Retractable undercarriage by FEMA for self launching large model gliders with nose drive (FES).

Transkript

1 Retractable undercarriage by FEMA for self launching large model gliders with nose drive (FES). Following the general trend that more and more large model gliders are equipped with a nosemounted motor, this retractable undercarriage represents the perfect solution. We extended the rocker arm by 30 mm to guarantee a smooth take off from the ground for large model it can be mounted in such a way that the rocking arm can be retracted in the direction of the fl ight. The retractable undercarriage is suited for wheels with a diameter of 112 and 127 mm and is essentially identical with the well-proven retractable undercarriage of type 9810A. Dimensional drawing: Measurements in mm Servo holder Bracket Stock number A B C D E F Weight* Model weight 9860/FES g 8-20 kg 9870/FES g 5-12 kg *without wheel, servo holder and bracket

2 Stock number Item FES/ for wheel diameter 127 and 112 mm, for models to a scale of 2.5 to 3,2 9860/FES assembled completely without wheel and bow. 9863/FES assembled completely with FEMAwheel 112mm diameter and bow. 9864/FES assembled completely with FEMAwheel 127mm diameter and bow 9860/10 wheel brake for wheel diameter of 112mm. 9860/11 wheel brake for wheel diameter of 127mm. Any other accessories are identical with the accessories for the product range of 9810A. FES/ for wheel diameter 100 and 90 mm, for models to a scale of 3,3 to 3,7 9870/FES 9873/FES 9874/FES 9870/ /11 assembled completely without wheel and bow. Recommended servo for the activation of the the landing gear FEMA s retractable undercarriages are equipped with a balance spring, and thus only a minimum effort is required to extend and retract the landing gear. A higher effort is needed to open the landing gear door as it is activated by the landing gear. Basically every standard servo with a regulating time of more than 0.5 sec/40 is suited for the activation of the retractable landing gear. For a smooth motion sequence we recommend a low-speed steering servo with an amplitude of 180. The use of the Z-shaped servo mount with stock number 9890/60 and the angled clevis with stock number 9890/62 guarantees an ideal straight linkage. If you mount the landing gear doors according to our suggested installation we recommend the following torque for the servo: Model 9800A Ncm Model 9810A and 9860/FES Ncm Model 9820A and 9870/FES Ncm Model 9830A Ncm Recommended servo for the wheel brake: Model 9800A Ncm Model 9810A and 9860/FES Ncm Model 9820A and 9870/FES Ncm Model 9830A Ncm A servo with a torque of 40 Ncm. 4 kg 21/06/17

3 NEW! Made in Germany Today we introduce our new wheels programme that we developed according to your needs. By means of a complex tool development in co - operation with well-known rubber and plastics processors we managed to improve the quality notably compared to the present solid rubber wheels. Larger rims support the tire in case of lateral strain in an optimal way so that even extreme crosswind landings can be absorbed easily. All sizes are now supplied with guide grooves to keep your model on track. FEMA wheels with glass fi bre reinforced rims and aluminium hubs are designed to meet the highest demands and are suited for engine models as well as for large scale gliders. The wheels are extremely resilient and have ideal damping features. Even the load of the model weight for several hours in midsummer temperatures does not lead to the dreaded fl at tire. Despite their extreme stability, the wheels are very light. With FEMA wheels you don t have to worry about infl ating the valves. Neu: FEMAwheels plus We improved the rubber quality of our wheels and could thus signifi cantly increase the resilience as well as the abrasion and tear resistance. Stock number Ø Wheel width Hub width Weight Hub bore 9920/90 90 mm 32 mm 40 mm 95 gr. 6,1 9920/ mm 36 mm 40 mm 105 gr. 6,1 9920/ mm 40 mm 40 mm 135 gr. 6,1 9920/ mm 44 mm 44 mm 175 gr 6,1 9920/ mm 48 mm 44 mm 220 gr 6,1 9920/ mm 50 mm 44 mm 270 gr. 8,1 9920/ mm 53 mm 44 mm 310 gr. 8,1 9920/ mm 56 mm 44 mm 350 gr. 8,1

