CANNON STANDARD Seite 1 von 5. CAI Industrial Circular Connector

Transkript

1 1.1 Ordering Information CANNON STANDARD Seite 1 von 5 C A I T P - B ) Modification Code 00 = Standard 01 = FKM-Sealing 10.) Plating 1 = A34 Nickel 2 = A240 Zinc-Nickel 9.) Coupling Mechanism B = Bayonet coupling S = Threaded coupling 8.) Alternate Insert Position Normal position 0 = - (dash) Available positions N, W, X, Y, Z 7.) Contact Type P = Pin S = Socket 6.) Number of Signal Contacts 5.) Number of Power Contacts 4.) Endbell Txx = Universal Endbell Mxx = Adaptor for metric cable fitting Pxx = Adaptor for Pg cable fitting Fxx = Adaptor for flex tube 3.) Shell Size 18, 20, 22, 24, 28, 32, 36 2.) Shell Style 00, 01, 02, X2, 06, 08, S6, S8, 20, 21

2 CANNON STANDARD Seite 2 von 5 1.) Series

3 CANNON STANDARD Seite 3 von 5 1.) Series = CA Industrial Connector 2.) Shell Style 00 = Wall Mounting Receptacle with connecting thread, threaded holes in flange, Rear Panel Mounting 80 = 90 Wall Mounting Receptacle with connecting thread, threaded holes in flange, Rear Panel Mounting 01 = Straight Plug, Cable Connection Plug 81 = 90 Plug, Cable Connection Plug 02 = Wall Mounting Receptacle, Front Panel Mounting X2 = Wall Mounting Receptacle, Front Panel Mounting with O-Ring (IPx9K) 06 = Straight Plug 08 = Plug 90 S6 = Straight Plug, Shielded S8 = Plug 90, Shielded 20 = Wall Mounting Receptacle, Rear Panel Mounting, with thread in flange hole 21 = Wall Mounting Receptacle, Rear Panel Mounting, with through holes in flange 3.) Shell Size ) Endbell T00 = without Endbell Txx Universal Endbell (IP69K) T07 = with Universal Endbell (IP69K), straight version: #20 T09 = with Universal Endbell (IP69K), straight version: #20 T11 = with Universal Endbell (IP69K), straight version: #18, #20 T13 = with Universal Endbell (IP69K), straight version: #18, #20, #22 T14 = with Universal Endbell (IP69K), straight version: #18, #20, #22, #28 T17 = with Universal Endbell (IP69K), straight version: #20, #22, #28 T19 = with Universal Endbell (IP69K), straight version: #22, #28 T20 = with Universal Endbell (IP69K), straight version: #28 (wire size 4,5 7,2mm) (wire size 6,5 9,3mm) (wire size 8,0 10,3mm) (wire size 9,0 12,5mm) (wire size 11,5 14,2mm) (wire size 14,5 16,6mm) (wire size 16,1 18,4mm) (wire size 17,8 20,0mm)

4 Mxx Adaptor for metric cable fitting CANNON STANDARD Seite 4 von 5 M25 = with adaptor for metric cable fitting, thread diameter M25x1,5 ; straight version: #18, #20 M32 = with adaptor for metric cable fitting, thread diameter M32x1,5 ; straight version: #22, #24, #28 M40 = with adaptor for metric cable fitting, thread diameter M40x1,5 ; straight version: #32, #36 Pxx Adaptor for PG cable fitting straight version P13 = adaptor for PG cable fitting, thread diameter PG13,5 ; straight version: #18 P16 = adaptor for PG cable fitting, thread diameter PG16 ; straight version: #20, #22, #24 P21 = adaptor for PG cable fitting, thread diameter PG21 ; straight version: #28 P29 = adaptor for PG cable fitting, thread diameter PG29 ; straight version: #32, #36 Pxx Adaptor for PG cable fitting 90 version P16 = adaptor for PG cable fitting, thread diameter PG16 ; 90 version: #18 P21 = adaptor for PG cable fitting, thread diameter PG21 ; 90 version: #20 and #22 F01 = Adaptor for flex tube F02 = Cable clamp

5 CANNON STANDARD Seite 5 von 5 10.) Plating 1 = A34 Nickel according CAS35009-NI01 (Standard) 2 = A240 Zinc-Nickel, iridescent blue according CAS ) Modification Code 00 = CR-Sealing (Standard) 01 = FKM-Sealing 02 = Flow solder contact (for housing type 20 and 02)