Deutsche Akkreditierungsstelle GmbH Anlage zur Akkreditierungsurkunde D-PL-19015-01-00 nach DIN EN ISO/IEC 17025:2005 Gültigkeitsdauer: 15.12.2014 bis 14.12.2019 Ausstellungsdatum: 15.12.2014 Urkundeninhaber: Deutsche Telekom Technik GmbH Zentralbetrieb Technik, Fixed Mobile Engineering Deutschland FMED-532 Protokolle, Services und Automatisierung Georg-Elser-Straße 6, 90441 Nürnberg Prüfungen in den Bereichen: : Zeichengabesystem Nr. 7 (MTP, ISUP, ), Signalisierung Voice Over IP (, to ISUP Interworking, ) Innerhalb der mit * gekennzeichneten Akkreditierungsbereiche ist dem Prüflaboratorium, ohne dass es einer vorherigen Information und Zustimmung der DAkkS bedarf, die Anwendung der hier aufgeführten genormten Prüfverfahren mit unterschiedlichen Ausgabeständen der Normen gestattet. Titel der Norm oder des s 1 ITU-T Q.701 ITU-T Q.702 (11.1988) ITU-T Q.703 Functional description of the Message Transfer Part (MTP) of System Signalling System No.7 MTP Level 2 und MTP Level 3 Signalling data link MTP Level 2 Signalling link MTP Level 2 ITU-T Q.706 Signalling System No.7 Message transfer part signalling performance MTP Level 2 und MTP Level 3 1 Im Titel des s sind Methode und Prüfgegenstand zu nennen Seite 1 von 6
ITU-T Q.781 (04.2002) ITU-T Q.704 ITU-T Q.705 ITU-T Q.707 (11.1988) ITU-T Q.782 (04.2002) ITU-T Q.711 (03.2001) ITU-T Q.712 ITU-T Q.713 (03.2001) ITU-T Q.714 (05.2001) ITU-T Q.786 DTAG_TZ_EK73_ (11.2012) ETSI ES 201 296 (04.2003) * ITU-T Q.118 (09.1997) ITU-T Q.761 ITU-T Q.762 Titel der Norm oder des s 1 MTP level 2 test specification MTP Level 2 Signalling network functions and messages Signalling System No.7 Signalling network structure Testing and maintenance MTP level 3 test specification Functional description of the signalling connection control part () Definition and function of messages Signalling connection control part formats and codes Signalling connection control procedures test specification Testspezification Connectionless Procedures Integrated Services Digital Network (ISDN); Signalling System No. 7 (SS7); ISDN User Part (ISUP); Signalling aspects of charging Abnormal conditions Special release arrangements ISDN user part functional description ISDN User Part general functions of messages and signals Gültigkeitsdauer: 15.12.2014 bis 14.12.2019 Ausstellungsdatum: 15.12.2014 Seite 2 von 6
ITU-T Q.763 ITU-T Q.764 ITU-T Q.765 (06.2000) Titel der Norm oder des s 1 ISDN user part formats and codes ISDN user part Signalling system No. 7 ISDN user part signalling procedures Application transport mechanism CCITT Q.767 (1991) Application of the ISDN User Part of CCITT Signalling System No. 7 for international ISDN interconnections ITU-T Q.765 bis ITU-T Q.784.1 ITU-T Q.784.3 ITU-T Q.730 ITU-T Q.731 ITU-T Q-731.7 (06.1997) CCITT Q.731.8 (02.1992) ITU-T Q.732.2-5 Application Transport Mechanism: Test Suite Structure and Test Purposes (TSS & TP) Test specification ISUP basic call test specification: Validation and compatibility for ISUP'92 and Q.767 protocols Test specification ISUP'97 basic call control procedures Test Suite Structure and Test Purposes (TSS & TP) ISDN user part supplementary services Number identification supplementary services using Signalling System No. 7: CLIP, CLIR, COLP, COLR Number identification supplementary services using Signalling System No. 7: Malicious call identification (MCID) Number identification supplementary services using Signalling System No. 7: Sub- Addressing (SUB) Call offering supplementary services using Signalling System No. 7: Call diversion services CFB, CFNR, CFU, CD Gültigkeitsdauer: 15.12.2014 bis 14.12.2019 Ausstellungsdatum: 15.12.2014 Seite 3 von 6
