TECHNICAL CATALOG TECHNISCHER KATALOG Specifications and Dimensions Spezifikationen und Abmessungen
CONTENT INHALT PAGE SEITE DESCRIPTION BESCHREIBUNG Specifications Spezifikationen 27 Tubes Rohre Elbows Bögen 9 T-Pieces T-Stücke 5 Reducers Reduzierungen 6 Endcaps Kappen 65 Ferrules Stutzen 7 COAX COAX 8 Information Information 2 www.dockweiler.com 0/205
SPECIFICATIONS SPEZIFIKATIONEN 0/205 www.dockweiler.com
SPECIFICATION SPEZIFIKATION safetron Liquid APPLICATIONS Safetron is especially for the production and the transport of sensitive media. It is primariliy used in the pharma and biotechnological industries for WFI, serums and parenteral drugs. ANWENDUNGEN Safetron ist speziell für die Produktion und den Transport sensibler Medien entwickelt worden. Es wird hauptsächlich eingesetzt in der Pharmaindustrie und Biotechnologie bei der Produktion von WFI, Seren und Parenteralia. PHARMACEUTICAL INDUSTRY PHARMAZEUTISCHE INDUSTRIE BIOTECHNOLOGICAL INDUSTRY BIOTECHNOLOGIE DIMENSIONS All tubes and fittings are available from stock in the following sizes: Imperial (acc. to ASTM A269 / A270 and DIN 866 Series C) / 4 " (0,250 inch x 0,05 inch) to 6" (6,000 inch x 0,09 inch) 6,5 mm x 0,89 mm to 52,40 mm x 2,77 mm ISO (acc. to DIN EN ISO 27 and DIN 866 Series B),50 mm x,60 mm to 29,0 mm x 2,60 mm Other dimensions, e.g. metric, on request. ABMESSUNGEN Alle Rohre und Formteile sind in den folgenden Abmessungen ab Lager bei uns erhältlich: Imperial (nach ASTM A269 / A270 und DIN 866 Reihe C) / 4 " (0,250 inch x 0,05 inch) bis 6" (6,000 inch x 0,09 inch) 6,5 mm x 0,89 mm bis 52,40 mm x 2,77 mm ISO (nach DIN EN ISO 27 und DIN 866 Reihe B),50 mm x,60 mm bis 29,0 mm x 2,60 mm Weitere Abmessungen (z. B. metrisch) auf Anfrage. TECHNICAL TERMS OF DELIVERY Tubes and fittings are prepared for orbital welding acc. to following standards: Tubes acc. to DIN 865 / 866, ASTM A 269 / A 270, DIN EN 027-7 / 026-5 with a length of 5900-6090 mm (max. 0% short lengths of min. 000 mm possible) Tube components Prematerial acc. to ASTM A 269 / A 270, DIN EN 027-7 / 026-5 Machined components Prematerial acc. to ASTM A 479, DIN EN 0088-, DIN 7440 Tubes are permanently marked over the full length. Fittings are needle marked. Marking always with DOCKWEILER DW-Number Dimension Material Heat number TECHNISCHE LIEFERBEDINGUNGEN Alle Rohre und Formteile sind zum Orbitalschweißen vorbereitet und entsprechen den folgenden Normen: Rohre nach DIN 865 / 866, ASTM A 269 / A 270, DIN EN 027-7 / 026-5 mit einer Länge von 5900-6090 mm (max. 0% Kurzlängen von min. 000 mm möglich) Rohrkomponenten Vormaterial nach ASTM A 269 / A 270, DIN EN 027-7 / 026-5 Drehkomponenten Vormaterial ASTM A 479, DIN EN 0088-, DIN 7440 Rohre sind über die gesamte Länge dauerhaft gekennzeichnet. Formteile mit Nadelgravur. Die Kennzeichnung erfolgt immer mit DOCKWEILER DW-Nummer Abmessung Werkstoff Schmelzennummer 4 www.dockweiler.com 0/205
MATERIALS Depending on outer diameter welded or seamless austenitic stainless steel tubes and fittings are available in the following materials:.445 / UNS S60 (6L) (acc. to Basler Norm 2 (BN2) with ferrite content of the basic material and longitudinal weld 0,5%, for ISO dimensions also circumferential weld 0,5% ferrite content).4404 / UNS S60 (6L).459 / UNS N08904 (904L) UNS S60 (6L) The hardness is equivalent to: max. 80 HV acc. to DIN EN ISO 6507- max. 90 HRB acc. to DIN EN ISO 6508- WERKSTOFFE Abhängig vom Durchmesser sind nahtlose oder geschweißte austenitische Edelstahlrohre und Formteile in den folgenden Werkstoffen:.445 / UNS S60 (6L) (entspricht nach Basler Norm 2 (BN2) einem Ferritgehalt von Grundmaterial und Längsnaht 0,5%, bei ISO-Abmessungen zusätzlich auch Rundschweißnähte 0,5% Ferritgehalt).4404 / UNS S60 (6L).459 / UNS N08904 (904L) UNS S60 (6L) Die Härte entspricht: max. 80 HV nach DIN EN ISO 6507- max. 90 HRB nach DIN EN ISO 6508- SURFACES Tubes and fittings are available with following inner surfaces: Bright finished (bf) H4*: Ra 0,40 µm (6 µin) Anodic clean (ac) H4*: Ra 0,40 µm (6 µin) Electropolished (ep) HE5*: Ra 0,25 µm (0 µin) * Hygienic class acc. to DIN 866 / 865 / 864 The outer surface has a Ra value,00 µm (40 µin) The Ra value in the cold worked are of fittings (inner and outer surface) and on the surface of circumferential welds is not defined. Specified roughness of total surface available on request. For the machining of the inner surfaces following standards apply: Bright finished: Cleaning and test procedure ASTM A 62, S Anodic clean: Procedure acc. to Spec. Doc. 7.4-40/4.. (for tubes) / Doc. 7.4-40/4.2. (for fittings). Free of oil and grease acc. to ASTM G9.4.. - Level A Electropolished: Procedure acc. to Spec. Doc. 7.4-40/4.. (for tubes) / Doc. 7.4-40/4.2. (for fittings). Free of oil and grease acc. to ASTM G9.4.. - Level A OBERFLÄCHEN Rohre und Formteile bieten wir mit folgenden Innenoberflächen an: Metallblank (bf) H4*: Ra 0,40 µm (6 µin) Anodisch gereinigt (ac) H4*: Ra 0,40 µm (6 µin) Elektropoliert (ep) HE5*: Ra 0,25 µm (0 µin) * Hygieneklassen nach DIN 866 / 865 / 864 Die Außenoberfläche hat einen Ra-Wert,00 µm (40 µin) Ra-Wert im Kaltumformbereich und auf der Rundschweißnaht von Formteilen nicht definiert. Mit spezifiziertem Ra-Wert auf Anfrage. Für die Bearbeitung der Innenoberflächen finden folgende Normen Anwendung: Metallblank: Reinigungs- und Prüfverfahren ASTM A 62, S Anodisch gereinigt: gem. Spez. Doc. 7.4-40/4.. (bei Rohren) / Doc. 7.4-40/4.2. (bei Fittingen). Öl- und fettfrei gem. ASTM G9.4.. - Level A Elektropoliert: gem. Spez. Doc. 7.4-40/4.. (bei Rohren) / Doc. 7.4-40/4.2. (bei Fittingen). Öl- und fettfrei gem. ASTM G9.4.. - Level A QUALITY AND TEST PROCEDURES Verification of basic test certificate Visual control Endoscopic inspection of bright finished tubes Verification of dimensions Roughness measurements δ ferrite measurment (.445 BN2 / 6L) QUALITÄTSKONTROLLE UND PRÜFVERFAHREN Vorzeugniskontrolle Visuelle Prüfung Endoskopie der metallblanken Rohre Baumaßkontrolle Rauheitsmessung δ-ferrit-messung (.445 BN2 / 6L) DOKUMENTATION, PACKAGING AND SHIPPING The documentation result by the Dockweiler Inspection Certificate. acc. to DIN EN 0204. Bright finished tubes and fittings are closed with transparent PE caps (anodically cleaned and electropolished tubes and fittings with PE/PA squares), sleeved and sealed in PE and marked with a green sticker safetron. Electropolished parts with yellow caps and with a green sticker safetron ep. Delivery of tubes in tubular container or wooden crate, fittings in strong cardboard box with shock-absorbing filler. DOKUMENTATION, VERPACKUNG UND VERSAND Die Dokumentation erfolgt über das Dockweiler Abnahmeprüfzeugnis. nach DIN EN 0204. Metallblanke und anodisch gereinigte Rohre und Formteile sind mit transparenten PE-Kappen verschlossen (anodisch gereinigte und elektropolierte Teile erhalten zusätzlich PA/PE- Folienunterlagen), und mit grünem Aufkleber safetron versehen. Elektropolierte Rohre und Formteile sind mit gelben Kappen verschlossen und mit grünem Aufkleber safetron ep versehen. Versand von Rohren in Köchern oder Kisten, der von Formteilen stoßgesichert in festem Karton oder Kisten. 0/205 www.dockweiler.com 5
SPECIFICATION SPEZIFIKATION weldtron Liquid APPLICATIONS Weldtron is used in all production processes in the biotechnology and in pharmaceutical industries, as well as in critical areas in the cosmetic and food industry. ANWENDUNGEN Weldtron kann in allen Produktionsprozessen in der Biotechnologie und der Pharmaindustrie, sowie in den kritischen Bereichen in der Kosmetik- und Lebensmittelindustrie eingesetzt werden. COSMETIC INDUSTRIE KOSMETISCHE INDUSTRIE FOOD AND BEVERAGE LEBENSMITTELINDUSTRIE DIMENSIONS All tubes and fittings are available from stock in the following sizes: Imperial (acc. to ASTM A269 / A270 and DIN 866 Series C) / 4 " (0,250 inch x 0,05 inch) to 6" (6,000 inch x 0,09 inch) 6,5 mm x 0,89 mm to 52,40 mm x 2,77 mm ISO (acc. to DIN EN ISO 27 and DIN 866 Series B),50 mm x,60 mm to 29,00 mm x 2,60 mm Metric (acc. to DIN 866 Series A) 6,00 mm x,00 mm to 54,00 mm x 2,00 mm Other dimensions on request. ABMESSUNGEN Alle Rohre und Formteile sind in den folgenden Abmessungen ab Lager bei uns erhältlich: Imperial (nach ASTM A269 / A270 und DIN 866 Reihe C) / 4 " (0,250 inch x 0,05 inch) bis 6" (6,000 inch x 0,09 inch) 6,5 mm x 0,89 mm bis 52,40 mm x 2,77 mm ISO (nach DIN EN ISO 27 und DIN 866 Reihe B),50 mm x,60 mm bis 29,00 mm x 2,60 mm Metrisch (nach DIN 866 Reihe A) 6,00 mm x,00 mm bis 54,00 mm x 2,00 mm Weitere Abmessungen auf Anfrage. TECHNICAL TERMS OF DELIVERY Tubes and fittings are prepared for orbital welding acc. to following standards: Tubess acc. to DIN 865 / 866, ASTM A 269 / A 270, DIN EN 027-7 / 026-5 with a length of 5900-6090 mm (max. 0% short lengths possible) Tube components Prematerial acc. to ASTM A 269 / A 270, DIN EN 027-7 / 026-5 Machined components Prematerial acc. to ASTM A 479, DIN EN 0088-, DIN 7440 Tubes are permanently marked over the full length. Fittings are needle marked. Marking always with DOCKWEILER DW-Number Dimension Material Heat number TECHNISCHE LIEFERBEDINGUNGEN Alle Rohre und Formteile sind zum Orbitalschweißen vorbereitet und entsprechen den folgenden Normen: Rohre nach DIN 865 / 866, ASTM A 269 / A 270, DIN EN 027-7 / 026-5 mit einer Länge von 5900-6090 mm (max. 0% Kurzlängen möglich) Rohrkomponenten Vormaterial nach ASTM A 269 / A 270, DIN EN 027-7 / 026-5 Drehkomponenten Vormaterial nach ASTM A 479, DIN EN 0088-, DIN 7440 Rohre sind über die gesamte Länge dauerhaft gekennzeichnet. Formteile mit Nadelgravur Die Kennzeichnung erfolgt immer mit DOCKWEILER DW-Nummer Abmessung Werkstoff Schmelzennummer 6 www.dockweiler.com 0/205
MATERIALS Depending on outer diameter welded or seamless austenitic stainless steel tubes and fittings are available in the following materials:.445 / UNS S60 (6L) (acc. To Basler Norm 2 (BN2) with ferrite content of the basic material and longitudinal weld 0,5%).4404 / UNS S60 (6L).459 / UNS N08904 (904L) UNS S60 (6L) The hardness is equivalent to: max. 80 HV acc. to DIN EN ISO 6507- max. 90 HRB acc. to DIN EN ISO 6508- WERKSTOFFE Abhängig vom Durchmesser sind nahtlose oder geschweißte austenitische Edelstahlrohre und Formteile in den folgenden Werkstoffen:.445 / UNS S60 (6L) (entspricht nach Basler Norm 2 (BN2) einem Ferritgehalt von Grundmaterial und Längsnaht 0,5%).4404 / UNS S60 (6L).459 / UNS N08904 (904L) UNS S60 (6L) Die Härte entspricht: max. 80 HV nach DIN EN ISO 6507- max. 90 HRB nach DIN EN ISO 6508- SURFACES Tubes and fittings are available with following inner surfaces: Bright finished (bf) H*: Ra 0,80 µm (2 µin) Anodic clean (ac) H*: Ra 0,80 µm (2 µin) Electropolished (ep) HE*: Ra 0,60 µm (24 µin) * Hygienic class acc. to DIN 866 / 865 / 864 The outer surface has a Ra value,00 µm (40 µin) Ra value in the cold worked area of fittings (inner and outer surface), on the surface of circumferential welds as well as on the longitudinal weld seam of electropolished tubes and fittings is not defined. Specified roughness of total surface available on request. For the machining of the inner surfaces following standards apply: Bright finished: Cleaning and test procedure ASTM A 62, S Anodic clean: Procedure acc. to Spec. Doc. 7.4-40/4.. (for tubes) / Doc. 7.4-40/4.2. (for fittings). Free of oil and grease acc. to ASTM G9.4.. - Level A Electropolished: Procedure acc. to Spec. Doc. 7.4-40/4.. (for tubes) / Doc. 7.4-40/4.2. (for fittings). Free of oil and grease acc. to ASTM G9.4.. - Level A OBERFLÄCHEN Rohre und Formteile bieten wir mit folgenden Innenoberflächen an: Metallblank (bf) H*: Ra 0,80 µm (2 µin) Anodisch gereinigt (ac) H*: Ra 0,80 µm (2 µin) Elektropoliert (ep) HE*: Ra 0,60 µm (24 µin) * Hygieneklassen nach DIN 866 / 865 / 864 Die Außenoberfläche hat einen Ra-Wert,00 µm (40 µin) Ra-Wert im Kaltumformbereich, auf der Rundschweißnaht von Formteilen sowie auf der Längsschweißnaht elektropolierter Rohre und Formteile nicht definiert. Mit spezifiziertem Ra-Wert auf Anfrage. Für die Bearbeitung der Innenoberflächen finden folgende Normen Anwendung: Metallblank: Reinigungs- und Prüfverfahren ASTM A 62, S Anodisch gereinigt: gem. Spez. Doc. 7.4-40/4.. (bei Rohren) / Doc. 7.4-40/4.2. (bei Fittingen). Öl- und fettfrei gem. ASTM G9.4.. - Level A Elektropoliert: gem. Spez. Doc. 7.4-40/4.. (bei Rohren) / Doc. 7.4-40/4.2. (bei Fittingen) Öl- und fettfrei gem. ASTM G9.4.. - Level A QUALITY AND TEST PROCEDURES Verification of basic test certificate Visual control Endoscopic inspection of bright finished tubes Verification of dimensions Roughness measurements δ ferrite measurment (.445 BN2 / 6L) QUALITÄTSKONTROLLE UND PRÜFVERFAHREN Vorzeugniskontrolle Visuelle Prüfung Endoskopie der metallblanken Rohre Baumaßkontrolle Rauheitsmessung δ-ferrit-messung (.445 BN2 / 6L) DOKUMENTATION, PACKAGING AND SHIPPING The documentation result by the Dockweiler Inspection Certificate. acc. to DIN EN 0204. DOKUMENTATION, VERPACKUNG UND VERSAND Die Dokumentation erfolgt über das Dockweiler Abnahmeprüfzeugnis. nach DIN EN 0204. Bright finished tubes and fittings are closed with transparent PE caps (anodically cleaned and electropolished tubes and fittings with PE/PA squares), sleeved and sealed in PE and marked with a green sticker weldtron. Electropolished parts with yellow caps and with a green sticker weldtron ep. Delivery of tubes in tubular container or wooden crate, fittings in strong cardboard box with shock-absorbing filler. Metallblanke und anodisch gereinigte Rohre und Formteile sind mit transparenten PE-Kappen verschlossen (anodisch gereinigte und elektropolierte Teile erhalten zusätzlich PA/PE- Folienunterlagen), und mit grünem Aufkleber weldtron versehen. Elektropolierte Rohre und Formteile sind mit gelben Kappen verschlossen und mit grünem Aufkleber weldtron ep versehen. Versand von Rohren in Köchern oder Kisten, der von Formteilen stoßgesichert in festem Karton oder Kisten. 7 0/205 www.dockweiler.com
SPECIFICATION SPEZIFIKATION bpe-direct Liquid APPLICATIONS bpe-direct is the tubes and fitting programm acc. to ASME BPE of Dockweiler for the transportation of liquid media in the biotechnology, cosmetic and pharmaceutical industry. ANWENDUNGEN bpe-direct sind Rohre und Formteile von Dockweiler nach der ASME BPE Spezifikation für den Transport flüssiger Medien in der Biotechnologie, der Kosmetik und in der pharmazeutischen Industrie. BIOTECHNOLOGICAL INDUSTRY BIOTECHNOLOGIE PHARMACEUTICAL INDUSTRY PHARMAZEUTISCHE INDUSTRIE DIMENSIONS All tubes and fittings are available from stock in the following sizes: Imperial (acc. to ASME BPE, Part DT) / 4 " (0,250 inch x 0,05 inch) to 6" (6,000 inch x 0,09 inch) 6,5 mm x 0,89 mm to 52,40 mm x 2,77 mm ABMESSUNGEN Alle Rohre und Formteile sind in den folgenden Abmessungen ab Lager bei uns erhältlich: Imperial (nach ASME BPE, Part DT) / 4 (0,250 inch x 0,05 inch) bis 6 (6,000 inch x 0,09 inch) 6,5 mm x 0,89 mm bis 52,40 mm x 2,77 mm TECHNICAL TERMS OF DELIVERY Tubes and fittings are prepared for orbital welding acc. to following standards: Tubes and fittings acc. to ASME BPE, ASTM A 269/270, tubes with a length of 5900-6090 mm (max. 0% short lengths of min. 000 mm possible) Tubes are permanently marked over the full length. Fittings are needle marked. Marking always with: ASME BPE SF or SF4 DOCKWEILER DW-Number Dimension Material Heat number TECHNISCHE LIEFERBEDINGUNGEN Alle Rohre und Formteile sind zum Orbitalschweißen vorbereitet und entsprechen den folgenden Normen: Rohre und Formteile nach ASME BPE, ASTM A 269/270, Rohre mit einer Länge von 5900-6090 mm (max. 0% Kurzlängen von min. 000 mm möglich) Rohre sind über die gesamte Länge dauerhaft gekennzeichnet. Formteile mit Nadelgravur Die Kennzeichnung erfolgt immer mit: ASME BPE SF oder SF4 DOCKWEILER DW-Nummer Abmessung Werkstoff Schmelzennummer 8 www.dockweiler.com 0/205
