Druck- und Papiertechnik Printing and Paper Technology. Print 4.0 Open Interface for the Graphic Arts Industry
|
|
- Frank Ritter
- vor 7 Jahren
- Abrufe
Transkript
1 Druck- und Papiertechnik Printing and Paper Technology Print 4.0 Open Interface for the Graphic Arts Industry
2 Drucktechnik in einer vernetzten Produktion Ziel des Projektes Drucktechnik in einer vernetzten Produktion ist die flexible Produktion von personalisierten Druckprodukten in kleinen Stückzahlen. Um Kundenwünschen gerecht zu werden, brauchen Druckereien für die häufigen Auftragswechsel und vielfältigen Produktionswege eine digitalisierte und automatisierte Auftragsabwicklung. Hierfür ist die Definition eines herstellerunabhängigen Standard-Informationsträgers erforderlich, der den Produktionsablauf über bestehende Schnittstellen hinweg vernetzt. Eine produktgebundene Codierung und die übergeordnete Datenverwaltung stellen Komponenten einer echtzeitfähigen, prozessoptimierten Lösung dar. Bestehende Standards (z. B. JDF) werden bei der Entwicklung berücksichtigt. Die herstellerübergreifende Nutzung sowie der Einsatz auf bestehenden Anlagen ohne große Investitionen sollen ebenfalls möglich sein. Die Mitgliedsfirmen des Fachverbandes Druck- und Papiertechnik im VDMA (Verband Deutscher Maschinen- und Anlagenbauer) haben das Projekt Drucktechnik in einer vernetzten Produktion initiiert. Aktuell ist die Fraunhofer IWU Projektgruppe RMV aus Augsburg in Kooperation mit dem Lehrstuhl für Produktionsinformatik der Universität Augsburg damit beauftragt, die Prozessschritte der industriellen Druckproduktion zu analysieren und mit einem wissenschaftlichen Ansatz zu einer möglichst vielseitigen Lösung zu entwickeln.
3 Printing Technology in a Networked Production Environment The aim of the Printing Technology in a Networked Production Environment project is to ensure the flexible production of personalized print products in small batches. In order to be able to satisfy their customers wishes, the printing houses need a digitized and automated job handling process for the frequent job changes and manifold production paths. For that, the definition of a manufacturer-independent standardized information carrier is required that interlinks the production process across all existing interfaces. Product-specific encoding and data administration on a higher level are components of a real-time, process optimized solution. Existing standards (e.g., JDF) are taken into account in its development. The plan is to enable customers to use the new standard on existing equipment independent of the manufacturers. while keeping investment costs as low as possible. The Printing Technology in a Networked Production Environment project was initiated by the member companies of the Printing and Paper Technology Association within VDMA (the German Engineering Federation). At present, the Fraunhofer IWU (Institute for Machine Tools and Forming Technology) RMV (Resource Efficient Mechatronic Processing Machines) Project Group in Augsburg is cooperating with the Chair of Manufacturing Informatics of Augsburg University on an analysis of the process steps of industrial print production and a scientific approach in order to develop a solution that is as widely applicable as possible.
4 Teilnehmende Firmen Participating Companies Adolf Mohr Maschinenfabrik GmbH & Co. KG Herrn Matthias Langer Postfach Hofheim Tel Halle 1, Stand C03 Baumann Maschinenbau Solms GmbH & Co. KG Herrn Volkmar Assmann Oberbieler Str Solms Tel / info@baumann-mbs.de Halle 14, Stand A32 Heidelberger Druckmaschinen AG Herrn Dr. Rainer Prosi Dr.-Hell-Str Kiel Rainer.Prosi@Heidelberg.com Halle 01, Stand 1 Hochschule für Technik Wirtschaft und Kultur Leipzig Fakultät Medien Herrn Prof. Dr.