SD-Series. Dimensions / Abmessungen. How to order / Bestellanleitung. Specification / Spezifikation. Models / Modelle. Slide Type / Flachschieber

Transkript

1

2 SD-Series Slide Type / Flachschieber Mechanical Life: min switch operations each Electrical Life: min switch operation each Operation force: less than 800 g Switching:... Mechanische Lebenserwartung: min Schaltoperation Elektrische Lebenserwartung: min Schaltoperation Schaltkraft: kleiner 800 g Dauerlast: 100 ma, 50 VDC Scahltlast: max Schaltung: einpoliger Schalter Example: SDF-08-N is a Standard Slide DIP with 8 positions, flat actuator and No Sealing Tape SD ,83/(0,151) SD ,08/(0,239) SD ,62/(0,339) SD ,16/(0,439) SD ,7/(0,539) SD ,24/(0,639) SD ,78/(0,739) SD ,32/(0,839) SD ,86/(0,939) SD ,4/(1,039) SD ,4/(1,239)

3 PD-Series Pianotype / Klaviertype Mechanical Life: min switch operations each Electrical Life: min switch operation each Operation force: 400 g g Switching: Standard: On Down... Mechanische Lebenserwartung: min Schaltoperation Elektrische Lebenserwartung: min Schaltoperation Schaltkraft: kleiner 800 g Dauerlast: 100 ma, 50 VDC Scahltlast: max Schaltung: einpoliger Schalter Example: PDL-08 DN is a Long Key Piano DIP with 8 positions, On is up (= Off is up) and No Sealing Tape PD ,26/(0,246) PD ,06/(0,357) PD ,34/(0,446) PD ,88/(0,546) PD ,42/(0,646) PD ,50/(0,846) PD ,58/(1,046) PD ,66/(1,246)

4 RD-Series Right Angle DIP / abgewinkelter DIP Mechanical Life: min switch operations each Electrical Life: min switch operation each Operation force: less than 800 g Switching:... Mechanische Lebenserwartung: min Schaltoperation Elektrische Lebenserwartung: min Schaltoperation Schaltkraft: kleiner 800 g Dauerlast: 100 ma, 50 VDC Scahltlast: max Schaltung: einpoliger Schalter Example: RDR-12-N is a Right Angle DIP with 12 positions, raised actuator, On is up (= Off is up) and No Sealing Tape RD ,08/(0,239) RD ,62/(0,339) RD ,16/(0,439) RD ,7/(0,539) RD ,24/(0,639) RD ,78/(0,739) RD ,32/(0,839) RD ,86/(0,939) RD ,4/(1,039) RD ,4/(1,239)

5 LD-Series Low Profile, IC-machine insertable Features / Eigenschaften 1., Straight pinning for manual insertion 2., Splayed pinning for automatic insertion by IC insertion machines 3., LPR (raised actuator) & LPF Series (flat actuator) 4., Double contact pair for high reliability 5., Insert molding of pins and ultrasonic welding prevent flux from entering component, 6., optional tape sealing allows safe washing process 7., ultra low profile, height of body only 3,5 mm Materials / Materialen Base & Cover: ULV94-VO, glassfiber reinforced PBT color: black, blue Actuator: UL94-VO, glassfiber reinforced PBT color: white Contact: Beryllium-Copper Terminals: Brass Contact plating: 3 microinches gold over 50 microinches nickel Pin plating: tin/lead 90/10 Mechanical Life: min switch operations each Electrical Life: min switch operation each Temperature: operation 40 ºC +85 ºC Operation force: less than 800 g Stroke: 1,0 mm Switching: Vibration test: MIL STD 202F, Method 201A Frequency Hz/1 min Directions: x, y, z, mutually perpendicular, time: 2 hours eachdirection, No contact failure after test. Shock test: MIL STD 202F, Method 213B Condition A Gravity: 50 g (peak value) 11 ms, Directions and times: 10 shocks in each mutual perpendicular planes. No contact failures after test Other specs: same as other series, see page 7 LP ,88/(0,231) LP ,96/(0,431) LP ,04/(0,631) LP ,26/(0,837) LP ,20/(1,031)

