TÚYrcÐ 4.ERGÄNZUNG zur Bescheinigungsnummer: Gerät: Hersteller: Anschrift. Auftragsnummer: Ausstellungsdatum TÜV 99 ATEX 1408 I mpulsauswertegerät Typ KF**-D**-Ex*.* Pepperl + Fuchs GmbH Lilienthalstrasse 200 68307 Mannheim Deutschland 8000414255 06 01 2015 Anderungen: Das Gerät darf künftig auch entsprechend den im Prüfbericht aufgelisteten Unterlagen gefertigt und betrieben werden. Die Anderungen betreffen den Austausch einiger Bauteile des Gerätes. Weiterhin wurden die zur Beurteilung herangezogenen Normen aktualisiert. Das Gerät incl. dieser Ergänzung erfüllt die Anforderungen der folgenden Normen: EN 60079-0:20'12 EN 60079-11:2012 EN 60079-26:2007 Die Kennzeichnung lautet wie folgt: @ I (1) c [Ex ia Ga] lc bzw ll (1) D [Ex ia Da] lllc bzw l(m1)[ex ia Ma] I Technische Daten Zulässiger Umgebungstemperaturbereich: -20 "C bis +60 'C Ve rso rg u n g sstro m kre is (Klemmen 23,24) U U oder =20..30 VDC,U,= 40V =20 90 vdc,u,= 253V 48 253 V AC (KFD2) (KFU8) U 115VAC, U,= 126,5V (KFAs) U 230VAC, U'= 253 V (KFA6) oder über Power Rail (Klemmen PR: '1, 2) U 20.. 30 V DC, U, = 40 V (nur KFD2) P1 7-F-006 06-06 Seite 1/3
fiiytúoð 4. Ergänzung zur Bescheinigung Nummer TÜV 99 ATEX '1408 Kontaktstromkreise (Klemmen 10, 11, 12 und 16, 17,18) Transistorausgänge (Klemmen 19,20) Wechselspannung U = 253 VAC 2A Un. = 253V u, 40v Gleichspannung U= l= Ur= 40v 2A 253 V Steuereingang (Klemmen 13, 14) Schnittstelle R5485 (Klemmen PR: 3, 5) Summenfehler (Klemme PR: 4) um um um 40v 40v 40v Eingangsstromkreise (Klemmen 1, 3) in Zündschutzart Eigensicherheit Ex ia llc, Ex ia lllc oder ExialExial Höchstwerte: Uo= 10,1 V lo = '13,5 ma Po= 34mW Kennlinie: linear Wirksame innere lnduktivität Wirksame innere Kapazität: Li = vernachlässigbar klein vernachlässigbar klein Ex ia llc Ex ia llb bzw. lllc Ex ia lla Exial Lo 195 mh 730 mh 1000 mh 1000 mh co 2,87 tf 19,4 rf 93 tf 79 rf Die vorgenannten Höchstwerte der äußeren Reaktanzen gelten nur, wenn das gleichzeitige Auftreten von äußerer lnduktivität und Kapazität nicht betrachtet werden muss. Bei gleichzeitigem Auftreten von Kapazität und lnduktivität in konzentrierter Form sind die höchstzulässigen Werte der folgenden Tabelle zu entnehmen: Ex ia llc Ex ia llb bzw. lllc Ex ia lla Exial Lo 5mH 10 mh 20 mh 20 mh co 0,4 pf 1,5 1.rF 3,0 pf 3,0 rf Die eigensicheren Eingangsstromkreise sind von allen anderen Stromkreisen bis zu einem Scheitelwert von 375 V sicher galvanisch getrennt. Seite 2/3
T.IYIItr- 4. Ergänzung zur Bescheinigung Nummer füv gg ATEX 1408 (16) Die Prüfungsunterlagen sind im Prüfbericht Nr. 15203110833 aufgelistet. (17) Besondere Bedingungen keine (18) Grundlegende Sicherheits- und Gesundheitsanforderungen keine zusätzlichen TÜV NORD CERT GmbH, Langemarckstraße 20, 45141 Essen, benannt durch die Zentralstelle der Länder für Sicherheitstechnik (ZLS), ldent. Nr.0044, RechtsnachfolgerderTÜV NORD CERTGmbH & Co. KG ldent. Nr 0032 Der Leiter der nnten Stelle Andreas Meyer Geschäftsstelle Hannover, Am TUV 1,30519 Hannover, Tel : +49 (0) 511 986-1455, ; +49 (0) 511 986-1590 Seite 3/3