-Ing. Michael Reiche Postfach Leipzig michael.reiche@htwk-leipzig.de Halle 7a, Stand B01 Campus Science Koenig & Bauer AG Herrn Bernd Patzelt Postfach Radebeul Tel. +49 (351) Bernd.Patzelt@kba.com Halle 16, Stand C47 KOLBUS GMBH & CO. KG Herrn Bernd Gosewehr, Frau Karen Rauter Osnabrücker Str Rahden engineering@kolbus.de Halle 16, Stand C22 manroland web systems GmbH Herr Dr. Gregor Enke Alois-Senefelder-Allee Augsburg Tel gregor.enke@manroland-web.com Halle 14, Stand C41 MBO Maschinenbau Oppenweiler Binder GmbH & Co. KG Herrn Matthias Rapp Grabenstraße Oppenweiler Tel /46-0 info@mbo-folder.com Halle 6, Stand B40 MÜLLER MARTINI Druckmaschinen GmbH Herrn Andreas Aplien Untere Brühlstrasse 13 CH-4800 Zofingen andreas.aplien@ch.mullermartini.com Halle2, Stand A49 Océ Printing Systems GmbH & Co. KG Herrn Christian Sack R&D Manager embedded Software Siemensallee Poing SID Sächsisches Institut für die Druckindustrie GmbH Herrn Hans-Georg Deicke Mommsenstr Leipzig Tel deicke@sidleipzig.de Halle 16, Stand D77 Wohlenberg Buchbindesysteme GmbH Herr Sebastian Popp Postfach Verden Tel sales@wohlenberg.com Halle 14, Stand A30
5
6 VDMA Druck- und Papiertechnik Printing and Paper Technology Lyoner Str Frankfurt am Main Phone Fax Internet dup.vdma.org/print40 dup.vdma.org VDMA: Designstudio
INTERREG IIIa Project R&D - Ready for Research and Development Project results and ongoing activities
INTERREG IIIa Project R&D - Ready for Research and Development Project results and ongoing activities Györ, 5th December 2007 Key regions + perifary for surveys Background objectives CENTROPE needs a strategy
MehrMesser und Lochscheiben Knives and Plates
Messer und Lochscheiben Knives and Plates Quality is the difference Seit 1920 Since 1920 Quality is the difference Lumbeck & Wolter Qualität, kontinuierlicher Service und stetige Weiterentwicklung zeichnen
MehrLandwirtschaft 4.0 rückt näher, dank der individuellen und herstellerübergreifenden Datenaustauschplattform
30.09.2016 Dr. Johannes Sonnen Landwirtschaft 4.0 rückt näher, dank der individuellen und herstellerübergreifenden Datenaustauschplattform 1 / 20 DKE-Founding 2 / 20 Customers have precise Datamanagement
MehrTechnische Universität Kaiserslautern Lehrstuhl für Virtuelle Produktentwicklung
functions in SysML 2.0 La Jolla, 22.05.2014 12/10/2015 Technische Universität Kaiserslautern Lehrstuhl für Virtuelle Produktentwicklung Dipl. Wirtsch.-Ing. Christian Muggeo Dipl. Wirtsch.-Ing. Michael
MehrCustomer-specific software for autonomous driving and driver assistance (ADAS)
This press release is approved for publication. Press Release Chemnitz, February 6 th, 2014 Customer-specific software for autonomous driving and driver assistance (ADAS) With the new product line Baselabs
MehrSimulation of Cold Forging. - examples of applications from around the world - Dr. Gerhard H. Arfmann CPM GmbH, Herzogenrath
Simulation of Cold Forging - examples of applications from around the world - Dr. Gerhard H. Arfmann CPM GmbH, Herzogenrath 1 CV Dr. Arfmann Till 1974 High School at Kreisgymnasium Halle, Halle Westfalen,
MehrWE SHAPE INDUSTRY 4.0 BOSCH CONNECTED INDUSTRY DR.-ING. STEFAN AßMANN
WE SHAPE INDUSTRY 4.0 BOSCH CONNECTED INDUSTRY DR.-ING. STEFAN AßMANN Bosch-Definition for Industry 4.0 Our Seven Features Connected Manufacturing Connected Logistics Connected Autonomous and Collaborative
MehrGreat assortment and development for professional wood working
BEST OF TOOLS Sortimentsvielfalt und Top-Entwicklung für die professionelle Holz- und Kunststoffbearbeitung Great assortment and development for professional wood working WE DO IT. Unsere Werkzeuge werden
MehrLehrstuhl für Allgemeine BWL Strategisches und Internationales Management Prof. Dr. Mike Geppert Carl-Zeiß-Str. 3 07743 Jena
Lehrstuhl für Allgemeine BWL Strategisches und Internationales Management Prof. Dr. Mike Geppert Carl-Zeiß-Str. 3 07743 Jena http://www.im.uni-jena.de Contents I. Learning Objectives II. III. IV. Recap
MehrFrom a Qualification Project to the Foundation of a Logistics Network Thuringia. Logistik Netzwerk Thüringen e.v.
From a Qualification Project to the Foundation of a Logistics Network Thuringia Strengthening the role of Logistics through Corporate Competence Development a pilot project by Bildungswerk der Thüringer
MehrReferenzprojekte. Frankfurt/Main Riedberg Europas größte Wohnbaustelle (FAZ 17.04.2004): Bis 2010 entstehen über 10.
