Stanztechnik Pess Tools Fomenbau Stanztechnik 1 Stanztechnik Mould Pess Components Pess Tools Tools
Inhalt / Contents Stanztechnik Pess Tools 1 1.2-1.3 Schneidstempel DIN 91, Fom DA / Punch DIN 91, type DA 1X.Ø.Länge / length 1.4-1. Schneidstempel DIN 91, Fom D / Punch DIN 91, type D 11X.Ø.Länge / length 1. Schneidstempel DIN 91, Fom CA / Punch DIN 91, type CA 114X.Ø.Ø.Länge / length 1.9 Schneidstempel DIN 91, Fom C / Punch DIN 91, type C 1X.Ø.Ø.Länge / length 1.1 Schneidstempel DIN 91, Fom C mit undem ode viekant - Ansatz Punch DIN 91, type C with ound o squae base 1.11 Fomschneidstempel, Fom DA Foming Punch, type DA 1.12 Schneidstempel mit Posaunenhals, Fom DA 27X.Ø.Länge / length Bottle-neck punch, type DA 1. Schneidstempel mit Posaunenhals, Fom D 27X.Ø.Länge / length Bottle-neck punch, type D 1.14 Zapfensenke 2793.Ø Countesink tool 1.1 Schneidstempel DIN ISO 2 Fom A 211X.Ø.Länge / length Punch DIN ISO 2 type A 1. - 1.17 Schneidstempel DIN ISO 2, Fom A Hatmetall 21.Ø.Länge / length Punch DIN ISO 2, type A tungsten cabide 1.1 Schneidstempel DIN ISO 2, Fom B 21X.Ø.Ø.Länge / length Punch DIN ISO 2, type B 2X.Ø.Ø.Länge / length 214X.Ø.Ø.Länge / length 1.19-1.2 Schneidstempel DIN ISO 2, Fom CS / CR / CO / Punch DIN ISO 2, type CS / CR / CO 1.22 Schneidstempel DIN ISO 2, Fom E /Punch DIN ISO 2, type E 2X.Ø.Länge / length 1.23 Schneidstempel DIN ISO 2, Fom F 217X.Ø.Ø.Länge / length Punch DIN ISO 2, type F 21X.Ø.Ø.Länge / length 219X.Ø.Ø.Länge / length 1.24-1.2 Schneidstempel DIN ISO 2, Fom GS / GR / GO / Punch DIN ISO 2, type GS / GR / GO 1.2 Schneidstempel mit zyl. Kopf, Fom EA 2.Ø.Länge / length Punch with cylindical head, type EA 1.27 Schneidstempel mit zyl. Kopf, Fom EB 223.Ø.Ø.Länge / length Punch with cylindical head, type EB 1.2-1.29 Schneidstempel mit zyl. Kopf, Fom ECS / ECR / ECO Punch with cylindical head, type ECS / ECR / ECO 1.3 Schneidstempel DIN 91, Fom B 112X.Ø.Länge / length Punch DIN 91, type B 1.31 Schneidstempel mit 3 Kopf, Fom D X.Ø.Länge / length Punch with 3 head, type D 1.32 Schneidbuchsen DIN 94, Fom A / Fom B A = 1.Ø.Länge / length Die DIN 94, type A / type B B = 123.Ø.Länge / length 1.33 Schneidbuchsen aus Hatmetall DIN 94, Fom A 1.Ø.Länge / length Tungsten cabide Die DIN 94, type A 1.34 Schneidbuchsen ISO 977, Fom A / Fom B A = 2.Ø.Ø.Länge / length Die ISO 977, type A / type B B = 223.Ø.Ø.Länge / length 1.3 Schneidbuchsen mit Statloch ISO 977, Fom A / Fom B A = 23.Ø.Länge / length Die ISO 977 with state hole, type A / type B B = 293.Ø.Länge / length 1.3-1.37 Fomschneidbuchsen mit Bund ISO 977 Foming die with head ISO 977 1.3 Stempelfühungsbuchsen DIN 94, Fom C 411.Ø Punch guide bush DIN 94, type C 1.39 Stempelfühungsbuchsen ISO 97 312.Ø.Ø Punch guide bush ISO 97 Die 4. Stelle de Atikelnumme bezeichnet den Wekstoff, siehe Registeblatt. The 4th. digit of the item no. indicates the mateial, see index.
Schneidstempel mit kegeligem Kopf Punch with countesunk head nach DIN 91 Tei, Fom DA acc. to DIN 91 standad pat 1, type DA Detail Y Atikel-N.: 1. Die 4. Stelle de At. N. bezeichnet den Wekstoff siehe Seite 1.1 Item no.: 1. The 4th digit of the item no. indicates the mateial, see page 1.1 Wekstoffe: WS, HSS Weitee Wekstoffe auf Anfage ehältlich. Siehe Seite.9.1 Mateials: WS, HSS Fo othe mateials see page.9.1 d 3 h l 2 d 3 h l 2 h +, ±, +,2, 71,9,, 71 1 1,1,3,7 71 1 1,3 d,72, 71 1 1,4 1 +,2,92, 71 1,4,,9 71 1 1, 1,1 1, 71 1 1, 1,19 1,1 71 1 1, 1,11 1,2 71 1 2, 1,19 1,3 71 1 2, 1,11 1,4 71 1 2,2 1,19 1,4 71 2,2 +,3 1,1 1, 71 1 2,2 1,11 1, 71 1 2, 1,2 1,7 71 1 2, 1,19 1, 71 1 2, 1,37 1,9 71 1 2, 1,2 h +, ±,1 +,2 max 2, 71 1 3, 1,37 2,1 71 1 3,2 1,4 2,2 71 1 3,2 1,37,2+,2 2,3 71 1 3, 1,4 2,3 711 3, 1, 2,4 71 1 3, 1,4 2, 71 1 3, 1,37 2, 71 1 4, 1,71 2, 71 4, +,3 1,7 2,7 71 1 4, 1,3 2, 4, 1,4,4 +,3 2, 71 4, 1, 2,9 71 1 4, 1,4 2,9 2,9 4, 1,41 3, 71 4, 1, 1 3,1 4, 1,71 3,1 71 4, 1,7 max,4 +,3, +,4 Zwischenmaße: Viele Abmessungen in DA-WS ab Lage liefeba. Detailliete Vefügbakeit siehe Peisliste. In begenztem Umfang in DA-HWS ab Lage liefeba. Intemediate dimensions: Many dimensions in DA-WS ae also available fom stock. Please take ou pice list fo a detailed availability. Available in DA-HWS only while stocks last. 1.2 7. Änd. Juli 29. el. May 211
Schneidstempel mit kegeligem Kopf Punch with countesunk head nach DIN 91 Tei, Fom DA acc. to DIN 91 standad pat 1, type DA Wi übe uns About Us h 1.3 +, 4. Änd. Juli 29. el. May 211 ±,1 d 3 h +,2 l 2 max 3,2 71 1 4, 1,3 3,3 71 1 4, 1,4 3,4 71 1 4, 1,4 3,4 4, 1,41 3, 71 1, 1, 3, 1, 1,7 3, 71 1, 1,71 3,, 1,7 3,7 71 1, 1,3 3,7, 1, 3, 71 1, 1,4 3,, 1, 3,9 71 1, 1,4 4, 71 71 1, 1, 4,1 71 1, 1,71 4,1 1, d 1,7 4,2 71 1, 1 +,3 1,3 4,2, 1, 4,3 71 1, 1,4 4,4 71 1, 1,4 4, 71 1, 1, 4, 71 1, 1,71 4,7 71 1, 1,3 4, 71 1, 1,4 4,9 71 1, 1,4, 71 1, 1,,1 71 1, 1,71,2 71 1, 1,3,3 1, 1,4,4 1, 1,4, 71 1 7, 1,, 71 1 7, 1,71, +,4 h +, ±,2 d 3 h +,2, 71 1, 2,23,1 71 1, 2,1,2, 2,,3 71, 1,97,4 71, 1,9, 71 1 9, 3,17,7 71 9, 2,99,9 71 9, 2,2 7, 71 1 9, 2,73 7,3 71 9, 2,47 7,4 71 9, 2,39 7, 71 1 1, 3,17 7, 71 1, 3, 7,7 71 1, 2,99, 71 1 1, 2,73,4 71 1, 2,39, 71 1 11, 3,17,7 71 11, 2,99,7 71 11, 2,9, 71 11, 2,91,9 71 11, +,4 2,2 9, 71 1 11, 2,73 9,2 11, 2,2 9,3 71 11, 2,47 9,4 71 11, 2,39 9,7 71 12, 2,99 9, 71 12, 2,91 9,9 71 71 12, 2,2 1, 71 1 12, 2,73 1, 71, 3,17 1, 71, 3, 11, 71 1, 2,73 11, 71 14, 3, 11, 14, 2,91 12, 71 1 14, 2,73 12,1 71 14, 2, 12,3 71 14, 2,47 12, 71 1, 3,17 14, 71 1, 3,23 14,9 17, 3,32, 71 1 1, 3,23 Detailliete Aufstellung siehe Peisliste. Fo a detailed availability please have a look into ou pice list. l 2 max 1 12 1, +, 1, +, Peisliste Technische Hinweise Umfomtechnik Voichtungsbau Fomenbau Stanztechnik Fomenbau Technical notes 4 Foming Foming Tools Tools 3 Fixtues 2 1 Pice list Mould Components Mould Pess Components Tools
