Winner of the 201 Innovation Prize in Rhineland- Palatinate! G Sensor Packages. or SM Mounting of reepitch and ixpitch Sensors.
G Sensor Packages for SM ssembly. The new, extremely compact packages for SM assembly combine simple handling with high robustness. The magnetoresistive MR sensor chips are completely enclosed and the packages allow operation up to 125. n integrated redistribution of the internal connections means that all the sensors have identical external connections, so avoiding the need for different P layouts for different sensors in one family. The requirements for packages for MR sensors are complex and demanding. In a nationally-funded R & project Sensitec has developed a new package family to fulfill the following demands: The package has to protect the sensor chip from mechanical and chemical influences The complete module, comprising material, assembly and packaging technology, as well the sensor chip must be extremely reliable. No magnetic materials should be used in the package, to avoid affecting the performance of the MR sensor chip. Materials should be used that minimize thermal stresses as far as possible. The package should be cost-effective to ensure a good price-performance relationship. The dimensions should be as small as possible to provide adequate protection, yet allow a high component density on the P. The result is a family of very small and Grid rray (G) packages. There are various different sizes to cover a wide range of MR sensor chips. Those MR sensors for angle, length and magnetic field measurement, which are typically mounted at the edge of the P, are available in two package sizes: G6S and G6. The distance from the active edge of the sensor chip to the outside edge of the package has been kept to a minimum, to avoid any significant loss in the permissible air gap between sensor and magnetic scale. Gmulti provides a flexible package, in which further signal processing may be integrated in addition to the sensor chip. y combining reepitch- or ixpitch-sensors with a compact signal conditioning a highly integrated sensor module with amplified or digital output signals is created. The external connections for any particular package size for G6S and G6 are common, due to an integrated redistribution of the internal connections. The footprint of the package is also identical, to avoid the need for different P layouts for each sensor type. ll variants are possible and can be realized as customized solution upon request.
»» G SNSOR PKGS. Simply robust, smart and flexible.
imensions of the G amily. hip types Type Information G6S G6S imensions in mm.0 x 2.6 x 1.5 75 798 G705 G708 reepitch ixpitch ield sensor Reference sensor hip types Type Information G6 G6 imensions in mm 6.0 x 2.6 x 1.5 76 79 795 796 797 780 reepitch ixpitch, high resistance ixpitch ixpitch ixpitch ixpitch hip types Type Information G8 G8 imensions in mm.0 x.0 x 1. 756 ield sensor Sensor Signal processing Type Information Gmulti 75 798 ic-tw2 6 x 7. x 1.8 mm Interpolation, programmable (up to 6 x) 796 79 STINT20 6 x 8 x 1.8 mm Interpolation (up to 20 x) 780 * * more on request
zul. bweichungen allgemeingültige Obfl. zul. bweichungen Änd. Z. atum atum enennung zul. bweichungen allgemeingültige Obfl. earb. Änd. Z. atum atum earb. Änd. Z. atum allgemeingültige Obfl. earb. atum 5 6 enennung 5 6 enennung 5 6 latt l. latt l. 1 2 latt l. zul. bweichungen atum zul. bweichungen zul. bweichungen zul. bweichungen atum earb. atum Änd. Z. atum 1 2 zul. bweichungen allgemeingültige Obfl. earb. allgemeingültige zul. Obfl. bweichungen atum earb. enennung atum atum 2.10.2015 ofmann Änd. Z. atum Änd. Z. atum atum earb. earb. Obfl. 2.10.2015 enennung earb. atum 2.10.2015 enennung ofmann opyright by Sensitec 5 5 6 6 allgemeingültige Werkstückkanten opyright by Sensitec ofmann 5 6 enennung atum enennung onfidential enennung latt latt l. l. opyright by Sensitec onfidential latt l. latt l. onfidential latt l. latt l. Packages. 