Referenzprojekte Frankfurt/Main Riedberg Europas größte Wohnbaustelle (FAZ 17.04.2004): Bis 2010 entstehen über 10.000 Wohneinheiten, mit neuem Campus und Max Planck Institut- 266 Hektar Messezentrum Leipzig
MehrSelf-Organisation in Germany s Higher Education IT
EUNIS 2014-06-12 Self-Organisation in Germany s Higher Education IT Hartmut Hotzel ZKI Vice President & Director of IT-Services, Bauhaus-Universität Weimar 1 Self-Organisation in Germany s HE IT 1. Pinpointing
MehrSecurity for Safety in der Industrieautomation Konzepte und Lösungsansätze des IEC 62443
Security for Safety in der Industrieautomation Konzepte und Lösungsansätze des IEC 62443 Roadshow INDUSTRIAL IT SECURITY Dr. Thomas Störtkuhl 18. Juni 2013 Folie 1 Agenda Einführung: Standard IEC 62443
MehrEnergieeffizienz und Erneuerbare Energien Programme der EZ -- ein Zwischenstand
Energieeffizienz und Erneuerbare Energien Programme der EZ -- ein Zwischenstand Climate Policy Capacity Building Seminar Kiew 07.10.04 Klaus Gihr Senior Project Manager Europe Department Was sind unsere
MehrDIGICOMP OPEN TUESDAY AKTUELLE STANDARDS UND TRENDS IN DER AGILEN SOFTWARE ENTWICKLUNG. Michael Palotas 7. April 2015 1 GRIDFUSION
DIGICOMP OPEN TUESDAY AKTUELLE STANDARDS UND TRENDS IN DER AGILEN SOFTWARE ENTWICKLUNG Michael Palotas 7. April 2015 1 GRIDFUSION IHR REFERENT Gridfusion Software Solutions Kontakt: Michael Palotas Gerbiweg
MehrTOOLMAKING PROTOTYPING 3D PRINTING
TOOLMAKING PROTOTYPING 3D PRINTING Werkzeugbau Prototypen 3D Druck Toolmaking Prototyping 3D Printing Alles aus einer Hand Die PPM - Pforzheimer Präzisions Mechanik versteht sich als Start Up in den Bereichen
MehrProseminar - Organisation und Personal Seminar Organisational Theory and Human Resource Management
1 Proseminar - Organisation und Personal Seminar Organisational Theory and Human Resource Management Veranstaltungsnummer / 82-021-PS08-S-PS-0507.20151.001 Abschluss des Studiengangs / Bachelor Semester
MehrTechnology Transfer in Steep Terrain Timber Harvesting (TechnoSteep)
Beyond Europe: Informationsveranstaltung zur 2. Ausschreibung 14. Dezember 2016, Wien (Österreich) Technology Transfer in Steep Terrain Timber Harvesting (TechnoSteep) Beyond Europe: 1. Ausschreibung Martin
MehrTMF: Improving the Organisation and Infrastructure of Medical Research in Cooperative Structures
TMF: Improving the Organisation and Infrastructure of Medical Research in Cooperative Structures TMF Technologie- und Methodenplattform für die vernetzte medizinische Forschung e.v. Who is TMF? Organisation
MehrIntegrated result data management in the development process of vehicle systems based on the ASAM ODS standard
Integrated result data management in the development process of vehicle systems based on the ASAM ODS standard Dipl.-Ing. (FH) Stefan Geneder, Technische Hochschule Ingolstadt Dr. Felix Pfister, AVL List,
MehrProduct Lifecycle Manager
Product Lifecycle Manager ATLAS9000 GmbH Landauer Str. - 1 D-68766 Hockenheim +49(0)6205 / 202730 Product Lifecycle Management ATLAS PLM is powerful, economical and based on standard technologies. Directory
MehrCERTIFICATE. with the organizational units/sites as listed in the annex. Scope: Administration of the associated production units of the KUKA Group
CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains an Energy Management System. : Administration of the associated production units
MehrYour safety with us...
