Transport trolleys Series K professional. professional. Example for load distribution on 14 tons trolley combination: Advantages in detail

Größe: px

Ab Seite anzeigen:

Download "Transport trolleys Series K professional. professional. Example for load distribution on 14 tons trolley combination: Advantages in detail"

Benjamin Frei
vor 6 Jahren
Abrufe

Transport troeys Series K professiona Transport troeys Series K professiona or oad weights up to 2 metric tons or oad weights up to 2 metric tons JL 7 K JL 14 K JL 10 K J

The doube roer design resuts in dramaticay easier steering due to reduced friction forces in curves.

Higher capacity at same dimension as Series K troeys.

oad cassettes and connecting rod. Non-marking support whees. The Series K hande bars are now aso avaiabe with a removabe hande. (See on page 31).

K 7 000 15 400 2x 3 500 2x 7700 10 000 22 000 2x 5 000 2x 11 000 12 12 175 x 170 6.9 x 6.7 175 x 170 6.9 x 6.7 assette dimensions x 325 x 200 12. x 7.9 325 x 390 12. x 15.

3 Handebar with puing eye 1 120 44.1 1 120 44.1 Weight professiona Order-no.

1 Transport troeys Series K professiona Transport troeys Series K professiona or oad weights up to 2 metric tons or oad weights up to 2 metric tons JL 7 K JL 14 K JL 10 K J 7 K J 14 K J 10 K xampe for oad distribution on 14 tons troey combination: Avaiabe with: Professiona castor JUWAthan pus coated auminium castor Pease refer to page for additiona roer information. Inspection accordingy technica reguation ANSI/ASM (USA) Advantages in detai Gavanized axes and safety cip rings for improved protection against corrosion. The doube roer design resuts in dramaticay easier steering due to reduced friction forces in curves. The much ower friction resistance aso causes the roers on the rear axis to foow in a truer course. You need 30 % ess power for steering. Higher capacity at same dimension as Series K troeys. A transport troeys are ready for use: Steerabe transport troey incudes ba bearing supported turntabe and a handebar, the adjustabe-width transport troey consists of two oad cassettes and connecting rod. Non-marking support whees. The Series K hande bars are now aso avaiabe with a removabe hande. (See on page 31). for any foors Order number D 7 to 14 to Removabe hande 3,5 to 3,5 to 14 metric tons astors dimensions xi itting height x 20 metric tons JL 7 K J 7 K JL 10 K J 10 K x x x x x x x x 6.7 assette dimensions x 325 x x x x 15.4 onnecting rod with joint assettes adjustabe from - to Supporting surface of turnabe x 445x x x x 32.3 Handebar with puing eye Weight professiona Order-no. with professiona Inspection accordingy technica reguation ANSI/ASM (USA) astors with ba bearings guarantee easy motion D D D D 20 2 metric tons astor dimensions xi itting height JL 14 K J 14 K x x x x x x x 175 x x 6.7 assette dimensions x 325 x x 15.4 onnecting rod with joint assettes adjustabe from - to Suporting surface of turntabe x 50 x x 39,3 Handebar with puing eye Weight professiona Order-no. with professiona D D

Transport troeys Series G professiona or oad weights up to 60 metric tons Transport troeys Series G professiona or oad weights up to 60 metric tons JL 22 G JL 30 G J 22 G J 30 G Avaiabe with:

J 15 G Advantages in detai Pivoting roer cassettes within the frame assure even pressure distribution across a roers and across the foor. No need for compex and expensive hydrauic compensation system.

