PLASTIC PRODUCTS TO KSA. Richard Klasen, SGS Juni 2018 Anna Jahnke, TÜV Rheinland

Transkript

1 PLASTIC PRODUCTS TO KSA Richard Klasen, SGS Juni 2018 Anna Jahnke, TÜV Rheinland

2 AGENDA Registrierung für Importeure und Hersteller Relevante Produkte Zertifizierungs-Prozess Labels Erfahrungen SGS Holding Deutschland B.V. & Co. KG 2018 All rights reserved SGS is a registered trademark of SGS Group Management SA 2

4 REGISTRIERUNG No Description Details 1 Registration (Applicant) 2 Registration Costs (Applicant) 1. Registration form 2. A declaration to only use the additives licensed by SASO from the manufacturer / importer of the degradable plastic product. 3. Quality management system 4. Declaration, ensure that the additive is safe for food- contact (and approve to renewal the additive certificate every (3) years 5. The importers shall ensure placing the logo SASO for every imported product by them, and shall provide SASO with a list of the factories imported from. 1. Costs of application= 500 SAR 2. studying technical documents = 2500 SAR / per business day 3. license to use the logo = 600 SAR / per product 4. audit visits / inspection of factories = 3000 SAR / per business day 3 Documents Review (SASO) 1. Documents shall be reviewed to ensure, validity, conformity, and fulfillment to relevant all needed requirements SGS Holding Deutschland B.V. & Co. KG 2018 All rights reserved SGS is a registered trademark of SGS Group Management SA 4

5 REGISTRIERUNG No Description Details 4 Clearance (Customs) 1. The license shall be granted to place the logo on their product 2. If the product did not pass conformity, shall be make requested modifications The license validity, for the logo to be used on the product, is one renewable year, provided that the manufacturer / importer shall apply to renew the license one month prior to its date of expiry. 5 Logo Placement (Applicant) 1. Shall be placed on plastic products, at the bottom, in a clear place. 2. Shall be placed on the plastic product in a size that is not smaller than (3 x 4.5 cm), and not larger than (4 x 6 cm). 3. For small size products that are difficult to print on, the logo shall be placed on the package. 4. Shall be clearly legible and non-erasable. SGS Holding Deutschland B.V. & Co. KG 2018 All rights reserved SGS is a registered trademark of SGS Group Management SA 5

6 REGISTRIERUNG No Description Details 6 Logo Licensing (SASO) 7 Market Monitoring (Ministry of Commerce and Investment) 1. Clearance of the products with logo installed. 2. The Customs shall have a list of the importers of plastic products who are registered at SASO, as well as a list of factories outside the Kingdom that the importers deal with. No product shall be allowed to be cleared unless the supplier /factory - that the importer deals with - is in the registered list. When detecting the market any violation found (such as: not placing the logo or installing it incorrectly, being illegible, or the product is non-conforming.. etc), SASO has the right to take the necessary action (e.g. revoking the license certificate, withdrawing the product from the market and warehouses, products destruction, or any legal action deemed appropriate by SASO) SGS Holding Deutschland B.V. & Co. KG 2018 All rights reserved SGS is a registered trademark of SGS Group Management SA 6

7 RELEVANTE PRODUKTE I Phase 1: Includes products described in the table. Date of application starts from 17 Rajab 1438 AH/ 14 April No. Product Name Custom Code 1 1. Shopping bags 2. Garbage bags 3. Clothes bags ; ; ; ; Disposable Sheet rolls (table covers) ; Flower wraps ; ; ; Stretch films (packaging) Overwraps (Plastic covers used for secondary packaging) ; ; ; Shrink Films Cling films (packaging) Packaging bags used for bread, nuts, sweets and all bakery items SGS Holding Deutschland B.V. & Co. KG 2018 All rights reserved SGS is a registered trademark of SGS Group Management SA 7

8 RELEVANTE PRODUKTE II Phase 2: Includes products described in the table. Date of application starts from 19 Dhu al-qa'dah 1439 AH/ 01 August, No. Product Name Custom Code 1 Bubble wrap and cushioning packaging ; ; ; Bags for postal use, example: A. Carrier bags B. Courier and security bags C. Mail order bags (magazine and newspaper bags) 3 Disposable tableware (such as plates, spoons and cups) SGS Holding Deutschland B.V. & Co. KG 2018 All rights reserved SGS is a registered trademark of SGS Group Management SA 8

9 RELEVANTE PRODUKTE III Phase 3: Includes products described in the table. Date of application starts from 29 Dhu al-qa'dah 1440 AH/ 01 August, No. Product Name Custom Code 1 Diaper wraps 2 Plastic liners (used for cartons) Personal care products (such as: gloves, shoe covers, and any disposable personal care products) 4 Plastic bags used in soil remediation, agricultural/horticultural applications (such as: banana bags, mulch films) ; ; Plastic bags used for seedlings Food packaging bags 7 Woven plastic bags SGS Holding Deutschland B.V. & Co. KG 2018 All rights reserved SGS is a registered trademark of SGS Group Management SA 9