MATERIALS Depending on outer diameter welded or seamless austenitic stainless steel tubes and fittings are available in the following materials: UNS S60 (6L) in acc. to ASME BPE: Chemical Composition in %: C max. = 0,00 Cr = 6,00-8,00 Mn max. = 2,00 Mo = 2,00 -,00 Ni = 0,00-4,00 P max. = 0,045 Si max. =,00 S = 0,005-0,07 The hardness is equivalent to: max. 80 HV max. 90 HRB WERKSTOFFE Abhängig vom Durchmesser sind nahtlose oder geschweißte austenitische Edelstahlrohre und Formteile in den folgenden Werkstoffen: UNS S60 (6L) nach ASME BPE: Chemische Analyse in %: C max. = 0,00 Cr = 6,00-8,00 Mn max. = 2,00 Mo = 2,00 -,00 Ni = 0,00-4,00 P max. = 0,045 Si max. =,00 S = 0,005-0,07 Die Härte entspricht: max. 80 HV max. 90 HRB SURFACES Tubes and fittings are available with following inner surfaces acc. to ASME BPE SF: OBERFLÄCHEN Rohre und Formteile bieten wir mit folgenden Innenoberflächen an nach ASME BPE SF: Bright finished (bf) SF: Electropolished (ep) SF4: Ra 0,5 µm (20 µin) Ra 0,8 µm (5 µin) Metallblank (bf) SF: Elektropoliert (ep) SF4: Ra 0,5 µm (20 µin) Ra 0,8 µm (5 µin) The outer surface has a Ra value,00 µm (40 µin) For the machining of the inner surfaces following standards apply: Bright finished: Cleaning and test procedure ASTM A 62, S Electropolished: Procedure acc. to Spec. Doc. 7.4-40/4.. (for tubes) / Doc. 7.4-40/4.2. (for fittings). Free of oil and grease acc. to ASTM G9.4.. - Level A Die Außenoberfläche hat einen Ra-Wert,00 µm (40 µin) Für die Bearbeitung der Innenoberflächen finden folgende Normen Anwendung: Metallblank: Reinigungs- und Prüfverfahren ASTM A 62, S Elektropoliert: gem. Spez. Doc. 7.4-40/4.. (bei Rohren) / Doc. 7.4-40/4.2. (bei Fittingen). Öl- und fettfrei gem. ASTM G9.4.. - Level A QUALITY AND TEST PROCEDURES Verification of basic test certificate Visual control Endoscopic inspection of bright finished tubes Verification of dimensions Roughness measurements QUALITÄTSKONTROLLE UND PRÜFVERFAHREN Vorzeugniskontrolle Visuelle Prüfung Endoskopie der metallblanken Rohre Baumaßkontrolle Rauheitsmessung DOKUMENTATION, PACKAGING AND SHIPPING The documentation result by the Dockweiler Inspection Certificate. acc. to DIN EN 0204. Ends are closed with transparent PE caps (electropolished parts with PE/PA squares). Tubes and fittings are individually sealed in PE foil, marked with a white sticker ASME BPE SF, electropolished parts with yellow caps and yellow sticker ASME BPE SF4. Delivery of tubes in tubular container or wooden crate, of fittings in strong cardboard box or wooden crate with shock absorbing filler. DOKUMENTATION, VERPACKUNG UND VERSAND Die Dokumentation erfolgt über das Dockweiler Abnahmeprüfzeugnis. nach DIN EN 0204. Metallblanke Rohre und Formteile sind mit transparenten PE-Kappen verschlossen (elektropolierte Teile erhalten zusätzlich PA/PE- Folienunterlagen) und mit weißem Aufkleber ASME BPE SF versehen. Elektropolierte Rohre und Formteile sind mit gelben Kappen verschlossen und mit gelbem Aufkleber ASME BPE SF4 versehen. Versand von Rohren in Köchern oder Kisten, der von Formteilen stoßgesichert in festem Karton oder Kisten. 0/205 www.dockweiler.com 9
SPECIFICATION SPEZIFIKATION ultron Gas APPLICATIONS Ultron offers optimum safety for the transport of UHP gases in the semiconductor industry and fine chemistry ANWENDUNGEN Ultron wurde speziell für den Transport von UHP Gasen in der Halbleiterindustrie und der Feinchemie entwickelt. SEMICONDUCTOR HALBLEITERINDUSTRIE FINE CHEMISTRY FEINCHEMIE DIMENSIONS All tubes and fittings are available from stock in the following sizes: Imperial (acc. to ASTM A269 / A62 and DIN 866 Series C) / 8 " (0,25 inch x 0,022 inch) to 6" (6,000 inch x 0,09 inch),8 mm x 0,56 mm* to 52,40 mm x 2,77 mm Pipe (acc. to ASTM A2) 29,08 mm x,76 mm to 2,85 mm x 4,75 mm NPS 8, 0, 2, Schedule 0S Metric (acc. to DIN 866 Series A),00 mm x 0,50 mm* to 5,00 mm x,50 mm On request ISO (acc. to DIN EN ISO 27 and DIN 866 Series B),50 mm x,60 mm to 29,0 mm x 2,60 mm * For dimensions OD < 5,00 mm roughness is not defined. Tube Length will be 2950 ± 50 mm. ABMESSUNGEN Alle Rohre und Formteile sind in den folgenden Abmessungen ab Lager bei uns erhältlich: Imperial (nach ASTM A269 / A62 und DIN 866 Reihe C) / 8 " (0,25 inch x 0,022 inch) bis 6" (6,000 inch x 0,09 inch),8 mm x 0,56 mm* bis 52,40 mm x 2,77 mm Pipe (nach ASTM A2/ A999) 29,08 mm x,76 mm bis 2,85 mm x 4,75 mm NPS 8, 0, 2, Schedule 0S Metrisch (nach DIN 866 Reihe A),00 mm x 0,50 mm* bis 5,00 mm x,50 mm Auf Anfrage ISO (nach DIN EN ISO 27 und DIN 866 Reihe B),50 mm x,60 mm bis 29,0 mm x 2,60 mm * Für Abmessungen mit Außendurchmesser < 5,00 mm ist der Ra-Wert nicht definiert. Die Rohrlänge beträgt 2950 ± 50 mm. TECHNICAL TERMS OF DELIVERY Tubes and fittings are prepared for orbital welding acc. to following standards: Tubes acc. to ASTM A 269 / A 62 / A 2 (Pipe), DIN EN 027-7 / 026-5 with a length of 5950 ± 50 mm (max. 0% short lengths of min. 000 mm possible) Tube components Prematerial acc. to ASTM A 269 / A 62 / A 2 / A 40 (Pipe), DIN EN 027-7 / 026-5 Machined components Prematerial acc. to ASTM A 479, DIN EN 0088-, DIN 7440, ASTM A 82 (Pipe) Tubes are permanently marked over the full length. Fittings are needle marked. Marking always with DOCKWEILER / DW-Number / Dimension / Material / Heat number TECHNISCHE LIEFERBEDINGUNGEN Alle Rohre und Formteile sind zum Orbitalschweißen vorbereitet und entsprechen den folgenden Normen: Rohre nach ASTM A 269 / A 62 / A 2 (Pipe), DIN EN 027-7 / 026-5 mit einer Länge von 5950 ± 50 mm (max. 0% Kurzlängen von min. 000 mm möglich) Rohrkomponenten Vormaterial nach ASTM A 269 / A 62 / A 2 / A 40 (Pipe), DIN EN 027-7 / 026-5 Drehkomponenten Vormaterial nach ASTM A 479, DIN EN 0088-, DIN 7440, ASTM A 82 (Pipe) Rohre sind über die gesamte Länge dauerhaft gekennzeichnet. Formteile mit Nadelgravur Die Kennzeichnung erfolgt immer mit DOCKWEILER / DW-Nummer / Abmessung / Werkstoff / Schmelzennummer 0 www.dockweiler.com 0/205
MATERIALS Depending on outer diameter welded or seamless austenitic stainless steel tubes and fittings are available in the following materials:.4404 / UNS S60 (6L).445 / UNS S60 (6L) (acc. to Basler Norm 2 (BN2)) UNS S60 (6L) The hardness is equivalent to: max. 80 HV acc. to DIN EN ISO 6507- max. 90 HRB acc. to DIN EN ISO 6508- WERKSTOFFE Abhängig vom Durchmesser sind nahtlose oder geschweißte austenitische Edelstahlrohre und Formteile in den folgenden Werkstoffen:.4404 / UNS S60 (6L).445 / UNS S60 (6L) (entspricht Basler Norm 2 (BN2)) UNS S60 (6L) Die Härte entspricht: max. 80 HV nach DIN EN ISO 6507- max. 90 HRB nach DIN EN ISO 6508- SURFACES Tubes and fittings are available with following inner surfaces: OBERFLÄCHEN Rohre und Formteile bieten wir mit folgenden Innenoberflächen an: Standard: On request: Pipes: Ra 0,25 µm (0 µin) Ra 0, µm (5 µin) Ra 0,8 µm (7 µin) Ra 0,8 µm (5 µin) Ra 0,5 µm (20 µin) Standard: Auf Anfrage Pipes: Ra 0,25 µm (0 µin) Ra 0, µm (5 µin) Ra 0,8 µm (7 µin) Ra 0,8 µm (5 µin) Ra 0,5 µm (20 µin) The outer surface has a Ra value,00 µm (40 µin) The Ra value in the cold worked are of fittings (inner and outer surface) and on the surface of circumferential welds is not defined. Specified roughness of total surface available on request. For the machining of the inner surfaces following standards apply: Free of oil and grease acc. to ASTM G9.4.. - Level A Tubes Electropolishing procedure acc. to Spec. Doc. 7.4-40/4..4 Fittings Electropolishing procedure acc. to Spec. Doc. 7.4-40/4.2.4 Cleanroom cleaning and packing (Federal Class 4 / ISO Class 6) Die Außenoberfläche hat einen Ra-Wert,00 µm (40 µin) Ra-Wert im Kaltumformbereich und auf der Rundschweißnaht von Formteilen nicht definiert. Mit spezifiziertem Ra-Wert auf Anfrage. Für die Bearbeitung der Innenoberflächen finden folgende Normen Anwendung: Öl- und fettfrei gem. ASTM G9.4.. - Level A Rohre Elektropolierverfahren gem. Spez. Doc. 7.4-40/4..4 Formteile Elektropolierverfahren gem. Spez. Doc. 7.4-40/4.2.4 Reinigung und Verpackung im Reinraum (ISO Klasse 4 / Federal Class 0) QUALITY AND TEST PROCEDURES Verification of basic test certificate Visual control Endoscopic inspection of bright finished tubes Verification of dimensions Roughness measurements Conductivity test (DI water) TOC-measurement of DI water Particle measurements REM XPS / ESCA Auger analysis (AES) QUALITÄTSKONTROLLE UND PRÜFVERFAHREN Vorzeugniskontrolle Visuelle Prüfung Endoskopie der metallblanken Rohre Baumaßkontrolle Rauheitsmessung Leitfähigkeitsmessung (deionisiertes Wasser) TOC-Messung (deionisiertes Wasser) Partikelmessung REM XPS / ESCA Auger-Analyse (AES) DOKUMENTATION, PACKAGING AND SHIPPING The documentation result by the Dockweiler Inspection Certificate. acc. to DIN EN 0204. Tubes and fittings filled with N2 (99.9998% incl. inert gas), closed with PA/ PE squares and yellow PE caps, sleeved and sealed in PE with yellow sticker ultron imperial dimensions double sleeved and sealed in PE. Delivery in tubular container or wooden crate, fittings in strong cardboard box with shock absorbing filler. DOKUMENTATION, VERPACKUNG UND VERSAND Die Dokumentation erfolgt über das Dockweiler Abnahmeprüfzeugnis. nach DIN EN 0204. Rohre und Formteile mit N2 (99.9998% inkl. Edelgase) gefüllt, mit PA/PE Folienunterlagen und gelben PE-Kappen verschlossen, einzeln in Folie eingeschweißt (Imperial Abmessungen in 2 Folien), mit gelbem Aufkleber ultron. Versand von Rohren in Köchern oder Kisten, der von Formteilen stoßgesichert in festem Karton oder Kisten. 0/205 www.dockweiler.com
SPECIFICATION SPEZIFIKATION finetron Gas APPLICATIONS Finetron is with the quality surface mainly used for the transport of high purity gases for the semiconductor industry as well as in photovoltaics. ANWENDUNGEN Finetron ist mit seiner hochwertigen Oberfläche schwerpunktmäßig für den Transport von Reinstgasen in der Halbleiterindustie und der Photovoltaik geeignet. PHOTOVOLTAIC PHOTOVOLTAIK SEMICONDUCTOR HALBLEITERINDUSTRIE DIMENSIONS All tubes and fittings are available from stock in the following sizes: Imperial (acc. to ASTM A269 / A62 and DIN 866 Series C) / 4 " (0,250 inch x 0,05 inch) to 6" (6,000 inch x 0,09 inch) 6,5 mm x 0,89 mm to 52,40 mm x 2,77 mm Metric (acc. to DIN 866 Series A) 6,00 mm x,00 mm to 5,00 mm x,50 mm On request ISO (acc. to DIN EN ISO 27 and DIN 866 Series B),50 mm x,60 mm to 29,0 mm x 2,60 mm ABMESSUNGEN Alle Rohre und Formteile sind in den folgenden Abmessungen ab Lager bei uns erhältlich: Imperial (nach ASTM A269 / A62 und DIN 866 Reihe C) / 4 " (0,250 inch x 0,05 inch) bis 6" (6,000 inch x 0,09 inch) 6,5 mm x 0,89 mm bis 52,40 mm x 2,77 mm Metrisch (nach DIN 866 Reihe A) 6,00 mm x,00 mm bis 5,00 mm x,50 mm Auf Anfrage ISO (nach DIN EN ISO 27 und DIN 866 Reihe B),50 mm x,60 mm bis 29,0 mm x 2,60 mm TECHNICAL TERMS OF DELIVERY Tubes and fittings are prepared for orbital welding acc. to following standards: Tubes acc. to acc. to ASTM A 269 / A 62 / A 2 (Pipe), DIN EN 027-7 / 026-5 with a length of 5900-6090 mm (max. 0% short lengths of min. 000 mm possible) Tube components Prematerial acc. to ASTM A 269 / A 62 / A 2 / A 40 (Pipe), DIN EN 027-7 / 026-5 Machined components Prematerial acc. to ASTM A 479, DIN EN 0088-, DIN 7440, ASTM A 82 (Pipe) Tubes are permanently marked over the full length. Fittings are needle marked. Marking always with DOCKWEILER / DW-Number / Dimension / Material / Heat number TECHNISCHE LIEFERBEDINGUNGEN Alle Rohre und Formteile sind zum Orbitalschweißen vorbereitet und entsprechen den folgenden Normen: Rohre nach ASTM A 269 / A 62 / A 2 (Pipe), DIN EN 027-7 / 026-5 mit einer Länge von 5900-6090 mm (max. 0% Kurzlängen von min. 000 mm möglich) Rohrkomponenten Vormaterial nach ASTM A 269 / A 62 / A 2 / A 40 (Pipe), DIN EN 027-7 / 026-5 Drehkomponenten Vormaterial nach ASTM A 479, DIN EN 0088-, DIN 7440, ASTM A 82 (Pipe) Rohre sind über die gesamte Länge dauerhaft gekennzeichnet. Formteile mit Nadelgravur Die Kennzeichnung erfolgt immer mit DOCKWEILER / DW-Nummer / Abmessung / Werkstoff / Schmelzennummer 2 www.dockweiler.com 0/205
MATERIALS Depending on outer diameter welded or seamless austenitic stainless steel tubes and fittings are available in the following materials:.4404 / UNS S60 (6L).445 / UNS S60 (6L) (acc. to Basler Norm 2 (BN2)) UNS S60 (6L) The hardness is equivalent to: max. 80 HV acc. to DIN EN ISO 6507- max. 90 HRB acc. to DIN EN ISO 6508- WERKSTOFFE Abhängig vom Durchmesser sind nahtlose oder geschweißte austenitische Edelstahlrohre und Formteile in den folgenden Werkstoffen:.4404 / UNS S60 (6L).445 / UNS S60 (6L) (entspricht Basler Norm 2 (BN2)) UNS S60 (6L) Die Härte entspricht: max. 80 HV nach DIN EN ISO 6507- max. 90 HRB nach DIN EN ISO 6508- SURFACES Tubes and fittings are available with the following inner surface: Ra 0,40 µm (6 µin) The outer surface has a Ra value,00 µm (40 µin) Ra value in the cold worked area and on the surface of circumferential welds is not defined. Specified roughness is available on request. For the machining of the inner surfaces following standards apply: Tubes and fittings Cleaning and test procedure ASTM A 62, S OBERFLÄCHEN Rohre und Formteile sind in den folgenden Oberflächenoptionen verfügbar: Ra 0,40 µm (6 µin) Die Außenoberfläche hat einen Ra-Wert,00 µm (40 µin) Ra-Wert im Kaltumformbereich und auf der Rundschweißnaht von Formteilen ist nicht definiert. Mit spezifiziertem Ra-Wert auf Anfrage. Für die Bearbeitung der Innenoberflächen finden folgende Normen Anwendung: Rohre und Formteile Reinigungs- und Prüfverfahren ASTM A 62, S QUALITY AND TEST PROCEDURES Verification of basic test certificate Visual control Endoscopic inspection of bright finished tubes Verification of dimensions Roughness measurements QUALITÄTSKONTROLLE UND PRÜFVERFAHREN Vorzeugniskontrolle Visuelle Prüfung Endoskopie der metallblanken Rohre Baumaßkontrolle Rauheitsmessung DOKUMENTATION, PACKAGING AND SHIPPING The documentation result by the Dockweiler Inspection Certificate. acc. to DIN EN 0204. Bright finished and anodic cleaned tubes and fittings closed with transparent PE caps (anodic clean tubes and fittings with PE/PA squares), sleeved and sealed in PE and marked with blue sticker finetron. Delivery of tubes in tubular container or wooden crate, fittings in strong cardboard box with shockabsorbing filler. DOKUMENTATION, VERPACKUNG UND VERSAND Die Dokumentation erfolgt über das Dockweiler Abnahmeprüfzeugnis. nach DIN EN 0204. Rohre und Formteile mit transparenten PE-Kappen verschlossen (anodisch gereinigte Rohre und Formteile werden zusätzlich mit PA/PE Folienunterlagen versehen) einzeln in Folie eingeschweißt, mit blauem Aufkleber finetron. Versand von Rohren in Köchern oder Kisten, der von Formteilen stoßgesichert in festem Karton oder Kisten. 0/205 www.dockweiler.com
SPECIFICATION SPEZIFIKATION finetron. Gas APPLICATIONS Finetron. is with the quality surface mainly used for the transport of high purity gases for the semiconductor industry as well as in LED, LCD and TFT industry. ANWENDUNGEN Finetron. ist mit seiner hochwertigen Oberfläche schwerpunktmäßig für den Transport von Reinstgasen in der Halbleiterindustie sowie in der LED-, LCDund TFT-Industrie. SEMICONDUCTOR HALBLEITERINDUSTRIE LED-INDUSTRY LED-INDUSTRIE DIMENSIONS All tubes and fittings are available from stock in the following sizes: Imperial (acc. to ASTM A269 / A62 and DIN 866 Series C) / 4 " (0,250 inch x 0,05 inch) to 6" (6,000 inch x 0,09 inch) 6,5 mm x 0,89 mm to 52,40 mm x 2,77 mm Metric (acc. to DIN 866 Series A) 6,00 mm x,00 mm to 5,00 mm x,50 mm On request ISO (acc. to DIN EN ISO 27 and DIN 866 Series B),50 mm x,60 mm to 29,0 mm x 2,60 mm Pipe (acc. to ASTM A2) ABMESSUNGEN Alle Rohre und Formteile sind in den folgenden Abmessungen ab Lager bei uns erhältlich: Imperial (nach ASTM A269 / A62 und DIN 866 Reihe C) / 4 " (0,250 inch x 0,05 inch) bis 6" (6,000 inch x 0,09 inch) 6,5 mm x 0,89 mm bis 52,40 mm x 2,77 mm Metrisch (nach DIN 866 Reihe A) 6,00 mm x,00 mm bis 5,00 mm x,50 mm Auf Anfrage ISO (nach DIN EN ISO 27 und DIN 866 Reihe B),50 mm x,60 mm bis 29,0 mm x 2,60 mm Pipe (nach ASTM A2) TECHNICAL TERMS OF DELIVERY Tubes and fittings are prepared for orbital welding acc. to following standards: Tubes acc. to acc. to ASTM A 269 / A 62 / A 2 (Pipe), DIN EN 027-7 / 026-5 with a length of 5900-6090 mm (max. 0% short lengths of min. 000 mm possible) Tube components Prematerial acc. to ASTM A 269 / A 62 / A 2 / A 40 (Pipe), DIN EN 027-7 / 026-5 Machined components Prematerial acc. to ASTM A 479, DIN EN 0088-, DIN 7440, ASTM A 82 (Pipe) Tubes are permanently marked over the full length. Fittings are needle marked. Marking always with DOCKWEILER / DW-Number / Dimension / Material / Heat number TECHNISCHE LIEFERBEDINGUNGEN Alle Rohre und Formteile sind zum Orbitalschweißen vorbereitet und entsprechen den folgenden Normen: Rohre nach ASTM A 269 / A 62 / A 2 (Pipe), DIN EN 027-7 / 026-5 mit einer Länge von 5900-6090 mm (max. 0% Kurzlängen von min. 000 mm möglich) Rohrkomponenten Vormaterial nach ASTM A 269 / A 62 / A 2 / A 40 (Pipe), DIN EN 027-7 / 026-5 Drehkomponenten Vormaterial nach ASTM A 479, DIN EN 0088-, DIN 7440, ASTM A 82 (Pipe) Rohre sind über die gesamte Länge dauerhaft gekennzeichnet. Formteile mit Nadelgravur Die Kennzeichnung erfolgt immer mit DOCKWEILER / DW-Nummer / Abmessung / Werkstoff / Schmelzennummer 4 www.dockweiler.com 0/205