Schneidstempel mit kegeligem Kopf Punch with countesunk head nach DIN 91 Tei, Fom D, ähnlich ISO 72 acc. to DIN 91 standad pat 1, type D, simila to ISO 72 Atikel-N.: 11. Die 4. Stelle de At. N. bezeichnet den Wekstoff siehe Seite 1.1 Item no.: 11. The 4th digit of the item no. indicates the mateial, see page 1.1 Wekstoffe: HWS, HSS, Vanadis 23, CPM 1V Weitee Wekstoffe auf Anfage ehältlich. Siehe Seite.9.1 Mateials: HWS, HSS, Vanadis 23, CPM 1V Fo othe mateials see page.9.1 h h h h +, ±, +,2,3 71,9,72,3 71,9,,4 71,9,3,4,9,9, 71 1,9,, 71 1 1,,9, 71 1 1,1,3, 71 1 1,2,,7 71 1 1,3,72 71,7 71 1 1,3,, 71 1 1,4,92, 71 1 1,4,,9 71 1 1, 1,1,9 71 1 1,,9 h +, ±, +,2 1, 71 1 1, 1,19 1, 71 1, 1,1 1,1 71 1 1, 1,11 1,1 71 1 1, 1, 1,2 71 1 2, 1,19 1,2 71 2, 1,1 1,3 71 1 2, 1,11,2 +,2 71,4 +,3 1,3 71 1 2, 1, 1,4 71 1 2,2 1,19 1,4 71 2,2 1,1 1, 71 1 2,2 1,11 1, 71 2,2 1, 1, 71 1 2, 1,2 1, 71 2, 1,24 h +, ±, +,2 1,7 71 1 2, 1,19 1,7 71 2, 1,1 1, 71 1 2, 1,37 71 1, 71 2, 1,32 1,9 71 1 2, 1,2 1,9 71 2, 1,24,4 +,3 Detailliete Vefügbakeit siehe Peisliste. Längen: In begenztem Umfang sind auch die Längen und 9 mm ab Lage liefeba. Please have a look into ou pice list fo a detailed availability. Lengths: The lengths and 9 mm ae also available in limited numbes fom stock. 1.4. el. May 211
Schneidstempel mit kegeligem Kopf Punch with countesunk head nach DIN 91 Tei, Fom D, ähnlich ISO 72 acc. to DIN 91 standad pat 1, type D, simila to ISO 72 Wi übe uns About Us h h h h +, ±,1 +,2 2, 71 1 u.12 3, 1,37 2, 71 1 3, 1,32 2,1 71 1 3,2 1,4 2,1 71 3,2 1,41 2,2 71 1 3,2 1,37 2,2 71 3,2 1,32 2,3 71 1 3, 1,4 2,3 71 3, 1, 2,4 71 1 3, 1,4 2,4 71 3, 1,41 2, 71 1 3, 1,37 2, 71 1 3, 1,32 2, 71 1 4, 1,71 2, 71 4, 1,7 2,7 71 1 4, 1,3 2,7 1 4, 1, 2, 71 1 4, 1,4 2, 71 4, 1, 2,9 71 1 4, 1,4 2,9 71 4, 1,41 3, 71 1 u.12 4, 1, 3, 71 1 4, 1,7 3,1 71 1 4, 1,71 3,1 71 4, 1,7 3,2 71 1 4, 1,3 3,2 71 1 4, 1, 3,3 71 1 4, 1,4 3,3 71 4, 1, 3,4 71 1 4, 1,4 3,4 71 1 4, 1,41 3, 71 1 u.12, 1, 3, 71 1, 1,7 3, 71 1, 1,71 3, 71, 1,7 3,7 71 1, 1,3 3,7 71 1, 1, 3, 71 1, 1,4 3, 71, 1, 3,9 71 1, 1,4 3,9 71, 1,41 4, 71 1 u.12, 1, 4, 71 1, 1,7 4,1 71 1, 1,71 4,1 71 1, 1,7 4,2 71 1, 1,3 4,2 71 1, 1, 4,3 71 1, 1,4 4,3 71, 1, 4,4 71 1, 1,4 4,4 71 1, 1,41 4, 71 1, 1, 4, 71 1, 1,7 4, 71 1, 1,71 4, 71 1, 1,7 4,7 71 1, 1,3 4,7 71, 1, 4, 71 1, 1,4 4, 71, 1, 4,9 71 1, 1,4 4,9 71, 1,41, 71 1 u.12, 1,, 1, 1,7 1.. el. May 211,4 +,3, +,4 h +, ±,1 +,2,1 71 1, 1,71,1 71, 1,7,2 71 1, 1,3,3 71 1, 1,4,4 71 1, 1,4,4, 1,41 71, 71 1 u.12 7, 1,, 71 1 7, 1,71,7 71 1 7, 1,3,7 71 7, 1,, 71 1 7, 1,4,9 71 1 7, 1,4 h +, ±,2, 71 1,12, 2,23, 71 1, 2,19,1 71 1, 2,1,2 71 1, 2,,3 71 1, 1,97,4 71 1, 1,9, 71 1 9, 3,17, 71 1 9, 3,,7 71 1 9, 2,99, 71 1 9, 2,91,9 71 1 9, 2,2 7, 71 1 u.12 9, 2,73 7,1 71 1 9, 2, 7,2 71 1 9, 2, 7,2 71 9, 2,2 7,3 71 1 9, 2,47 7,4 71 1 9, 2,39 7, 71 1 u.12 1, 3,17 7, 71 1 1, 3, 7,7 71 1 1, 2,99 7, 71 1 1, 2,91 7,9 71 1 1, 2,2, 71 1,12 1, 2,73,1 71 1 1, 2,,2 71 1 1, 2,,3 71 1 1, 2,47,4 71 1 1, 2,39, 71 1 u.12 11, 3,17, 71 1 11, 3,,7 71 1 11, 2,99, 71 1 11, 2,91,9 71 1 11, 2,2 9, 71 1 u.12 11, 2,73 9, 71 11, 2,9 9,1 71 1 11, 2, 9,2 71 1 11, 2, 9,3 71 1 11, 2,47 9,4 71 1 11, 2,39 9, 71 1 12, 3,17 9, 71 1 12, 3, 9,7 71 1 12, 2,99 9, 71 1 12, 2,91 9,9 71 1 12, 2,2 h +,2, +,4 1, +, h +, ±,2 +,2 1, 71 1,12 12, 2,73 1,1 71 1 12, 2, 1,2 71 1 12, 2, 1,3 71 1 12, 2,47 1,4 71 1 12, 2,39 1, 71 1,12, 3,17 1, 71 1, 3, 1,7 71 1, 2,99 1, 71 1, 2,91 1,9 71 1, 2,2 11, 71 1 u.12, 2,73 11,1 71 1, 2, 11,2 71 1, 2, 11,3 71 1, 2,47 11,4 71 1, 2,39 11, 71 1 14, 3,17 11, 71 1 14, 3, 11,7 71 1 14, 2,99 11, 71 1 14, 2,91 11,9 71 1 14, 2,2 12, 71 1,12 14, 2,73 12,1 71 1 14, 2, 12,2 71 1 14, 2, 12,3 71 1 14, 2,47 12,4 71 1 14, 2,39 12, 71 1 1, 3,17 12, 71 1 1, 3, 12,7 71 1 1, 2,99 12, 71 1 1, 2,91 12,9 71 1 1, 2,2, 71 1 1, 2,73, 71 1, 3,7 14, 71 1 u.12, 3,23 14, 71 1 17, 3,7 1, 71 1 17, 3,23 1, 71 1 1, 3,7, 71 1 1, 3,23, 71 1 19, 3,7 17, 71 1 19, 3,23 17, 71 1 2, 3,7 1, 71 1 2, 3,23 1, 71 1 21, 3,7 19, 71 1 21, 3,23 19, 71 1 22, 3,7 2, 71 1 u.12 22, 3,23 1, +, 1, +, Detailliete Aufstellung siehe Peisliste. Please have a look into ou pice list fo a detailed availability. Peisliste Technische Hinweise Umfomtechnik Voichtungsbau Fomenbau Stanztechnik Fomenbau Technical notes 4 Foming Foming Tools Tools 3 Fixtues 2 1 Pice list Mould Components Mould Pess Components Tools