Your safety with us... Flame-proof Conversions Ex Schutzumrüstungen Industrie Maschinen Wir rüsten Maschinen mit Ex-Schutz aus, zur Verwendung in industrieller Umgebung mit feuer- und explosionsrisikoklassifizierter
MehrIndustrie 4.0 Predictive Maintenance. Kay Jeschke SAP Deutschland AG & Co. KG., Februar, 2014
Industrie 4.0 Predictive Maintenance Kay Jeschke SAP Deutschland AG & Co. KG., Februar, 2014 Anwendungsfälle Industrie 4.0 Digitales Objektgedächtnis Adaptive Logistik Responsive Manufacturing Intelligenter
MehrStanz-, Press- und Ziehteile Punched Pressed and Drawn parts
Stanz-, Press- und Ziehteile Punched Pressed and Drawn parts Produkt Portfolio. Product portfolio Automotive / Sicherheit Produktion von Sicherheitsteilen und kompletten Baugruppen (Nieten, Schweißen,
MehrEnvironmental management in German institutions of higher education: Lessons learnt and steps toward sustainable management
Environmental management in German institutions of higher education: Lessons learnt and steps toward sustainable management Lüneburg, Juni 23/24, 2005 Joachim Müller Sustainable Management of Higher Education
MehrHIR Method & Tools for Fit Gap analysis
HIR Method & Tools for Fit Gap analysis Based on a Powermax APML example 1 Base for all: The Processes HIR-Method for Template Checks, Fit Gap-Analysis, Change-, Quality- & Risk- Management etc. Main processes
MehrEmotion Recognition of Call Center Conversations Robert Bosch Engineering and Business Solutions Private Limited
Emotion Recognition of Call Center Conversations Robert Bosch Engineering and Business Solutions Private Limited 1 Agenda 1 Introduction 2 Problem Definition 3 Solution Overview 4 Why Consider Emotions
MehrBosch Rexroth - The Drive & Control Company
Bosch Rexroth - The Drive & Control Company Alle Rechte bei Bosch Rexroth AG, auch für den Fall von Schutzrechtsanmeldungen. Jede Verfügungsbefugnis, wie Kopier- und Weitergaberecht, bei uns. 1 Case study
MehrDistributed testing. Demo Video
distributed testing Das intunify Team An der Entwicklung der Testsystem-Software arbeiten wir als Team von Software-Spezialisten und Designern der soft2tec GmbH in Kooperation mit der Universität Osnabrück.
MehrIntroduction to the diploma and master seminar in FSS 2010. Prof. Dr. Armin Heinzl. Sven Scheibmayr
Contemporary Aspects in Information Systems Introduction to the diploma and master seminar in FSS 2010 Chair of Business Administration and Information Systems Prof. Dr. Armin Heinzl Sven Scheibmayr Objective
MehrIndustrie 4.0 The Impact of Digitization on Sustainable Value Creation
Industrie 4.0 The Impact of Digitization on Sustainable Value Creation INTANGIBLES: THE EUROPEAN STATE OF THE ART 2nd International Policy Conference Frankfurt am Main, 12. September 2017 Professor Dr.
MehrDaten haben wir reichlich! 25.04.14 The unbelievable Machine Company 1
Daten haben wir reichlich! 25.04.14 The unbelievable Machine Company 1 2.800.000.000.000.000.000.000 Bytes Daten im Jahr 2012* * Wenn jedes Byte einem Buchstaben entspricht und wir 1000 Buchstaben auf
MehrTMF projects on IT infrastructure for clinical research
Welcome! TMF projects on IT infrastructure for clinical research R. Speer Telematikplattform für Medizinische Forschungsnetze (TMF) e.v. Berlin Telematikplattform für Medizinische Forschungsnetze (TMF)
MehrLeading the innovation in the traditional field of Constructions. C. Chiti, Technical Director Knauf Italy
Leading the innovation in the traditional field of Constructions C. Chiti, Technical Director Knauf Italy 1 The Knauf Group The Knauf Group today is one of the leading companies in the building materials
MehrISO 15504 Reference Model
Process flow Remarks Role Documents, data, tools input, output Start Define purpose and scope Define process overview Define process details Define roles no Define metrics Pre-review Review yes Release
MehrWave, Dune, Helix Welle, Düne, Helix
Wave, Dune, Helix The Munken Cube is sculpture, working tool and source of inspiration all in one. The form is pure at the same time flexible and consists of a monumental stack of Munken paper and a base
MehrLED in Perfection. but at the moment we are just at the dawn of a new technology. The future will shine with LEDs, Die Zukunft leuchtet in LED,
LED in Perfection Die Zukunft leuchtet in LED, doch hier sind wir erst am Anfang einer neuen Technologie. The future will shine with LEDs, but at the moment we are just at the dawn of a new technology.
MehrOperational Excellence with Bilfinger Advanced Services Plant management safe and efficient
Bilfinger GreyLogix GmbH Operational Excellence with Bilfinger Advanced Services Plant management safe and efficient Michael Kaiser ACHEMA 2015, Frankfurt am Main 15-19 June 2015 The future manufacturingplant
MehrPlant Data Services Frei verwendbar Siemens AG 2016 siemens.de/plant-data-services
Plant Data Services Frei verwendbar Siemens AG 26 siemens.de/plant-data-services Wir alle fragen uns Schöpft meine Anlage ihr volles Potenzial aus? Kennen wir das volle Potenzial unserer installierten
MehrProf. Alfred Katzenbach
English version below Lehre: Informationstechnik und Wissensverarbeitung in der Produktentwicklung www.iktd.uni-stuttgart.de/ Beratung: Produktentwicklungsprozesse, -methoden und -systeme: Managementberatung
MehrThe German professional Education System for the Timber Industry. The University of Applied Sciences between vocational School and University
Hochschule Rosenheim 1 P. Prof. H. Köster / Mai 2013 The German professional Education System for the Timber Industry The University of Applied Sciences between vocational School and University Prof. Heinrich
MehrOutline. 5. A Chance for Entrepreneurs? Porter s focus strategy and the long tail concept. 6. Discussion. Prof. Dr. Anne König, Germany, 27. 08.