MATERIALS Depending on outer diameter welded or seamless austenitic stainless steel tubes and fittings are available in the following materials:.4404 / UNS S60 (6L).445 / UNS S60 (6L) (acc. to Basler Norm 2 (BN2)) UNS S60 (6L) The hardness is equivalent to: max. 80 HV acc. to DIN EN ISO 6507- max. 90 HRB acc. to DIN EN ISO 6508- WERKSTOFFE Abhängig vom Durchmesser sind nahtlose oder geschweißte austenitische Edelstahlrohre und Formteile in den folgenden Werkstoffen:.4404 / UNS S60 (6L).445 / UNS S60 (6L) (entspricht Basler Norm 2 (BN2)) UNS S60 (6L) Die Härte entspricht: max. 80 HV nach DIN EN ISO 6507- max. 90 HRB nach DIN EN ISO 6508- SURFACES Tubes and fittings are available with the following inner surface: Ra 0,40 µm (6 µin) The outer surface has a Ra value,00 µm (40 µin) Ra value in the cold worked area and on the surface of circumferential welds is not defined. Specified roughness is available on request. For the machining of the inner surfaces following standards apply: Free of oil and grease acc. to ASTM G9.4.. - Level A Tubes Anodic cleaning procedure acc. to Spec. Doc. 7.4-40/4.. Fittings Anodic cleaning procedure acc. to Spec. Doc. 7.4-40/4.2. OBERFLÄCHEN Ra-Werte für die Innenoberfläche sind vom Außendurchmesser abhängig: Ra 0,40 µm (6 µin) Die Außenoberfläche hat einen Ra-Wert,00 µm (40 µin) Ra-Wert im Kaltumformbereich und auf der Rundschweißnaht von Formteilen ist nicht definiert. Mit spezifiziertem Ra-Wert auf Anfrage. Für die Bearbeitung der Innenoberflächen finden folgende Normen Anwendung: Öl- und fettfrei gem. ASTM G9.4.. - Level A Rohre Anodisches Reinigungsverfahren gem. Spez. Doc. 7.4-40/4.. Formteile Anodisches Reinigungsverfahren gem. Spez. Doc. 7.4-40/4.2. QUALITY AND TEST PROCEDURES Verification of basic test certificate Visual control Endoscopic inspection of bright finished tubes Verification of dimensions Roughness measurements QUALITÄTSKONTROLLE UND PRÜFVERFAHREN Vorzeugniskontrolle Visuelle Prüfung Endoskopie der metallblanken Rohre Baumaßkontrolle Rauheitsmessung DOKUMENTATION, PACKAGING AND SHIPPING The documentation result by the Dockweiler Inspection Certificate. acc. to DIN EN 0204. Bright finished and anodic cleaned tubes and fittings closed with transparent PE caps (anodic clean tubes and fittings with PE/PA squares), sleeved and sealed in PE and marked with blue sticker finetron.. Delivery of tubes in tubular container or wooden crate, fittings in strong cardboard box with shockabsorbing filler. DOKUMENTATION, VERPACKUNG UND VERSAND Die Dokumentation erfolgt über das Dockweiler Abnahmeprüfzeugnis. nach DIN EN 0204. Rohre und Formteile mit transparenten PE-Kappen verschlossen (anodisch gereinigte Rohre und Formteile werden zusätzlich mit PA/PE Folienunterlagen versehen) einzeln in Folie eingeschweißt, mit blauem Aufkleber finetron.. Versand von Rohren in Köchern oder Kisten, der von Formteilen stoßgesichert in festem Karton oder Kisten. 0/205 www.dockweiler.com 5
SPECIFICATION SPEZIFIKATION TCC Gas APPLICATIONS TCC with that cleaned surface is widely used in production, process measurement and photovoltaic. ANWENDUNGEN TCC findet mit seiner Oberfläche breite Verwendung in der Produktion, Photovoltaik sowie Mess- und Regelungstechnik. PHOTOVOLTAIC PHOTOVOLTAIK PROCESS MEASUREMENT AND CONTROL MESS- UND REGELUNGSTECHNIK DIMENSIONS All tubes and fittings are available from stock in the following sizes: Imperial (acc. to ASTM A269 / A270 and DIN 866 Series C) / 8 " (0,25 inch x 0,022 inch) to 6" (6,000 inch x 0,09 inch),8 mm x 0,56 mm to 52,40 mm x 2,77 mm Pipe (acc. to ASTM A2/ A999) 29,08 mm x,76 mm to 508,00 mm x 5,54 mm NPS 8, 0, 2, 6, 20 Schedule 0S Metric (acc. to DIN 866 Series A),00 mm x 0,50 mm to 5,00 mm x,50 mm On request ISO (acc. to DIN EN ISO 27 and DIN 866 Series B),50 mm x,60 mm to 29,0 mm x 2,60 mm ABMESSUNGEN Alle Rohre und Formteile sind in den folgenden Abmessungen ab Lager bei uns erhältlich: Imperial (nach ASTM A269 / A270 und DIN 866 Reihe C) / 8 " (0,25 inch x 0,022 inch) bis 6" (6,000 inch x 0,09 inch),8 mm x 0,56 mm bis 52,40 mm x 2,77 mm Pipe (nach ASTM A2/ A999) 29,08 mm x,76 mm bis 508,00 mm x 5,54 mm NPS 8, 0, 2, 6, 20 Schedule 0S Metrisch (nach DIN 866 Reihe A),00 mm x 0,50 mm bis 5,00 mm x,50 mm Auf Anfrage ISO (nach DIN EN ISO 27 und DIN 866 Reihe B),50 mm x,60 mm bis 29,0 mm x 2,60 mm TECHNICAL TERMS OF DELIVERY Tubes and fittings are prepared for orbital welding acc. to following standards: Tubes acc. to ASTM A 269 / A 62 / A 2 (Pipe), DIN EN 027-7 / 026-5 with a length of 5900-6090 mm (max. 0% short lengths of min. 000 mm possible) Tube components Prematerial acc. to ASTM A 269 / A 62 / A2 / A40 (Pipe), DIN EN 027-7 / 026-5 Machined components Prematerial acc. to ASTM A 479, DIN EN 0088-, DIN 7440, ASTM A82 (Pipe) Tubes and fittings are permanently marked. Marking always with DOCKWEILER / DW-Number / Dimension / Material / Heat number TECHNISCHE LIEFERBEDINGUNGEN Alle Rohre und Formteile sind zum Orbitalschweißen vorbereitet und entsprechen den folgenden Normen: Rohre nach ASTM A 269 / A 62 / A 2 (Pipe), DIN EN 027-7 / 026-5 mit einer Länge von 5900-6090 mm (max. 0% Kurzlängen von min. 000 mm möglich) Rohrkomponenten Vormaterial nach ASTM A 269 / A 62 / A2 / A40 (Pipe), DIN EN 027-7 / 026-5 Drehkomponenten Vormaterial nach ASTM A 479, DIN EN 0088-, DIN 7440, ASTM A82 (Pipe) Rohre und Formteile sind dauerhaft gekennzeichnet. Die Kennzeichnung erfolgt immer mit DOCKWEILER / DW-Nummer / Abmessung / Werkstoff / Schmelzennummer 6 www.dockweiler.com 0/205
MATERIALS Depending on outer diameter welded or seamless austenitic stainless steel tubes and fittings are available in the following materials:.4404 / UNS S60 (6L).445 / UNS S60 (6L) (acc. to Basler Norm 2 (BN2)) UNS S60 (6L) The hardness is equivalent to: max. 80 HV acc. to DIN EN ISO 6507- max. 90 HRB acc. to DIN EN ISO 6508- WERKSTOFFE Abhängig vom Durchmesser sind nahtlose oder geschweißte austenitische Edelstahlrohre und Formteile in den folgenden Werkstoffen:.4404 / UNS S60 (6L).445 / UNS S60 (6L) (entspricht Basler Norm 2 (BN2)) UNS S60 (6L) Die Härte entspricht: max. 80 HV nach DIN EN ISO 6507- max. 90 HRB nach DIN EN ISO 6508- SURFACES Ra values are not defined for the inner surface. On request with Ra value 0,80 µm (2 µin). The outer surface has a Ra value,00 µm (40 µin) Ra value in the cold worked area and on the surface of circumferential welds is not defined. Specified roughness is available on request. For the machining of the inner surfaces following standards apply: Tubes and fittings Cleaning and test procedure ASTM A 62, S OBERFLÄCHEN Ra-Werte sind für die Innenoberfläche nicht definiert. Auf Anfrage mit Ra 0,80 µm (2 µin). Die Außenoberfläche hat einen Ra-Wert,00 µm (40 µin) Ra-Wert im Kaltumformbereich und auf der Rundschweißnaht von Formteilen ist nicht definiert. Mit spezifiziertem Ra-Wert auf Anfrage. Für die Bearbeitung der Innenoberflächen finden folgende Normen Anwendung: Rohre und Formteile Reinigungs- und Prüfverfahren ASTM A 62, S QUALITY AND TEST PROCEDURES Verification of basic test certificate Visual control Endoscopic inspection of bright finished tubes Verification of dimensions Roughness measurements QUALITÄTSKONTROLLE UND PRÜFVERFAHREN Vorzeugniskontrolle Visuelle Prüfung Endoskopie der metallblanken Rohre Baumaßkontrolle Rauheitsmessung DOKUMENTATION, PACKAGING AND SHIPPING The documentation result by the Dockweiler Inspection Certificate. acc. to DIN EN 0204. Bright finished and anodic cleaned tubes and closed with transparent PE caps (anodic clean tubes and fittings with PE/PA squares), sleeved and sealed in PE and marked with green sticker TCC. Delivery of tubes in tubular container or wooden crate, fittings in strong cardboard box with shock-absorbing filler. DOKUMENTATION, VERPACKUNG UND VERSAND Die Dokumentation erfolgt über das Dockweiler Abnahmeprüfzeugnis. nach DIN EN 0204. Rohre und Formteile mit transparenten PE-Kappen verschlossen (anodisch gereinigte Rohre und Formteile werden zusätzlich mit PA/PE-Folienunterlagen versehen) in Folie eingeschweißt, mit grünem Aufkleber TCC. Versand von Rohren in Köchern oder Kisten, der von Formteilen stoßgesichert in festem Karton oder Kisten. 0/205 www.dockweiler.com 7
SPECIFICATION SPEZIFIKATION TCC. Gas APPLICATIONS TCC. with that cleaned surface is widely used in production, analysis and semiconductor industry. ANWENDUNGEN TCC. findet mit seiner Oberfläche breite Verwendung in der Produktion, Analytik und Halbleiterindustrie. ANALYSIS ANALYTIK SEMICONDUCTOR HALBLEITERINDUSTRIE DIMENSIONS All tubes and fittings are available from stock in the following sizes: Imperial (acc. to ASTM A269 / A270 and DIN 866 Series C) / 8 " (0,25 inch x 0,022 inch) to 6" (6,000 inch x 0,09 inch),8 mm x 0,56 mm to 52,40 mm x 2,77 mm Pipe (acc. to ASTM A2/ A999) 29,08 mm x,76 mm to 508,00 mm x 5,54 mm NPS 8, 0, 2, 6, 20 Schedule 0S Metric (acc. to DIN 866 Series A),00 mm x 0,50 mm to 5,00 mm x,50 mm On request ISO (acc. to DIN EN ISO 27 and DIN 866 Series B),50 mm x,60 mm to 29,0 mm x 2,60 mm ABMESSUNGEN Alle Rohre und Formteile sind in den folgenden Abmessungen ab Lager bei uns erhältlich: Imperial (nach ASTM A269 / A270 und DIN 866 Reihe C) / 8 " (0,25 inch x 0,022 inch) bis 6" (6,000 inch x 0,09 inch),8 mm x 0,56 mm bis 52,40 mm x 2,77 mm Pipe (nach ASTM A2/ A999) 29,08 mm x,76 mm bis 508,00 mm x 5,54 mm NPS 8, 0, 2, 6, 20 Schedule 0S Metrisch (nach DIN 866 Reihe A),00 mm x 0,50 mm bis 5,00 mm x,50 mm Auf Anfrage ISO (nach DIN EN ISO 27 und DIN 866 Reihe B),50 mm x,60 mm bis 29,0 mm x 2,60 mm TECHNICAL TERMS OF DELIVERY Tubes and fittings are prepared for orbital welding acc. to following standards: Tubes acc. to ASTM A 269 / A 62 / A 2 (Pipe), DIN EN 027-7 / 026-5 with a length of 5900-6090 mm (max. 0% short lengths of min. 000 mm possible) Tube components Prematerial acc. to ASTM A 269 / A 62 / A2 / A40 (Pipe), DIN EN 027-7 / 026-5 Machined components Prematerial acc. to ASTM A 479, DIN EN 0088-, DIN 7440, ASTM A82 (Pipe) Tubes and fittings are permanently marked. Marking always with DOCKWEILER / DW-Number / Dimension / Material / Heat number TECHNISCHE LIEFERBEDINGUNGEN Alle Rohre und Formteile sind zum Orbitalschweißen vorbereitet und entsprechen den folgenden Normen: Rohre nach ASTM A 269 / A 62 / A 2 (Pipe), DIN EN 027-7 / 026-5 mit einer Länge von 5900-6090 mm (max. 0% Kurzlängen von min. 000 mm möglich) Rohrkomponenten Vormaterial nach ASTM A 269 / A 62 / A2 / A40 (Pipe), DIN EN 027-7 / 026-5 Drehkomponenten Vormaterial nach ASTM A 479, DIN EN 0088-, DIN 7440, ASTM A82 (Pipe) Rohre und Formteile sind dauerhaft gekennzeichnet. Die Kennzeichnung erfolgt immer mit DOCKWEILER / DW-Nummer / Abmessung / Werkstoff / Schmelzennummer 8 www.dockweiler.com 0/205
MATERIALS Depending on outer diameter welded or seamless austenitic stainless steel tubes and fittings are available in the following materials:.4404 / UNS S60 (6L).445 / UNS S60 (6L) (acc. to Basler Norm 2 (BN2)) UNS S60 (6L) The hardness is equivalent to: max. 80 HV acc. to DIN EN ISO 6507- max. 90 HRB acc. to DIN EN ISO 6508- WERKSTOFFE Abhängig vom Durchmesser sind nahtlose oder geschweißte austenitische Edelstahlrohre und Formteile in den folgenden Werkstoffen:.4404 / UNS S60 (6L).445 / UNS S60 (6L) (entspricht Basler Norm 2 (BN2)) UNS S60 (6L) Die Härte entspricht: max. 80 HV nach DIN EN ISO 6507- max. 90 HRB nach DIN EN ISO 6508- SURFACES Ra values are not defined for the inner surface. On request with Ra value 0,80µm (2 µin). The outer surface has a Ra value,00 µm (40 µin). Ra value in the cold worked area and on the surface of circumferential welds is not defined. Specified roughness is available on request. For the machining of the inner surfaces following standards apply: Free of oil and grease acc. to ASTM G9.4.. - Level A Tubes Anodic cleaning procedure acc. to Spec. Doc. 7.4-40/4.. Fittings Anodic cleaning procedure acc. to Spec. Doc. 7.4-40/4.2. OBERFLÄCHEN Ra-Werte sind für die Innenoberfläche nicht definiert. Auf Anfrage mit Ra 0,80µm (2 µin). Die Außenoberfläche hat einen Ra-Wert,00 µm (40 µin). Ra-Wert im Kaltumformbereich und auf der Rundschweißnaht von Formteilen ist nicht definiert. Mit spezifiziertem Ra-Wert auf Anfrage. Für die Bearbeitung der Innenoberflächen finden folgende Normen Anwendung: Öl- und fettfrei gem. ASTM G9.4.. - Level A Rohre Anodisches Reinigungsverfahren gem. Spez. Doc. 7.4-40/4.. Formteile Anodisches Reinigungsverfahren gem. Spez. Doc. 7.4-40/4.2. QUALITY AND TEST PROCEDURES Verification of basic test certificate Visual control Endoscopic inspection of bright finished tubes Verification of dimensions Roughness measurements QUALITÄTSKONTROLLE UND PRÜFVERFAHREN Vorzeugniskontrolle Visuelle Prüfung Endoskopie der metallblanken Rohre Baumaßkontrolle Rauheitsmessung DOKUMENTATION, PACKAGING AND SHIPPING The documentation result by the Dockweiler Inspection Certificate. acc. to DIN EN 0204. Bright finished and anodic cleaned tubes and closed with transparent PE caps (anodic clean tubes and fittings with PE/PA squares), sleeved and sealed in PE and marked with green sticker TCC.. Delivery of tubes in tubular container or wooden crate, fittings in strong cardboard box with shock-absorbing filler. DOKUMENTATION, VERPACKUNG UND VERSAND Die Dokumentation erfolgt über das Dockweiler Abnahmeprüfzeugnis. nach DIN EN 0204. Rohre und Formteile mit transparenten PE-Kappen verschlossen (anodisch gereinigte Rohre und Formteile werden zusätzlich mit PA/PE-Folienunterlagen versehen) in Folie eingeschweißt, mit grünem Aufkleber TCC.. Versand von Rohren in Köchern oder Kisten, der von Formteilen stoßgesichert in festem Karton oder Kisten. 0/205 www.dockweiler.com 9
SPECIFICATION SPEZIFIKATION TCC 04L Gas APPLICATIONS TCC 04L with that cleaned surface is widely used in production, process measurement and photovoltaic. ANWENDUNGEN TCC 04L findet mit seiner Oberfläche breite Verwendung in der Produktion, Photovoltaik sowie Mess- und Regelungstechnik. PROCESS MEASUREMENT AND CONTROL MESS- UND REGELUNGSTECHNIK PHOTOVOLTAIC PHOTOVOLTAIK DIMENSIONS All tubes and fittings are available from stock in the following sizes: Imperial (acc. to ASTM A269 / A62 and DIN 866 Series C) / 8 " (0,25 inch x 0,022 inch) to 6" (6,000 inch x 0,09 inch),8 mm x 0,56 mm to 52,40 mm x 2,77 mm Pipe (acc. to ASTM A2) Schedule 5S and 0S Other dimensions on request. ABMESSUNGEN Alle Rohre und Formteile sind in den folgenden Abmessungen ab Lager bei uns erhältlich: Imperial (nach ASTM A269 / A62 und DIN 866 Reihe C) / 8 " (0,25 inch x 0,022 inch) bis 6" (6,000 inch x 0,09 inch),8 mm x 0,56 mm bis 52,40 mm x 2,77 mm Pipe (nach ASTM A2) Schedule 5S und 0S Weitere Abmessungen auf Anfrage. TECHNICAL TERMS OF DELIVERY Tubes and fittings are prepared for orbital welding acc. to following standards: Tubes acc. to ASTM A 269 / A 2 (Pipe), DIN EN 027-7 / 026-5 with a length of 5900-6090 mm (max. 0% short lengths of min. 000 mm possible) Tube components Prematerial acc. to ASTM A 269 / A 2 / A 40 (Pipe), DIN EN 027-7 / 026-5 Machined components Prematerial acc. to ASTM A 479, DIN EN 0088-, DIN 7440, ASTM A82 (Pipe) Tubes and fittings are permanently marked. Marking always with TECHNISCHE LIEFERBEDINGUNGEN Alle Rohre und Formteile sind zum Orbitalschweißen vorbereitet und entsprechen den folgenden Normen: Rohre nach ASTM A 269 / A 2 (Pipe), DIN EN 027-7 / 026-5 mit einer Länge von 5900-6090 mm (max. 0% Kurzlängen von min. 000 mm möglich) Rohrkomponenten Vormaterial nach ASTM A 269 / A 2 / A 40 (Pipe), DIN EN 027-7 / 026-5 Drehkomponenten Vormaterial nach ASTM A 479, DIN EN 0088-, DIN 7440, ASTM A82 (Pipe) Rohre und Formteile sind dauerhaft gekennzeichnet. Die Kennzeichnung erfolgt immer mit DOCKWEILER DW-Number Dimension Material Heat number DOCKWEILER DW-Nummer Abmessung Werkstoff Schmelzennummer 20 www.dockweiler.com 0/205