2 Transport troeys Series G professiona or oad weights up to 60 metric tons Transport troeys Series G professiona or oad weights up to 60 metric tons JL 22 G JL 30 G J 22 G J 30 G Avaiabe with: JUWAthan pus-coated auminium core for any foors Order number JL 15 G Pease refer to page for additiona roer information. J 15 G Advantages in detai Pivoting roer cassettes within the frame assure even pressure distribution across a roers and across the foor. No need for compex and expensive hydrauic compensation system. The doube roer design resuts in dramaticay easier steering due to reduced friction forces in curves. The much ower friction resistance aso causes the roers on the rear axis to foow in a truer course. A transport troeys are ready for use: The steerabe transport troey is fitted with a ba bearing supported turntabe and a handebar (as shown in picture). The adjustabe-width transport troey consists of two transport units and connecting rod. 30 metric tons 45 metric tons JL 15 G J 15 G JL 22 G J 22 G kg bs x x x x astor dimensions x I mm in 140 x x x x x x x x 2.3 itting height mm in x mm in 220 x x x x 7. assette dimensons L 2 x 2 mm in 460 x x x x 20.6 onnecting rod with joint mm in 2 x x assettes adjustabe from - to G - H mm in Supporting surface of turnabe mm in L 1 x 1 mm in 565 x x x x 3.6 Handebar with puing eye mm in Weight JUWAthan pus kg bs Order-no. with JUWAthan pus metric tons JL 30 G J 30 G kg bs x x astor dimensions x mm in 140 x x x x 2.3 itting height mm in x mm in 220 x x 7. assette dimensons L 2 x 2 mm in 460 x x 20.6 onnecting rod with joint mm in 2 x assettes adjustabe from - to G - H mm in Supporting surface of turntabe mm in L 1 x 1 mm in 750 x x61 Handebar with puing eye mm in Weight JUWAthan pus kg Order-no. with JUWAthan pus *other engths on request 29

Troeys Series H Troeys Series H up to 120 metric tons up to 0 metric tons JL 60 H JL 0 H Series S J 60 H J 0 H J 120 H JL 0 H Avaiabe with: Avaiabe with:

to page 32-33 for additiona roer information Outfitted with highest quaity roers as standard. Unrivaed: Sma and ightweight troeys at super high capacity.

A transport troeys are ready for use: The steerabe transport troey is fitted with a ba bearing supported turntabe and a handebar (as shown in picture).

J 0 H J 120 H 0 metric tons astors dimensions xi itting height JL 40 H J 40 H JL 60 H J 60 H 2x 20 000 2x 44 000 60 000 132 000 2x 30 000 2x 66 000 200 x 170 7.9 x 6.

6 onnecting rod with joint 2 x 3 000 11 2 x 3 000 11 1 630-3 30 64.1-132.9 1 630-3 30 64.1-132.9 assettes adjustabe from - to 55-1 155 23-45.5 700-2 00 27.6-110.

with JUWAthan Professiona 09 400 205-H 10 400 205-H 09 600 205-H 10 600 205-H 32 assettes adjustabe from - to 250 9. x 20 x 1 900 32.2 x 74.

with JUWAthan Professiona 09 00 205-H 10 00 205-H 10 912 205-H Supporting surface of turnabe 320 705 1 590 62.6 240 9.4 750 x 20 29.5 x 32.2 2x 1 540 60.6 1 590 62.

3 Troeys Series H Troeys Series H up to 120 metric tons up to 0 metric tons JL 60 H JL 0 H Series S J 60 H J 0 H J 120 H JL 0 H Avaiabe with: Avaiabe with: JUWAthan-coated stee castors JUWAthan-coated stee castors Advantages in detai for any foors Order number for any foors Order number Pease refer to page for additiona roer information Outfitted with highest quaity roers as standard. Unrivaed: Sma and ightweight troeys at super high capacity. Reduced weight through advanced construction of frames. A transport troeys are ready for use: The steerabe transport troey is fitted with a ba bearing supported turntabe and a handebar (as shown in picture). The adjustabe-width transport troey consists of two transport units and connecting rods. J 0 H J 120 H 0 metric tons astors dimensions xi itting height JL 40 H J 40 H JL 60 H J 60 H 2x x x x x x x x x x x x astors dimensions 960 x x 32.6 onnecting rod with joint 2 x x assettes adjustabe from - to Supporting surface of turnabe Order-no. with JUWAthan H H H H Order-no. with JUWAthan Professiona H H H H 32 assettes adjustabe from - to x 20 x x 74.7 Handebar with puing eye Order-no. with JUWAthan H H H Order-no. with JUWAthan Professiona H H H Supporting surface of turnabe x x x x x 22. 2x x x 6.7 x 740 x x 15.6 Weight JUWAthan pus 200 x x 6.7 assette dimensions 200 x x x x 11. x Handebar with puing eye J 120 H assette dimensions 650 x x 55.1 J 0 H x x 10.2 onnecting rod with joint 650 x x 41.7 JL 0 H x xi 120 metric tons x 395 x x 10.2 itting height 395 x x metric tons x metric tons Weight JUWAthan pus 33