Mass Customized Printed Products A Chance for Designers and Entrepreneurs? Burgdorf, 27. 08. Beuth Hochschule für Technik Berlin Prof. Dr. Anne König Outline 1. Definitions 2. E-Commerce: The Revolution
MehrWelche Rolle kann gemeinwohlorientierte Wissenschaft/Forschungspolitik für die Entwicklung und Umsetzung einer zukunftsfähigen Green Economy spielen?
Welche Rolle kann gemeinwohlorientierte Wissenschaft/Forschungspolitik für die Entwicklung und Umsetzung einer zukunftsfähigen Green Economy spielen? - In welcher Verbindung stehen gemeinwohlorientierte
MehrMindSphere Lounge SPS IPC Drive 2016, Programmübersicht
MindSphere Lounge SPS IPC Drive 2016, Programmübersicht von 22.11. bis 24.11. 2016 Status: 15.11.2016 Dienstag, 22. November 2016 Intro 9:00 Uhr Fintechs and digital disruption in Banking, 10:20 10:50
MehrZurich Open Repository and Archive. Anatomie von Kommunikationsrollen. Methoden zur Identifizierung von Akteursrollen in gerichteten Netzwerken
University of Zurich Zurich Open Repository and Archive Winterthurerstr. 190 CH-8057 Zurich http://www.zora.uzh.ch Year: 2008 Anatomie von Kommunikationsrollen. Methoden zur Identifizierung von Akteursrollen
MehrGern beraten wir auch Sie. Sprechen Sie uns an!
de en Unter dem Motto wire Solutions bietet die KIESELSTEIN International GmbH verschiedenste Produkte, Dienstleistungen und After Sales Service rund um den Draht an. Die Verbindung von Tradition und Innovation
MehrWir UNTERNEHMEN BUSINESS SECTORS. steuern unser. Unternehmen Branchen
Wir steuern unser UNTERNEHMEN Unternehmen Branchen BUSINESS SECTORS» Technische Entwicklung Engineering» Luft- und Raumfahrtindustrie Aerospace industries» Medizintechnik Medicine Equipment» Halbleiterindustrie
MehrIch habe eine Nachricht für Sie
Ich habe eine Nachricht für Sie Even on a well-planned trip whether holiday or business changes can happen to the planned schedule. In such an event, it s essential to be able to cope with the new arrangements.
MehrGeorg Güntner (Salzburg Research) Kick-Off der IoT-Group Salzburg IoT-Talks Salzburg: Mai 2015
Georg Güntner (Salzburg Research) Kick-Off der IoT-Group Salzburg IoT-Talks Salzburg: Mai 2015 Techno-Z Salzburg, Veranstaltungszentrum, 19.05.2015 Agenda Welcome IoT-Talks Talk 1: "Architekturen für das
MehrMunich Center for Technology in Society
COST Action TU1002 Accessibility Instruments for Planning Practice in Europe Munich Center for Technology in Society Klaus Mainzer Founding Director Lehrstuhl für Philosophie und Wissenschaftstheorie Complex
MehrSocial Sciences and Humanities role in Social Innovation Some key observations from the experience of TU Dortmund University sfs
Social Sciences and Humanities role in Social Innovation Some key observations from the experience of TU Dortmund University sfs Jürgen Howaldt & Dmitri Domanski Rethinking the role of Social Sciences
MehrEn:Tool EnEff BIM Introduction to the Project and Research Association
En:Tool EnEff BIM Introduction to the Project and Research Association Christoph van Treeck 1 Lehrstuhl für Energieeffizientes Bauen (E3D), RWTH Aachen University, Germany EnTool: EnEff:BIM»Planning, system
MehrAluminium-air batteries: new materials and perspectives
Green Tech Innovators Club Aluminium-air batteries: new materials and perspectives Dr. Francisco J. Pérez-Alonso Albufera Energy Storage OUR COMPANY Albufera Energy Storage is a Spanish start-up (SME)
MehrChallenges in Systems Engineering and a Pragmatic Solution Approach
Pure Passion. Systems Engineering and a Pragmatic Solution Approach HELVETING Dr. Thomas Stöckli Director Business Unit Systems Engineering Dr. Daniel Hösli Member of the Executive Board 1 Agenda Different
MehrQuality Management is Ongoing Social Innovation Hans-Werner Franz