MATERIALS Depending on outer diameter welded or seamless austenitic stainless steel tubes and fittings are available in the following materials:.407 UNS S040 (04L) The hardness is equivalent to: max. 80 HV acc. to DIN EN ISO 6507- max. 90 HRB acc. to DIN EN ISO 6508- WERKSTOFFE Abhängig vom Durchmesser sind nahtlose oder geschweißte austenitische Edelstahlrohre und Formteile in den folgenden Werkstoffen:.407 UNS S040 (04L) Die Härte entspricht: max. 80 HV nach DIN EN ISO 6507- max. 90 HRB nach DIN EN ISO 6508- SURFACES Ra values are not defined for the inner surface. On request with Ra value 0,80 µm (2 µin). The outer surface has no defined Ra value. Ra value in the cold worked area and on the surface of circumferential welds is not defined. Specified roughness is available on request. For the machining of the inner surfaces following standards apply: Tubes and fittings Cleaning and test procedure ASTM A 62, S OBERFLÄCHEN Ra-Werte sind für die Innenoberfläche nicht definiert. Auf Anfrage mit Ra 0,80 µm (2 µin). Für die Außenoberfläche ist der Ra-Wert nicht definiert. Ra-Wert im Kaltumformbereich und auf der Rundschweißnaht von Formteilen ist nicht definiert. Mit spezifiziertem Ra-Wert auf Anfrage. Für die Bearbeitung der Innenoberflächen finden folgende Normen Anwendung: Rohre Reinigungs- und Prüfverfahren ASTM A 62, S QUALITY AND TEST PROCEDURES Verification of basic test certificate Visual control Endoscopic inspection of bright finished tubes Verification of dimensions Roughness measurements QUALITÄTSKONTROLLE UND PRÜFVERFAHREN Vorzeugniskontrolle Visuelle Prüfung Endoskopie der metallblanken Rohre Baumaßkontrolle Rauheitsmessung DOKUMENTATION, PACKAGING AND SHIPPING The documentation result by the Dockweiler Inspection Certificate. acc. to DIN EN 0204. Tubes and fittings closed with red PE caps (anodic clean tubes and fittings with PE/PA squares), sleeved and sealed in PE and marked with orange coloured sticker TCC 04L. Delivery of tubes in tubular container or wooden crate, fittings in strong cardboard box with shock-absorbing filler. DOKUMENTATION, VERPACKUNG UND VERSAND Die Dokumentation erfolgt über das Dockweiler Abnahmeprüfzeugnis. nach DIN EN 0204. Rohre und Formteile mit roten PE-Kappen verschlossen (anodisch gereinigte Rohre und Formteile werden zusätzlich mit PA/PE-Folienunterlagen versehen) in Folie eingeschweißt, mit orangefarbigen Sticker TCC 04L. Versand von Rohren in Köchern oder Kisten, der von Formteilen stoßgesichert in festem Karton oder Kisten. 0/205 www.dockweiler.com 2
SPECIFICATION SPEZIFIKATION TCC. 04L Gas APPLICATIONS TCC. 04L with that cleaned surface is widely used in production, analysis and photovoltaics. ANWENDUNGEN TCC. 04L findet mit seiner Oberfläche breite Verwendung in der Produktion, Analytik und Photovoltaik. PHOTOVOLTAIC PHOTOVOLTAIK ANALYSIS ANALYTIK DIMENSIONS All tubes and fittings are available from stock in the following sizes: Imperial (acc. to ASTM A269 / A62 and DIN 866 Series C) / 8 " (0,25 inch x 0,022 inch) to 6" (6,000 inch x 0,09 inch),8 mm x 0,56 mm to 52,40 mm x 2,77 mm Pipe (acc. to ASTM A2) Schedule 5S and 0S Other dimensions on request. ABMESSUNGEN Alle Rohre und Formteile sind in den folgenden Abmessungen ab Lager bei uns erhältlich: Imperial (nach ASTM A269 / A62 und DIN 866 Reihe C) / 8 " (0,25 inch x 0,022 inch) bis 6" (6,000 inch x 0,09 inch),8 mm x 0,56 mm bis 52,40 mm x 2,77 mm Pipe (nach ASTM A2) Schedule 5S und 0S Weitere Abmessungen auf Anfrage. TECHNICAL TERMS OF DELIVERY Tubes and fittings are prepared for orbital welding acc. to following standards: Tubes acc. to ASTM A 269 / A 2 (Pipe), DIN EN 027-7 / 026-5 with a length of 5900-6090 mm (max. 0% short lengths of min. 000 mm possible) Tube components Prematerial acc. to ASTM A 269 / A 2 / A 40 (Pipe), DIN EN 027-7 / 026-5 Machined components Prematerial acc. to ASTM A 479, DIN EN 0088-, DIN 7440, ASTM A82 (Pipe) Tubes and fittings are permanently marked. Marking always with TECHNISCHE LIEFERBEDINGUNGEN Alle Rohre und Formteile sind zum Orbitalschweißen vorbereitet und entsprechen den folgenden Normen: Rohre nach ASTM A 269 / A 2 (Pipe), DIN EN 027-7 / 026-5 mit einer Länge von 5900-6090 mm (max. 0% Kurzlängen von min. 000 mm möglich) Rohrkomponenten Vormaterial nach ASTM A 269 / A 2 / A 40 (Pipe), DIN EN 027-7 / 026-5 Drehkomponenten Vormaterial nach ASTM A 479, DIN EN 0088-, DIN 7440, ASTM A82 (Pipe) Rohre und Formteile sind dauerhaft gekennzeichnet. Die Kennzeichnung erfolgt immer mit DOCKWEILER DW-Number Dimension Material Heat number DOCKWEILER DW-Nummer Abmessung Werkstoff Schmelzennummer 22 www.dockweiler.com 0/205
MATERIALS Depending on outer diameter welded or seamless austenitic stainless steel tubes and fittings are available in the following materials:.407 UNS S040 (04L) WERKSTOFFE Abhängig vom Durchmesser sind nahtlose oder geschweißte austenitische Edelstahlrohre und Formteile in den folgenden Werkstoffen:.407 UNS S040 (04L) SURFACES Ra values are not defined for the inner surface. On request with Ra value 0,80 µm (2 µin). The outer surface has no defined Ra value. Ra value in the cold worked area and on the surface of circumferential welds is not defined. Specified roughness is available on request. For the machining of the inner surfaces following standards apply: Free of oil and grease acc. to ASTM G9.4.. - Level A Tubes Anodic cleaning procedure acc. to Spec. Doc. 7.4-40/4.. Fittings Anodic cleaning procedure acc. to Spec. Doc. 7.4-40/4.2. OBERFLÄCHEN Ra-Werte sind für die Innenoberfläche nicht definiert. Auf Anfrage mit Ra 0,80 µm (2 µin). Für die Außenoberfläche ist der Ra-Wert nicht definiert. Ra-Wert im Kaltumformbereich und auf der Rundschweißnaht von Formteilen ist nicht definiert. Mit spezifiziertem Ra-Wert auf Anfrage. Für die Bearbeitung der Innenoberflächen finden folgende Normen Anwendung: Öl- und fettfrei gem. ASTM G9.4.. - Level A Rohre Anodisches Reinigungsverfahren gem. Spez. Doc. 7.4-40/4.. Formteile Anodisches Reinigungsverfahren gem. Spez. Doc. 7.4-40/4.2. QUALITY AND TEST PROCEDURES Verification of basic test certificate Visual control Endoscopic inspection of bright finished tubes Verification of dimensions Roughness measurements QUALITÄTSKONTROLLE UND PRÜFVERFAHREN Vorzeugniskontrolle Visuelle Prüfung Endoskopie der metallblanken Rohre Baumaßkontrolle Rauheitsmessung DOKUMENTATION, PACKAGING AND SHIPPING The documentation result by the Dockweiler Inspection Certificate. acc. to DIN EN 0204. Tubes and fittings closed with red PE caps (anodic clean tubes and fittings with PE/PA squares), sleeved and sealed in PE and marked with orange coloured sticker TCC. 04L. Delivery of tubes in tubular container or wooden crate, fittings in strong cardboard box with shock-absorbing filler. DOKUMENTATION, VERPACKUNG UND VERSAND Die Dokumentation erfolgt über das Dockweiler Abnahmeprüfzeugnis. nach DIN EN 0204. Rohre und Formteile mit roten PE-Kappen verschlossen (anodisch gereinigte Rohre und Formteile werden zusätzlich mit PA/PE-Folienunterlagen versehen) in Folie eingeschweißt, mit orangefarbigen Sticker TCC. 04L. Versand von Rohren in Köchern oder Kisten, der von Formteilen stoßgesichert in festem Karton oder Kisten. 0/205 www.dockweiler.com 2
SPECIFICATION SPEZIFIKATION COAX Gas APPLICATIONS COAX is a twin wall tube used for transport of toxic, explosive and corrosive media for the semiconductor and chemical industry. ANWENDUNGEN COAX ist ein Doppelwandrohrsystem zum Transport toxischer, explosiver und korrosiver Medien in der Halbleiterindustrie und in der chemischen Industrie. SEMICONDUCTOR HALBLEITERINDUSTRIE FINE CHEMISTRY FEINCHEMIEE DIMENSIONS The inner process tube is available from stock in the following sizes: Imperial (acc. to ASTM A269 / A62 and DIN 866 Series C) / 4 " (0,250 inch x 0,05 inch) to 6" (6,000 inch x 0,09 inch) 6,5 mm x 0,89 mm to 25,40 mm x,65 mm Other dimensions on request. ABMESSUNGEN Das Prozessrohr ist in den folgenden Abmessungen ab Lager bei uns erhältlich: Imperial (nach ASTM A269 / A62 und DIN 866 Reihe C) / 4 " (0,250 inch x 0,05 inch) bis 6" (6,000 inch x 0,09 inch) 6,5 mm x 0,89 mm bis 25,40 mm x,65 mm Weitere Abmessungen auf Anfrage. TECHNICAL TERMS OF DELIVERY Tubes and fittings are prepared for orbital welding acc. to following standards: Tubes acc. to ASTM A 269 / A 62, DIN EN 027-7 / 026-5 with a length of 5900-6090 mm (max. 0% short lengths of min. 000 mm possible) Tube components Prematerial acc. to ASTM A 269 / A 62, DIN EN 027-7 / 026-5 Machined components Prematerial acc. to ASTM A 479, DIN EN 0088-, DIN 7440, ASTM A 82 (Pipe) Tubes are permanently marked over the full length. Fittings are needle marked. Marking always with DOCKWEILER DW-Number Dimension Material Heat number TECHNISCHE LIEFERBEDINGUNGEN Alle Rohre und Formteile sind zum Orbitalschweißen vorbereitet und entsprechen den folgenden Normen: Rohre nach ASTM A 269 / A 62, DIN EN 027-7 / 026-5 mit einer Länge von 5900-6090 mm (max. 0% Kurzlängen von min. 000 mm möglich) Rohrkomponenten Vormaterial nach ASTM A 269 / A 62, DIN EN 027-7 / 026-5 Drehkomponenten Vormaterial nach ASTM A 479, DIN EN 0088-, DIN 7440, ASTM A 82 (Pipe) Rohre sind über die gesamte Länge dauerhaft gekennzeichnet. Formteile mit Nadelgravur Die Kennzeichnung erfolgt immer mit DOCKWEILER DW-Nummer Abmessung Werkstoff Schmelzennummer 24 www.dockweiler.com 0/205
MATERIALS Welded or seamless austenitic stainless steel tubes (for outer safety tube and inner process tube) are available in the following materials:.4404 / UNS S60 (6L).445 / UNS S60 (6L) (acc. to Basler Norm 2 (BN2)) UNS S60 (6L) The hardness is equivalent to: max. 80 HV acc. to DIN EN ISO 6507- max. 90 HRB acc. to DIN EN ISO 6508- WERKSTOFFE Nahtlose oder geschweißte austenitische Edelstahlrohre (Innen- und Mantelrohr) sind in den folgenden Werkstoffen lieferbar:.4404 / UNS S60 (6L).445 / UNS S60 (6L) (entspricht Basler Norm 2 (BN2)) UNS S60 (6L) Die Härte entspricht: max. 80 HV nach DIN EN ISO 6507- max. 90 HRB nach DIN EN ISO 6508- SURFACES The Ra value for the inner surface is in accordance to the quality of the process tube: Ultron*: Ra 0,25 µm (0 µin) Finetron / Finetron.*: Ra 0,40 µm (6 µin) TCC / TCC.*: not defined, on request with Ra 0,80 µm (2 µin) * for further information please see individually specification Ra value in the cold worked area of fittings (inner and outer surface), on the surface of circumferential welds as well as on the longitudinal weld seam of electropolished tubes and fittings is not defined. Specified roughness of total surface available on request. OBERFLÄCHEN Ra-Werte für die Innenoberfläche sind vom Außendurchmesser abhängig: Ultron*: Ra 0,25 µm (0 µin) Finetron / Finetron.*: Ra 0,40 µm (6 µin) TCC / TCC.*: nicht definiert, mit spezifiziertem Ra-Wert auf Anfrage Ra 0,80 µm (2 µin) * weitere Informationen entnehmen Sie bitte den Spezifikationen Ra-Wert im Kaltumformbereich, auf der Rundschweißnaht von Formteilen sowie auf der Längsschweißnaht elektropolierter Rohre und Formteile nicht definiert. Mit spezifiziertem Ra-Wert auf Anfrage. QUALITY AND TEST PROCEDURES Verification of basic test certificate Visual control Endoscopic inspection of bright finished tubes Verification of dimensions Roughness measurements QUALITÄTSKONTROLLE UND PRÜFVERFAHREN Vorzeugniskontrolle Visuelle Prüfung Endoskopie der metallblanken Rohre Baumaßkontrolle Rauheitsmessung DOKUMENTATION, PACKAGING AND SHIPPING The documentation result by the Dockweiler Inspection Certificate. acc. to DIN EN 0204. For details of packaging please see individually specification. Delivery of tubes in tubular container or wooden crate, fittings in strong cardboard box with shockabsorbing filler. DOKUMENTATION, VERPACKUNG UND VERSAND Die Dokumentation erfolgt über das Dockweiler Abnahmeprüfzeugnis. nach DIN EN 0204. Die Verpackung erfolgt gemäß des Spezifikation des Innenrohres. Versand von Rohren in Köchern oder Kisten, der von Formteilen stoßgesichert in festem Karton oder Kisten. Information of the functional principles and installation constructions can be found on page 74 Informationen zur Funktionsweise und Installationshinweise finden Sie auf Seite 74 0/205 www.dockweiler.com 25
SPECIFICATION SPEZIFIKATION VSR80 Gas APPLICATIONS VSR80 with controlled hardness and its outer surface free of longitudinal and vertical scratches is a widely acknowledged tube suitable for compression type fittings. ANWENDUNGEN VSR80 ist mit seiner spezifizierten Härte und der längs- und querriefenfreien Außenoberfläche das bewährte Verschraubungsrohr für hochdichte, wieder lösbare Verbindungen ANALYSIS ANALYTIK PROCESS MEASUREMENT AND CONTROL MESS- UND REGELUNGSTECHNIK DIMENSIONS All tubes and fittings are available from stock in the following sizes: Imperial (acc. to ASTM A269 and DIN 866 Series C) / 6 " (0,0625 inch x 0,00 inch) to " (,000 inch x 0,065 inch),59 mm x 0,25 mm to 25,40 mm x,65 mm Metric (acc. to DIN 866 Series A),00 mm x 0,50 mm to 5,00 mm x,50 mm Other dimensions on request. TECHNICAL TERMS OF DELIVERY Tubes acc. to ASTM A269, DIN EN 026-5 with a length of 5950 ± 50 mm Tubes are permanently marke over the full length. Fittings are needle marked. Marking always with: DOCKWEILER / DW-Number / Dimension / Material / Heat number MATERIALS Seamless austenitic stainless steel tubes are available in the following materials:.4404 / UNS S60 (6L) The hardness is equivalent to: max. 70-90 HRB ABMESSUNGEN Alle Rohre und Formteile sind in den folgenden Abmessungen ab Lager bei uns erhältlich: Imperial (nach ASTM A269 und DIN 866 Reihe C) / 6 " (0,0625 inch x 0,00 inch) bis " (,000 inch x 0,065 inch),59 mm x 0,25 mm bis 25,40 mm x,65 mm Metrisch (nach DIN 866 Reihe A),00 mm x 0,50 mm bis 5,00 mm x,50 mm Weitere Abmessungen auf Anfrage. TECHNISCHE LIEFERBEDINGUNGEN Rohre nach ASTM A269, DIN EN 026-5 mit einer Länge von 5950 ± 50 mm Rohre sind über die gesamte Länge dauerhaft gekennzeichnet. Formteile mit Nadelgravur. Die Kennzeichnung erfolgt immer mit: DOCKWEILER / DW-Nummer / Abmessung / Werkstoff / Schmelzennummer WERKSTOFFE Nahtlose austenitische Edelstahlrohre und Formteile in den folgenden Werkstoffen:.4404 / UNS S60 (6L) Die Härte entspricht: max. 70-90 HRB SURFACES Ra values are not defined for the inner surface. The outer surface is free of longitudinal and vertical scratches with a Ra value,00 µm (40 µin). OBERFLÄCHEN Ra-Werte sind für die Innenoberfläche nicht definiert. Die Außenoberfläche ist längs- und querriefenfrei mit einem Ra,00 µm (40 µin). QUALITY AND TEST PROCEDURES Verification of basic test certificate Visual control Verification of dimensions QUALITÄTSKONTROLLE UND PRÜFVERFAHREN Vorzeugniskontrolle Visuelle Prüfung Baumaßkontrolle DOKUMENTATION, PACKAGING AND SHIPPING The documentation result by the Dockweiler Inspection Certificate. acc. to DIN EN 0204. Delivery in tubular container or case for safe transport. DOKUMENTATION, VERPACKUNG UND VERSAND Die Dokumentation erfolgt über das Dockweiler Abnahmeprüfzeugnis. nach DIN EN 0204. Versand in Köchern oder in Kisten. 26 www.dockweiler.com 0/205
TUBES ROHRE Imperial ISO Metric Pipe 0/205 www.dockweiler.com 27
s d TUBES ROHRE l ultron finetron TCC TCC 04L x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x VSR 80 safetron weldtron bpe-direct Imperial d / s Weight / Gewicht Inch / Zoll mm kg / m / 8,8 x 0,56 0,068 / 4 6,5 x 0,89 0,24 / 8 9,5 x 0,89 0,966 / 2 2,70 x,24 0,5 / 2 2,70 x,65 0,457 / 4 9,05 x,24 0,545 / 4 9,05 x,65 0,798 25,40 x,65 0,9824 / 2 8,0 x,65,5077 2 50,80 x,65 2,0 2 / 2 6,50 x,65 2,5585 76,20 x,65,088 4 0,60 x 2, 5,2627 6 52,40 x 2,77 0,909 ultron finetron TCC TCC 04L x x x x x x x x x x x x x x x x x x VSR 80 x x = seamless (standard programme) / nahtlos (Standard) x = welded (standard programme) / geschweisst (Standard) safetron weldtron Further dimesions on request. Subject to alteration. Weitere Abmessungen auf Anfrage. Technische Änderungen vorbehalten. bpe-direct PIPE NPS Schedule 0S d / s Weight / Gewicht DN / NW mm kg / m * on request / auf Anfrage 6* 68,28 x,40 4,0400 8 29,08 x,76 20,2700 0 27,05 x 4,9 28,200 2 2,85 x 4,57 6,5400 6 406,40 x 4,78 48,0700 20 508,00 x 5,54 69,9500 28 www.dockweiler.com 0/205
ultron finetron TCC TCC 04L VSR 80 safetron weldtron bpe-direct ISO / DIN 866 d / s Weight / Gewicht DN / NW mm kg/m 8,50 x,60 0,477 0 7,20 x,60 0,6257 5 2,0 x,60 0,7902 20 26,90 x,60,048 25,70 x 2,00,5894 2 42,40 x 2,00 2,0257 40 48,0 x 2,00 2,25 50 60,0 x 2,00 2,922 65 76,0 x 2,00,754 80 88,90 x 2,0 4,994 00 4,0 x 2,0 6,4580 50 68,0 x 2,60 0,8007 200 29,0 x 2,60 4,9 ultron finetron TCC TCC 04L VSR 80 safetron weldtron x x x x x x x x x x x x x x x x x x x = seamless (standard programme) / nahtlos (Standard) x = welded (standard programme) / geschweisst (Standard) x x bpe-direct Metric / DIN 866 d / s Weight / Gewicht DN / NW mm kg/m,00 x 0,50 0,0 4 6,00 x,00 0,254 6 8,00 x,00 0,755 8 0,00 x,00 0,2256 0 2,00 x,00 0,2758 0,00 x,50 0,425 5 8,00 x,50 0,6205 5 9,00 x,50 0,658 20 2,00 x,50 0,8085 25 28,00 x,50 0,9965 25 29,00 x,50,04 2 5,00 x,50,2598 40 4,00 x,50,4854 50 5,00 x,50,967 65 70,00 x 2,00,4095 80 85,00 x 2,00 4,66 00 04,00 x 2,00 5,4 50 54,00 x 2,00 7,62 Further dimesions on request. Subject to alteration. Weitere Abmessungen auf Anfrage. Technische Änderungen vorbehalten. 0/205 www.dockweiler.com 29
