for v < 1 m/s and buffer compression 0,75 x Buffer material: polyuretane elastomere (0.53g/cm³) Wit cable safety system on request. f = Federweg des Puffers / compression of te buffer (mm) 19.15.
Zellpuffer mit Gewindebolzen Cellular buffers wit treaded bolts Zellpuffer mit Gewindebolzen Cellular buffers wit treaded bolts l Wmax F f Gewict l (J) (kn) (mm) (kg) (mm) (mm) (mm) (mm) ZB-070x070 330 30 52 0,25 70 70 ZB-0x0 30 0,20 ZB-0x0 2) 0 60 0,30 ZB-0x120 600 90 0, 120 ZB-x0 0 38 0,30 ZB-x 2) 0 75 0, ZB-x1 1 112 0,70 1 ZB-x0 7 47 0, ZB-x 2) 10 94 0,90 ZB-x190 2 142 1,30 190 ZB-x0 0 60 0,95 ZB-x 2) 3 120 1, ZB-x2 1 2,65 2 ZB-x 31 75 1,75 ZB-x 2) 00 2 1 3, ZB-x300 94 225 5,00 300 ZB-2x 6000 94 5, ZB-2x2 10 0 188 8, 2 2 ZB-2x375 100 2 11, 375 ZB-315x 10 120 8, ZB-315x315 200 0 236 14,65 315 315 ZB-315x475 36000 356 20, 475 ZB-0x 200 1 16, ZB-0x0 0 0 300 29,00 0 0 ZB-0x600 70 4 41, 600 M24 M24 M30 2) auc in scwarz, ydrolysebeständig lieferbar Data apply for v < 1 m/s and buffer compression Also available in black ydrolysis-resistant 0,75 x version f = Federweg des Puffers / compression of te buffer (mm) 19.16.
Zellpuffer mit Innengewinde Cellular buffers wit internal tread Zellpuffer mit Innengewinde Cellular buffers wit internal tread t Wmax F f Gewict t (J) (kn) (mm) (kg) (mm) (mm) (mm) (mm) ZI-0x0 30 0,20 ZI-0x0 0 60 0,30 M12 12,5 ZI-0x120 600 90 0, 120 ZI-x0 0 38 0,30 ZI-x 2) 0 75 0, M12 12,5 ZI-x1 1 112 0,70 1 ZI-x0 7 47 0, ZI-x 10 94 0,90 M12 12,5 ZI-x190 2 142 1,30 190 ZI-x0 0 60 0,95 ZI-x 3 120 1, M12 14 ZI-x2 1 2,65 2 ZI-x 31 75 1,75 ZI-x 00 2 1 3, M12 14 ZI-x300 94 225 5,00 300 ZI-2x 6000 94 5, ZI-2x2 10 0 188 8, 2 2 M24 25 ZI-2x375 100 2 11, 375 ZI-315x 10 120 8, ZI-315x315 200 0 236 14,65 315 315 M24 25 ZI-315x475 36000 356 20, 475 ZI-0x 200 1 16, ZI-0x0 0 0 300 29,00 0 0 M30 30 ZI-0x600 70 4 41, 600 2) auc in scwarz, Zellkörper-Werkstoff: zelliges Polyuretan-Elastomer (0,53g/cm³) ydrolysebeständig, lieferbar Data apply for v < 1 m/s and buffer compression 0,75 x Also available in black, Buffer material: polyuretane elastomere (0.53g/cm³) ydrolysis-resistant version f = Federweg des Puffers / compression of te buffer (mm) 19.17.