Quality Management is Ongoing Social Innovation Hans-Werner Franz ICICI Conference, Prague 1-2 October 2009 What I am going to tell you social innovation the EFQM Excellence model the development of quality
MehrIndustrial USB3.0 Miniature Camera with color and monochrome sensor
Welcome to the presentation Industrial USB3.0 Miniature Camera with color and monochrome sensor & Data rates of modern image sensors S. 1/12 Vortrag_Spectronet_USB3.0_Datenverarbeitung_ENGLISCH_Vorlage_für_pdf_v1_MH20032014
MehrInfrastructure as a Service (IaaS) Solutions for Online Game Service Provision
Infrastructure as a Service (IaaS) Solutions for Online Game Service Provision Zielsetzung: System Verwendung von Cloud-Systemen für das Hosting von online Spielen (IaaS) Reservieren/Buchen von Resources
MehrAbsaugsysteme. für Bearbeitungszentren. Extraction Systems for Machining Centers
Absaugsysteme für Bearbeitungszentren Extraction Systems for Machining Centers Referenzen References Je nach Anforderungen bieten wir Ihnen mit unseren speziellen Absaugsystemen die maßgeschneiderte Lösung
Mehrprorm Budget Planning promx GmbH Nordring Nuremberg
prorm Budget Planning Budget Planning Business promx GmbH Nordring 100 909 Nuremberg E-Mail: support@promx.net Content WHAT IS THE prorm BUDGET PLANNING? prorm Budget Planning Overview THE ADVANTAGES OF
MehrEfficient Design Space Exploration for Embedded Systems
Diss. ETH No. 16589 Efficient Design Space Exploration for Embedded Systems A dissertation submitted to the SWISS FEDERAL INSTITUTE OF TECHNOLOGY ZURICH for the degree of Doctor of Sciences presented by
MehrInternational Trade Fair for the Aerospace Supply Chain Industry Internationale Fachmesse der Zulieferindustrie für die Luft- und Raumfahrttechnik
International Trade Fair for the Aerospace Supply Chain Industry Internationale Fachmesse der Zulieferindustrie für die Luft- und Raumfahrttechnik Exhibition Business Meetings Presentations 20.-22. November
MehrFEM Isoparametric Concept
FEM Isoparametric Concept home/lehre/vl-mhs--e/cover_sheet.tex. p./26 Table of contents. Interpolation Functions for the Finite Elements 2. Finite Element Types 3. Geometry 4. Interpolation Approach Function
MehrWalter Buchmayr Ges.m.b.H.
Seite 1/10 Chapter Description Page 1 Advantages 3 2 Performance description 4 3 Settings 5 4 Options 6 5 Technical data 7 6 Pictures 8 http://members.aon.at/buchmayrgmbh e-mail: walter.buchmayr.gmbh@aon.at
Mehrjasimasolutions Simulation based process optimization for the agri food sector jasimabeverageplanner jasima Solutions Spin Off from
jasima Solutions Spin Off from BIBA - Bremer Institut für Produktion und Logistik GmbH Simulation based process optimization for the agri food sector jasimabeverageplanner Torsten Hildebrandt Torsten.Hildebrandt@.de
MehrGeschäftsprozesse und Regeln
Geschäftsprozesse und Regeln 7 Szenarien einer möglichen Integration Jana Koehler Hochschule Luzern Lucerne University of Applied Sciences and Arts jana.koehler@hslu.ch Gartner: Organizations struggle
MehrPRODUKT PROZESS PROFIT PRODUCT PROCESS PROFIT
PRODUKT PROZESS PROFIT PRODUCT PROCESS PROFIT OPTISCHE PRÜFSYSTEME AUS JENA OPTICAL TESTING SYSTEMS FROM JENA ALLES AUS EINER HAND EVERYTHING FROM A SINGLE SOURCE Der Erfolg der OTTO Vision Technology
MehrCommunications & Networking Accessories
3Com10 Mbit (Combo) 3Com world leading in network technologies is a strategic partner of Fujitsu Siemens Computers. Therefore it is possible for Fujitsu Siemens Computers to offer the very latest in mobile
MehrLRED and Value Chain Promotion
LRED and Value Chain Promotion combining spatial and sectoral perspectives on economic development Andreas Springer-Heinze GTZ Head Office Division Agriculture, Food and Fisheries Abteilung Agrarwirtschaft,
MehrDIPLOMARBEIT. Angefertigt bei: KPMG Deutsche Treuhand-Gesellschaft AG Advisory. Herr Prof. Dr. Liebstückel. Abgabetermin: 23.