s d INSTRUMENT TUBINGS INSTRUMENTIERUNGSROHRE l d / s Inner Ø / Innen Ø d / s Inner Ø / Innen Ø mm 0,0 x 0,06 0,8 0,80 x 0,20 0,40,20 x 0,0,00,20 x 0,20 0,80,59 x 0,25,09,59 x 0,0 0,99,59 x 0,40 0,79,59 x 0,45 0,69,59 x 0,59 0,4 2,00 x 0,20,60 2,00 x 0,40,20 2,00 x 0,50,00,8 x 0,56 2,06 4,00 x 0,50,00 4,00 x,00 2,00 mm 5,00 x,00,00 6,00 x 0,50 5,00 6,00 x,00 4,00 6,00 x,50,00 6,5 x 0,9 4,5 7,00 x 0,50 6,00 8,00 x 0,50 7,00 8,00 x,00 6,00 8,00 x,50 5,00 9,5 x 0,89 7,75 9,5 x,65 6,2 0,00 x 0,50 9,00 0,00 x,00 8,00 2,00 x 0,20,60 2,00 x 2,00 8,00 Further dimesions on request. Subject to alteration. Weitere Abmessungen auf Anfrage. Technische Änderungen vorbehalten. These dimensions are merely a selection of the instrumentation and capillary tubes in our stock. These tubes are available in various alloys (e.g. 04L, 6L, 6 Ti) and specifications (hard as drawn, annealed). Further dimensions and materials on request. Diese Abmessungen stellen lediglich eine Auswahl aus unserem Lagerbestand dar. Instrumentierungs- und Kapillarrohre können in verschiedenen Legierungen (z. B. in 04L, 6L, 6TI) und Ausführungen (geglüht, hartgezogen) geliefert werden. Zu weiteren Abmessungen und Materialien auf Anfrage. 0 www.dockweiler.com 0/205
ELBOWS BÖGEN 0/205 www.dockweiler.com
l l2 ELBOWS 45 BÖGEN 45 l2 l r s d ultron finetron TCC TCC 04L safetron weldtron bpe-direct Imperial d s l2 MR Inch / Zoll mm / 4 6,5 0,89 50,80 4,0 / 8 9,5 0,89 50,80 28,60 / 2 2,70,24 57,20 27,00 / 2 2,70,65 57,20 28,60 / 4 9,05,24 57,20 26,00 / 4 9,05,65 57,20 28,60 25,40,65 57,20 8,0 / 2 8,0,65 6,50 57,20 2 50,80,65 76,20 76,20 2 / 2 6,50,65 85,70 95,0 76,20,65 92,0 4,0 4 0,60 2, 4,0 52,40 6 52,40 2,77 58,80 228,60 6* 52,40 2,77 222,25 228,60 ultron finetron TCC TCC 04L safetron weldtron Further dimesions on request. Subject to alteration. Weitere Abmessungen auf Anfrage. Technische Änderungen vorbehalten. bpe-direct ISO / DIN 865 d s l2 MR DN / NW mm 8,50,60,0 20,00 0 7,20,60 6,60 28,00 5 2,0,60 7,40 0,00 20 26,90,60 5,80 28,50 25,70 2,00 55,70 8,00 2 42,40 2,00 59,70 47,50 40 48,0 2,00 6,60 57,00 50 60,0 2,00 7,50 76,00 65 76,0 2,00 94,40 95,00 80 88,90 2,0 02,40 4,50 00 4,0 2,0 8,20 52,50 50* 68,0* 2,60 94,70 228,50 50* 68,0* 2,60 49,70 228,50 * on request / auf Anfrage 2 www.dockweiler.com 0/205
ultron finetron TCC TCC 04L safetron weldtron Further dimesions on request. Subject to alteration. Weitere Abmessungen auf Anfrage. Technische Änderungen vorbehalten. bpe-direct Metric / DIN 865 DN / NW d s l2 MR mm 4 6,00,00 2,0 6,00 6 8,00,00 2,0,50 6 8,00,00 2,0 24,00 8 0,00,00,0 20,00 8 0,00,00,0 24,00 0 2,00,00 5,80 26,00 0,00,50 5,80 26,00 5 8,00,50 5,80 26,00 5 9,00,50 9,50 5,00 20 2,00,50 4,60 40,00 25 28,00,50 60,70 50,00 25 29,00,50 60,70 50,00 2 5,00,50 62,80 55,00 40 4,00,50 64,90 60,00 50 5,00,50 69,00 70,00 65 70,00 2,00 7,0 80,00 80 85,00 2,00 92,0 90,00 00 04,00 2,00 96,40 00,00 50 54,00 2,00 9,20 225,00 0/205 www.dockweiler.com
l l ELBOWS 90 BÖGEN 90 l r s d l ultron finetron TCC TCC 04L safetron weldtron bpe-direct Imperial d s l l r Inch / Zoll mm / 4 6,5 0,89 66,70 52,40 4,0 / 8 9,5 0,89 66,70 8,0 28,60 / 2 2,70,24 76,20 49,20 27,00 / 2 2,70,65 76,20 47,60 28,60 / 4 9,05,24 76,20 50,20 26,00 / 4 9,05,65 76,20 47,60 28,60 25,40,65 76,20 8,0 8,0 / 2 8,0,65 95,0 8,0 57,20 2 50,80,65 20,70 44,50 76,20 2 / 2 6,50,65 9,70 44,40 95,0 76,20,65 58,80 44,50 4,0 4 0,60 2, 20,20 50,80 52,40 6 52,40 2,77 292,0 6,50 228,60 6* 52,4* 2,77 55,60 27,00 228,60 ultron finetron TCC TCC 04L safetron weldtron Further dimesions on request. Subject to alteration. Weitere Abmessungen auf Anfrage. Technische Änderungen vorbehalten. bpe-direct ISO / DIN 865 d s l l r DN / NW d s l l r 8,50,60 45,00 25,00 20,00 0 7,20,60 5,00 25,00 28,00 5 2,0,60 55,00 25,00 0,00 20 26,90,60 68,50 40,00 28,50 25,70 2,00 78,00 40,00 8,00 2 42,40 2,00 87,50 40,00 47,50 40 48,0 2,00 97,00 40,00 57,00 50 60,0 2,00 6,00 40,00 76,00 65 76,0 2,00 50,00 55,00 95,00 80 88,90 2,0 69,50 55,00 4,50 00 4,0 2,0 207,50 55,00 52,50 * on request / auf Anfrage 4 www.dockweiler.com 0/205
ultron finetron TCC TCC 04L safetron weldtron bpe-direct Metric / DIN 865 DN / NW d s l l r mm 4 6,00,00 40,00 24,00 6,00 6 8,00,00 45,00 2,00 24,00 6* 8,00,00 45,00 25,00 20,00 8 0,00,00 45,00 25,00 20,00 8* 0,00,00 50,00 25,00 25,00 0 2,00,00 5,00 25,00 26,00 0,00,50 5,00 25,00 26,00 5 8,00,50 5,00 25,00 26,00 5 9,00,50 60,00 25,00 5,00 20 2,00,50 65,00 25,00 40,00 25 28,00,50 90,00 40,00 50,00 25 29,00,50 90,00 40,00 50,00 2 5,00,50 95,00 40,00 55,00 40 4,00,50 00,00 40,00 60,00 50 5,00,50 0,00 40,00 70,00 65 70,00 2,00 20,00 40,00 80,00 80 85,00 2,00 45,00 55,00 90,00 00 04,00 2,00 55,00 55,00 00,00 50 54,00 2,00 25,00 00,00 225,00 Further dimesions on request. Subject to alteration. Weitere Abmessungen auf Anfrage. Technische Änderungen vorbehalten. * Additional size different from DIN 865 Zusätzliches Maß abweichend von der DIN 865 0/205 www.dockweiler.com 5
l r l2 ELBOWS 80 BÖGEN 80 s d ultron finetron TCC TCC 04L safetron weldtron bpe-direct Imperial d s l l r Inch / Zoll mm / 4 6,5 0,89 66,70 9,55 57,5 / 8 9,5 0,89 66,70 9,55 57,5 / 2 2,70,65 65,00 26,90 8,0 / 2 2,70,65 76,20 9,05 57,5 / 4 9,05,65 50,00 24,00 26,00 / 4 9,05,65 76,20 9,05 57,5 25,40,65 65,00 26,90 8,0 25,40,65 76,20 8,0 8,0 / 2 8,0,65 85,00 27,80 57,20 / 2 8,0,65 4,0 57,5 57,5 2 50,80,65 0,00,80 76,20 2 50,80,65 27,00 50,80 76,20 2 / 2 6,50,65 5,00 9,70 95,0 2 / 2 6,50,65 46,0 50,85 95,25 76,20,65 55,00 40,70 4,0 76,20,65 65,0 50,80 4,0 4 0,60 2, 95,00 42,60 52,40 4 0,60 2, 25,90 6,50 52,40 6 52,40 2,77 292,0 6,50 228,60 Further dimesions on request. Subject to alteration. Weitere Abmessungen auf Anfrage. Technische Änderungen vorbehalten. 6 www.dockweiler.com 0/205
ultron finetron TCC TCC 04L safetron weldtron bpe-direct ISO / DIN 865 d s l l r DN / NW mm 8,50,60 45,00 25,00 20,00 0 7,20,60 5,00 25,00 28,00 5 2,0,60 55,00 25,00 0,00 20 26,90,60 82,00 40,00 42,00 25,70 2,00 90,00 40,00 50,00 2 42,40 2,00 2,50 40,00 72,50 40 48,0 2,00 2,50 40,00 72,50 50 60,0 2,00 5,00 40,00 95,00 65 76,0 2,00 50,00 55,00 95,00 80 88,90 2,0 69,50 55,00 4,50 00 4,0 2,0 207,50 55,00 52,50 Further dimesions on request. Subject to alteration. Weitere Abmessungen auf Anfrage. Technische Änderungen vorbehalten. 0/205 www.dockweiler.com 7
SPECIAL ELBOWS SONDERBÖGEN 0 ELBOWS 0 BÖGEN 60 ELBOWS 60 BÖGEN 88 ELBOWS 88 BÖGEN 92 ELBOWS 92 BÖGEN 90 POINT-OF-USE ELBOWS 90 BÖGEN MIT ABGANG 80 POINT-OF-USE ELBOWS 80 BÖGEN MIT ABGANG 8 www.dockweiler.com 0/205
T-PIECES T-STÜCKE 0/205 www.dockweiler.com 9
s d l T-PIECES (SHORT BRANCH) T-STÜCKE (KURZER ABZWEIG) d2 s2 l ultron finetron TCC TCC 04L safetron weldtron bpe-direct Imperial d d2 s s2 l l Inch / Zoll mm / 2 x / 2 2,70 x 2,70,65,65 95,20,5 / 4 x / 2 9,05 x 2,70,65,65 0,60,0 / 4 x / 4 9,05 x 9,05,65,65 0,60,0 x / 2 25,40 x 2,70,65,65 08,00 4,20 x / 4 25,40 x 9,05,65,65 08,00 4,20 x 25,40 x 25,40,65,65 08,00 4,20 / 2 x / 4 8,0 x 9,05,65,65 20,60 20,55 / 2 x 8,0 x 25,40,65,65 20,60 20,55 / 2 x / 2 8,0 x 8,0,65,65 20,60 2,05 2 x 50,80 x 25,40,65,65 46,00 26,90 2 x / 2 50,80 x 8,0,65,65 46,00 27,40 2 x 2 50,80 x 50,80,65,65 46,00 28,90 2 / 2 x / 2 6,50 x 8,0,65,65 58,80,75 2 / 2 x 2 6,50 x 50,80,65,65 58,80 5,25 2 / 2 x 2 / 2 6,50 x 6,50,65,65 58,80 5,25 x 76,20 x 25,40,65,65 7,50 40,60 x / 2 76,20 x 8,0,65,65 7,50 40,0 x 2 76,20 x 50,80,65,65 7,50 4,60 x 2 / 2 76,20 x 6,50,65,65 7,50 4,60 x 76,20 x 76,20,65,65 7,40 4,0 4 x / 2 0,60 x 8,0 2,,65 209,60 5,80 4 x 2 0,60 x 50,80 2,,65 209,60 54,0 4 x 2 / 2 0,60 x 6,50 2,,65 209,60 54,0 4 x 0,60 x 76,20 2,,65 209,60 55,80 4 x 4 0,60 x 0,60 2,,65 209,60 56,80 Further dimesions on request. Subject to alteration. Weitere Abmessungen auf Anfrage. Technische Änderungen vorbehalten. 40 www.dockweiler.com 0/205
ultron finetron TCC TCC 04L safetron weldtron Further dimesions on request. Subject to alteration. Weitere Abmessungen auf Anfrage. Technische Änderungen vorbehalten. bpe-direct ISO / DIN 865 d d2 s s2 l l DN / NW 0/205 www.dockweiler.com mm 8 x 8,50 x,50,60,60 64,00,75 0 x 8 7,20 x,50,60,60 68,00 0,0 0 x 0 7,20 x 7,20,60,60 68,00 0,0 5 x 8 2,0 x,50,60,60 72,00 2,5 5 x 0 2,0 x 7,20,60,60 72,00 2,5 5 x 5 2,0 x 2,0,60,60 72,00 2,5 20 x 0 26,90 x 7,20,60,60 0,00 4,95 20 x 5 26,90 x 2,0,60,60 0,00 4,95 20 x 20 26,90 x 26,90,60,60 0,00 4,95 25 x 5,70 x 2,0 2,00,60 20,00 8,5 25 x 20,70 x 26,90 2,00,60 20,00 8,5 25 x 25,70 x,70 2,00 2,00 20,00 8,5 2 x 5 42,40 x 2,0 2,00,60 0,00 22,70 2 x 20 42,40 x 26,90 2,00,60 0,00 22,70 2 x 25 42,40 x,70 2,00 2,00 0,00 22,70 2 x 2 42,40 x 42,40 2,00 2,00 0,00 2,20 40 x 5 48,0 x 2,0 2,00,60 0,00 25,65 40 x 20 48,0 x 26,90 2,00,60 0,00 25,65 40 x 25 48,0 x,70 2,00 2,00 0,00 25,65 40 x 2 48,0 x 42,40 2,00 2,00 0,00 26,5 40 x 40 48,0 x 48,0 2,00 2,00 0,00 26,65 50 x 20 60,0 x 26,90 2,00,60 80,00 2,65 50 x 25 60,0 x,70 2,00 2,00 80,00,65 50 x 2 60,0 x 42,40 2,00 2,00 80,00 2,5 50 x 40 60,0 x 48,0 2,00 2,00 80,00 2,65 50 x 50 60,0 x 60,0 2,00 2,00 80,00,65 65 x 25 76,0 x,70 2,00 2,00 220,00 40,55 65 x 2 76,0 x 42,40 2,00 2,00 220,00 40,05 65 x 40 76,0 x 48,0 2,00 2,00 220,00 40,55 65 x 50 76,0 x 60,0 2,00 2,00 220,00 4,55 65 x 65 76,0 x 76,0 2,00 2,00 220,00 4,05 80 x 2 88,90 x 42,40 2,0 2,00 260,00 46,95 80 x 40 88,90 x 48,0 2,0 2,00 260,00 46,95 80 x 50 88,90 x 60,0 2,0 2,00 260,00 47,95 80 x 65 88,90 x 76,0 2,0 2,00 260,00 49,45 80 x 80 88,90 x 88,90 2,0 2,0 260,00 49,45 00 x 50 4,0 x 60,0 2,0 2,00 20,00 60,65 00 x 65 4,0 x 76,0 2,0 2,00 20,00 62,5 00 x 80 4,0 x 88,90 2,0 2,0 20,00 62,5 00 x 00 4,0 x 4,0 2,0 2,0 20,00 6,5 4
s d l2 T-PIECES T-STÜCKE d2 s2 l ultron finetron TCC TCC 04L safetron weldtron bpe-direct Metric / DIN 865 DN / NW d d2 s s2 l l mm 0 x 0,00 x,00,50,50 70,00,50 5 x 0 9,00 x 2,00,50,00 70,00,00 5 x 0 9,00 x,00,50,50 70,00,00 5 x 5 9,00 x 9,00,50,50 70,00,00 20 x 0 2,00 x 2,00,50,00 80,00,00 20 x 0 2,00 x,00,50,50 80,00,00 20 x 5 2,00 x 9,00,50,50 80,00,00 20 x 20 2,00 x 2,00,50,50 80,00,00 25 x 0 29,00 x 2,00,50,00 00,00 6,00 25 x 0 29,00 x,00,50,50 00,00 6,00 25 x 5 29,00 x 9,00,50,50 00,00 6,00 25 x 20 29,00 x 2,00,50,50 00,00 6,00 25 x 25 29,00 x 29,00,50,50 00,00 6,00 2 x 5 5,00 x 9,00,50,50 0,00 9,00 2 x 20 5,00 x 2,00,50,50 0,00 9,00 2 x 25 5,00 x 29,00,50,50 0,00 9,00 2 x 2 5,00 x 5,00,50,50 0,00 9,50 40 x 20 4,00 x 2,00,50,50 20,00 22,00 40 x 25 4,00 x 29,00,50,50 20,00 22,00 40 x 2 4,00 x 5,00,50,50 20,00 22,50 40 x 40 4,00 x 4,00,50,50 20,00 2,00 Further dimesions on request. Subject to alteration. Weitere Abmessungen auf Anfrage. Technische Änderungen vorbehalten. 42 www.dockweiler.com 0/205
ultron finetron TCC TCC 04L safetron weldtron bpe-direct Metric / DIN 865 DN / NW d d2 s s2 l l mm 50 x 25 5,00 x 29,00,50,50 60,00 28,00 50 x 2 5,00 x 5,00,50,50 60,00 28,50 50 x 40 5,00 x 4,00,50,50 60,00 29,00 50 x 50 5,00 x 5,00,50,50 60,00 0,00 65 x 2 70,00 x 5,00 2,00,50 20,00 7,00 65 x 40 70,00 x 4,00 2,00,50 20,00 7,50 65 x 50 70,00 x 5,00 2,00,50 20,00 8,50 65 x 65 70,00 x 70,00 2,00 2,00 20,00 40,00 80 x 40 85,00 x 4,00 2,00,50 260,00 45,00 80 x 50 85,00 x 5,00 2,00,50 260,00 46,00 80 x 65 85,00 x 70,00 2,00 2,00 260,00 47,50 80 x 80 85,00 x 85,00 2,00 2,00 260,00 47,50 00 x 65 04,00 x 70,00 2,00 2,00 0,00 57,00 00 x 80 04,00 x 85,00 2,00 2,00 0,00 57,00 00 x 00 04,00 x 04,00 2,00 2,00 0,00 58,00 Further dimesions on request. Subject to alteration. Weitere Abmessungen auf Anfrage. Technische Änderungen vorbehalten. 0/205 www.dockweiler.com 4
s d l2 T-PIECES T-STÜCKE d2 s2 l ultron finetron TCC TCC 04L safetron weldtron bpe-direct Imperial d d2 s s2 l l Inch / Zoll mm / 4 x / 4 6,5 x 6,5 0,89 0,89 89,00 44,50 / 8 x / 4 9,5 x 6,5 0,89 0,89 89,00 44,50 / 8 x / 8 9,5 x 9,5 0,89 0,89 89,00 44,50 / 2 x / 4 2,70 x 6,5,24 0,89 95,20 47,60 / 2 x / 8 2,70 x 9,5,24 0,89 95,20 47,60 / 2 x / 2 2,70 x 2,70,24,24 95,20 47,60 / 2 x / 4 2,70 x 6,5,65 0,89 0,60 47,60 / 2 x / 8 2,70 x 9,5,65 0,89 0,60 47,60 / 2 x / 2 2,70 x 2,70,65,65 0,60 47,60 / 4 x / 4 9,05 x 6,5,24 0,89 0,60 50,80 / 4 x / 8 9,05 x 9,5,24 0,89 0,60 50,80 / 4 x / 2 9,05 x 2,70,24,24 0,60 50,80 / 4 x / 4 9,05 x 9,05,24,24 0,60 50,80 / 4 x / 4 9,05 x 6,5,65 0,89 08,00 50,80 / 4 x / 8 9,05 x 9,5,65 0,89 08,00 50,80 / 4 x / 2 9,05 x 2,70,65,65 08,00 50,80 / 4 x / 4 9,05 x 9,05,65,65 08,00 50,80 x / 4 25,40 x 6,5,65 0,89 08,00 54,00 x / 8 25,40 x 9,5,65 0,89 08,00 54,00 x / 2 25,40 x 2,70,65,24 08,00 54,00 x / 2 25,40 x 2,70,65,65 08,00 54,00 x / 4 25,40 x 9,05,65,24 08,00 54,00 x / 4 25,40 x 9,05,65,65 08,00 54,00 x 25,40 x 25,40,65,65 08,00 54,00 / 2 x / 2 8,0 x 2,70,65,24 20,60 60,0 / 2 x / 2 8,0 x 2,70,65,65 20,60 60,0 / 2 x / 4 8,0 x 9,05,65,24 20,60 60,0 / 2 x / 4 8,0 x 9,05,65,65 20,60 60,0 / 2 x 8,0 x 25,40,65,65 20,60 60,0 / 2 x / 2 8,0 x 8,0,65,65 20,60 60,0 2 x / 2 50,80 x 2,70,65,24 46,00 66,70 2 x / 2 50,80 x 2,70,65,65 46,00 66,70 2 x / 4 50,80 x 9,05,65,24 46,00 66,70 2 x / 4 50,80 x 9,05,65,65 46,00 66,70 2 x 50,80 x 25,40,65,65 46,00 66,70 2 x / 2 50,80 x 8,0,65,65 46,00 66,70 2 x 2 50,80 x 50,80,65,65 46,00 7,00 Further dimesions on request. Subject to alteration. Weitere Abmessungen auf Anfrage. Technische Änderungen vorbehalten. 44 www.dockweiler.com 0/205
ultron finetron TCC TCC 04L safetron weldtron bpe-direct Imperial d d2 s s2 l l Inch / Zoll mm 2 / 2 x / 2 6,50 x 2,70,65,24 58,80 7,00 2 / 2 x / 2 6,50 x 2,70,65,65 58,80 7,00 2 / 2 x / 4 6,50 x 9,05,65,65 58,80 7,00 2 / 2 x 6,50 x 25,40,65,65 58,80 7,00 2 / 2 x / 2 6,50 x 8,0,65,65 58,80 7,00 2 / 2 x 2 6,50 x 50,80,65,65 58,80 7,00 2 / 2 x 2 / 2 6,50 x 6,50,65,65 58,80 79,40 x / 2 76,20 x 2,70,65,24 7,50 79,40 x / 2 76,20 x 2,70,65,65 7,50 79,40 x / 4 76,20 x 9,05,65,65 7,50 79,40 x 76,20 x 25,40,65,65 7,50 79,40 x / 2 76,20 x 8,0,65,65 7,50 79,40 x 2 76,20 x 50,80,65,65 7,50 79,40 x 2 / 2 76,20 x 6,50,65,65 7,50 79,40 x 76,20 x 76,20,65,65 7,40 85,70 4 x / 2 0,60 x 2,70 2,,24 209,60 92,0 4 x / 2 0,60 x 2,70 2,,65 209,60 92,0 4 x / 4 0,60 x 9,05 2,,65 209,60 92,0 4 x 0,60 x 25,40 2,,65 209,60 92,0 4 x / 2 0,60 x 8,0 2,,65 209,60 92,0 4 x 2 0,60 x 50,80 2,,65 209,60 98,40 4 x 2 / 2 0,60 x 6,50 2,,65 209,60 98,40 4 x 0,60 x 76,20 2,,65 209,60 98,40 4 x 4 0,60 x 0,60 2, 2, 209,60 04,80 6 x 4 52,40 x 0,60 2,77 2, 285,80 0,20 6 x 6 52,40 x 52,40 2,77 2,77 285,80 42,90 Further dimesions on request. Subject to alteration. Weitere Abmessungen auf Anfrage. Technische Änderungen vorbehalten. 0/205 www.dockweiler.com 45
s d l2 T-PIECES T-STÜCKE d2 s2 l 46 ultron finetron TCC TCC 04L safetron weldtron Further dimesions on request. Subject to alteration. Weitere Abmessungen auf Anfrage. Technische Änderungen vorbehalten. bpe-direct ISO / DIN 865 DN / NW d d2 s s2 l l www.dockweiler.com 0/205 mm 8 x 8,50 x,50,60,60 64,00 2,00 0 x 8 7,20 x,50,60,60 68,00 4,00 0 x 0 7,20 x 7,20,60,60 68,00 4,00 5 x 8 2,0 x,50,60,60 72,00 6,00 5 x 0 2,0 x 7,20,60,60 72,00 6,00 5 x 5 2,0 x 2,0,60,60 72,00 6,00 20 x 8 26,90 x,50,60,60 0,00 55,00 20 x 0 26,90 x 7,20,60,60 0,00 55,00 20 x 5 26,90 x 2,0,60,60 0,00 55,00 20 x 20 26,90 x 26,90,60,60 0,00 55,00 25 x 0,70 x 7,20 2,00,60 20,00 60,00 25 x 5,70 x 2,0 2,00,60 20,00 60,00 25 x 20,70 x 26,90 2,00,60 20,00 60,00 25 x 25,70 x,70 2,00 2,00 20,00 60,00 2 x 5 42,40 x 2,0 2,00,60 0,00 65,00 2 x 20 42,40 x 26,90 2,00,60 0,00 65,00 2 x 25 42,40 x,70 2,00 2,00 0,00 65,00 2 x 2 42,40 x 42,40 2,00 2,00 0,00 65,00 40 x 5 48,0 x 2,0 2,00,60 0,00 65,00 40 x 20 48,0 x 26,90 2,00,60 0,00 65,00 40 x 25 48,0 x,70 2,00 2,00 0,00 65,00 40 x 2 48,0 x 42,40 2,00 2,00 0,00 65,00 40 x 40 48,0 x 48,0 2,00 2,00 0,00 65,00 50 x 20 60,0 x 26,90 2,00,60 80,00 90,00 50 x 25 60,0 x,70 2,00 2,00 80,00 90,00 50 x 2 60,0 x 42,40 2,00 2,00 80,00 90,00 50 x 40 60,0 x 48,0 2,00 2,00 80,00 90,00 50 x 50 60,0 x 60,0 2,00 2,00 80,00 90,00 65 x 25 76,0 x,70 2,00 2,00 220,00 90,00 65 x 2 76,0 x 42,40 2,00 2,00 220,00 90,00 65 x 40 76,0 x 48,0 2,00 2,00 220,00 90,00 65 x 50 76,0 x 60,0 2,00 2,00 220,00 90,00 65 x 65 76,0 x 76,0 2,00 2,00 220,00 0,00 80 x 2 88,90 x 42,40 2,0 2,00 260,00 0,00 80 x 40 88,90 x 48,0 2,0 2,00 260,00 0,00 80 x 50 88,90 x 60,0 2,0 2,00 260,00 0,00 80 x 65 88,90 x 76,0 2,0 2,00 260,00 0,00 80 x 80 88,90 x 88,90 2,0 2,0 260,00 0,00 00 x 50 4,0 x 60,0 2,0 2,00 20,00 0,00 00 x 65 4,0 x 76,0 2,0 2,00 20,00 0,00 00 x 80 4,0 x 88,90 2,0 2,0 20,00 0,00 00 x 00 4,0 x 4,0 2,0 2,0 20,00 60,00
ultron finetron TCC TCC 04L safetron weldtron bpe-direct Metric / DIN 865 DN / NW d d2 s s2 l l mm 4 x 4 6,00 x 6,00,00,00 60,00 0,00 6 x 4 8,00 x 6,00,00,00 60,00 0,00 6 x 6 8,00 x 8,00,00,00 60,00 0,00 8 x 6 0,00 x 8,00,00,00 60,00 0,00 8 x 8 0,00 x 0,00,00,00 60,00 0,00 0 x 6 2,00 x 8,00,00,00 70,00 5,00 0 x 8 2,00 x 0,00,00,00 70,00 5,00 0 x 0 2,00 x 2,00,00,00 70,00 5,00 0 x 6,00 x 8,00,50,00 60,00 5,00 0 x 8,00 x 0,00,50,00 60,00 0,00 0 x 0,00 x,00,50,50 70,00 5,00 5 x 6 8,00 x 8,00,50,00 70,00 5,00 5 x 8 8,00 x 0,00,50,00 70,00 5,00 5 x 0 8,00 x 2,00,50,00 70,00 5,00 5 x 5 8,00 x 8,00,50,50 70,00 5,00 5 x 0 9,00 x 0,00,50,00 70,00 5,00 5 x 0 9,00 x 2,00,50,00 70,00 5,00 5 x 0 9,00 x,00,50,50 70,00 5,00 5 x 5 9,00 x 9,00,50,50 70,00 5,00 20 x 0 2,00 x 2,00,50,00 80,00 40,00 20 x 0 2,00 x,00,50,50 80,00 40,00 20 x 5 2,00 x 8,00,50,50 80,00 40,00 20 x 5 2,00 x 9,00,50,50 80,00 40,00 20 x 20 2,00 x 2,00,50,50 80,00 40,00 25 x 0 28,00 x 2,00,50,00 00,00 50,00 25 x 5 28,00 x 8,00,50,50 00,00 50,00 25 x 20 28,00 x 2,00,50,50 00,00 50,00 25 x 25 28,00 x 28,00,50,50 00,00 50,00 25 x 0 29,00 x,00,50,50 00,00 50,00 25 x 5 29,00 x 9,00,50,50 00,00 50,00 25 x 20 29,00 x 2,00,50,50 00,00 50,00 25 x 25 29,00 x 29,00,50,50 00,00 50,00 Further dimesions on request. Subject to alteration. Weitere Abmessungen auf Anfrage. Technische Änderungen vorbehalten. 0/205 www.dockweiler.com 47