Hatmetallschneidstempel mit kegeligem Kopf Tungsten Cabide punch with countesunk head ähnlich DIN 91, Tei, Fom D und ISO 72 simila to DIN 91 standad pat 1, type D and ISO 72 Atikel-N.: 11. Item no.: 11. Ausfühung: Wekstoff: Wi liefen die gelötete Ausfühung. Spezialanfetigungen aus dem Vollen auf Anfage. Maktübliches Hatmetall Vesion: Mateial: Nomally we delive the bazed vesion. Custom pats fom solid mateial upon equest. Othe lengths upon equest. Commecially available Tungsten Cabide h h h 1, 1,1 1,2 1,3 1,4 1, 1, 1,7 1, 1,9 2, 2,1 2,2 2,3 2,4 2, 2, 2,7 2, 2,9 3, 3,1 3,2 3,3 3,4 +, 71 ±, 1, 2, 2,2 2, 2, 3, 3,2 3, 4, 4, +,2 1,19 1,11 1,19 1,11 1,19 1,11 1,2 1,19 1,37 1,2 1,37 1,4 1,37 1,4 1,4 1,37 1,71 1,3 1,4 1,4 1, 1,71 1,3 1,4 1,4,4 +,3, +,4 h 3, 3, 3,7 3, 3,9 4, 4,1 4,2 4,3 4,4 4, 4, 4,7 4, 4,9,,,, 7, 7,, 9, 1, +, 71 ±,,,,, 7,, 9, 1, 11, 12, +,2 1, 1,71 1,3 1,4 1,4 1, 1,71 1,3 1,4 1,4 1, 1,71 1,3 1,4 1,4 1, 1, 2,23 3,17 2,73 3,17 2,73 2,73 2,73, +4 1, +, Andee Längen und Duchmesse auf Anfage. Othe dimensions and lengths upon equest. 1. 7. el. May 211
Schneidstempel mit kegeligem Kopf Punch with countesunk head mit abgesetztem Schaft bis, mm Schneidduchmesse, nach DIN 91 Teil 2, Fom CA and stepped shaft to. mm cutting diamete acc. to DIN 91 standad pat 2, type CA Detail X Detail Y Atikel-N.: 114. Die 4. Stelle de At. N. bezeichnet den Wekstoff siehe Seite 1.1 Item no.: 114. The 4th digit of the item no. indicates the mateial, see page 1.1 Wekstoffe: WS, HSS Weitee Wekstoffe auf Anfage ehältlich. Siehe Seite.9.1 Mateials: WS, HSS Fo othe mateials see page.9.1 übe above h bis to Stufung Gadation +, d 3 h Tol. d 4 l 2 +, l 3 max h +,2,, 1, 2, 1,4 1,9 2,9 3,,1 71 2,2 3, 4,, ±, ±,1 1, 2 3 4 d 3 +,3 7 1,11 1,37 1,,4 +,3, +,4 3, 4, 4,,,,, ±,2 1 2,23 1, +, Vozugsgößen. Nu in begenztem Umfang in HWS liefeba. Pefeed dimensions. In HWS only available in limited numbes fom stock. 1. 4. el. July 29
Schneidstempel mit kegeligem Kopf Punch with countesunk head mit abgesetztem Schaft bis, mm Schneidduchmesse, nach DIN 91 Teil 2, Fom C ähnlich ISO 911 and stepped shaft to. mm cutting diamete acc. to DIN 91 standad pat 2, type C simila to ISO 911 Wi übe uns About Us Atikel-N.: 1. Die 4. Stelle de At. N. bezeichnet den Wekstoff siehe Seite 1.1 Wekstoffe: übe above 1.9,, 1, 3, 4,, h bis to 1,4 1,9 2,9 3, 4,, Vozugsgößen. 3. el. July 29 HWS, HSS, Vanadis 23, CPM 1V Weitee Wekstoffe auf Anfage ehältlich. Siehe Seite.9.1 Stufung Gadation,1, 71 +, 2,2 3, 4,,,, d 3 Tol. ±, ±,1 ±,2 Item no.: 1. The 4th digit of the item no. indicates the mateial, see page 1.1 Mateials: h 1, 2 3 4 l 2 +, 7 1 Pefeed dimensions. Detail X HWS, HSS, Vanadis 23, CPM 1V Fo othe mateials see page.9.1 h +,2 1,11 1,37 1, 2,23,4 +,3, +,4 1, +, Peisliste Technische Hinweise Umfomtechnik Voichtungsbau Fomenbau Stanztechnik Fomenbau Technical notes 4 Foming Foming Tools Tools 3 Fixtues 2 1 Pice list Mould Components Mould Pess Components Tools
Schneidstempel mit kegeligem Kopf Punch with countesunk head ähnlich DIN 91 Teil 2, Fom C, mit undem ode Viekant-Ansatz, ähnlich ISO 911 simila to DIN 91 standad pat 2, type C with ound o squae base, simila to ISO 911 with squae base All aound with ound base Wekstoffe: HWS, HSS, Vanadis 23, CPM 1V Weitee Wekstoffe auf Anfage ehältlich. Siehe Seite.9.1 Mateials: HWS, HSS, Vanadis 23, CPM 1V Fo othe mateials see page.9.1 h a ±,1 Nach Wahl des Bestelles! At customes equest! b ±,1 4,,,, 9, 1, 12, 14,, 1, 22, Tol. ±,1 ±,2 d 3 h 3, 4,,, 7,, 1, 12, 14,, 2, h +,2 1, 1, 1, 2,23 2,73 2,73 2,73 2,73 3,23 3,23 3,23, 1, 1, l 2 +, +, +,4 +, +, Vozugslänge = 71/ un mm Weitee Längen: und 9 mm Pefeed length = 71/ an mm Futhe lengths: and 9 mm Nach Wahl des Bestelles! At custome s equest! Detailliete Vefügbakeit siehe Peisliste. Please have a look into ou pice list fo a detailed availability. 1.1 2. el. July 29
Fomstempel mit gestauchtem Kopf Foming punch with foged head Fom DA type DA Wi übe uns About Us Wekstoff: 1.11 3. el. July 29 HSS Wi fetigen auch Quadatlochstempel mit undem Kopf. a ±.1 2 2.1 2.2 2.3 2.4 2. 2. 2.7 2. 2.9 3 3.1 3.2 3.3 3.4 3. 3. 3.7 3. 3.9 4 4.1 4.2 4.3 4.4 b ±.1 h +.2 1.37 1.4 1.37 1.4 1.4 1.37 1.71 1.3 1.4 1.4 1. 1.71 1.3 1.4 1.4 1. 1.71 1.3 1.4 1.4 1. 1.71 1.3 1.4 1.4 all aound *Kante geundet ode Fläche vom Umfomen +. Fomschneidstempel weden nicht lagemäßig gefüht, können jedoch kuzfistig hegestellt weden. * *Edge ounded o thee will be a flat due to the foming Mateial: HSS We also manufactue squae hole punches with ound head. a ±.1 4. 4. 4.7 4. 4.9.1.2.3.4...7..9. 7 7.. 9 1 11 12 b ±.1 h +.2 1. 1.71 1.3 1.4 1.4 1. 1.71 1.3 1.4 1.4 1. 1.71 1.3 1.4 1.4 2.23 3.17 2.73 3.17 2.73 3.17 2.73 2.73 2.73 2.73 +. Foming punches ae not ex-stock; they can be poduced at shot notice. Peisliste Technische Hinweise Umfomtechnik Voichtungsbau Fomenbau Stanztechnik Fomenbau Technical notes 4 Foming Foming Tools Tools 3 Fixtues 2 1 Pice list Mould Components Mould Pess Components Tools