FACHHOCHSCHULE WÜRZBURG-SCHWEINFURT FACHBEREICH INFORMATIK UND WIRTSCHAFTSINFORMATIK DIPLOMARBEIT Vorgelegt an der Fachhochschule Würzburg-Schweinfurt im Fachbereich Informatik und Wirtschaftsinformatik
MehrÜbersicht. Normung von Software in der Medizin. Vorstellung der DKE. Vorstellung der Normungsgremien. Normen im Bereich Software.
Normung von Software in der Medizin Übersicht Vorstellung der DKE Vorstellung der Normungsgremien Normen im Bereich Software Zukunftstrends 20.09.2013/1 Vorstellung der DKE Gemeinnütziger Verband ohne
MehrSchilder. Willkommen in der. fabrik...
Schilder Willkommen in der fabrik... Unsere Tradition hat uns geprägt... Schilder Schilder stellen in unserem Alltag eine wichtige Informationsquelle und Orientierungshilfe dar. Vor allem in Form von Kfz-Kennzeichen
MehrPossible Contributions to Subtask B Quality Procedure
Possible Contributions to Subtask B Quality Procedure aeteba - Energy Systems, Germany Elmar Sporer zafh.net Stuttgart, Germany Dr. Dirk Pietruschka 1/14 aeteba - Consortium of different companies - Turnkey
MehrSmart Import for supplier projects
Release July 2014 Smart Import for supplier Wizard for receiving supplier in the versiondog system Tool for automated import, versioning and Check-In of files edited externally Enhanced user New-look overview
MehrExercise (Part II) Anastasia Mochalova, Lehrstuhl für ABWL und Wirtschaftsinformatik, Kath. Universität Eichstätt-Ingolstadt 1
Exercise (Part II) Notes: The exercise is based on Microsoft Dynamics CRM Online. For all screenshots: Copyright Microsoft Corporation. The sign ## is you personal number to be used in all exercises. All
MehrFranke & Bornberg award AachenMünchener private annuity insurance schemes top grades
Franke & Bornberg award private annuity insurance schemes top grades Press Release, December 22, 2009 WUNSCHPOLICE STRATEGIE No. 1 gets best possible grade FFF ( Excellent ) WUNSCHPOLICE conventional annuity
MehrTurning Data Into Insights Into Value. Process Mining. Introduction to KPMG Process Mining
Turning Data Into Insights Into Value Process Mining Introduction to KPMG Process Mining Overview: KPMG Process Mining The Process Mining Technology Business Challenges Our Approaches TARGETED MEASURES
MehrISO 15504 Reference Model
Prozess Dimension von SPICE/ISO 15504 Process flow Remarks Role Documents, data, tools input, output Start Define purpose and scope Define process overview Define process details Define roles no Define
MehrHighlights versiondog 3.1
Highlights versiondog 3.1 Release June 2014 Smart Import for supplier Wizard for receiving supplier in the versiondog system Tool for automated import, versioning and Check-In of files edited externally
MehrFrontend Migration from JSP to Eclipse Scout
Frontend Migration from JSP to Eclipse Scout Peter Nüdling Raiffeisen Schweiz Jérémie Bresson, Peter Barthazy BSI Business Systems Integration AG Eclipse Finance Day, Zürich, 31. Oktober 2014 Seite 1 WebKat:
MehrBig Data Analytics. Fifth Munich Data Protection Day, March 23, Dr. Stefan Krätschmer, Data Privacy Officer, Europe, IBM
Big Data Analytics Fifth Munich Data Protection Day, March 23, 2017 C Dr. Stefan Krätschmer, Data Privacy Officer, Europe, IBM Big Data Use Cases Customer focused - Targeted advertising / banners - Analysis
MehrISO SPICE Erste Eindrücke
ISO 15504 SPICE Erste Eindrücke Klaus Franz Muth Partners GmbH, Wiesbaden 06122 5981-0 www.muthpartners.de klaus.franz@muthpartners.de SPiCE ISO 15504 1 Stand der Dinge 29. Januar 2005 ISO/IEC 15504 PUBLICATION
MehrBest Practice 4.0 Industrie & Forschung. Thomas Moser
Best Practice 4.0 Industrie & Forschung Thomas Moser WELCOME! Best Practice 4.0 Thomas Moser 4.11.2015 2 Agenda Welcome and Introduction 13:15 13:20: Welcome & Agenda (Thomas Moser, FH St. Pölten) 13:20
MehrGerman translation: technology
A. Starter Write the gender and the English translation for each word, using a dictionary if needed. Gender (der/die/das) German English Handy Computer Internet WLAN-Verbindung Nachricht Drucker Medien
MehrContent Workshop. Material-Efficiency in Swiss Industry based on systematic Ecodesign