4 Axles for models with engine pair Tempering steel axles 6mm for models up to a weight of 12 kg pair Tempering steel axles 8mm for models up to a weight of 20 kg. We deliver axles for models with engine made out of high-quality tempering steel that match our solid tire wheels of a diameter of mm and a hub diameter of 6.1/8.1mm. The threaded length is measured in such a way that it is possible to attach also the wheel cover. A nut secures the attachment of the wheel. The bearing of the axle is made out of high-quality aluminium and has a diameter of 10/12 mm. The axle is attached to the smooth stem in order to avoid a notch effect that is common at an attachment at the thread. d1 d2 B A C D1 D2 Dimensionchart/weight (Dimensions in mm) Typ A B C d1 d2 D1 D2 Weight M6 10 M10 55 gr. Gas springs For the universal implementation in model making, i.e. undercarriages, self launch system, cockpit canopy, etc. Borehole of 6.1mm on both sides Stock no. resilience spring defl exion L N/ 5kg 20 mm 106, N/ 10kg 20 mm 106, N/ 15kg 20 mm 106, N/ 20kg 20 mm 106, N/ 30kg 20 mm 106, N/ 40kg 20 mm 106,5 Stock no. resilience spring defl exion L N/ 5kg 40 mm 146, N/ 10kg 40 mm 146, N/ 15kg 40 mm 146, N/ 20kg 40 mm 146, N/ 30kg 40 mm 146, N/ 40kg 40 mm 146,5 6,1 6,1 Ø M8 12 M12 95 gr. Ø 6 spring deflexion L 15/12/16

5 Best.Nr A/ASG-29 Tangent Komplettset für ASG-29, 6 m Spannweite und vergleichbare Modelle, bestehend aus: 9814A komplett montiert mit VG-Rad-127 mm Ø und Bügel 9890/60 Z-Servohalter fertig bearbeitet für alle Standard-Servos, 40 x 20 mm 9890/62 Gewinkelter Gabelkopf mit Gewindestange M3 9810/11 Radbremse für Rad-Ø 127 mm 9890/22 Umlenkhebel für Radbremse, passend zu allen EZFW 9890/64 L-Servohalter fertig bearbeitet für alle Standard-Servos, 40 x 20 mm 9810/14 Radabdeckung für Rad-Ø mm 9810/15 Ergänzungsset für gefederten Einbau ohne Gasdruckfeder 9890/200 Gasdruckfeder 200N Federkraft, Bohrungen 6/8 mm 9890/300 Gasdruckfeder 300N Federkraft, Bohrungen 6/8 mm Stock number 9814 A/ASG-29 Tangent Complete Set for ASG-29, 6 m wingspan and comparable models 9814A assembled completely with VG-wheel -127 mm diameter and bow 9890/60 Z-shaped servo mount, suitable for all standard servos, 40 x 20 mm 9890/62 Angled clevis with threaded rod M3 9810/11 wheel brake for wheel diameter of 127 mm 9890/64 L-shaped servo mount, suitable for all standard servos 40 x 20 mm 9810/14 Wheel cover from glass for wheel diameter of mm 9810/15 additional kit for spring-loaded mounting without gas pressure spring 9890/200 gas pressure spring, 200N springiness 9890/300 gas pressure spring, 300N springiness

6 Neu: FEMA-EZFW für eigenstartfähige Großsegler mit Nasenantrieb (FES). Best.Nr. 9864/ASG-29 Tangent Komplettset für ASG-29, 6 m Spannweite und vergleichbare Modelle, bestehend aus: 9864 komplett montiert mit FEMAwheels -127 mm Ø und Bügel 9890/60 Z-Servohalter fertig bearbeitet für alle Standard-Servos, 40 x 20 mm 9890/62 Gewinkelter Gabelkopf mit Gewindestange M3 9864/11 Radbremse für Rad-Ø 127 mm 9890/22 Umlenkhebel für Radbremse, passend zu allen EZFW 9890/64 L-Servohalter fertig bearbeitet für alle Standard-Servos, 40 x 20 mm 9810/14 Radabdeckung für Rad-Ø mm 9810/15 Ergänzungsset für gefederten Einbau ohne Gasdruckfeder 9890/200 Gasdruckfeder 200N Federkraft, Bohrungen 6/8 mm 9890/300 Gasdruckfeder 300N Federkraft, Bohrungen 6/8 mm New: Retractable undercarriage by FEMA for self launching large model gliders with nose drive (FES). Stock number 9864 /ASG-29 Tangent Complete Set for ASG-29, 6 m wingspan and comparable models 9864 assembled completely with FEMAwheel -127 mm diameter and bow 9890/60 Z-shaped servo mount, fi nished for all standard servos, 40 x 20 mm 9890/62 Angled clevis with threaded rod M3 9864/11 wheel brake for wheel diameter of 127 mm 9890/64 L-shaped servo mount, fi nished for all standard servos 40 x 20 mm 9810/14 Wheel cover from glass for wheel diameter of mm 9810/15 additional kit for spring-loaded mounting without gas pressure spring 9890/200 gas pressure spring, 200N springiness 9890/300 gas pressure spring, 300N springiness