NU Kreisefahrwerk JK auhöhe 110 mm JK 1,5 JK 3 Transportgewicht bis 1,5 to 3 to 3 to 6 to Typ Skizze JK 1,5 K JK 1,5 Set JK 3 K JK 3 Set estehend

43 5 x 43 5 x 43 5 x 43 inbauhöhe mm 110 110 110 110 Aufagefäche je Kassette mm 150 150 250 250 Abmessungen Kassette L 1 x 1 mm 465 x 490 575 x 460

mit JUWAmid 14 015 05-P 14 015 05-D 14 030 05-P 14 030 05-D orteie im Detai Optionae erbindungsstange kann ohne Werkzeug einfach über den

inbauhöhe passend zu Lenk- und Transportfahrwerken der Serie K. Ae Geräte auch im Set mit Zubehör (siehe Hauptkataog Seite 12) ieferbar.

Die ahrwerke JK 3-7,5 können an den dafür vorgesehenen Öffnungen mit Standard-Zurrgurten mit dem Transportgut verbunden werden.

4 NU Kreisefahrwerk JK auhöhe 110 mm JK 1,5 JK 3 Transportgewicht bis 1,5 to 3 to 3 to 6 to Typ Skizze JK 1,5 K JK 1,5 Set JK 3 K JK 3 Set estehend aus 1x JK 1,5 K 2x JK 1,5 K 1x JK 3 K 2x JK 3 K Tragast kg Anzah der Roen Stück 6 2 x 6 2 x Abmessungen der Roen x I mm 5 x 43 5 x 43 5 x 43 5 x 43 inbauhöhe mm Aufagefäche je Kassette mm Abmessungen Kassette L 1 x 1 mm 465 x x x x 460 Gewicht mit JUWAmid kg este-nr. mit JUWAmid P D P D orteie im Detai Optionae erbindungsstange kann ohne Werkzeug einfach über den Deichsehater am Tragegriff angekemmt werden. Geringes igengewicht bei geichzeitig hoher Tragast. Um 360 drehbar durch kugegeagerte Lenkroen. inbauhöhe passend zu Lenk- und Transportfahrwerken der Serie K. Ae Geräte auch im Set mit Zubehör (siehe Hauptkataog Seite 12) ieferbar. Konkurrenzos: Durch die geringe reite der Lenkroen wird der Lenk- und Drehwiderstand auf ein Minimum reduziert. Die ahrwerke JK 3-7,5 können an den dafür vorgesehenen Öffnungen mit Standard-Zurrgurten mit dem Transportgut verbunden werden. Zusätzich sind an den ahrwerken JK mittige ohrungen angebracht, um das ixieren des Transportguts zu ermögichen. Tipp: ei der Auswah des passenden Kreisefahrwerks empfehen wir eine Zuadung von ca. 2/3 der maximaen Tragast. Damit erhaten Sie den besten Kompromiss zwischen Zuadung, rgonomie und Handing der Geräte.

NU Kreisefahrwerk JK auhöhe 110 mm JK 4 JK 6 JK 7,5 Transportgewicht bis 4 to to 6 to 12 to Typ Skizze JK 4 K JK 4 Set

Stück 12 2 x 12 2 x Abmessungen der Roen x I mm 5 x 43 5 x 43 5 x 43 5 x 43 inbauhöhe mm 110 110 110 110 Aufagefäche je

Set estehend aus 1x JK 7,5 K 2x JK 7,5 K Skizze JK 4 Tragast kg 7 500 15 000 Anzah der Roen Stück 20 2 x 20 Abmessungen