Schneidstempel mit Posaunenhals Bottle-neck punch Fom DA type DA Folded max. +,4 Atikel-N.: 27. Die 4. Stelle de At. N. bezeichnet den Wekstoff siehe Seite 1.1 Wekstoffe: HSS Weitee Wekstoffe auf Anfage ehältlich. Siehe Seite.9.1 Häte: Schaft: HRC 4 ± 2 Kopf: HRC ± Item no.: 27. The 4th digit of the item no. indicates the mateial, see page 1.1 Mateials: HSS Fo othe mateials see page.9.1 Hadness: Shaft: HRC 4 ± 2 Head: HRC ± h Stufung Gadation +,,2 k +,2 a d 3,2 h Stufung Gadation +,,2 k +,2 a d 3,2 2, 3, 7, 11, 12, 2,1 2,3 2, 3, 3, 4,,1 71/ / 3,2 3, 4, 4,,, 3, 1, ±,1 3,,,,, 9, 1, 1, 11, 12,,, 71/ / 1, 14, 1,, 4, 1, ±,2 1, 4, 1,, 7, 4, 1,,, 1,,,, 9, 1, 12, Detailliete Vefügbakeit siehe Peisliste. Please have a look into ou pice list fo a detailed availability. 1.12. el. July 29
Schneidstempel mit Posaunenhals Bottle-neck punch Fom D type D Wi übe uns About Us Atikel-N.: 27. Die 4. Stelle de At. N. bezeichnet den Wekstoff siehe Seite 1.1 Wekstoffe: 1. h 2, 2,1 2,3 2, 3, 3, 4, 4,,,,, 7, Stufung Gadation,1, 7. el. May 211 HSS Weitee Wekstoffe auf Anfage ehältlich. Siehe Seite.9.1 Häte: Schaft: HRC 4 ± 2 Kopf: HRC ± +, 71/ / 1/ 11/ 12,2 3, 3,2 3, 4, 4,,,, 7,, 9, 1, 11, k +,2 3, a d 3 1, 4, 1, ±,1,2 3,,,, 1, 12, Die angegebenen Längen sind nicht in allen Duchmessen vefügba. Detailliete Vefügbakeit siehe Peisliste. Item no.: 27. The 4th digit of the item no. indicates the mateial, see page 1.1 Mateials: h Stufung Gadation HSS Fo othe mateials see page.9.1 Hadness: Shaft: HRC 4 ± 2 Head: HRC ± +,,2 k +,2 a d 3,2, ab 9, bis 1,, 14, ab 1,, bis 11, ab 11, bis 12, 71/ 1,,, / 17, 14, 1, 1/ 4, 1, 1, 14, 19, 11/ 1, 19,, 12 2, 17, 1, 19, 2, 22, 2, 1, 21, 22, 23, 2, 27, 3, The lengths ae not available in all diametes. Please have a look into ou pice list fo a detailed availability. ±,2 Peisliste Technische Hinweise Umfomtechnik Voichtungsbau Fomenbau Stanztechnik Fomenbau Technical notes 4 Foming Foming Tools Tools 3 Fixtues 2 1 Pice list Mould Components Mould Pess Components Tools
Zapfensenke mit dei Schneiden Countesink tool with thee side-timme fü Schneidstempel mit Posaunenhals fo bottle-neck punch L 3 Atikel-N.: 2793.. D Item no.: 2793.. D Ausfühung: Gehätet, angelassen, und geschliffen Vesion: Hadened, tempeed, and gound finished Wekstoff: HSS Mateial: HSS d 3 l 3 d 3 l 3 f7 2, 2,1 2,3 h 3,3 3, 3, h11 +,2 3,., f7, 9, 1, h, 14, 1, h11 +,2 12, 2, 3, 4,3 4,9, 7, 11, 12,, 17, 1 3, 4, 4,,4,9,4 =,,, 14, 1, 1, 19, 2, 1, 1,,,, 7,4, 9, 1, 1,, 17, 1, 21, 22, 23,, 7, 1, 11, 1 12, 12, 19, 2, 2, In begenztem Umfang sind auch Zapfensenke mit eine Schneide ab Lage liefeba. One-side-timme ae also available in limited numbes fom stock. 1.14 4. el. May 211
Schneidstempel mit zylindischem Kopf Punch with cylindical head ähnlich DIN ISO 2 Fom A simila to DIN ISO 2 standad type A Wi übe uns About Us Atikel-N.: 211. Die 4. Stelle de At. N. bezeichnet den Wekstoff siehe Seite 1.1 Wekstoffe: 1.1 m 3* 4* 1 2 2 32 9. el. July 29 HWS, HSS, Vanadis 23, CPM 1V Weitee Wekstoffe auf Anfage ehältlich. Siehe Seite.9.1,1 9 11 19 23 2 3 T +,2 +,1 3 +,1 +,1,2,3,4 = Vozugsgößen * Auf Wunsch in HSS mit Kopfhöhe mm liefeba. Detailliete Vefügbakeit siehe Peisliste. +, +,2 3 71 9 1 12 * * * * Item no.: 211. The 4th digit of the item no. indicates the mateial, see page 1.1 Mateials: * * HWS, HSS, Vanadis 23, CPM 1V Fo othe mateials see page.9.1 = Pefeed dimensions * If desied available in HSS with headoom T = mm. Please have a look into ou pice list fo a detailed availability. Peisliste Technische Hinweise Umfomtechnik Voichtungsbau Fomenbau Stanztechnik Fomenbau Technical notes 4 Foming Foming Tools Tools 3 Fixtues 2 1 Pice list Mould Components Mould Pess Components Tools
Hatmetallschneidstempel mit zylindischem Kopf Tungsten Cabide punch with cylindical head ähnlich DIN ISO 2 Fom A simila to DIN ISO 2 type A m Atikel-N.: 21. Item no.: 21. Ausfühung: Wi liefen die gelötete Ausfühung. Spezialanfetigungen aus dem Vollen auf Anfage. Vesion: We delive the bazed vesion. Custom made poducts fom solid mateial upon equest. Wekstoff: Maktübliches Hatmetall Mateial: Commecially available Tungsten Cabide Andee Längen, Duchmesse und Toleanzen (h) auf Anfage. Othe diametes, lengths and toleances (h) on equest. 1.. el. July 29
Hatmetallschneidstempel mit zylindischem Kopf Tungsten Cabide punch with cylindical head ähnlich DIN ISO 2 Fom A simila to DIN ISO 2 type A Wi übe uns About Us Andee Längen, Duchmesse und Toleanzen (h) auf Anfage. 1.17 m 1. 1.1 1.2 1.3 1.4 1. 1.7 1. 1.9 2. 2.1 2.2 2.3 2. 2. 2.9 3. 3.1 3.4 3. 3. 3.9 4. 4.1 4.4 4. 4. 4.9.... 7. 7.. 9. 1.. el. May 211.1.2 2. 2.2 2. 3. 3.2 3. 3.7 4. 4....... 7. 7... 9. 9. 1. 1. 11. 12.. T +.2 +.1 +.1 +.1 + 1.3 71 Othe diametes, lengths and toleances (h) on equest. Stufung: 1, 4,9 =,1 Gadation: 1, 4,9 =,1 Peisliste Technische Hinweise Umfomtechnik Voichtungsbau Fomenbau Stanztechnik Fomenbau Technical notes 4 Foming Foming Tools Tools 3 Fixtues 2 1 Pice list Mould Components Mould Pess Components Tools
