Lichtstative 231 Showtec
Two-Stands with truss Light & Show Showtec Two Stand with Truss ORDERCODE 70108 3 m. Showtec Extra truss part ORDERCODE 70130 1,5 m. Max. load: 50 kg 25 kg Showtec Two Stand with Truss and Two extra T-Bars ORDERCODE 70129 3 m. Showtec Extra truss part ORDERCODE 70130 1,5 m. 70129 Max. load: 50 kg Own weight: 27 kg 532 Showtec Lighting-Stands Two-Stands with truss
Light & Show Two-Stands with truss Showtec Two Stand with metal decotruss ORDERCODE 70149 Adjustable height: 170-300cm Width: 600cm Maximum Load: 30kg point load / 60 kg distributed load Showtec Extra truss part ORDERCODE 70130 1,5 m. Two-Stands with truss Lighting-Stands 533 Showtec
Metal stands Light & Show LS-35 Lighting stand Metal stand black with T-bar Metal Medium Stand Tripod stand MKII incl. T-bar ORDERCODE 70106 Max. load 60 Kg, max. height 3,5m, Black ORDERCODE 70120 1,02-2,20m / 15 kg ORDERCODE 70133 1,70-3,65m / 15 kg ORDERCODE 70103 Steel lighting stand Polished 1,46-2,62m / 40 kg 70106 : Height: 173-350 cm. Net. weight: 12 Kg. Load capacity: 60 Kg. Max. height: 3,46m. Leg length: 1,47m. Max. distance between legs: 1,62m. 70120 : Maximum load: 15 kg. Maximum height: 220 cm. Minimum height: 102 cm. Own weight: 2 kg. 70133 : Maximum load: 15 kg Maximum height: 365 cm. Minimum height: 170 cm. Own weight: 6 kg. 70103 : Maximum load: 40 kg. Maximum height: 262 cm. Minimum height: 146 cm. Own weight: 10 kg. 534 Showtec Lighting-Stands Metal stands
Light & Show Stands with T-bars Alu Stand 4 m. double T-Bar Alu Stand 3,5 m. double T-Bar Alu Stand 4 m. incl. T-Bar Alu Stand 4 m. incl. T-Bar ORDERCODE 70127 max 25 kg, Silver ORDERCODE 70128 Black ORDERCODE 70123 max 30 kg, Polished ORDERCODE 70124 max 30 kg, Black 1220 1220 1220 1220 1850 1850 1180 1180 70127 : Max. load: 25 kg Own weight: 6,2 kg 70128 : Max. load: 30 kg Own weight: 9 kg 70123 : Max. load: 30 kg Own weight: 9,8 kg - polished - 70124 : Max. load: 30 kg Own weight: 10,74 kg Stands with T-bars Lighting-Stands 535 Showtec
Followspot-stands Light & Show Followspotstand Wind-Up ORDERCODE 70138 1-1,55m / 30 kg Followspotstand ORDERCODE 70139 1,25-2,15m / 15 kg Professional Followspotstand ORDERCODE 70146 1,09-1,47m / 40 kg 70146 : Follow spot stand. 1 riser, 2 sections. Tube diameter: 50mm, 32mm Leg. Diameter: Ø30mm Minimum height: 109cm Maximum height: 147cm Maximum load: 40 Kg 110cm 8,7 Kg Insertion diameter: 28mm (standard TV spigot) 70138 : Maximal load: 30 kg Maximal height: 155 cm Minimal height: 100 cm 12 kg 70139 : Maximal load: 15 kg Maximal height: 215 cm Minimal height: 125 cm 6 kg 536 Showtec Lighting-Stands Followspot-stands
Light & Show Wind-up stands Wind-Up Lightstand ORDERCODE 70104 1,81-3,80m / 30 kg Showtec Wind-Up Lightstand 4 m. ORDERCODE 70143 with winch spigot adapter. 1,6-3,1m / 18,5 kg Three section, chrome plated steel stand with geared column. 3 sections. Tube diameters 55, 45, 38mm. 2 risers extend simultaneously at one elevation of 4,4cm per handle turn. Chrombeschichtetes Stahlstativ mit drei Segmenten. Rohrdurchmesser 55, 45 und 38 mm. 2 Gewindeschrauben verlängern gleichzeitig auf eine Höhe von 4,4 cm pro Umdrehung. ORDERCODE 70142 70142 : Maximal load: 18,5 kg Maximal height: 310 cm Minimal height: 160 cm 70143 : Maximal load: 18,5 kg Maximal height: 310 cm Minimal height: 160 cm with winch and T-bar 1,6-3,1m / 18,5 kg 70104 : Leg. Diameter: Ø30 mm Minimum height: 181 cm. Maximum height: 380 cm Maximum load: 30 kg 128 cm 22,4 kg Insertion diameter: 28 mm (standard TV spigot) Wind-up stands Lighting-Stands 537 Showtec