5 NU Kreisefahrwerk JK auhöhe 110 mm JK 4 JK 6 JK 7,5 Transportgewicht bis 4 to to 6 to 12 to Typ Skizze JK 4 K JK 4 Set JK 6 K JK 6 Set estehend aus 1x JK 4 K 2x JK 4 K 1x JK 6 K 2x JK 6 K Tragast kg Anzah der Roen Stück 12 2 x 12 2 x Abmessungen der Roen x I mm 5 x 43 5 x 43 5 x 43 5 x 43 inbauhöhe mm Aufagefäche je Kassette mm Abmessungen Kassette L 1 x 1 mm 690 x x x x 525 Gewicht mit JUWAmid kg este-nr. mit JUWAmid P D P D Transportgewicht bis 7,5 to 15 to Typ Skizze JK 7,5 K JK 7,5 Set estehend aus 1x JK 7,5 K 2x JK 7,5 K Skizze JK 4 Tragast kg Anzah der Roen Stück 20 2 x 20 Abmessungen der Roen x I mm 5 x 43 5 x 43 inbauhöhe mm Aufagefäche je Kassette mm Abmessungen Kassette L 1 x 1 mm 910 x x 660 Gewicht mit JUWAmid kg 63,5 127 este-nr. mit JUWAmid P D Skizze JK 6

Jack Series JH-G pus Jack Series JH-G pus up to 10 metric tons up to 20 metric tons JH 6 G pus JH 10 G pus JH 15 G pus JH 10 G pus ku JH 20 G pus Inspection

friction through side shoes that are mobie in their seats. Under appication a arger contact surface guarantees better force distribution.

Reduced maintenance costs through easy to change side shoes and exchangeabe 6 pump unit.

2 ontinua adjustment to the oad through swiveing safety toe. Secure stabeness in every situation even in ifted position (see picture 2).

2 JH 6 G pus JH 10 G pus JH10 G pus ku JH 15 G pus JH 20 G pus u oad capacity* 6 000 13 200 10 000 22 000 10 000 22 000 u oad capacity* 15 000 33 000 20 000 44

2 10 7.1 13 5.4 Maximum ift toe height 205.1 225.9 Lift toe adjustment 6 x 29 1.1 5 x 41 1.6 4 x 41 1.6 Lift toe adjustment 5 x 46 1.

1 Toe depth 50 2.0 55 2.2 55 2.2 Toe depth 66 2.6 66 2.6 feet in front 326 12. 346 13.6 346 13.6 feet in front 415.3 425.7 feet on side 311 12.

6 Jack Series JH-G pus Jack Series JH-G pus up to 10 metric tons up to 20 metric tons JH 6 G pus JH 10 G pus JH 15 G pus JH 10 G pus ku JH 20 G pus Inspection accordingy technica reguation G D (German) and ANSI/ASM (USA) Inspection accordingy technica reguation G D (German) and ANSI/ASM (USA) Advantages in detai Reduced friction through side shoes that are mobie in their seats. Under appication a arger contact surface guarantees better force distribution. The resuting advantages are ess friction, more power and reduced wear of the ifting 1 track than with conventiona jacks (see picture 1). Reduced maintenance costs through easy to change side shoes and exchangeabe 6 pump unit. xtremey ightweight with high performance through the use of high-quaity materia and innovative design changes. 2 ontinua adjustment to the oad through swiveing safety toe. Secure stabeness in every situation even in ifted position (see picture 2). JH 15 / JH 20 G pus seria outfitted with fast stroke. Aso avaiabe with spring return. H1/H2 H2 v H1/H2 H1 JH 10 G pus combined with our new Muti-Purposed troeys. 2 JH 6 G pus JH 10 G pus JH10 G pus ku JH 15 G pus JH 20 G pus u oad capacity* u oad capacity* Stroke Stroke Minimum ift toe height Minimum ift toe height Maximum ift toe height Maximum ift toe height Lift toe adjustment 6 x x x Lift toe adjustment 5 x x 51 2 Top pate height H Top pate height H Toe width front ,4 60 2,4 Toe width front Toe depth Toe depth feet in front feet in front feet on side feet on side Width Width Height H2 Height H L in3 0, , yinder voume L in3 0, , , Weight Order number *oad on top pate G G G ku yinder voume Weight Order number *oad on top pate G G 6

Ähnliche Dokumente

Transportfahrwerke Load moving systems. Pulverbeschichtete bzw. verzinkte Oberflächen Powder coated or zinc plated surfaces

Transportfahrwerke Load moving systems. Pulverbeschichtete bzw. verzinkte Oberflächen Powder coated or zinc plated surfaces CO Skate Transportfahrwerke oad moving systems 1 2 3 4 7 5 esonderheiten des COSkate COSkate Technology Kompakte auweise Compact design 1 ochwertige Polyurethanrollen serienmäßig igh quality Polyurethane