Schneidstempel mit zylindischem Kopf Punch with cylindical head mit und abgesetztem Schaft ähnlich DIN ISO 2, Fom B with ound stepped point simila to DIN ISO 2 standad type B Atikel-N.: 21... Ansatzlänge l 2 = 1 mm 2... Ansatzlänge l 2 = mm 214... Ansatzlänge l 2 = 17 mm Item no.: 21... base length l 2 = 1 mm 2... base length l 2 = mm 214... base length l 2 = 17 mm Die 4. Stelle de At. N. bezeichnet den Wekstoff siehe Seite 1.1 The 4th digit of the item no. indicates the mateial, see page 1.1 Wekstoffe: HWS, HSS, Vanadis 23, Weitee Wekstoffe auf Anfage ehältlich. Siehe Seite.9.1 Mateials: HWS, HSS, Vanadis 23 Fo othe mateials see page.9.1 j +,1 Stufung Gadation +,1,1,1 +,1 d 3 m,1 +,1 T +,2 +,1 +,1 +,1 l 2 +, +,1 +, +,2 71 9 1, 2,9 1, 3,9 1,2 4,9 3 4 3,2 1 1,,9 2, 7,9,1 9 11,3 4, 9,9, 12,9 1, 1,9 12, 19,, 24,, 19 23 2 2 2,4 17 = Vozugsgößen = Pefeed dimensions 1.1 7. el. May 211
Schneidstempel mit zylindischem Kopf Punch with cylindical head mit abgesetztem Schaft, quadatisch, echteckig und langund ähnlich DIN ISO 2, Fom C with stepped squae, ectangula and ound elongated point simila to DIN ISO 2 standad type C Wi übe uns About Us Fom CS Fom CR Fom CO 1.19 a ±,1 +,1. el. May 211 b ±,1 +,1 Nach Wahl des Bestelles, G = max d 3 At customes equest, G = max d 3 = Vozugsgößen quadatisch abgesetzte Schneidschaft echteckig abgesetzte Schneidschaft langund abgesetzte Schneidschaft Wekstoffe: HWS, HSS, Vanadis 23, Weitee Wekstoffe auf Anfage ehältlich. Siehe Seite.9.1 Ausfühung und Häte: Die Sicheungsfläche befindet sich imme an de längsten Fomseite. Auf Wunsch fetigen wi die Sicheungsfläche an de kuzen Fomseite.,1,1 9 11 19 23 2 d 3 m 4 1 2 2 T +,2 +,1 3 +,1 +,1 Fü die jeweiligen Fomstempel fühen wi ebenfalls die passenden Schneidbuchsen in unseem Fetigungspogamm. Weitee Ansatzfomen s. nächste Seite. all aound all aound,2,3,4 all aound Type CS Type CR Type CO l 2 +, +,1 Vozugsmaße = 1,, 17; Andee Längen möglich Pefeed sizes = 1,, 17; Othe lengths possible = Pefeed dimensions squae stepped shaft ectangula stepped shaft ound elongated stepped shaft Mateials: HWS, HSS, Vanadis 23 Fo othe mateials see page.9.1 Vesion and hadness: The locating flat can always be found on the longest side. If desied, we can modify the tool so that the locating flat is on the shotest side. +, +,2 71 9 1 We also have the espective dies fo each of the punches in ou poduct ange. Fo futhe base types, see next page. Peisliste Technische Hinweise Umfomtechnik Voichtungsbau Fomenbau Stanztechnik Fomenbau Technical notes 4 Foming Foming Tools Tools 3 Fixtues 2 1 Pice list Mould Components Mould Pess Components Tools
Fombeispiele Type vaiations Schneidstempel und Schneidbuchsen Punches and dies Diese Fomen liefen wi entspechend Ihe Zeichnung bzw. Angaben in unteschiedliche Wekstoffauswahl: HWS, HSS sowie pulvemetallugische Stähle, auf Wunsch beschichtet. We can supply these tools accoding to you equiements fom a ange of mateials: HWS, HSS and powde metallugic steels. Also coated if desied. 1.2
Schneidstempel mit zylindischem Kopf Punch with cylindical head mit fedendem Abdückstift ähnlich DIN ISO 2, Fom E and sping loaded ejecto pin simila to DIN ISO 2 standad type E Atikel-N.: 2. Die 4. Stelle de At. N. bezeichnet den Wekstoff siehe Seite 1.1 Item no.: 2. The 4th digit of the item no. indicates the mateial, see page 1.1 Wekstoffe: HSS und CPM 1 V Weitee Wekstoffe auf Anfage ehältlich. Siehe Seite.9.1 Mateials: HSS and CPM 1 V Fo othe mateials see page.9.1 Duchmesse - auch ohne Quebohung vefügba. Diamete - also available without coss boehole. m,1 +,1 +, +,2 3/71 9 1 12 9 11,3 1 2 19 23,4 2 2 = Vozugsgößen = Pefeed dimensions Detailliete Vefügbakeit siehe Peisliste. Please have a look into ou pice list fo a detailed availability. 1.22. el. July 29
Schneidstempel mit zylindischem Kopf Punch with cylindical head mit abgesetztem Schaft und mit fedendem Abdückstift ähnlich DIN ISO 2, Fom F with stepped point and sping loaded ejecto pin simila to DIN ISO 2 standad type F Wi übe uns About Us Atikel-N.: Wekstoffe: 1.23. el. July 29 217... Ansatzlänge l 2 = 1 mm 21... Ansatzlänge l 2 = mm 219... Ansatzlänge l 2 = 17 mm Die 4. Stelle de At. N. bezeichnet den Wekstoff siehe Seite 1.1 HSS und CPM 1 V Weitee Wekstoffe auf Anfage ehältlich. Siehe Seite.9.1 Duchmesse - auch ohne Quebohung vefügba. j 1,,9 2, 7,9 4, 9,9, 12,9, 1,9 12, 19,, 24, Stufung Gadation,1,,1,1 9 11 19 23 2 d 3 m,1 1 2 2 +,1 +,1,3,4 Item no.: Mateials: l 2 +, +,1 = Vozugsgößen = Pefeed dimensions 1 17 217... base length l 2 = 1 mm 21... base length l 2 = mm 219... base length l 2 = 17 mm The 4th digit of the item no. indicates the mateial, see page 1.1 HSS and CPM 1 V Fo othe mateials see page.9.1 Diamete - also available without coss boehole. +, +,2 71 9 1 Peisliste Technische Hinweise Umfomtechnik Voichtungsbau Fomenbau Stanztechnik Fomenbau Technical notes 4 Foming Foming Tools Tools 3 Fixtues 2 1 Pice list Mould Components Mould Pess Components Tools