ITU-T Q.732.7 Titel der Norm oder des s 1 Call offering supplementary services using Signalling System No. 7: Explicit Call Transfer (ECT) CCITT Q.733 (1992) Call completion supplementary services using SS No.7 Section 1- Call Waiting (CW) ITU-T Q.733 ITU-T Q.733.3 (06.1997) ITU-T Q.733.5 ITU-T Q.734 ITU-T Q.734.2 ITU-T Q.735 ITU-T Q.737.1 (06.1997) ITU-T Q.785.2 (03.1999) IETF RFC 3261 (06.2002) ETS 102 027-1 V4.1.1 (07.2006) Call completion supplementary services using SS No.7: Clause 2 - Call hold (HOLD), Clause 4 - Terminal Portability (TP) Call completion supplementary services using Signalling System No. 7: Completion of calls to busy subscriber (CCBS) Call completion supplementary services using Signalling System No. 7: Completion of calls on no reply (CCNR) Multiparty supplementary services using Signalling System No.7: Clause 1 - Conference service (CONF) Multiparty supplementary services using Signalling System No. 7: Three party service (3PTY) Community of interest supplementary services using Signalling System No.7: Clause 1 - Closed User Group (CUG) Additional information transfer supplementary services using Signalling System No. 7: User-to-user signalling (UUS) Test specification ISUP'97 supplementary services Test suite structure and test purposes (TSS & TP) : Session Initiation Protocol Methods for Testing and Specification (MTS); Conformance Test Specification for (IETF RFC 3261) Part 1: Protocol Implementation Conformance Statement (PICS) proforma Gültigkeitsdauer: 15.12.2014 bis 14.12.2019 Ausstellungsdatum: 15.12.2014 Seite 4 von 6
ETS 102 027-2 V4.1.1 (07.2006) ETS 102 027-3 V4.1.1 (07.2006) ETSI TS 129 163 V8.20.0 (10.2012)* ETSI TS 102 710-1 V3.1.1 (05.2011)* ETSI TS 102 710-2 V3.3.1 (08.2013)* ETSI TS 124 229 V9.19.1 (04.2014)* Titel der Norm oder des s 1 Methods for Testing and Specification (MTS); Conformance Test Specification for (IETF RFC 3261) Part 2: Test Suite Structure and Test Purposes (TSS&TP) Methods for Testing and Specification (MTS); Conformance Test Specification for (IETF RFC 3261) Part 3: Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXIT) proforma Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; Interworking between the IP Multimedia (IM) Core Network (CN) subsystem and Circuit Switched (CS) networks (3GPP TS 29.163 version 8.20.0 Release 8) IMS Network Testing (INT); Interworking between the IP Multimedia (IM) Core Network (CN) subsystem and Circuit Switched (CS) networks (Release 8); Part 1: Protocol Implementation Conformance Statement (PICS) IMS Network Testing (INT); Interworking between the IP Multimedia (IM) Core Network (CN) subsystem and Circuit Switched (CS) networks (Release 8); Part 2: Test Suite Structure and Test Purposes (TSS&TP) Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; IP multimedia call control protocol based on Session Initiation Protocol () and Session Description Protocol (SDP); Stage 3 (3GPP TS 24.229 version 9.19.1 Release 9) to ISUP Interworking to ISUP Interworking to ISUP Interworking Gültigkeitsdauer: 15.12.2014 bis 14.12.2019 Ausstellungsdatum: 15.12.2014 Seite 5 von 6
ETSI TS 129 165 V9.17.0 (03.2014)* der Dt. Telekom V0.1.0 (12.2012) ETSI TS 101 553-1 V1.1.3 (05.2014)* ETSI TS 101 553-2 V3.1.5 (05.2014)* Titel der Norm oder des s 1 Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; Inter-IMS Network to Network Interface (NNI) (3GPP TS 29.165 version 9.17.0 Release 9) Unterarbeitskreis Signalisierung: Specification of the NGN-Interconnection Interface Technical Committee for IMS Network Testing (INT); Testing of the IBCF requirements; Part 1: Protocol Implementation Conformance Statement (PICS) Core Network and Interoperability Testing (INT); Testing of the IBCF requirements; Part 2: Test Suite Structure and Test Purposes (TSS&TP) Gültigkeitsdauer: 15.12.2014 bis 14.12.2019 Ausstellungsdatum: 15.12.2014 Seite 6 von 6