s d l2 T-PIECES T-STÜCKE d2 s2 l ultron finetron TCC TCC 04L safetron weldtron bpe-direct Metric / DIN 865 DN / NW d d2 s s2 l l mm 2 x 5 5,00 x 9,00,50,50 0,00 55,00 2 x 20 5,00 x 2,00,50,50 0,00 55,00 2 x 25 5,00 x 29,00,50,50 0,00 55,00 2 x 2 5,00 x 5,00,50,50 0,00 55,00 40 x 20 4,00 x 2,00,50,50 20,00 60,00 40 x 25 4,00 x 29,00,50,50 20,00 60,00 40 x 2 4,00 x 5,00,50,50 20,00 60,00 40 x 40 4,00 x 4,00,50,50 20,00 60,00 50 x 25 5,00 x 29,00,50,50 60,00 80,00 50 x 2 5,00 x 5,00,50,50 60,00 80,00 50 x 40 5,00 x 4,00,50,50 60,00 80,00 50 x 50 5,00 x 5,00,50,50 60,00 80,00 65 x 2 70,00 x 5,00 2,00,50 20,00 80,00 65 x 40 70,00 x 4,00 2,00,50 20,00 80,00 65 x 50 70,00 x 5,00 2,00,50 20,00 80,00 65 x 65 70,00 x 70,00 2,00 2,00 20,00 05,00 80 x 40 85,00 x 4,00 2,00,50 260,00 05,00 80 x 50 85,00 x 5,00 2,00,50 260,00 05,00 80 x 65 85,00 x 70,00 2,00 2,00 260,00 05,00 80 x 80 85,00 x 85,00 2,00 2,00 260,00 0,00 00 x 50 04,00 x 5,00 2,00 2,00 0,00 0,00 00 x 65 04,00 x 70,00 2,00 2,00 0,00 0,00 00 x 80 04,00 x 85,00 2,00 2,00 0,00 0,00 00 x 00 04,00 x 04,00 2,00 2,00 0,00 55,00 50 x 00 54,00 x 04,00 2,00 2,00 450,00 87,50 50 x 50 54,00 x 54,00 2,00 2,00 450,00 225,00 Further dimesions on request. Subject to alteration. Weitere Abmessungen auf Anfrage. Technische Änderungen vorbehalten. 48 www.dockweiler.com 0/205
SPECIAL T-PIECES SONDER-T-STÜCKE 45 T-PIECES 45 T-STÜCKE EXCENTRIC T-PIECES EXZENTRISCHE T-STÜCKE THERMOWELLS THERMOWELLS T-PIECES WITH VALVE T-STÜCK MIT VENTIL Y-PIECES Y-STÜCKE Y-PIECES WITH CLAMPS Y-STÜCKE MIT STUTZEN 0/205 www.dockweiler.com 49
50 www.dockweiler.com 0/205
REDUCERS REDUZIERUNGEN 0/205 www.dockweiler.com 5
s d d2 s2 CONCENTRIC REDUCERS KONZENTRISCHE REDUZIERUNGEN l ultron finetron TCC TCC 04L safetron weldtron bpe-direct Imperial d d2 s s2 l Inch / Zoll mm / 8 x / 4 9,5 x 6,5 0,89 0,89 4,28 / 2 x / 4 2,70 x 6,5,24 0,89 8,00 / 2 x / 4 2,70 x 6,5,65 0,89 47,6 / 2 x / 8 2,70 x 9,5,24 0,89 8,00 / 2 x / 8 2,70 x 9,5,65 0,89 47,6 / 4 x / 4 9,05 x 6,5,24 0,89 8,00 / 4 x / 8 9,05 x 9,5,24 0,89 60,00 / 4 x / 8 9,05 x 9,5,65 0,89 50,80 / 4 x / 2 9,05 x 2,70,24,24 60,00 / 4 x / 2 9,05 x 2,70,65,24 60,00 / 4 x / 2 9,05 x 2,70,65,65 5,98 x / 2 25,40 x 2,70,65,24 60,00 x / 2 25,40 x 2,70,65,65 6,50 x / 4 25,40 x 9,05,65,24 60,00 x / 4 25,40 x 9,05,65,65 5,98 / 2 x / 2 8,0 x 2,70,65,24 80,00 / 2 x / 4 8,0 x 9,05,65,24 80,00 / 2 x / 4 8,0 x 9,05,65,65 76,20 / 2 x 8,0 x 25,40,65,65 6,50 2 x 50,80 x 25,40,65,65 85,7 2 x / 2 50,80 x 8,0,65,65 6,50 2 / 2 x 6,50 x 25,40,65,65 00,00 2 / 2 x / 2 6,50 x 8,0,65,65 85,7 2 / 2 x 2 6,50 x 50,80,65,65 6,50 x / 2 76,20 x 8,0,65,65 07,95 x 2 76,20 x 50,80,65,65 85,7 x 2 / 2 76,20 x 6,50,65,65 66,68 4 x 2 0,60 x 50,80 2,,65 0,8 4 x 2 / 2 0,60 x 6,50 2,,65 07,95 4 x 0,60 x 76,20 2,,65 98,4 6 x 52,40 x 76,20 2,77,65 84,5 6 x 4 52,40 x 0,60 2,77 2, 42,88 Further dimesions on request. Subject to alteration. Weitere Abmessungen auf Anfrage. Technische Änderungen vorbehalten. 52 www.dockweiler.com 0/205
ultron finetron TCC TCC 04L safetron weldtron Further dimesions on request. Subject to alteration. Weitere Abmessungen auf Anfrage. Technische Änderungen vorbehalten. bpe-direct ISO / DIN 865 DN / NW d d2 s s2 l mm 0 x 8 7,20 x,50,60,60 60,00 5 x 8 2,0 x,50,60,60 60,00 5 x 0 2,0 x 7,20,60,60 60,00 20 x 8 26,90 x,50,60,60 60,00 20 x 0 26,90 x 7,20,60,60 60,00 20 x 5 26,90 x 2,0,60,60 60,00 25 x 5,70 x 2,0 2,00,60 70,00 25 x 20,70 x 26,90 2,00,60 70,00 2 x 5 42,40 x 2,0 2,00,60 80,00 2 x 20 42,40 x 26,90 2,00,60 80,00 2 x 25 42,40 x,70 2,00 2,00 80,00 40 x 5 48,0 x 2,0 2,00,60 90,00 40 x 20 48,0 x 26,90 2,00,60 90,00 40 x 25 48,0 x,70 2,00 2,00 90,00 40 x 2 48,0 x 42,40 2,00 2,00 90,00 50 x 20 60,0 x 26,90 2,00,60 00,00 50 x 25 60,0 x,70 2,00 2,00 00,00 50 x 2 60,0 x 42,40 2,00 2,00 00,00 50 x 40 60,0 x 48,0 2,00 2,00 00,00 65 x 25 76,0 x,70 2,00 2,00 0,00 65 x 40 76,0 x 48,0 2,00 2,00 0,00 65 x 50 76,0 x 60,0 2,00 2,00 0,00 80 x 50 88,90 x 60,0 2,0 2,00 0,00 80 x 65 88,90 x 76,0 2,0 2,00 0,00 00 x 65 4,0 x 76,0 2,0 2,00 5,00 00 x 80 4,0 x 88,90 2,0 2,0 5,00 50 x 00 68,0 x 4,0 2,60 2,0 * * on request / auf Anfrage 0/205 www.dockweiler.com 5
s d d2 s2 CONCENTRIC REDUCERS KONZENTRISCHE REDUZIERUNGEN l ultron finetron TCC TCC 04L safetron weldtron bpe-direct Metric / DIN 865 DN / NW d d2 s s2 l mm 6 x 4 8,00 x 6,00,00,00 8,00 8 x 4 0,00 x 6,00,00,00 8,00 8 x 6 0,00 x 8,00,00,00 8,00 0 x 4 2,00 x 6,00,00,00 8,00 0 x 6 2,00 x 8,00,00,00 8,00 0 x 8 2,00 x 0,00,00,00 8,00 0 x 6,00 x 8,00,50,00 8,00 0 x 8,00 x 0,00,50,00 8,00 5 x 8 8,00 x 0,00,50,00 8,00 5 x 0 8,00 x 2,00,50,00 8,00 5 x 8 9,00 x 0,00,50,00 60,00 5 x 0 9,00 x,00,50,50 60,00 20 x 0 2,00 x 2,00,50,00 60,00 20 x 0 2,00 x,00,50,50 60,00 20 x 5 2,00 x 8,00,50,50 60,00 20 x 5 2,00 x 9,00,50,50 60,00 25 x 5 28,00 x 8,00,50,50 70,00 25 x 20 28,00 x 2,00,50,50 70,00 25 x 5 29,00 x 9,00,50,50 70,00 25 x 20 29,00 x 2,00,50,50 70,00 2 x 5 5,00 x 9,00,50,50 80,00 2 x 20 5,00 x 2,00,50,50 80,00 2 x 25 5,00 x 29,00,50,50 80,00 Further dimesions on request. Subject to alteration. Weitere Abmessungen auf Anfrage. Technische Änderungen vorbehalten. 54 www.dockweiler.com 0/205
ultron finetron TCC TCC 04L safetron weldtron bpe-direct Metric / DIN 865 DN / NW d d2 s s2 l mm 40 x 20 4,00 x 2,00,50,50 90,00 40 x 25 4,00 x 29,00,50,50 90,00 40 x 2 4,00 x 5,00,50,50 90,00 50 x 25 5,00 x 29,00,50,50 90,00 50 x 2 5,00 x 5,00,50,50 90,00 50 x 40 5,00 x 4,00,50,50 90,00 65 x 40 70,00 x 4,00 2,00,50 0,00 65 x 50 70,00 x 5,00 2,00,50 0,00 80 x 50 85,00 x 5,00 2,00,50 0,00 80 x 65 85,00 x 70,00 2,00 2,00 0,00 00 x 65 04,00 x 70,00 2,00 2,00 5,00 00 x 80 04,00 x 85,00 2,00 2,00 5,00 50 x 80 54,00 x 85,00 2,00 2,00 70,00 50 x 00 54,00 x 04,00 2,00 2,00 70,00 Further dimesions on request. Subject to alteration. Weitere Abmessungen auf Anfrage. Technische Änderungen vorbehalten. 0/205 www.dockweiler.com 55
s d2 s2 d ECCENTRIC REDUCERS EXZENTRISCHE REDUZIERUNGEN l ultron finetron TCC TCC 04L safetron weldtron bpe-direct Imperial d d2 s s2 l Inch / Zoll mm / 2 x / 4 2,70 x 6,5,65 0,89 47,6 / 2 x / 8 2,70 x 9,5,65 0,89 47,6 / 4 x / 8 9,05 x 9,5,65 0,89 50,80 / 4 x / 2 9,05 x 2,70,65,65 5,98 x / 2 25,40 x 2,70,65,65 6,50 x / 4 25,40 x 9,05,65,65 5,98 / 2 x / 2 8,0 x 2,70,65,65 80,00 / 2 x / 4 8,0 x 9,05,65,65 76,20 / 2 x 8,0 x 25,40,65,65 6,50 2 x 50,80 x 25,40,65,65 85,7 2 x / 2 50,80 x 8,0,65,65 6,50 2 / 2 x 6,50 x 25,40,65,65 00,00 2 / 2 x / 2 6,50 x 8,0,65,65 85,7 2 / 2 x 2 6,50 x 50,80,65,65 6,50 x / 2 76,20 x 8,0,65,65 07,95 x 2 76,20 x 50,80,65,65 85,7 x 2 / 2 76,20 x 6,50,65,65 66,68 4 x 2 0,60 x 50,80 2,,65 0,8 4 x 2 / 2 0,60 x 6,50 2,,65 07,95 4 x 0,60 x 76,20 2,,65 98,4 6 x 52,40 x 76,20 2,77,65 84,5 6 x 4 52,40 x 0,60 2,77 2, 42,88 Further dimesions on request. Subject to alteration. Weitere Abmessungen auf Anfrage. Technische Änderungen vorbehalten. 56 www.dockweiler.com 0/205
ultron finetron TCC TCC 04L safetron weldtron bpe-direct ISO / DIN 865 DN / NW d d2 s s2 l mm 0 x 8 7,20 x,50,60,60 60,00 5 x 8 2,0 x,50,60,60 60,00 5 x 0 2,0 x 7,20,60,60 60,00 20 x 8 26,90 x,50,60,60 60,00 20 x 0 26,90 x 7,20,60,60 60,00 20 x 5 26,90 x 2,0,60,60 60,00 25 x 5,70 x 2,0 2,00,60 70,00 25 x 20,70 x 26,90 2,00,60 70,00 2 x 5 42,40 x 2,0 2,00,60 80,00 2 x 20 42,40 x 26,90 2,00,60 80,00 2 x 25 42,40 x,70 2,00 2,00 80,00 40 x 5 48,0 x 2,0 2,00,60 90,00 40 x 20 48,0 x 26,90 2,00,60 90,00 40 x 25 48,0 x,70 2,00 2,00 90,00 40 x 2 48,0 x 42,40 2,00 2,00 90,00 50 x 20 60,0 x 26,90 2,00,60 00,00 50 x 25 60,0 x,70 2,00 2,00 00,00 50 x 2 60,0 x 42,40 2,00 2,00 00,00 50 x 40 60,0 x 48,0 2,00 2,00 00,00 65 x 25 76,0 x,70 2,00 2,00 0,00 65 x 40 76,0 x 48,0 2,00 2,00 0,00 65 x 50 76,0 x 60,0 2,00 2,00 0,00 80 x 50 88,90 x 60,0 2,0 2,00 0,00 80 x 65 88,90 x 76,0 2,0 2,00 0,00 00 x 65 4,0 x 76,0 2,0 2,00 5,00 00 x 80 4,0 x 88,90 2,0 2,0 5,00 50 x 00 68,0 x 4,0 2,60 2,0 70,00 Further dimesions on request. Subject to alteration. Weitere Abmessungen auf Anfrage. Technische Änderungen vorbehalten. 0/205 www.dockweiler.com 57
s d2 s2 d ECCENTRIC REDUCERS EXZENTRISCHE REDUZIERUNGEN l ultron finetron TCC TCC 04L safetron weldtron bpe-direct Metric / DIN 865 DN / NW d d2 s s2 l mm 8 x 6 0,00 x 8,00,00,00 8,00 0 x 6,00 x 8,00,50,00 8,00 0 x 8,00 x 0,00,50,00 8,00 5 x 8 9,00 x 0,00,50,00 60,00 5 x 0 9,00 x,00,50,50 60,00 20 x 0 2,00 x,00,50,50 60,00 20 x 5 2,00 x 9,00,50,50 60,00 25 x 5 29,00 x 9,00,50,50 70,00 25 x 20 29,00 x 2,00,50,50 70,00 2 x 5 5,00 x 9,00,50,50 80,00 2 x 20 5,00 x 2,00,50,50 80,00 2 x 25 5,00 x 29,00,50,50 80,00 40 x 20 4,00 x 2,00,50,50 90,00 40 x 25 4,00 x 29,00,50,50 90,00 40 x 2 4,00 x 5,00,50,50 90,00 50 x 25 5,00 x 29,00,50,50 90,00 50 x 2 5,00 x 5,00,50,50 90,00 50 x 40 5,00 x 4,00,50,50 90,00 65 x 40 70,00 x 4,00 2,00,50 0,00 65 x 50 70,00 x 5,00 2,00,50 0,00 80 x 50 85,00 x 5,00 2,00,50 0,00 80 x 65 85,00 x 70,00 2,00 2,00 0,00 00 x 65 04,00 x 70,00 2,00 2,00 5,00 00 x 80 04,00 x 85,00 2,00 2,00 5,00 50 x 80 54,00 x 85,00 2,00 2,00 70,00 50 x 00 54,00 x 04,00 2,00 2,00 70,00 Further dimesions on request. Subject to alteration. Weitere Abmessungen auf Anfrage. Technische Änderungen vorbehalten. 58 www.dockweiler.com 0/205
SPECIAL REDUCERS SONDERREDUZIERUNGEN EXCENTRIC REDUCERS WITH FERRULE EXZENTRISCHE REDUZIERUNGEN MIT STUTZEN CONCENTRIC REDUCERS WITH FERRULE KONZENTRISCHE REDUZIERUNGEN MIT STUTZEN 0/205 www.dockweiler.com 59
60 www.dockweiler.com 0/205
ENDCAPS KAPPEN 0/205 www.dockweiler.com 6
s d ENDCAPS ENDKAPPEN l2 l ultron finetron TCC TCC 04L safetron weldtron bpe-direct Imperial d s l l2 Inch / Zoll mm / 4 6,5 0,89 4,75 5,00 / 8 9,5 0,89 44,45 5,00 / 2 2,70,24 /,65 44,45 5,00 / 4 9,05,24 /,65 44,45 0,00 25,40,65 44,45 0,00 / 2 8,0,65 50,80 0,00 2 50,80,65 50,80 5,00 2 / 2 6,50,65 50,80 5,00 76,20,65 50,80 5,00 4 0,60 2, 6,50 22,50 6 52,40 2,77 200,00* 50,00 ultron finetron TCC TCC 04L safetron weldtron bpe-direct Metric d s l l2 DN / NW mm 0 2,00,00 7,00 5,00 5 8,00,50 7,00 0,00 20 2,00,50 45,00 0,00 25 28,00,50 45,00 0,00 2 5,00,50 45,00 0,00 Further dimesions on request. Subject to alteration. Weitere Abmessungen auf Anfrage. Technische Änderungen vorbehalten. * Differing design: not machined but dished boiled end welded to tube stub. Abweichendes Design, nicht aus Vollmaterial gedreht, bestehend aus Klöpperboden und durch Schweißen verbundenes Rohrstück 62 www.dockweiler.com 0/205
d s s d5 d d6 d5 DOCKWEILER CAPS DOCKWEILER KAPPEN l2 l5 l6 l2 l5 l6 ultron finetron TCC TCC 04L safetron weldtron DW BPE d s l2 l5 d5 d6 l6 Inch / Zoll mm / 4 6,5 0,89 9,05 48,40 9,00-26,65 / 2 2,70,24 26,00 66,60 27,0-26,00 / 2 2,70,65 26,00 66,0 27,0-26,00 / 4 9,05,24 26,00 67,0 7,05 27,05 26,00 / 4 9,05,65 26,00 67,0 7,05 27,05 26,00 25,40,65 26,00 68,0 4,40,40 26,00 / 2 8,0,65 0,00 77,0 57,90 46,90 0,00 2 50,80,65 45,00 09,0 70,60 59,60 45,00 2 / 2 6,50,65 45,00 0,0 8,0 72,0 45,00 76,20,65 45,00,0 96,00 85,00 45,00 4 0,60 2, 55,00 2,0 2,40 0,40 55,00 6 52,40 2,77 55,00 4,0 72,20 6,20 55,00 Further dimesions on request. Subject to alteration. Weitere Abmessungen auf Anfrage. Technische Änderungen vorbehalten. 0/205 www.dockweiler.com 6
64 www.dockweiler.com 0/205
FERRULES STUTZEN 0/205 www.dockweiler.com 65
s d5 d FERRULES STUTZEN L l A / B / C ultron finetron TCC TCC 04L safetron weldtron bpe-direct Imperial d5 (D) s (S) d (F) L l (A) l (B) l ( C) Inch / Zoll mm / 4 6,5 0,89 25,00 7,0 44,50 28,70 2,70 / 8 9,5 0,89 25,00 6,4 44,50 28,70 2,70 / 2 2,70,65 25,00 5,8 44,50 28,70 2,70 / 4 9,05,65 25,00 4,7 44,50 28,70 2,70 25,40,65 50,50 7,4 44,50 28,70 2,70 / 2 8,0,65 50,50 5, 44,50 28,70 2,70 2 50,80,65 64,00 5, 57,20 28,70 2,70 2 / 2 6,50,65 77,50 5,4 57,20 28,70 2,70 76,20,65 9,00 5,5 57,20 28,70 2,70 4 0,60 2, 9,00 6,0 57,20 28,70 5,90 6 52,40 2,77 67,00 8, 76,20 8,0 9,05 ultron finetron TCC TCC 04L safetron weldtron bpe-direct ISO / DIN 2676 DN / NW d5 (D) s (S) d (F) L l (A) l (B) mm 8,50,60 25,00 5,70 28,60 2,70 0 7,20,60 25,00 5,00 28,60 2,70 5 2,0,60 50,50 8,20 6,00 2,50 20 26,90,60 50,50 7,0 6,00 2,50 25,70 2,00 50,50 5,90 6,00 2,50 2 42,40 2,00 64,00 6,80 6,00 2,50 40 48,0 2,00 64,00 5,70 6,00 2,50 50 60,0 2,00 77,50 6,00 6,00 28,00 65 76,0 2,00 9,00 5,60 48,00 28,00 80 88,90 2,0 06,00 6,00 48,00 28,00 00 4,0 2,0 0,00 5,70 48,00 28,00 Further dimesions on request. Subject to alteration. Weitere Abmessungen auf Anfrage. Technische Änderungen vorbehalten. 66 www.dockweiler.com 0/205
FERRULES TANK FERRULES STUTZEN TANKSTUTZEN ultron finetron TCC TCC 04L safetron weldtron bpe-direct Metric / DIN 2676 Inch / Zoll d5 (D) s (S) d (F) L l (A) l (B) mm 6 8,00,00 25,00 6,70 28,60 2,70 8 0,00,00 25,00 6,0 28,60 2,70 0,00,50 4,00 6,70 28,60 8,00 5 9,00,50 4,00 5,60 28,60 8,00 20 2,00,50 4,00 4,90 28,60 8,00 25 29,00,50 50,50 6,80 6,00 2,50 2 5,00,50 50,50 5,70 6,00 2,50 40 4,00,50 50,50 4,60 6,00 2,50 50 5,00,50 64,00 4,90 6,00 2,50 65 70,00 2,00 9,00 6,70 48,00 28,00 80 85,00 2,00 06,00 6,70 48,00 28,00 00 04,00 2,00 9,00 5,60 48,00 28,00 50 54,00 2,00 8,00 0,90 66,00 28,00 Further dimesions on request. Subject to alteration. Weitere Abmessungen auf Anfrage. Technische Änderungen vorbehalten. TANK FERRULES ACC. TO DIN 2676 TANKSTUTZEN NACH DIN 2676 ultron finetron TCC TCC 04L safetron weldtron bpe-direct Imperial Inch / Zoll OD Tube/ Größe d5 (D) s (S) d (F) L l (A) mm 25,40 29,50,90 50,50 6,70 4,0 / 2 8,0 42,60 4,0 50,50 4,0 4,0 2 50,80 55,70 4,0 6,90 4,40 44,50 2 / 2 6,50 68,80 4,50 77,40 4,40 44,50 76,20 8,90 4,70 90,90 4,50 46,00 4 0,0 08,0 5,70 9,00 4,80 54,00 Further dimesions on request. Subject to alteration. Weitere Abmessungen auf Anfrage. Technische Änderungen vorbehalten. 0/205 www.dockweiler.com 67
CAPS CLAMPS GASKETS DECKEL KLAMMERN DICHTUNGEN CAPS ACC. TO DIN 2676 DECKEL NACH DIN 2676 CLAMPS KLAMMERN GASKETS* DICHTUNG* ultron finetron TCC TCC 04L safetron weldtron bpe-direct Imperial d (F) A Size / Größe Size / Größe Inch / Zoll mm mm / 4 25,00 4,75 6,5 / 8 25,00 4,75 9,5 / 2 25,00 4,75 2,70 / 4 25,00 4,75 9,05 50,50 6,5 2 25,40 / 2 50,50 6,5 2 8,0 2 64,00 6,5 50,80 2 / 2 77,50 6,5 4 6,50 9,00 6,5 5 76,20 4 9,00 8,00 7 0,60 6 67,00 4,00 9 52,40 * (EPDM, PTFE, Silikon, Viton ) 68 www.dockweiler.com 0/205
CAPS ACC. TO DIN 2676 DECKEL NACH DIN 2676 CLAMPS KLAMMERN GASKETS* DICHTUNG* ultron finetron TCC TCC 04L safetron weldtron bpe-direct ISO / DIN 2676 d (F) A Size / Größe Size / Größe DN / NW mm mm 8 25,00 4,75,50 0 25,00 4,75 7,20 5 50,50 6,5 2 2,0 20 50,50 6,5 2 26,90 25 50,50 6,5 2,70 2 64,00 6,5 42,40 40 64,00 6,5 48,0 50 77,50 6,5 4 60,0 65 9,00 6,5 5 76,0 80 06,00 6,5 6 88,90 00 0,00 8,00 8 4,0 * (EPDM, PTFE, Silikon, Viton ) ultron finetron TCC TCC 04L safetron weldtron bpe-direct Metric / DIN 2676 d (F) A Size / Größe Size / Größe DN / NW mm mm 6 25,00 4,75 8,00 8 25,00 4,75 0,00 0 4,00 6,5 0,00 5 4,00 6,5 0 9,00 20 4,00 6,5 0 2,00 25 50,50 6,5 2 29,00 2 50,50 6,5 2 5,00 40 50,50 6,5 2 4,00 50 64,00 6,5 5,00 65 9,00 6,5 5 70,00 80 06,00 6,5 6 85,00 00 9,00 8,00 7 04,00 50 8,00 4,00 0 54,00 Further dimesions on request. Subject to alteration. Weitere Abmessungen auf Anfrage. Technische Änderungen vorbehalten. 0/205 www.dockweiler.com 69
SPECIAL FERRULES SONDERSTUTZEN FERRULES WITH THREAD CONNECTION STUTZEN MIT GEWINDE- ANSCHLUSS FERRULES WITH HOSE CONNECTION STUTZEN MIT SCHLAUCH- ANSCHLUSS 70 www.dockweiler.com 0/205
SPECIAL CLAMPS SONDERKLAMMERN -SEGMENT-CLAMP -SEGMENTKLAMMER -SEGMENT-CLAMP WITH HEXAGON -SEGMENTKLAMMER MIT SECHSKANT- SCHRAUBE HIGH PRESSURE CLAMP HOCHDRUCK- KLAMMER CLAMP WITH HEXAGON KLAMMER MIT SECHSKANT- SCHRAUBE 0/205 www.dockweiler.com 7
72 www.dockweiler.com 0/205
COAX COAX 0/205 www.dockweiler.com 7