Schneidstempel mit zylindischem Kopf Punch with cylindical head mit abgesetztem Schaft, quadatisch, echteckig, langund mit fedendem Abdückstift ähnlich DIN ISO 2, Fom G with stepped squae, ectangula, ound elongated point with sping loaded ejecto simila to DIN ISO 2 standad type G umlaufend All aound umlaufend All aound umlaufend All aound Fom GS quadatisch abgesetzte Schneidschaft, mit Abdückstift Type GS squae stepped point with ejecto pin Fom GR echteckig abgesetzte Schneidschaft, mit Abdückstift Type GR ectangula stepped point with ejecto pin Fom GO langund abgesetzte Schneidschaft, mit Abdückstift Type GO ound elongated stepped point with ejecto pin Wekstoffe: HSS und CPM 1 V Weitee Wekstoffe auf Anfage ehältlich. Siehe Seite.9.1 Mateials: HSS and CPM 1 V Fo othe mateials see page.9.1 a b d 3 l 2 ±,1 ±,1,1,1 m +,1 +,1 +, +, +, +,2 71 9 Nach Wahl des Bestelles, G = max d 3 At custome s equest, G = max d 3 9 11 19 23 1 2,3,4 Vozugsmaße = 1,, 17; Andee Längen möglich Pefeed sizes = 1,, 17; Othe lengths possible 2 2 = Vozugsgößen Fü die jeweiligen Fomstempel fühen wi ebenfalls die passenden Schneidbuchsen in unseem Fetigungspogamm = Pefeed dimensions We also have the espective dies fo each of the punches in ou poduct ange 1.24. el. July 29
Fombeispiele Type vaiations Schneidstempel und Schneidbuchsen Punches and dies Wi übe uns About Us Diese Fomen liefen wi entspechend Ihe Zeichnung bzw. Angaben in unteschiedliche Wekstoffauswahl: HWS, HSS sowie pulvemetallugische Stähle, auf Wunsch beschichtet. We can supply these tools accoding to you equiements fom a ange of mateials: HWS, HSS and powde metallugic steels. Also coated if desied. 1.2 Peisliste Technische Hinweise Umfomtechnik Voichtungsbau Fomenbau Stanztechnik Fomenbau Technical notes 4 Foming Foming Tools Tools 3 Fixtues 2 1 Pice list Mould Components Mould Pess Components Tools
Schneidstempel mit zylindischem Kopf Punch with cylindical head Fom EA type EA Atikel-N.: 2. Item no.: 2. Wekstoffe: HSS, HWS* Weitee Wekstoffe auf Anfage ehältlich. Siehe Seite.9.1 Mateials: HSS, HWS* Fo othe mateials see page.9.1 h,1,1 T,1,1 +,2 +,2 +, +,2 3 71 9 1 3 4, 3,1 9 11,3 1 4,2 19 = Vozugsgößen * Nu in begenztem Umfang in HWS liefeba. = Pefeed dimensions * Only available in limited numbes in HWS fom stock 1.2. el. May 211
Schneidstempel mit zylindischem Kopf Punch with cylindical head Fom EB type EB Wi übe uns About Us Atikel-N.: Wekstoffe: 1.27 h 1, 2,2 2, 3,9 2, 4,9 3,,9 4, 7,9, 9,9, 12,9 7, 1,9 = Vozugsgößen 4. el. May 211 22... Ansatzlänge l 2 = 7 mm 23... Ansatzlänge l 2 = mm 24... Ansatzlänge l 2 = 17 mm Die 4. Stelle de At. N. bezeichnet den Wekstoff siehe Seite 1.1 HSS, HWS* Weitee Wekstoffe auf Anfage ehältlich. Siehe Seite.9.1 Stufung Gadation,1,1,1, 9 11 19 d 3 h 3 4 1 * Nu in begenztem Umfang in HWS liefeba. T,1,1 3,1 4,2 +,2 +,2,3 Item no.: Mateials: l 2 +, +,2 7 Wahlweise 7 ode 17 Choice of 7 o 17 17 22... base length l 2 = 7 mm 23... base length l 2 = mm 24... base length l 2 = 17 mm The 4th digit of the item no. indicates the mateial, see page 1.1 HSS, HWS* Fo othe mateials see page.9.1 +, +,2 71 9 1 = Pefeed dimensions * Only available in limited numbes in HWS fom stock Peisliste Technische Hinweise Umfomtechnik Voichtungsbau Fomenbau Stanztechnik Fomenbau Technical notes 4 Foming Foming Tools Tools 3 Fixtues 2 1 Pice list Mould Components Mould Pess Components Tools
Schneidstempel mit zylindischem Kopf Punch with cylindical head mit abgesetztem Schaft, quadatisch, echteckig und langund, Fom EC with stepped squae, ectangula and ound elongated shaft type EC all aound all aound all aound Fom ECS quadatisch abgesetzte Schneidschaft Type ECS squae stepped point Fom ECR echteckig abgesetzte Schneidschaft Type ECR ectangula stepped point Fom ECO langund abgesetzte Schneidschaft Type ECO ound elongated stepped point Wekstoffe: HSS, HWS* Weitee Wekstoffe auf Anfage ehältlich. Siehe Seite.9.1 Mateials: HSS, HWS* Fo othe mateials see page.9.1 a k b k,1,1 9 d 3 h T,1,1 3,1 +,2 +,2 l 2 +, +,2 +, +,2 71 9 1 Nach Wahl des Bestelles, G = max d 3 At customes equest, G = max d 3 11 19 24 1 2 4,2,3 Vozugsmaß = ; Andee Längen möglich Pefeed size = ; Othe lengths possible 29 2 = Vozugsgößen * Nu in begenztem Umfang in HWS liefeba Fü die jeweiligen Fomstempel fühen wi ebenfalls die passenden Schneidbuchsen in unseem Fetigungspogamm = Pefeed dimensions * Only available in limited numbes in HWS fom stock We also have the espective dies fo each of the punches in ou poduct ange 1.2 2. el. July 29
Fombeispiele Type vaiations Schneidstempel und Schneidbuchsen Punches and dies Wi übe uns About Us Diese Fomen liefen wi entspechend Ihe Zeichnung bzw. Angaben in unteschiedliche Wekstoffauswahl: HWS, HSS sowie pulvemetallugische Stähle, auf Wunsch beschichtet. We can supply these tools accoding to you equiements fom a ange of mateials: HWS, HSS and powde metallugic steels. Also coated if desied. 1.29 Peisliste Technische Hinweise Umfomtechnik Voichtungsbau Fomenbau Stanztechnik Fomenbau Technical notes 4 Foming Foming Tools Tools 3 Fixtues 2 1 Pice list Mould Components Mould Pess Components Tools