1 2 G6S G6 G8 ength ():.0 mm Width (): 2.6 mm eight (): 1.5 mm ength (): 6.0 mm Width (): 2.6 mm eight (): 1.5 mm ength ():.0 mm Width ():.0 mm eight (): 1. mm r = Sensor type P = Production week = Production year d = Sensor type = Production week = Production year d = Sensor type = Production week = Production year GmultiTW2 ength (): 7. mm änge Width (): 7, mm (): 6.0 mm reite (): 6,0 mm änge (): 7, mm öhe (): 1,7 mm reite (): 6,0 mm eight (): öhe (): 1.7 1,7 mm änge (): 7, mm zul. bweichungenzul. bweichungen allgemeingültige Werkstückkanten reite (): 6,0 mm öhe (): 1,7 mm IN IN Markierung 2768 T1-m 2768 T1-m r = Sensor Typ Markierung x =SI Typ atum r = Sensor Typ atum $= Produktionswochex =SI Typ earb. &= r Produktionsjahr = Markierung Sensor $= Produktionswoche type r = Sensor Typ &= Produktionsjahr x = x =SI Typ type $= Produktionswoche &= Produktionsjahr $ = Production week & = Production year 2768 - m 2768 - m atum atum enennung änge reite öhe G6 G6 S S latt l. opyright by Sensitec onfidential opyright by Sensitec onfidential 2768 - m 22.10.2015 ofmann Gmulti 22.10.2015 ofmann TW2 Gmulti TW2 Technical ata. earb. 22.10.2015 ofmann enennung opyright by Sensitec Gmulti TW2 opyright by Sensitec reite änge (): (): 8,0 6,0 mm mm änge :,0mm : öhe,0mm (): 1,7 mm reite : 2,6mm : 2,6mm öhe : 1, mm: 1, mm onfidential opyright by Sensitec onfidential GmultiS20 ength (): 8.0 mm IN Width (): 2768 T1-m6.0 mm eight (): 1.7 mm Markierung r = Sensor Typ IN y =SI änge Typ (): 8,0 mmänge (): 8,0 mm $= Produktionswoche reite (): 6,0 mmreite (): 6,0 2768 mmt1-m &= Produktionsjahr öhe (): 1,7 mmöhe (): 1,7 mm r = Sensor type Markierung Markierung r = Sensor Typ r = Sensor Typ y =SI Typ y SI type y =SI Typ $= Produktionswoche $= Produktionswoche &= Produktionsjahr latt &= Produktionsjahr 2768 - m $ = Production week l. & = Production year onfidential IN 2768 T1-m G6 änge reite öhe opyright by Sensitec : 6,0mm : 2,6mm : 1, mm änge reite öhe G6 G6 onfidential chtung: Zeichnung dient nur als Info für atenblatt opyright by Sensitec (für die atstellung wurden - auteile von Gmulti TW2 verwendet) opyright by Sensitec änge : 6,0mm reite : 2,6mm öhe : 1, mm : 6,0mm : 2,6mm : 1, mm zul. bweichungen IN 2768 T1-m onfidential Gmulti Stint 20 chtung: Zeichnung chtung: dient nur Zeichnung als Info für dient atenblatt nur als Info für atenblatt (für die atstellung (für wurden die atstellung - auteile wurden von Gmulti - auteile TW2 von verwendet) Gmulti TW2 verwendet) 2768 - m 2768 - m Gmulti Stint Gmulti 20 Stint 20 atum onfidential zul. bweichungen atum zul. bweichungen earb. IN IN 2768 T1-m 2768 T1-m enennung atum atum G8 earb. earb. atum opyright by Sensitec änge reite öhe atum enennung : mm : mm : 1, mm änge änge reite reite öhe öhe latt G8 l. G8 enennung onfidential opyright by Sensitec opyright by Sensitec : mm : mm : mm : mm : 1, mm : 1, mm onfidential latt onfidential l. latt l. Parameter Value Unit Supply voltage 5 V mbient temperature range -0... +125 Moisture sensitivity level (MS) 2 - elivery form Tape & Reel - elivery batch size G6S & G6 2500 - elivery batch size G8 5000 - elivery batch size Gmulti 1000 - The data given in the table are characteristic values. atasheets with complete technical specifications can be found at. dvantages and enefits. Very small and compact size Small footprint on the P road temperature range Usable even under extreme operating conditions Identical external connections (G6S / G6) ifferent sensor types (e.g. 2 mm and 5 mm) can be used with one main P Sensor element completely enclosed ven more robust and mechanically protected eliverable in production packaging (Tape & Reel) ully automatic SM assembly possible Sensor modules with extended functionality integrated in only one package Very small package size, reducing the effort of design and production lexible package technology ustomized solutions possible
Sensitec Gmb Georg-Ohm-Straße 11 56 ahnau Germany Tel.: +9 61 9788-0 ax: +9 61 9788-17 -Mail: sensitec@sensitec.com October 2015 Subject to technical changes.