COAXIAL TUBE SYSTEM DOPPELWANDROHR-SYSTEM COAXIAL TUBE SYSTEM DOPPELWANDROHR-SYSTEM The special twin wall tube system consists of an inner electrochemically polished process tube and an outer safety tube. Both are prepared for orbital welding and manufactured from high quality stainless steel AISI 6L or 04L acc. to customer specification (the tube is also available in other alloys on demand). Spacers centre the process tube and safeguard the gas flow between the outer and the inner tube. In case of a leak in the process tube the escaping medium flows into the safety space and can be neutralised and harmlessly discharged from the system. The coaxial tube system is easy to install by orbital welding and can also be integrated existing systems and plants. Das Doppelwandrohr-System von Dockweiler, bestehend aus einem inneren Prozess- und einem äußeren Sicherheitsrohr, garantiert den sicheren Transport von explosiven, toxischen und korrosiven Medien. Beide Rohre sind zum Orbitalschweißen vorbereitet und aus Edelstahl AISI 6L oder 04L hergestellt (andere Werkstoffe auf Anfrage). Abstandshalter zentrieren das Prozessrohr und gewährleisten einen sicheren Durchfluss zwischen dem inneren und dem äußeren Rohr. Bei einer auftretenden Undichtigkeit im Prozessrohr strömt das austretende Medium in den Sicherheitsraum und kann hier unschädlich gemacht und abgeleitet werden. Alle Rohre und Formteile des Doppelwandrohr-Systems von Dockweiler sind problemlos orbitalverschweißbar. Das ermöglicht eine einfache Nachrüstung auch in bereits bestehende Anlagen und Einrichtungen. Process gas Prozessgas Process gas Prozessgas Process gas Prozessgas Inert gas / Vacuum Inertgas / Vakuum 74 www.dockweiler.com 0/205
INSTALLATION INSTRUCTIONS FOR THE COAXIAL TUBE SYSTEM INSTALLATIONSHINWEISE FÜR DAS DOPPELWANDROHR-SYSTEM TUBE TO TUBE OR TUBE TO FITTING ROHR AN ROHR ODER ROHR AN FORMTEIL Inner tube / Process tube Prozessrohr Outer tube / Safety tube Sicherheitsrohr Inner tube / process tube Prozessrohr Outer tube / Safety tube Sicherheitsrohr 2 Tube A Rohr A Tube B Rohr B Tube A Rohr A Tube B Rohr B Orbital weld the process tube and helium leak test Orbitalschweißung des Prozessrohres, mit anschließendem Helium-Leck-Test - Slide the inner safety tubes together so that the weld on the inner process tube is covered - Orbital weld the outer tube and helium leak test - Zusammenschieben der äußeren Sicherheitsrohre, so dass die Naht des Prozessrohres verdeckt wird - Orbitalschweißung des Sicherheitsrohres mit anschließendem Helium- Leck-Test CLOSING THE OUTER SAFETY TUBE ABSCHLUSS DES SCHUTZROHRES Inner tube / Process tube Prozessrohr Outer tube / Safety tube Sicherheitsrohr Inner tube / Process tube Prozessrohr Outer tube / Safety tube Sicherheitsrohr 2 Closing piece Endstück Orbital weld the closing piece to the process tube Orbitalschweißung des Endstückes auf das Prozessrohr FITTING TO FITTING FORMTEIL AN FORMTEIL Outer tube / Safety tube Sicherheitsrohr Inner tube / Process tube Prozessrohr Outer tube / Safety tube Sicherheitsrohr Inner tube / Process tube Prozessrohr 2 Sleeve Hülse Sleeve Hülse Orbital weld the process tube Orbitalschweißung des Prozessrohres A sleeve is slid over both ends of the safety tube and orbital welded Eine Hülse wird über beide Rohrenden des Sicherheitsrohres geschoben und orbital verschweißt 0/205 www.dockweiler.com 75
s d2 d s2 COAX TUBES COAX ROHRE l2 l Imperial Inner Tube / Innenrohr Outer Tube / Außenrohr d s l d2 s2 l2 max. permissible design pressure / max. zul. Betriebsdruck* Inch / Zoll mm bar / 4 6,5 0,89 5950,00 2,70,24 5950,00 258 / 8 9,5 0,89 5950,00 5,88,24 5950,00 202 / 2 2,70,24 5950,00 9,05,65 5950,00 225 / 4 9,05,65 5950,00 25,40,65 5950,00 6 25,40,65 5950,00 8,0,65 5950,00 08 * Temp. 20 to 50 C; static loading; rating depends on outer tube; for detailed information (e.g. rating of inner tube) please see pressure tables in section Technical Information * Temp. 20 bis 50 C; vorw. ruhende Beanspruchung; Angabe gilt für Außenrohr; detaillierte Informationen (z. B. Angaben für das Innenrohr) finden Sie in den ausführlichen Drucktabellen im Abschnitt Technische Informationen 76 www.dockweiler.com 0/205
d2 s2 d s l4 l COAX T-PIECES COAX T-STÜCKE d4 s4 d s l l2 Imperial Inch / Zoll Main Tube / Durchgang Inner Tube / Innenrohr Branch / Abzweig Main Tube / Durchgang Outer Tube / Außenrohr Branch / Abzweig d s d s d2 s2 d4 s4 mm l l2 l l4 / 4 x / 4 6,5 0,89 6,5 0,89 2,70,24 2,70,24 27,00 88,90 6,50 44,45 / 8 x / 4 9,5 0,89 6,5 0,89 5,88,24 2,70,24 27,00 88,90 6,50 44,45 / 8 x / 8 9,5 0,89 9,5 0,89 5,88,24 5,88,24 27,00 88,90 6,50 44,45 / 2 x / 4 2,70,24 6,5 0,89 9,05,65 2,70,24,5 95,25 66,68 47,6 / 2 x / 8 2,70,24 9,5 0,89 9,05,65 5,88,24,5 95,25 66,68 47,6 / 2 x / 2 2,70,24 2,70,24 9,05,65 9,05,65,5 95,25 66,68 47,6 / 4 x / 4 9,05,65 6,5 0,89 25,40,65 2,70,24,5 95,25 66,68 47,6 / 4 x / 8 9,05,65 9,5 0,89 25,40,65 5,88,24,5 95,25 66,68 47,6 / 4 x / 2 9,05,65 2,70,24 25,40,65 9,05,65,5 95,25 66,68 47,6 / 4 x / 4 9,05,65 9,05,65 25,40,65 25,40,65,5 95,25 66,68 47,6 x / 4 25,40,65 6,5 0,89 8,0,65 2,70,24 58,75 07,95 79,8 5,98 x / 8 25,40,65 9,5 0,89 8,0,65 5,88,24 58,75 07,95 79,8 5,98 x / 2 25,40,65 2,70,24 8,0,65 9,05,65 58,75 07,95 79,8 5,98 x / 4 25,40,65 9,05,65 8,0,65 25,40,65 58,75 07,95 79,8 5,98 x 25,40,65 25,40,65 8,0,65 8,0,65 58,75 07,95 79,8 5,98 0/205 www.dockweiler.com 77
l l2 l l l2 MR d2 s2 COAX ELBOWS 45 AND 90 COAX BÖGEN 45 UND 90 d2 s2 l2 MR s d Imperial Inch / Zoll Inner Tube / Innenrohr Outer Tube / Außenrohr Dimensions / Baumaße d s d2 s2 l l2 MR / 4 6,5 0,89 2,70,24 98,45 79,40 8,0 bended / gebogen / 8 9,5 0,89 5,88,24 98,45 79,40 57,00 bended / gebogen / 2 2,70,24 9,05,65 09,26 90,2 85,00 bended / gebogen / 4 9,05,65 25,40,65 5,6 0,2 85,00 bended / gebogen 25,40,65 8,0,65 88,90 6,50 8,0 welded / geschweißt mm l2 s d l Imperial Inch / Zoll Inner Tube / Innenrohr Outer Tube / Außenrohr Dimensions / Baumaße d s d2 s2 l l2 MR / 4 6,5 0,89 2,70,24 20,70 0,65 8,0 bended / gebogen / 8 9,5 0,89 5,88,24 0,70,65 57,00 bended / gebogen / 2 2,70,24 9,05,65 84,40 65,5 85,00 bended / gebogen / 4 9,05,65 25,40,65 90,75 65,5 85,00 bended / gebogen 25,40,65 8,0,65 07,97 82,57 8,0 welded / geschweißt mm 78 www.dockweiler.com 0/205
d2 d s2 s d2 d COAX SLEEVES AND TERMINATORS COAX HÜLSEN UND ENDSTÜCKE l Imperial Process Tube / Prozessrohr Outer Tube / Außenrohr Sleeve / Hülse d d d d2 l Inch / Zoll mm / 4 6,5 2,70 2,90 5,88 0,60 / 8 9,5 5,87 6, 9,05 0,60 / 2 2,70 9,05 9,0 22,2 0,60 / 4 9,05 25,40 25,60 0,00 0,60 25,40 8,0 8,40 42,40 0,60 l Imperial Dimensions / Baumaße d d2 l Inch / Zoll mm / 4 6,5 2,70 25,40 / 8 9,5 5,88 25,40 / 2 2,70 9,05 25,40 / 4 9,05 25,40,75 25,40 8,0,75 0/205 www.dockweiler.com 79
d s l COAX PURGE TEES COAX PURGE TEES d l2 l Imperial Inner Tube / Innenrohr Outer Tube / Außenrohr d s d2 s2 l l2 l d Inch / Zoll mm Inch / Zoll / 4 6,5 0,89 2,70,24 46,00 7,00,0 / 4 VCR* / 8 9,5 0,89 5,88,24 52,40 76,20 4,80 / 4 / 2 2,70,24 9,05,65 52,40 76,20 6,40 / 4 / 4 9,05,65 25,40,65 65,0 82,55 9,60 / 4 * Trademark 25,40,65 8,0,65 65,0 82,55 45,85 / 4 80 www.dockweiler.com 0/205
d d4 d2 s2 d s l COAX BULKHEAD PURGE TEES COAX BULKHEAD PURGE TEES l2 l4 d5 l Imperial Main tube / Durchgangsrohr Branch / Abzweig Straight thread size / Gewindeabmessung d s d2 s2 l l2 l l4 VCR* Size / Kopfgröße VCR* tube size / Stutzen-Rohranschl. Inch / Zoll mm Inch / Zoll VCR* Size / Kopfgröße d d5 d4 / 4 6,5 0,89 2,70,24 242,90 44,50,5 55,00 / 4 / 4 / 4 M20 x,5 / 8 9,5 0,89 5,88,24 256,20 54,60 4,80 5,40 / 2 / 4 / 4 M0x 2 / 2 2,70,24 9,05,65 256,20 54,60 6,40 5,40 / 2 / 4 / 4 M0x 2 * Trademark (Wall aperture / Wandöffnung) 0/205 www.dockweiler.com 8
s d2 d d s2 s d2 d d s2 COAX VCR FEMALE / MALE GLANDS COAX ENDSTÜCKE MIT VCR l2 l Male l2 l Female Imperial Dimensions / Baumaße VCR* Size / Kopfgröße d s d2 s2 l l2 d Inch / Zoll mm Inch / Zoll / 4 6,5 0,89 2,70,24 88,90 9,05 / 4 / 8 9,5 0,89 5,88,24 88,90 9,05 / 2 / 2 2,70,24 9,05,65 88,90 9,05 / 2 * Trademark / 4 9,05,65 25,40,65 9,70 25,40 / 4 25,40,65 8,0,65 9,70 25,40 82 www.dockweiler.com 0/205
INFORMATION INFORMATIONEN 0/205 www.dockweiler.com 8
CERTIFICATES ZERTIFIKATE AD 2000 HPO DIN EN ISO 900 Further certificates are available on our website: Weitere Zertifikate finden Sie auf unserer Webseite www.dockweiler.com 84 www.dockweiler.com 0/205
DIN EN ISO 400 DGRL 97 2 EG and AD 2000 WO Further certificates are available on our website: Weitere Zertifikate finden Sie auf unserer Webseite www.dockweiler.com 0/205 www.dockweiler.com 85
MELTING PROCESS SCHMELZEN-HERSTELLUNG Compounds of stainless steel Fe, Cr, Ni, Mo, etc. Melting of raw material in an Electric Arc Furnace (EF) Vacuum Induction Melting (VIM) 2 Refining the steel by Argon Oxygen Decarburization (AOD) Refining the steel by Vacuum Arc Remelting (VAR) 2 Hot and cold rolling Rolling or forging of ingot Strip Cutting of strip, formation of tube, Laser welding Hollow bar Cutting of strip, formation of tube, TIG welding Annealing (induction) Calibration of tube Eddy current test Reduction (pilgering) Degrease Heat treatment Smoothing straight weld seam (pilgering machine) Annealing (induction) Calibration of tube Eddy current test Pickling Rod draw Degrease Heat treatment Plug draw Degrease Heat treatment Calibration of tube 2 x several times Plug draw Degrease Heat treatment Calibration of tube Grinding and polishing of outside surface Grinding and polishing of outside surface Eddy current test Honing Final cleaning and blow foam wads through tube Final inspection dimensional & visual surface roughness Welded and redrawn tubes OD = 2.0 6.5 mm Welded tubes OD = 2.0 4. mm Seamless tubes OD =.0 50.8 mm Alternatively Vacuum Oxygen Decarburization (VOD) is applied for refining instead of AOD 2 Base material for Ultron LM 86 www.dockweiler.com 0/205
Ausgangsmaterial Fe, Cr, Ni, Mo, etc. Erschmelzen des Rohstahls im Elektro-Ofen (EF) Vacuum Induction Melting (VIM) 2 Reinigung des Rohstahls im AOD-Verfahren (Argon Oxygen Decarburization) Reinigung des Stahls im VAR-Verfahren (Vacuum Arc Remelting) 2 Warm- und Kaltwalzen Walzen oder Schmieden, Lochen des Rundstahls Bandstahl Spalten der Bänder, Umformen und Laser-Schweißen Mutterrohr Spalten der Bänder, Umformen und WIG-Schweißen Induktionsglühen Kalibrieren der Rohre Wirbelstromprüfung Reduktion (Pilgerschritt) Entfetten Lösungsglühen Glätten der Schweißnaht im Pilgerschritt-Verfahren Glühen im Induktionsofen Kalibrieren der Rohre Wirbelstromprüfung Beizen Rohr-Stangenzug Entfetten Lösungsglühen Rohr-Stopfenzug (Dorn) Entfetten Lösungsglühen Richten 2 x mehrfache Wiederholung Rohr-Stopfenzug (Dorn) Entfetten Lösungsglühen Richten Schleifen der Außenoberfläche Schleifen der Außenoberfläche Wirbelstromprüfung Innenkonturhonen Reinigung, Stopfenschuß Qualitätskontrolle dimensional & visuell Rauheit Geschweißte und kalt nachgezogene Rohre AD = 2,0 6,5 mm Geschweißte Rohre AD = 2,0 4, mm Nahtlose Rohre AD =,0 50,8 mm Alternativ zum AOD-Prozeß wird im Induktionsofen auch unter Vakuum umgeschmolzen (VOD) 2 Basismaterial für Ultron LM 0/205 www.dockweiler.com 87
SURFACE TREATMENT OBERFLÄCHENBEHANDLUNG Basic material Ra,0 μm / 40 µin Basic material Ra 0,4 μm / 6 µin ultron base Water rinsing with pressure hose (electrical resistance MΩ cm at 25 C) Anodical cleaning (ac) acc. to Spec. Doc. 7.4-40/4.. Anodical cleaning (ac) acc. to Spec. Doc. 7.4-40/4.. Electorchemical polishing (ep) acc. to Spec. Doc. 7.4-40/4..4 Water rinsing with pressure hose (electrical resistance at 25 C 0 MΩ cm) Passivation treatment and removal of polishing residues with 5 0% nitric acid A nitric acid soaked wad is passed through the tube (x) Clean room class 00 with zones class 0 Water rinsing with pressure hose (electrical resistance MΩ cm at 25 C) Rinsing with 80 C hot DI water (el. resistance at 25 C 7 MΩ cm) Rinsing with 80 C hot DI water (el. resistance at 25 C 0 MΩ cm) Rinsing with 80 C hot DI water (el. resistance at 25 C 0 MΩ cm) Dry by blowing N2 6.0 over the surface Dry by blowing N 2 5.0 or air over the surface Final inspection visual and surface roughness Dry by blowing N 2 5.0 over the surface Final inspection visual and surface roughness Final inspection visual and surface roughness Ends of tube are capped with PE/PA foil and PE caps 2 Ends of tube are capped with PE/PA foil und PE caps 2 Ends of tube are capped with PE/PA foil und PE caps 2 Tubes are packed into sleeves (Polyethylene or Polyamid) and the ends are sealed Tubes are packed into double sleeve (PE or PA). Before sealing ends all air is exhausted from the inner sleeve by a vacuum pump TCC TCC. 04L finetron. ULTRON ultron If tubes are contaminated with dirt, dust or oil after mechanical treatment, e.g. honing, they are cleaned with an alkaline or acid detergent before any further treatment. 2 If the marking is hardly legible after the frequent cleaning steps, tubes will be marked again. 88 www.dockweiler.com 0/205
Ausgangsmaterial Ra,0 μm / 40 µin Ausgangsmaterial Ra 0,4 μm / 6 µin ultron base Spülen mit Wasser (spez. el. Widerstand MΩ cm bei 25 C) unter Hochdruck Anodische Reinigung (ac) nach Spez. Doc. 7.4-40/4.. Anodische Reinigung (ac) nach Spez. Doc. 7.4-40/ Elektopolitur (ep) nach Spez. Doc. 7.4-40/4..4 Spülen mit Wasser (spez. el. Widerstand MΩ cm bei 25 C) unter Hochdruck Passivieren der Ober fläche und Lösen von Polierrückständen in 5-0%iger HNO Dreimaliger Stopfenschuß mit 5-0%iger HNO Reinraum Klasse 00 mit Zonen Klasse 0 Spülen mit Wasser (spez. el. Widerstand MΩ cm bei 25 C) unter Hochdruck Spülen mit Wasser bei 80 C (spez. el. Widerstand bei 25 C 7,5 MΩ cm Spülen mit Wasser bei 80 C (spez. el. Widerstand bei 25 C 0 MΩ cm) Spülen mit Wasser bei 80 C (spez. el. Widerstand bei 25 C 5 MΩ cm) Trockenblasen mit N 2 6.0 Trockenblasen mit N 2 5.0 Trockenblasen mit N 2 5.0 Qualitätskontrolle visuell und Rauheit Qualitätskontrolle visuell und Rauheit Qualitätskontrolle visuell und Rauheit Verschließen der Enden mit PE/PA-Folien und PE-Kappen 2 Verschließen der Enden mit PE/PA-Folien und PE-Kappen 2 Verschließen der Enden mit PE/PA-Folien und PE-Kappen 2 Verpacken der Rohre in PE- oder PA-Folienschläuche (Enden verschweißt) Verpacken der Rohre in zwei PE- oder PA-Folienschläuche, der innere Schlauch wird vor dem Verschweißen evakuiert TCC TCC. 04L finetron. ULTRON ultron Sollten die Rohre durch mechanische Bearbeitungsschritte, wie z.b. Honen, Verunreinigungen aufweisen, so werden diese zuvor durch ein alkalisches oder saures Reinigungsbad entfernt. 2 Ist die Beschriftung der Rohre durch die zahlreichen Waschvorgänge unleserlich, werden diese neu bestempelt. 0/205 www.dockweiler.com 89
SURFACE TREATMENT OBERFLÄCHENBEHANDLUNG weldtron (bf) safetron (bf) Water rinsing with pressure hose (electrical resistance MΩ cm at 25 C) Electorchemical polishing (ep) acc. to Spec. Doc. 7.4-40/4..2 Anodical cleaning (ac) acc. to Spec. Doc. 7.4-40/4.. Electorchemical polishing (ep) acc. to Spec. Doc. 7.4-40/4.. Water rinsing with pressure hose (electrical resistance MΩ cm at 25 C) Passivation treatment and removal of polishing residues with nitric acid A nitric acid soaked wad is passed through the tube (x) Water rinsing with pressure hose (electrical resistance MΩ cm at 25 C) Rinsing with 80 C hot DI water (el. resistance at 25 C 0 MΩ cm) Dry by blowing N 2 5.0 over the surface Final inspection visual and surface roughness Ends of tube are capped with PE/PA foil und PE caps 2 Tubes are packed into sleeves (Polyethylene or Polyamid) and the ends are sealed weldtron (ac) / (ep) safetron (ac) / (ep) 2 If tubes are contaminated with dirt, dust or oil after mechanical treatment, e.g. honing, they are cleaned with an alkaline or acid detergent before any further treatment. If the marking is hardly legible after the frequent cleaning steps, tubes will be marked again. 90 www.dockweiler.com 0/205
weldtron (bf) safetron (bf) Spülen mit Wasser (spez. el. Widerstand MΩ cm bei 25 C) unter Hochdruck Elektopolitur (ep) nach Spez. Doc. 7.4-40/4..2 Anodische Reinigung (ac) nach Spez. Doc. 7.4-40/4.. Elektorpolitur (ep) nach Spez. Doc. 7.4-40/4.. Spülen mit Wasser (spez. el. Widerstand MΩ cm bei 25 C) unter Hochdruck Passivieren der Oberfläche und Lösen von Polierrückständen in HNO Dreimaliger Stopfenschuß mit HNO Spülen mit Wasser (spez. el. Widerstand MΩ cm bei 25 C) unter Hochdruck Spülen mit Wasser bei 80 C (spez. el. Widerstand bei 25 C 5 MΩ cm) Trockenblasen mit N 2 5.0 Qualitätskontrolle visuell und Rauheit Verschließen der Enden mit PE/PA-Folien und PE-Kappen 2 Verpacken der Rohre in PE- oder PA-Folienschläuche (Enden verschweißt) weldtron (ac) / (ep) safetron (ac) / (ep) 2 Sollten die Rohre durch mechanische Bearbeitungsschritte, wie z.b. Honen, Verunreinigungen aufweisen, so werden diese zuvor durch ein alkalisches oder saures Reinigungsbad entfernt. Ist die Beschriftung der Rohre durch die zahlreichen Waschvorgänge unleserlich, werden diese neu bestempelt. 0/205 www.dockweiler.com 9