Schneidstempel ohne Kopf Punch without head nach de bisheigen DIN 91, Fom B to pevious DIN 91 standad, type B Atikel-N.: 112. Die 4. Stelle de At. N. bezeichnet den Wekstoff siehe Seite 1.1 Item no.: 112. The 4th digit of the item no. indicates the mateial, see page 1.1 Wekstoffe: HSS, HWS* Weitee Wekstoffe auf Anfage ehältlich. Siehe Seite.9.1 Mateials: HSS, HWS* Fo othe mateials see page.9.1 * In begenztem Umfang in B-HWS ab Lage liefeba. * Available in B-HWS only while stocks last. h Stufung Gadation mm + 2,,,9 1,,, 1,,,1, Vozugslänge = 71 In begenztem Umfang sind auch die Längen =,, 9 un ab Lage liefeba. Pefeed length = 71 The following lengths ae also available in limited numbes fom stock =,, 9 an. 1.3. el. July 29
Schneidstempel mit 3 -Kopf Punch with 3 -head Fom D Type D Wi übe uns About Us Atikel-N.: 3. Wekstoff: 1.31 h, 9 1 12 = Vozugsgößen 2. el. July 29 HSS Weitee Wekstoffe auf Anfage ehältlich. Siehe Seite.9.1 Häte: Schaft: Wekstoff HSS HRC + 2 Kopf: Wekstoff HSS HRC 2 ±,4,9 9,7 12, 14,4 1,9 1,7 h +,2 7, 7, 1 11 12 14 k 1 1 1 1 1 1 1, Item no.: 3. Mateial: HSS Fo othe mateials see page.9.1 Hadness: Shaft: Mateial HSS HRC + 2 Head: Mateial HSS HRC 2 ± + 1,2 1 12 = Pefeed dimensions Peisliste Technische Hinweise Umfomtechnik Voichtungsbau Fomenbau Stanztechnik Fomenbau Technical notes 4 Foming Foming Tools Tools 3 Fixtues 2 1 Pice list Mould Components Mould Pess Components Tools
Schneidbuchsen Die nach DIN 94, Fom A ohne Bund Fom B mit Bund acc. to DIN 94, type A headless type B with head Type A Type B Atikel-N.: Fom A: 1. Fom B: 123. Item no.: Type A: 1. Type B: 123. Ausfühung: Fom A: mit zylindischem Außenduchmesse, gehätet, angelassen und geschliffen Fom B: mit Bundansatz gehätet, angelassen und geschliffen. Bohung ist in Richtung d 4 kegelig 3 hinteschliffen. Vesion: Type A: with cylindical extenal diamete, hadened, tempeed and gound finished Type B: with head, hadened, tempeed and gound finished. Boehole dia. will be poduced with a cone of 3 to dia. d 4. Wekstoff: HSS Mateial: HSS Hinweis: Bei Zuodnung von Schneidstempeln und Schneidbuchsen Schneidspalt beachten. Note: Conside die cleaance fo the assignment of piecing punches and die bushes. H Stufung Gadation Type A: n Type B: k d 3 d 4 ±,1 Kuze Ausfühung Shot vesion l 2 l 3 +, +,,, Lange Ausfühung Long vesion l 2 l 3 +, +,,, t 1, 7 +,3 2 1,3 1,1 2, +,3 2 17 2 2 24,3 2,1 3, 7 9 +, 2 17 2 2 24,4,1 3,1 4, 1 +, 2 17 2 2 24,4 4,1,,1,,1,,1 1 12 1 12 14 17 +,7 +,7 +,7 2 2 2 2 2 2 2 24 24 24 24 24 24 24 24,4,,,1 1, 1,1 12, 1 22 2 24 + 1,3 + 1,3 2 2 1 2 2 24 23 24 24,,,2 12,1 1, 2 2 + 1,3 2 1 2 23 24, 1, 1,, 3 32 + 1,3 2 23 24 1, 1.32. el. May 211
Schneidbuchsen aus Hatmetall Tungsten Cabide die ähnlich DIN 94, Fom A simila to DIN 94 standad type A Wi übe uns About Us Atikel-N.: 1. Ausfühung: Wekstoff: Hinweis: Bei Zuodnung von Schneidstempeln und Schneidbuchsen Schneidspalt beachten. 1.33 3. el. May 211 Fom A: mit zylindischem Außenduchmesse, geschliffen Maktübliches Hatmetall ±, ab fom, ab fom, ab fom,9 ab fom 1,7 ab fom 1,7 ab fom 1,7 ab fom 1,7 ab fom 3,3 ab fom 3,3 Stufung Gadation,1 +,7 +,3 4 7 1 12 1 1 12 Item no.: 1. Vesion: Mateial: Note: Conside die cleaance fo the assignment of piecing punches and die bushes. Länge Length ±,2 2, Type A: with cylindical extenal diamete, gound finished Commecially available Tungsten Cabide Peisliste Technische Hinweise Umfomtechnik Voichtungsbau Fomenbau Stanztechnik Fomenbau Technical notes 4 Foming Foming Tools Tools 3 Fixtues 2 1 Pice list Mould Components Mould Pess Components Tools
Schneidbuchsen Die nach ISO 977, Fom A ohne Bund Fom B mit Bund acc. to ISO 977 standad type A headless type B with head Type A Type B Atikel-N.: Fom A: 2. Fom B: 223. Ausfühung: Fom A: mit zylindischem Außenduchmesse, gehätet, angelassen und geschliffen Fom B: mit Bundansatz gehätet, angelassen und geschliffen. Wekstoff: HSS Item no.: Type A: 2. Type B: 223. Vesion: Mateial: Type A: with cylindical extenal diamete, hadened, tempeed and gound finished Type B: with head, hadened, tempeed and gound finished. HSS Hinweis: Bei Zuodnung von Schneidstempeln und Schneidbuchsen Schneidspalt beachten. Note: Conside die cleaance fo the assignment of piecing punches and die bushes. d +,2 1, 2,4 Stufung Gadation D Type A: n Type B: m D 1,2 max 2, L +, _ l 2 h +,2 1, 3, 2, 3, 9 11 3, 4, _ 3 4 3,, 4, 7,2,1 1,, 2 2 4,, 7, 11,3 11,, 2 2 19 23 2 9, 12, 17,3 _ 32 1, 2, 32 3 2,7 2 1, 27,, 4 43 27,7 2, 3, 3 37, 1.34. el. May 211
Schneidbuchsen mit Statloch Die with state hole ähnlich ISO 977 simila to ISO 977 standad type A headless type B with head Wi übe uns About Us Atikel-N.: Fom A: 23. Fom B: 293. Ausfühung: Wekstoff: 1.3 d 1, 1, 1,2 1,2 1, 1, 1, 1, 1, 3. el. May 211 Fom A: mit zylindischem Außenduchmesse, gehätet, angelassen und geschliffen Fom B: mit Bundansatz gehätet, angelassen und geschliffen. HSS Achtung: Bei Schneidbuchsen fü Quadat und Rechteckschneidfomen sollte die Diagonale de Fom nicht göße sein als max. D Type A n Type B m 1 2 2 32 4 D 1,2 11 19 23 2 3 43 3 max 4, 9, 12 17,3 2,7 27,7 37 Item no.: Type A: 23. Type B: 293. Vesion: Mateial: Type A: with cylindical extenal diamete, hadened, tempeed and gound finished Type B: with head, hadened, tempeed and gound finished. HSS L +, 2 2 32 Waning: The diagonal pofile should not be lage than max. on dies fo squae and ectangula foming. l 4 4 2 2 2 2 2 h +,2 Peisliste Technische Hinweise Umfomtechnik Voichtungsbau Fomenbau Stanztechnik Fomenbau Technical notes 4 Foming Foming Tools Tools 3 Fixtues 2 1 Pice list Mould Components Mould Pess Components Tools