-Efficiency in Swiss Industry based on systematic Ecodesign 3 Case industrial Cases with big potential Workshop Organisers: Content Workshop Openingspeech: Bruno Oberle, Director of the Swiss Federal Office
MehrProductronica Halle 5
Productronica Halle 5 Fertigungslinie Polymer Elektronik Flow Chart of a Polymer Electronic Line Demolinie Productronica 2005 Floorplan Stand B5-255 2,0 m 2,5 m Firmenstände Bar stool Working desk FhG-IZM-M
MehrDr. Franz Heffeter. An Innovative Approach To Vocational Education and Training
Dr. Franz Heffeter An Innovative Approach To Vocational Education and Training 1 Project Partners Volkshochschule Papenburg ggmbh Koordination, Valorisierung, Untersuchungen zur Fortbildung Tourismusfachwirt/in
MehrConsultant Profile Anja Beenen (née Weidemann) Experience
Consultant Profile Anja Beenen (née Weidemann) Profil M Beratung für Human Resources Management GmbH & Co. KG Berliner Straße 131 42929 Wermelskirchen Telephone: (+49) 21 96 / 70 68 204 Telefax: (+49)
MehrEduNet InterAction Developments in Smart Linked Automation Science meets Industry
EduNet InterAction 2016 Developments in Smart Linked Automation Science meets Industry 7. bis 9. September 2016 Die Veranstaltung für Wissenschaft und Industrie Smart Linked Automation Business Cases and
MehrMitglied der Leibniz-Gemeinschaft
Methods of research into dictionary use: online questionnaires Annette Klosa (Institut für Deutsche Sprache, Mannheim) 5. Arbeitstreffen Netzwerk Internetlexikografie, Leiden, 25./26. März 2013 Content
MehrCoaching Agile Development Teams
Coaching Agile Development Teams Josef Scherer Solution Focused Scrum Coach josef.scherer@gmail.com http://agile-scrum.de/ Scherer IT Consulting Freiberuflicher Scrum Coach Lösungsfokussierter Berater
MehrSAP mit Microsoft SharePoint / Office
SAP mit Microsoft SharePoint / Office Customer Holger Bruchelt, SAP SE 3. Mai 2016 Disclaimer Die in diesem Dokument enthaltenen Informationen können ohne vorherige Ankündigung geändert werden. Dieses
MehrPatrick Dittmer, Bremer Institut für Produktion und Logistik GmbH SIMKAB SIMPLIFIED CABIN RFID FOR VALUE CHAIN VISIBILITY IN CARGO
Patrick Dittmer, Bremer Institut für Produktion und Logistik GmbH SIMKAB SIMPLIFIED CABIN RFID FOR VALUE CHAIN VISIBILITY IN CARGO Agenda BIBA Motivation Air cargo processes Air cargo and AutoID Research
MehrLABOr: Europäisches Knowledge Centre zur beruflichen Ausbildung und Beschäftigung von Menschen mit Lernbehinderungen
Beschäftigung von Menschen mit Lernbehinderungen EUR/01/C/F/RF-84801 1 Projektinformationen Titel: Projektnummer: LABOr: Europäisches Knowledge Centre zur beruflichen Ausbildung und Beschäftigung von Menschen
MehrPraktikum Entwicklung Mediensysteme (für Master)
Praktikum Entwicklung Mediensysteme (für Master) Organisatorisches Today Schedule Organizational Stuff Introduction to Android Exercise 1 2 Schedule Phase 1 Individual Phase: Introduction to basics about
MehrGAUSS towards a common certification process for GNSS applications using the European Satellite System Galileo
GAUSS towards a common certification process for GNSS applications using the European Satellite System Galileo Matthias Grimm, Dr. Michael Meyer zu Hörste Vortragstitel > 11. Juni 2010 > Folie 1 Agenda
MehrSARA 1. Project Meeting
SARA 1. Project Meeting Energy Concepts, BMS and Monitoring Integration of Simulation Assisted Control Systems for Innovative Energy Devices Prof. Dr. Ursula Eicker Dr. Jürgen Schumacher Dirk Pietruschka,
MehrDokumentation (ISO 26514) Prof. Sissi Closs Donnerstag,, 5. November 2009
Der neue ISO-Standard Standard für f r Software- Dokumentation (ISO 26514) Prof. Sissi Closs Donnerstag,, 5. November 2009 ISO/IEC 26514 Software and systems engineering User documentation requirements
MehrSoftwarearchitektur mit dem Quasar- Architekturstil
Softwarearchitektur mit dem Quasar- Architekturstil Prof. Dr. U. Aßmann Technische Universität Dresden Institut für Software- und Multimediatechnik Lehrstuhl Softwaretechnologie http://www-st.inf.tu-dresden.de
Mehr