SURFACE TREATMENT OBERFLÄCHENBEHANDLUNG bpe-direct SF Water rinsing with pressure hose (electrical resistance MΩ cm at 25 C) Electrochemical polishing acc. to Spec. Doc. 7.4-40/4.. Water rinsing with pressure hose (electrical resistance MΩ cm at 25 C) Passivation treatment and removal of polishing residues with nitric acid A nitric acid soaked wad is passed through the tube (x) Water rinsing with pressure hose (electrical resistance MΩ cm at 25 C) Rinsing with 80 C hot DI water (el. resistance at 25 C 0 MΩ cm) Dry by blowing N 2 5.0 over the surface Final inspection visual and surface roughness Ends of tube are capped with PE/PA foil und PE caps 2 Tubes are packed into sleeves (Polyethylene or Polyamid) and the ends are sealed bpe-direct SF4 2 If tubes are contaminated with dirt, dust or oil after mechanical treatment, e.g. honing, they are cleaned with an alkaline or acid detergent before any further treatment. If the marking is hardly legible after the frequent cleaning steps, tubes will be marked again. 92 www.dockweiler.com 0/205
bpe-direct SF Spülen mit Wasser (spez. el. Widerstand MΩ cm bei 25 C) unter Hochdruck Elektropolitur nach Spez. Doc. 7.4-40/4.. Spülen mit Wasser (spez.el. Widerstand MΩ cm bei 25 C) unter Hochdruck Passivieren der Oberfläche und Lösen von Polierrückständen in HNO Dreimaliger Stopfenschuß mit HNO Spülen mit Wasser (spez. el. Widerstand MΩ cm bei 25 C) unter Hochdruck Spülen mit Wasser bei 80 C (spez. el. Widerstand bei 25 C 5 MΩ cm) Trockenblasen mit N 2 5.0 Qualitätskontrolle visuell und Rauheit Verschließen der Enden mit PE/PA-Folien und PE-Kappen 2 Verpacken der Rohre in PE- oder PA-Folienschläuche (Enden verschweißt) bpe-direct SF4 2 Sollten die Rohre durch mechanische Bearbeitungsschritte, wie z. B. Honen, Verunreinigungen aufweisen, so werden diese zuvor durch ein alkalisches oder saures Reinigungsbad entfernt. Ist die Beschriftung der Rohre durch die zahlreichen Waschvorgänge unleserlich, werden diese neu bestempelt. 0/205 www.dockweiler.com 9
DOCKWEILER COMPANY DOCKWEILER UNTERNEHMEN HIGHEST STANDARDS IN QUALITY AND PURITY Purest surfaces. Optimized weldability. Stainless steel tube systems by Dockweiler. YOUR PARTNER FOR STAINLESS STEEL TUBE SYSTEMS Having begun in Hamburg in 955 as a hardware store, Dockweiler AG is now based in Neustadt-Glewe and is one of the market leaders in the provision of high purity stainless steel tube systems to the pharmaceutical, semiconductor, biotechnology, and other high-tech industries The company has subsidiaries in the Netherlands, the UK, Thailand, and Israel, along with offices in more than 0 countries around the globe. This ensures both short lead times and expert support for our international customers at their particular location. Different tube systems for installations that last The first products developed by Dockweiler for the semiconductor industry represent the ultimate in surface quality and purity standards. These standards are those still specified today for major projects in the semiconductor industry. To meet the particular requirements of the pharmaceutical industry for instance, high corrosion resistance and sterilizability Dockweiler has also developed special stainless steel tube systems for a range of applications within the industry. This includes a cost-efficient range of tubes and fittings in accordance with ASME BPE. Customized solutions: If you can draw it, we can make it! In addition to selling and producing standard components, Dockweiler has built up a state-of-the-art facility for special production requirements, including Class 4 and 6 cleanroom for welding, assembling, and packing high purity assemblies for transporting UHP gases. In close collaboration with the customer, an engineering team creates bespoke solutions for a whole range of different applications. With our specialist skills and experience as well as our sophisticated welding technology, we can manufacture even very complex solutions. Specific surfaces for safe equipment With decades of expertise and experience in surface optimization and finishing, we can give our customers the very best advice on how to implement the requirements of their specific application. We keep moving forward! We are always pushing ahead: for example, together with our international partners Evans Components and Carten Controls, we have developed a cost-efficient distribution system for UHP gases that significantly reduces the number of weld seams required for installation and minimizes dead space. Furthermore, to deal with the ever increasing amount of documentation, we now offer our customers the use of a modern Internet portal, making this much easier. Dockweiler customer service meeting our own high standards It is not only our high quality products that are key to the Dockweiler standard of quality but also our expert advice and outstanding customer service. Our advisers know exactly the specific requirements of the industries we supply to. This means they can provide you with expert advice on the choice of the right tube system, plan bespoke assemblies with you, and provide installation support worldwide. 94 www.dockweiler.com 0/205
IHR PARTNER FÜR ROHRSYSTEME AUS EDELSTAHL 955 als Eisenwarenhandel in Hamburg gegründet, zählt die heute in Neustadt-Glewe ansässige Dockweiler AG zu den Marktführern von hochreinen Edelstahlrohrsystemen für die Pharma- und Halbleiterindustrie, Biotechnologie sowie weiteren hochtechnisierten Industrien. Tochtergesellschaften in den Niederlanden, Großbritannien, Thailand und Israel, sowie Vertretungen in mehr als 0 Ländern weltweit, gewährleisten kurze Lieferzeiten und kompetente Betreuung unserer internationalen Kunden vor Ort. Unterschiedliche Rohrsysteme für langlebige Installationen Die ersten Produkte, die Dockweiler für die Halbleiterindustrie entwickelte, gelten als Inbegriff für den höchsten technischen Standard auf dem Gebiet der Oberflächenqualität und Reinheit. Sie werden bis heute für Großprojekte in der Halbleiterindustrie spezifiziert. Um den speziellen Anforderungen der Pharmaindustrie gerecht zu werden, wie z. B. hohe Korrosionsbeständigkeit oder Sterilisierbarkeit, entwickelte Dockweiler auch für die unterschiedlichen Anwendungen in diesem Industriezweig spezielle Edelstahlrohrsysteme. Dazu gehört unter anderem auch ein wirtschaftliches Rohr- und Fittingsprogramm gemäß ASME BPE. Wir bleiben nicht stehen! So haben wir zum Beispiel gemeinsam mit unseren internationalen Partnern, Evans Components und Carten Controls, ein wirtschaftliches Verteilersystem für Reinstgase entwickelt, bei dem die Anzahl der Schweißnähte einer Installation deutlich reduziert und der Totraum minimiert wird. Für die immer umfangreicher werdenden Dokumentationsanforderungen steht heute ein modernes Internetportal zur Verfügung, der Dokumentationsaufwand unserer Kunden deutlich vereinfacht. Dockweiler Service unser Anspruch Neben hochwertigen Produkten ist ebenso kompetente Beratung und herausragender Service ein wichtiger Baustein für den Dockweiler Qualitätsstandard. Denn unsere Berater kennen die Spezifikationen unserer Branchen genau, beraten Sie kompetent bei der Wahl des richtigen Rohrsystems, planen mit Ihnen maßgeschneiderte Baugruppen und begleiten Sie beim Einbau weltweit. Kundenspezifische Lösungen oder Können Sie es zeichnen können wir es fertigen! Neben dem Handel und der Fertigung von Standardkomponenten hat Dockweiler eine hochmoderne Sonderfertigung aufgebaut, wie z. B. einen Reinraum der Klassen 4 und 6, in dem hochreine Baugruppen für den Transport von Reinstgasen geschweißt, montiert und verpackt werden können. In enger Zusammenarbeit mit dem Kunden erarbeitet ein Engineering-Team maßgeschneiderte Lösungen für die unterschiedlichsten Anwendungen. Durch erfahrenen Fachkräfte und eine ausgereifte Schweißtechnologie, sind wir in der Lage, auch komplexe Lösungen zu fertigen. Spezifische Oberflächen für sichere Anlagen Durch unsere jahrzehntelange Erfahrung und Kompetenz in der Oberflächenoptimierung und-veredelung bieten wir unseren Kunden die optimale Beratung für die Umsetzung seiner anwendungsspezifischen Anforderungen. 0/205 www.dockweiler.com 95
DOCKWEILER SALES PARTNER DOCKWEILER VERTRIEBSPARTNER DOCKWEILER COMPANIES Germany Dockweiler AG An der Autobahn 0/20 DE-906 Neustadt-Glewe Phone: +49 87 57 58 0 Fax: +49 87 57 58 222 Email: info@dockweiler.com www.dockweiler.com 2 Austria Dockweiler Austria GmbH Stahl- und Metallhandel Auleiten 2 A-490 Ried/I. Phone: +4 775 28 59 8 Fax: +4 775 28 0 60 Email: office@dockweiler.at www.dockweiler.com Hungary Dockweiler Magyarorszagi Kereskedelmi Képviselet Vágóhid u. 4/b H-097 Budapest Phone: +6 428 07 08 Fax: +6 02 7 7 Email: dockw.mo@t-online.hu 4 Netherlands and Belgium Dockweiler B.V. Krachtenveld 5 NL-89 CD Zeewolde Postbus 97, NL-890 AB Zeewolde Phone: + 6 522 55 84 Fax: + 6 522 56 28 Email: info@dockweiler.nl www.dockweiler.com 5 Slovenia Dockweiler d.o.o. Dunajska 0 SL-000 Ljubljana Phone: +86 564 2 22 Fax: +86 564 2 2 Email: dockweiler@amis.net 6 United Kingdom Dockweiler UK Ltd. 2, Dutton Road Redwither Business Park Wrexham Industrial Estate Wrexham, LL 9UL United Kingdom Phone: +44 9 78 66 0 0 Fax: +44 9 78 66 0 57 E-mail: sales@dockweiler-uk.com www.dockweiler.com 7 Thailand Dockweiler Asia Co., Ltd. 896/ 20 Floor, Rama III Road Bangpongpang, Yannawa Bangkok 020, Thailand Phone: +66 662 682 6824 Fax: +66 662 295 029 E-Mail: info@dockweiler.com www.dockweiler.com 8 Israel Dockweiler Middle East Ltd. 4 Tfuzot Israel Street Givataim, 508 Phone: +972 57 5005 Fax: +972 57 07 Email: sales@dockweiler-me.com www.dockweiler.com EUROPE ASIA SOUTH AMERICA 6 2 22 20 6 2 5 4 26 2 7 5 28 2 4 29 2 5 6 27 8 7 24 0 9 4 9 8 0 25 96 www.dockweiler.com 0/205
DOCKWEILER INTERNATIONAL DISTRIBUTORS 9 Argentina Edelflex S.A. Av. Belgrano 2487 B6 DVD Don Torcuato/ Buenos Aires Phone: +54 47 27 20 00 Fax: +54 47 27 22 00 Email: info@edelflex.com www.edelflex.com 0 Australia High Purity Materials PO Box 067 AU-095 Reaserch, Victoria Phone: +6 488 04 82 Email: barry@highpurity.com.au www.highpurity.com.au Brasil ZDL Componentes de Processo LTDA. Av. do Estado,.507 Ponte Pequena São Paulo SP CEP: 007-000 Phone: + 227-667 Fax: + 226-02 Email: paulocatapreta@zdlcp.com.br www.zdlcp.com.br 2 Bulgaria Merkur Trading Ltd. Bistritsa, 29A Aleko St. BG-444 Sofia Phone: +5 929 92 2 46 Fax: +5 929 92 20 8 Email: rradev@merkur-trading.com www.merkur-trading.com China Shanghai Supex Industrial Supply Co., Ltd. Suncom Liauw s Plaza, th Floor, Room 206/207 No. 78, Shangcheng Road, Pudong, Shanghai 20020 P. R. China Phone: +86 2 58 28 80 Fax: +86 2 58 49 0 Email: info@supex.com.cn www.supex.com.cn 6 Finland Suomen Teknohaus Oy Ojakärsämöntie 5, P.O. Box 72 FIN-040 Tuusula Phone: +58 927 47 2 0 Fax: +58 927 47 2 0 Email: info@teknohaus.fi www.teknohaus.fi 7 France Tubes Technologies S.A. ZAC des Pierre Blanches rue du Traité de Rome F-69780 Moins Phone: + 478 20 7 8 Fax: + 478 20 46 95 Email: info@tubes-technologies.com www.tubes-technologies.com 8 India Instrumentation & Controls Behind Glaxo, Worli Off. Dr. A. Besant Road 20, T.V. Industrial Estate IN-40000 Mumbai Phone: +9 22 24 9 4 25 Fax: +9 22 24 9 0 9 Email: trivtech@vsnl.com 9 Indonesia PT Cryogas Ruko duta garden square blok H no 5 Jalan husein sastranegara - Jurumudi Tangerang 524 Phone: +62 2 54 5678 Email: rey@cryogas.com.my www.cryogas.com.my 20 Ireland Aqua Process Solutions Ltd. Herga Lodge, Castlefarm, Business Park Hospital, Co. Limerick, Phone: +5 6 8 6 7 Fax: +5 6 8 6 7 Email: e.odonnell@apsl.ie www.apsl.ie 2 Korea UCT Korea Co. SKn Techno Park Mega Center F, Sangdaewon-dong 90-, Jungwon-gu, Sungnam-city, Kyungki-do, KR-462-72, Korea Phone: +82 7 76 20 05 Fax: +82 7 76 20 06 Email: uctkorea@uctkorea.co.kr www.uctkorea.co.kr 24 Malaysia and Vietnam Cryogas Tech Sdn. Bhd. No. 4 Jalan Puta Permai A, Equine Park MY-400 Seri Kembangan, Selangor, Phone: +60 89 48 2 50 Fax: +60 89 48 78 50 Email: info@cryogas.com.my www.cryogas.com.my 25 New Zealand NDA Engineering Ltd. 709 Te Rapa Road, Private Bag 08 Hamilton, 24 New Zealand Phone: +64 07 849 29 79 Fax: +64 07 850 5 7 Email: j.moody@nda.co.nz www.nda.co.nz 26 Poland Grupa JMC Sp. z o.o. Ul Hajoty 46/ P-0-82 Warsaw Phone: +48 22 864 05 Fax: +48 22 864 20 07 Email: info@grupajmc.pl www.grupajmc.pl 27 Russia ABS Service Volgogradskiy Prospect 45A R-096 Moscow Phone: +7 495 744 0 40 Fax: +7 495 740 02 42 Email: info@dockweiler.ru www.dockweiler.ru 0 Singapore CSK-BIO Pte Ltd 50 Ubi Avenue, Frontier, # 02-07 SG-408866 Singapore Phone: +65 67 49 22 70 +67 49 22 8 Fax: +65 67 49 58 59 Email: sales@csk-bio.com www.csk-bio.com Spain Quilinox S.L. C/Louis Pasteur, 4. Parque Tecnológico de Valencia 46980, Paterna (VALENCIA) Phone: +4 902 0 4 6 Fax: +4 902 87 6 77 Email: quilinox@quilinox.com www.quilinox.com 2 Sweden Rossing & Jansson AB Tagenevägen 5 S-4257 Hisings Kärra Phone: +46 57 02 25 Fax: +46 57 54 9 Email: peter@rossingjansson.se www.rossingjansson.se Switzerland Connectors Verbindungstechnik AG Zürcherstrasse 9 CH-7 Tagelswangen Phone: +4 52 54 68 68 Fax: +4 52 54 68 60 Email: info@connectors.ch www.connectors.ch 4 Taiwan First Elite Enterprise Co. Ltd. F No. 8 Xinhu Ist. Rd. Neihu Dist. Taipei 4 Taiwan, R.O.C. Phone: +886 2 87 97 88 99 Fax: +886 2 87 97 8 Email: auto.pipe@msa.hinet.net www.autopipe.com.tw 4 Croatia ASKON Internacional d.o.o. Trg. J. Lembergera 2 HR - 4922 Sveti Križ Začretje Phone: +85 49 228577 Fax: +85 49 228577 Email: info@askon.hr 5 Denmark Alflow Scandinavia A/S Adalen 9 DK-6600 Vejen Phone: +45 76 96 2 0 Fax: +45 75 6 4 7 Email: alflow@alflow.dk www.alflow.dk 2 Italy R.T.R. / Roberto Tomassini Rappresentanze Via Valparaiso N. 5 I-2044 Milano Phone: +9 02 4 92 2 Fax: +9 02 4 94 4 Email: roberto.tomassini@ tomassinirappresentanze.com 22 Japan Eurotechno Ltd. Kinsan Bidg. 6F 4--2 Nihombashi Muro-mach, Chuo-ku, Tokyo 0-0022 Phone: +8--6262-085 Fax: +8--6262-0854 Email: m_shimada@euro-techno.com www.euro-techno.com 28 Romania String Rumania Libertatii 7 RO-2022 Buzau Phone: +40 28 72 62 80 Fax: +40 28 7 58 00 Email: Liviu.grigore@string.ro www.string.ro/ 29 Serbia / Bosnia Macedonia / Montenegro Eurocons group D.O.O Trg Save Kovacevica / RS- 2600 Vrsac Phone: +8 80 4 60 Email: goran@eurocons.rs www.eurocons.rs 5 Turkey Durko Çevre Enerji Tekniği ve Ticaret A.S. Bulgurlu Cad. No.: 804696 Kisikli / Çamlica / Istanbul Phone: +90 26 402 20 00 Email metin.kocaoglu@durkocevre.com.tr www.durkocevre.com.tr 6 Ukraine 5 Ukraine Hermes-Optima Ltd. 6/ building Sidorenkovskaya street, office 5 624 Kharkiv Phone: +8 057 77 48 05 Email hermes-optima@ukr.net 0/205 www.dockweiler.com 97
DOCKWEILER SALES PARTNER DOCKWEILER VERTRIEBSPARTNER DOCKWEILER US DISTRIBUTORS Warehouse Locations Field Offices Banner Industries, Inc. www.bannerindustries.com New England One Industrial Drive Danvers, MA 092 Phone: 978 777 0080 Fax: 978 777 0440 Email: NewEnglandSales@ bannerindustries.com Malta 20 Tech Trail Malta, NY 2020 Phone: 58 899 6400 Fax: 58 899 640 Email: MaltaSales@ bannerindustries.com TriState 754 Roble Road Unit 0 Allentown, PA 809 Phone: 60 2 08 Fax: 60 2 0464 Email: TriStateSales@ bannerindustries.com MidAtlantic 000 Nokesville Rd Manassas, VA 200 Phone: 70 92 20 Fax: 70 92 22 Email: MidAtlanticSales@ bannerindustries.com Durham 60 E. Geer Street Unit B Durham, NC 27704 Phone: 99 956 8545 Fax: 99 956 805 Email: SouthEastSales@ bannerindustries.com Southeast 2809 Marsala Court Orlando, FL 2806 Phone: 407 0200 Fax: 407 020 Email: SouthEastSales@ bannerindustries.com Twin City Region 08 West 82nd Street Chaska, MN 558 Phone: 952 44 4772 Fax: 952 44 4772 Email: TwinCitySales@ bannerindustries.com Dallas Region 54 Exchange Drive Richardson, TX 7508 Phone: 972 406 900 Fax: 972 406 975 Email: DallasSales@ bannerindustries.com Austin Region 6074 Central Commerce Dr. Suite B-0 Pflugerville, TX 78660 Phone: 52 25 620 Fax: 52 25 62 Email: AustinSales@ bannerindustries.com Mountain States 550 East 400 North Trailer T-7 Lehi, UT 8404 Phone: 80 86 0200 Fax: 80 86 8 Email: MountainStateSales@ bannerindustries.com Northwest 7275 NW Evergreen Parkway Suite 00 Hillsboro, OR 9724 Phone: 50 924 877 Fax: 50 924 878 Email: NorthWestSales@ bannerindustries.com Southwest 850 S. Kyrene Road Unit 08 Tempe, AZ 85284 Phone: 480 96 Fax: 480 96 8 Email: SouthWestSales@ bannerindustries.com Silicon Valley 20 Keller Street Santa Clara, CA 95054 Phone: 408 564 0079 Fax: 408 564 024 Email: CaliforniaSales@ bannerindustries.com Partner Company Evans Components Inc. 7606 SW Bridgeport Road Portland, Oregon 97224 Phone: 97 249 600 Fax: 97 249 60 Email: customersupport@ evanscomponents.com www.evanscomponents.com 98 www.dockweiler.com 0/205
0/205 www.dockweiler.com 99
Your local office Dockweiler AG An der Autobahn 0/20 906 Neustadt-Glewe Germany Phone: + 49 8757 58 0 Fax: + 49 8757-222 E-mail: sales@dockweiler.com Web: www.dockweiler.com 0/205