6 New / Neu SMD-Series Low Profile SMD / Pick & Placeable Features / Eigenschaften 1., Tape Seal Type for Automatic Pick & Place 2., Extremly reliable for mobile applications and harsh environment 3., SMDR (raised actuator) DMDF Series (flat actuator) 4., Double contact pair for high reliability 5., Insert molding of pins and ultrasonic welding prevent flux from entering component and allows washing process with optional sealing tape, 6., low profile, height of body only 3,5 mm Materials / Materialen Base & Cover: ULV94-VO, glassfiber reinforced PBT color: black Actuator: UL94-VO, glassfiber reinforced PBT color: white Contact: Beryllium-Copper Terminals: Brass Contact plating: 3 microinches gold over 50 microinches nickel Pin plating: tin/lead 90/10 Mechanical Life: min switch operations each Electrical Life: min switch operation each Temperature: operation 40 ºC +85 ºC Soldering: No Clean colder creams suitable, Reflow at 235 ºC ask for just in time delivery to keep datecodes under 6 months Operation force: less than 800 g Switching: Vibration test: MIL STD 202F, Method 201A Frequency Hz/1 min Directions: x, y, z, mutually perpendicular, time: each direction, Nocontact failure after test. Shock test: MIL STD 202F, Method 213B Condition A Gravity: 50 g (peak value) 11 ms, Directions and times: 10 shocks in each mutual perpendicular planes. No contact failures after test SMD ,88/(0,231) SMD ,96/(0,431) SMD ,04/(0,631) SMD ,26/(0,837) SMD ,20/(1,031)

7 Electrical & Mechanical Specification / Elektrische & mechanische Spezifikation: Serie RD, SD, PD Contact rating / Schaltleistung, Load / Last a. 50VDC, 100 ma at steady / Dauerlast b. 24VDC, 50 ma switching / Schaltleistung Contact resistance / Kontaktwiderstand a. 30mOhm max. at initial / Anlieferzustand b. 100mOhm max. after life test / Lebensende Lifetime/Lebenserwartung a. electrically minimum cycles at 50mA, 24VDC b. mechanically minimum acc. type Insulation resistance (at/bei 500 VDC): Mohm min. between terminals / Anschluß zu Anschluß Capacities/Kapazität: 5pF between terminals / Anschluß zu Anschluß Dielectric Breakdown Voltage / Isolationsdurchbruchsspannung: 500VDC / 1 min. Operating temperature/betriebstemperaturen:-40 C C Shock / Schock: 20G, 11 ms, sawtooth, with no contact opening greater than 10 Ns 20g bei 11 ms, Sägezahn, keine Kontaktöffnung größer 10 Ns Vibration: MIL-Std-202F Method 201A, Frequency Hz/1 min. Directions: X, Y, Z, three mutually perpendicular directons : No mechanical damage or intermittent change of switch setting during or after test cycle Marking / Markierungen: customized colors markings optional kundenspezifische Farbe oder Aufdruck möglich Materials & finishes / Materialien & Oberflächenausführungen o Body / Gehäuse: glassfiber-ul94-vo PBT, black / schwarz o Cover / Abdeckung: glassfiber-ul94-vo PBT, red / rot, colors may vary o Actators / Betätiger: glassfiber-ul94-vo PBT, white / weiss o Pins / Anschlüsse: Phosphor-bronze, 3 N inches Gold over Nickel, other thickness or silverplatin on request Phosphor-bronze, Hauchvergoldung über Nickel, andere Schichtstärken oder Silberplattierung auf Anfrage Molded in pins prevent flux from entering component body, top seal use allows Components being washed. Check compatibility with cleaning agent supplier. Heiß eingepreßte Pins verhindern den Flußmitteleintritt in den Schalter. Bei Bestellung mit Abdeckklebeblatt sind die Schalter waschbar. Holen Sie dazu die Verträglichkeit mit den Reinigungsmedium von Ihrem Reinigungsmittellieferanten ein. o Top seal / Abdeckklebeband: Kapton / Polysiloxane Packaging / Verpackung All DIP switches are shipped in standard IC tubes with all poles in OFF position. All DIP switches are to be soldered in OFF position only. Alle DIP Schalter werden standardmäßig in IC Stangen geliefert. Die Schalterposition ist OFF. Alle Schalter ausschließlich sind in der OFF Position zu löten. Recommended Soldering & Cleaning Procedures / Löt -& und Reinigungshinweise For best results please follow these recommandations / Bitte beachten Sie die folgenden Hinweise: o Wave soldering max 255 C for max 5 sec./ Wellenlöten 255 C für max 5 sec. o Handsoldering / Handlöte: ca. 30 W electronic iron / elektronischer Lötkolben max 320 C for max 3 sec. o Cleaning / Reinigung: dip or spray, high agitation, vapor max 50 C Manufacturer & Supplier information / Hersteller und Liefranteninformation see next page - umseitig

8