7 Best.Nr. 9824A/ASH-26 Tangent Komplettset für ASH-26, 5 m Spannweite und vergleichbare Modelle, bestehend aus: 9824A komplett montiert mit FEMAwheels -100 mm Ø und Bügel 9890/60 Z-Servohalter fertig bearbeitet für alle Standard-Servos, 40 x 20 mm 9890/62 Gewinkelter Gabelkopf mit Gewindestange M3 9864/11 Radbremse für Rad-Ø 100 mm 9890/22 Umlenkhebel für Radbremse, passend zu allen EZFW 9890/64 L-Servohalter fertig bearbeitet für alle Standard-Servos, 40 x 20 mm 9810/14 Radabdeckung für Rad-Ø mm 9810/15 Ergänzungsset für gefederten Einbau ohne Gasdruckfeder 9890/400 Gasdruckfeder 400N Federkraft, Bohrungen 6/8 mm Stock number 9824A/ASH-26 Tangent Complete Set for ASH-26, 5 m wingspan and comparable models 9864A assembled completely with VG-wheel -100 mm diameter and bow 9890/60 Z-shaped servo mount, fi nished for all standard servos, 40 x 20 mm 9890/62 Angled clevis with threaded rod M3 9864/11 wheel brake for wheel diameter of 100 mm 9890/64 L-shaped servo mount, fi nished for all standard servos 40 x 20 mm 9810/14 Wheel cover from glass for wheel diameter of mm 9810/15 additional kit for spring-loaded mounting without gas pressure spring 9890/400 gas pressure spring, 400N springiness

8 Best.Nr. 9874FES/ASH-26 Tangent Komplettset für ASH-26, 5 m Spannweite und vergleichbare Modelle, bestehend aus: 9874/FES komplett montiert mit FEMAwheels -100 mm Ø und Bügel 9890/60 Z-Servohalter fertig bearbeitet für alle Standard-Servos, 40 x 20 mm 9890/62 Gewinkelter Gabelkopf mit Gewindestange M3 9864/11 Radbremse für Rad-Ø 100 mm 9890/22 Umlenkhebel für Radbremse, passend zu allen EZFW 9890/64 L-Servohalter fertig bearbeitet für alle Standard-Servos, 40 x 20 mm 9810/14 Radabdeckung für Rad-Ø mm 9810/15 Ergänzungsset für gefederten Einbau ohne Gasdruckfeder 9890/400 Gasdruckfeder 400N Federkraft, Bohrungen 6/8 mm Stock number 9874FES/ASH-26 Tangent Complete Set for ASH-26, 5 m wingspan and comparable models 9874/FES assembled completely with FEMAwheel -100 mm diameter and bow 9890/60 Z-shaped servo mount, fi nished for all standard servos, 40 x 20 mm 9890/62 Angled clevis with threaded rod M3 9864/11 wheel brake for wheel diameter of 100 mm 9890/64 L-shaped servo mount, fi nished for all standard servos 40 x 20 mm 9810/14 Wheel cover from glass for wheel diameter of mm 9810/15 additional kit for spring-loaded mounting without gas pressure spring 9890/400 gas pressure spring, 400N springiness

9 Best.Nr A/ASH 31 MI Tangent Komplettset für ASH 31 MI, 4,5 m Spannweite und vergleichbare Modelle, bestehend aus : 9834A komplett montiert mit VG-Rad 82 mm Ø und Bügel 9890/60 Z-Servohalter fertig bearbeitet für alle Standard-Servos, 40 X 20 mm 9890/62 gewinkelter Gabelkopf mit Gewindestange M3 9830/11 Radbremse für Rad-Ø 82 mm 9890/22 Umlenkhebe1 für Radbremce, passend zu allen EZFW 9890/64 L-Servohalter fertig bearbeitet für alle Standard-Servos, 40 X 20 mm 9830/14 Radabdeckung für Rad-Ø mm Stock number 9834 A/ASH 31 MI Tangent Complete Set for ASH 31 MI, 4,5 m wingspan and comparable models 9834A ascembled completely with VG-wheel 82 mm diameter and bow 9890/60 Z-shaped servo mount, fi nished for all standard servos, 40 X 20 mm 9890/62 angled clevis with threaded rod M3 9830/11 wheel brake for wheel diameter of 82 mm 9890/64 L-shaped servo mount, fi nished for all standard servos 40 X 20 mm 9830/14 wheel cover from glass for wheel diameter of mm