SYSTEM COMPONENTS FOR 3~ RECESSED TRACK STANDARD 3~ RECESSED TRACK STANDARD. 3~ Recessed Track Standard

Transkript

1 3~ RECESSED TRACK STANDARD Ceiling cut ~ Recessed Track Standard 41 A 5-conductor recessed track with 3 separately switchable circuits and a data bus track. It consists of an extruded aluminum profile which also functions as earth and two inserted plastic profiles carrying 4 embedded 2.5 mm 2 copper conductors. Any given profile can be easily cut to length on site. It is not necessary to cut back or bend back the copper wire. The track has pre-punched holes for mounting. They may be used within hand reach. Arrow-shaped suspensions are provided for the use with profile snap hangers. Multi Adaptors with bus contacts can use the normal 3-circuit feed. in this case there is no DALI function. 3~ recessed track standard white powder coated 2m 3m 4m Mechanical load see p. 42 D V E Electrical connection and connection data see p. 40 m Can be cut on site Weight per meter: 1,3 kg System Components for 3~ Recessed Track Standard Live end with flange Earth contact left Earth contact rights Concealed live end, fits into the track profile, with cable set, terminal box and connectors Concealed connector, for OEM only, without illustration white (last digit 1) black (last digit 2) silver (last digit 3) EUTRAC 21 Mid feed Electrical and mechanical straight coupler, recessed Electrical straight coupler L coupler, Earth contact outside Earth contact inside T coupler, Earth contact left Earth contact right X coupler, gold plated spring contacts End flange with flange End cap, and recessed in profile Profile snap hanger for tension grip 6 pcs Suspension for M6 thread mounting SYSTEM COMPONENTS FOR 3~ RECESSED TRACK STANDARD

2 Mon tageanlei tung -Beim Kijrzen nur das nicht Etikettierte Ende absagen. -When cutting do not cut-off fi

3 'G- CEe!o 4% - Die Kunststoff-Strombohn und Kupferleiter mussen um min. 2mm kurzer sein als die Alu-Schiene. Bei bauseitigem Zuschnitt entsprechend kurzen. - The plastic track and copper conductors must be shorter than the aluminium track by at least 2mm. Shorten if track is cut to length on site.

4 '2

5 V *=I x 16A 0-- :@ an. =3 x 1.5 mm 2 L _ glx. =3 x 2.5 mm 2 8 Anschlufl am Wechsektromnetz 230V (240V) Hochstbelastung : 3600W (3800W). Gesamtbelastung kann beliebig auf die 3 Stromkreise verteilt werden. Absicherung 1 x 16A. Zuleitung (min.): 3 x 1.5mm 2 (max.): 3 x 2.5mm Anschlun am Drehstromnetz 4OOV (415V) Hochstbelastung : 3 x 3600W (3800W) = 10800W (11400W) Einzelabsicherung aller drei Phasen. Absicherung 3 x 16A. Zuleitung (min.): 5 x 1.5mm 2 (max.): 5 x 2.5mm 2 Belastbarkeit der Einspeiser: Alle Einspeiser sind @ For 230V (240V) alternating current Maximum load: 3600W (3800W). Load can be distributed over the three circuits ot will. Fuser: 1 x 16A. Supply cable (minimum): 3 x 1,5mm 2 (maximum): 3 x 2.5mm For 400 V (4% V) three-phase current Maximum load: 3 x 3600W (3800W) = 10800W (11400W) Each phase is separately fused., Fuse: 3 x 16A. Supply cable (minimum): 5 x 1,5mm2 (maximum): 5 x 2,5mm 2 Es liegt in dem Veranlworlungsbereich des Installateurs, die elektrische. mechanische und lhermische Verlraglichkeit zwischen dem Slromschienen- System und den daran angebrachten Leuchten sicherzustellen. Im Deckenbereich nur baupolizeilich zugelassenes Befestigungsmaterial verwenden. Mantage nur durch Fachpersonal Es ist zwingend notwendig, die Stromschienenenden mit Endabdeckung bzw. Schutzkappen zu verschliessen. 1 It is the responsibility of the inslaller to ensure the electrical, mechanical and the thermal compartiblity of the track system and Ihe Fixtures. Materials used far ceiling fixation should conform lo relevanl building regulalians. To be installed by trained personnel only It is essential to cover Ihe ends of the track with end covers or orotective coos I I