Standadapters Light & Show Showtec Elevator Towers Showtec Elevator Towers are manufactured to lift loads vertically.the telescopic system is composed of three steel profi les handled through a steel cable of high resistance to the traction, guided by pulleys provided by self-lubricant ball bearings. The entire mobile system is fi xed via security catches, essential during the tower effort. Automatic break winch according to the standard VBG 8/10.93 and certifi cate TÜV 9591009. The leg ends are adjustable in height. At the end of the legs are stabilizers, in order to make it easy to install the tower on every kind of ground. It also has a water level, for vertical adjustment. The entire set is covered by electrolytic zinc in order to protect it against corrosion and oxidation. Die neuen Elevator Tower von Showtec wurden zum vertikalen Hochziehen von Lasten entwickelt. Das Teleskopsystem besteht aus drei Stahlprofi len, die durch ein widerstandsfähiges Stahlkabel gehalten werden, das durch Rollen bzw. Kugellager geführt wird. Das bewegliche System wird durch Sicherheitsklemmen justiert, das ist während des Aufrichtens besonders wichtig. Ausserdem verfügen die Elevator Towers über eine automatische Kurbelbremse, die dem Standard VBG 8/10.93 entspricht und TÜV-zertifi ziert ist (TÜV 9591009). Die Teleskopbeine haben höhenverstellbare, schockabsorbierende Füße - dies ermöglicht eine stabile Aufstellung, egal auf welcher Oberfl äche die ElevatorTowers stehen. Das Produkt verfügt zusatzlich über eine Wasserwaagenanzeige, um es vertikal zu justieren. Die Oberfl äche des Sets ist so versiegelt, dass sie gegen Korrosion bzw. Oxidation geschützt ist. Showtec LS-100 ORDERCODE 70180 Max. load 100 Kg, max. height 5m 70180 : Maximum vertical load: 100 Kg Minimum vertical load: 25 Kg Insertion diameter: 35mm Maximum Height: 5m Minimum Height: 1,89m Number of sections: 3 2x2m 40 Kg Showtec LS-150 ORDERCODE 70181 Max. load 150 Kg, max. height 5,3m 70181 : Maximum vertical load: 150 Kg Minimum vertical load: 25 Kg Insertion diameter: 35mm Maximum Height: 5,3m Minimum Height: 1,72m Number of sections: 4 2x2m 45 Kg Showtec Stand Adapter ORDERCODE 70172 Showtec Stand Adapter ORDERCODE 70173 Showtec Stand Adapter ORDERCODE 70174 Showtec Stand Adapter ORDERCODE 70175 Top: Topmountingscrew Bottom: 38-35mm Top: Entry for 28mm. TV Spigot Bottom: 38mm Top: Entry for 28mm. TV Spigot Bottom: 35mm Top: Entry for 28mm. TV Spigot Bottom: 32mm 538 Showtec Lighting-Stands Standadapters
Light & Show Wind-up stands Showtec LS-200 ORDERCODE 70182 Max. load 220 Kg, max. height 5,3m 70182 : Maximum vertical load: 220 Kg Minimum vertical load: 25 Kg Insertion diameter: 55mm Maximum Height: 5,3m Minimum Height: 1,75m Number of sections: 4 2x2m 90 Kg Showtec LS-210 ORDERCODE 70183 Max. load 220 Kg, max. height 6,5m 70183 : Maximum vertical load: 220 Kg Minimum vertical load: 25 Kg Insertion diameter: 40mm Maximum Height: 6,5m Minimum Height: 1,84m Number of sections: 5 2x2m 99 Kg Showtec Adapter ORDERCODE 70176 This adapter turns your stand into a stand for use with standard TV-spigots in order to make more fl exible, professional and stable rigging. Dieser Adapter macht aus einem normalen Stativ ein Stativ für die Verwendung von Standard-TV- Spigots, um eine fl exiblere und stabilere Montage zu ermöglichen. Der Adapter paßt auf Stative mit einem Durchmesser von 35mm oder 38mm. The adapter fi ts on stands with a tube diameter of 35 or 38mm Wind-up stands Lighting-Stands 539 Showtec