TúYTOÐ Translation 4.SUPPLEMENT to Certificate No. Equipment: Manufacturer. Address: Order number: Date of issue: TUV 99 ATEX 1408 lmpulse Evaluating Device type KF**-D**-Ex*.* Pepperl + Fuchs GmbH Lilienthalstrasse 200 68307 Mannheim Germany 8000414255 20'15-0'l-06 Amendments: ln the future the device may also be manufactured and operated according to the test documents listed in the test repoft. The changes concern the exchange of some components of the device, Furthermore the standards used for assessment had been updated. The equipment incl. of this supplement meets the requirements of these standards: EN 60079-0:2O12 EN 60079-11:.2012 EN 60079-26:2007 The marking is as follows. @ r (1) c [Ex ia Ga] rc ll (1)D [Ex ia Da] lllc resp. resp. I (M1) [Ex ia Ma] I Technical data Permissible range of the ambient temperature: -20'C to +60 'C Supply circuit (terminals 23,24) U =20..30 Vd.c.,U,= 40V U or = 20.. 90 V d.c., U, = 48..253 V a.c. 253 V (KFD2) (KFU8) U 1 15 V a.c., U, = 1265V (KFA5) U 230 V a.c., U, = 253 V (KFA6) or via Power Rail (terminals PR: 1, 2) U 20.. 30 V d.c., U'= 40 V (only KFD2) P17-F-016 06-06 page 1/3
T.ilfØP 4. Supplement to Certificate No. TUV 99 ATEX 1408 Contact circuits (terminals 10, 11, 12 and 16, 17, 18) Transistor outputs (terminals 19,20) Control input (terminals 13, 14) alternating voltage U = 253Va.c = 2A Ur um = 253V 40v u, 40v direct voltage U= l= Ur= 40v 2A 253V lnterface RS485 (terminals PR: 3, 5) um 40v Sum error (terminal PR: 4) lnput ciruits (terminals '1, 3) u, 40v in type of protection,,lntrinsic Safety" Ex ia llc, Ex ia lllc or Ex ia I Maximum values: Uo= 10.'1 V lo = 13.5 ma Po= 34 mw Characteristic line: linear Effective internal inductancer L = negligibly small Effective internal capacitance: Ci = negligibly small Ex ia llc Ex ia llb resp. lllc Ex ia lla Exial Lo '195 mh 730 mh 1000 mh 1000 mh co 2.87 tf 19.4 tf 93 rf 79 pf The above mentioned values of the outer reactance apply only on condition that simultaneous appearance of the outer inductance and capacitance does not need to be considered. ln case of simultaneous appearance of capacitance and inductance in concentrated form the permissible maximum values have to be taken from the following table: Ex ia llc Ex ia llb resp. lllc Ex ia lla Exial Lo 5mH 10 mh 20 mh 20 mh co 0.4 pf 1.5 rf 3.0 pf 3.0 rf The intrinsically safe input circuits are safely galvanically separated from other circuits up to a peak crest value of the voltage of 375 V. page 2/3
TúYTfffi- 4. Supplement to Certificate No. TÜV 99 ATEX 1408 (16) The test documents are listed in the test report No. 15 203'1'10833 (17) Special conditions for safe use none (18) Essential Health and Safety Requirements no additional ones TÜV NORD CERT GmbH, Langemarckstraße 20, 45141 Essen, notified by the central office of the countries for safety engineering (ZLS), ldent. Nr. 0044, legal successor of the TÜV NORD CERT GmbH & Co. KG ldent. Nr 0032 The head of th otified body reas Meyer Hanover office, Am TÜV 1, 305'19 Hanover, Tel.: +49 (0) 51'l 986-1455, Fax: +49 (0) 511 986-1590 page 3/3