10 Bio-Degradable Plastics Ablauf der Zertifizierung Anbieter/Hersteller stellt Auftrag zur Zertifizierung von Bio-Degradable Plastic Products Anbieter/Hersteller reicht Antragsunterlagen ein (Zeichnungen und Diagramme, Liste der geltenden SASO Standards, Technische Spezifikation, Proben und Testberichte) Von SASO anerkanntes Prüflabor TÜV Rheinland bewertet alle zertifizierungsrelevanten Unterlagen SASO stellt das Zertifikat aus erteilt das Zeichennutzungsrecht des OXO-Bio-degradable Labels Bitte Fußzeile einfügen

11 Bio-Degradable Plastics Standard List was wird geprüft? Bitte Fußzeile einfügen

12 Bio-Degradable Plastics Ab dem 12. Dezember 2017 müssen Plastikprodukte (welche auf der HS-Code-Liste aufgeführt sind) sowie das Verpackungsmaterial für die Entsendungen schrittweise mit dem Logo OXO- Biodegradable (biologisch abbaubar) versehen werden. Biologisch abbaubar: Eigenschaft eines Materials, das mit Hilfe von natürlich vorkommenden Mikroorganismen wie Bakterien, Pilze und Algen wieder in Wasser, Kohlendioxid und Biomasse umwandelt wird. Ohne das entsprechende Logo können die Exporte nicht nach Saudi-Arabien abgewickelt werden Bitte Fußzeile einfügen

13 Bio-Degradable Plastics BDP Logo Label Requirement: Label affixed on product in a visible place, if not possible on the product, to be affixed on direct package Made of Materials that ensures durability of the Label. Label Size: on the lower part of the Plastic Article Not less than 3X4.5 cm and not more than 4X6 cm Product Labelling to include Manufacturer Name, Brand, COO, Production Date, Barcode, Storage and Expiration conditions A QR Code will be generated by SASO to be affixed with the Logo Bitte Fußzeile einfügen

14 Bio-Degradable Plastics BDP Logo Authorization Process Authorized Additives Manufacturers (SQM) start Plastics Manufacturer shall use the raw material from the authorized Additives Manufacturers in Production Result of Evaluation LAB Testing Plastic Product 1 Plastics Manufactur er 2 Application to SASO + Technical Documentation. Supplier DoC. Test Reports SASO 1 R-CAB Technical Review and Evaluation of Technical Documentation Test Reports Type Approval and BDP Logo Authorization 14 8/22/2017 SALEEM Program - Bio-Degradable Plastics

15 Bio-Degradable Plastics BDP Logo Service Fees Item Fees SAR (USD) Entity Application to SASO 500 (134) SASO Testing Technical Documentation Review Factory Inspection Fees Lab Quotation 2500 (666.63) per working day 3000 (800) per working day Testing LAB R-CAB R-CAB SASO Remarks Per Application Non- Refundable Per Item No. of Working Days depends on number of Products BDP Logo Authorization 600 (160) SASO Per Product 15 8/22/2017 SALEEM Program - Bio-Degradable Plastics

16 Bio-Degradable Plastics Authorized Additives Manufacturers (SQM) Factory Name Contact Details EPI Environmental Products, Inc. / EPI PMJ Joint Stock Company P-Life Wells Plastics Ltd / Reverte Symphony Environmental Ltd d2w Astra Polymers Compunding co.ltc Ted Tung (Account Executive) Canada T: F: tedtung@epi-global.com Pham Vhan Huong (Director) Vietnam T: info@pmj.vn John James (Export Manager) (United Kingdom) T: M: johnjames@wellsplastics.com Robert Bobroff (United Kingdom) T: T: robert.bobroff@d2w.net Azzam Mishal (KSA) T: M: azzam@astra-polymers.com Ibraheem Altassan Chemicals PO Box Dubai, UAE Mobile: Fathima Rajudin (Logistics) Rakha Al-Khaleej International UAE T: , M: fatima@rai-uae.com Al Talah Al Khadra (KSA) Contact: Mr. Ahmed Naeem M: info@talah-khadra.com Eco-Polymers (UAE) Tel: info@ecopolyuae.com 16 8/22/2017 SALEEM Program - Bio-Degradable Plastics

17 ERFAHRUNGEN Bisher nur teilweise umgesetzt Immer noch Klärung gilt das auch Umschließung / Verpackung Noch keine Informationen wie geht es weiter zum 01. August 2018 Kundenrückmeldungen und Erfahrungen aus Inspektionen SGS Holding Deutschland B.V. & Co. KG 2018 All rights reserved SGS is a registered trademark of SGS Group Management SA 17

18 THANK YOU FOR YOUR ATTENTION! Anna Jahnke Phone: +49 (0) Cell: Fax: +49 (0) LEGAL DISCLAIMER This document remains the property of TÜV Rheinland. It is supplied in confidence solely for information purposes for the recipient. Neither this document nor any information or data contained therein may be used for any other purposes, or duplicated or disclosed in whole or in part, to any third party, without the prior written authorization by TÜV Rheinland. This document is not complete without a verbal explanation (presentation) of the content. TÜV Rheinland AG

19 KONTAKT Richard Klasen Governments and Institutions (GIS) Head of GIS SGS Germany GmbH Rödingsmarkt 16 D Hamburg t m richard.klasen@sgs.com SGS Holding Deutschland B.V. & Co. KG 2018 All rights reserved SGS is a registered trademark of SGS Group Management SA 19