Fomschneidbuchsen mit Bund Foming die with head quadatisch echteckig langund mit Vedehsicheung ähnlich ISO 977 squae ectangula ound elongated with anti-slip featue simila to ISO 977 standad S R O (Rz 2,) Fom S: quadatische Schneidfom Atikel-N.: 33. Type S: squae type Item no.: 33. Fom R: echteckige Schneidfom Atikel-N.: 43. Type R: ectangulae type Item no.: 43. Fom O: langunde Schneidfom Atikel-N.: 3. Type O: long elongated type Item no.: 3. Wekstoff: HSS Mateial: HSS Hinweis: Bei Zuodnung von Schneidstempeln und Schneidbuchsen Schneidspalt beachten. Note: Conside die cleaance fo the assignment of piecing punches and die bushes. a H b H Stufung Gadation m d 3 d 4 max. k +,2 +, l 2 1,,4 2,, 1, 4 2, 7,4 2, 7,, 2, 9,9 2, 12,9 3,2 1,9 2, 1, 3,2, 4,,,1 2 2 19 23 2 9, 12, 17,3,, 2, 2, 32, 2 2 4, 2,9, 21, 32 3 2,7 2, 2,9,3 27, 4 43 27,7 2 Achtung: Bei Quadat- und Rechteck-Schneidfomen sollte die Diagonale de Fom nicht göße als d 4 max. sein. Waning: The diagonal pofile should not be lage than max. d 4 on dies fo squae and ectangula foming. 1.3. el. July 29
Fombeispiele Type vaiations Schneidstempel und Schneidbuchsen Punches and dies Wi übe uns About Us Diese Fomen liefen wi entspechend Ihe Zeichnung bzw. Angaben in unteschiedliche Wekstoffauswahl: HWS, HSS sowie pulvemetallugische Stähle, auf Wunsch beschichtet. We can supply these tools accoding to you equiements fom a ange of mateials: HWS, HSS and powde metallugic steels. Also coated if desied. 1.37 Peisliste Technische Hinweise Umfomtechnik Voichtungsbau Fomenbau Stanztechnik Fomenbau Technical notes 4 Foming Foming Tools Tools 3 Fixtues 2 1 Pice list Mould Components Mould Pess Components Tools
Stempelfühungsbuchsen Punch guide bush nach DIN 94, Fom C acc. to DIN 94, type C Atikel-N.: 411. Item no.: 411. Wekstoff: Einsatzstahl nach Wahl des Hestelles Mateial: Steel as elected by manufactue Häte: 74 ± 4 HV 1 Hadness: 74 ± 4 HV 1 H7 Stufung Gadation n t 1, 9 1,1 2, 12 2,1 3, 7 12 1,1 3,1 4, 12 4,1, 1,1,,1,,1 12 1 2 1,,1 1, 1,1 12, 12,1 1, 1 22 2 2 2 2 2,2 1, 1,, 3 3 Bitte beachten Sie, dass beim Einsatz von Schneidstempel nach ISO 2/21 keine Spielpassung gewähleistet weden kann. Please conside fo the using of punches accoding ISO 2/21 that no cleaance fit can be assued. 1.3 4. el. July 29
Stempelfühungsbuchsen Punch guide bush nach ISO 97 acc. to ISO 97 standad Wi übe uns About Us Atikel-N.: 312. Wekstoff: Häte: 74 ± 4 HV 1 Bitte beachten Sie, dass beim Einsatz von Schneidstempel nach ISO 2/21 keine Spielpassung gewähleistet weden kann. Die Nom ist in Übeabeitung. 1.39 H 1, 2,4 1, 3, 2, 3, 3,, 4, 7,2,, 7, 11,3 11,, 1, 2, 1, 27, 2, 3, 4. el. July 29 Einsatzstahl nach Wahl des Hestelles Stufung Gadation,1, n 1 2 2 32 4 Item no.: 312. Mateial: Hadness: 74 ± 4 HV 1, 12, 12,,, 2, 2, 2, 2, 32, 4, Steel as elected by manufactue t 1, 1, 1, 2, 2, 2, 2, 2, 4, 4, 4,,1 Please conside fo the using of punches accoding ISO 2/21 that no cleaance fit can be assued. The standad is going to be evised. Peisliste Technische Hinweise Umfomtechnik Voichtungsbau Fomenbau Stanztechnik Fomenbau Technical notes 4 Foming Foming Tools Tools 3 Fixtues 2 1 Pice list Mould Components Mould Pess Components Tools
Hestellgenzen in unseem Hause Bounday of poduction in ou company Maße, Toleanzen und Obeflächen Dimensions, toleances and sufaces Kubische Teile Länge: mm Beite: 4 mm Dicke:,4 mm Toleanz: ± 2 µm Obefläche: Rz 1, Längentoleanz: L/1. Zylindische Teile Länge: ohne Kopf: 1 mm mit Kopf: mm Duchmesse Ø:,... mm Ø / Länge: 1/2 Duchmessetoleanz: IT 3 Längentoleanz: ± µm Obefläche: Rz, Rotationssymmetische Teile mit unundem Ansatz Fomlänge: 1 mm Duchmesse Ø: mm Fomtoleanz: ± 2 µm Obefläche: Rz 1, Toleanz: ± 2 µm Eodiete Teile max. Schneidhöhe: 2 mm Länge: 3 mm Beite: 2 mm Fomtoleanz: ± 2 µm Dahtduchmesse:,...,2 mm Statlochduchmesse:,2 mm Obefläche: Ra,1 Bitte bei Teilen, die diese Genzen übescheiten, Machbakeit bei uns im Haus abkläen. Cubic pats length: mm width: 4 mm thickness:,4 mm toleance: ± 2 µm suface: Rz 1, length toleance: L/1. Cylindical pats length: without head: 1 mm with head: mm diamete Ø:,... mm Ø / length: 1/2 toleance of diamete: IT 3 length toleance: ± µm suface: Rz, Rotation-symetic pats with hub out-of-cente toleance of length: 1 mm diamete Ø: mm toleance of shape: ± 2 µm suface: Rz 1, toleance: ± 2 µm Eoded pats max. cutting hight: 2 mm length: 3 mm width: 2 mm toleance of shape: ± 2 µm diamete of wie:,...,2 mm diamete of state hole:,2 mm suface: Ra,1 On demand of pats beyond these boundaies, please send an inquiy to ou company. www.ebehad.de